SCHEME and SYLLABUS

(Choice Based Credit Scheme)

for

BACHLOR OF TECHNOLOGY PROGRAMME

in

MECHANICAL ENGINEERING
(w.e.f. session 2017-2018)

DEPARTMENT OF MECHANICAL ENGINEERING

YMCA UNIVERSITY OF SCIENCE AND TECHNOLOGY

FARIDABAD
 VISION
YMCA University of Science and Technology aspires to be a nationally and
internationally acclaimed leader in technical and higher education in all spheres
which transforms the life of students through integration of teaching, research
and character building.

MISSION

 To contribute to the development of science and technology by synthesizing

teaching, research and creative activities.
 To provide an enviable research environment and state-of-the-art technological
exposure to its scholars.
 To develop human potential to its fullest extent and make them emerge as
world class leaders in their professions and enthuse them towards their social
responsibilities.
 Department of Mechanical Engineering

VISION
To be a centre of excellence by producing high caliber, competent and self-
reliant mechanical engineers, who possess scientific temperament and would
engage in activities relevant to industries with ethical values and flair to
research.

MISSION

 To provide efficient engineers for global requirements by imparting

quality education.
 To explore, create and develop innovations in various aspects of
engineering through industries and institutions.
 To emphasize on practical skills and socially relevant technology.
 ABOUT THE PROGRAM

YMCA University of Science & Technology, Faridabad established in 2009, formerly

known as YMCA Institute of Engineering, Faridabad, was established in year 1969 as a
Joint Venture of Govt. of Haryana and National Council of YMCA of India with active
assistance from overseas agencies of West Germany to produce highly practical oriented
personnel in specialized fields of engineering to meet specific technical manpower
requirements of industries. Mechanical Engineering Department was started in 1969 and has
been conducting B.Tech Course in Mechanical Engineering of 4-Years duration since 1997.
Students are admitted through centralized counseling nominated by state government in 1st
Year and 2nd year through lateral entry entrance test. The total intake for the B.Tech
programme is 120 and 24 through LEET in second year. Besides under graduate degree
courses, it is also running M.Tech Mechanical Engineering Course (with specialization in
Manufacturing Technology and Automation) and Ph.D. All courses are duly approved by
AICTE/ UGC. The Mechanical Engineering Department has been well known for its track
record of employment of the pass out students since its inception.

The Department has four storey building with 08 class rooms, 14

laboratory, three workshops, twelve offices, Seminar Hall and Conference Hall. It has
established Centre of Excellence with Danfoss Industries (P) Ltd in the area of ‘Climate and
Energy’ and one with Daikin in the field of ‘Refrigeration and Air Conditioning’. It has
excellent faculty with 10 Professors, 03 Associate Professors and 16 Assistant Professors.
The various syllabi of UG/PG courses in Mechanical Engineering Department, has been
prepared with active participation from Industry. The Department is organizing number of
expert lectures from industry experts for students in every semester. Seven month training is
mandatory for every B.Tech student. Emphasis has been given on project work and
workshop for skill enhancement of students. Choice based credit system allows students to
study the subjects of his/her choice from a number of elective courses /audit courses.
 PROGRAM EDUCATIONAL OBJECTIVES (PEOs)

PEO-1:
To train students with practical skills and experimental practices related to core and applied
areas of mechanical engineering to expand their knowledge horizon beyond books..

PEO-2:
To enable students to design, develop and maintain mechanical equipments which are useful
for the society.

PEO-3:
To improve team building, team working and leadership skills of the students with high
regard for ethical values and social responsibilities.

PEO- 4:
To enable students to communicate effectively and demonstrate the knowledge of project
management and independent research.
 PROGRAMME OUTCOMES (POs)

Engineering Graduates will be able to:

1) Engineering Knowledge: Apply knowledge of mathematics, science, engineering

fundamentals, and mechanical engineering to the solution of engineering problems.

2) Problem Analysis: Identify, formulate, review literature and analyze mechanical

engineering problems to design, conduct experiments, analyze data and interpret data.

3) Design /Development of Solutions: Design solution for mechanical engineering

problems and design system component of processes that meet the desired needs with
appropriate consideration for the public health and safety, and the cultural, societal and
the environmental considerations.

