1/31/2019 Conversion Tables

| Elastic Constants | Strength | Density, Thermal Coefficients | Back

| Unit Conversions |

Table 4. Unit Conversions

The S.I. and English Systems

The System International (International Standard System) use newtons (N) and meters (m)
for its units of force and length. The U.S.Customary System (English, imperial, engineering
system) uses pounds (lb) and feet (ft) or inches (in.). The unit of time, seconds (s, sec) is the
same in both systems.

Below are tables that convert units from USCS to S.I. and back (e.g., 1 meter = 39.4 inches),
as well as common conversions within each system (e.g., 1 ft = 12 inches). In general, the
Conversion Factors are listed to 6 significant digits (even though your answers need not be
that precise).

4a. Geometric Conversions

4b. Force and Stress Conversions
4c. Same System Conversions|
4d. Pounds, Newtons & Kilograms; Density
4e. Temperature

Online resources. A useful interactive conversion tool, with many more units, is Engineering
Exchange's Unit Conversion widget. Another tool, Convert, by Joshua Madison, may be
downloaded here (remember, pressure has the same units as stress).

Some approximate (within 2%) conversions useful in engineering mechanics (i.e.,

statics, dynamics, strength of materials):
1 lb - 4.5 N
1 in. = 25 mm
1 m ~ 40 in. ~ 3.25 ft
1 ksi ~ 7 MPa (1 psi ~ 7 kPa); multiply by 7 and increase prefix by 3 order of
magnitude

4a. Lengths, Areas and Volumes - English Units to S.I. Units and Back
Underlined values represent an exact conversion factor.

To Convert From multiply to get / To Convert from multiply by to get

Length
inches, in. 25.4 millimeters, mm 0.0393701 inches, in.
inches, in. 0.0254 meters, m 39.3701 inches, in.
feet, ft 0.3048 meters, m 3.280840 feet, ft
yards, yd 0.9144 meters, m 1.09361 yards, yd
miles, mi 1.609344 kilometers, km 0.621371 miles, mi
Area
square inch, in2, si 645.16 square millimeters, mm2 0.00155000 square inch, in2

square inch, in2, si 0.00064516 square meter, m2 1550.00 square inch, in2

square feet, ft2, sf 0.09290304 square meter, m2 10.7639 square feet, ft2, sf

square yard, yd2, sy 0.836127 square meter, m2 1.19599 square yard, yd2
Volume
cubic inch, in3, ci 16387.064 cubic millimeters, mm3 61.0237 x 10-6 cubic inch, in3
http://ah-engr.com/resources/table_unit_conversion.htm 1/4
 inch, in3, ci
1/31/2019
cubic 16.387064 cubic centimeters, cc, cm3 0.06102374 cubic inch, in3
Conversion Tables

cubic foot, ft3, cf 0.0283168 cubic meters, m3 35.3147 cubic foot, ft3, cf

cubic yard, yd3, cy 0.764555 cubic meters, m3 1.30795 cubic yard, yd3
gallon, gal. 3.78541 liters, l = 0.001 m3 0.264172 gallon, gal.
Other Geometric Properties of a Cross-section
Moment of Inertia, in4 416231 mm4 = 10-12 m4 2.402 x 10-6 in4

