dqa1730-0AAA01.

fm Page 1 Friday, March 22, 2002 3:56 PM

SUPERSTACK® 3 SWITCH 4200 SERIES

MANAGEMENT QUICK REFERENCE GUIDE

Summary of Software Features

This table summarizes the software features that are supported by the Switch 4200.
Feature Switch 4200
Automatic IP Configuration Supported
Aggregated Links Supported on 10/100/1000BASE-T ports only
Broadcast Storm Control Supported
Virtual LANs (VLANs) Support for up to 60 VLANs using the IEEE 802.1Q
standard
Multicast Filtering 128 Multicast filter groups supported
Spanning Tree Protocol (802.1D-1998) Supported
Rapid Spanning Tree Protocol (802.1w) Supported
Quality of Service (QoS) Support for two 802.1p priority queues per port
RMON Four groups supported: Statistics, History, Alarms, Events
Email Notification of Events Supported
Management Web interface, command line interface, and SNMP
supported
Port Security Disconnect Unauthorized Device (DUD) supported

For information about managing the software features of the Switch, refer to the “SuperStack 3
Switch Management Interface Reference Guide” on the CD-ROM that accompanies the Switch.

1
dqa1730-0AAA01.fm Page 2 Friday, March 22, 2002 3:56 PM

Web Interface Map – Device View

Console Folder
Setup

Control Folder
Initialize
Reboot Alert Folder
Software Upgrade Create
Modify
Management Folder Test
Setup Delete
Alert Summary
Monitor
Monitor Folder
System Folder Telnet Folder
Modify
Getting Started Connect
Summary
Console
Control Unit Folder
Management Name
Telnet Notepad
Unit

Address Database Folder

Add
Aging Time
Find
Remove
Summary

Broadcast Storm Control Folder

Setup
Top-level Device View
Link Aggregation Folder
System
Bridge Folder Modify Modify Folder
Bridge
Physical Interface Address Database Summary Add Port
Protocol Broadcast Storm Control Admin State
Security Link Aggregation Multicast Filter Folder Remove Port
Multicast Filter IGMP
Spanning Tree IGMP Folder
Spanning Tree Folder SnoopMode
Setup
Physical Interface Folder
Ethernet Folder
Ethernet
History History Folder
Setup History-1 Hour
Smart Autosensing History-48 Hours
Statistics
Summary
Protocol Folder
IP IP Folder
Setup
Security Folder
Device Folder User Folder
Device
User Modify
Network
Network Folder Access Folder
Access Port Security

For detailed descriptions of the web interface operations and the command line interface (CLI)
commands that you require to manage the Switch please refer to the Management Interface
Reference Guide supplied in HTML format on the CD-ROM that accompanies your Switch.
dqa1730-0AAA01.fm Page 3 Friday, March 22, 2002 3:56 PM

Web Interface Device Mimic

Name
Notepad
History-1 Hour
Setup History-48 Hours
Statistics Summary
Setup Setup
Port Security
Unit

A Quick Guide to the Web Interface Operations

This table describes the operations that are available in the Web Interface.
Operation What does the Operation do?
System Getting Started Guides you through the initial configuration of the unit.
System Console Setup Configures the type, speed and flow of a console port.
System Control Initialize Initailizes the unit to factory default settings.
System Control Reboot Resets the unit.
System Control Software Upgrade Upgrades the software on the unit.
System Management Setup Changes information for the unit.
System Management Alert Create Creates and defines an email alert and its distribution.
System Management Alert Modify Modifies an existing email alert and its distribution.
System Management Alert Test Sends a test email alert.
System Management Alert Delete Deletes an existing email alert.
System Management Alert Summary Displays summary information for configured email alerts.
System Management Monitor Modify Sets up a device or port to be monitored for email alerts.
System Management Monitor Summary Displays summary information for devices or ports on which
monitoring is enabled.
System Telnet Connect Starts a Telnet session to the unit in a separate window.
System Unit Name Assigns a name to the unit.

3
dqa1730-0AAA01.fm Page 4 Friday, March 22, 2002 3:56 PM

Operation (Continued) What does the Operation do?

System Unit Notepad Opens a notepad for the unit.
Bridge Address Database Add Adds an address to the database.
Bridge Address Database Aging Time Configures the aging period for the address database.
Bridge Address Database Find Displays the location of a MAC address.
Bridge Address Database Remove Deletes an address from the database.
Bridge Address Database Summary Views all addresses that are stored against a particular port or
aggregated link.
Bridge Broadcast Storm Control Setup Configures Broadcast Storm Control parameters for the unit.
Bridge Link Aggregation Modify AddPort Adds a port to an aggregated link.
Bridge Link Aggregation Modify Admin State Changes the state of an aggregated link.
Bridge Link Aggregation Modify RemovePort Deletes a port from an aggregated link.
Bridge Link Aggregation Summary Lists all of the aggregated links.
Bridge Multicast Filter IGMP SnoopMode Configures IGMP multicast learning for the unit.
Bridge Spanning Tree Setup Configures spanning tree parameters.
Physical Interface Ethernet History History-1 Hour Displays packet activity for all ports on a unit over the previous hour.
Physical Interface Ethernet History History-48 Hours Displays packet activity for all ports on a unit over the previous 48
hours.
Physical Interface Ethernet Setup Sets up single or multiple ethernet ports.
Physical Interface Ethernet Smart Autosensing Configures smart autosensing for the unit.
Physical Interface Ethernet Statistics Displays statistics for packet and error traffic on one or more ports.
Physical Interface Ethernet Summary Displays summary information for the unit.
Protocol IP Setup Configures the IP information for the unit.
Security Device User Modify Modifies the password of the current user.
Security Network Access Port Security Sets the security mode of single or multiple ports on a unit.
dqa1730-0AAA01.fm Page 5 Friday, March 22, 2002 3:56 PM