4) Conduct Investigations of Complex Problems: Use research based knowledge and

research methods including design of experiments, analysis and interpretation of data,
and synthesis of the information to provide valid conclusions in mechanical engineering.

5) Modern Tool Usage: Create, select, and apply appropriate techniques, resources, and
modern engineering and IT tools including prediction and modeling to mechanical
engineering activities with an understanding of the limitations.

6) The Engineer and Society: Apply reasoning informed by the contextual knowledge to
assess societal, health, safety, legal and cultural issues and the consequent responsibilities
relevant to mechanical engineering practice.

7) Environment and Sustainability: Understand the impact of the mechanical

engineering solutions in societal and environmental contexts, and demonstrate the
knowledge and need for sustainable development.

8) Ethics: Apply ethical principles and commit to professional ethics and responsibilities
and norms of the mechanical engineering practice.

9) Individual and Team Work: Function affectively as an individual, and as a member

or leader in diverse teams, and in multidisciplinary settings in mechanical engineering.

10) Communication: Communicate effectively on complex engineering activities with

the engineering committee and with society at large, such as, being able to comprehend
and write affective reports and design documentation, make effective presentations in
mechanical engineering.

11) Project Management and Finance: Demonstrate knowledge & understanding of the
mechanical engineering principles and management principles and apply these to one’s
own work, as a member and leader in a team, to manage projects and in multidisciplinary
environments in mechanical engineering.
 12) Life - Long Learning: Recognize the need for, and the preparation and ability to
engage in independent research and lifelong learning in the broadest contest of
technological changes in mechanical engineering.

PROGRAM SPECIFIC OUTCOMES (PSOs):

1) To apply practical skills, knowledge of engineering fundamentals and mechanical

engineering, to industries and institutions.

2) To explore, create and develop innovations in various aspects of engineering. The

student will be ready to take-up career or to pursue higher studies with high regard to
ethical values and social responsibilities.
 YMCA UNIVERSITY OF SCIENCE AND TECHNOLOGY, FARIDABAD
SYNOPSIS OF
SCHEME OF STUDIES & EXAMINATIONS
4 YEARS BACHELOR of TECHNOLOGY PROGRAMME IN
MECHANICAL ENGINEERING
SEMESTER I – VIII
(w.e.f. Session 2017-18)

B. TECH SCHEME CREDITS CALCULATIONS

Contact
S.No. Category of Courses Hours Credits

1. Programme Core Courses (PCC) 96 83

2. Ability Enhancement Compulsory Courses (AECC) 10 8

3. Skill Enhancement Courses (SEC) 50 35

4. Discipline Specific Elective Courses (DSE) 15 15

5. General elective Courses (GEC) 9 9

6. Basic Science Courses (BSC) 28 25

7. Basic Engineering Courses (BEC) 22 17

8. Mandatory Audit Courses (MAC) 4 0

9. Massive Open Online Courses (MOOCS) 0 4

Total 234 196

Note: 1. MOOCS course will be opted by students any time during from III to VI semester
of their B. Tech programme.
SEMESTER WISE SUMMARY OF THE PROGRAMME

S.No. Semester No. of Contact Hours Marks Credits

1. I 32 850 26
2. II 35 900 26
3. III 37 900 28
4. IV 37 900 28
5. V 30 800 25
6. VI 33 900 26
7. VII One Semester 500 10
8. VIII 30 700 23
Total 234 6450 192
Total with 6550 196
MOOCS

