Scribd
Upload
350 views

Pixhawk4 Technical Data Sheet PDF

Uploaded by

Restu Aminullah
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
350 views

Pixhawk4 Technical Data Sheet PDF

Uploaded by

Restu Aminullah
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Product Features

•• A new and smaller form factor


•• More computing power and 2X the RAM of
previous versions
•• New sensors with higher temperature stability
•• Integrated vibration isolation
•• Increased ease-of-use: pre-installed with the
most recent PX4 firmware
•• Additional ports for better integration and
expansion

Pixhawk® 4 is the latest update to the successful family of Pixhawk flight controllers. It was
designed and developed in collaboration with Holybro and the PX4 team, optimized to run
the full Dronecode stack, and comes pre-installed with the latest PX4 firmware.

It features the latest advanced processor technology from STMicroelectronics®, sensor


technology from Bosch® and InvenSense®, and a NuttX real-time operating system, de-
livering incredible performance, flexibility, and reliability for controlling any autonomous
vehicle.

Pixhawk 4’s microcontroller now has 2 MB of Flash memory and 512 KB of RAM. With the
increased power and RAM resources developers can be more productive and efficient with
their development work. More complex algorithms and models can be implemented on the
autopilot.

High-performance, low-noise IMUs on board are designed for stabilization applications.


Data-ready signals from all sensors are routed to separate interrupt and timer capture pins
on the autopilot, permitting precise time-stamping of sensor data. Newly designed vibra-
tion isolation enables more accurate readings, allowing vehicles to achieve better overall
flight performance.

The two external SPI buses and six associated chip select lines allow for additional sensors
and an SPI-interfaced payload. There are a total of four I2C buses: two dedicated for exter-
nal use and two grouped with serial ports for GPS/compass modules.

The Pixhawk 4 autopilot development kit is perfect for developers at corporate research
labs, startups, and for academics.

Pixhawk® 4 Technical Data Sheet (August 2018) Page 1 of 3


Technical Specifications Electrical Data
•• Main FMU Processor: STM32F765 Voltage Ratings:
-- 32 Bit Arm ® Cortex®-M7, 216MHz, 2MB •• Power module output: 4.9~5.5V
memory, 512KB RAM •• Max input voltage: 6V
•• IO Processor: STM32F100 •• Max current sensing: 120A
-- 32 Bit Arm ® Cortex®-M3, 24MHz, 8KB •• USB Power Input: 4.75~5.25V
SRAM •• Servo Rail Input: 0~36V
•• On-board sensors
-- Accel/Gyro: ICM-20689
-- Accel/Gyro: BMI055 Mechanical Data
-- Mag: IST8310 •• Dimensions: 44x84x12mm
-- Barometer: MS5611 •• Weight: 15.8g
•• GPS: ublox Neo-M8N GPS/GLONASS receiver;
integrated magnetometer IST8310
Environmental Data, Quality & Reliability

Interfaces •• Operating temp. ~40~85C


•• Storage temp. -40~85C
•• 8-16 PWM servo outputs (8 from IO, 8 from •• CE
FMU) •• FCC
•• 3 dedicated PWM/Capture inputs on FMU •• RoHS compliant (lead-free)
•• Dedicated R/C input for CPPM
•• Dedicated R/C input for Spektrum / DSM and
S.Bus
•• with analog / PWM RSSI input
•• Dedicated S.Bus servo output
•• 5 general purpose serial ports
-- 2 with full flow control
-- 1with separate 1.5A current limit
•• 3 I2C ports
•• 4 SPI buses
-- 1 internal high speed SPI sensor bus with 4
chip selects and 6 DRDYs
-- 1 internal low noise SPI bus dedicated for
-- Barometer with 2 chip selects, no DRDYs
-- 1 internal SPI bus dedicated for FRAM
-- Supports dedicated SPI calibration EEPROM-
located on sensor module
-- 1 external SPI buses
•• Up to 2 CANBuses for dual CAN with serial E
-- Each CANBus has individual silent controls
or ESC RX-MUX control
•• Analog inputs for voltage / current of 2 batteries
•• 2 additional analog inputs

Pixhawk® 4 Technical Data Sheet (August 2018) Page 2 of 3


Dimensions

Dimensions in millimeters

For more information visit:


www.dronecode.org
www.pixhawk.org

PX4 is a registered Trademark of the Dronecode Foundation. All rights reserved.


Pixhawk and its logo are registered trademarks of Lorenz Meier. All rights reserved.

Pixhawk® 4 Technical Data Sheet (August 2018) Page 3 of 3

You might also like