Scribd
Upload
878 views

Problems On Projection of Points

The document provides instructions for drawing the projections of various points located at different distances from the principal planes of projection (HP, VP, and PP) in 3D space. It includes 22 problems describing the position of each point relative to the planes and asks the reader to draw the projections. The problems cover a range of scenarios including points touching multiple planes, finding distances, and drawing multiple points based on their front or top views.

Uploaded by

Mohith Nani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
878 views

Problems On Projection of Points

The document provides instructions for drawing the projections of various points located at different distances from the principal planes of projection (HP, VP, and PP) in 3D space. It includes 22 problems describing the position of each point relative to the planes and asks the reader to draw the projections. The problems cover a range of scenarios including points touching multiple planes, finding distances, and drawing multiple points based on their front or top views.

Uploaded by

Mohith Nani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Projections of Points

1. A point is 30 mm behind VP, 30 mm above HP and 30 mm in front of right profile plane. Draw its
projections.
2. A point is 35 mm below HP, 20 mm behind VP and 25 mm behind right profile plane. Draw its
projections.
3. A point is 30 mm behind VP, in HP and 20 mm in front of left profile plane. Draw its projections.
4. A point P is 40 mm in front of VP, 50 mm above HP and 60 mm in front of right PP. Draw the
three principal views of the point.
5. A point P is 40 mm above HP, 60 mm behind VP and 50 mm in front of right PP. Draw the three
principal views of the point.
6. Draw the three principal views of a point P lying 70 mm behind VP, 60 mm below HP and 50 mm
behind the left profile plane.
7. Draw the three principal views of a point P lying 65 mm below Hp, 70 mm in front of VP and 50
mm in front of the right plane.
8. A point is 30 mm in front of VP, 20 mm above HP and 25 mm in front of left PP. Draw its
projections.
9. A point is 30 mm behind VP, 15 mm above HP and 25 mm in front of left profile plane. Draw its
projections.
10. A point is 20 mm behind VP, 40 mm above HP and 25 mm in front of left profile plane. Draw its
projections.
11. A point touches all the three principal planes of projections. Draw its projections.
12. Draw the projections of a point lying 20 mm above HP and is in the first quadrant when its shortest
distance from the line of intersection of HP and VP is 40 mm. Also find the distance of the point
from VP.
13. A point is lying in HP, 20 mm behind VP and 25 mm behind right profile plane. Draw its
projections.
14. Draw the projections of a point lying in VP, and 25 mm below HP and 30 mm- behind left profile
plane.
15. Draw the projections of the following points :
a) A is 20 mm in front of VP and 30 mm above HP.
b) B is 30 mm in front of VP and in HP.
c) C is 40 mm behind VP and 20 mm below HP.
d) D is 30 mm behind VP and 10 mm above HP.
e) E is 40 mm in front of VP and 30 mm below HP.
f) F touches both HP and VP.
16. Draw the projections of a point 30 mm in front of VP, in HP and 25 mm in front of left profile
plane.
17. Draw the top, front and profile views of a point 40 mm in front of VP, 30 mm below HP and 25
mm in front of right profile plane.
18. A point lying 20 mm above the XY line represents the front views of two points E and F. The top
view of E is 35 mm behind VP, and the top view of F is 40 mm in front of VP. Draw the projections
of the two points and state their positions with reference planes and the quadrants in which they lie.
19. A point lying 20 mm below the XY line is the top view of three points P, Q and R. P is 25 mm
below HP. The point Q is 35 mm above HP and the point R is in HP. Draw the projections of the
three points and state their positions with the reference planes and the quadrants in which they lie.
20. A point lying 20 mm below the XY line is the front view of two points P and Q. P is 25 mm in front
of VP. The point Q is 35 mm behind VP. Draw the projections of the two points and state their
positions with the reference planes and the quadrants in which they lie.
21. The front and left views of a point are 40 mm above XY line and are at distances of 50 mm and 60
mm from X1Y1 line respectively. Draw the three views of the point. How far the point is in front of
VP.
22. Draw the projections of the following points and identify the positions.

You might also like