Project: Interior for GE Digital @ ChennaiOwner : GE Digital

SUMMARY SHEET

Date: 06-07-2017

R3

SL.
DESCRIPTION OF WORKS AMOUNT IN RS.
No.

A INTERIOR FITOUT SCOPE

1.00 FLOORING 4,678,565.00

2.00 FALSE CEILING 5,847,990.00

3.00 PARTITION 6,698,405.00

4.00 DOORS 310,000.00

5.00 LOOSE FURNITURE 2,692,785.70

6.00 WALL FINISHES 1,962,900.00

7.00 MISCELLANEOUS WORKS 2,016,605.00

8.00 CIVIL WORKS 1,669,950.00

9.00 BLINDS 668,393.00

10.00 KITCHEN EQUIPMENT 1,083,596.00

11.00 PLUMBING WORKS 311,323.00

12.00 SIGNAGE WORKS 59,487.00

GRAND TOTAL IN RUPEES EXCLUDING TAX 28,000,000

GST is not considered & applicable as per the stds

1 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

BILL OF QUANTITIES FOR INTERIOR FIT OUT

Sl.no Description Unit Qty Rate

1.00 FLOORING
1.01 MARBLE FLOORING - WILLIAM GREY sqm 110.00 8,600.00
Reception
Providing, cutting and laying 18-20mm thick machine cut and polished
approved Marble in pattern as indicated in drawing set in cement slurry
over 1:4 cement mortar bed of 25mm average. Joints in the flooring to
be filled with approved grout of approved shade as per manufacturers
specifications.

Quoted rate to include the cost of wastages, lead and lift, curing,
protection with 3mm Celloboard joined with Masking Tape, one coat of
stone guard till hand-over & cleaning.

Quoted rate to include the cost of chipping the floor (if required) to lay
the new flooring, and catering away the debris from site.

Consider basic rate of Marble at Rs 4845/Sqm.(Excluding tax).

Mode of Measurement : Laid area will be measured for payment.
Note: Dry lay pattern to be approved by Client/PMC/Architrecht
before commencement of work,slab sizing drawings needs to be
provided by vendor.

1.02 VITRIFIED TILE FLOORING - 600 x 600mm- TY-01 sqm 210.00 2,060.00
Cafeteria/corridor towards toilet
Providing and laying vitrified tile flooring with 3mm Spacers over 1:4
cement mortar set in cement slurry. Joints between tiling to be filled
with approved Epoxy grout of approved shade as per manufacturers
specifications. Rate to include cost for laying tiles to approved pattern,
design as directed by Architect, including curing, acid wash, etc.

Quoted rate to include the cost of curing, protection with polythene

sheet and POP overlay till hand-over.

Quoted rate to include the cost of Chipping and removing the Existing
Flooring , along with shifting the Debris from Site

Consider basic rate of Vitirified Tile at Rs.950/Sqm.(Excluding

tax).- PAVIGRIS Make
Mode of Measurement : Laid area will be measured for payment.

1.03 VITRIFIED TILE FLOORING - 600 x 600mm- TY-02 sqm 75.00 1,650.00
Potwash/cutlery store/food holding area/tuck shop/ bainemarie
Providing and laying vitrified tile flooring with 3mm Spacers over 1:4
cement mortar set 20mmthk average in cement slurry. Joints between
tiling to be filled with approved Epoxy grout of approved shade & make
to match the color of the tile as per manufacturers specifications. Rate
to include cost for laying tiles to approved pattern, design as directed by
Architect, including curing, acid wash, etc.

2 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Quoted rate to include the cost of curing, protection with polythene

sheet and POP overlay till hand-over.

Quoted rate to include the cost of Chipping and removing the Existing
Flooring , along with shifting the Debris from Site

Consider basic rate of Vitirified Tile at Rs. 646/Sqm.(Excluding

tax).
Mode of Measurement : Laid area will be measured for payment.

1.04 VITRIFIED TILE DADOOING - 600 x 600mm sqm 210.00 1,390.00

Handwash/potwash/cutlery store/food holding area
Providing and laying vitrified tile Dadooing 600 x 600mm with 3mm
Spacers over 1:6 cement mortar set in cement slurry. Joints between
tiling to be filled with approved grout of approved shade as per
manufacturers specifications. Rate to include cost for laying tiles to
approved pattern, design as directed by Architect, including curing, acid
wash, etc.

Quoted rate to include the cost of curing, protection with polythene

sheet and POP overlay till hand-over.

Consider basic rate of Vitirified Tile at Rs. 646/Sqm.(Excluding

tax).
Mode of Measurement : Laid area will be measured for payment.

1.05 CERAMIC TILE DADOOING - 600 x 600mm sqm R/o 1,406.00

Providing and laying Ceramic tile Dadooing 600 x 600mm with 3mm
spacers over 1:6 cement mortar set in cement slurry. Joints between
tiling to be filled with approved grout of approved shade as per
manufacturers specifications. Rate to include cost for laying tiles to
approved pattern, design as directed by Architect, including curing, acid
wash, etc.

Quoted rate to include the cost of curing, protection with polythene

sheet and POP overlay till hand-over.

Consider basic rate of Vitirified Tile at Rs. 646/Sqm.(Excluding

tax).
Mode of Measurement : Laid area will be measured for payment.

1.06 MS FRAME WORK sqm 215.00 2,850.00

Training room & Cafeteria podium
Height - 150mm to 450mm ht
Providing & fixing frame work consisting frame work made out of 50mm
X 50mm MS Section, fixed at 600mm centre to centre. The horizontal
members to be formed out of 50mm X 50mm MS Section fixed at
ground . The top to be provided with a layer 19mm thick marine ply to
take the Carpet flooring , complete as the detail dwg and the Architects
instructions

Mode of Measurement : MS Frame Work area will be measured

for payment.
Note:Shop drawings to be submitted by vendor before
commencement of works.

1.07 GFX FLOORING OVER EXISTING SCREED sqm 451.00 3,525.00

Cafeteria/Reception/handwash/ lift lobby

3 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Supplying & applying the GFX flooring with the following specifications.

Step -01: Providing & applying Damp proofing Membrane over existing
screed concrete/Cement concrete flooring of approved make.

Step- 02: Providing & applying Epoxy primer over the Damp proofing
membrane with Quartz Sand Broad Cast layer of 1 coat.

Step- 03: Providing & applying micro Concrete GFX 3-5mm thk as per
manufactures specification.

Step-04: Providing & applying 6 layers of GFX sealer to ensure complete

stain protection as per the manufactures recommendation &
specification.

Cost to include for labour, tools, machine transportation etc

complete as per the details shown in the drawing & as per the
instructions of Engineer in Site.

Basic price of GFX flooring: Rs. 2530/Sqm, (Excluding Tax &

transportation)
Mode of Measurement : Finished Floor area will be measured for
payment.

1.08 ANTIFUNGAL VINYL CLADDING sqm 130.00 1,475.00

Medical room & sick room
Provididng and Fixing 2mm thk Antifungal vinyl roll on the Walls & floor
with approved glue on a levelled surface as per the manufacturers
specification and instructions of the Architect.

Considered Basic Price : Rs. 986/Sqm(Including Tax)

Mode of Measurement : Cladded Vinyl area will be measured for
payment. & Laid area will be measured

1.09 ANTISTATIC VINYL FLOORING sqm R/o 2,650.00

Providing & laying 2mm thick anti-static vinyl flooring over existing floor
surface to proper level, line including joint treatment, copper strips etc.,
complete as per detail drawing & Architect's instruction.

Cost to include provididng and laying Self levelling screed 3-5mm thk
under the vinyl flooring.

Basic rate rate of Antistatic Vinyl flooring at - Rs.1350 /Sq.mt

Mode of Measurement : Laid area will be measured for payment.

1.10 VINYL FLOORING sqm 17.00 2,070.00

Store room
Providing & laying 2mm thick anti-static vinyl flooring over existing floor
surface to proper level, line including joint treatment, complete as per
detail drawing & Architect's instruction.

Cost to include provididng and laying Self levelling screed 3-5mm thk
under the vinyl flooring.

Basic rate rate of Antistatic Vinyl flooring at - Rs.1076 /Sq.mt

Mode of Measurement : Laid area will be measured for payment.

4 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

1.11 EPOXY PAINT FLOORING sqm 30.00 675.00

AHU room
Providing & painting 300micron approved epoxy paint flooring of "Roff"
or "Fosroc" make over existing floor over two coats of manufacturer's
approved primer after preparing the surface as per manufacturer's
specification & guidlines. The vendor shall inspect the site before
executing the job to check if the base floor can receive the paint
flooring, complete as per instruction of the Architect's.

Cost to include provididng and laying Self levelling screed 3-5mm thk
under the Epoxy flooring.

Mode of Measurement : Laid area will be measured for payment.

1.12 ALUMINIUM SKIRTING - POWDER COATED Rmt 920.00 290.00

Providing & fixing 60mm ht. Powder Coated approved extruded
aluminium skirting fixed over masonry wall /opaque partition to proper
line & level. with approved glue, Complete as per manufacturer's
specification, installation guidlines & instructions of the Architect.
(Basic cost of the Al skirting to be considered at 315rmt
excluding tax, delivery onsite and wastage

1.13 TRANSITION STRIP Rmt 100.00 500.00

Providing and fixing Transition strip at junction of carpet and granite
floor, carpet and vitrified floor etc., , edge buffing and fixing complete.
As per the following specification.

Vitrified to Carpet & GFX to Carpet

Procarpet ALL – H: 10mm – Natural Aluminium – Code: PTAN 10
Mode of Measurement : Running Length will be measured for
payment.

1.14 CARPET TILE FLOORING - Cut pile Carpey ( Fluffy Carpet) sqm 31.00 3,800.00

Reception

Provididng & Supplying Cut pile complete as per the following

Manufacturers Specification.
Style Name: FIFTH SYMPHONY I (S)
Style Number: Q4700
Description: TWIST
Fiber Content: 100% BCF CLEARTOUCH PET POLYESTER
Face Weight: 34.1 ozs/yd2
Finished Pile Thickness: 0.700 in
Gauge: 3/16
Tufts: 8.7 per in
Primary Backing: POLYPROPYLENE
Secondary Backing: SOFTBAC PLATINUM
Total Weight: 70 ozs/yd2
Density: 1754
Twist Information: 5.15
Width: 12 ft
Number of Colors: 32

5 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Dye Method: CONTINUOUS DYED

Pattern Repeat: NONE

Flammability:
Pill Test (CPSC FF1-70): PASS
FHA DATA UM44D Certification Number: 52248
Type: I
Class: 1&2
Texture: F
Warranties:
SOFTBAC PLATINUM - 10 YEAR NO WRINKLE GUARANTEE
CLEARTOUCH WARRANTIES
CRI Certification: 15508078
Green Label Plus: GLP8078
Durability Rating: 3.50
Consider basic rate of Carpet at Rs. 2900/Sqm.(excluding tax).
Mode of Measurement : Laid area will be measured for payment.
Note: floor surface needs to be grinded if required as per site condition.

SUB TOTAL CARRIED TO SUMMARY

2.00 FALSE CEILING

2.01 GYPSUM FALSE CEILING sqm 100.00 840.00
Providing and fixing Suspended False Ceiling which includes Gypsum
Plaster board 12mm thk., False Ceiling on 24 gauge G.I. frame work
which includes Providing. & fixing G.I. perimeter channels 0.55 mm thk
20mmx30mm,web size 27mm along perimeter of ceiling, screw fixed to
brick wall/partition with nylon sleeves & screws @ approx 2'0" c/c.
Suspending G.I. intermediate channels size 45 mm,0.9 mm thk, flanges
of size15mm each from the soffit 1220mm c/c with ceiling angle 25
x10mm x 0.55mm thk fixed to soffit G.I. cleat & steel expansion
fasteners.

Ceiling section of 0.55mm thk having web of 51.5mm & flanges 26 mm

each lips 10.5 mm fixed to intermediate channel with connecting clips
& perpendicular to int channel @ 457mm c/c.12.5 mm tapered edge
Plaster board ( IS 2095-1982 ) screw fixed to ceiling section with 25mm
dry wall screws @ 230 mm c/c. Boards to be joint & finished so as to
have flush look including filling finishing edges with jointing compound
paper tape/cloth gauze & 2 coats of primer suitable for plaster board.
Rate to include M.S.framing around A/C ducts where ever necessary.

6 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Rate to include cove to profile, cut-outs for light fixtures, spot lights,
smoke detectors, Pelmets, Vertical risers as shown in dwg. and all
services cut outs as required. complete as directed by Project manager /
Architect.
Note: for Light fittings, Grills, diffusers and other cut-outs have to be
made with a frame of perimeter channels of size 20mm x 27mm x
30mmx 0.55mm thk, supported suitably. Quoted rate shall also to
include the Engineered system made up of primary sections in
galvanized steel of 21x35x3600mm in 0.75 bmt gauge. with top cross
rails and the system shall be used at 1200mm apart where direct
suspenders cannot be used due to over head ducting or any other
services.

Mode of measurement : Finished plan ceiling area shall be

measured for payment.

2.02 PLANK CEILING sqm 180.00 1,875.00

Providing &Installating Commercial type suspended modular ceiling
consisting of

General requisites :
GRIDS : The Main runners & 'C' Channels
Tile Specification :
Tile Type : Lay - in ceiling type
300 x 1200 x 19mm thickness, Micro-Perforated Mineral Fibre Tile.
Edge detail : GNSK
Light Relectance : Upto 90%
Humidity Relectance : Upto 95%
Colour : White similar to RAL 9010
Surface Burning characteristics : Class 0 BS 476: part7:1987
Class B1 as per DIN 4102 part 1
thermal Conductivity :0.052 - 0.057 W/mK
NRC : 0.70
thickness / Weight : 5.7Kg/sqm
Smoke Developed = 0 & Flame Spread = 5.
Tile Texture : Sand Textured
Ceiling Suspension System
Proprietary supplied ceiling suspension system to consist of 2mm or
3mm GI suspension rod/wire with adjustable adjustable threaded "J" bolt
of 3mm dia securely affixed to structural ceiling using soffit angle fixing
bracket and 10mm dia hook type anchor fastener. Ceiling suspension
system to be fixed at interval (grid) of 1200mm .

Proprietary supplied Grid System to consist of Main Runners @300mm

and joined by Cross Tees @ 300mm to form overall grid opening of
300mm x 1200mm. Additional cross tees are to be placed where
appropriate for light fixtures, AC diffusers.

The grid system used shall be hot dipped galvanized steel sections, with
exposed surfaces chemically cleaned and capped prefinished in high -
gloss polyester enamel with two coat system on cold rolled steel.

7 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Grid member sizes

Main runners : 15mm X 38mm X 0.45mm
Cross tees : 15mm X 38mm X 0.45mm
Perimeter section : 19mm X 19mm X 0.45mm
False ceiling will be measured on horizontal plane only. Horizontal plane
measurements are to be inclusive of all vertical drops, edge moldings,
fascias, etc.

All extra tiles occupied by lights and diffusers to be returned to Owner.

Rate quoted to include all cut-outs required for light fixtures, smoke
detectors and other services cut-outs complete as directed by Architect.

2.03 MODULAR GRID CEILING sqm 86.00 1,070.00

Providing & installing Commercial type suspended modular
ceiling consisting of
General requisites
Grids width: 15mm Silhouette with black revel finished in approved
shade. The main Runners & cross Tees to have "stab" installation system
made of corrosion-protected high tensile steel OR approved equivalent.

Tile specification :
Tile type: Lay-in ceiling type
Tile size: 600mm X 600mm X 15mm thk.
Edge detail: Microlook Edge
Light reflectance: up to 0.84 ( 84% )
Humidity resistance: 99% RH
Color: White similar to RAL 9010
Surface burning characters: Class1, BS 476:Part 7:1987
Smoke Developed: 0 & Flame Spread = 5 as per UL
Thermal conductivity: 0.052 - .057 W/mk
NRC: 0.55 / 0.60
Thikness/Weight : 4.5 Kg/m2
CAC: 34 dB
Surface Pattern : Plain with random perforations
Ceiling Suspension System
Proprietary supplied ceiling suspension system to consist of 2mm or
3mm GI suspension rod/wire with adjustable adjustable threaded "J" bolt
of 3mm dia securely affixed to structural ceiling using soffit angle fixing
bracket and 10mm dia hook type anchor fastener. Ceiling suspension
system to be fixed at interval (grid) of 1200mm in both directions.

Proprietary supplied Grid System to consist of Main Runners @ 600mm

and joined by Cross Tees @ 600mm to form overall grid opening of
600mm x 600mm. Additional cross tees are to be placed where
appropriate for light fixtures, AC diffusers.

8 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

The grid system used shall be hot dipped galvanized steel sections, with
exposed surfaces chemically cleaned and capped prefinished in high -
gloss polyester enamel with two coat system on cold rolled steel.

Grid member sizes

Main runners : 15mm X 40mm X 0.38mm
Cross tees : 15mm X 40mm X 0.38mm
Perimeter section : 14mm X 20mm X 0.43mm
False ceiling will be measured on horizontal plane only. Horizontal plane
measurements are to be inclusive of all vertical drops, edge moldings,
fascias, etc.

All extra tiles occupied by lights and diffusers to be returned to Owner.

Rate quoted to include all cut-outs required for light fixtures, smoke
detectors and other services cut-outs complete as directed by Architect.

