Design Features

The 40SA Series encoder is ideal for applications requiring a miniature, high precision, but low cost encoder. Bores are available from 4mm to 15mm
CONTACT INDUSTRIAL ENCODERS DIRECT FOR MORE INFORMATION:TEL:+44 (0)1978 664722

Specifications

Input Voltage range .................... 5/24V (see output circuits) Starting torque ............................ 0.001 Nm (normal or hollow shaft)
Regulation, for 5V operation ....... 5%, with 2% maximum ripple Radial loading (normal shaft) ...... 8 N operating
Current consumption ................... 80mA typical Axial loading (normal shaft) ......... 4.5 N operating
Output circuits ............................. See Ordering Information Radial loading (hollow shaft) ....... Being the mass of the encoder
Frequency response ................... Depends on model (Contact Sales Desk) Axial loading (hollow shaft) ......... Being the mass of the encoder
Symmetry .................................... 180° electrical ±5% (±9°e) Host shaft max. TIR ..................... 0.15mm
Quadrature Phasing .................... 90° electrical ±10% (±9°e) Host shaft max. endplay .............. ±0.70mm
Minimum edge separation ........... 72° electrical Moment of inertia ........................ 20 g/cm
Reference marker pulse .............. Gated (A • B • Z = F) [A • Z = F optional] Acceleration ................................ 105 radians/sec2
Rise time ..................................... Less than 1 microsecond Weight ......................................... 0.2 kg
Accuracy (cycle to cycle) ............. ±0.017° or 1 Arc/Min Housing ....................................... Aluminum w/protective finish
LED life .......................................100,000 hrs typical Operating temperature ................ 0°C to +70°C
Pulses per revolution ................... See Ordering Information Storage temperature ................... –25°C to +85°C
Max shaft speed .......................... 7,500 rpm continuous Humidity ...................................... 98% RHNC
Shaft sizes and types ................. See ordering information Vibration ...................................... 10 G’s @ 58 to 500 Hz
Shaft tolerance ............................ Hollow: H7, sliding fit for g6 Shock .......................................... 50 G’s for 11 mSec
Standard: g6, sliding fit for H7 Protection .................................... IP54
Bearings ...................................... Double Sealed ABEC 3 IP64 by special order

Ordering Information

40SA Range Shaft VCC/

Output Circuit
PPR Fixing

1 = 0.250” hollow
2 = 0.375” hollow
1 = 0001 - 1000 PPR 1 PPR to STD = Standard Flex
3 = 4mm hollow
2 = 1024 - 3000 PPR 30,000PPR SFM = Slotted Flex Mount
4 = 6mm hollow
3 = 3600 - 10000 PPR
5 = 10mm hollow
4 = 10240 - 30000 PPR
6 = 6mm shaft, 10mm long
7 = 0.250”” shaft, 0.270” long
8 = 5mm shaft, 10mm long
A = 8mm hollow
B = 9mm hollow

HV = 5/24V RS422 Differential Driver

PP = 5/24V Push Pull
OC = 5/24V NPN Open Collector
 Output Circuits
HV + 4·7 /28VCC PP + 4·7/28VCC OC + 4·7/28VCC
(per channel) Push-Pull NPN Open (per channel)
Universal
20mA Collector
Differential
7272 Output 7272 7273 Output
Line Driver
Output
50mA
Output N/C 20mA N/C
0V 0 Volts 0V

Dimensions