Scribd
Upload
225 views

1.1.1.4 Lab - Installing The CyberOps Workstation Virtual Machine

The document provides instructions for installing a CyberOps Workstation virtual machine. It describes downloading and installing Oracle VirtualBox software on the host computer. It then guides importing a virtual machine image file and starting the virtual machine. The summary provides credentials to log into the virtual machine and describes locating applications like a terminal, file manager, and web browser on the virtual desktop. It also provides commands for checking the virtual machine's IP address and shutting down the virtual machine.

Uploaded by

Geka Shikamaru
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
225 views

1.1.1.4 Lab - Installing The CyberOps Workstation Virtual Machine

The document provides instructions for installing a CyberOps Workstation virtual machine. It describes downloading and installing Oracle VirtualBox software on the host computer. It then guides importing a virtual machine image file and starting the virtual machine. The summary provides credentials to log into the virtual machine and describes locating applications like a terminal, file manager, and web browser on the virtual desktop. It also provides commands for checking the virtual machine's IP address and shutting down the virtual machine.

Uploaded by

Geka Shikamaru
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

Lab – Installing the CyberOps Workstation Virtual Machine

Objectives
Part 1: Prepare a Personal Computer for Virtualization
Part 2: Import a Virtual Machine into VirtualBox Inventory

Background / Scenario
Computing power and resources have increased tremendously over the last 10 years. A benefit of having
multicore processors and large amounts of RAM is the ability to use virtualization. With virtualization, one or
more virtual computers operate inside one physical computer. Virtual computers that run within physical
computers are called virtual machines. Virtual machines are often called guests, and physical computers are
often called hosts. Anyone with a modern computer and operating system can run virtual machines.
A virtual machine image file has been created for you to install on your computer. In this lab, you will
download and import this image file using a desktop virtualization application, such as VirtualBox.

Required Resources
 Computer with a minimum of 2 GB of RAM and 8 GB of free disk space
 High speed Internet access to download Oracle VirtualBox and the virtual machine image file

Part 1: Prepare a Host Computer for Virtualization


In Part 1, you will download and install desktop virtualization software, and also download an image file that
can be used to complete labs throughout the course. For this lab, the virtual machine is running Linux.

Step 1: Download and install VirtualBox.


VMware Player and Oracle VirtualBox are two virtualization programs that you can download and install to
support the image file. In this lab, you will use VirtualBox.
a. Navigate to http://www.oracle.com/technetwork/server-storage/virtualbox/downloads/index.html.
b. Choose and download the appropriate installation file for your operating system.
c. When you have downloaded the VirtualBox installation file, run the installer and accept the default
installation settings.

Step 2: Download the Virtual Machine image file.


The image file was created in accordance with the Open Virtualization Format (OVF). OVF is an open
standard for packaging and distributing virtual appliances. An OVF package has several files placed into one
directory. This directory is then distributed as an OVA package. This package contains all of the OVF files
necessary for the deployment of the virtual machine. The virtual machine used in this lab was exported in
accordance with the OVF standard.
Click here to download the virtual machine image file.

Part 2: Import the Virtual Machine into the VirtualBox Inventory


In Part 2, you will import the virtual machine image into VirtualBox and start the virtual machine.

 Cisco and/or its affiliates. All rights reserved. Cisco Confidential Page 1 of 6 www.netacad.com
Lab - Installing the CyberOps Workstation Virtual Machine

Step 1: Import the virtual machine file into VirtualBox.


a. Open VirtualBox. Click File > Import Appliance... to import the virtual machine image.
b. A new window will appear. Specify the location of the .OVA file and click Next.
c. A new window will appear presenting the settings suggested in the OVA archive. Check the "Reinitialize
the MAC address of all network cards" box at bottom of the window. Leave all other settings as default.
Click Import.
d. When the import process is complete, you will see the new Virtual Machine added to the VirtualBox
inventory in the left panel. The virtual machine is now ready to use.

Step 2: Start the virtual machine and log in.


a. Select the CyberOps Workstation virtual machine.
b. Click the green arrow Start button at the top portion of the VirtualBox application window. If you get the
following dialog box, click Change Network Settings and set your Bridged Adapter. Click the dropdown
list next the Name and choose your network adapter (will vary for each computer).

