Scribd
Upload
118 views

Working With Complex Numbers in Mathcad

This article provides an overview of working with complex numbers in Mathcad. It defines complex numbers, describes how to enter them in Mathcad, and explains how to perform basic operations like addition and multiplication on complex numbers. It also discusses representing complex numbers as points in the plane and explores properties of complex exponential functions and roots of unity.

Uploaded by

mehdi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
118 views

Working With Complex Numbers in Mathcad

This article provides an overview of working with complex numbers in Mathcad. It defines complex numbers, describes how to enter them in Mathcad, and explains how to perform basic operations like addition and multiplication on complex numbers. It also discusses representing complex numbers as points in the plane and explores properties of complex exponential functions and roots of unity.

Uploaded by

mehdi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Article from PTC Express February 2010 Seite 1 von 8

Article from PTC Express February 2010 (http://www.imakenews.com/ptcexpress/e_article001699706.cfm?


x=bgJmVTd,bfykm6rD)

March 14, 2010


Working with Complex Numbers in Mathcad
by Mathcad Staff

A complex number is an expression of the form

where x and y are real numbers, and

For example, the following is a complex number:

To enter this number, type 2 + 13i in a math


region.
Note: If the coefficient of i in a complex number is 1,
you must type 1i when entering the number. Otherwise,
Mathcad interprets i as an undefined variable. For
example, to enter i itself, type 1i.

Mathcad does not display the coefficient 1. Note that i is


the square root of -1.

Addition and multiplication of complex numbers is defined as


follows:

Here are some examples:

Real and Imaginary Parts


For a complex number x + yi, x is called the real part
and y is called the imaginary part. The functions Re and
Im return the real and imaginary parts, respectively.

Representing Complex Numbers as Points in the Plane


You can represent a complex number x + yi as the point
(x, y) in the plane. For example, 2 + 3i corresponds to
the point (2, 3), as shown in the graph below.

http://www.imakenews.com/eletra/mod_print_view.cfm?this_id=1699706&u=ptcexpr... 22.03.2010
Article from PTC Express February 2010 Seite 2 von 8

This representation is useful for visualizing operations such


as multiplication on the complex numbers.
The argument of a complex number z is the angle in
radians that the vector corresponding to z makes with
the x-axis. The argument, denoted arg(z), is assumed
to be between -π and .π

The function arg returns the argument of z.

When you multiply two complex numbers, the argument


of the product is the sum of their arguments, provided
the sum is between -π and -.π For example,

http://www.imakenews.com/eletra/mod_print_view.cfm?this_id=1699706&u=ptcexpr... 22.03.2010
Article from PTC Express February 2010 Seite 3 von 8

Since the argument of i is π/2 or 90 degrees, multiplying


a complex number by i rotates the corresponding point
by 90 degrees in the counter-clockwise direction.
The magnitude of a complex number is the distance
from the point to the origin. You can compute the
magnitude using the absolute value operator on the
Calculator toolbar.

The magnitude of the product of two complex numbers is


the product of their magnitudes.
The Complex Exponential Function
The usual exponential function on the real numbers can be
extended to the complex numbers by the following
definition.

When the exponent is purely imaginary - that is, when its


real part is 0, this equation becomes

The magnitude of eyi is

So eyi corresponds to a point on the unit circle in the


complex plane. For example,

http://www.imakenews.com/eletra/mod_print_view.cfm?this_id=1699706&u=ptcexpr... 22.03.2010
Article from PTC Express February 2010 Seite 4 von 8

If you square a complex number z on the unit circle, the


magnitude is 1, since

The argument of z2 is twice the argument of z,


since

For example,

Roots of Unity
In the complex numbers, the equation

has n distinct solutions, called the nth roots of unity. These


are defined as follows. Let

α corresponds to the point on the unit circle in the

http://www.imakenews.com/eletra/mod_print_view.cfm?this_id=1699706&u=ptcexpr... 22.03.2010
Article from PTC Express February 2010 Seite 5 von 8

complex plane whose angle is /n.


Note that α is a solution to the equation

The nth roots of unity are the numbers

For example, if n = 3, the cube roots of unity are the


numbers

Since raising αto any power k multiplies the argument of


α by k, the powers of α are evenly spaced around the
unit circle. The following graph shows the case n = 3.

Note that each of these numbers is a solution to the


equation

Complex Results and the Principal Value


Using the exponentiation operator to find the nth root of a
negative number often returns a complex solution, even
though a real solution may be present. Consider the cube root
of -27:

http://www.imakenews.com/eletra/mod_print_view.cfm?this_id=1699706&u=ptcexpr... 22.03.2010
Article from PTC Express February 2010 Seite 6 von 8

even though

Principal Value
When there are multiple roots, as is the case here, the
exponentiation operator returns the principal value, that is
the value with the smallest positive angle with respect to the
positive real axis in the complex plane.
Note that the nth root operator always defaults to the
positive root, if one is available. (Note the nth root operator is
on the Calculator toolbar or type [Ctrl]] [\].

If there is no real root, the nth root operator defaults to the


principal value.
arg Function
The principal value is not always the positive root. Mathcad's arg
function can be used to validate this assertion.

returns the principal argument of z between - and ,


including .

whereas

http://www.imakenews.com/eletra/mod_print_view.cfm?this_id=1699706&u=ptcexpr... 22.03.2010
Article from PTC Express February 2010 Seite 7 von 8

To find all three solutions, including the positive root, you can
solve for the roots symbolically. First, set up an equation to
solve using any variable and the Boolean equality from the
Boolean toolbar or by typing [Ctrl] =

Next, use the solve keyword from the Symbolic toolbar to find the
roots.

Note that Mathcad displays all values simultaneously, both real and
complex.
It is also possible to find these roots numerically, using the polyroots
function.

Right-click, choose Save Target As, and change the


extension to XMCD and File Type to All to download
Mathcad 14 file .

Was this article helpful? Let us know.

Published by PTC

contact PTC | PTC Express archive | privacy policy | subscribe | unsubscribe | change
preferences | edit profile

http://www.imakenews.com/eletra/mod_print_view.cfm?this_id=1699706&u=ptcexpr... 22.03.2010
Article from PTC Express February 2010 Seite 8 von 8

This e-mail was sent to: [[EMAIL]]Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â PTC, 140 Kendrick Street, Needham, MA 02494
USA

http://www.imakenews.com/eletra/mod_print_view.cfm?this_id=1699706&u=ptcexpr... 22.03.2010

You might also like