Answers

?
Activity 4/5.1 How Can You Identify Organic Macromolecules?
Refer to the figure (Some Simple Chemistry) on the next page when doing this activity.
Part A. Answer the questions. Then use your answers to develop simple rules for
identifying carbohydrates, lipids, proteins, and nucleic acids.
1. What is the approximate C:H:O ratio in each of the following types of
macromolecules?
Carbohydrates Lipids Proteins Nucleic acids
There is no reliable There is no reliable
1:2:1 1:2:very few C:H:O ratio for C:H:O ratio for
proteins. nucleic acids.

2. Which of the compounds listed in question 1 can often be composed of C, H, and O alone?
Carbohydrates and lipids can often be composed of C, H, and O alone.
3. Which of the compounds can be identified by looking at the C:H:O ratios alone?
Only carbohydrates and some lipids can be identified using C:H:O ratios alone.
4. What other elements are commonly associated with each of these four types of
macromolecules?
carbohydrates lipids proteins nucleic acids
Always contain P No No (except for No Yes
phospholipids)
Generally contain Yes Yes (except for Yes No
no P* phospholipids)
Always contain N No No Yes Yes

Generally contain Yes Yes No No

no N
Frequently contain No No Yes No
S
Generally contain Yes Yes No Yes
no S

* Note: It is possible to find some exceptions in each of these categories where “Yes” is
the answer to “Generally contain no ___”. For example, in reaction sequences many
compounds undergo phosphorylation. However, if the natural state of the compound does
not contain P (for example) the answer to “Generally contain no P” would be yes.

Copyright © Pearson Education, Inc., publishing as Benjamin Cummings

1
 Some Simple Chemistry
Basic
Compound components Reaction Product

Carbohydrates: CH2OH CH2OH CH2OH CH2OH CH2OH

Sugars, starches, H C O H C O H H C O O H H O
C H
H HO C C C C C
glycogen, O
HO C C OH C C OH HO C C
cellulose HO H H2 O + 1 H2 O
6C hexose dehydration Disaccharide
reaction

Lipids: H O H
C (CH2 )n CH3 O
Fats, oils, H C OH HO H C O C (CH2 )n CH3

waxes, O
C (CH2 )n CH3 O
cholesterol H C OH HO H C O C (CH2 )n CH3

O
C (CH2 )n CH3 O
H C OH HO H C O C (CH2 )n CH3
H 3 H2 O H + 3 H2 O

Glycerol + 3 fatty acids Triglyceride or fat

dehydration
reaction

Proteins: H H O H R O H OH R O
H2N C COOH H2N C C N C C H2N C C N C C
Enzymes, OH H OH OH
R R H R H
structural amino
group
carboxyl
group
peptide
bond + 1 H2 O
H2 O
proteins Amino acid dehydration Dipeptide
reaction

Nucleic acids: 5
HOCH2 O OH
B B B
DNA, 4C
H H
C 1
Base (etc.)
PO4 + H H + S S S
RNA 3C C2
(Base = A, U, G, or C) P P P P
RNA
OH OH
Ribose
P P P P (etc.)
S S S
5
HOCH2 O OH B B B
hydrogen
4C C 1 bonds
+ + Base
PO4 H H B B B
H H (Base = A, T, G, or C)
(etc.)
3C C2 S S S
P P P P
OH H DNA
Deoxyribose

Copyright © Pearson Education, Inc., publishing as Benjamin Cummings

2
5. Functional groups can modify the properties of organic molecules. In the table below,
indicate whether each functional group is polar or nonpolar and hydrophobic or
hydrophilic. Which of these functional groups are found in proteins and lipids?

Functional Polar or Hydrophobic Found in Found in many Found in many

group Nonpolar? or Hydrophilic all proteins proteins lipids
—OH Polar Hydrophilic No In some R In fatty acids as
groups terminal reactive
group
—CH2 Nonpolar Hydrophobic No Yes in side Yes
groups
—COOH Polar Hydrophilic Yes No
—NH2 Polar Hydrophilic Yes No
—SH Polar Hydrophilic No Found in No
cysteine
—PO4 Polar Hydrophilic No Only if they In phospholipids
have been
phosphorylated

6. You want to use a radioactive tracer that will label only the protein in an RNA virus.
Assume the virus is composed of only a protein coat and an RNA core. Which of the
following would you use? Be sure to explain your answer.
a. Radioactive P b. Radioactive N c. Radioactive S d. Radioactive C
To distinguish between protein and RNA in a virus, you could use radioactively labeled P
compounds. If you grew viruses on cells with radioactively labeled P compounds, the
phosphate groups in the virus’s RNA would become labeled but the protein would not
become labeled.
7. Closely related macromolecules often have many characteristics in common. For
example, they share many of the same chemical elements and functional groups.
Therefore, to separate or distinguish closely related macromolecules, you need to
determine how they differ and then target or label that difference.
a. What makes RNA different from DNA?
RNA contains ribose sugar, whereas DNA contains deoxyribose sugar. In addition, RNA
contains uracil and not thymine. DNA contains thymine but not uracil.
b. If you wanted to use a radioactive or fluorescent tag to label only the RNA in a cell
and not the DNA, what compound(s) could you label that is/are specific for RNA?
You could label either ribose or uracil.
c. If you wanted to label only the DNA, what compound(s) could you label?
You could label either deoxyribose or thymine.

