Scribd
Upload
662 views

Structural Analysis

This document contains load definitions and analysis results for a structural model. Floor and seismic loads are defined for various levels. The analysis found no soft stories and provided eccentricity values and seismic forces for loads in the X and Z directions. Live and dead loads are also defined for multiple floors and areas.

Uploaded by

Azaina1
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
662 views

Structural Analysis

This document contains load definitions and analysis results for a structural model. Floor and seismic loads are defined for various levels. The analysis found no soft stories and provided eccentricity values and seismic forces for loads in the X and Z directions. Live and dead loads are also defined for multiple floors and areas.

Uploaded by

Azaina1
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 13

Tuesday, August 14, 2018, 12:34 PM

STAAD SPACE -- PAGE NO. 5

207. FLOOR LOAD


208. _3S12 FLOAD 3.66 GY
209. _4S1 FLOAD 3.66 GY
210. _4S2 FLOAD 3.66 GY
211. _4S3 FLOAD 3.66 GY
212. _4S4 FLOAD 3.66 GY
213. _4S5 FLOAD 3.66 GY
214. _4S6 FLOAD 3.66 GY
215. _4S7 FLOAD 3.66 GY
216. _4S8 FLOAD 3.66 GY
217. _4S9 FLOAD 3.66 GY
218. _4S10 FLOAD 3.66 GY
219. ONEWAY LOAD
220. _4S11 ONE 3.66 GY
221. FLOOR LOAD
222. _4S12 FLOAD 3.66 GY
223. MEMBER LOAD
224. 63 74 75 196 200 UNI GY 1.52
225. 58 59 62 116 201 UNI GY 8.9
226. 60 61 112 167 TO 170 206 UNI GY 8.14
227. 78 83 198 UNI GY 6.22
228. 67 69 70 76 117 128 129 131 135 136 185 189 190 202 203 208 UNI GY 0.76
229. 113 TO 115 UNI GY 16.28
230. END DEFINE REFERENCE LOADS
231. FLOOR DIAPHRAGM
232. DIA 1 TYPE RIG HEI 4 JOINT 32 TO 55
233. DIA 2 TYPE RIG HEI 8 JOINT 56 TO 79
234. DIA 3 TYPE RIG HEI 12 JOINT 80 TO 103
235. CHECK SOFT STORY ASCE7

*** NOTE: NEITHER "MASS" NOR "GRAVITY" REFERENCE LOADTYPE IS PRESENT.


MASS MODEL IS FORMED BY COMBINING ALL "DEAD" AND "LIVE" (IF ANY) REFERENCE LOADTYPES.

*** NOTE: MASS MODEL FORMED WILL BE USED IN SEISMIC/RESPONSE/TIME HISTORY LOADING, IF ANY.
IF MASS MODEL IS SEPARATELY PROVIDED IN INDIVIDUAL LOADING, THE GENERATED MASS
WILL BE REPLACED BY THE MASS PROVIDED IN INDIVIDUAL LOADING.

************************************************************************************

FLOOR DIAPHRAGM UNIT - KN METE


--------------- ----------------

NO. TYPE FL. LEVEL FL. WT CENTRE OF MASS MASTER JOINT NO.
X Z

1 RIGID 4.000 2164.93 10.064 5.863 110


2 RIGID 8.000 2214.89 10.247 5.546 111
3 RIGID 12.000 1829.71 10.339 5.830 112

************************************************************************************

C:\Users\Hp ProBook\Desktop\CMPM\STAAD\CMPM-FINALE-R0.anl Page 5 of 295


Tuesday, August 14, 2018, 12:34 PM
STAAD SPACE -- PAGE NO. 6

236. DEFINE UBC LOAD


237. ZONE 0.4 I 1.5 RWX 8.5 RWZ 8.5 STYP 4 CT 0.0731 NA 1 NV 1.2
238. REFERENCE LOAD Y

*** NOTE: SEISMIC WEIGHT TABLE IS PRESENT.THIS WEIGHT TABLE


WILL BE CONSIDERED IN STATIC SEISMIC ANALYSIS.