Note: If your network is not configured with DHCP services, click Change Network Settings and select
NAT in the Attached to dropdown box. The network settings can also be access via Settings in the
Oracle VirtualBox Manager or in the virtual machine menu, select Devices > Network > Network
Settings. You may need to disable and enable the network adaptor for the change to take effect.
c. Click OK. A new window will appear, and the virtual machine boot process will start.

 Cisco and/or its affiliates. All rights reserved. Cisco Confidential Page 2 of 6 www.netacad.com
Lab - Installing the CyberOps Workstation Virtual Machine

d. When the boot process is complete, the virtual machine will ask for a username and password. Use the
following credentials to log into the virtual machine:
Username: analyst
Password: cyberops
You will be presented with a desktop environment: there is a launcher bar at the bottom, icons on the
desktop, and an application menu at the top.
Note: The window running the virtual machine is a completely different computer than your host. Functions,
such as copy and paste, will not work between the two without special software tools installed. Notice the
keyboard and mouse focus. When you click inside the virtual machine window, your mouse and keyboard will
operate the guest operating system. Your host operating system will no longer detect keystrokes or mouse
movements. Press the right CTRL key to return keyboard and mouse focus to the host operating system.

Step 3: Familiarize yourself with the Virtual Machine.


The virtual machine you just installed can be used to complete many of the labs in this course. Familiarize
yourself with the icons in the list below:
The launcher bar icons are (from left to right):
 Show the desktop
 Terminal application
 File manager application
 Web browser application (Firefox)
 File search tool
 Current user's home directory
All course related applications are located under Applications Menu > CyberOPs.
a. List the applications in the CyberOPs menu.
IDLE, SciTE, WireShark
____________________________________________________________________________________
b. Open the Terminal Emulator application. Type ip address at the prompt to determine the IP address of
your virtual machine.
What are the IP addresses assigned to your virtual machine?
IP Address : 10.5.71.99, Subnet Mask : 255.255.255.248.0
____________________________________________________________________________________
c. Locate and launch the web browser application. Can you navigate to your favorite search engine?

 Cisco and/or its affiliates. All rights reserved. Cisco Confidential Page 3 of 6 www.netacad.com
Lab - Installing the CyberOps Workstation Virtual Machine

1) Choose Web Browser

 Cisco and/or its affiliates. All rights reserved. Cisco Confidential Page 4 of 6 www.netacad.com
Lab - Installing the CyberOps Workstation Virtual Machine

2) Then it will appear like this


_____________________________________

Step 4: Shut down the VMs.


When you are done with the VM, you can save the state of VM for future use or shut down the VM.

 Cisco and/or its affiliates. All rights reserved. Cisco Confidential Page 5 of 6 www.netacad.com
Lab - Installing the CyberOps Workstation Virtual Machine

Closing the VM using GUI:


From the Virtual Box File menu, choose Close...
Click the Save the machine state radio button and click OK. The next time you start the virtual machine,
you will be able to resume working in the operating system in its current state.

The other two options are:


Send the shutdown signal: simulates pressing the power button on a physical computer
Power off the machine: simulates pulling the plug on a physical computer
Closing the VM using CLI:
To shut down the VM using the command line, you can use the menu options inside the VM or enter
sudo shutdown -h now command in a terminal window and provide the password cyberops when
prompted.
Rebooting the VM:
If you want to reboot the VM, you can use the menu options inside the VM or enter sudo reboot
command in a terminal and provide the password cyberops when prompted.
Note: You can use the web browser in this virtual machine to research security issues. By using the virtual
machine, you may prevent malware from being installed on your computer.

Reflection
What are the advantages and disadvantages of using a virtual machine?
Advantages: Open Source (Virtual Box), Can Use USB, PATA, SATA, SCSI,and Firewire, Make it possible to
Virtual NICS per-host. Low Memory.
Disadvantages : No Screen Capture, There is no Clone so it is not possible to backup the system.
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________

 Cisco and/or its affiliates. All rights reserved. Cisco Confidential Page 6 of 6 www.netacad.com

You might also like