2.04 METAL PERFORATED LOOP CEILING sqm 415.00 6,908.00

LD SQUARE LOOP CEILING : Providing & fixing of loop ceiling made up
of 1.2mm aluminium sheet of size 600x1200mm ,sizes can be
customized as per the requirement with hole dia of size 63mm and with
embosing diameter of 75mm. The tile would be provided with
CHROMANTING finish of any color of thickness 70-80 microns. The tile
would be hung to the the true ceiing by using U type mainchannel made
upo of 0.8mm gi section and slotted channle made of 0.8mm gi section
and this two carroer to tob hung to true ceiling by using M6 Hiltimake
anchorfastner , nut and washer a

Supply Of LDSquare Make Metal Axiom having 1.2mm thickness, with

50 mm Height & 20mm bottom width of 'C' Section(20-50-20 of 'C'
Section) & Wall thickness of 1.2mm Supported with all Necessary
Accessories. Chromanting finish of code 101 M.

Consider Basic cost of ceiling at Rs. 5600/sqm including

instalation
Mode of measurement : ceiling plan area shall be measured for
payment.

2.05 PLAIN METAL GRID CEILING Sqm 25.00 2,070.00

Potwash/cutlery store/food holding area/tuck shop/ bainemarie

Supply of Metal False Ceiling tiles of 0.6mm thick GI sheets

585mmx585mm size manufactured out of precoated hot dipped GI with
0.1 NRC, with a finish powder coated tile are formed in the silhouette
grid with black Rivel to complete the job.Powder Coating Colour:-Black,
Installation is done with Butterfly clip, Suspension wire & all necessary
accessories.

Consider Basic cost at 1479/sqm Including Taxes

Mode of measurement : Finished plan ceiling area shall be
measured for payment.

9 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

2.06 ROUND ACCOUSTICAL CEILING

1200mm Dia Nos 38.00 12,300.00
900mm Dia Nos 106.00 12,300.00
Providing & fixing the circular accoustical ceiling as per the
following specs. SUPPLY OF AMF TOPIQ ELEMENT, HUMIDITY
RESISTANCE = UPTO 95% RH, FORM/SIZE = CIRCULAR

TOPIQ Element :
• Single layer mineral wool soft acoustic board. Third party certified bio-
soluble bio-degradable mineral wool.
• Total thickness 40mm
• Surface texture : Fleece coat on all sides
• Shape : Circular
• Floating effect due to set-back fixing points
Mineral wool acoustic panel:
• Soft mineral wool acoustic panel. Third party certified bio-soluble bio-
degradable mineral wool.
• Fire protection class according to DIN EN 13501-1: A2-s1, d0
• Sound absorption: EN ISO 354
• Humidity resistance: up to 95% relative humidity

• Sizes:Circular - 1200 mm/900 diameter, single piece/frameless joint-

free
• Thickness / Weight: 40 mm/(approx. 5,6 kg/m²)
• Edge Detail: straight edge
• Building biology recommended
• FSC certified
• Color white, RAL Code 9010
Fastening and guide (ceiling) profile
The panels to be suspended individually using the AMF hanger kit, Hilti
Plugs, aircraft suspension cables 1m long and bottom end cable
adjusters. Installation shall be done as per manufacturer’s instructions.
Shop drawings must clearly indicate the panel pattern and the method
of fixation according to the specifications and the technical installation
guidelines of the manufacturer

Basic Price of the Board: 9950/No( including installation)

Mode of measurement: Installed ceiling/board per piece.

2.07 HERA DESIGN WOOD WOOL BOARD CEILING - TRIANGULAR Nos 40.00 12,000.00
SPECIFICATIONS FOR NRC =1.00 with 2000 x 600 x 25mm
thickness Triangular Suspended Heradesign tiles :

10 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Providing & fixing of Heradesign - fine plus - 600mm x 2000mm 2-layer

acoustic panel as a composite product consisting of mineral wool
absorber with trickle protection system. The Triangular Panels will be
placed and fixed with each other as per the Architects design and
specifications. The Triangular Panels will be acutaely cut with the
requited machinery specialised and approved from AMF HeraDesign
Team to have the warranties in place. The Hera Design Triangular panels
have to be crafted and fixed and suspended with AMF certified
suspension system from Germany.

Specification :
TCH ( Totoal construction height) - 25mm
Size: 1200 * 600 * 25mm thickness
Back Filling 40 MM mineral wool : Type: DP-5 ( Gross density = 50 kg/m3 )
Light Reflectance : upto 90%.
Humidity Resistance : 95%.
Colour : As
Reaction to fire acc to EN 13501-1: B-s1,d 0
Sound absorption value: NRC upto to 1.00
Thickness/Weight : 11.3 Kg/m2
Tile Name : HERADESIGN SUPERFINE SPECIAL TRI-ANG-LE Series
Basic Price of the Board: 9750/No( including installation)
Mode of measurement: Installed ceiling/board per piece.

2.08 STRETCH FABRIC FALSECEILING Sqm 9.00 18,300.00

Bainemarie portal
Providing and Fixing Custom made PVC Stretch false ceiling to fit exact
dimensions with aluminium supports. The PVCc ceiling must be
stretched and hooked into aluminium rails. Stretch aluminum rails
insuring good rigidity, to be fixed to ther walls or other supports at the
specified level. A properitory semi rigid PVC hook ( for Tension mounding
) is welded on the out line of the PVC ceiling.

Following are the Technical Specification :

Thickness : 0.18mm
Dimensional Stability : -5 deg to +45 deg C ( No visisble
deformation)
Weight : (200 +_ 15 ) g / sqm
Water Vapor permeability : For Hydrometric degree < 65% RH =
0.0030 g / hr sqm mm Hg

For Hydrometric degree < 65% RH = 0.0045 g / hr sqm mm Hg

Very effective impermeable barrier to water
Water proof / Dust Proof / Airtight
Resistant to water , dampness, sea water, copper salt solutions and x-
rays

Resistant to 15% concentrated suiphuric acid

Warranty : 15 years coverignt the material, the manufacturing and
installation aspects.

Note: Rate to include for LED Light fixtures as per the architects
selection & manufactures recommendation.

11 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Consider the basic rate of 14800.5/Sqm (Including Light Fixtures

as per the manufactures recommendation & excluding taxes)

SUB TOTAL CARRIED TO SUMMARY

3.00 PARTITION
3.01 ALUMINIUM PARTITION sqm 10.00 987.00
Fabricating and fixing partition frame work consisting of 50mm x 25mm
x 1.2mm (with 0.581Kgs / Rmt as per IS Standards of Jindal or
equivalent make) thick extruded aluminum box section framework at
spacing not exceeding 600mm both ways (horizontal and vertical).
Framework formed using 50mm x 25mm x 1.2mm thick extruded
aluminum box section connected using 50mm X 25mm X 1.2mm thick
"L" angle support cleats fixed with 12mm galvanized metal screws.
Partition framework to be secured to floor, structural support and
nearest structural member using galvanized metal screws and wooden
dowels.

Contractor to make provision for all electrical, networking boxes which

shall be installed on 25mm x 25mm x 1.2mm thick extruded aluminum
"L" angle screwed onto partition framework at required heights/levels as
directed.

Mode of measurement : Length & height ( up to true celing )

shall be measured for payment.
Note : All back boxes to be framed with ply packing as per
architecht PMC instruction at site,All services entry
(duct,lecetrical trays,conduits) to be framed around seperately
as per Architect PMC instruction at site.

3.02 G.I FRAME WORK sqm 425.00 600.00

Providing & Fixing Gypsteel ULTRA stud partition of 48 mm Gypsteel
ULTRA C Stud (0.5 mm thick having one flange of 34 mm and another
flange of 36mm made of GI Steel) placed at 610 mm Centre to Centre in
50 mm Gypsteel ULTRA Floor and ceiling Channel (0.5 mm thick have
equal flanges of 32 mm made of GI steel), which is anchored to the floor
and ceiling using suitable anchor fasteners at 600 c/c in center line.
Stud and floor channel are crimped together using crimping tool. The
boards are to be fixed vertically to the framework with joints staggered
to avoid leakage through joints. A Gypsteel ULTRA Noggin channel of 48
mm width (0.5 mm thick having two flanges of 40 mm each) has to be
provided at the horizontal joints of the two boards screw fixed to the
studs using Gyproc metal to metal flat head screws . The Junction of the
partition with masonry and all penetration through the partition has to
be treated with a fire and acoustic sealant.

Contractor to make provision for all electrical, networking boxes which

shall be installed on 25mm x 25mm x 1.2mm thick extruded aluminum
"L" angle screwed onto partition framework at required heights/levels as
directed.

12 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Mode of measurement : Length & height ( up to true celing )

shall be measured for payment.
Note : All back boxes to be framed with ply packing as per
architecht PMC instruction at site,All services entry
(duct,lecetrical trays,conduits) to be framed around seperately
as per Architect PMC instruction at site.

3.03 12mm THICK MDF SKINNING sqm 610.00 600.00

Providing & fixing 12mm thick MDF skinning on existing aluminum
frame work using 19mm screws at every 300mm center to center. The
Ply skinning is finished using approved metal putty & primer as per
detail dwg.

Mode of measurement : Length & height shall be measured for

payment.

3.04 6mm THICK MDF SKINNING sqm 5.00 515.00

Providing & fixing 6mm thick MDF skinning on existing aluminum frame
work using 19mm screws at every 300mm center to center. The Ply
skinning is finished using approved metal putty & primer as per detail
dwg.

Mode of measurement : Length & height shall be measured for

payment.

3.05 12.5mm THICK GYPSUM SKINNING. sqm 1,600.00 350.00

Providing & fixing 12.5mm thick taper edge gypsum skinning on existing
aluminum frame work using propriety supplied screws at every 300mm
center to center. The gypsum skinning is finished using proprietary
supplied jointing tape & jointing compound as per manufacturer's
specification.

Quoted rate shall include providing 12mm X 25mm Aluminum L-Angle &
grooves where ever necessary as per detail dwg.

Mode of measurement : Length & height shall be measured for

payment.
Note : Joints of First skin gypsum also to be finished.

3.06 CURVED GYPSUM SKINNING sqm 35.00 435.00

Providing & fixing 12.5mm thick tapered edge gypsum skinning for
curved partitions on existing partition frame work using proprietary
supplied screws at every 600mm center to center. The gypsum skinning
to be finished using proprietary supplied jointing tape & jointing
compound as per manufacturer's specification.

Mode of measurement : Length & height shall be measured for

payment.
Note : Joints of First skin gypsum also to be finished.

3.07 ROCK WOOL INSULATION sqm 435.00 200.00

13 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Providing & fixing 50mm thick Rock wool insulation having a density of
48Kg/CMT for opaque partitions as per detail dwg. Cost to include RP
Tissue wrapping .

Mode of measurement : Length & height shall be measured for

payment.
Note : Sizing to be done neatly as per the frame grid size
without any gap and needs to be tapped neatly (RP tissue to
wrapped on all sides of rock wool without any gaps).

3.08 VENEER PANELLING sqm R/o 4,516.00

Providing & fixing veneer paneling Horizontal Grains , 1000mm wide
panels formed out of 4mm thick approved veneer fixed over existing
12mm thick commercial ply finished in melamine polish, with SS strips
of 6mm, complete as per instruction of the Architect's.

Mode of measurement : Length & height up to False ceiling shall

be measured for payment.
Consider Basic cost of Veneer @ Rs. 1600/sqm
Note : Factory Finished & Polished with Clip on System will be
preferred.
finishing the joints or grooves at site may differ from the
factory finish polish.

3.09 LAMINATE PANELLING sqm 53.00 1,230.00

Providing & fixing laminate paneling formed out of 1mm thick approved
laminate with 4mm thk MDF Backing fixed over existing 12mm thick
commercial ply , complete as per instruction of the Architect's.

Cost to include provididng and fixing 5mm Aluminium "U"Channel in

Vertical position as per the drawing and instructions of the Architect

Mode of measurement : Length & height up to False ceiling shall

be measured for payment.
Note : Factory Finished with Clip on System will be preferred.
Consider Basic cost of Laminate @ Rs. 400/sqm

3.10 LACQURED GLASS PANELLING- Ty-01 sqm 171.00 3,875.00

Providing & fabricating Glass panelling formed using 6mm thick
Lacqured glass with existing GI Frame work & 12mm thk MDF backing
fixed using 3M tape etc complete as per the detailed dwg or the
instructions of the Architects.

Consider 2 - 4 mm gap between each glass panels with aluminium "T"

section

Consider Basic cost of Lacqured Glass @ Rs. 3700/sqm

Mode of Measurement : Cladded Glass area will be measured for
payment.

3.11 LACQURED GLASS PANELLING- Ty-02 sqm 4.00 5,470.00

Collab-04 & Main pantry

14 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Providing & fabricating Glass panelling formed using 6mm thick

Lacqured glass with 12mm thk MDF backing & lacquered glass shall
have 20mm thk aluminium frame alround the lacquered glass powder
coated to 60microns in Black shade, the provision for hook shall be
made in lacquered glass etc complete as per the detailed dwg or the
instructions of the Architects.

Consider Basic cost of Lacqured Glass @ Rs. 3700/sqm

Mode of Measurement : Cladded Glass area will be measured for
payment.

3.12 FABRIC PANELLING sqm 80.00 3,200.00

Providing and fixing fabric Panel over existing partition / wall with
10mm Anutone Strand Accoustic Board wrapped with approved Fabric
with 3-4mm foam onto the softboard with required adhesives and
tucking of fabrics without any undulations gripper make Inter
Dimensions or Equivalent. All exposed Area of profile to be retucked
with fabrics .. Fabric shall be Treated with squash guard as per the
manufactures recommendation. etc complete as per the details shown
inthe drawing.

Consider Basic rate of Fabric as Rs. 450.00 /mtr.

Consider Basic rate of Accoustic Board as Rs. 1350.00 / sqm
Mode of Measurement : Cladded Fabric area will be measured
for payment.

3.13 ACCOUSTICAL WOODEN PANELLING - TRAINING ROOM sqm 55.00 3,540.00

Providing and Fixing Armstrong Channelled Woodworks perforated
panels of width 128mm, thickness of 15mm and length 2440 mm or as
required by the Architect/ approving engineer, made of a high density
fibre board with minimum 830 Kg/M3 density substrate with a laminated
facing / wood veneer as per the approved shade/ species & finish and a
melamine balancing layer on the reverse side. The boards shall have a
special perforation pattern where the visible surface has a “Helmholtz”
fluted perforation of 2mm width and 14mm of visible panel each. The
panels shall provide a fire reaction of Class of 1 as per Part 7 of BS 476.
The edges of the panels shall be “tongue-and-grooved” to receive
special clips for installation. The back of the perforated panel shall have
sound absorbing non-woven acoustical fleece having NRC of 0.55. The
panels shall be mounted on special aluminium splines using clips
provided by Armstrong and approved by the Architect/ Engineer-in-
Charge.

15 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Install wooden battens (provided by others) of section 50mmx50mm or

as approved by the Architect on the solid wall horizontally using screws
and plugs at spacing of 600mm centre-tocentre. Screw the aluminium
extruded keel for channelled woodworks (GTPT001) provided by
Armstrong over the lowest and second wooden batten at an on-centre
distance of 600mm. Install the first set of wooden panels by inserting
the clips for border channelled woodworks (GTPT002) and insert the
groove of the panel into the projecting flange of the aluminium clip.
Continue installing rows of panels by inserting the tongue into the
groove of the earlier inserted panel and progressively installing clips for
inside channelled woodworks (GTPT003) into the next keel till the actual
height is achieved. Use clips for border channelled woodworks
(GTPT002) to finish off the installation. Finish off the edges using
wooden moulding of matching colour (provided by others).

Basic Price of panelling: Rs.4338/Sqm (including installation)

Mode of Measurement : Cladded Panelling area will be
measured for payment.

3.14 PACKING WOOD PANELLING sqm 60.00 2,735.00

Reception & Cafeteria
Providing & fixing the Packing wood panelling using packing wood of
size 60mm x 20mm thk at every 20mm c/c with existing 12mm thk
MDF backing using propreitary screws & packing wood shall be
melamine polished of approved make etc complete as per the details
shown in the drawing.

Consider Basic rate of Packing wood as Rs. 65 /kg.

Mode of Measurement : Cladded tile area will be measured for
payment.

3.15 PICCOLO TILE CLADDING sqm 55.00 3,445.00

Providing & fixing 50 x 50 mm Piccolo tile dado of approved make &
colour fixed over masonry/partition using solid bed of BALCEM (Polymer
modified cementations adhesive) & BAL ADMIX AD1 (Polymer modified
liquid). Joints between tiling to be filled with approved grout of approved
shade as per manufacturers specifications.

Consider Basic rate of Piccolo Tile as Rs. 1862 /sqm.

Mode of Measurement : Cladded tile area will be measured for
payment.

3.16 RECEPTION BACKDROP Sqm 16.00 27,400.00

16 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Providing , Fabricating & fixing the Reception back drop using Solid
acrylic surface to a hieght of 1800mm. The MS frame work of MS box
section 30 x30mm Horizontally & vertically @ every 600mm c/c shall be
fixed to the floor using anchor fastners & base plate. The 2 layers of the
Solid acrylic surface of 6mm thk shall be fixed to the MS frame work the
first layer shall have a CNC router cut. The back of the unit shall be
cladded with 12mm thk MDF & finished with approved duco finish etc
complete as per the details shown in the drawing.