Copyright © Pearson Education, Inc., publishing as Benjamin Cummings

3
8. Based on your answers to questions 1–7, what simple rule(s) can you use to identify
the following macromolecules?

carbohydrates Look for a 1:2:1 C:H:O ratio.

Many carbohydrates will contain no P, N, or S.
lipids Look for a 1:2 ratio of C:H and only very small amounts of O.
Most will contain no S. Phospholipids can contain P and N (as
part of the choline group; see Figure 5.13 in Biology, 7th edition).
proteins Look for amino and carboxyl groups. Some contain S. All
proteins can be identified by the presence of peptide bonds. (See
Figure 5.18 for the structure of a peptide bond.)
nucleic acids Look for nucleotides made up of a five-carbon sugar, a phosphate
group, and a nitrogenous base.
DNA vs RNA DNA contains phosphate, deoxyribose sugar, and adenine,
guanine, cytosine, and thymine.
RNA contains phosphate, ribose sugar, and adenine, guanine,
cytosine, and uracil.

Part B. Carbohydrate, lipid, protein, or nucleic acid? Name that structure!

Based on the rules you developed in Part A, identify the compounds below (and on the
following page) as carbohydrates, lipids, amino acids, polypeptides, or nucleic acids. In
addition, indicate whether each is likely to be polar or nonpolar, hydrophilic or
hydrophobic.
H H
1) fat or triglyceride
H O C H C17H35COO C H
1) C17H35COOH +
H O C H C17H35COO C H
H O C H C17H35COO C H

2) amino acid
H
2) HC C CH2C COOH
NH2
H+ N N
C 3) There is an error in the
H H
structure as drawn. The third
carbon in the chain (counting
OH from the left) and its associated
O O CHCH2 CH3 O CH2 H
CH3 group should be deleted.
When these are deleted, the
3) C C N C C N C C C N
structure becomes a tripeptide
HO H2 H H H made up of 3 amino acids.

Copyright © Pearson Education, Inc., publishing as Benjamin Cummings

4
Part B. Continued
CH2OH
CH3 Base
O H O H HOCH2 O H
H
4) HH HH 5) OH H O
HO H HO CH2OH
O H H OH OH H
HO P O
O
CH2 Base
O

HH HH

O H
HO P O
O
CH2 Base
O

HH HH

O H
HO P O
O
CH2 Base
O

HH HH
O
OH H H
N

O O O N
6) H3C CH2 CH2 CH2 CH2 CH2 CH2 CH2 CH2 C 7) HO P O CH2 O
OH OH
HH HH
NH2 O OH OH
8) NH2 C NH CH2 CH2 CH2 CH C
N H OH
H

CH2OH CH2OH CH2OH CH2OH

O O O O H H H H H
9) 10) H C C C C C
O O O O OH
OH OH OH OH O
OH OH OH OH

4) single strand of 4 bases in DNA 8) amino acid

5) disaccharide sugar or carbohydrate 9) polysaccharide
6) fatty acid 10) 5 carbon sugar
7) ribonucleotide

Copyright © Pearson Education, Inc., publishing as Benjamin Cummings

5
 ?
Activity 4/5.2 What Predictions Can You Make about the
Behavior of Organic Macromolecules If You Know Their
Structure?
1. Twenty amino acids are commonly utilized in the synthesis of proteins. These amino
acids differ in the chemical properties of their side chains (also called R groups). What
properties does each of the following R groups have? (Note: A side chain may display
more than one of these properties.)

R Group Basic, acidic or Polar or nonpolar? Hydrophilic or

neutral? hydrophobic?
a.
CH2 Neutral Nonpolar Hydrophobic

CH
CH3 CH3

b.
CH2 Acidic Polar Hydrophilic

C
–O O

c.
CH2 Basic Polar Hydrophilic

CH2
CH2
CH2
NH3+

d.
CH2 Neutral Polar Hydrophilic

OH

Copyright © Pearson Education, Inc., publishing as Benjamin Cummings

6
2. Polypeptides and proteins are made up of linear sequences of amino acids. In its
functional form, each protein has a specific three-dimensional structure or shape.
Interactions among the individual amino acids and their side chains play a major role in
determining this shape.
a. How are amino acids linked together to form polypeptides or proteins? What is this
type of bond called?
Amino acids are covalently linked together via peptide bonds to form polypeptides or
proteins. (See Figure 5.18, in Biology, 7th edition.)

b. Define the four structures of a protein. c. What kinds of bonds hold each of these
together?
Primary: Covalent peptide bonds formed by
The linear sequence of amino acids in a dehydration reactions hold the individual
polypeptide or protein amino acids together in the polypeptide chain.

