www.android.previousquestionpapers.com | www.previousquestionpapers.com | www.ios.previousquestionpapers.

com

Code No: RT32041 R13 SET - 1

III B. Tech II Semester Regular/Supplementary Examinations, April - 2018

MICRO PROCESSORS AND MICRO CONTROLLERS
(Common to Electronics and Communication Engineering, Electronics and Instrumentation
Engineering Electronics and Computer Engineering)
Time: 3 hours Max. Marks: 70
Note: 1. Question Paper consists of two parts (Part-A and Part-B)
2. Answering the question in Part-A is compulsory
3. Answer any THREE Questions from Part-B
*****

PART –A
1 a) Define flag register. [3M]
b) What is meant by end of program? [3M]
c) Difference between static and dynamic RAM. [4M]
d) State the function of bit scan instructions. [4M]
e) Define single chip microcomputer. [4M]
f) What is ARM? [4M]
PART -B
2 a) Draw the block diagram of 8086 and explain BIU and EU [8M]
b) Explain various instruction formats with examples? [8M]

3 a) Develop an assembly language program to find the sum of numbers from 1 to 100. [8M]
b) List out assembler directives of 8086 and explain them briefly? [8M]

4 a) Explain different control word formats of 8255 PPI? [8M]

b) Describe the operation of a parallel comparator A/D converter. [8M]

5 a) List out the salient features of 80386DX? [8M]

b) Write short notes on register organisation of 80386? [8M]

6 a) Write an 8051 program to receive a serial byte through RxD. [8M]

b) Describe the serial port operation in 8051 microcontroller? [8M]

7 Discuss the interrupt structure in PIC microcontrollers. List the various sources in [16M]
PIC 16C71. Write an initialization program to enable all of the interrupts in 16C74.

*****

||''|'''|''|''|'''||

www.android.universityupdates.in | www.universityupdates.in | www.ios.universityupdates.in

www.android.previousquestionpapers.com | www.previousquestionpapers.com | www.ios.previousquestionpapers.com

Code No: RT32041 R13 SET - 2

III B. Tech II Semester Regular/Supplementary Examinations, April - 2018

MICRO PROCESSORS AND MICRO CONTROLLERS
(Common to Electronics and Communication Engineering, Electronics and Instrumentation
Engineering Electronics and Computer Engineering)
Time: 3 hours Max. Marks: 70
Note: 1. Question Paper consists of two parts (Part-A and Part-B)
2. Answering the question in Part-A is compulsory
3. Answer any THREE Questions from Part-B
*****

PART –A
1 a) Define carry flag in flag register [3M]
b) What is mean by End of procedure? [4M]
c) Write any three applications of DAC? [4M]
d) State the function of Bit test instructions? [4M]
e) Define accumulator? [3M]
f) Draw a simple PIC reset circuit? [4M]
PART -B
2 a) Describe the memory segmentation and instruction queue? [8M]
b) Give the difference between minimum mode and maximum mode of operation [8M]
in 8086 microprocessor?

3 a) Give the difference between maskable and non-maskable interrupts? [8M]

b) Write an ALP in 8086 to exchange a block of N bytes of data between source [8M]
and destination?

4 a) With a neat diagram explain the architecture of 8255? [8M]

b) Explain the need of DMA data transfer? [8M]

5 a) With a neat sketch explain protected mode addressing without paging unit? [8M]
b) Explain how paging mechanism provides an effective technique to manage the [8M]
physical memory for multitasking systems?
6 a) Explain various modes of operation of timer /counters in 8051? [8M]
b) State the advantages of microcontrollers and explain them? [8M]

7 What do you mean by the prescaling of PIC timers? What is the advantage of [16M]
doing so? Is it possible to apply the prescaling to watchdog timer? If so justify.

*****

||''|'''|''|''|'''||

www.android.universityupdates.in | www.universityupdates.in | www.ios.universityupdates.in

www.android.previousquestionpapers.com | www.previousquestionpapers.com | www.ios.previousquestionpapers.com

Code No: RT32041 R13 SET - 3

III B. Tech II Semester Regular/Supplementary Examinations, April - 2018

MICRO PROCESSORS AND MICRO CONTROLLERS
(Common to Electronics and Communication Engineering, Electronics and Instrumentation
Engineering Electronics and Computer Engineering)
Time: 3 hours Max. Marks: 70
Note: 1. Question Paper consists of two parts (Part-A and Part-B)
2. Answering the question in Part-A is compulsory
3. Answer any THREE Questions from Part-B
*****

PART –A
1 a) Define overflow flag [3M]
b) What is mean by End of segment [4M]
c) Write any three salient features of ADC 7109? [4M]
d) State the function of Shift double instructions [4M]
e) Define stack pointer [3M]
f) Write the significance of program counter latch [4M]
PART -B
2 a) Briefly explain register organization in 8086 microprocessor [8M]
b) Draw and explain 8086 timing diagram during write operation [8M]

3 a) Explain the stack structure of 8086 in detail with a sketch [8M]

b) Discuss about various interrupts in 8086 [8M]

4 a) Draw the interfacing diagram of an ADC to 8086 [8M]

b) Explain the following data transfers (i) Programmed I/O (ii) Interrupted I/O. [8M]

5 a) Describe the addressing modes to facilitate efficient execution of higher level [8M]
programs
b) Write short notes on memory addressing in real mode [8M]

6 With a neat sketch explain the architecture of 8051 [16M]

7 What are various addressing modes in PIC microcontrollers? What is the role [16M]
of INDF in indirect addressing mode

*****

||''|'''|''|''|'''||

www.android.universityupdates.in | www.universityupdates.in | www.ios.universityupdates.in

www.android.previousquestionpapers.com | www.previousquestionpapers.com | www.ios.previousquestionpapers.com

Code No: RT32041 R13 SET - 4

III B. Tech II Semester Regular/Supplementary Examinations, April - 2018

MICRO PROCESSORS AND MICRO CONTROLLERS
(Common to Electronics and Communication Engineering, Electronics and Instrumentation
Engineering Electronics and Computer Engineering)
Time: 3 hours Max. Marks: 70
Note: 1. Question Paper consists of two parts (Part-A and Part-B)
2. Answering the question in Part-A is compulsory
3. Answer any THREE Questions from Part-B
*****

PART –A
1 a) Define HALT? [3M]
b) What do you mean by PUBLIC? [3M]
c) Write any three salient features of mode 2 of 8255? [4M]
d) State the function of set byte instruction? [4M]
e) Define SFR Register bank? [4M]
f) Draw the status register of 16CXX. [4M]
PART -B
2 a) With examples explain different addressing modes supported by 8086 [8M]
b) With a neat diagram explain a typical maximum mode operation of 8086 [8M]
system

3 a) Explain while loop and repeat-until structures with an example [8M]

b) What is macro? Give the difference between a macro and a subroutine [8M]

4 Draw the internal architecture of USART 8251 and explain its different status [16M]
and modes and control formats neatly.

5 a) Explain the types of registers available in 80386 and explain them briefly [8M]
b) List out the data types supported by 80386 [8M]

6 a) Explain the internal and external interrupts in 8051 [8M]

b) Discuss about the priority of the interrupts in 8051. And state for which [8M]
interrupt highest priority is given?

7 a) With a neat sketch explain ARM architecture [8M]

b) Briefly explain timers in PIC 16C61/71. [8M]

*****

||''|'''|''|''|'''||

www.android.universityupdates.in | www.universityupdates.in | www.ios.universityupdates.in