Note: Four credits for the MOOCS course are to be earned in any semester from III to VI.
PROGRAMME CORE COURSES (PCC)
No. of Contact No. of
S.No. Code Name of the Course Semester
Hours Credits
1. ME-201C Mechanics of Solids 3 3 III
2. ME-203C Fluid Mechanics 4 4 III
3. ME-205C Engineering Mechanics 4 4 III
4. ME-207C Thermodynamics 4 4 III
5. ME-209C Manufacturing Processes 3 3 III
6. ME-251C Mechanics of Solids Lab 2 1 III
7. ME-253C Fluid Mechanics Lab 2 1 III
Machine Drawing using
8. ME-255C 4 2 III
AutoCAD
9. ME-202C Kinematics of Machines 3 3 IV
Material Science and
10. ME-204C 4 4 IV
Engineering
11. ME-206C Internal Combustion Engines 4 4 IV
12. ME-208C Fluid Machines 3 3 IV
Manufacturing Technology and
13. ME-210C 3 3 IV
Metrology
14. ME-212C Advanced Strength of Materials 4 4 IV
15. ME-252C Kinematics of Machines Lab 2 1 IV
Material Science and
16. ME-254C 2 1 IV
Engineering Lab
Internal Combustion Engines
17. ME-256C 2 1 IV
Lab
18. ME-258C Fluid Machines Lab 2 1 IV
19. ME-301C Dynamics of Machines 4 4 V
Refrigeration and Air-
20. ME-303C 4 4 V
Conditioning
21. ME-305C Industrial Engineering 3 3 V
22. ME-307C Machine Design -1 3 3 V
23. ME-351C Dynamics of Machines Lab 2 1 V
Refrigeration and Air-
24. ME-353C 2 1 V
Conditioning Lab
25. ME-302C Heat and Mass Transfer 4 4 VI
26. ME-304C Computer Aided Design 3 3 VI
27. ME-306C CAM and Automation 3 3 VI
28. ME-308C Machine Design – II 3 3 VI
29. ME-352C Heat and Mass Transfer Lab 2 1 VI
30. ME-354C Computer Aided Design Lab 2 1 VI
31. ME-356C CAM and Automation Lab 2 1 VI
32. ME-402C Operations Research 4 4 VIII
Total 96 83
ABILITY ENHANCEMENT COMPULSARY COURSES (AECC)

S.No. Code Name of Course No. of Credits Semester

Contact
Hours

1. HAS-107C Environmental Science 3 3 I

2. HAS-109C Essentials of 3 3 II
Communications

3. HAS-159C Language Lab 2 1 II

4. ME-358C Presentation Skill 2 1 VI

Development

Total 10 8

SKILL ENHANCEMENT COURSES (SEC)

S.No. Code Name of Course No. of Contact Credits Semester

Hours

1. WS-161C Workshop I 6 3 I

2. WS-162C Workshop II 6 3 II

3. WS-261C Workshop III 6 3 III

4. WS-262C Workshop IV 6 3 IV

5. WS-361C Workshop V 6 3 V

6. WS-362C Workshop VI 6 3 VI

7. ME-401C Industrial Training One semester 10 VII

8. WS-462C Workshop VII 6 3 VIII

9. ME-452C Project 8 4 VIII

Total 50 35
DISCIPLINE SPECIFIC ELECTIVE (DSE)

S.No. Name of Course No. of Contact No. of Credits Semester

Hours

1. Discipline Specific Elective I 3 3 V

2. Discipline Specific Elective II 3 3 VI

3. Discipline Specific Elective III 3 3 VI

4. Discipline Specific Elective IV 3 3 VIII

5. Discipline Specific Elective V 3 3 VIII

Total 15 15

GENERAL ELECTIVE COURSE (GEC)

S.No. Name of Course No. of Contact No. of Credits Semester

Hours

1. General Elective Course I 3 3 V

2. General Elective Course II 3 3 VI

3. General Elective Course III 3 3 VIII

TOTAL 9 9
BASIC SCIENCE COURSES (BSC)

S.No. Code Name of Course No. of No. of Semester

Contact Credits
Hours

1. HAS-101C Physics-I 4 4 I
2. HAS-103C Mathematics-I 4 4 I
3. HAS-105C Chemistry 3 3 I
4. HAS-151C Physics Lab-I 2 1 I
5. HAS-155C Chemistry Lab 2 1 I
6. HAS-102C Physics-II 4 4 II
7. HAS-104C Mathematics-II 4 4 II
8. HAS-152C Physics Lab-II 2 1 II
9. ME-211C Numerical Methods 3 3 III
Total 28 25

BASIC ENGINEERING COURSES (BEC)

S.No. Name of Course No. of No. of Semester

Code Contact Credits
Hours

1. EC-101C Elements of Electronics 3 3 I

Engineering
2. ME-101C Basics of Mechanical Engineering 3 3 I
3. ME-151C Basics of Mechanical Engineering 2 1 I
Lab
4. EE-101C Basic Electrical Engineering 3 3 II
5. CE-101C Fundamentals of Computers & 3 3 II
Programming with C
6. EE-151C Basic Electrical Engineering Lab 2 1 II
7. CE-151C Fundamentals of Computers & 2 1 II
Programming with C Lab
8. ME-152C Engineering Drawing 4 2 II
Total 22 17
DISCIPLINE SPECIFIC ELECTIVE COURSE-I (DSE-I) (Semester-V)

S.No. Code Name of Course Contact Credits

Hours
1 ME-309C Principles of Management 3 3

2. ME-311C New Venture Creation 3 3

3. ME-313C Welding Technology 3 3

4. ME-315C Aircraft Engine Operation and Maintenance 3 3

5. ME-317C Metallurgy 3 3

Note: Students will have to select any one out of the list.