All MS sections shallbe treated with primer & 2 coats of enamel paint

Consider basic Price of SAS Rs. 6500/sqm (excluding taxes)

Consider basic Price of duco Rs. 1320/sqm (excluding taxes)
Mode of Measurement : Cladded area will be measured for
payment.
3.17 WALL OF FAME Sqm 9.50 31,900.00
Providing , Fabricating & fixing the wall of fame using Solid acrylic
surface to a hieght of 2700mm. The MS frame work of MS box section
30 x30mm Horizontally & vertically @ every 600mm c/c shall be fixed to
the floor using anchor fastners & base plate. The transluscent Solid
acrylic surface of 6mm thk shall be fixed to the MS frame work with
12mm thk router cut MDF backing. The back of the unit shall be cladded
with 12mm thk MDF & finished with approved laminate etc complete as
per the details shown in the drawing. The top the Unit shall be cladded
with 1.2mm thk Stainless steel of 304 grade as a cap to access for
lights & cleaning.

All mS sections shallbe treated with primer & 2 coats of enamel paint.
The Provision of strip lighting shall be made as per the architect
requirement.

Consider basic Price of Translucent SAS Rs. 16146/sqm

(excluding taxes)
Mode of Measurement : Cladded area will be measured for
payment.
3.18 GREEN WALL CLADDING sqm 37.00 16,850.00
Supply of Natura Green Wall modules of Size 700mm x 500mm
fabricated with Coir hard board of 6mm thickness with a filling cavity of
30 mm of sufficient quantity to cover the required area. Modules to be
filled with Natura Super Absorbent Polymer Substrate. Face of the
Module to have 61 mechanically drilled holes of 35 mm Dia. Plants to be
pre-selected as per site conditions, planted on the individual modules
and nurtured for a period of 45-90 days. Back of the module to be fitted
with 4 Aluminum Hooks sufficient to install on 35mm GI channels fitted
onto the wall or to be installed on a pre-fabricated MS frame. 16 mm
irrigation pipes fitted with drippers and automated using a battery
based timer to be installed for the purpose of irrigation. Basic PVC Drain
to be fitted at the bottom for collection of excess water if any.

17 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Lighting: For indoor areas/ areas with insufficient natural light, LED
Lights to be installed to cover the required area.
Light Specification:
40 W LED, 3000-4000 LUX, Track, Adjustable Dome, Throw Angle Min
120 Degrees.
Maintenance Contract:
Basic Service: Covers Trimming, Weeding & Servicing of Electro-
Mechanical Items.
20% Plant Replacement – (Recommended) includes all of Basic
Services.
100% Plant Replacement – includes all of Basic Services.
Water inlet, amenities and accessibility to be provided at site to
maintain the Green Wall Area

Provision of outlet shall be as per the manufactures recommendation/

FRP container.

Consider Basic Rate of Green Wall as Rs. 15610 /sqmtr.

Mode of Measurement : Green Wall area will be measured for
payment.
Note:Shop drawings to be provided by vendor with all provision
details.(supply ,drain water line with valves and floor grating )

3.19 EXPOSED BRICK CLADDING Cum 21.00 8,200.00

Providing & constructing the Brick using 230mm x 110mm x 76mm
thick Class A Table moulded bricks of approved make with Compressive
strength of 35Kg/sqm using 1:4 CM(1 part of Cement & 4 Part of sand).
Rate to include for pointing 8-10mm , scafolding, raking out joints
staging at all lifts & leads at all levels etc complete as per the details in
the drawings and instructions of the Architect. Rate to include for
pointing where ever specified.

The exposed brick cladding shall be treated with a PU coat of approved

shade & make as per the manufactures recommendation & architects
Instructions.

Consider Basic Price of brick. Rs. 6.00/no

Mode of measurement : constructed wall area shallbe
measured.

3.20 GI PIPES Sqm 90.00 8,675.00

Providing, Fabricating & fixing the GI pipes over Brick masonary wall,
The GI hollow pipes shall be of size 3/4", 1", 1 1/4', 1 1/2" (20mm ,
25mm , 32mm, 40mm ) of Medium guage @ every 20mm gap b/w two
pipes , powder coated to approved microns over a coat of primer, Fixed
to the wall using anchors/screws etc complete as per the details shown
in the dawing. Rate to include for U clip powder coated as per the
architects instruction.

Mode of mesurement : cladded area shallbe measureed in

Length & height.

3.21 COLUMN PANELLING-2 Face LACQUERED GLASS+ CEMENT sqm 73.00 3,735.00
FINISH- C1

18 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Providing and fixing Column paneling using 50mm x25mm tk GI frame

work at spacing not exceeding 600mm bothways cladded with12mm
thk Gypsum Board using proprietary supplied screws at every 300mm
center to center. The gypsum skinning to be finished using proprietary
supplied jointing tape & jointing compound as per manufacturer's
specification.. From FFl to false cieling ,complete as per detailed
drawing and directions of the Architect's. The two faces of the Column
Shall be cladded with 6mmthk lacquered glass to a height of 1200mm
over 12mm thk MDF backing. Rest of the column shall be Cement finish
paint of approved shade & make.

Note: The Lacquered shall be flushed in one line with gypsum skinning.

Cost to include fixing 25mm x25mm Aluminium "L" Channel to the

edges of the column as per the detailed drawing and instructions of the
Architect.
Cost to include provididng and fixing 5mm Aluminium "U"Channel in
Vertical/Horizontal position as per the drawing and instructions of the
Architect

Consider Basic cost of Lacqured Glass @ Rs. 3700/sqm

Consider Basic cost of Cement paint @ Rs.1615/sqm
Make Considered: Green Heart-GFX/Armour Coat/Shivani
fashions-cameleo

Mode of measurement : Length & height upto False ceiling shall

be measured for payment.

3.22 COLUMN PANELLING-2 Face LACQUERED GLASS+ CEMENT sqm 73.00 3,920.00
FINISH- C1a

Providing and fixing Column paneling using 50mm x25mm tk GI frame

work at spacing not exceeding 600mm bothways cladded with12mm
thk Gypsum Board using proprietary supplied screws at every 300mm
center to center. The gypsum skinning to be finished using proprietary
supplied jointing tape & jointing compound as per manufacturer's
specification.. From FFl to false cieling ,complete as per detailed
drawing and directions of the Architect's. The two faces of the Column
Shall be cladded with 6mmthk lacquered glass to a height of 1200mm
over 12mm thk MDF backing. Rest of the column shall be Cement finish
paint of approved shade & make.

The one faces (Drain water pipe) of the column shall be Packed
with 12mm thk Bison Board and cladded with gypsum skinning
& finished with Cement finish paint as per the details shown in
the drawing.

Note: The Lacquered shall be flushed in one line with gypsum skinning.

Cost to include fixing 25mm x25mm Aluminium "L" Channel to the

edges of the column as per the detailed drawing and instructions of the
Architect.
Cost to include provididng and fixing 5mm Aluminium "U"Channel in
Vertical/Horizontal position as per the drawing and instructions of the
Architect

19 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Consider Basic cost of Lacqured Glass @ Rs. 3700/sqm

Consider Basic cost of Cement paint @ Rs.1615/sqm
Make Considered: Green Heart-GFX/Armour Coat/Shivani
fashions-cameleo

Mode of measurement : Length & height upto False ceiling shall

be measured for payment.

3.23 COLUMN PANELLING -CIRCULAR CEMENT FINISH+ VINYL sqm 115.00 3,465.00
GRAPHICS-C2

Providing and fixing Column paneling using 50mm x25mm tk GI frame

work at spacing not exceeding 600mm bothways cladded with12.5mm
thick tapered edge gypsum skinning for circular column on frame work
using proprietary supplied screws at every 600mm center to center. The
gypsum skinning to be finished using proprietary supplied jointing tape
& jointing compound as per manufacturer's specification... From FFl to
false cieling ,complete as per detailed drawing and directions of the
Architect's. The column shall be Cement finish paint of approved shade
& make. The Two faces of the column toa 1200mm ht finished with vinyl
graphics of approved design & pattern

Cost to include provididng and fixing 5mm Aluminium "U"Channel in

Vertical/Horizontal position as per the drawing and instructions of the
Architect

Consider Basic cost of Cement paint @ Rs. 1615/sqm (excluding

taxes)
Consider Basic cost of Vinyl Graphics @ Rs. 2045/sqm (excluding
taxes)
Make Considered: Green Heart-GFX/Armour Coat/Shivani
fashions-cameleo

Mode of measurement : Length & height upto False ceiling shall

be measured for payment.
Note:Vinyl graphic surface to be finished with putty & primer as per
graphic vendor/Architecht instruction.

3.24 COLUMN PANELLING - CEMENT FINISH -C3 sqm 118.00 3,200.00

Providing and fixing Column paneling using 50mm x25mm tk GI frame

work at spacing not exceeding 600mm bothways cladded with12
gypsum skinning for rectangular column on frame work using
proprietary supplied screws at every 600mm center to center. The
gypsum skinning to be finished using proprietary supplied jointing tape
& jointing compound as per manufacturer's specification... From FFl to
false cieling ,complete as per detailed drawing and directions of the
Architect's. The column shall be Cement finish paint of approved shade
& make.

Cost to include provididng and fixing 5mm Aluminium "U"Channel in

Vertical/Horizontal position as per the drawing and instructions of the
Architect

20 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Cost to include fixing 25mm x25mm Aluminium "L" Channel to the

edges of the column as per the detailed drawing and instructions of the
Architect.
Consider Basic cost of Cement paint @ Rs. 1615/sqm (excluding
taxes)
Make Considered: Green Heart-GFX/Armour Coat/Shivani
fashions-cameleo

Mode of measurement : Length & height upto False ceiling shall

be measured for payment.

3.25 COLUMN PANELLING - BRICK CLADDING-C4 sqm 110.00 1,260.00

cafeteria
Providing & constructing the Brick using 230mm x 110mm x 76mm
thick Class A Table moulded bricks of approved make with Compressive
strength of 35Kg/sqm using 1:4 CM(1 part of Cement & 4 Part of sand).
Rate to include for pointing 8-10mm , scafolding, raking out joints
staging at all lifts & leads at all levels etc complete as per the details in
the drawings and instructions of the Architect. Rate to include for
pointing where ever specified.

Consider basic Price OF bric. Rs. 6/no

Mode of measurement : constructed wall area shallbe
measured.
3.26 COLUMN PANELLING- ANTIFUNGAL VINYL - C5 sqm 11.00 2,800.00
Medical Room

Providing and fixing Column paneling using 50mm x25mm tk GI frame

work at spacing not exceeding 600mm bothways cladded with12mm
thk Gypsum Board using proprietary supplied screws at every 300mm
center to center. The gypsum skinning to be finished using proprietary
supplied jointing tape & jointing compound as per manufacturer's
specification.. From FFl to false cieling ,complete as per detailed
drawing and directions of the Architect's.

All Faces of the column shall be finished with approved Antifungal vinyl
graphics of approved make using adhesive etc complete as per the
manufactures recommendation & as per the details shown in the
drawing.

Cost to include fixing 25mm x25mm Aluminium "L" Channel to the

edges of the column as per the detailed drawing and instructions of the
Architect.
Considered Basic Price : Rs. 986/Sqm (Including Tax)
Mode of measurement : Length & height upto False ceiling shall
be measured for payment.

3.27 COLUMN PANELLING - VITRIFIED TILE -C6 sqm 15.00 1,775.00

Potwash

21 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Providing and laying vitrified tile Dadooing 600 x 600mm with 3mm
Spacers over 1:6 cement mortar set in cement slurry. Joints between
tiling to be filled with approved grout of approved shade as per
manufacturers specifications. Rate to include cost for laying tiles to
approved pattern, design as directed by Architect, including curing, acid
wash, etc.

Quoted rate to include the cost of curing, protection with polythene

sheet and POP overlay till hand-over.

Consider basic rate of Vitirified Tile at Rs. 915/Sqm.(Excluding

tax).
Mode of Measurement : Laid area will be measured for payment.

SUB TOTAL CARRIED TO SUMMARY

4.00 DOORS
4.01 FIRE DOOR
2HR. FIRE RATED DOOR
UPS/Battery/Server room/Electrical room
Opening size: - FD1 - 1200mm X 2500mm (With vision panel of nos 3.00 44,300.00
wired glass of 10mm thk)
Opening size: - FD2 - 1000mm X 2500mm (With vision panel of nos 1.00 39,400.00
wired glass of 10mm thk)
Providing and fixing in position Fire Rated Metal door with pressed steel
frame and shutter as per manufacturer’s details and as mentioned in
the drawings including fixing ironmongery etc of MPP System Schroders
make. This includes providing and fixing brush steel finished iron
mongery like Ball bearing Hinges, Mortise Locks, Dorma Handles, Push
Plates, Bolts, Door Closer, panic bar etc. (Dorma make) as indicated in
the detail drawings and all surfaces of doors shall be finished with 2
coats of Fire rating paint over a coat of primer to achieve the fire rating
as indicated in the detail drawings.

The door finished Fire retardant polish, steel pressed shutter with 2 Hour
Fire rating of Single Shutter and vision panel with Dorma Panicbar.
Complete as per design and instructions of the Architects.

Complete as per instruction of the Architect's

4.02 ELECTRICAL DB SHAFT DOOR sqm 20.00 5,010.00

Providing & fabricating Electrical DB doors.
Shutter: The shutter of the Electrical door to be formed out of 25mm
thick MDF , to be fixed with 12 x 12mm Square MDF Beading Slats to be
finished with approved Duco Paint. Complete as per the Detailed Dwg
and instructions of the Architect.

Frame: The frame to be formed out of 50mm X 50mm approved timber

finished in approved automotive paint supported with 50mm X 50mm
timber frame work from true ceiling.

22 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Hardware: Approved Soft Closing hinges of approved make, 1no. Dead

lock of approved make each shutter, tower bolt of approved make.

4.03 SINGLE LEAF SINGLE SWING FLUSH DOOR- WITH WOODEN

FRAME & VISION PANEL
a) Opening size: 1400mm X 2500mm -Emergency gas Nos 1.00 37,500.00
Frame section : 50mm X 75mm
Shutter : Fabricating & fixing single leaf single swing flush door 35mm
thk of apporved make, finished with 1mm thick laminate of approved
make & colour on both sides. The shutter shall have 8mm thk
Toughened glass. The shutter edges shall be lipped in 8mm thick
approved timber beading melamine polished.

Hardware : Hinges, Handle Mortise lock, of aproved make, one no floor

mounted SS door stopper etc as per the approved makes & architects
information.

Frame : Frame should be formed out of 50mm X 75mm approved

timber melamine polished with 38mm wide x 12mm deep rebate.

Fixing of Frame : Frame should be fixed to masonry wall using M.S

holdfast / for partitions using wooden screws with clear anti-termite
treatment for the conceled portion frame.

SUB TOTAL CARRIED TO SUMMARY

5.00 LOOSE FURNITURE

5.01 STORAGE sqm 5.00 8,850.00
BMS room
Fabrication:
Providing & fabricating storage 600mm deep formed out of 19mm thick
MDF finished in 1mm thick approved laminate consisting of storage with
shutter, & 1mm thick approved laminate inside. The shutter of the
storage shall be formed out of 19mm thick MDF finished in 1mm thick
approved laminate on the external side. with 1mm thick approved
laminate on the inside mounted over spring loaded auto closing hinges
of approved make, tower bolt. The Strogae to accomodate Shelf made
of 19mm thk MDF finished with approved laminate as per the dwg .The
exposed edges of the storage shall be lipped using approved timber
beading formed to shape melamine polished, complete as per detail
dwg. & Architects instruction.

23 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Storage to be complete with hardware installed as directed to consist of

the following. Shutter to have Soft-closing spring loaded hinge of
approved make installed strictly as per manufacturers guidelines. All
necessary tools should be strictly used for correct installation of hinges.
Each set of shutters to be provided with 1 Nos. chrome finished multi-
purpose lock of approved make, 75mm medium sized stainless steel
tower bolt, 1 Nos. heavy duty SS ball catch, 100mm C type brushed SS
handle

Mode of measurement : Length & height of the storage shall be

measured for payment.

5.02 STORAGE CUM SEATING -TY-02

Behind MD /Workstation
5735x450mmx1200mm ht No 1.00 54,100.00
7650x450mmx 1200mm ht Nos 2.00 68,855.00
Fabrication:
Module: 1: Providing & fabricating storage 450mm deep & 1200mm
high formed out of 19mm thick MDF finished in 1mm thick approved
laminate consisting of storage with 2 track sliding shutter, & 1mm thick
approved laminate inside. The Sliding shutter of the storage shall be
formed out of 19mm thick MDF finished in 1mm thick approved
laminate on both side. The Strogae to accomodate Shelf made of 19mm
thk MDF finished with approved laminate as per the dwg .The exposed
edges of the storage shall be lipped using approved timber beading
formed to shape melamine polished, complete as per detail dwg. &
Architects instruction. The aluminium rail & handle other accessories
shall be as per the schedule & drawing.

Module:2: Providing & fabricating the Seating module of 450mm deep

x 450mm high formed out of 19mmthk MDF & finished with 1mm thk
laminate & soft cushion over the seating of 50mm thk.

Module :3: Providing & fabricating planter box formed out of 19mm
thick waterproof ply, sides shall be formed out of 19mm thick
waterproof ply. The boxing shall be cladded with laminate on all sides.
.The top to be lipped with approved 2mm thk edge binding complete as
per the drawing etc complete as per Architect's instruction.

Rate to include for natural plants of 1' ht along with GI tray & Plastic pot
etc as perthe architects instruction

Mode of measurement : Length & height of the storage shall be

measured for payment.

