Scribd
Upload
62 views

ETABS Steel Frame Design: AISC 360-10 Steel Section Check (Strength Summary)

This document summarizes the strength check results for an intermediate steel frame element (C1) located at 2800mm in a structure. The element is designed according to AISC 360-10 and has a demand to capacity ratio of 0.614 for axial force, which is less than the limit of 0.95. All moment and shear demands are zero. The element has sufficient capacity for the axial force and moments based on the specified material properties and cross section dimensions.

Uploaded by

Khaled Abdel Salam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
62 views

ETABS Steel Frame Design: AISC 360-10 Steel Section Check (Strength Summary)

This document summarizes the strength check results for an intermediate steel frame element (C1) located at 2800mm in a structure. The element is designed according to AISC 360-10 and has a demand to capacity ratio of 0.614 for axial force, which is less than the limit of 0.95. All moment and shear demands are zero. The element has sufficient capacity for the axial force and moments based on the specified material properties and cross section dimensions.

Uploaded by

Khaled Abdel Salam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ETABS 17.0.

1 License #*12J6TZZ9H7D84MC

ETABS Steel Frame Design


AISC 360-10 Steel Section Check (Strength Summary)

Element Details

Level Element Unique Name Location (mm) Combo Element Type Section Classification
Story1 C1 2 2800 Comb1 Intermediate Moment Frame FSec2 Non-Compact

LLRF and Demand/Capacity Ratio

L (mm) LLRF Stress Ratio Limit


3000.0 1 0.95

Analysis and Design Parameters

Provision Analysis 2nd Order Reduction


LRFD Direct Analysis General 2nd Order Tau-b Fixed

Stiffness Reduction Factors

αP r /P y αP r /P e τb EA factor EI factor
0.432 0.255 1 0.8 0.8

Design Code Parameters

Φb Φc Φ TY Φ TF ΦV Φ V-RI Φ VT
0.9 0.9 0.9 0.75 0.9 1 1

Section Properties

A (cm²) J (cm⁴) I 33 (cm⁴) I 22 (cm⁴) A v3 (cm²) A v2 (cm²)


39.2 26.6 2893.5 933.7 25.1 12

Design Properties

S 33 (cm³) S 22 (cm³) Z 33 (cm³) Z 22 (cm³) r 33 (mm) r 22 (mm) C w (cm⁶)


264.9 93.4 315.6 141.7 86 48.8

Material Properties

E (MPa) f y (MPa) Ry α
200000 355 1 NA

Stress Check forces and Moments

Location (mm) P u (kN) M u33 (kN-m) M u22 (kN-m) V u2 (kN) V u3 (kN) T u (kN-m)
2800 -600 0 0 0 0 0

Axial Force & Biaxial Moment Design Factors (H1-1a)

L Factor K1 K2 B1 B2 Cm
Major Bending 0.933 1 1 1 1 1
Minor Bending 0.933 1 1 1 1 1

Parameters for Lateral Torsion Buckling

L ltb K ltb Cb
0.933 1 1

COMPRESSION MEMBER.EDB Page 1 of 2 6/27/2019


ETABS 17.0.1 License #*12J6TZZ9H7D84MC

Demand/Capacity (D/C) Ratio Eqn.(H1-1a)

(P r /P c ) + (8/9)(M r33 /M c33 ) + (8/9)(M r22


D/C Ratio =
/M c22 )
0.614 = 0.614 + 0 + 0

Axial Force and Capacities

P u Force (kN) ϕP nc Capacity (kN) ϕP nt Capacity (kN)


600 976.8242 1251.162

Moments and Capacities

M u Moment (kN-m) ϕM n (kN-m) ϕM n No LTB (kN-m) ϕM n Cb=1 (kN-m)


Major Bending 0 84.6463 84.6463 84.6463
Minor Bending 0 29.8307

Shear Design

V u Force (kN) ϕV n Capacity (kN) Stress Ratio


Major Shear 0 229.469 0
Minor Shear 0 480.2859 0

COMPRESSION MEMBER.EDB Page 2 of 2 6/27/2019

You might also like