DISCIPLINE SPECIFIC ELECTIVE COURSE-II (DSE-II) (Semester-VI)

S.No. Code Name of Course Contact Credits

Hours
1. ME-310C Industrial Management 3 3

2. ME-312C Applied Thermodynamics 3 3

3. ME-314C Tool Design 3 3
4. ME-316C Automobile Engineering 3 3
5. ME-318C Design of Thermal Systems 3 3

Note: Students will have to select any one out of the list.
DISCIPLINE SPECIFIC ELECTIVE COURSE-III (DSE-III) (Semester- VIII)

S.No. Code Name of Course Contact Credits

Hours
1. ME-404C Mechatronics 3 3

2. ME-406C Production Planning and Control 3 3

3. ME-408C Industrial Controls 3 3
4. ME-410C Machine Tool Technology 3 3
5. ME-412C Estimation and Design of RAC Plants 3 3

Note: Students will have to select any one out of the list.

DISCIPLINE SPECIFIC ELECTIVE COURSE-IV (DSE-IV) (Semester- VIII)

S.No. Code Name of Course Contact Credits

Hours
1. ME-414C Flexible Manufacturing System 3 3

2. ME-416C Project Management 3 3

3. ME-418C Tribology 3 3
4. ME-420C Air Conditioning Equipments 3 3
5. ME-422C Non Conventional Energy Resource 3 3
Utilization

Note: Students will have to select any one out of the list.
DISCIPLINE SPECIFIC ELECTIVE COURSE-V (DSE-V) (Semester-VIII)

S.No. Code Name of Course Contact Credits

Hours
1. ME-424C Micro and Nano Manufacturing 3 3

2. ME-426C Quality Management 3 3

3. ME-428C Design and Optimisation 3 3
4. ME-430C Power Plant Engineering 3 3
5. ME-432C Advanced Manufacturing 3 3
Processes

GENERAL ELECTIVE COURSES- I, II and III (Semester- V, VI and VIII

respectively)

Students have to select three different General Elective Courses-I, II &III from the given
list:

Courses offered by Computer Engineering Department

S.No. Code Name of Course No. of Contact

Hours Credits

1. GC-101C Intelligent Systems 3 3

2. GC-102C Cyber laws and Security 3 3

3. GC-103C Soft Computing 3 3

GC-104C Web Technology and Information

4. 3 3
Retrieval
5. GC-105C Intellectual Property and Rights 3 3

Courses offered by Electrical Engineering Department

S.No. Code Name of Course No. of Contact Credits

Hours

1. GL-201C Installation Testing & Maintenance 3 3

of Electrical Equipments
2. GL-202C Utilization of Electrical Power & 3 3
Traction
Courses offered by Electronics Engineering Department

S.No. Code Name of Course No. of Contact

Hours Credits

1. GE-401C 3 3
Microprocessor and Interfacing
2. GE-402C 3 3
Digital Signal Processing
3. GE-403C 3 3
Instrumentation and Control
4. GE-404C 3 3
Data Communication and Networking

Courses offered by HAS Department

S.No. Code Name of Course No. of Contact Hours Credits

1. GA-501C 3 3
Soft Skills for Engineers
2. GA-502C 3 3
Maths –III

Courses offered by MBA Department

Code No. of
S.No. Name of Course Contact Credits
Hours

1. GB-601C 3 3
Human Resource Management
2. GB-602C 3 3
Financial Management
3. GB-603B 3 3
Marketing Management
4. GB-604B 3 3
Entrepreneur Development
5. GB-605B Principles of Management and 3 3
Economics
MANDARORY AUDIT COURSES (Semester- III and IV respectively)