239. R1 1.0
240. LOAD 1 LOADTYPE SEISMIC TITLE EX
241. UBC LOAD X 1 DEC 1 ACC 0.05
242. PERFORM ANALYSIS

P R O B L E M S T A T I S T I C S
-----------------------------------

NUMBER OF JOINTS 100 NUMBER OF MEMBERS 171


NUMBER OF PLATES 0 NUMBER OF SOLIDS 0
NUMBER OF SURFACES 0 NUMBER OF SUPPORTS 19

SOLVER USED IS THE OUT-OF-CORE BASIC SOLVER

ORIGINAL/FINAL BAND-WIDTH= 65/ 17/ 268 DOF


TOTAL PRIMARY LOAD CASES = 1, TOTAL DEGREES OF FREEDOM = 270
TOTAL LOAD COMBINATION CASES = 0 SO FAR.
SIZE OF STIFFNESS MATRIX = 73 DOUBLE KILO-WORDS
REQRD/AVAIL. DISK SPACE = 13.0/ 5777.1 MB

VERTICAL STRUCTURAL IRREGULARITIES : SOFT STORY CHECK - ASCE/SEI 7-05


-------- ---------- --------------

STORY FL. LEVEL IN METE S T A T U S


----- ----------------- --------------------
X Z

1 4.00 OK OK
2 8.00 OK OK
3 12.00 OK OK

C:\Users\Hp ProBook\Desktop\CMPM\STAAD\CMPM-FINALE-R0.anl Page 6 of 295


Tuesday, August 14, 2018, 12:34 PM
STAAD SPACE -- PAGE NO. 7

NOTE : NO SOFT STOREY IS DETECTED.

***********************************************************
* *
* X DIRECTION : Ta = 0.471 Tb = 0.803 Tuser = 0.000 *
* T = 0.471, LOAD FACTOR = 1.000 *
* UBC TYPE = 97 *
* UBC FACTOR V = 0.1941 x 6426.88 = 1247.57 KN *
* *
***********************************************************

************************************************************************

***NOTE: SEISMIC LOAD IS ACTING AT CENTER OF MASS FOR RIGID DIAPHRAGM.


TORSION FROM STATIC ECCENTRICITY (esi) IS INCLUDED IN ANALYSIS.
DYNAMIC ECCENTRICITY APPLIED = DEC - 1

LOAD NO.: 1 DIRECTION : X UNIT - METE

STORY LEVEL DYN. ECC. (dec) ACC. ECC. (aec) DESIGN ECC.
----- ----- --------------- --------------- ---------------
X Z X Z X Z
dec + aec dec + aec

1 4.00 0.00 0.00 0.98 0.73 0.00 0.73


2 8.00 0.00 0.00 0.98 0.73 0.00 0.73
3 12.00 0.00 0.00 0.98 0.73 0.00 0.73

************************************************************************

243. CHANGE
244. LOAD 2 LOADTYPE SEISMIC TITLE EZ
245. UBC LOAD Z 1 DEC 1 ACC 0.05
246. PERFORM ANALYSIS

C:\Users\Hp ProBook\Desktop\CMPM\STAAD\CMPM-FINALE-R0.anl Page 7 of 295


Tuesday, August 14, 2018, 12:34 PM
STAAD SPACE -- PAGE NO. 8

VERTICAL STRUCTURAL IRREGULARITIES : SOFT STORY CHECK - ASCE/SEI 7-05


-------- ---------- --------------

STORY FL. LEVEL IN METE S T A T U S


----- ----------------- --------------------
X Z

1 4.00 OK OK
2 8.00 OK OK
3 12.00 OK OK

NOTE : NO SOFT STOREY IS DETECTED.

***********************************************************
* *
* Z DIRECTION : Ta = 0.471 Tb = 0.654 Tuser = 0.000 *
* T = 0.471, LOAD FACTOR = 1.000 *
* UBC TYPE = 97 *
* UBC FACTOR V = 0.1941 x 6426.88 = 1247.57 KN *
* *
***********************************************************

************************************************************************

***NOTE: SEISMIC LOAD IS ACTING AT CENTER OF MASS FOR RIGID DIAPHRAGM.


TORSION FROM STATIC ECCENTRICITY (esi) IS INCLUDED IN ANALYSIS.
DYNAMIC ECCENTRICITY APPLIED = DEC - 1

C:\Users\Hp ProBook\Desktop\CMPM\STAAD\CMPM-FINALE-R0.anl Page 8 of 295


Tuesday, August 14, 2018, 12:34 PM
STAAD SPACE -- PAGE NO. 9

LOAD NO.: 2 DIRECTION : Z UNIT - METE

STORY LEVEL DYN. ECC. (dec) ACC. ECC. (aec) DESIGN ECC.
----- ----- --------------- --------------- ---------------
X Z X Z X Z
dec + aec dec + aec

