PB-360E-EN-EU_8sid_CMYK.qxd 05-05-31 17.

01 Sida 1

HIAB 360 E Capacity 36 tm

Product brochure

www.hiab.com
PB-360E-EN-EU_8sid_CMYK.qxd 05-05-31 17.02 Sida 2
PB-360E-EN-EU_8sid_CMYK.qxd 05-05-31 17.02 Sida 3

The compact and powerful crane

The HIAB 360 E will reach out

The HIAB 360 E is a crane well suited for tasks where reach is a top
priority. It has a very powerful and stable boom system enabling even
heavy loads to be hoisted high. Yet, by using the latest computer aided
design technology, high-tensile steel and an advanced, hexagonal-shaped
boom system, the weight of this crane has been kept down. The result is
increased payload capacity and greater productivity, and a boom system
that is free of hanging hoses. The boom has a low headroom profile,
providing easy access to confined spaces.

High reliability provides for low maintenance

The reliable HIAB 360 E can be fitted with up to 8 hydraulic extensions
providing a maximum hydraulic outreach beyond 21 metres.
Add a HIAB Jib-65X with manual extensions and the outreach can be
extended up to an outstanding 33 metres. The crane is equipped with
the MiniSPACE intelligence system and control levers positioned at
the base of the crane. The HIAB Valve 50 is the main hydraulic valve.
A very well tested and reliable control valve. As an option you can also
order your crane with the top-of-the-line HIAB Valve 91.

3
PB-360E-EN-EU_8sid_CMYK.qxd 05-05-31 17.02 Sida 4

HIAB 360 E Capacity 36 tm

Front runners in boom design
A Hiab crane is built to withstand extreme loading under all kinds of
circumstances, in all field conditions. Keeping the boom reliable,
tough and sturdy under extreme loading has made Hiab a world leader
in crane boom engineering. Taking a closer look at the crane, one can
point out a number of features that our customers benefit from.

Optional side supports

On cranes equipped with an optional hose and pipe kit, side supports
are fitted on each boom extension. These supports stabilize the boom
laterally and minimize play.

Hexagonal boom profile

The hexagonal profile used on Hiab booms is a ground-breaking
design introduced by Hiab many years ago. It is now standard through-
out the market of loader cranes. Even the smallest of Hiab cranes bene-
fit from this design.

360 E

E-link
A first boom link makes it possible to lift a
heavier load close to the column, and the
second boom link helps in lifting to higher
positions such as scaffolding.

Load-holding valve
The load-holding valve reduces the risk
of injuries in the unlikely case that a
hydraulic hose should burst. The crane
will keep holding the load no matter what
happens.

High-torque slewing system

A heavy-duty, high-torque slewing
system ensures safe and efficient opera-
tion even on inclines or slopes.

Hoses internally Oil bath

The hoses are run internally in the crane On most Hiab cranes over six tonne
body and in the outrigger beam, where metres the slewing mechanism is kept in
they are out of harm’s way, thus reducing an oil bath. This keeps the slewing mecha-
maintenance costs. nism in great condition throughout the
years making sure the crane can be confi-
dently used for extremely demanding
applications.

4
PB-360E-EN-EU_8sid_CMYK.qxd 05-05-31 17.02 Sida 5

Hexagonal boom profile Low headroom

The hexagonal profile used on Hiab The boom extension cylinders are posi-
booms is a ground-breaking design intro- tioned so that the one furthest out is
duced by Hiab many years ago. It is now always as low as possible. This provides
standard throughout the market of loader easy access to confined spaces.
cranes. Even the smallest of Hiab cranes
benefit from this design.

JIC couplings Large slide pads Attachable tools

JIC couplings are standard on most Hiab The hexagonal profile enables the use of A wide range of attachable tools are avail-
cranes. They assure secure coupling easily, larger slide pads. This makes the exten- able for your Hiab crane. These make sure
and are still very easy to disconnect for sions move smoother and reduces you can carry out a lot of different tasks.
service. mechanical wear on the boom.

5
PB-360E-EN-EU_8sid_CMYK.qxd 05-05-31 17.02 Sida 6

HIAB 360 E Capacity 36 tm

MiniSPACE intelligence system

The MiniSPACE system intelligently monitors and controls the elec-
tronic functions of your crane.
Safety is managed by an Over Load Protection (OLP) function. The OLP
also enables you to work in front of the truck cabin, an area that is tradi-
tionally not possible to operate in. High boom warning also contributes
to the increased safety that Hiab is so well known for.
Automatic Dumping of Oil (ADO) keeps the oil in top condition and
thus reduces maintenance costs. This is done by leading the oil straight
back into the tank when the crane is running idle.
Further more, the system handles functions primarily used by service
personnel such as fault code indication and load cycle data.

Operating your crane by remote control

The benefit of Hiab’s remote control units ensures that the crane operator
can be positioned at the best possible location when operating the crane.
This leads to more efficient, comfortable work and also increases safety.
A further spin-off effect is that you can be your own loading assistant
due to the fact that you can position your self next to the load, or wher-
ever the loading assistant would be standing. Your tasks will be
completed faster and at a lower cost.

CombiDrive
The HIAB CombiDrive control unit can
handle up to 12 proportional functions,
thereby controlling all movements with
the same precision.

