Scribd
Upload
101 views

Lateral

This document provides specifications for wrought carbon steel butt weld pipe fittings made by TK Corporation, including nominal pipe sizes from 1 to 24 inches. It lists dimensions for standard (STD) and extra strong (XS) type fittings of various sizes, including outside diameter, center to end dimensions, wall thickness, and inside diameter. It also provides weight information and notes that laterals are rated for 40% or 100% of the maximum allowable working pressure of the mating pipe depending on use, in accordance with ASME standards.

Uploaded by

Mukesh Shah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
101 views

Lateral

This document provides specifications for wrought carbon steel butt weld pipe fittings made by TK Corporation, including nominal pipe sizes from 1 to 24 inches. It lists dimensions for standard (STD) and extra strong (XS) type fittings of various sizes, including outside diameter, center to end dimensions, wall thickness, and inside diameter. It also provides weight information and notes that laterals are rated for 40% or 100% of the maximum allowable working pressure of the mating pipe depending on use, in accordance with ASME standards.

Uploaded by

Mukesh Shah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Wrought Carbon Steel Butt Weld Pipe Fittings | TK corporation |

ASME (Inch)
Lateral - B, C
STD, XS (Type B, Type C)

MAKER STD (Unit : inch)

STD X-S
Nominal
Outside
Pipe Center to End Wall Insid
Type Diameter Weight Center to End Dimension Wall Thick. Insid Dim. Weight
Size of Dimension Thick. Dim.
O.D (kg) (kg)
Run
L&E D T I.D L&E D T I.D
1 B 1.315 5.75 1.75 0.133 1.049 1.049 6.50 2.00 0.179 0.957 1.049
1-1/4 B 1.660 6.25 1.75 0.140 1.380 1.380 7.25 2.25 0.191 1.278 1.380
1-1/2 B 1.900 7.00 2.00 0.145 1.610 1.610 8.50 2.50 0.200 1.500 1.610
2 B/C 2.375 8.00 2.50 0.154 2.067 2.067 *9.00 **8.00 2.50 0.218 1.939 2.067
2-1/2 B 2.875 9.50 2.50 0.203 2.469 2.469 10.50 2.50 0.276 2.323 2.469
3 B 3.500 10.00 3.00 0.216 3.068 3.068 11.00 3.00 0.300 2.900 3.068
3-1/2 B 4.000 11.50 3.00 0.226 3.548 3.548 12.50 3.00 0.318 3.364 3.548
4 B/C 4.500 12.00 3.00 0.237 4.026 4.026 *13.50 **12.50 3.00 0.337 3.826 4.026
5 B 5.562 13.50 3.50 0.258 5.047 5.047 15.00 3.50 0.375 4.813 5.047
6 B/C 6.625 14.50 3.50 0.280 6.065 6.065 *17.50 **14.50 *4.00 **3.50 0.432 5.761 6.065
8 B 8.625 17.50 4.50 0.322 7.981 7.981 20.50 5.00 0.500 7.625 7.981
10 B 10.750 20.50 5.00 0.365 10.020 10.020 24.00 5.50 0.500 9.750 10.020
12 B 12.750 24.50 5.50 0.375 12.000 12.000 27.50 6.00 0.500 11.750 12.000
14 B 14.000 27.00 6.00 0.375 13.250 13.250 31.00 6.50 0.500 13.000 13.250
16 B 16.000 30.00 6.50 0.375 15.250 15.250 34.50 7.50 0.500 15.000 15.250
18 B 18.000 32.00 7.00 0.375 17.250 17.250 37.50 8.00 0.500 17.000 17.250
20 B 20.000 35.00 8.00 0.375 19.250 19.250 40.50 8.50 0.500 19.000 19.250
24 B 24.000 40.50 9.00 0.375 23.250 23.250 47.50 10.00 0.500 23.000 23.250

* B TYPE, ** C TYPE

Presure-temperature ratings : Laterals are rated for either 40% of the maximum allowable
working pressure for the size and weight schedule of the mating pipe, or 100% of the
maximum allowable working pressue for the size and weight schedule of the mating pipe in
the latter case, ASME B31.3 is used to calculate reinforcement requirements unless 074
otherwise specified.
Wall Thickness Conform to ASME B 36.10M Specifications
075

You might also like