1 4.00 0.00 0.00 0.98 0.73 0.98 0.00


2 8.00 0.00 0.00 0.98 0.73 0.98 0.00
3 12.00 0.00 0.00 0.98 0.73 0.98 0.00

************************************************************************

247. CHANGE
248. LOAD 3 LOADTYPE DEAD TITLE DL
249. REFERENCE LOAD
250. R1 -1.0
251. LOAD 15 LOADTYPE LIVE REDUCIBLE TITLE LL CHECKERED 01
252. FLOOR LOAD
253. _2.C1.4.8 FLOAD -4.8 GY
**NOTE** about Floor/OneWay Loads/Weights.
Please note that depending on the shape of the floor you may
have to break up the FLOOR/ONEWAY LOAD into multiple commands.
For details please refer to Technical Reference Manual
Section 5.32.4.2 Note d and/or "5.32.4.3 Note f.

254. _3.C1.4.8 FLOAD -4.8 GY


255. _2.C1.3.8 FLOAD -3.8 GY
256. _3.C1.3.8 FLOAD -3.8 GY
257. _4.C1.3.8 FLOAD -3.8 GY
258. _4.C1.3.8.1 FLOAD -3.8 GY
259. ONEWAY LOAD
260. _2.C1.3.8-1 ONE -3.8 GY
261. _4.C1.3.8-1 ONE -3.8 GY
262. FLOOR LOAD
263. _3.C1.6 FLOAD -6 GY
264. LOAD 16 LOADTYPE LIVE REDUCIBLE TITLE LL CHECKERED 02
265. FLOOR LOAD
266. _2.C2.2.1 FLOAD -2.1 GY
267. _2.C2.4.8 FLOAD -4.8 GY
268. _3.C2.4.8 FLOAD -4.8 GY
269. _2.C2.3.8 FLOAD -3.8 GY
270. _3.C2.3.8 FLOAD -3.8 GY
271. _4.C2.3.8 FLOAD -3.8 GY
272. _4.C2.3.8.1 FLOAD -3.8 GY
273. ONEWAY LOAD
274. _3.C2.3.8-1 ONE -3.8 GY

C:\Users\Hp ProBook\Desktop\CMPM\STAAD\CMPM-FINALE-R0.anl Page 9 of 295


Tuesday, August 14, 2018, 12:34 PM
STAAD SPACE -- PAGE NO. 10

275. LOAD 4 LOADTYPE LIVE TITLE LL


276. FLOOR LOAD
277. _2S1 FLOAD -4.8 GY
278. _2S2 FLOAD -2.1 GY
279. _2S3 FLOAD -4.8 GY
280. _2S4 FLOAD -4.8 GY
281. _2S5 FLOAD -4.8 GY
282. _2S6 FLOAD -4.8 GY
283. _2S7 FLOAD -4.8 GY
284. _2S8 FLOAD -4.8 GY
285. _2S9 FLOAD -3.8 GY
286. _2S10 FLOAD -3.8 GY
287. ONEWAY LOAD
288. _2S11 ONE -3.8 GY
289. FLOOR LOAD
290. _2S12 FLOAD -4.8 GY
291. _3S1 FLOAD -4.8 GY
292. _3S2 FLOAD -4.8 GY
293. _3S3 FLOAD -4.8 GY
294. _3S4 FLOAD -6 GY
295. _3S5 FLOAD -4.8 GY
296. _3S6 FLOAD -4.8 GY
297. _3S7 FLOAD -4.8 GY
298. _3S8 FLOAD -3.8 GY
299. _3S9 FLOAD -3.8 GY
300. _3S10 FLOAD -3.8 GY
301. ONEWAY LOAD
302. _3S11 ONE -3.8 GY
303. FLOOR LOAD
304. _3S12 FLOAD -4.8 GY
305. _4S1 FLOAD -3.8 GY
306. _4S2 FLOAD -3.8 GY
307. _4S3 FLOAD -3.8 GY
308. _4S4 FLOAD -3.8 GY
309. _4S5 FLOAD -3.8 GY
310. _4S6 FLOAD -3.8 GY
311. _4S7 FLOAD -3.8 GY
312. _4S8 FLOAD -3.8 GY
313. _4S9 FLOAD -3.8 GY
314. _4S10 FLOAD -3.8 GY
315. ONEWAY LOAD

