Scribd
Upload
3K views3 pages

Vaporesso Firmware Guidance (TPCBA Version) PDF

1. To update the firmware on a Vaporesso device, users must first download the correct firmware package from Vaporesso's website for their hardware version. 2. They then run the installer, connect their turned-off device to their PC while holding the fire button, and select "Rom Update" to choose and download the latest firmware. 3. The update process completes when the download percentage reaches 100%, at which point the user can unplug their device from the PC.

Uploaded by

Rajin Maahi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3K views3 pages

Vaporesso Firmware Guidance (TPCBA Version) PDF

1. To update the firmware on a Vaporesso device, users must first download the correct firmware package from Vaporesso's website for their hardware version. 2. They then run the installer, connect their turned-off device to their PC while holding the fire button, and select "Rom Update" to choose and download the latest firmware. 3. The update process completes when the download percentage reaches 100%, at which point the user can unplug their device from the PC.

Uploaded by

Rajin Maahi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Vaporesso Firmware Guidance (TPCBA Version)

Download:
1. Please download the firmware package from Vaporesso webpage.
http://www.vaporesso.com/download-manuals-for-vapes

Update and Customize: （e.g. Luxe Nano）


1. Please check your hardware version from the system settings in your devices. (SPCBA/TPCBA)
And then choose the firmware version to update and customize.
2. Run the installer file and install the firmware.
*Please do not change the default install folder, otherwise the installation could be failed.
3. Run the firmware and turn off your Vaporesso device before connection.

4. Keep battery inside, and hold down the fire button before plug it into the pc to get connected,
only release the fire button after the connection is successfully built.
*The name of your device will appear in Current Device list blank after connection.
5. Choose “Rom Update” and accordingly select the latest firmware update that you shall have
downloaded from the webpage. Suitable model and firmware version will be shown on screen.
6. Press the “Download” button to update the firmware. Wait until the updating percent reach
100%.

7. Finally, please just unplug the USB cable from PC.

FAQ:
1. Why can’t I connect my device to PC?
A. Please make sure your device is turned off and keep holding fire button before insert the cable.
B. Try to use a new USB cable to make sure it isn’t caused by a faulty cable.

2. Why can’t I update the firmware?


A. Please make sure the firmware version you choose is the correct one matches your device.
B. Try to use a new USB cable to make sure it isn’t caused by a faulty cable.

*If you have any further questions, please feel free to contact our customer service.

You might also like