No. of
S.No. Name of Course Contact Credits
Code Hours

1. AC-101C 2 0
German- I
2. AC-102C German –II 2 0
(With German – I as prerequisite)
3. AC-103C 2 0
French – I
4. AC-104C French –II 2 0
(With French – I as prerequisite)
5. AC-105C 2 0
Sanskrit – I
6. AC-106C Sanskrit – II 2 0
(With Sanskrit– I as prerequisite)
7. AC-107C 2 0
Personality Development
8. AC-108C 2 0
Interview and Group Discussion Skills
9. AC-109C 2 0
Yoga and Meditation
10. AC-110C 2 0
Art of Living/ Living Skills
11. AC-111C Contribution of NSS towards Nation/Role 2 0
of NSS
12. AC-112C 2 0
Physical Education

Note: Students will have to select any two out of the list.

GRADING SCHEME

Marks % Grade Grade points Category

90-100 O 10 Outstanding
80<marks<90 A+ 9 Excellent
70<marks< 80 A 8 Very good
60<marks< 70 B+ 7 Good
50<marks< 60 B 6 Above average
45<marks< 50 C 5 Average
40<marks< 45 P 4 Pass
<40 F 0 Fail
Ab 0 Absent

Percentage calculation= CGPA * 9.5

MINIMUM CREDITS TO BE EARNED FOR DIFFERENT COURSE FOR
QUALIFYING FOR THE B.TECH IN MECHANICAL ENGINEERING

S.N. Category of Courses Abbreviat Credits Offered Minimum

ion Credits to be
Earned
1. Programme Core Course PCC ( ≥ 80) 83 83
2. Ability Enhancement AECC ( ≥ 06) 08 08
Compulsory Course
3. Skill Enhancement Course SEC ( ≥ 32) 35 35
4. Discipline Specific DSE ( ≥ 15) 15 12
Electives
5. General Elective Course GEC ( ≥ 06) 09 06
6. Basic Science Course BSC ( ≥ 20) 25 25
7. Basic Engineering Course BEC ( ≥ 15) 17 17
8. Mandatory Audit Course MAC 0 0 0
9. Massive Open Online MOOCS 4 4 4
Courses
TOTAL ≥178 196 190
 YMCA UNIVERSITY OF SCIENCE AND TECHNOLOGY, FARIDABAD
SCHEME OF STUDIES & EXAMINATIONS
B.TECH 1st YEAR (SEMESTER -I) CE/ IT/ MECH ENGINEERING (2017-2018)

Marks Course
Teaching Marks for End
Course Total
Course Title for Term Examination Credits Type
Schedule
No. Marks
Sessionals
L P TOTAL Theory Practical
HAS-101C Physics-I 4 - 4 25 75 - 100 4 BSC

HAS-103C Mathematics-I 4 - 4 25 75 - 100 4 BSC

HAS-105C Chemistry 3 - 3 25 75 - 100 3 BSC

HAS-107C Environmental 3 - 3 25 75 - 100 3 AECC

Science
Elements of BEC
EC-101C Studies 3 - 3 25 75 - 100 3
Electronics Engg.

Basics of BEC
ME-101C Engineering 3 - 25 75 - 100 3
Mechanical Engg. 3
HAS-151C Physics Lab-I - 2 2 15 - 35 50 1 BSC
Engineering
HAS-155C Chemistry Lab - 2 2 15 - 35 50 1 BSC
Basics of BEC
ME-151C Mechanical - 2 2 15 - 35 50 1

Engineering Lab

WS-161C Workshop-I - 6 6 30 - 70 100 3 SEC

Total 20 12 32 225 450 175 850 26

Note: Exams duration will be as under

(a) Theory exams will be of 03 hours duration.
(b) Practical exams will be of 02 hours duration
(c) Workshop exam will be of 03 hours duration
 YMCA UNIVERSITY OF SCIENCE AND TECHNOLOGY, FARIDABAD
SCHEME OF STUDIES & EXAMINATIONS
B.TECH 1st YEAR (SEMESTER -II) CE/ IT/ MECH ENGINEERING (2017-2018)

Teaching Marks
Course Marks for End Total Course
Course Title Term Examination Credits Type
Schedule for
No. Marks