Controlled extension and retraction Valve 50

sequence The HIAB Valve 50 is an extremely well
A controlled sequence means that the tested design, which offers total reliability
extensions always move in the same order. and low service costs. It is an open centre
Extracting and retracting the extensions in valve and can handle a maximum pump
a controlled sequence means that the total flow of approximately 60 litres per
weight is lower, this is of most importance minute.
on a long boom system.

JIC couplings
JIC couplings are standard on most Hiab
cranes. They assure secure coupling easily,
and are still very easy to disconnect for
service.

6
PB-360E-EN-EU_8sid_CMYK.qxd 05-05-31 17.02 Sida 7

7
PB-360E-EN-EU_8sid_CMYK.qxd 05-05-31 17.02 Sida 8

PB-360E-EN-EU;041014
BD 360E EN EU_4sid.qxd 05 08 19 11.09 Sida 1

HIAB 360 E Capacity 36 tm

HIAB 360 E Basic data
HIAB 360 E-7 jib 65X-3
Min. 7740 Max. 26886
350 Min. 2640 Max. 7456
83
˚

30˚
55˚
2905

350 Min. 4918 Max. 21548

83
˚

55˚
2905
2490 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 m

34
33 ~ 420 kg
32
31 ~ 530
30
29 ~ 690
28
~ 920
27
26
25
24
~ 1330

~ 2240
Basic data
23
22
2720

21
20
19
1340 690 420 kg
18 2070 920 530
17
16
15
14
83˚
13
12 70˚ 760 630 420 kg
11 860 690 530
10
9
8
7
45˚
6
5

150 4
3
2
320 270 190 kg
1 -10˚ 360 290 220
0
-1
-2
-3 330 270 190 kg
370 290 220
-4

Disclaimer
BD-360E-EN-EU_050818

Hiab cranes has been built to meet the highest standards of safety and service life and has been thoroughly tested. Strength calculations for this model have
been carried out in accordance with DIN 15018. Hiab’s certified Quality Assurance System complies with the ISO 9001. Some of the items in our literature
may be extra equipment. Certain applications may require an official permit. We reserve the right to change technical specifications without prior notice.
Hiab cranes produced for EU-countries are CE-marked and comply with the European Standard EN 12999. www.hiab.com
BD 360E EN EU_4sid.qxd 05 08 19 11.09 Sida 3

HIAB 360 E Basic data

Technical data 360 E-3 360 E-4 360 E-5 360 E-6 360 E-7 360 E-8 HIAB 360 E-8
Max. lifting capacity (kNm) 324 316 308 300 294 289 350 Min. 4918 Max. 21548

Outreach - hydraulic extensions (m) 10.5 12.6 14.8 17.0 19.2 21.5 83
˚
Outreach - manual extensions (m) 23.9 23.8 23.8 23.9 23.9 -
Outreach - jib (m) - - - 24.5 26.7 -
Outreach / lifting capacity (m / kg) 2.0 / 14600* 2.0 / 14300* 2.0 / 14000* 2.0 / 13800* 2.0 / 13600* 2.0 / 13500*

55˚
3.0 / 10000* 3.0 / 10000* 3.0 / 9900* 3.0 / 9700* 3.0 / 9500* 3.0 / 9400*

2905
4.8 / 6900 4.8 / 6700 4.8 / 6500 4.8 / 6350 4.8 / 6200 4.8 / 6100
6.5 / 4950 6.5 / 4750 6.5 / 4550 6.5 / 4400 6.6 / 4150 6.6 / 4050
8.4 / 3750 8.4 / 3550 8.4 / 3350 8.4 / 3150 8.5 / 2950 8.5 / 2850
10.5 / 2980 10.5 / 2760 10.5 / 2560 10.5 / 2370 10.5 / 2200 10.5 / 2080
- 12.5 / 2280 12.5 / 2080 12.5 / 1880 12.6 / 1700 12.6 / 1580
- - 14.7 / 1740 14.7 / 1540 14.8 / 1350 14.8 / 1240
- - - 16.9 / 1320 17.0 / 1130 17.0 / 1000
- - - - 19.2 / 980 19.1 / 860
- - - - - 21.4 / 760
Outreach / Lifting capacity, with jib (m / kg) - - - 19.6 / 610 21.8 / 360 -
- - - 21.1 / 550 23.3 / 320 -
- - - 22.7 / 500 24.9 / 290 -
- - - 24.4 / 460 26.6 / 270 -
Slewing angle 400° 400° 400° 400° 400° 400° 2490 0 2 4 6 8 10 12 14 16 18 20 22 m
25
Height in folded position (mm) 2410 2410 2410 2410 2410 2410 13500
24
9400
Width in folded position (mm) 2490 2490 2490 2490 2490 2490 23
6100
22
Installation space needed (mm) 1304 1358 1373 1373 1373 1373 4050
21
2850
Weight - ”standard” crane without stabilizers (kg) 3860 4090 4325 4605 4810 4940 20
2080
Weight - stabilizer equipment (kg) 450 - 730 450 - 730 450 - 730 450 - 730 450 - 730 450 - 730 19
1580
18
Weight - jib (kg) - - - 690** 655** - 1240
17
* May require special hook or special hook position
1000
16
860

2410
** Incl. hose and pipe kit 15
760
14
13
12
11
10
9
8
7
6
5
150 4
3
2
1
0
-1
-2