Scribd
Upload
80 views

Service Report Form PAC

This document appears to be a work order for servicing a PAC (presumably a packaged air conditioning) unit. It includes details about the customer, location, unit model and serial numbers, type of service requested, refrigerant and pipe specifications, pre-commissioning checks performed, measurement readings taken, and spaces to note any problems, recommendations, or work done. The format and level of technical detail suggest this is a form used by HVAC technicians to document a service call for a commercial air conditioning system.

Uploaded by

jono
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
80 views

Service Report Form PAC

This document appears to be a work order for servicing a PAC (presumably a packaged air conditioning) unit. It includes details about the customer, location, unit model and serial numbers, type of service requested, refrigerant and pipe specifications, pre-commissioning checks performed, measurement readings taken, and spaces to note any problems, recommendations, or work done. The format and level of technical detail suggest this is a form used by HVAC technicians to document a service call for a commercial air conditioning system.

Uploaded by

jono
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Work Order No./No. SPK : Service Date/Tgl.

Kerja : / /
Customer/End User : Address/Location :
Name Tag PAC : Room Name :
PAC Type/Model : Condenser Unit Type :
PAC Serial No. : Condenser Serial No. :
Status Type :  Warranty  Contract  Non Contract  Chargeable  No Charge
Service Type :  Test & Comm.  Maintenance  Troubleshooting  Spare Parts Replacement
 Others :
PAC Cooling System :  Air Cooled  Water Cooled  Chilled Water  Dual Cooled
 Others :

Pre Commissioning Other Works


Refrigerant type :  R407C  R410A  R134A  1. Air filter cleaning  Yes  No
Refrigerant pipes sizes : a. Hot gas : " b. Liquid : " 2. Condenser unit cleaning  Yes  No
c. Total length : M d. Add oil : mL 3. Condenser fans check up  Yes  No
1. Refrigerant pipeline check up  Yes  No 4. Drainage pipes cleaning  Yes  No
2. Pressure test with Nitrogen 1 x 24 Hours Psi  Yes  No 5. Strainer check up  Yes  No
3. Pipes installation for humidifier water supply  Yes  No 6. Valve operation check up  Yes  No
4. Vacum process Micron  Yes  No 7. Compressor oil level  Yes  No
5. Drainage leveling check up  Yes  No 8. Water flow check up  Yes  No
6. Electrical termination check up  Yes  No 9. Alarm testing:  Yes  No
7. Phase rotation check up  Yes  No a.
8. Remove all debris from unit area  Yes  No b.

Components Unit Measurement Result Components Unit Measurement Result


Main Voltage Supply 3 Phase RS ST TR Refrigerant pressure Suction Discharge
Vac Compressor 1 Psi
1 Phase RN SN TN Compressor 2 Psi
Vac Comp. 1 Comp. 2
Frequency Hz Superheat K
Current 3 Phase R S T Water Cooled/Chilled Water Inlet Outlet
Supply Fan A Water Temperature °C
Compressor 1 A Water Pressure kgf/cm
Compressor 2 A Parameter Setting Set point Actual
Heater 1 A Return Air Temperature °C
Heater 2 A Return Air Humidity %
Humidifier A Min Max
Supply Fan %
Supply Fan CW (DF) %
Condenser Units Unit Fan 1 Fan 2 Fan 3 Fan 4 Start Temp. Hyst.
Condenser 1 A Compressor 1 °C/K
Condenser 2 A Compressor 2 °C/K

Other Measurement

Notes/Problem and Analysis/Recommendation/Action Taken Service Completed By Customer Approval By

You might also like