L P Total Sessionals Theory Practical

HAS-102C Physics-II 4 - 4 25 75 - 100 4 BSC

HAS-104C Mathematics-II 4 - 4 25 75 - 100 4 BSC

HAS-109C Interactive English 3 - 3 25 75 - 100 3 AECC

EE-101C Basic Electrical 3 - 3 25 75 - 100 3 BEC

Engineering

Fundamentals of
CE-101C Computer & 3 - 3 25 75 - 100 3 BEC
Programming with C

HAS-152C Physics Lab-II - 2 2 15 - 35 50 1 BSC

Fundamentals of
CE-151C Computer & - 2 2 15 - 35 50 1 BEC
Programming with C
Lab
EE-151C Electrical Technology - 2 2 15 - 35 50 1 BEC
Lab
HAS-159C Language lab - 2 2 15 - 35 50 1 AECC

ME-152C Engineering Drawing - 4 4 30 - 70 100 2 BEC

WS-162C Workshop- II - 6 6 30 - 70 100 3 SEC

Total 17 18 35 245 375 280 900 26

Note: Exams duration will be as under

(a) Theory exams will be of 03 hours duration.
(b) Practical exams will be of 02 hours duration
(c) Workshop exam will be of 03 hours duration
 YMCA UNIVERSITY OF SCIENCE AND TECHNOLOGY, FARIDABAD
SCHEME OF STUDIES & EXAMINATIONS
nd
B.TECH 2 YEAR (SEMESTER – III) MECHANICAL ENGINEERING (2017-18)

Teaching Marks
Course Marks for End Total Course
Course Title Schedule for Term Examination Credits Type
No. Marks

L T P Total Sessionals Theory Practical

ME-201C Mechanics of Solids 3 - - 3 25 75 - 100 3 PCC

ME-203C Fluid Mechanics 3 1 - 4 25 75 - 100 4 PCC

ME-205C Engineering 3 1 - 4 25 75 - 100 4 PCC

Mechanics
ME-207C Thermodynamics 3 1 - 4 25 75 - 100 4 PCC

ME-209C Manufacturing 3 - - 3 25 75 - 100 3 PCC

Processes
ME-211C Numerical Methods 3 - - 3 25 75 - 100 3 BSC

ME-251C Mechanics of Solids - - 2 2 15 - 35 50 1 PCC

Lab
ME-253C Fluid Mechanics Lab - - 2 2 15 - 35 50 1 PCC

ME-255C Machine Drawing - - 4 4 30 - 70 100 2 PCC

using AutoCAD
Mandatory Audit 2 - - 2 - - - - - MAC
Course –I
WS-261C Workshop- III - - 6 6 30 - 70 100 3 SEC

Total 20 3 14 37 240 450 210 900 28

Note: Exams Duration will be as under

(a) Theory exams will be of 03 hours duration.
(b) Practical exams will be of 02 hours duration
(c) Workshop exam will be of 03 hours duration
 YMCA UNIVERSITY OF SCIENCE AND TECHNOLOGY, FARIDABAD
SCHEME OF STUDIES & EXAMINATIONS
B.TECH 2nd YEAR (SEMESTER – IV) MECHANICAL ENGINEERING (2017-18)

Teaching Marks
Course Marks for End Total Course
Course Title Term Examination Credits Type
Schedule for
No. Marks

L T P Total Sessionals Theory Practical

ME-202C Kinematics of 3 - - 3 25 75 - 100 3 PCC
Machines
ME-204C Material Science and 4 - - 4 25 75 - 100 4 PCC
Engineering
ME-206C IC Engines 3 1 - 4 25 75 100 4 PCC

ME-208C Fluid Machines 3 - - 3 25 75 - 100 3 PCC

Manufacturing -
ME-210C 3 - 3 25 75 - 100 3 PCC
Technology and
Metrology

Advanced Strength of
ME-212C 3 1 - 4 25 75 - 100 4 PCC
Materials

ME-252C Kinematics of - - 2 2 15 - 35 50 1 PCC

Machines Lab
ME-254C Material Science and - - 2 2 15 - 35 50 1 PCC
Engineering Lab
-
ME-256C IC Engines Lab - 2 2 15 - 35 50 1 PCC

