Scribd
Upload
341 views

Scab Liner Packer (SLP) : Specification Guide

The Scab Liner Packer (SLP) is used to isolate casing leaks or perforations. It consists of an upper and lower packer connected by a liner. The packers are set using tubing or drill pipe and lock into place with body rings. Once set, the SLP does not connect to the tubing string so tubing can be pulled without disturbing the SLP. The system allows injection or production tubing to be run through to access tools below.

Uploaded by

catalin calin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
341 views

Scab Liner Packer (SLP) : Specification Guide

The Scab Liner Packer (SLP) is used to isolate casing leaks or perforations. It consists of an upper and lower packer connected by a liner. The packers are set using tubing or drill pipe and lock into place with body rings. Once set, the SLP does not connect to the tubing string so tubing can be pulled without disturbing the SLP. The system allows injection or production tubing to be run through to access tools below.

Uploaded by

catalin calin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

432.552.0102 • www.watsonpacker.

com

Scab Liner Packer (SLP)


The Scab Liner Packer (SLP) is an economical alternative to cement squeezing casing
Upper Packer
leaks or to isolate perforations. The system consists of an upper and lower packer with liner
attached between them. Since the SLP uses packer-type sections it has proven to be much
more durable than cup-type scab liners. The ID’s through the system are generally limited
by the liner and frequently allow injection or production tubing to be run through the
system and attached to existing tools below the SLP.

The packers and liner are carried in the hole with tubing or drill pipe, 1/4 turn rotationally
set and mechanically packed off with pipe weight. After setting, pack off forces are
retained by body lock rings in both packers. The SLP does not remain connected to the
tubing string and is not affected by production or injection tubing movement. Tubing
can be pulled and re-run without disturbing the SLP The SLP can be retrieved with the Perforations or
running tool if desired. Casing Leak

Specification Guide
Liner

Casing Liner Packer


Size Weight Size O.D. I.D.
41/2 9.5 - 12.6 27⁄8 3.75 2.5
5 15.0 - 18.0 27⁄8 4 2.5
51/2 14.0 - 20.0 4 4.641 3.35
7 20.0 - 29.0 41⁄2 5.95 4.5
Lower Packer
75/8 20.0 - 33.7 51⁄2 6.5 5
85/8 24.0 - 40.0 51⁄2 7.5 5
95/8 32.3 - 43.5 7 8.5 6.5
* Other sizes and connections available on request

rev. 04/2014 wat s o n pac ker llc p ri c e b o o k 43

You might also like