Secondary: The secondary structure results from H

α helix or β pleated sheet conformations bonding relationships set up between the H
occurring at regular intervals along the attached to the N in one amino acid and the O
polypeptide attached to the C of another amino acid. (See
Figure 5.20.)
Tertiary: Hydrogen and covalent bonds between side
The folded or functional conformation chains (R groups) of various amino acids
of a protein contribute, as do hydrophobic interactions and
van der Waals interactions.
Quaternary: Hydrogen and covalent bonds between side
The folded or functional conformation chains (R groups) of various amino acids
of a protein made up of more than one contribute, as do hydrophobic interactions and
polypeptide chain van der Waals interactions.

3. Lipids as a group are defined as being hydrophobic, or insoluble in water. As a result,

this group includes a fairly wide range of compounds—for example, fats, oils, waxes, and
steroids like cholesterol.
Dehydration reactions between the OH of the carboxyl group on the fatty acid and the
OH group on the glycerol molecule bond the fatty acids to the glycerol moleculea. How
are fatty acids and glycerol linked together to form fats (triglycerides)?
b. What functions do fats serve in living organisms?
In general, fats are energy storage molecules.
c. How do phospholipids differ from triglycerides?
Phospholipids have one of the OH groups of the glycerol interacting with a phosphate-
containing side group—for example, phosphatidylcholine as in Figure 5.13.

Copyright © Pearson Education, Inc., publishing as Benjamin Cummings

7
d. What characteristics do phospholipids have that triglycerides do not have?
Phospholipids are amphipathic because the phosphate-containing side group is
hydrophilic and the remainder of the molecule is hydrophobic. Triglycerides are
hydrophobic.

4. Use your understanding of the chemical characteristics of the four major types
of macromolecules in living organisms to predict the outcome of the following
experiments. Be sure to explain your reasoning.

Experiment a: You stir 10 g of glucose and 10 ml of phospholipids in a 500-ml beaker

that contains 200 ml of distilled water. Draw a diagram to show where and how the
glucose and phospholipids would be distributed after you let the mixture settle for about
30 minutes.
The 10 g of glucose will dissolve in the water and be relatively evenly distributed in the
water. The phospholipids will float on the surface of the water. The phospholipids at the
water interface will have their hydrophilic phosphate heads in the water and their
hydrophobic tails sticking out of the water. Any phospholipids trapped under the water
may form micelles, with their fatty acid tails on the interior and their phospholipid heads
pointing outward. It is possible that some of the phospholipids will form bilayers, which
organize themselves into spheres containing small amounts of water.

Experiment b: You do Experiment a again, but this time you stir 10 g of glucose and
10 ml of phospholipids in a different 500-ml beaker that contains 200 ml of distilled
water and 100 ml of oil. Draw a diagram to show where and how the glucose,
phospholipids, and oil would be distributed after you let the solution settle for about
30 minutes.
Similar to experiment a, the 10 g of glucose will dissolve in the water and be relatively
evenly distributed in the water. Depending on how vigorously the system is mixed, the
phospholipids may still float on the surface of the water. The phospholipids at the water
interface will have their hydrophilic phosphate heads in the water and their hydrophobic
tails associated with the oil layer above the water. Any phospholipids trapped under the
water may form micelles, with their fatty acid tails on the interior and their phospholipid
heads pointing outward. It is possible that some of the phospholipids will form bilayers,
which organize themselves into spheres containing small amounts of water. Any
phospholipids trapped in the oil layer may form inverted micelles, with their hydrophilic
heads interior and their hydrophobic tails on the surface.

Copyright © Pearson Education, Inc., publishing as Benjamin Cummings

8
Experiment c: To completely fill a sealed 500-ml glass container that contains 490 ml
of distilled water, you inject 10 ml of phospholipids into it. (A small gasket allows the air
to leave as you inject the phospholipids.) You shake this mixture vigorously and then let
it settle for an hour or more. Draw a diagram to show how the phospholipids would be
distributed in the container.
Under these circumstances, only micelles (and some phospholipid bilayer spheres) are
likely to form.

Experiment d: A globular protein that is ordinarily found in aqueous solution has these
amino acids in its primary structure: glutamic acid, lysine, leucine, and tryptophan.
Predict where you would find each amino acid: in the interior portion of the protein
(away from water) or on the outside of the protein (facing water). (Refer to Figure 5.17,
page 79.)
Glutamic acid and lysine are electrically charged and will therefore be on the outside of
the protein. Leucine and tryptophan are nonpolar and will be inside the protein.

Experiment e: Drawn below is part of the tertiary structure of a protein showing the
positions of two amino acids (aspartic acid and lysine). Replacing lysine with another
amino acid in the protein may change the shape and function of the protein. Replacing
lysine with which type(s) of amino acid(s) would lead to the least amount of change in
the tertiary structure of this protein? (Refer to Figure 5.17, page 79.)

Ionic bond O
CH2 CH2 CH2 CH2 NH3+ –O C CH2
Lysine Aspartic
acid

Aspartic acid has a negatively charged R group. Lysine has a positively charged side
group. To cause the least amount of change in the tertiary structure of this protein, you
have to replace lysine with an amino acid that contains a positively charged side group,
like arginine or histidine.

Copyright © Pearson Education, Inc., publishing as Benjamin Cummings