5.03 PANTRY COUNTER - SOLID ACRYLIC TOP sqm 11.00 24,590.00

Cafeteria/main pantry/Collab-03

24 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Fabricating and fixing low height storage cabinet of height 850mm and
depth 750mm formed of 19mm marine grade plywood
formwork/carcass and 1 Nos. internal shelf of 19mm marine ply finished
with 1mm thk approved laminate. Shutter of storage unit to be made of
19mm thk Marine ply finshed with approved colour laminate . The
shutter shall be mounted on 3Nos.. of approved spring loaded auto
closing hinges of approved make. The rear backing of the storage shall
be formed of 8mm thick marine plywood.

Low height cabinet to be topped with 12mm thick Solid Surface counter
sandwitched at the edge to form a fascia of 40mm thick affixed to
carcass with exposed edge profiled full round and polished to high
gloss . Cost also to include 50mm backspalash in 12mm thk Solid Acrylic
as per the drawing and instructions of the Architect. as per detail dwg.

Storage to be complete with hardware installed as directed to consist of

the following. Shutter to have Soft-closing spring loaded hinge of
approved make installed strictly as per manufacturers guidelines. All
necessary tools should be strictly used for correct installation of hinges.
Each set of shutters to be provided with 1 Nos. chrome finished multi-
purpose lock of approved make, 75mm medium sized stainless steel
tower bolt, 1 Nos. heavy duty SS ball catch, 177mm Insert
Handlefrom Haffle ( Article No : 151;58:60) SS handle.

Rate to include for SS rim of 200mm dia in the counter & the counter
shall be cut to the size & SS rim shall be fixed for the Dustbin

Consider Basic cost of 12mm thk Solid Surface @ Rs. 7500/sqm

Mode of measurement : Length & height of the storage shall be
measured for payment.

5.04 HAFELE HARDWARES FOR PANTRY COUNTERS

a. CAFÉ PANTRY
CTB.CS.107CLIP TOP BLUMOTION 107° STANDARD HINGE FOR OVERLAY PC 12.00 250.00
APPLICATIONS AND CLIP STEEL CRUCIFORM MOUNTING PLATE SET
Item Status: Active

265.59.50ETANDEMBOX PLUS M-HEIGHT GREY STANDARD DRAWER WITH A WEIGHT SET 6.00 3,550.00
CAPACITY: 30 Kg FOR A NOMINAL LENGTH OF 500mm
Item Status: Active

TBX.20.GR TANDEMBOX PLUS D-HEIGHT GREY STANDARD DRAWER WITH A WEIGHT SET 1.00 4,775.00
CAPACITY: 65 Kg FOR A NOMINAL LENGTH OF 500mm
Item Status: Active

556.24.962CUISIO SET GRAPHITE TRANSLUCENT FOR 900MM DRAWER WIDTH SET 2.00 6,850.00
INCLUSIVE DIVIDER & ALU. RAILS 2257.41.40686
Item Status: Active

556.50.557PLATES ORGANIZATION FOR DRAWER WIDTH - 800-840MM, HEIGHT- PC 1.00 3,320.00

60MM, SILVER COLLARED
Item Status: Active

25 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

152.01.501PVC - BUBBLE EMBOSSED MATTING IN GREY SHADE, 1500 MM X 1.2 MM MTR 4.00 3,320.00
THICK
Item Status: New

b. PHONE BOOTH PANTRY

CTB.CS.107CLIP TOP BLUMOTION 107° STANDARD HINGE FOR OVERLAY PC 4.00 250.00
APPLICATIONS AND CLIP STEEL CRUCIFORM MOUNTING PLATE SET
Item Status: Active

265.59.50ETANDEMBOX PLUS M-HEIGHT GREY STANDARD DRAWER WITH A WEIGHT SET 6.00 3,550.00
CAPACITY: 30 Kg FOR A NOMINAL LENGTH OF 500mm
Item Status: Active

TBX.20.GRZTANDEMBOX PLUS D-HEIGHT GREY STANDARD DRAWER WITH A WEIGHT SET 1.00 4,775.00
CAPACITY: 65 Kg FOR A NOMINAL LENGTH OF 500mm
Item Status: Active

556.24.962CUISIO SET GRAPHITE TRANSLUCENT FOR 900MM DRAWER WIDTH SET 2.00 6,850.00
INCLUSIVE DIVIDER & ALU. RAILS 2257.41.40686
Item Status: Active

556.50.557PLATES ORGANIZATION FOR DRAWER WIDTH - 800-840MM, HEIGHT- PC 1.00

60MM, SILVER COLLARED
Item Status: Active
3320
152.01.501PVC - BUBBLE EMBOSSED MATTING IN GREY SHADE, 1500 MM X 1.2 MM MTR 3.00
THICK
Item Status: New
1500
502.79.501EV-OEKO-CENTER 2FACH TRENNUNG SET 1.00
Item Status: Active
7770

c. COLLAB- 03
CTB.CS.107CLIP TOP BLUMOTION 107° STANDARD HINGE FOR OVERLAY PC 4.00
APPLICATIONS AND CLIP STEEL CRUCIFORM MOUNTING PLATE SET
Item Status: Active
246
265.59.50ETANDEMBOX PLUS M-HEIGHT GREY STANDARD DRAWER WITH A WEIGHT SET 6.00
CAPACITY: 30 Kg FOR A NOMINAL LENGTH OF 500mm
Item Status: Active
3542
TBX.20.GRZTANDEMBOX PLUS D-HEIGHT GREY STANDARD DRAWER WITH A WEIGHT SET 1.00
CAPACITY: 65 Kg FOR A NOMINAL LENGTH OF 500mm
Item Status: Active
4771
556.24.962CUISIO SET GRAPHITE TRANSLUCENT FOR 900MM DRAWER WIDTH SET 2.00
INCLUSIVE DIVIDER & ALU. RAILS 2257.41.40686
Item Status: Active
6846
556.50.557PLATES ORGANIZATION FOR DRAWER WIDTH - 800-840MM, HEIGHT- PC 1.00
60MM, SILVER COLLARED
Item Status: Active
3320
152.01.501PVC - BUBBLE EMBOSSED MATTING IN GREY SHADE, 1500 MM X 1.2 MM MTR 3.00
THICK
Item Status: New
1500

5.04 PANTRY COUNTER - GRANITE TOP sqm 3.00 15738

Food holding area/potwash/cutlery store

26 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Fabricating and fixing low height storage cabinet of height 850mm and
depth 600mm formed of 19mm marine grade plywood
formwork/carcass and 1 Nos. internal shelf of 19mm marine ply finished
with 1mm thk approved laminate. Shutter of storage unit to be made of
19mm thk Marine ply finshed with approved colour laminate . The
shutter shall be mounted on 3Nos.. of approved spring loaded auto
closing hinges of approved make. The rear backing of the storage shall
be formed of 8mm thick marine plywood.

Low height cabinet to be topped with 20mm thick Granite counter

sandwitched at the edge to form a fascia of 40mm thick affixed to
carcass with exposed edge profiled full round and polished to high gloss
Cost also to include 50mm backspalash in 20mm thk Granite as per the
drawing and instructions of the Architect. as per detail dwg.

Storage to be complete with hardware installed as directed to consist of

the following. Shutter to have Soft-closing spring loaded hinge of
approved make installed strictly as per manufacturers guidelines. All
necessary tools should be strictly used for correct installation of hinges.
Each set of shutters to be provided with 1 Nos. chrome finished multi-
purpose lock of approved make, 75mm medium sized stainless steel
tower bolt, 1 Nos. heavy duty SS ball catch, 177mm Insert
Handlefrom Haffle ( Article No : 151;58:60) SS handle.

Rate to include for SS rim of 200mm dia in the counter & the counter
shall be cut to the size & SS rim shall be fixed for the Dustbin

Consider Basic cost of 20mm thk Granite @ Rs. 2000/sqm

Mode of measurement : Length & height of the storage shall be
measured for payment.

5.05 REPRO STORAGE sqm 4.00 10,325.00

Providing & fabricating storages 600mm depth formed out of 19mm
thick commercial ply finished in 1mm thick approved laminate. The top
shall be formed out of 19mm thick commercial ply finished in 1mm thick
approved laminate, exposed edge of the table shall be lipped using
approved timber beading formed to shape melamine polished. The
shutter of the storage shall be formed out of 19mm thick ply, finished in
1mm thick approved laminate mounted using Auto closing hinges of
approved make. The shutter shall be provided Finger Grooves for
opening. The storage shall be provided with shelf formed out of 19mm
thick commercial ply finished in 1mm thick approved laminate on both
sides mounted over SS adjustable pins of approved make.

All internal surfaces to be post laminated with 0.8mm thick matt

finished laminate of approved shade. All exposed surfaces (underside,
topside to be finished with 1mm thick decorative laminate of approved
shade.

27 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Storage to be complete with hardware installed as directed to consist of

the following. Shutter to have auto-closing spring loaded hinge of
approved make installed strictly as per manufacturers guidelines. All
necessary tools should be strictly used for correct installation of hinges.
Each set of shutters to be provided with 1 Nos. chrome finished multi-
purpose lock of approved make, 75mm medium sized stainless steel
tower bolt, 1 Nos. heavy duty SS ball catch, complete as per the
drawing / instructions of the Architect.

Mode of measurement : Length & height of the storage shall be

measured for payment.

5.06 AV STORAGE sqm 4.62 9,835.00

Training room/10S TP room
Providing & fabricating AV storage 600mm depth formed out of 19mm
thick commercial ply finished in 1mm thick approved Laminate on the
external side, The top of the storage to be finished with 1 mm thk
approved Laminate .and finished on the internal side using 1mm thick
approved laminate. The storage shall be provided with shelve formed
out of 19mm thick approved laminate finished in 1mm thick approved
laminate, edges of the shelves shall be finished in 2mm thick approved
edge binding . The shelves of the storage shall be mounted using
approved SS adjustable pins. The shutter of the storage shall be formed
out of 19mm thick commercial ply finished in 1mm thick approved
Laminate on the external side with 1mm thick approved Laminate on
the inside mounted over spring loadedsoft closing hinges of approved
make, tower bolt. The exposed edges of the storage shall be lipped
using approved timber beading formed to shape melamine polished,
complete as per detail dwg. & Architects instruction.

Cost to include provididng and fixing SS Grill of size 100 x 150mm for
Ventilation and Air Circulation.

Mode of measurement : Length & height of the storage shall be

measured for payment.

5.07 OVERHEAD STORAGE sqm 6.00 8,650.00

450mm deep X 600mm ht.
Food holding area/cutlery store/Repro
Providing & fabricating storage formed out of 19mm thick commercial
ply finished in 1mm thick approved laminate on both side. The shelves
of the storage shall be formed out of 19mm thick commercial ply
finished in 1mm thick approved laminate mounted over SS adjustable
pins. Shutter of storage unit to be of 19mm thk Commercial Ply Finished
with 1mm thk approved Laminate. Each set of shutters to be provided
with 1 Nos. chrome finished multi-purpose lock of approved make,
75mm medium sized stainless steel tower bolt, 1 Nos. heavy duty SS
ball catch, 100mm C type brushed SS handle , Soft closing Hinges.
complete as per detail dwg. & Architects instruction.

28 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Mode of measurement : Length & height of the storage shall be

measured for payment.

5.08 RECEPTION TABLE nos 1.00 341,500.00

size : 7500x750mmx 900mm ht
Table top: Table top of 750 mm wide to be formed out of of 19mm
thick MDF clad with 6mm thick approved Solid acrylic surafce outside &
from inside 1mmthk approved laminate complete as per detail dwg. &
Architect's instruction.

Modesty panel: Modesty shall be formed out of 19mm thick MDF

boxing finished in 4mmthk approved veneer & to a height of
300mmhigh cladded with SS of 1.5mmthk 304 grade etc complete as
per the details shown in the drawing.

Storage Unit : Providing and fixing Pedestal unit 2nos of 620mm X

550mm X 650mm ht. made out of 19mm thk MDF finished with 1mm
thk approved laminate . Drawer unit to have 2 drawers and 1 shutter
made out of 19mm thk commercial ply finished with approved 1mm thk
laminate , mounted on approved drawer channel, central locking,
approved handle. Complete as per the detailed dwg and instructions of
the Architect.

Transaction Counter : The Transaction Counter to be made up of

19mm thk MDF finished with approved 4mmthk Veneer on both sides
as per the detailed desing & instuctions of the Architect.

Note: For curved surface 6mmthk flexi ply & 4mmthk MDF shall be used
Consider Basic cost of Laminate @ Rs. 485/sqm
Consider Basic cost of Vener @ Rs. 1800/sqm

5.09 TRAINING ROOM TABLE

Dimension: 5000(outside)x(2000+1550inside) x 600wx750mm nos 8.00 54,650.00
ht (refer drawing)
Providing and Fabricating Table in 25mm Prelaminated Partical board.

Table top: The table top to be formed out of 25mm Prelaminated

Partical Board. The edge of the table to be finished with 2mm thk
approved Edge Binding . The top to house cable trough for cable
management with 19mm thk ply openable as per details, complete as
per detail dwg. and instructions of the Architect.

Base: The base of the table shall consist of MS / Aluminium legs as per
manufacturers spec together by welding, with levellers complete as per
detailed dwg.

Modesty panel: Modesty shall have a perforated GI sheet as per the

details shown in th drawing

Cable tray in MS powdercoated finish to be provided below the table top

as shown in dwg The cable tray will house electrical sockets and data
ports and will be accesable to user with a flap .

Cost also to include provididng and Fixing 50mm dia Spine as per
Manufacturers specs.

29 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Note: Curved surfaces & edges in curved surfaces shallbe as per the
details shown in the drawing.

5.10 TRAINING ROOM HEAD PODIUM No 1.00 19,675.00

Providing, fabricating & fixing the Training room head Podium formed
out of 19mmthk MDF alround & finished with 1mm thk approved
laminate. The podium shall have a provision for a mic & books holder
etc complete as per the details shown in the drawing. The edge of the
table to be finished with 2mm thk approved Edge Binding

5.11 MEDICAL ROOM TABLE

Dimensions: - 1440mm x 675mm x 750mm ht & Side storage- nos 1.00 27,740.00
1830 x 500mm x 650mm ht
Table top: Table top to be formed out of 19mm thick commercial ply
finished with 1mm thk approved laminate, The edge of the table top
shall be finished with approved colour edge binding, complete as per
the dwg and the instructions of the Architect. cost to include providing
and fixing wire manager of approved colour.

Modesty panel: Modesty panel to be formed out of 19mm thick

commercial ply finished with approved 1mm thk laminate , complete as
per the detailed dwg and instructions of the Architects. Cot also to
include 32mm dia SS pipe footrest as shown in the dwg

Side Storage : The Side Storage shall be of size 1830mm x 500mm x

650mm high storage consisting of shutter formed out of 19mm thick
Commercial ply finished with 4mm thk approved Veneer, Melamine
Finished. The storage to provided with 19mm thk Commercial ply
finished with approved colour 1mm thk laminate, shelf as per the dwg.
The shutter shall be mounted approved quality hardwares, complete as
per detail dwg. & Architect's instruction.

5.12 RUNNING COUNTER - LAMINATE FINISH rm 7.00 4,920.00

BMS Room
Providing & fabricating counter top made up of 19mm thick commercial
ply finished with 1mm thk approved Laminate , 600mm deep. All the
exposed edges to finished with approved edge binding , the table top
shall be supported by 50mm dia M.S supports powder coated. complete
as per Architect's instruction.

Rate to include for aluminium flip open box/ gourmet hole & the
Electrical socket cable management etc as per the details shown in the
drawing.

5.13 RUNNING COUNTER - GRANITE FINISH rm 5.50 7,280.00

Potwash

30 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Providing & fabricating counter top made up of 19mm thick Marine ply
finished with 20mm thk approved Granite , 600mm deep. All the
exposed edges to finished with approved edge finishing , the table top
shall be supported by 50mm dia M.S supports powder coated. complete
as per Architect's instruction.

Consider Basic cost of 20mm thk Granite @ Rs. 2000/sqm

5.14 HIGH RAISED C SHAPE TABLE - SOLID ACRYLIC FINISH Nos 2.00 246,000.00
Cafeteria
Dimension: 7650x600x1050mm ht
Counter top: Counter top to be formed of 25mm x25mmx 2mm thk M.S
Box section frame work welded together to be cladded with12mm thick
marine ply to make boxing of 60mm thk finished with 6mm thk
approved Corian on top side , from inner & bottom side . The edge of
the table top shall be finished with approved colour Corian river fall
edge, complete as per the dwg and the instructions of the Architect.

Base: Base shall have a verticals /intermediate to be formed out of of

25mm x 25mm x 2mm thk M.S frame work welded together to be
cladded with 19mm thick Marine ply to make boxing of 60mm thk
finished with approved 6mm thk approved Corian on both sides ,
complete as per the detailed dwg and instructions of the Architects.

Consider Basic cost of 6mm thk Solid Surface @ Rs. 6500/sqm

5.15 PIGEON HOLES STORAGE sqm 5.00 12,780.00

Providing and fixing Pigeon hole storage units of 250mm deep made in
19mm thick plywood and finished in laminate of approved shade. The
internal shelves shall be made in 19mm thick plywood with teak wood
lipping . The external surface shall be finished in 1.5mm thick laminate
and internal surfaces shall be laminated with 1mm thick laminate of
approved shade. All the exposed wooden shall be stained to shade as
directed by the Architects and polished melamine.

5.16 COT WITH BED - BUNKER TYPE nos 2.00 29,500.00

Cot -Provide and fix Cot of size 900x 1800 x 2100mm comprising of
approved timber Ply wood supports, 12mm thick ply base for the bed
including necessary framing, head board with 19mm ply finished with
1mm approved laminate incoporating light cove around the headboard,
The base shall be formed out of 50mm square Brushed finish SS
support,complete in all respect as shown on drawings to meet
Architect's approval. Rate shall include for the 6" thick foamed matress
of approved make with bed spread and pillows,complete as per the dwg
and the instructions of the Architects. Cost also to include provididng &
fixing cot side table as per the drawing & instructions of the Architects.

