Scribd
Upload
94 views1 page

262 CID (4.3L) ENGINES Service Manual Number 25: Page 3A-44 90-861328 - 1 NOVEMBER 1999

This document provides instructions for servicing 262 CID engines, including coating cylinder head bolts with sealant, installing the bolts finger-tight, and torquing the bolts in two steps - first to 22 lb-ft uniformly and then in a specified angle sequence with the short bolt torqued to +55 degrees, medium to +65 degrees, and long to +75 degrees.

Uploaded by

Jason William
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
94 views1 page

262 CID (4.3L) ENGINES Service Manual Number 25: Page 3A-44 90-861328 - 1 NOVEMBER 1999

This document provides instructions for servicing 262 CID engines, including coating cylinder head bolts with sealant, installing the bolts finger-tight, and torquing the bolts in two steps - first to 22 lb-ft uniformly and then in a specified angle sequence with the short bolt torqued to +55 degrees, medium to +65 degrees, and long to +75 degrees.

Uploaded by

Jason William
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

262 CID (4.

3L) ENGINES SERVICE MANUAL NUMBER 25

3. Coat threads of head bolts with Quicksilver Perfect Seal and install finger-tight.

76589

4. Torque cylinder heads in two steps. First pass, torque all bolts to 22 lb-ft (30 Nm).
Second pass is an angle torque sequence as follows:

Short Bolt
First Pass Medium Bolt 22 lb-ft (30 Nm)
Long Bolt
Short Bolt + 55 Degrees
Second Pass
Medium Bolt + 65 Degrees
(Angle Torque)
Long Bolt + 75 Degrees

72883

Cylinder Head Torque Sequence


a - Front

Page 3A-44 90-861328--1 NOVEMBER 1999

You might also like