Section Modulus, in3 16387.064 mm3 = 10-9 m3 61.0237 x 10-6 in3

| Top | Geometric Conversions | Force and Stress Conversions |

| Same System Conversions | Pounds, Newtons & Kilograms; Density | Temperature |

4b. Force, Stress, Loads and Mass - English Units to S.I. Units and Back

To Convert From multiply to get / To Convert from multiply by to get

Force
pound, lb 4.44822 newton, N 0.224809 lb
kilopound, kip = 1000
4.44822 kilonewton, kN = 1000 N 0.224809 kip = 1000 lb
lb
Stress [Force per Unit Area]
pounds per sq. ft, lb/ft2, 47.8803 pascals, Pa = N/m2 0.0208854 lb/ft2, psf
psf
psf 0.0478803 kilopascal, kPa, kN/m2 20.8854 psf
kilopounds per sq. ft,
47.8803 kPa 0.0208854 ksf
ksf
pounds per sq. inch, psi 6894.76 Pa 0.000145038 psi
psi 6.89476 kPa 0.145038 psi
kilopounds per sq. in, megapascal, MPa
6.89476 0.145038 ksi
ksi = MN/m2 = N/mm2
Bending Moment, Torque [Force x Length]
pound-foot, lb-ft 1.35582 newton-meter, N-m 0.737561 lb-ft
pound-inch, lb-in 0.112985 N-m 8.850732 lb-in
Distributed Load [Force per Unit Length]
pounds per (linear)
14.5939 newtons per meter, N/m 0.06852178 plf
foot, plf
pounds per (linear)
175.127 N/m 0.00571015 pli
inch, pli

| Top | Geometric Conversions | Force and Stress Conversions |

| Same System Conversions | Pounds, Newtons & Kilograms; Density | Temperature |

4c. Same System Conversions; "Things you should know"

From Multiply by to get / To Convert from multiply by to get

Length
in 0.083333 feet, ft 12 in
ft 0.333333 yards, yd 3 ft
ft 1.89393 x10-4 miles, mi 5280 feet, ft
mm 0.001 meters, m 1000 mm
cm 0.01 m 100 cm
Area
in2 http://ah-engr.com/resources/table_unit_conversion.htm
0.00694444 ft2 144 in2 2/4
 1/31/2019 Conversion Tables
ft2 0.111111 yd2 2
9 ft
Time
second,
0.0166666 minutes, min 60 s, sec
s (SI), sec (US)
second 2.77777 x10-4 hour, h 3600 s, sec
second 1.1574 x 10-5 day, d 86400 s, sec
minutes, min 6.9444 x10-4 day,d 1440 min
Weight
lb 0.005 ton (U.S.) 2000 lb
lb 0.0025 kips (U.S.) 1000 lb

| Top | Geometric Conversions | Force and Stress Conversions |

| Same System Conversions | Pounds, Newtons & Kilograms; Density | Temperature |

4d. Force, Weight and Density - English Units to S.I. Units and Back

Caution! In the S.I. system, "weight" is often expressed in kilograms (or kilogram-force,
kgf). One (1.0) kgf is the force required to accelerate 1.0 kg mass by 1.0 m/s2. "Weight"
given in kilograms must be converted to force: the weight of 1.0 kg mass is 9.81 N (in
standard gravity)

To Convert From Multiply by to get / To Convert from multiply by to get

Pounds, Newtons and Kilograms
pounds, lb 4.44822 newton, N 0.224809 lb
kilopounds, kips 4.44822 kilonewton, kN 0.224809 kips
lb 0.453592 kg 2.20462 lb
N 0.101972 kg 9.80665 N
lb 0.0310 slug (lb-s2/ft) 32.2 lb
Weight Density (force/volume); including kilogram force (kgf)
lb / ft3 0.157087 kilonewtons per kN/m3 6.36590 lb / ft3

lb / in3 271.447 kN/m3 0.00368 lb / in3

lb / in3 0.000578703 lb / ft3 1728 lb / in3

N / m3 0.101972 kg / m3 9.80665 N / m3

kN / m3 101.972 kg / m3 0.0090665 kN / m3

lb / ft3 16.0185 kg / m3 0.0624279 lb / ft3

Mass Density (mass/volume)
slug / ft3 515.379 kg / m3 0.0019403 slug / ft3

| Top | Geometric Conversions | Force and Stress Conversions |

| Same System Conversions | Pounds, Newtons & Kilograms; Density | Temperature |

4e. Temperature Conversions

To Convert From, use function to get / To Convert from use function to get
degrees fahrenheit, °F (5/9)(F – 32) degrees centigrade, °C 1.8 C + 32 degrees fahrenheit, °F
°F F + 459.67 degrees Rankine, R R – 459.67 °F
degrees centigrade, °C C + 273.15 degrees Kelvin, K K – 273.15 °C
change in °F (or R) (5/9)(D°F) change in deg. °C (or K) 1.8(D°C) change in °F (or R)

| Top | Geometric Conversions | Force and Stress Conversions |

| Same System Conversions | Pounds, Newtons & Kilograms; Density | Temperature |
http://ah-engr.com/resources/table_unit_conversion.htm 3/4