5.17 KEY CHEST sqm 4.00 11,800.00

31 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Dimensions: - 1500 mm X 1200mm X 200mm

Providing & fabricating Kety Chest unit of size 1500mm X 1200mm X
200mm deep clear opening formed out of 19mm thick MDF finished with
1mm thk approved colour Laminate , back to be finshed with 8mm thk
ply finsihed with approved 1mm thk Laminate, as per detail dwg.
The Key Chest to consist of shutter formed out of 19mm MDF Frame
work finsihed in approved 1mm thk Laminate , The Frame work to be
fixed with 6mm thk Clear Glass with approved wooden beeding. The
shutter to be mounted on Soft closing hinges of approved make &
provided with one no. cabinet lock of approved make. Cost also to
include proviidng and Fixing ss J Hooks on to the Back ply to hang Keys
complete as per detail dwg. and instructions of the Architect.

5.18 OPEN SHELF

size : 1200mm x 300mm - Collab/Main pantry Nos 8.00 1,475.00
size : 1000mm x 300mm - Main pantry Sink Nos 1.00 1,280.00
Providing , fabricating & fixing the 19mm thk MDF finished with 1mm
thk laminate the openshelves shall be supported on MS brackets &
cladded with 19mmthk MDF fixed to the column/wall using propritery
srews etc complete as per the details shown in the drawings.

5.19 BAINE MARIE & TUCK SHOP COUNTER - CAFETERIA

Dimensions: - 11500 mm X 300 mm X 900mm ht. Nos 1.00 72,800.00
Counter top: Counter top to be formed of 50mm x50mm 2mm thk M.S
frame work welded together to be cladded with19mm thick Marine ply
to make boxing of 75mm thk finished with 12mm thk solid acrylic
surface. The edge of the table top shall be finished with approved
colour Corian, complete as per the dwg and the instructions of the
Architect. The counter shallhave an SS inlay of approved size has per
the architects instructions & drawings.

Base: Base to be formed out of of 50mm x50mm 2mm thk M.S frame
work welded together to be cladded with 19mm thick Marine ply to
make boxing of 75mm thk finished with Packing wood of 60mm x
20mm thk with 20mm c/c & Finished with melamine polish. complete
as per the detailed dwg and instructions of the Architects.

Consider Basic cost of 12mm thk Solid Surface @ Rs. 7500/sqm

Consider Basic cost of Packing Wood. Rs. 65/kg

5.20 BAINE MARIE & TUCK SHOP PORTAL - CAFETERIA Nos 1.00 83,700.00
18000x300x600mm ht

32 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Providing and fixing Portal 175mm thk made out of 25 x 25 x 2mm thk
MS Frame work welded together to be cladded with 19mm thk Marine
ply finished with . with Packing wood of 60mm x 20mm thk with 20mm
c/c & Finished with melamine polish. & from inside finished with
approved acrylic emulsion paint over 12mm thk Gyp etc complete as
per the detailed dwg and instructions of the Architects. the frame work
shall be fixed to the true ceiling & wrapped with 19mmthk marine ply.

Consider Basic cost of Packing Wood. Rs. 65/kg

5.21 TRAINING ROOM PORTAL Nos 1.00 49,200.00

6320x300x2700mm ht
Providing and fixing Portal 100mm thk made out of 50x25mm thk GI
sections & cladded with 12mm thk MDF on both sides & the whole
portal shall be finished with approved cement finish paint.

Planter Boxes : 6320x300x450mm ht shall be fabricated using 19 mm

waterproof ply finished in 1mm thk laminate of approved make & shade
on all sides.

Base : Base shall be formed out of 19mm thick waterproof ply, sides
shall be formed out of 19mm thick waterproof ply. The boxing shall be
cladded with laminate on all sides.The top to be lipped with approved
2mm thk edge binding complete as per the drawing etc complete as per
Architect's instruction.

Cost to include providing and Fixing GI Tray & plastic pot along with
natural plants in side the Planter box as per the detailed dwg.

Consider Basic cost of Cement finish paint- Rs. 1615/sqm

Make Considered: Green Heart-GFX/Armour Coat/Shivani
fashions-cameleo

5.22 GREEN WALL PORTAL & TRUFF Nos 1.00 54,650.00

9500x300x2700mmht-75mm thk
Portal: Providing, Fabricating & fixing the Portal around the green wall
formed out of 30x30mm thk MS boxsection cladded with 19mm thk ply
both side to foram a 75mm thk portal & finished with 2mm thk Interior
grade alcobond of approved shade etc complete as per the details
shown in the drawing & fixed to the wall.

Truff: Providing, Fabricating & fixing the Truff of 150mmhigh around the
green wall formed out of 30x30mm thk MS boxsection cladded with
19mm thk ply & finished with 2mm thk Interior grade alcobond of
approved shade etc complete as per the details shown in the drawing &
fixed to the wall.

Basic Price of ACP : Rs. 970/sqm (excluding tax)

SUB TOTAL CARRIED TO SUMMARY

33 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

6.00 WALL FINISHES

Note:
Contractor shall protect the entire furniture provided by him or other
agencies before starting the painting / punning work and shall be held
responsible for any stains or damage including aluminum windows, AC
grilles, Diffusers, grid ceiling, Modular furniture, carpet etc.

6.01 POP WALL PUNNING sqm 725.00 240.00

Providing and applying Plaster of Paris punning of average thickness
12mm to existing wall surfaces in true level and plumb complete as
directed.

6.02 ACRYLIC EMULSION PAINT ( Premium ) sqm 5,700.00 235.00

Providing and applying Acrylic Emulsion ( Premium ) paint finish to walls,
blocked partitions, and plasterboard ceiling surfaces of approved shade,
texture.

Existing wall surfaces to be prepare by scraping away any loose

particles, dust, etc by washing and scrubbing and 1 coat of primer
approved by manufacturer applied. The wall surfaces are then
smoothened using putty approved by the manufacturers. Surfaces are
then sandpapered to achieve a smooth finish and two or more coats of
paint are applied as per manufacturer's specification.

Mode of measurement : Length & height of the Painted surface

shall be measured for payment.

6.03 CEMENT FINISH PAINTING sqm 210.00 2,140.00

Providing and applying Cement paint finish to walls, blocked partitions,
and plasterboard ceiling surfaces of approved shade, texture.

Existing wall surfaces to be prepare by scraping away any loose

particles, dust, etc by washing and scrubbing and 1 coat of primer
approved by manufacturer applied. The wall surfaces/Partititon are then
smoothened using putty approved by the manufacturers. Surfaces are
then sandpapered to achieve a smooth finish and two or more coats of
paint are applied as per manufacturer's specification.

The Cement finish shall have rivet of approced size & approved loations
& grooves of 6mm x 6mm as per the architects requirement & details
shown in the drawing.

Note: Cement paint applied over 12mmthk MDF to achieve the rivet of
required size & grooves

Mode of measurement : Length & height of the Painted surface

shall be measured for payment.
Consider Basic Price: Rs. 1615/sqm(excluding tax)
Make Considered: Green Heart-GFX/Armour Coat/Shivani
fashions-cameleo

34 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

SUB TOTAL CARRIED TO SUMMARY

7.00 MISCELLANEOUS WORKS

7.01 PELMET FOR BLINDS Rmt. 190.00 1,000.00
Providing and fixing Pelmet for blinds, made out of 19mm thick
Marine ply, exposed edges of the pelmet shall be finished in approved
Laminate. The pelmet shall be in reversed "U" shape and shall be
300mm wide x 150mm in ht. The rate quoted shall be including fixing
the pelmet with GI support @ 1200mm c/c anchor bolted to the
structural ceiling etc., complete as per detail drawings.

7.02 PELMET FOR PULL DOWN SCREEN Rmt. 8.00 1,500.00

Providing and fixing Pelmet for pull down screen in meeting
rooms, made out of 19mm waterproof ply for top and 12mm for sides.
The pelmet shall be in reversed "U" shape and shall be 200mm x
250mm in size. The rate quoted shall be including fixing the pelmet with
GI support @ 1200mm c/c anchor bolted to the structural ceiling,
making the the pelmet ready to receive acrylic emulsion paint etc.,
complete as per drawings.

7.03 SOFT BOARD PANEL sqm 2.00 3,935.00

Providing and fixing Soft Board Panel over existing partition / wall with
12mm marine ply backing and 12mm thick. soft board (Cellotex- VOC
FREE) with Gripper System.edges of the soft board to be finished with0 .
5mm laminate to get better finish of corners as directed by the
Architect. Consider Basic Price of fabric Rs. 500/Rmt excluding
tax, delivery onsite and wastage.

7.04 FROSTING FILM sqm 55.00 1,140.00

Providing & fixing printed frosting film of 3M make of crystal range with
approved image printed on the film as per design & installed over the
glass partition as per manufacturer's specification & installation
guidelines. Vendor shall include wastage while quoting. Vendor shall
provide 10 year warranty as per manufacturer's guidelines.

Consider the Basic cost of film at Rs. 940 / sqm

Mode of measurement : Installed film shall be measured in
length & height for payment.

7.05 SOLID ACRYLIC SURFACE BAND rm 12.00 225.00

Providing & fabricating 150mm High Band made of 6mm thk Solid
Acrylic with 12mm thk MDF backing fixed on the the Existing frame
work whereever specified., complete as per the drawing & instructions
of the Architects.

Consider Basic cost of SAS @ Rs.7500 /sqm excluding taxes

Mode of Measurement : Cladded Solid Surface area will be
measured for payment.

35 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

7.06 PEN HOLDER nos 10.00 985.00

Providing & fabricating 200 x 75mm Aluminium Pen Holder fixed on the
Partition/corian band etc complete as per detail dwg.

7.07 S.S SINK

Sink With Drain board: potwash Nirali - Silient Olympia nos 1.00 14,800.00
Sink without drain board: Tuck shop & Main pantry/Box wash nos 4.00 12,300.00
(QUATEZ make)
Providing and fixing SS Sink with Drain board & with out drainboard of
standard make and quality with necessary fittings as per locations
shown in the drawing etc complete as per the instructions of architect

7.08 SINK MIXER nos 5.00 3,935.00

Providing and fixing sink mixer of 20mm nominal bore (Jaquare make) or
approved make including the cost of material and labour as per the
specifications and instructions of the Architect.

Make : Jaquar Continental Range

7.09 WINDOW CILL sqm 10.00 3,935.00

Providing & fabricating window cill panelling formed out of 50 x 25mm
Aluminium Frame work with 12mm thick MDF formed to shape finished
in approved 1mm thk laminate on 4mm thk MDF factory pressed ,
complete as per detail dwg. Cost to include post formed edge profile at
the top.

Note : Factory Finished with Clip on System will be preferred.

Consider the Basic price of Laminate @ Rs. 485/ sqm

7.10 PLY BOXING sqm 100.00 1,820.00

Providing and fixing ply boxing using 19mm MDF of thikness from
150mm to 400mm on salwood frame work of section 50mmx50mm,
etc..complete as per the drawigns and instrucions of the Architects.

7.11 PEBBLES kg 150.00 120.00

Providing & supplying of medium size white color pebbles as per the
instructions of the Architect

7.12 TRAP DOOR nos 2.00 6,150.00

Providing and Fixing Trap Door of AMF Make 600 x 600mm , complete as
per the manufacturers instructions .

7.13 SLOTTED ANGEL STORAGE sqm 25.00 3,450.00

Providing & installing Slotted angle storage of 450mm deep X 2100mm
ht. with shelves at 420mm center to center. The storage shall be
finished in approved powder coating.

7.14 RAMP sqm 5.00 9,840.00

36 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Providing & fixing Ramp Made frame work made out of 25mm X 25mm
MS Section, fixed at 150mm centre to centre. The horizontal members
to be formed out of 25mm X 25mm MS Section fixed at ground . The
top to be Covered with a layer 6mm thick MS Checkered Plate ,
complete as the detail dwg and the Architects instructions

7.15 STEPS sqm 5.00 9,840.00

Providing and fixing steps with 300mm tread & 150mm riser made of
25 x 25mm MS Frame Work fixed on to the ground , The top to be
covered with a layer of 6mm thk MS Checkered Plate, complete as the
detail dwg and the Architects instructions

7.16 3M FLOOR MATTS

Providing and Supplying 3M floor matts
Toilet Entrance - 3M Aqua Heavy Duty - Sqm 6.50 7,380.00
Main Entrance - 3M Terra duty - Size - sqm 8.00 6,150.00

7.17 PLANTER BOX

size : 900mm x 200mm x 300mm Nos 5.00 3,440.00
Planter Boxes shall be fabricated using 19 mm waterproof ply finished in
1mm thk laminate of approved make & shade on all sides.

Base : Base shall be formed out of 19mm thick waterproof ply, sides
shall be formed out of 19mm thick waterproof ply. The boxing shall be
cladded with laminate on all sides.The top to be lipped with approved
2mm thk edge binding complete as per the drawing etc complete as per
Architect's instruction.

Cost to include providing and Fixing GI Tray & plastic pot along with
natural plants in side the Planter box as per the detailed dwg.

7.18 DECORATIVE CEMENT POTS

size : 450mm dia x 600mm ht/700mm/800mm Basic priceRs. Nos 12.00 3,440.00
2800/No
size : 200mm dia x 300mm- Rs.1500/No Nos 10.00 1,850.00
Providing & placing the cement pots along with Natural plants of 1'/2'
high with GI tray/FRP tray of approved make & approved design etc
complete as per the drawing & as instructed by architects.

Base of pot to be covered in a way to make no direct contact to

finished floor.

7.19 FIRE SEALENT Sqm 10.00 12,300.00

Providing and fixing Expanding Fire Stop Mortar load bearing for a
fire resistance of 120 minutes integrity with insulation, as per BS 476
Part 20: 1987 and FM & UL Classified. Provide the framing or
reinforcement using 12mm steel reinforced bars at 200mm centres in
the horizontal opening then pour the fire stop mortar to a depth of
100mm. Ensuring the fire protection for special conditions like Humid
environment and corrosive conditions. (3 bags / sq.mt approx.)

37 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Location where Sealent work to be done : General Shaft , Plumbing

shaft , AHU Room shaft , Data /Telcommunication shaft , Electrical
Room/UPS room shaft , Utility shafts , Hydrant shaft , Rain water shaft

7.20 FIRE SEALENT - VERTICLE OPENINIGS Sqm 10.00 12,300.00

Providing and fixing of Mineral wool barrier system for a fire resistance
of 120 minutes, Mineral wool boards shall be pre-coated with fire stop
coating and completed with Fire rated Sealant,Mimimum -120mm
thickness (2x60mm) Density >170 kgs/M3. Mineral wool Barrier
complete system tested as per DIN 4102 / BS 476 part 20 for 120mints,
Pre-Coated Board systems also approved by FM and UL.

Location where Sealent work to be done : AHU ROOM openings

around ducts , Opening above fire door in AHU rooms , Other vertical
openings in HUB room/Server room Etc

7.21 WATER BOTTLE RACK Nos 1.00 24,590.00

size : 1500mm x 600mm x 2000mm
Providing and Fixing Water Bottle Rack Made of 25 x 25mm Angle
Section Welded together vertically and Horizontally to make stand ,
complete as per the desing and instructions of the Architect.

All MS sections shall be powder coated to approved shade over a coat of

zinch chromate primer.

7.22 GUARD RAIL rmt 10.00 1,970.00

Providing & Fixing 38mm dia SS pipe with necessary supports,, Flange ,
Baseplate to Guard the Partitions as per the instructions of the
Architects.

7.23 MEDICAL ROOM CURTAINS sqm R/o 7,528.00

Supply and install Curtains including necessary drapery rods,
accessories, tie back hooks, etc., with approved lining fabric complete in
all respect to meet Architect's approval

Consider the Basic cost of Fabric at Rs. 200 / mtr

7.24 MIRROR- Handwash Sqm 9.00 3,740.00

Providing, Fabricating & fixing the 6mm thk mirror of 600mm dia of
approved make fixed over 12mmthk Marine Ply using a MS frame work
of 25x25mm Boxection using proper screws/clamps . The MS frame work
shall be suspended from the wall to a drop down of 1200mm ht with
proper anchoring to the walls using cables . the Mirror shall be have a
beading & strip Lighting around the Mirror & Shall Be melamine polished
All MS sections shall be treated with 2 coats of Powder coat over a coat
of zinch chromate primer etc complete as per the details in the
drawings & as instructed by architect.

7.25 POTWASH WINDOW OPENING nos 3.00 10,820.00

38 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Dimensions: 1040mm X 1200mm ht.

Provididng and Fixing Window opening of size 1040 x 1200mm , The
thickness of the partition ( 100mm ) all round the window to be finished
with 12mm thk MDF and 18mm thk approved granite, edges chamfered.
Complete as per detailed drawing and instructions of the Architect

Cost to include provididng and Fixing a 20mm thk Granite Ledge at

900mm height of Size 1040 x 450mm set over CM 1:4 20mmthk
average. Edges chamfered, complete as per the Detaield Drawing and
instructions of the Architect.

Consider Basic cost of 20mm thk granite 2691/sqm Excluding

Taxes
7.26 VINYL GRAPHICS Sqm 160.00 2,595.00
Providing & fixing vinyl Clear printed graphic film fixed using film
adhesive. Vendor shall include wastage while quoting. Vendor shall
provide 3 year warranty as per manufacturer's guidelines.

