Scribd
Upload
497 views6 pages

Project 1-Eco Cooler

This project report describes the development of an "Eco Cooler System" to provide cooling without electricity. The system uses plastic bottles and a board with holes to hold the bottles. Water evaporating from the bottles cools the air inside. Testing showed the system lowered temperatures by 4-5 degrees Celsius. The project aims to help rural Pakistanis cope with extreme heat without power. It aligns with UN sustainable development goals on access to energy. The report outlines planning, testing, budget, challenges and goals achieved through this affordable and sustainable cooling solution.

Uploaded by

Sumon Rejaul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
497 views6 pages

Project 1-Eco Cooler

This project report describes the development of an "Eco Cooler System" to provide cooling without electricity. The system uses plastic bottles and a board with holes to hold the bottles. Water evaporating from the bottles cools the air inside. Testing showed the system lowered temperatures by 4-5 degrees Celsius. The project aims to help rural Pakistanis cope with extreme heat without power. It aligns with UN sustainable development goals on access to energy. The report outlines planning, testing, budget, challenges and goals achieved through this affordable and sustainable cooling solution.

Uploaded by

Sumon Rejaul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Project Report

ECO COOLER SYSTEM


Course: Business Management and Ethics
Instructor: Miss Hareem Siddiqui

Group Members:
Hafiz Umar Bin Mohsin
Muhammad Fawad
Junaid Qazi
Introduction
Summer is in full swing and many of us are complaining about the heat. But few
places reach the scorching temperatures which residents of Pakistan experiences
and air conditioning is simply not an option for most people living in rural areas.
a clever DIY cooling system that doesn’t need any electricity and is built from a
common waste item: empty plastic soda bottles and we call it Eco Cooling System.

Objective
The Objective of our project is to built a device which is not only smart in a sense
that it do not consume electricity but in essence it is a way to recycle wasted raw
material for sustainable development of our society by reducing environmental
pollution as well as reduction in power usage.

Sustainable Development Goals


According to United Nations there are 17 different area on which people need to
work on to transform our world into sustainably developed society. This Project
comes under those goals on goal number 7 which is to ensure access to
sustainable, reliable, affordable and modern energy for all.

Project Description
To make an Eco-Cooler we take a piece of board cut to the size of a window on
your house. Then drill holes in the board big enough to push a plastic neck
through. Gather some old plastic bottles and cut the bottoms off, then slide the
neck of each bottle through the holes and secure them with the cap. Do this until
the board is full. Hang the board on the window and watch the temperature
inside drop.
Planning
The Planning phase of any project matters a lot as we draw the whole picture of
its design, implementation and control within our planning phase. In our Case we
planned to divide the project into each individual group partner. like one person
of our group was given the task to collect used bottles from market and other was
assigned to built the board of specific size as per the area of window on which the
project was to be installed.

Organizing
After the project was built we placed it on the window of our group partner's
house for testing purpose. we used thermo hygro meter to measure the
temperature difference between inside the room and outside. first the
temperature was checked without placing the Eco Cooling system and then it was
checked by installing it to test its effect. Graph show the results of temperature
difference.
Temperature Profile Day 1
36
34
32
30
28
26
24
22
20
10:45 11:15 11:45 12:15 1:30

Outside Inside

Temperature Profile Day 2


36
34
32
30
28
26
24
22
20
10:15 10:45 11:30 12:45 1:15 1:45 2:30

Outside Inside
Average temperature Gradient

3.4
Day 2

5
Day 1

25 27 29 31 33 35

Inside Outside

Budget:
Eco Cooling System is very cheap to built, the cost you can assume to built a 50" X
50" Eco System is within Rs. 500/-

Example: If 35 bottles are used at rate of Rs. 4 per bottle= Rs. 140/- and the Card
Board purchased would cost around Rs. 200/- , the whole price you can assume
including drilling the whole in card board is within Rs. 500/-

Challenges
Every time we face different Challenges to cope up with the situations. In Our
Project the main Challenges we faced were at the time of collection of bottles
because used bottles aren't easily available in market. we visited different scrap
yard shops and finally after striving a lot we bought those bottles from bottle
street near saddar.

Achievement of Goal
As per out target to built the a device which cools the environment with 4 - 5
degrees without using electricity, we proudly say that we are successful on
achieving our goals hence now comes the point how to implement it on broader
scale in Pakistan, as from last few years we see many people died in Pakistan due
to heat stroke incidents either they were living below the poverty line or due to
shortage of electricity, the people were unable to save their life. So this device
would eventually be helpful for many people.

Longevity:
As per Our discussion with an NGO, which is providing different volunteering
services for the betterment of peoples in interior Sindh. Our further plan is to
implement this project in rural areas of sindh where this could bring a better
change in their lives with sustainability.

You might also like