C:\Users\Hp ProBook\Desktop\CMPM\STAAD\CMPM-FINALE-R0.anl Page 10 of 295


Tuesday, August 14, 2018, 12:34 PM
STAAD SPACE -- PAGE NO. 11

316. _4S11 ONE -3.8 GY


317. FLOOR LOAD
318. _4S12 FLOAD -3.8 GY
319. LOAD COMB 5 1.4 DL
320. 3 1.4
321. LOAD COMB 6 1.2 DL + 1.6 LL
322. 3 1.2 4 1.6
323. LOAD COMB 7 1.2 DL + 1 EX + 0.5 LL
324. 1 1.0 3 1.2 4 0.5
325. LOAD COMB 8 1.2 DL + 1 EZ + 0.5 LL
326. 2 1.0 3 1.2 4 0.5
327. LOAD COMB 9 1.53 DL + 0.5 LL +1.25 EX
328. 3 1.53 4 0.5 1 1.25
329. LOAD COMB 10 1.53 DL + 0.5 LL + 1.25 EZ
330. 3 1.53 4 0.5 2 1.25
331. LOAD COMB 11 1.23 DL + 1.25 EX
332. 3 1.23 1 1.25
333. LOAD COMB 12 1.23 DL - 1.25 EX
334. 3 1.23 1 -1.25
335. LOAD COMB 13 1.23 DL + 1.25 EZ
336. 3 1.23 2 1.25
337. LOAD COMB 14 1.23 DL -1.25 EZ
338. 3 1.23 2 -1.25
339. LOAD COMB 17 1.2 DL + 1.6 LL CHECKERED 01
340. 3 1.2 15 1.6
341. LOAD COMB 18 1.2 DL + 1.6 LL CHECKERED 02
342. 3 1.2 16 1.6
343. LOAD COMB 19 1.2 DL + 1 EX + 0.5 LL CHECKERED 01
344. 1 1.2 3 1.0 15 0.5
345. LOAD COMB 20 1.2 DL + 1 EX + 0.5 LL CHECKERED 02
346. 1 1.2 3 1.0 16 0.5
347. LOAD COMB 21 1.2 DL + 1 EZ + 0.5 LL CHECKERED 01
348. 2 1.2 3 1.0 15 0.5
349. LOAD COMB 22 1.2 DL + 1 EZ + 0.5 LL CHECKERED 02
350. 2 1.2 3 1.0 16 0.5
351. LOAD COMB 23 1.53 DL + 0.5 LL CHECKERED 01 +1.25 EX
352. 1 1.53 3 0.5 15 1.25
353. LOAD COMB 24 1.53 DL + 0.5 LL CHECKERED 02 +1.25 EX
354. 1 1.53 3 0.5 16 1.25
355. LOAD COMB 25 1.53 DL + 0.5 LL CHECKERED 01 + 1.25 EZ
356. 2 1.53 3 0.5 15 1.25
357. LOAD COMB 26 1.53 DL + 0.5 LL CHECKERED 02 + 1.25 EZ
358. 2 1.53 3 0.5 16 1.25
359. PERFORM ANALYSIS

C:\Users\Hp ProBook\Desktop\CMPM\STAAD\CMPM-FINALE-R0.anl Page 11 of 295


Tuesday, August 14, 2018, 12:34 PM
STAAD SPACE -- PAGE NO. 12

VERTICAL STRUCTURAL IRREGULARITIES : SOFT STORY CHECK - ASCE/SEI 7-05


-------- ---------- --------------

STORY FL. LEVEL IN METE S T A T U S


----- ----------------- --------------------
X Z

1 4.00 OK OK
2 8.00 OK OK
3 12.00 OK OK

NOTE : NO SOFT STOREY IS DETECTED.