Consider Basic cost of Vinyl Graphics @ Rs. 2045/sqm (excluding

taxes)
Graphics Design Shallbe Included in the costing.

7.27 JET BLACK GRANITE JAMBS Rmt 23.00 1,480.00

Providing & laying the 19mm (+/-)1mm thk prepolished Jet black granite
jambs of 200mm width as per the drawing & wherever specified in the
flooring layout using average 20mm thk Cement mortar 1:4 etc
complete as per the drawings & engineer incharge & architects
instruction. Rate to include for chamfering the edges as per the
drawings.

Mode of Measurement : Running Length will be measured for

payment.
Consider Basic cost of 20mm thk granite 2691/sqm Excluding
Taxes

7.28 JET BLACK GRANITE THRESHOLD Rmt 5.00 1,480.00

Providing & laying the 19mm (+/-)1mm thk prepolished Jet black granite
jambs of 200mm width as per the drawing & wherever specified in the
flooring layout using average 20mm thk Cement mortar 1:4 etc
complete as per the drawings & engineer incharge & architects
instruction. Rate to include for chamfering the edges as per the
drawings.

Mode of Measurement : Running Length will be measured for

payment.
Consider Basic cost of 20mm thk granite 2691/sqm Excluding
Taxes
7.29 REPAINTING OF SHAFT DOORS/STAIRCASE DOORS Sqm 42.00 250.00
Providing & applying the enamel spray paint for the shaft doors of
approved shade & make . Before applying paint the surface shallbe
scrapped & removed the andulation by scrapping & applied a coat of
primer etc complete as per the architects instructions.

39 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

7.30 ARTWORKS Nos 72.00 1,970.00

Providing & fixing the fine arts of 600mm x 1200mm of approved design
and art fixed with necessary fittings etc complete as per the
architectural drawings & architects instructions.

7.31 3MTAPE- CONCRETE FINISH Rmt 3.00 785.00

Providing & fixing the 3M tape of approved shade where ever necessary
in design etc complete as per the details shown in the drawing.

7.32 3M WRITABLE FILM Sqm 5.00 3,310.00

 Supply & Installation of 3M white writable Combination Film. The film
should have a gloss finish and grey adhesive for good hiding power and
will be applied on a flat surface with clean, dry, very smooth and non-
porous surfaces. The use of xylene free markers is recommended for
writing and the use of a soft lint free towel such as 3M Scotch Brite
microfiber cloth is recommended for cleaning the film. The film can be
cleaned occasionally with mild detergent and water if required

Consider the Basic cost of 3M Film as  Rs . 3120 / sqm excluding taxes

7.33 SS DUSTBIN Nos 7.00 495.00

350mm Dia x 750mm high
Providing & placing the SS dustbin as per the architects selection &
instructions.

7.34 WATER DISPENSER Nos 4.00 12,400.00

Providing & placing the Water Dispenser of Blue star or Approved
equivalent make as per the architects instructions & manufactures
specification

SUB TOTAL CARRIED TO SUMMARY

8.00 CIVIL WORKS

8.01 DEMOLITION OF 200MM THICK SIZE-SOLID BLOCK MASONRY sqm 10.00 250.00
Demolition of 200mm thick SBM wall with the plastering including
carting away the same as directed by the Engineer-in-charge.

8.02 DEMOLITION OF 150MM THICK SIZE-SOLID BLOCK MASONRY sqm 10.00 250.00
Demolition of 150mm thick SBM wall with the plastering including
carting away the same as directed by the Engineer-in-charge.

8.03 FLOOR CHIPPING sqm 2.00 395.00

Chipping the Existing floor to lay the new flooring, and catering away
the debris from site.

40 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Mode of measurement : Chipped floor area shall be measured

for payment.

8.04 REMOVING OF EXISTING DOORS Nps 4.00 685.00

Removing of Existing entrance fire door and handing over the doors to
client along with hardwares & Door jambs etc . Carting away the debris
as per the instructions of Engineer In charge.

8.05 CONTRUCTION OF 150MM THICK SIZE-AEROCON BLOCK sqm 350.00 1,690.00

MASONRY
Providing and constructing 150mm thick solid concrete block masonry
walls as specified in cement mortar 1:6 using precast blocks of 400 x
150 x 200mm size with minimum crushing strength of 35 kg/sq. cm(as
per IS 2185) for construction with necessary scaffolding, staging,
striking and raking out joints to at least 10mm depth, with all lead and
lift at all levels, curing, loading and unloading, transportation and all
other incidental charges etc., complete as directed by the Engineer-in-
charge.

Rate to be inclusive of lintels all around in 4ft & 8ft lvls.

8.06 CONTRUCTION OF 75MM THICK SIZE-AEROCON PANEL MASONRY sqm R/o 1,506.00
Providing and constructing 75mm thk Aerocon Panel masonry of size
600x75x2700mm and strength not less than 35 Kg/sqm in
superstructure including cost of materials, labour charges, scaffolding,
curing complete as per specifications.

Rate to be inclusive of lintels all around in 4ft & 8ft lvls.

8.07 CONTRUCTION OF 230MM THICK BRICK MASONRY Cum R/o 11,543.00

Providing & constructing the Brick using 230mm x 110mm x 76mm
thick First class bricks of approved make with Compressive strength of
35Kg/sqm using 1:4 CM(1 part of Cement & 4 Part of sand). Rate to
include for pointing, scafolding, raking out joints staging at all lifts &
leads at all levels etc complete as per the details in the drawings and
instructions of the Architect. Rate to include for pointing where ever
specified.

Rate to be inclusive of lintels all around in 8ft lvl.

8.08 PLASTERING sqm 700.00 270.00

Preparing the surface, Providing & applying plastering to Internal
masonry walls, columns, beams, jambs etc., average 15mm thick in CM
1:6 (1 cement: 6 fine sand) with lime rendering in line at all levels
including hacking to RCC surfaces, providing 150 mm wide GI plaster
mesh of Arpitha or approved make in the junctions of the masonry &
RCC works, over electrical conduiting and wherever applicable as per
manufacturer's specifications, plastering the mesh in CM 1:2. The work
shall include cost of materials, labour, curing, all lead and lifts at all
levels, loading and unloading, scaffolding and all other incidental
charges etc., complete and as directed by the Engineer-in-charge.

41 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

8.09 WATER PROOFING Sqm 70.00 785.00

Providing waterproofing for the Walls by surface method in two layers in
cement mortar 1:4 of thickness 35mm for floor, 25mm for walls till floor
level and 18mm till 300mm above / below floor level with waterproof
admixture as per manufacturer's specification with a minimum
guarantee of 10 years including the cost of hydro testing of the area etc
complete.

Pot wash/handwash/bainemarie etc : Make : Fosroc , Sika India

Pvt.Ltd

8.10 CINDER FILLING Cum 7.00 2,950.00

Providing cinder filling for the sunken portions a toilet sunken slab and
wherever specified with cement mortar 1:3 with approved waterproofing
compound including compacting, then the layer of cinder and then
surface finishing with cement mortar 1:3 with waterproofing compound
evenly to take floor finishing (tiles), inclusive of all leads and lifts,
levelling, curing etc complete as per directions of engineer-in charge

Mode of Measurementy : only plan area to be measured for

payment

8.11 SCREED CONCRETE OVER CINDER Sqm 70.00 640.00

Providing & laying plain cement concrete 1:3:6 for a mimumum
thickness of 40mm over prepared bed in toilets with 12mm down size
aggregates including the cost of all materials, labour, compaction,
levelling, at all levels, leads and lifts, curing, shuttering etc complete as
per instruction of Engineer-in charge

Mode of Measurementy : only plan area to be measured for

payment

8.12 R.C.C LINTEL

150mm x 200mm rm 18.00 1,130.00
Providing and laying Reinforced Cement Concrete of M25 grade at all
levels, using river sand, 20 mm and down size coarse aggregates,
including all leads and lifts, vibrating, scaffolding wherever necessary,
curing and hacking as directed, including cost of required steel ,
necessary shuttering, centering and staging (approved by the engineer)

8.13 CORE CUTTING

Dia : 210mm Nos 2.00 3,445.00
Dia : 100 mm Nos 2.00 2,950.00
Providing, Supplying & Drilling/Core Cutting of required dia outlets using
low vibration mechanical means. Cost to include identification of
embeded reinforcement using proformeter, closing of core cut using self
sealing nonshrink grouts of approved make either single or double
component with necessary form work, staging, tools, etc.,

42 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

8.14 SLAB GRINDING Sqm 5.00 640.00

Providing & Slab Grinding in all floors using the proper grinders /
machine & the slab to be grinded as per the site condition where ever
required as per the architects instructions & engineer in charge.

8.15 WASH BASIN COUNTER sqm 6.50 15,900.00

Providing, fabricating & fixing washbasin counter formed out of 12mm
thick approved Solid acrylic surface with double layered 19mm thk
marine ply formed to double thick on the edges to form 40mm thick
curved faciaand 450mm deep fascia formed to shape polished to gloss
mounted over M.S bracket formed out of 6mm thick M.S sheet formed to
shape with 19mm thick marine ply backing, complete as per instruction
of the Architect's . Including the cost of cutting and polishing. Cost also
to include 200mm backspalash in 12mm thk Solid acrylic surface as per
the drawing and instructions of the Architect.

Consider Basic cost of 12mm thk Solid Acrylic @ Rs. 7500/sqm

8.16 WASH BASIN nos 5.00 21,900.00

Providing and fixing in position porcelain sanitary ware Wash Basin
under counter type , the wash basin shall be provided with CP WB
sinkcock (Sensored), CP stopcock with extension pipe, 32mm CP waste
coupling, CP bottle trap, angle valve the CP fittings will be of appproved
make and approved quality etc as instructed by the Architect.

Wash Basin : Hindware - Garnet - 10080

Waste Coupling : Jaquar - ALD - 709
Bottle Trap : Jaquar - ALD-CHR-7692
Angle Valve : Jaquar - OPL-CHR-15053
Sensor Tap:- Jaquar - SNR-CHR-51011

8.17 HAND DRIER Nos 2.00 18,900.00

Providing and fixing hand drier, Novatech or equivalent make as per
locations shown in the drawing etc complete as per the instructions of
architect

8.18 TISSUE PAPER DISPENSER Nos 2.00 4,980.00

Providing and fixing Tissue Paper Dispenser, Nova Tech - NTP - 01
make as per locations shown in the drawing etc complete as per the
instructions of architect

8.19 SOAP DISPENSER - Counter Mounted Nos 4.00 5,470.00

Providing and fixing counter monted Soap dispenser unit of Nova Tech
- NT-CMLSD make as per locations shown in the drawing etc complete
as per the instructions of architect

8.20 WATER HEATERS Nos 2.00 12,790.00

43 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Sl.no Description Unit Qty Rate

Providing & fixing 25 ltr Storage type Water Heaters of approved

shade with copper container, glasswool insulation, stove enamelled M.S.
jacket, thermostatically controlled inner heater with pilot neon lamps,
angle valve on inlet connection, 15 mm dia C.P. fllexible connection pipe
in inlet and outlet sutaible for for working pressure of 6 kg/cm²
complete as required

8.21 NERALI TRAP Nos 11.00 985.00

Providing & Fixing PVC trap of 100mm dia, of self cleaning design with
screwed down or hinged grating with or without vent arm including
cutting and making good the walls and floors, cost of materials, labour,
testing, complete as per specifications and instructions of the Engineer
in-charge.

8.22 C.P GRATING Nos 11.00 935.00

Providing and fixing CP Grating kohler or equivalent make as per
locations shown in the drawing etc complete as per the instructions of
architect

8.23 HOUSE KEEPING - DEEP CLEANING ONLY AT FINAL STAGE LS 1.00 395,000.00
Providing house-keeping support with General House keeping for the
entire site including clearing of wastes out of the premesis in regular
basis inclusive of all dedicated labour and supervisory personnel at all
times of work, across the entire facility. Cost to include all equipment,
consumables(Industrial type vaccum machine(Dry& wet),mop
stick,broom stick)Minimum of 10 housekeeping labours with 1
supervisor, protective and safety measures, etc. complete. The site
shall be kept clean to the complete satisfaction and based on
instructions from the Project Managers.

Note : separate attendance register to be maintened for

housekeeping and to get signoff from PM .

SUB TOTAL CARRIED TO SUMMARY

44 RC Design Pvt Ltd

 Project: Interior for GE Digital @ ChennaiOwner : GE Digital

TIES FOR INTERIOR FIT OUT

Amount

946,000.00

432,600.00

123,750.00

45 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

291,900.00

612,750.00

1,589,775.00

46 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

191,750.00

35,190.00

47 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

20,250.00

266,800.00

50,000.00

117,800.00

48 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

4,678,565.00

84,000.00

49 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

337,500.00

50 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

92,020.00

51 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

2,866,820.00

51,750.00

52 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

467,400.00
1,303,800.00

480,000.00

53 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

164,700.00

54 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

5,847,990.00

9,870.00

255,000.00

55 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

366,000.00

2,575.00

560,000.00

15,225.00

87,000.00

56 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

65,190.00

662,625.00

21,880.00

57 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

256,000.00

194,700.00

58 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

164,100.00

189,475.00

438,400.00

59 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

303,050.00

623,450.00

60 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

172,200.00

780,750.00

272,655.00

61 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

286,160.00

62 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

398,475.00

377,600.00

63 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

138,600.00

30,800.00

26,625.00

64 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

6,698,405.00

132,900.00

39,400.00

100,200.00

65 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

37,500.00

310,000.00

44,250.00

66 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

54,100.00
137,710.00

270,490.00

67 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

3,000.00

21,300.00

4,775.00

13,700.00

3,320.00

68 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

13,280.00

1,000.00

21,300.00

4,775.00

13,700.00

3,320.00

4,500.00

7,770.00

984.00

21,252.00

4,771.00

13,692.00

3,320.00

4,500.00

47,214.00

69 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

41,300.00

70 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

45,437.70

51,900.00

71 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

341,500.00

437,200.00

72 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

19,675.00

27,740.00

34,440.00

40,040.00

73 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

492,000.00

63,900.00

59,000.00

47,200.00

74 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

11,800.00
1,280.00

72,800.00

83,700.00

75 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

49,200.00

54,650.00

2,692,785.70

76 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

174,000.00

1,339,500.00

449,400.00

77 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

1,962,900.00

190,000.00

12,000.00

7,870.00

62,700.00

2,700.00

78 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

9,850.00

14,800.00

49,200.00

19,675.00

39,350.00

182,000.00

18,000.00

12,300.00

86,250.00

49,200.00

79 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

49,200.00

47,970.00
49,200.00

17,200.00

41,280.00
18,500.00

123,000.00

80 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

123,000.00

24,590.00

19,700.00

33,660.00

32,460.00

81 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

415,200.00

34,040.00

7,400.00

10,500.00

82 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

141,840.00

2,355.00

16,550.00

3,465.00

49,600.00

2,016,605.00

2,500.00

2,500.00

790.00

83 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

2,740.00

591,500.00

189,000.00

84 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

54,950.00

20,650.00

44,800.00

20,340.00

6,890.00
5,900.00

85 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

3,200.00

103,350.00

109,500.00

37,800.00

9,960.00

21,880.00

25,580.00

86 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

10,835.00

10,285.00

395,000.00

1,669,950.00

87 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

BILL OF QUANTITIES

SL.N
DESCRIPTION UNIT QTY RATE Rs. AMOUNT Rs.
O
1.00 ROLLER BLINDS - with Spring Booster System sqm 577.00 1,129.00 651,433.00
Providing & fixing in position Roller Blinds of
approved shade with following technical
specification.

Mechanism details:
Operation: Manual roller
Roller tube: Shall be extruded aluminium. The
outside diameter of the tube shall be 25mm or
34mm depending upon the application.

Chain Drive Unit: Shall be of a high engineering

grade moulded plastic with steel support pin
enclosed in a plastic housing, and inserted into a
control tube end. It shall be driven a ball chain pulley
attached to a specially designed clutch mechanism,
forming a continuous loop. It can be positioned on
the left or right hand side of the shade. The shade
when lowering or raising shall be automatically
locked in position upon release of the ball chain by
the clutch with its built in friction lock.

Chain Drive Idler end: Shall be of moulded plastic

with a steel location pin enclosed in a plastic
housing. The plug shall be inserted into the tube
end.

Chain Drive installation Brackets: The

installation brackets shall be Zinc plated steel
supplied in pairs. One bracket in each pairs is used
for the control side of the shade (side with the ball
chain). The other bracket is used for the rotator or
idler end side.

Ball Chain: Shall be 2mm Diameter PVC cord with

3mm diameter acetal balls moulded co-axially to it
on 7.5mm pitch to form a continuous loop. It is used
for raising or lowering the shade.

Bottom rail: shall be round aluminium tube,

anodized, with a diameter of 20mm & thickness of .
5mm

Fabric specification:
Fabric description : Combine visual comfort and
thermal performance - Screen fabric for internal
roller blinds - Two sides, two functions to combine
visual comfort and thermal performance.

Fabric Weight ( g/m2 ) : 475 g/m2 +/- 10%

88 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Composition : 84.5% PVC , 15.5% Polyester

Light Fastness : 7/8
Fabric width : 250 cm
Rubbing fastness : Dry
Fire rating : NFPA 701
Moisture Resistance : Yes
Openness factor : 3%
Fabric Descreption : SCREEN VISION 8%
Weave : Basket weave 2/2
Thickness of fabric : 0.55mm +/-5%
Consider the Basic Cost @ Rs . 900 / sqm

ROLLER BLINDS - with Spring Booster System - sqm 10.00 1,696.00

2.00 Blackout
16,960.00
Providing & fixing in position Roller Blinds of
approved shade with following technical
specification.

