Scribd
Upload
81 views9 pages

Critical State of Flow Is Characterized by

This document discusses critical flow in open channels. Critical flow occurs when the specific force and specific energy are at a minimum. It is characterized by a Froude number of 1 and an unstable water surface. Critical depth can be calculated through trial and error, graphically, or using dimensionless design charts. Critical flow is seen at broad-crested weirs, when a channel slope changes from mild to steep, and at free overfalls. The critical depth is used to determine discharge over a weir.

Uploaded by

MOHAMAMED BOSS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
81 views9 pages

Critical State of Flow Is Characterized by

This document discusses critical flow in open channels. Critical flow occurs when the specific force and specific energy are at a minimum. It is characterized by a Froude number of 1 and an unstable water surface. Critical depth can be calculated through trial and error, graphically, or using dimensionless design charts. Critical flow is seen at broad-crested weirs, when a channel slope changes from mild to steep, and at free overfalls. The critical depth is used to determine discharge over a weir.

Uploaded by

MOHAMAMED BOSS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

CRITICAL FLOW

Critical State of flow is characterized by

 Minimum Specific energy, dE/dy = 0


 Minimum Specific Force, dF/dy = 0
 Fr = 1
CRITICAL FLOW

 A flow near or at critical state is unstable and the


water surface appears wavy.
 A minor change in energy would cause a major
change in energy

Critical depth, yc : Depth of flow at critical state


Critical slope, Sc : The slope of the channel that
maintain the given discharge at critical state
OCCURRENCE OF CRITICAL
STATE OF FLOW

 Flow over a broad-crested weir


 When slope of the channel changes from a mild
one to a steep one
 At free overfall

H
yc yc yc

3 - 4 yc

broad-crested weir Mild slope change to steep Free overfall


SECTION FACTOR

FR  1 For critical state of flow

V
1
gD
A Q2 A
V g
2
2
g
T A T
Q2 A3 Section Factor for critical depth
 computation
g T
COMPUTATION OF CRITICAL
DEPTH
Methods
• Trial and error
• Graphical
• Dimensionless design chart (to simplify the computation
of critical depth for common channel shapes)

Dimensionless chart is a function


y Section Factor
vs
( width or diameter ) ( width or diameter ) 2.5
APPLICATION OF CRITICAL
STATE OF FLOW

Flow Measurement
If the depth of flow, yc, at the top of the weir can be
measured the discharge can be determined

q  gy c
3

Q  B gy c
3
B = width of the weir
Try an error
y A T Z=A3/T
0.00 0.00 6.00 0.00
0.20 1.28 6.80 0.31
0.40 2.72 7.60 2.65
0.60 4.32 8.40 9.60
0.80 6.08 9.20 24.43
1.00 8.00 10.00 51.20
1.20 10.08 10.80 94.83
1.40 12.32 11.60 161.20
1.60 14.72 12.40 257.22
1.80 17.28 13.20 390.89
2.00 20.00 14.00 571.43
Graphical Method

2.50

2.00

1.50
y

1.00
Yc

0.50

0.00
0.00 100.00 200.00 300.00 400.00 500.00 600.00
Q2/g=Z Z=A3/T
APPLICATION OF CRITICAL
STATE OF FLOW
Design height of broad crested weir
The minimum height, zc, is usually taken as the
weir height so as to produce a critical depth at its top
and to prevent back water situation.

Critical depth at its top is desirable in a case where the


discharge needs to be determined.
If z< zc, critical depth will not occur

If z> zc, critical depth will occur, but the height is too
big which cause backwater and might cause flooding at
upstream end.

You might also like