Scribd
Upload
104 views2 pages

Cd-4Mcu: Alloy Data Sheet

CD-4MCu is a corrosion resistant alloy with a duplex structure of ferrite and austenite, giving it moderately high strength, hardness, and good ductility. It has superior resistance to abrasion, erosion-corrosion, and stress-corrosion cracking in chloride environments. Common applications include compressor cylinders and pump casings. The alloy can be cast into complex shapes and welded using common welding methods.

Uploaded by

Flowline Pumps
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
104 views2 pages

Cd-4Mcu: Alloy Data Sheet

CD-4MCu is a corrosion resistant alloy with a duplex structure of ferrite and austenite, giving it moderately high strength, hardness, and good ductility. It has superior resistance to abrasion, erosion-corrosion, and stress-corrosion cracking in chloride environments. Common applications include compressor cylinders and pump casings. The alloy can be cast into complex shapes and welded using common welding methods.

Uploaded by

Flowline Pumps
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

25 Commerce Road, Orillia, Ontario, Canada L3V 6L6

Phone (705) 325-2781 Fax (705) 325-5887

ALLOY DATA SHEET CORROSION RESISTANT ALLOY

CD-4MCu REVISION: 01/90

DESCRIPTION
FCD-4MCu is an Fe-Cr-Ni-Cu-Mo alloy with a duplex structure of ferrite and austenite. Moderately high strength
and hardness are combined with good ductility and impact properties,.resulting in an alloy with superior
resistance to abrasion or erosion-corrosion. In chloride bearing environments the alloy is highly resistant to
stress-corrosion cracking. Resistance to nitric and sulphuric acids is high. Castings are most commonly used in
the solution annealed condition.

COMPOSITION
C Mn Si Cr Ni P S Cu Mo
Min % 24.5 4.75 2.75 1.75
Max % 0.04 1.0 1.0 26.5 6.0 0.04 0.04 3.25 2.25

APPLICATIONS
Compressor cylinder, digester valves, feed screws, impellers, pump casings and liners, marine light fittings, seal
rings.

PRODUCT FORMS
Horizontal and vertical centrifugal castings; static castings.

PHYSICAL PROPERTIES
Density (lbs/in3) 0.280

Liquidus( oF) 2700

Thermal Conductivity 8.8 @ 212oF


(Btu/h/ft2/ft/oF) 13.4 @ 1000oF

Thermal Expansion 70-212oF 6.3


(10-6in/in oF) 70-600oF 6.6
70-1000oF 6.9
70-1200oF 7.0

Magnetic Permeability Ferromagnetic

MECHANICAL PROPERTIES
(Typical Values - Solution Annealed 2050oF, Slow Cooled.to1900oF, Water Quenched.)

Temperature
-100 0 70 200 400 600 800 1000 1100oF
U.T.S. K.S.I. 108 100 93 91 89 76 59
Y.S. K.S.I. 82 71 60 58 55 48 40
Elong. % 27 26 24 22 21 23 34
R.A. % 48 41 34 29 35 50
Brinell H B 253
Charpy 'V' ft-lbs 22 51 55
C0RR0SION RESISTANT ALLOY CD-4MCu Page 2

WELDABILITY
CD-4MCu may be welded by the SMAW and GTAW processes.
Electrodes Same composition.
Preheat Not required.
Post weld heat treatment Heat to 2050oF cool to 1900oF and quench.
Procedures for welding CD-4MCu alloy are available from Kubota Metal Corporation.

RELATED SPECIFICATIONS
ASTM: A351(CD-4MCu), A743(CD-4MCu), A744(CD-4MCu)
Nearest wrought grade: None.

HEAD OFFICE, FOUNDRY & INTERNATIONAL SALES


Kubota Metal Corporation, Fahramet Division
25 Commerce Road, P.O. Box 1700,
Orillia, Ontario, Canada, L3V 6L6.
Phone (705) 325-2781
Fax (705) 325 5887

You might also like