Mechanism details:
Operation: Manual roller
Roller tube: Shall be extruded aluminium. The
outside diameter of the tube shall be 25mm or
34mm depending upon the application.

Chain Drive Unit: Shall be of a high engineering

grade moulded plastic with steel support pin
enclosed in a plastic housing, and inserted into a
control tube end. It shall be driven a ball chain pulley
attached to a specially designed clutch mechanism,
forming a continuous loop. It can be positioned on
the left or right hand side of the shade. The shade
when lowering or raising shall be automatically
locked in position upon release of the ball chain by
the clutch with its built in friction lock.

Chain Drive Idler end: Shall be of moulded plastic

with a steel location pin enclosed in a plastic
housing. The plug shall be inserted into the tube
end.

Chain Drive installation Brackets: The

installation brackets shall be Zinc plated steel
supplied in pairs. One bracket in each pairs is used
for the control side of the shade (side with the ball
chain). The other bracket is used for the rotator or
Ball Chain: Shall be 2mm Diameter PVC cord with
idler end side.
3mm diameter acetal balls moulded co-axially to it
on 7.5mm pitch to form a continuous loop. It is used
for raising or lowering the shade.

Bottom rail: shall be round aluminium tube,

anodized, with a diameter of 20mm & thickness of .
5mm

Fabric specification:

89 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Fabric description : Combine visual comfort and

thermal performance - Screen fabric for internal
roller blinds - Two sides, two functions to combine
visual comfort and thermal performance.

Fabric Weight ( g/m2 ) : 475 g/m2 +/- 10%

Composition : 84.5% PVC , 15.5% Polyester
Light Fastness : 7/8
Fabric width : 250 cm
Rubbing fastness : Dry
Fire rating : NFPA 701
Moisture Resistance : Yes
Openness factor : 0%
Fabric Descreption : 100% Blackout
Weave : Basket weave 2/2
Thickness of fabric : 0.55mm +/-5%
Consider the Basic Cost @ Rs .1250 / sqm

TOTAL 668,393.00

90 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

BILL OF QUANTITIES FOR KITCHEN EQUIPMENTS

Code Specification Qty LxBxH Rate

SS HOT BAIN MARIE WITH 7 NO'S OF GN PANS, SS

1.00 TRAY SLIDE & 1 2500 X 650 x 850 159,015.00
TOP ACRYLIC CANOPY.

SS HOT BAIN MARIE WITH 4 NO'S OF GN PANS, SS

2.00 TRAY SLIDE & 1 1500 X 650 x 850 111,803.00
TOP ACRYLIC CANOPY.

3.00 Plate Racks 3 500 x 500 x 100mm 4,368.00

4.00 Cutlery Racks 3 500 x 500 x 100mm 4,368.00

5.00 Dishwasher machine MEIKO make 1.00 No 472,118.00

Single hood dishwasher machine with upper and

lower stainless still wash and rinse system and
Electronic program selection from touch sensitive
control panel and temperature display for wash and
final rinse water Self-cleaning program cycle after
drain down Hood open to the rear eliminates vapour
emission towards wash-up staff soft start feature on
wash pump (option) 3 programmes (90 / 120 / 240
sec.) Technical temperature indication for wash and
rinse temperatures

Technical specification
Washing cycle capacity per sec 90/120/140

91 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Code Specification Qty LxBxH Rate

Capacity 40/30/15 baskets of washing per hour
Pump motor 0.75 Kw
Tank content : 22litre
Final rinse 3litres/baskets
Built in boiler 10C inlet temperature

6.00 Unloading Landing Table 1 1100 x 750 x 850 + 150 29,833.00

Unloading Landing Table , 16g SS top, provision to
hook with dish washer, 510mm wide sliding passage
for trays, 150mm rear splash, 25mm sq pipe cross
supprt, 38mm sq legs fitted with adjustable nylon
bullet feets.

Loading Table with 1 Sink, 16g SS top, provision to

hook with Dish washer, 510mm wide sliding passage
for trays, Sink of size 450 x 450 x 300mm deep,
7.00 1 1100 x 750 x 850 + 150 38,522.00
150mm rear splash, 25mm sq pipe cross supprt,
38mm sq legs fitted with adjustable nylon bullet
feets.

8.00 CLEAN PLATE STORAGE RACK WITH 5 SHELVES 2 1500 X 600 X 1800 47,212.00

Glass Racks
9.00 2 500 x 500 x 100mm 4,368.00
73 x 73mm for 36 Glasses (6 X 6)

10.00 Water Softener AT23 1 275 x 450 x 810mm 142,937.00

Fully Automatic Water Softner,

Make : European Water Care Systems, U.K.
capacity of 3000 Ltrs between regenration @
Hardness of 300ppm.
Salt required per regeneration is about 8Kg
Water Consumption per regeneration is about 35 Ltrs

TOTAL

92 RC Design Pvt Ltd

 Project: Interior for GE Digital @ ChennaiOwner : GE Digital

IES FOR KITCHEN EQUIPMENTS

Amount

159,015.00

111,803.00

13,104.00

13,104.00

472,118.00

93 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Amount

29,833.00

38,522.00

94,424.00

8,736.00

142,937.00

1,083,596.00

94 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

1 All chasing in wall for CPVC / GI pipes shall be carried out by electric chasing machine.
2 Any bore to be done in RCC wall, slab and beams shall be done by core cutting machine.
3 Rate only(RO)items have been given in lieu of considering the same on any revisions in Design/as by
4 client.
The items have been segregated as supply and installation to facilitate the scope to be decided by the
5 arch / clientshall include cutting in walls and making good the walls & floors. Size of wash basin
The works
55 x 40cm.(Granite / Marble counter will be installed by other agency)
6 Wall chasing shall be done with chasing machine to required lines and levels.
7 Sanitary ware and CP fittings model numbers to be confirmed by architects / Clients
8 water proofing in toilets not considered in our BOQ.
9 Terrace floor water proofing for toilet area not considered.

SL.
DESCRIPTION UNIT QTY RATE AMOUNT
NO.

SECTION - A : CPVC PIPES AND FITTNGS (INTERNAL TOILETS AND KITCHEN WATERSUPPLY):
01 Supplying & fixing of CPVC pipes confirming to ASTM
standard including all CPVC fittings like tees, elbows,
bends, unions, coupling, reducer tees, collars etc. The work
shall include cutting jointing with solvent cement pressure
testing the joints pipeline for 10 kg/sq.cm hydraulic
pressure, for 2 hours hours etc., fixed on to the wall in
vertical shafts/including making good the walls and floors.

Make : Astral or Ashirvad

COLD WATERSUPPLY ( KITCHEN Lines)
a) 20 mm dia Supp Mtr. 35 352 12320

b) 25 mm dia Supp Mtr. 18 452 8136

c) 32 mm dia Supp Mtr. 30 552 16560

e) 50 mm dia Supp Mtr. 0 954

INTERNAL (CONCEALED IN WALL & CEILING PIPING):

HOT WATERSUPPLY ( Use SDR-11 grade )

a) 20 mm dia Supp Mtr. 25 352 8800

1A Supplying & fixing of elastomeric insulation for concealed

hot water cpvc sCH -11 pipes running in toilets with
VIDOFLEX 6 mm thick preformed tubings wrapped all
round. All joints shall be sealed with POLYBOND V9
adhesive, followed by application of self adhesive black
cotton tape PCS 2250, on both longitudinal &
circumferencial joints to give uniform appearance and
finish etc., complete.

a) 20 mm dia Supp Mtr. 30 175 5250

95
Project: Interior for GE Digital @ ChennaiOwner : GE Digital

SL.
DESCRIPTION UNIT QTY RATE AMOUNT
NO.
02 Supplying and fixing of CPVC ball valves with knob
operated and tested to 20kg / sq.cm.

Make : Astral or Ashirvad

b) 20 mm dia Supply & Fixing Nos. 1 1004 1004

c) 25 mm dia Supply & Fixing Nos. 1 1506 1506

e) 32 mm dia Supply & Fixing Nos. 1 2007 2007

03 Supplying and fixing of brass body nickel plated automatic

air release valves with brass splindle, NBR and join
franiteelastomer,staniless steel spring polypropylenic float
at the top most points of watersupply distribution
ringmain.

a) 20 mm dia Supply & fixing Nos. 02 2509 5018

04 Supplying and fixing of MS brackets fabricated out of L- Kgs. 15 151 2265

angle/ flats of required sizes with 6mm / 8mm GI 'U'
clamps GI washers for clamping CI / GI / PVC pipes
running in service 6mm / 8mm dia full threaded GI rod
with necessary GI washers and nuts etcfloor/basement
floor. The work shall include grouting in RCC slabs,
masonry walls with cement concrete and making good.

05 Supplying and fixing 6mm / 8mm dia Anchor fasteners for Nos. 5 502 2510
suspending GI rods for pipe bracket support etc., complete.
(Hi - tech make)

06 Making of holes in RCC beams and slabs of required size

for routing water supply lines to toilets and including
packing to boreneetly with concrete and making good the
wall and floor.

a) 100mm dia Nos. 01 2509 2509

b) 150mm dia Nos. 01 3011 3011

Make : RB/ Standard

Supplying, fixing, testing and commissioning of water Nos 02 10037 20074
meter confirming to IS 2372 - 1981, dasmesh make with
direct reading dia in KL with all integral parts of gun metal
06 or brass with neccesary fitting such as threaded pieces,
unions, check nuts complete.

Make : RB/ Dashmesh

TOTAL 90970

SECTION - B: PVC SOIL,WASTE,VENT PIPES AND FITTINGS ( INTERNAL & EXTERNAL)

96
Project: Interior for GE Digital @ ChennaiOwner : GE Digital

SL.
DESCRIPTION UNIT QTY RATE AMOUNT
NO.
01 Supplying , fixing, testing and commissioning of PVC soil,
waste and vent pipe confirming to IS 13592 of SWR
quality 6 kg / sq.cm pressure rated self fit type with socket
and solvent cement joint including all fittings, like Bends,
Tees, Elbows, Collars, junction, inspection doors, cowls,
offsets, access pipes, jointing with solvent cement followed
by application of leak proof adhesive concrete 1:2:4 as
applicable, curing etc., complete.( Interal toilets &
kitchen)

MAKE : SUPREME/ASHIRVAD PIPES

INTERNAL:
a) 75mm dia 6kg

Supply & Fixing Mtr. 30 803 24090

b) 110mm dia 6Kg

Supply & Fixing Mtr. 30 1406 42180

2 Supplying , fixing, testing and commissioning of PVC
multi inlet floor trap of self cleansing design moulded.
With complete works

a) 110mm dia inlet 75mm dia out let

Supply & Fixing Nos. 0 2007

MAKE : SUPREME/ASHIRVAD PIPES
3 Supplying and fixing PVC `P' trap of self cleansing design
with or without vent arm complete including cutting and
making good the walls and floors.

a) 110mm dia inlet 110mm dia out let

Supply & Fixing Nos. 5 1004 5020

4 Supplying and fixing CP grating of 6mm thick with rim

including setting in floor with white cement mortar and
making good the floor

a) 125mm dia Nos. 0 1004

Supply & Fixing
5 Supplying and fixing testing and commissioning of PVC
waste pipe of agricultural sereis confirming to IS 4985
including all fittings like tees, elbows, bends, collars with
complete pasting and checking and finishing

a) 40 mm dia (15kg / sq.cm)(Washbasin) Supply & Fixing Mtr 25 352 8800

b) 50 mm dia (15kg / sq.cm) (Potwash) Supply & Fixing Mtr 15 401 6015

97
Project: Interior for GE Digital @ ChennaiOwner : GE Digital

SL.
DESCRIPTION UNIT QTY RATE AMOUNT
NO.
6 Supply, installation, testing & commissioning of Oil/Grease Nos 2 67124 134248
separator ECO-MOBILE TYPE-0.5 with sludge trap according
to DIN EN 450, for free standing installation, of
polyethylene, material LLD-PE, with grease storage
capacity 20 litres, total wastewater capacity 200 litres,
with direct suction, with connecting flange DN 100 PN 10
For local suction line R 2 1/2”, with fire hose quick coupling
B with 2 odour proof maintenance openings, inlet and
outlet DN 100. With Inspection Windows & Filling Device.
(Make: ACO ). The rate shall include necessary, Knife
edged Bypass valves of 3 No., piping et, complete

TOTAL 220353

SECTION - A : CPVC PIPES AND FITTNGS (INTERNAL AND EXTERNAL WATERSUPPLY): 90,970.00

SECTION - B : PVC SOIL,WASTE,VENT PIPES AND FITTINGS ( INTERNAL & EXTERNAL) 220,353.00

TOTAL 311,323.00

EXCLUSIONS
1 Kitchen equipments Not considered
3 considered tapping line from the existing duct
4 RO water unit not considered, it will be in the scope Kitchen consultant
5 Kitchen SS drain works are not considered

98
Project: Interior for Mediatek @ RMZ Eco World , BangaloreOwner: Mediatek

BILL OF QUANTITIES FOR SIGNAGE WORKS

TYPE OF
SL.NO. DESCRIPTION UNIT Total Qty SIZE RATE
SIGNAGE
Providing & fixing in position Signages with the following
specifications.
1.00 Workstations Nos R/o Mounted 250 x 50mm 2,509.00
Providing and fixing signage with 2mm thk Acrylic casing with 1mm thk ACP
plate with Black vinyl sticker names fixed on the surface with Birla 3M
double sided sticker as per the approved sample.

2.00 Office Area Signages Nos 22.00 Mounted 300 x 75mm 465.00
Providing and fixing signage with 2mm thk SS brush finished plate with Black
vinyl sticker names fixed on the door with Birla 3M double sided sticker as
per the approved sample.

3.00 Rest Room ( Gents , Ladies & Handicap) Nos 3.00 Mounted 130x 150mm 372.00
Providing and fixing signage with 3mm thk ACP Sheet SS brush finished
plate with SS Symbol fixed with Birla 3M double sided sticker as per the
approved sample.

4.00 Push & Pull Signage on Glass Door Nos 8.00 Mounted 100 x 50mm 279.00
3mm thk brushed finished logo with viny sticker fixed with screws. as per
approved sample.

5.00 Rest room way indicator Nos suspended 150mmX 300mm 743.00
3.00 from the false
ceiling
Providing signage of 3mm thk SS brush finish ACP/Sunboard with vinyl
sticker on both sides as per design . Signage to be suspended from false
ceiling using SS chain, as per image attached.

6.00 Emergency Exit Nos suspended 150mmX 300mm 1,756.00

R/o from the false
ceiling
Providing & Fixing Emergency Exit signage , Power lit as per the Image

99 RC Design Pvt Ltd

Project: Interior for Mediatek @ RMZ Eco World , BangaloreOwner: Mediatek

7.00 Company logo Nos 1.00 43,680.00

Company Name Signage as per design- Reception
Providing and fixing sinage  1nos of  size 1' High letters with Logo-  will have
CNC cutout Acrylic Letters with Back light 

TOTAL WITHOUT TAXES

100 RC Design Pvt Ltd

 Project: Interior for Mediatek @ RMZ Eco World , BangaloreOwner: Mediatek

TIES FOR SIGNAGE WORKS

AMOUNT REFERENCE IMAGE

10230

1116

2232

2229

101 RC Design Pvt Ltd

Project: Interior for Mediatek @ RMZ Eco World , BangaloreOwner: Mediatek

43680

59,487.00

102 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

Note:
The following is the list of approved make/brand against each product. Where more than one
brand has been specified, the names are given in order of preference. Contractor is to quote rates
based on the materials of 'first preference' after ascertaining availability, delivery schedules and
other parameters affecting delivery. Unless the Contractor stipulates to the contrary in his tender, it
shall be assumed that the rates quoted are for materials of first preference.

In the event that the Contractor is permitted to use materials of a lower preference due to valid
reasons then the contract rates shall be adjusted pro-rata on the basis of valuation of first
preference materials. In the event that the prices are higher than that of first preference materials
then the Owner is not liable to make any enhanced payment towards that item of work.

