SGen-2000P pressurized
air-cooled generator series
for gas and steam power applications
from 370 MVA – 560 MVA
The innovative SGen-2000P series combines proven Siemens
technologies and is an ideal fit for your requirements in flexi- Key benefits
ble or base load power plant operation. Our modular “building
block” approach allows Siemens generators to share many fea-
• Hydrogen eliminated
tures and components across the portfolio making them even • Low CAPEX, low OPEX
more reliable, efficient and easy-to-maintain. The SGen-2000P • Proven technology
• High operational flexibility
series is an excellent solution for high-power applications as
• ISO class zone-A
well as synchronous condensing applications where grid sta- • Reduced complexity
bility is needed. • Remote operation possible
1 Stator: Fleet-proven design of water-
cooled stator bars with hollow stainless
steel conductors
7 2 Static excitation: integral to the rotor
shaft, without extra bearing or coupling
2 1
interface
3 Stator frame: robust design with simpli-
fied plant interfaces
4 Access points: multiple locations for easy
6 maintenance
4 3 5 Coolers: flexible based on operational
needs; fully integrated into generator base
5
6 Rotor: 10,000 start/stop cycles without
rotor removal during operational life cycle
Simple ventilation: up to 1 bar (gauge)
7
for extended capability and performance
optimization
siemens.com/energy
siemens.com/generators
The SGen-2000P series fits many applications
Gas & steam power generation Synchronous condenser
• Flexible integration into combined cycle • Grid stabilizer for increasing integration of renewable
power plants or steam tailing applications. power sources into the transmission system
• Large simple or combined cycle power • Ancillary services to the transmission system:
plants, suitable for all duty cycles:
– Reactive power compensation
– Peaker applications – Short circuit power
– Intermediate or base load applications – Added inertia to the transmission system
– Cogeneration applications – Short term overload capability
Technical specifications for the SGen-2000P generator series
Frequency Apparent Efficiency Design Terminal Design Approx.
power power factor voltage insulation class weight
SGen5-2000P 50Hz 370 – 545 MVA Up to 99% 0.80 Up to 20 kV Class F Up to 370t
SGen6-2000P 60Hz 370 – 560 MVA Up to 99% 0.85 Up to 20 kV Class F Up to 370t
SGen-2000P generator series: simple installation, flexible operation and
easy maintenance
Plug & play installation:
• Easy on-site assembly
• Footprint requires minimal space
• Simple foundation interface
High operational flexibility:
• Efficiency level comparable to traditional For more information, please
hydrogen-cooled generators contact our Customer Support
Center.
• Water-cooled stator winding; high cycling Phone: +49 180/524 70 00
capability Fax: +49 180/524 24 71
• Maximized rotor life through rotor winding (Charges depending on provider)
E-mail: sales.generator.energy@
temperature control siemens.com
• Simple operation with improved safety
www.siemens.com/generators
and no risk for oil contamination (no hy-
drogen) Article No. PGGT-T10028-00-7600
Easy maintenance:
Subject to changes and errors. The
information given in this document
• Fewer spare parts needed
only contains general descriptions
• Elimination of hydrogen and related and/or performance features which
equipment in output ranges traditionally may not always specifically reflect
those described, or which may
reserved for H2
undergo modification in the course
• Unstaffed operation possible of further development of the pro-
ducts. The requested performance
features are binding only when
they are expressly agreed upon in
the concluded contract.
