SMDA05-6R2

Unidirectional TVS Array for

High-Speed Data Line
Protection
The SMDA05–6R2 transient voltage suppressor is designed to
protect equipment attached to up to six high speed communication
http://onsemi.com
lines from ESD, EFT, and lighting.
Features:
• SO–8 Package SO–8
• Peak Power – 400 Watts 8 x 20
S VOLTAGE SUPPRESSOR
• ESD Rating: 300 WATTS PEAK POWER
IEC 61000–4–2 (ESD) 15 kV (air) 8 kV (contact) 6 VOLTS
IEC 61000–4–4 (EFT) 40 A (5/50 ns)
IEC 61000–4–5 (lighting) 12 (8/20
s)
• UL Flammability Rating of 94 V–0 PIN CONFIGURATION
AND SCHEMATIC
Typical Applications:
• High Speed Communication Line Protection 1 8
• 5.0 V Data and I/O Lines PINS 1–5: CATHODE 2 7
• Microprocessor Based Equipment
PINS 6–7: ANODE
PIN 8: CATHODE
3 6
• LAN/WAN Equipment 4 5
• Servers
• Notebook and Desktop PC
• Instrumentation
• Peripherals
8

MAXIMUM RATINGS 1
Rating Symbol Value Unit SO–8
Peak Power Dissipation Ppk 400 W CASE 751
8 x 20
s @ TA = 25°C (Note 1) PLASTIC

Peak Pulse Current IPP 17 A

8 x 20
s @ TA = 25°C (Note 1) MARKING DIAGRAM

Junction and Storage TJ, Tstg –55 to °C

Temperature Range +150
SMDA5
Lead Solder Temperature – TL 260 °C LYWW
Maximum 10 Seconds Duration
1. Non–repetitive current pulse 8 x 20
S exponential decay waveform

SMDA5 = Device Code

L = Location Code
Y = Year
WW = Work Week

ORDERING INFORMATION
Device Package Shipping

SMDA05–6R2 SO–8 2500 Tape & Reel

 Semiconductor Components Industries, LLC, 2002 1 Publication Order Number:

August, 2002 – Rev. 1 SMDA05–6R2/D
 SMDA05–6R2

ELECTRICAL CHARACTERISTICS
Characteristic Symbol Min Typ Max Unit
Reverse Breakdown Voltage @ It = 1.0 mA VBR 6.0 – – V
Reverse Leakage Current @ VRWM = 5.0 Volts IR N/A – 20
A
Maximum Clamping Voltage @ IPP = 1.0 A, 8 x 20
S VC N/A – 9.8 V
Maximum Clamping Voltage @ IPP = 5.0 A, 8 x 20
S VC N/A – 11 V
Maximum Peak Pulse Current IPP – – 17 A

1000 100
tr PEAK VALUE IRSM @ 8
s
Ppk, PEAK SURGE POWER (WATTS)

90

% OF PEAK PULSE CURRENT

80 PULSE WIDTH (tP) IS DEFINED
AS THAT POINT WHERE THE
100 70 PEAK CURRENT DECAY = 8
s
60
HALF VALUE IRSM/2 @ 20
s
50
40
10
30
tP
NOTE: Non–Repetitive Surge. 20
10
1 0
1 10 100 1000 0 20 40 60 80
t, TIME (
s) t, TIME (
s)
Figure 1. Pulse Width Figure 2. 8 × 20
s Pulse Waveform

http://onsemi.com
2
 SMDA05–6R2

PACKAGE DIMENSIONS

SO–8
CASE 751–07
ISSUE AA
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
–X– Y14.5M, 1982.
A 2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A AND B DO NOT INCLUDE MOLD
PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER
8 5 SIDE.
5. DIMENSION D DOES NOT INCLUDE DAMBAR
B S 0.25 (0.010) M Y M PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN
1 EXCESS OF THE D DIMENSION AT MAXIMUM
4 MATERIAL CONDITION.
–Y– K 6. 751-01 THRU 751-06 ARE OBSOLETE. NEW
STANDAARD IS 751-07

G MILLIMETERS INCHES
DIM MIN MAX MIN MAX
C N X 45
A 4.80 5.00 0.189 0.197
B 3.80 4.00 0.150 0.157
SEATING
PLANE C 1.35 1.75 0.053 0.069
–Z– D 0.33 0.51 0.013 0.020
G 1.27 BSC 0.050 BSC
0.10 (0.004) H 0.10 0.25 0.004 0.010
H M J J 0.19 0.25 0.007 0.010
D K 0.40 1.27 0.016 0.050
M 0
8
0
8

N 0.25 0.50 0.010 0.020
0.25 (0.010) M Z Y S X S
S 5.80 6.20 0.228 0.244

http://onsemi.com
3
 SMDA05–6R2

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make
changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all
liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death
may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.

PUBLICATION ORDERING INFORMATION

Literature Fulfillment: JAPAN: ON Semiconductor, Japan Customer Focus Center
Literature Distribution Center for ON Semiconductor 2–9–1 Kamimeguro, Meguro–ku, Tokyo, Japan 153–0051
P.O. Box 5163, Denver, Colorado 80217 USA Phone: 81–3–5773–3850
Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada Email: [email protected]
Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada
ON Semiconductor Website: http://onsemi.com
Email: [email protected]
For additional information, please contact your local
N. American Technical Support: 800–282–9855 Toll Free USA/Canada
Sales Representative.

http://onsemi.com SMDA05–6R2/D
4