APPROVED MAKES OF MATERIAL

SL.N VENDORS
ITEM DETAILS
O. CONFIRMATION

1 TIMBER AS APPROVED ( BASIC

RATE = Rs. 1800/- PER CFT
) Sal wood

2 PLYWOOD CENTURY
COMMERCIAL
GRADE
GREENPLY

ARCHID PLY

APPROVED EQUALENT

3 PLYWOOD CENTURY
MARINE GRADE

GREENPLY

ARCHID PLY

APPROVED EQUALENT

4 DECORATIVE GREENLAM
LAMINATES

MERINO

ARCHIDPLY

APPROVED EQUALENT

103 RC Design Pvt Ltd

 4 DECORATIVE
Project: Interior for GE Digital @ ChennaiOwner : GE Digital
LAMINATES

APPROVED MAKES OF MATERIAL

SL.N VENDORS
ITEM DETAILS
O. APPROVED EQUALENT CONFIRMATION

5 WOOD VENEER TIMEX ( veneer )

JACKSON ( veneer )

URO ( veneer )

6 SOFTBOARD CELOTEX OR APPROVED

EQUIVALENT

7 GLASS, SAINTGOBAIN
MIRROR

ASAHI

MODI FLOAT

7a LAQURED SAINTGOBAIN
GLASS

ASAHI

APPROVED EQUALENT

8 HERMETICALLY IMPACT SAFETY GLASS

SEALED
DOUBLE
GSCTOUGHENED GLASS,
GLAZING
NOIDA

TUFFGLAZE INDIA Pvt Ltd,

NAVI MUMBAI

9 ACRYLIC ASIAN PAINTS

EMULSION
PAINT
BERGER

SHERWIN WILLIAMS

APPROVED EQUALENT

10 SYNTHETIC ASIAN PAINTS

ENAMEL
ICI DULUX

BERGER

104 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

APPROVED MAKES OF MATERIAL

SL.N VENDORS
ITEM DETAILS
O. CONFIRMATION

11 TEXTURED OIKOS
PAINT
SPECTRUM HERITAGE

ARMOUR COAT

12 AUTOMOTIVE ICI
PAINT
ASIAN

BERGER

13 ANTI-TERMITE WOOD CARE

PAINT
WOOD GUARD

APPROVED EQUALENT

14 MELAMINE MRF
POLISH
LIGHT HOUSE

SHEENLAC

APPROVED EQUALENT

15 PATCH DORMA
FITTINGS

GEZE

ASSABLOY

APPROVED EQUALENT

17 FLOOR SPRING DORMA

GEZE

ASSABLOY

APPROVED EQUALENT

105 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

APPROVED MAKES OF MATERIAL

SL.N VENDORS
ITEM DETAILS
O. CONFIRMATION

18 FLOOR SPRING DORMA

FOR OTHER
DOORS
GEZE

ASSABLOY

APPROVED EQUALENT

19 EXPOSED / DORMA
CONCEILIED
DOOR CLOSER
GEZE

ASSABLOY

APPROVED EQUALENT

20 BEARING DORMA
HINGES
UNION

GEZE

APPROVED EQUALENT

21 MORTISE DORMA
HANDLE

GEZE

ASSABLOY

APPROVED EQUALENT

22 DEAD LOCK DORMA

GEZE

ASSABLOY

APPROVED EQUALENT

106 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

APPROVED MAKES OF MATERIAL

SL.N VENDORS
ITEM DETAILS
O. CONFIRMATION

23 MORTISE LOCK DORMA

CYLINDER

GEZE

ASSABLOY

APPROVED EQUALENT

24 PATCH DOOR DORMA

HANDLE

GEZE

ASSABLOY

APPROVED EQUALENT

25 FLOOR DORMA
MOUNTED
DOOR STOPPER
GEZE

ASSABLOY

APPROVED EQUALENT

26 CONCEALED DORMA
TOWER BOLT

GEZE

UNION FB 10 SS

27 TOILET DOOR DORMA

INDICATOR
BOLT
GEZE

KICH IB 106 SS

28 MULTI- DORSET MP 300 SS WITH

PURPOSE LOCK 3 KEYS

GODREJ
EBCO

107 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

28 MULTI- APPROVED MAKES OF MATERIAL

PURPOSE LOCK

SL.N VENDORS
ITEM DETAILS
O. EBCO CONFIRMATION

29 CABINET HINGE HAFELE

(AUTO BLUM
CLOSING)
EBCO

30 DRAWER SLIDE HAFFLE

SYSTEM
(TELESCOPIC
CHANNEL) BLUM

EBCO

31 AUTO DOOR HAFELE

BOLT
BLUM

EBCO

32 CABINET HAFLE
HANDLES 96 BLUM
MM

EBCO

33 SCREWS
JOINERY WORKS NETTLEFOLD IS 1365, GI
screws

HARDWARE, SS STAR HEAD SCREW AS

FITTINGS PER MANUFACTURERS
SPECIFICATION
34 FOAM RUBBER U FOAM

KURLON

MM FOAM

35 VITRIFIED EURO
TILES
NITCO

KHAJARIA

JOHNSON

DURATO

108 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

APPROVED MAKES OF MATERIAL

SL.N VENDORS
ITEM DETAILS
O. CONFIRMATION

36 SILICON DOW CORNING

SEALANT

HILTI

ARDEX

37 GREY CEMENT L&T 43 GRADE

CORAMANDAL 43 GRADE

BIRLA 43

38 WHITE CEMENT JK WHITE CEMENT

BIRLA WHITE

APPROVED EQUALENT

39 FROSTED FILM 3M
LUMAR
ULTRAMARK

APPROVED EQUALENT

40 COMPOSITE ALUCOBOND
ALUMINIUM
INTERIOR
TIMEX BOND
GRADE ( 3MM
THICK )

EURO BOND

41 FABRIC ATMOSPHERE AS PER APPROVED

SAMPLE ( BASIC RATE
Rs.1000/- 3800 /- PER
TITCH

DDECOR

42 FIBRE GLASS UP TWIGA

WOOL

KIMCO

ROCKWOOL

109 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

APPROVED MAKES OF MATERIAL

SL.N VENDORS
ITEM DETAILS
O. CONFIRMATION

43 110 DEG EBCO

OPENING AUTO
CLOSING
HINGES HAFELE

BLUM

44 OIL BASED ASIAN

DISTEMPER

ICI

BERGER

45 STAINLESS SAIL STEEL 304 GRADE

STEEL
JINDAL

ESSAR

46 ANTI-STATIC TARKETT
VINYL
FLOORING
ARMSTRONG

GERFLOR

47 VINYL FILM 3M

LUMAR

LG

48 ALUMINIUM JINDAL
SECTIONS

INDAL

APPROVED EQUALENT

49 GI SECTION INDIA GYPSUM

FOR
PARTITIONS &
FALSE CEILING LAGYP

110 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

49 GI SECTION APPROVED MAKES OF MATERIAL

FOR
PARTITIONS &
SL.N FALSE CEILING VENDORS
ITEM DETAILS
O. CONFIRMATION
DIAMOND FRAMES

50 GLASS MOSAIC TILE ITALIA

PALLADIO

APPROVED EQUALENT

51 FALSE UNITED INSULATION

FLOORING

TESCO

UNICOS

APPROVED EQUALENT

52 ALUMINIUM BOTTOM LINE

SKIRTING
TESCO

INSIDE SPACES

53 WALL PAPER ARTE

ENGRAPHICS

MARSHALL

APPROVED EQUALENT

54 WATER FOSROC
PROOFING
SIKA INDIA PVT.LTD

PIDLITE

ARDEX

55 ROLLER BLINDS LOUVERLINE

WALL TRACTS

111 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

APPROVED MAKES OF MATERIAL

55 ROLLER BLINDS
SL.N VENDORS
ITEM DETAILS
O. WALL TRACTS CONFIRMATION

HUNTER DOUGLAS

VISTA

56 MODULAR GRID AMF

CEILING

ARMSTRONG

USG

57 SANITARY KOHLER
& CP FIXTURES
GROHE

AMERICAN STANDARD

ROCA

APPROVED EQUALENT

58 GYPSUM INDIA GYPSUM

BOARD

LAGYP

BORAL BOARDS

59 GLASS INTACT
PARTITION
SYSTEM
DEKO

ALLOY

CITTERIO

60 SLIDIDNG DORMA
FOLDIGN
PARTITION
HAFFLE

HUFCOR

112 RC Design Pvt Ltd

Project: Interior 60
for GE Digital @ ChennaiOwner : GE Digital
SLIDIDNG
FOLDIGN
PARTITION
APPROVED MAKES OF MATERIAL

SL.N VENDORS
ITEM DETAILS
O. CONFIRMATION
GEZE

61 EPOXY ROFF
FLOORING

FOSROC

APPROVED EUQUIVALENT

62 EXPANDED HUNTER DOUGHLAS

METAL CEILING

LD2 TECHNOLOGIES

LINDNER

APPROVED EUQUIVALENT

63 BAFFLE HUNTER DOUGHLAS

CEILING
LD2 TECHNOLOGIES

FAME LINE

FLOOR JINNI

64 PVC STRETCH EUROCELI

FABRIC CEILING

BARRILUX

BARRISOL

65 FIRE RATED SHAKTIMATE

DOOR
MPP DORTEC

PROMAT

66 AUTOMATIC DORMA
SLIDIDNG
DOOR
GEZE

STANLEY

113 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital
66 AUTOMATIC
SLIDIDNG
DOOR APPROVED MAKES OF MATERIAL

SL.N VENDORS
ITEM DETAILS
O. STANLEY CONFIRMATION

67 SOLID SURFACE DUPONT - CORIAN

HANEX

LG

APPROVED EUQUALENT

73 TENSILE FERRARI
FABRIC

VISTA

APPROVED EUQUALENT

68 SS SINK WITH NIRALI

DRAIN BOARD

FUTURA

FRANKY - FABER

APPROVED EUQUALENT

69 COMPACTORS GODREJ

SAFEGUARD SYSTEM

METHODEX

70 SLOTTED GODREJ
ANGLE
STORAGE
PAN INDIA SYSTEMS

APPROVED EUQUALENT

114 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

GENERAL NOTES COVERING BILL OF QUANTITIES

a Rates quoted must have full compliance with the following including the cost of grey cement, and
white cement.

b The owner reserves the right to supply or issue price basis for any material item.

c The owner reserves the right to 'lend' his name for all imported items in order to avail any possible
duty exemptions and the said benefit shall go to the owner.

d The items which are supplied free of cost need to be reconciled at the end of the project based on
material constants.

e Special attention to be paid to Technical specifications.

f Basic rate shall not include all taxes, delivery, handling charges, wastage & delivered at site.

Notes: The contractor is to note and allow the following preambles in his scope of work.

1 CARPENTRY, JOINERY WORKS

a. Unless otherwise specified the rates quoted shall be inclusive of the following ~ Cost of material,
taxes, transport, labour, overheads and profit & complete finishing etc.,

b. All internal woodwork shall be treated with anti termite and fire retardant paint

c. All internal surfaces of cabinets, etc in conventional carpentry works shall be finished with 0.8mm
thick matt finished laminate of approved shade

d. All under surfaces of furniture (tables, counters, etc) to be finished with 0.8mm thick matt finished
laminate of approved shade

e. All exposed horizontal laminated surfaces shall be finished with 1mm thick laminate of approved make
shade unless otherwise specified.

f. All exposed vertical laminated surfaces shall be finished with 1.0mm thick laminate of approved make
shade unless otherwise specified.

g. All exposed veneer shall be group matched natural cut plain veneer of approved make and shade.

h. All exposed veneered, wood surfaces shall be finished with matt melamine polish to approved shade.

I. All exposed edges of plywood, blockboard etc shall be finished with 3mm thick lipping beading of
specified wood.

j. All plywood, blockboard for office areas shall be water resistant, termite/borer proof commercial grade
of specified make.

k. All plywood, blockboard for wet areas (toilets/pantry) shall be termite/borer proof and waterproof
marine grade of specified make.

l. Timber used shall be kiln seasoned and should be free from shrinkage, warpage even after fabrication
of furniture.

m. Provision to be made for additional supports and reinforcement that may be required for stability and
evenness at where curved partition is constructed.

n. Contractor to make provisions of all necessary scaffoldings to facilitate high level installations.

115 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

GENERAL NOTES COVERING BILL OF QUANTITIES

o. Contractor to form openings on partition for services and to seal gaps using silicon sealant.

p. Where the use of spring loaded auto closing hinges is specified, the same shall be installed strictly as
per manufacturers guidelines and relevant tools required for the same.

q. All items to have sample approved prior to commencement of mass production.

r. All screws seen out side should be star SS.

s. Contractor to use the following screws unless otherwise specified.

For partition frame work : 16/8 no. sheet metal screw 16mm in length.

For partition anchoring on floor & true ceiling : 75/10 no. sheet metal screw 75mm in length.

For 6mm thick ply panelling 19/6 no. sheet metal flat head screw, 12mm thick ply panelling 25/8 no.
sheet metal flat head screw, for 19mm thick ply panelling 32/8 no. sheet metal screw.

For fixing door hinges : 30/8 no. Philip head SS screw.

For fixing drawer channel : For bottom channel - 19/6 no., For side - 9.5/6 no. sheet metal screw.

For fixing metabox drawer channel : 9.5/6 no. sheet metal screw.

For fixing auto closing hinge : 16/6 round philip head screw.

2 FLOORING WORKS

a. Receiving all materials supplied by the Owners / your vendors, unloading, storing at location specified
by the project manager. No additional payment will be paid for any increase lead from this location
conveying to work site & fixing in position. (If any materials supplied by Owner).

b All finished flooring shall be covered with plaster of Paris of 6mm thick over a plastic film without any
extra cost till handing over to the Owner.

c. Daily housekeeping of work areas which includes segregation of debris like cement based, plastic,
glass, wood and collecting in containers provided to/by you, at an acceptable location inside the site
premises.

d. Granite slabs should be free of all defects and all grains / patterns shall be properly matched from the
same lot. Any colour / lot variation shall be rejected.

e. The minimum quality benchmark will be decided by the Owner / Project management consultant /
Architect based on mock up samples before commencing the work.

f. Unless otherwise specified the rates quoted shall be inclusive of the following ~ Cost of material,
taxes, transport, labour, overheads and profit, etc.,

g. The basic rate of granite/marble includes supply, taxes and delivery to site, delivered and unloaded to
the point of cutting, the same. All granite material shall be "gang saw water cut".

116 RC Design Pvt Ltd

Project: Interior for GE Digital @ ChennaiOwner : GE Digital

GENERAL NOTES COVERING BILL OF QUANTITIES

h. No wastages shall be paid for seperately. The same shall be factored in the quoted rate.

I. If there is a reduction is the basic rate the cost for the same shall be adjusted pro rata in the quoted
rates. No increase in basic rates shall be allowed without written approval from the Architect.

j. Base sub-grade/sub-floor to be prepared by cleaning all dust/loose particles, caked mortar droppings,
etc by scrubbing with steel wire brushes. Surface to be roughened if so required and surface cleaned
with water and kept wet for minimum 12 hours.

k. Bedding layer of mortar to be provided as directed in the case of 19mm+ slabs to correct level, step as
instructed.

l. Finished work to be inclusive of cutting and polishing where specified/applicable.

m Contractor to be responsible for hiring/operating of all machines/equipment. Approval to be obtained

from Project Management consultant before operating.

n Finished floor must be cured by keeping wet for atleast 1 week after installation.

o Flooring to be cleaned, waxed or acid washed where applicable and as directed.

p Pointing to be done using matching coloured grout as specified/directed.

q All marble flooring/slabs to be polished using tin oxide only.

r Slurry for marble flooring to be of white cement only.

s In the instance of granite/marble floors, the contractor has to obtain prior approval on dry laying. Wet
laying to be carried out only on approval. Not extra cost shall be paid for dry laying.

117 RC Design Pvt Ltd

 Project: Interior for GE Digital @ ChennaiOwner : GE Digital

RING BILL OF QUANTITIES

with the following including the cost of grey cement, and

ssue price basis for any material item.

name for all imported items in order to avail any possible

go to the owner.

t need to be reconciled at the end of the project based on

ecifications.

ery, handling charges, wastage & delivered at site.

e following preambles in his scope of work.

ted shall be inclusive of the following ~ Cost of material,

ofit & complete finishing etc.,

anti termite and fire retardant paint

onventional carpentry works shall be finished with 0.8mm

hade

unters, etc) to be finished with 0.8mm thick matt finished

shall be finished with 1mm thick laminate of approved make

all be finished with 1.0mm thick laminate of approved make

d natural cut plain veneer of approved make and shade.

be finished with matt melamine polish to approved shade.

etc shall be finished with 3mm thick lipping beading of

all be water resistant, termite/borer proof commercial grade

ets/pantry) shall be termite/borer proof and waterproof

ould be free from shrinkage, warpage even after fabrication

rts and reinforcement that may be required for stability and

tructed.

sary scaffoldings to facilitate high level installations.

118 RC Design Pvt Ltd

 Project: Interior for GE Digital @ ChennaiOwner : GE Digital

RING BILL OF QUANTITIES

r services and to seal gaps using silicon sealant.

ng hinges is specified, the same shall be installed strictly as

tools required for the same.

commencement of mass production.

ess otherwise specified.

metal screw 16mm in length.

ng : 75/10 no. sheet metal screw 75mm in length.

metal flat head screw, 12mm thick ply panelling 25/8 no.
ck ply panelling 32/8 no. sheet metal screw.

d SS screw.

nnel - 19/6 no., For side - 9.5/6 no. sheet metal screw.

no. sheet metal screw.

hilip head screw.

wners / your vendors, unloading, storing at location specified

yment will be paid for any increase lead from this location
. (If any materials supplied by Owner).

plaster of Paris of 6mm thick over a plastic film without any

includes segregation of debris like cement based, plastic,

rovided to/by you, at an acceptable location inside the site

and all grains / patterns shall be properly matched from the

rejected.

decided by the Owner / Project management consultant /

e commencing the work.

ted shall be inclusive of the following ~ Cost of material,

ofit, etc.,

supply, taxes and delivery to site, delivered and unloaded to

material shall be "gang saw water cut".

119 RC Design Pvt Ltd

 Project: Interior for GE Digital @ ChennaiOwner : GE Digital

RING BILL OF QUANTITIES

he same shall be factored in the quoted rate.

e cost for the same shall be adjusted pro rata in the quoted
lowed without written approval from the Architect.

by cleaning all dust/loose particles, caked mortar droppings,

Surface to be roughened if so required and surface cleaned
ours.

directed in the case of 19mm+ slabs to correct level, step as

d polishing where specified/applicable.

erating of all machines/equipment. Approval to be obtained

e operating.

et for atleast 1 week after installation.

hed where applicable and as directed.

ed grout as specified/directed.

ng tin oxide only.

ment only.

e contractor has to obtain prior approval on dry laying. Wet

Not extra cost shall be paid for dry laying.

120 RC Design Pvt Ltd