Command Line Interface Map

■ To display sub-menus:
At the Select menu option prompt, enter the name of the menu or menus.
■ To display parent menus:
At the Select menu option prompt, enter quit.
■ To display the Top-level menu:
Press the [Esc] key.
■ To obtain help:
At the Select menu option prompt, enter ?.
Address Database Menu
add
agingTime
find
remove
summary

Link Aggregation Menu Modify Menu

detail addPort
modify linkState
summary removePort

Multicast Filter Menu IGMP Menu

igmp queryMode
routerPort snoopMode
Port Menu
RouterPort Menu
defaultPriority
detail addPort
Bridge Menu autoDiscovery
stpCost
addressDatabase stpFastStart removePort
broadcastStormControl summary summary
linkAggregation
multicastFilter
port Spanning Tree Menu
spanningTree stpDefaultPathCosts
summary stpForwardDelay
vlan stpHelloTime
stpMaxAge
Top-level Menu stpPriority
bridge stpState
logout stpVersion
physicalInterface VLAN Menu Modify Menu
protocol
create addPort
security
delete name
system
Physical Interface Menu detail removePort
trafficManagement
modify
ethernet summary

Ethernet Menu
autoNegotiation
detail
flowControl
portCapabilities
portMode
portState
smartAutosense
summary

5
dqa1730-0AAA01.fm Page 6 Friday, March 22, 2002 3:56 PM

Protocol Menu IP Menu Interface Menu

ip basicConfig modify
initializeConfig summary
interface
ping
Route Menu
route
default
noDefault
Device Menu summary
Security Menu access
user Access Menu
device modify
network summary
Network Menu
Top-level Menu access User Menu
bridge create
feature Control Menu delete
logout modify
physicalInterface initialize
reboot pwdRecover
protocol summary
security softwareUpgrade
system System Menu Access Menu
trafficManagement control Management Menu portSecurity
inventory alert
management contact Alert Menu
summary location addAddress
monitor create
name delete
password modify
remoteAccess removeAddress
snmp summary
test

Monitor Menu
Traffic Management Menu modify
qos summary

SNMP Menu
community
get
next
set
QOS Menu trap
classifier Trap Menu
profile create
serviceLevel delete
trafficQueue modify
summary
Classifier Menu
create
delete
detail
modify
summary

Profile Menu
addClassifier
assign
create
delete
detail
listPorts
modify
removeClassifier
summary

Service Level Menu

summary

Traffic Queue Menu

summary

For detailed descriptions of the web interface operations and the command line interface (CLI)
commands that you require to manage the Switch please refer to the Management Interface
Reference Guide supplied in HTML format on the CD-ROM that accompanies your Switch.
dqa1730-0AAA01.fm Page 7 Friday, March 22, 2002 3:56 PM

A Quick Guide to the Command Line Interface Commands

This table describes the commands that are available in the Command Line Interface.
Command What does the Command do?
bridge addressDatabase add Adds a statically configured address.
bridge addressDatabase agingTime Sets the bridge address aging time.
bridge addressDatabase find Finds an address.
bridge addressDatabase remove Removes an address.
bridge addressDatabase summary Displays summary information on addresses.
bridge broadcastStormControl Enables or disables broadcast storm control.
bridge linkAggregation detail Displays detailed information on an aggregated link.
bridge linkAggregation modify addPort Adds a port to an aggregated link.
bridge linkAggregation modify linkState Enables or disables an aggregated link.
bridge linkAggregation modify removePort Removes a port from an aggregated link.
bridge linkAggregation summary Displays summary information on an aggregated link.
bridge multicastFilter igmp queryMode Enables or disables IGMP query mode.
bridge multicastFilter igmp snoopMode Enables or disables IGMP Multicast learning.
bridge multicastFilter routerPort addPort Adds a statically configured router port.
bridge multicastFilter routerPort autoDiscovery Enables or disables router port auto discovery.
bridge multicastFilter routerPort removePort Removes a router port.
bridge multicastFilter routerPort summary Displays summary information on a router port.
bridge port defaultPriority Sets the default 802.1D priority for untagged frames.
bridge port detail Displays detailed information on a port.
bridge port stpCost Sets the Spanning Tree path cost parameter.
bridge port stpFastStart Enables or disables Spanning Tree fast start.
bridge port summary Displays summary information on a port.
bridge spanningTree stpDefaultPathCosts Sets the bridge Spanning Tree default path costs
bridge spanningTree stpForwardDelay Sets the bridge Spanning Tree forward delay parameter.
bridge spanningTree stpHelloTime Sets the bridge Spanning Tree hello time parameter.
bridge spanningTree stpMaxAge Sets the bridge Spanning Tree maximum age parameter.
bridge spanningTree stpPriority Sets the bridge Spanning Tree priority parameter.
bridge spanningTree stpState Enables or disables Spanning Tree on a bridge.
bridge spanningTree stpVersion Selects the version of Spanning Tree to run on the bridge
bridge vlan create Creates a VLAN.
bridge vlan delete Deletes a VLAN.
bridge vlan detail Displays detailed information on a VLAN.
bridge vlan modify addPort Adds a port to a VLAN.
bridge vlan modify name Names a VLAN.
bridge vlan modify removePort Removes a port from a VLAN.
bridge vlan summary Displays summary information on a VLAN.