360. LOAD LIST 1 TO 16


361. PRINT STORY DRIFT 0.025000

C:\Users\Hp ProBook\Desktop\CMPM\STAAD\CMPM-FINALE-R0.anl Page 12 of 295


Tuesday, August 14, 2018, 12:34 PM
STAAD SPACE -- PAGE NO. 13

STORY HEIGHT LOAD AVG. DISP(CM ) DRIFT(CM ) RATIO STATUS


------------------------------------------------------------------------------------------
(METE) X Z X Z

BASE= 0.00 ALLOW. DRIFT = L / 40

1 0.00 1 0.0000 0.0000 0.0000 0.0000 L /999999 PASS


2 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
3 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
15 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
16 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
4 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
5 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
6 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
7 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
8 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
9 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
10 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
11 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
12 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
13 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
14 0.0000 0.0000 0.0000 0.0000 L /999999 PASS

2 4.00 1 1.4792 0.0063 1.4792 0.0063 L / 270 PASS

C:\Users\Hp ProBook\Desktop\CMPM\STAAD\CMPM-FINALE-R0.anl Page 13 of 295


Tuesday, August 14, 2018, 12:34 PM
STAAD SPACE -- PAGE NO. 14

2 -0.0080 0.8957 0.0080 0.8957 L / 446 PASS


3 -0.0015 0.0021 0.0015 0.0021 L /187792 PASS
15 0.0004 0.0009 0.0004 0.0009 L /999999 PASS
16 -0.0010 -0.0008 0.0010 0.0008 L /999999 PASS
4 -0.0006 0.0001 0.0006 0.0001 L /999999 PASS
5 -0.0022 0.0030 0.0022 0.0030 L /134137 PASS
6 -0.0028 0.0026 0.0028 0.0026 L /143908 PASS
7 1.4771 0.0089 1.4771 0.0089 L / 271 PASS
8 -0.0102 0.8983 0.0102 0.8983 L / 445 PASS
9 1.8464 0.0111 1.8464 0.0111 L / 216 PASS
10 -0.0127 1.1229 0.0127 1.1229 L / 356 PASS
11 1.8471 0.0105 1.8471 0.0105 L / 216 PASS
12 -1.8509 -0.0052 1.8509 0.0052 L / 216 PASS
13 -0.0120 1.1222 0.0120 1.1222 L / 356 PASS
14 0.0082 -1.1170 0.0082 1.1170 L / 358 PASS

3 8.00 1 3.4949 0.0231 2.0156 0.0169 L / 198 PASS


2 -0.0205 2.2707 0.0125 1.3751 L / 291 PASS
3 -0.0037 0.0035 0.0022 0.0014 L /182330 PASS
15 0.0001 0.0018 0.0003 0.0009 L /999999 PASS
16 -0.0012 -0.0016 0.0002 0.0008 L /999999 PASS
4 -0.0011 0.0002 0.0005 0.0002 L /999999 PASS
5 -0.0052 0.0049 0.0031 0.0020 L /130235 PASS
6 -0.0062 0.0046 0.0035 0.0019 L /115339 PASS
7 3.4898 0.0275 2.0127 0.0186 L / 199 PASS
8 -0.0256 2.2751 0.0154 1.3768 L / 290 PASS
9 4.3623 0.0344 2.5159 0.0233 L / 159 PASS
10 -0.0319 2.8439 0.0192 1.7211 L / 232 PASS
11 4.3640 0.0333 2.5168 0.0228 L / 159 PASS

