Scribd
Upload
87 views

SB10150CT: Schottky Barrier Rectifier

This document provides specifications for a Schottky barrier rectifier with part number SB10150CT. Key details include: - It has a maximum voltage rating of 150V and current rating of 10A. - The rectifier uses a TO-220AB package and is rated for high temperature soldering up to 250C. - Electrical characteristics include a maximum forward voltage of 0.88V at 5A and maximum reverse current of 50uA at 25C junction temperature. - Thermal resistance from junction to case is listed as 2.4C/W. The operating junction temperature range is -65C to +175C.

Uploaded by

Emmanuel Zambrano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
87 views

SB10150CT: Schottky Barrier Rectifier

This document provides specifications for a Schottky barrier rectifier with part number SB10150CT. Key details include: - It has a maximum voltage rating of 150V and current rating of 10A. - The rectifier uses a TO-220AB package and is rated for high temperature soldering up to 250C. - Electrical characteristics include a maximum forward voltage of 0.88V at 5A and maximum reverse current of 50uA at 25C junction temperature. - Thermal resistance from junction to case is listed as 2.4C/W. The operating junction temperature range is -65C to +175C.

Uploaded by

Emmanuel Zambrano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SB10150CT

SCHOTTKY BARRIER
RECTIFIER
VOLTAGE: 150V CURRENT: 10.0A

FEATURE TO-220AB
High current capability, Low forward voltage drop
Low power loss, high efficiency
High surge capability
High temperature soldering guaranteed
250°C /10sec/0.375" lead length at 5 lbs tension

MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: Common Cathode
Mounting position: any

Dimensions in inches and (millimeters)

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS


(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated)

SYMBOL SB10150CT units

Maximum Recurrent Peak Reverse Voltage Vrrm 150 V

Maximum RMS Voltage Vrms 105 V

Maximum DC blocking Voltage Vdc 150 V

Maximum Average Forward Rectified Current If(av) 10 A


Peak Forward Surge Current 8.3ms single Ifsm 160 A
half sine-wave superimposed on rated load per leg
Maximum Forward Voltage per leg and 25°C Vf 0.88 V
at 5A
Maximum Reverse Current per leg Tj =25°C 50 μA
Ir
at working peak reverse voltage Tj =110°C 1.0 mA

Typical Thermal Resistance per leg (Note 1) Rθ(jc) 2.4 °C/W

Operating Junction and Tj


-65 to +175 °C
Storage Temperature Ramge Tstg
Note:
1.Thermal Resistance from Junction to Case

Rev.A1 www.gulfsemi.com
RATINGS AND CHARACTERISTIC CURVES SB10150CT

Rev.A1 www.gulfsemi.com

You might also like