7
dqa1730-0AAA01.fm Page 8 Friday, March 22, 2002 3:56 PM

8
Command (Continued) What does the Command do?
physicalInterface ethernet autoNegotiation Enables or disables auto-negotiation.
physicalInterface ethernet detail Displays detailed information on an Ethernet port.
physicalInterface ethernet flowControl Enables or disables flow control.
physicalInterface ethernet portCapabilities Sets the port capabilities.
physicalInterface ethernet portMode Sets the port speed and duplex mode.
physicalInterface ethernet portState Enables or disables an Ethernet port.
physicalInterface ethernet smartAutosense Enables or disables smart autosensing.
physicalInterface ethernet summary Displays summary information on an Ethernet port.
protocol ip basicConfig Performs basic IP management configuration.
protocol ip initializeConfig Resets IP information to factory defaults.
protocol ip interface modify Modifies IP interface information.
protocol ip interface summary Displays summary information on the IP interface.
protocol ip ping Polls remote devices.
protocol ip route default Defines the default route.
protocol ip route noDefault Removes the default route.
protocol ip route summary Displays summary information on the default route.
security device access modify Modifies access rights.
security device access summary Displays summary information on access rights.
security device user create Creates a user.
security device user delete Deletes a user.
security device user modify Modifies a user.
security device user pwdRecover Enables or disables password recovery.
security device user summary Displays summary information on users.
security network access portSecurity Enables or disables DUD and NTK.
system control initialize Resets to factory defaults.
system control reboot Performs a system reboot.
system control softwareUpgrade Performs an agent software upgrade.
system inventory Displays unit information.
system management alert addAddress Adds an email address to an alert.
system management alert create Creates an alert.
system management alert delete Deletes an alert.
system management alert modify Modifies an existing alert.
system management alert removeAddress Removes an email address from an alert.
system management alert summary Displays summary information for the alert settings.
system management alert test Generates a test alert.
system management contact Sets the system contact.
system management location Sets the system location.
system management monitor modify Modifies a monitored item.
system management monitor summary Displays summary information for monitored items.
dqa1730-0AAA01.fm Page 9 Friday, March 22, 2002 3:56 PM

Command (Continued) What does the Command do?

system management name Sets the system name.
system management password Sets the system password.
system management remoteAccess Changes remote access permissions.
system management snmp community Sets the SNMP community string.
system management snmp get Gets SNMP objects.
system management snmp next Gets the next SNMP objects.
system management snmp set Sets SNMP objects.
system management snmp trap create Creates a trap destination.
system management snmp trap delete Deletes a trap destination.
system management snmp trap modify Modifies a trap destination
system management snmp trap summary Displays summary information on a trap destination.
trafficManagement qos classifier create Creates a classifier.
trafficManagement qos classifier delete Deletes a classifier.
trafficManagement qos classifier detail Displays detailed classifier information.
trafficManagement qos classifier modify Modifies a classifier.
trafficManagement qos classifier summary Displays summary information on classifiers.
trafficManagement qos profile addClassifier Adds a classifier to a QoS profile.
trafficManagement qos profile assign Assigns QoS profiles to ports.
trafficManagement qos profile create Creates a QoS profile.
trafficManagement qos profile delete Deletes a QoS profile.
trafficManagement qos profile detail Displays detailed information about a QoS profile.
trafficManagement qos profile listPorts Lists all ports with their associated QoS profiles.
trafficManagement qos profile modify Modifies a QoS profile.
trafficManagement qos profile removeClassifier Removes a classifier from a QoS profile.
trafficManagement qos profile summary Displays a summary of QoS profiles.
trafficManagement qos serviceLevel summary Displays summary information on service levels.
trafficManagement qos trafficQueue summary Displays summary information on traffic queues.

9
dqa1730-0AAA01.fm Page 10 Friday, March 22, 2002 3:56 PM

10
dqa1730-0AAA01.fm Page 11 Friday, March 22, 2002 3:56 PM

11
dqa1730-0AAA01.fm Page 12 Friday, March 22, 2002 3:56 PM

12

Part Number: DQA1730-0AAA01

Published: March 2002