C:\Users\Hp ProBook\Desktop\CMPM\STAAD\CMPM-FINALE-R0.anl Page 14 of 295


Tuesday, August 14, 2018, 12:34 PM
STAAD SPACE -- PAGE NO. 15

STORY HEIGHT LOAD AVG. DISP(CM ) DRIFT(CM ) RATIO STATUS


------------------------------------------------------------------------------------------
(METE) X Z X Z

BASE= 0.00 ALLOW. DRIFT = L / 40

12 -4.3732 -0.0246 2.5222 0.0194 L / 158 PASS


13 -0.0303 2.8428 0.0183 1.7206 L / 232 PASS
14 0.0211 -2.8341 0.0129 1.7171 L / 233 PASS

4 12.00 1 4.7971 0.0394 1.3023 0.0163 L / 307 PASS


2 -0.0228 3.2906 0.0023 1.0199 L / 392 PASS
3 -0.0078 0.0082 0.0041 0.0047 L / 85628 PASS
15 0.0004 0.0035 0.0003 0.0017 L /230651 PASS
16 -0.0026 -0.0003 0.0014 0.0012 L /292827 PASS
4 -0.0022 0.0032 0.0011 0.0029 L /135712 PASS
5 -0.0109 0.0115 0.0057 0.0065 L / 61163 PASS
6 -0.0128 0.0149 0.0066 0.0103 L / 38754 PASS
7 4.7867 0.0508 1.2968 0.0233 L / 308 PASS
8 -0.0332 3.3020 0.0077 1.0269 L / 389 PASS
9 5.9834 0.0634 1.6211 0.0289 L / 247 PASS
10 -0.0415 4.1274 0.0096 1.2834 L / 311 PASS
11 5.9868 0.0593 1.6228 0.0261 L / 246 PASS
12 -6.0060 -0.0392 1.6328 0.0146 L / 245 PASS
13 -0.0381 4.1233 0.0078 1.2806 L / 312 PASS

C:\Users\Hp ProBook\Desktop\CMPM\STAAD\CMPM-FINALE-R0.anl Page 15 of 295


Tuesday, August 14, 2018, 12:34 PM
STAAD SPACE -- PAGE NO. 16

14 0.0189 -4.1032 0.0022 1.2691 L / 315 PASS


362. PRINT DIA CR

************************************************************

CENTRE OF RIGIDITY UNIT - METE


------------------ -----------

DIAPHRAM FL. LEVEL X-COORDINATE Z-COORDINATE

1 4.000 9.675 7.618


2 8.000 9.633 7.693
3 12.000 9.591 7.735

************************************************************

363. START CONCRETE DESIGN


364. CODE ACI
365. FC 28000 ALL
366. FYMAIN 420000 ALL
367. MAXMAIN 32 ALL
368. MINMAIN 10 ALL
369. TRACK 2 ALL
370. DESIGN BEAM 58 TO 71 73 TO 79 81 TO 87 112 TO 125 127 TO 133 135 TO 141 166 -
371. 167 TO 179 181 TO 187 189 TO 225

C:\Users\Hp ProBook\Desktop\CMPM\STAAD\CMPM-FINALE-R0.anl Page 16 of 295


Tuesday, August 14, 2018, 12:34 PM
STAAD SPACE -- PAGE NO. 17

ACI 318-11 BEAM NO. 58 DESIGN RESULTS


=============================================

LEN - 4650. MM FY - 420. FC - 28. MPA, SIZE - 350. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 63. 2 - 25MM 0. 4650. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 149.25 KN-MET AT 0.MM, LOAD 11|
| REQD STEEL= 957.MM2, RHO=0.0063, RHOMX=0.0212 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 248./ 50./ 223. MMS |
| REQD. DEVELOPMENT LENGTH = 717. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 98770.5 cm^4

2 439. 5 - 20MM 0. 4650. YES YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 227.06 KN-MET AT 4650.MM, LOAD 9|
| REQD STEEL= 1496.MM2, RHO=0.0097, RHOMX=0.0212 RHOMN=0.0033 |
| MAX/MIN/ACTUAL BAR SPACING= 248./ 45./ 57. MMS |
| REQD. DEVELOPMENT LENGTH = 1004. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 144101.2 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 961./ 1440. 149./ 217. 11/ 12


388. 877./ 1111. 137./ 171. 11/ 12
775. 775./ 813. 122./ 127. 11/ 12
1162. 676./ 546. 107./ 87. 9/ 12
1550. 559./ 306. 89./ 49. 9/ 12
1938. 413./ 95. 66./ 16. 9/ 12
2325. 238./ 4. 39./ 1. 9/ 16
2712. 257./ 108. 42./ 18. 12/ 1
3100. 404./ 253. 65./ 41. 12/ 1
3487. 531./ 479. 85./ 77. 12/ 11
3875. 640./ 775. 101./ 122. 12/ 9
4262. 730./ 1123. 115./ 173. 12/ 9
4650. 804./ 1514. 126./ 227. 12/ 9

C:\Users\Hp ProBook\Desktop\CMPM\STAAD\CMPM-FINALE-R0.anl Page 17 of 295

You might also like