ME-258C Fluid Machines Lab - - 2 2 15 - 35 50 1 PCC

Mandatory Audit 2 - - 2 - - - - - MAC

Course –II
WS-262C Workshop- IV - - 6 6 30 - 70 100 3 SEC

Total 21 2 14 37 240 450 210 900 28

Note: Exams Duration will be as under

(a) Theory exams will be of 03 hours duration.
(b) Practical exams will be of 02 hours duration
(c) Workshop exam will be of 03 hours duration
 YMCA UNIVERSITY OF SCIENCE AND TECHNOLOGY, FARIDABAD
SCHEME OF STUDIES & EXAMINATIONS
B.TECH 3rd YEAR (SEMESTER – V) MECHANICAL ENGINEERING (2017-18)

Teaching Marks
Course Marks for End Total Course
Course Title Schedule for Term Examination Credits Type
No. Marks

L T P Total Sessionals Theory Practical

ME-301C Dynamics of 3 1 - 4 25 75 - 100 4 PCC
Machines
ME-303C Refrigeration and 3 1 - 4 25 75 - 100 4 PCC
Air Conditioning
Industrial -
ME-305C Engineering 3 - 3 25 75 - 100 3 PCC

ME-307C Machine Design – I 3 - - 3 25 75 - 100 3 PCC

Discipline Specific 3 - - 3 25 75 - 100 3 DSE

Elective Course-I
General Elective -
Course- I 3 - 3 25 75 - 100 3 GEC

ME-351C Dynamics of - - 2 2 15 - 35 50 1 PCC

Machines Lab
Refrigeration and -
ME-353C - 2 2 15 - 35 50 1 PCC
Air Conditioning
Lab
WS-361C Workshop-V - - 6 6 30 - 70 100 3 SEC

Total 18 2 10 30 210 450 140 800 25

Note: Exams duration will be as under

(a) Theory exams will be of 03 hours duration.
(b) Practical exams will be of 02 hours duration
(c) Workshop exam will be of 03 hours duration
 YMCA UNIVERSITY OF SCIENCE AND TECHNOLOGY, FARIDABAD
SCHEME OF STUDIES & EXAMINATIONS
B.TECH 3rd YEAR (SEMESTER – VI) MECHANICAL ENGINEERING (2017-18)

Teaching Marks
Course Marks for End Total Course
Course Title Term Examination Credits Type
Schedule for
No. Marks

L T P Total Sessionals Theory Practical

ME-302C Heat and Mass 3 1 - 4 25 75 - 100 4 PCC
Transfer
ME-304C Computer Aided 3 - - 3 25 75 - 100 3 PCC
Design
ME-306C CAM and 3 - - 3 25 75 - 100 3 PCC
Automation
ME-308C Machine Design –II 3 - - 3 25 75 - 100 3 PCC

Discipline Specific 3 - - 3 25 75 - 100 3 DSE

Elective Course-II
General Elective -
Course- II 3 - 3 25 75 - 100 3 GEC

Heat and Mass -

ME-352C - 2 2 15 - 35 50 1 PCC
Transfer Lab

Computer Aided -
ME-354C - 2 2 15 - 35 50 1 PCC
Design Lab

ME-356C CAM and - - 2 2 15 - 35 50 1 PCC

Automation Lab
ME-358C Presentation Skill - - 2 2 50 - - 50 1 AECC
Development
WS-362C Workshop-VI - - 6 6 30 - 70 100 3 SEC
Total 18 1 14 33 275 450 175 900 26

Note: Exams Duration will be as under

(a) Theory exams will be of 03 hours duration.
(b) Practical exams will be of 02 hours duration
(c) Workshop exam will be of 03 hours duration
 YMCA UNIVERSITY OF SCIENCE AND TECHNOLOGY, FARIDABAD
SCHEME OF STUDIES & EXAMINATIONS
B.TECH 4th YEAR (SEMESTER – VII) MECHANICAL ENGINEERING (2017-18)

Credits: 10 (SEC)

S.No. Course Title Teaching Examination Schedule

No. Schedule (Marks)
Annual Continuous Total
Exam Assessment
st
1. ME-401C Industrial 6 Months(1 350 150 500
Training week of June to
1st week of
December)

Procedure for Annual Exam and Continuous Assessment of Industrial Training:

(A) Annual Exams Marks

1. Training Evaluation 100 Marks
2. Training Seminar 100 Marks
3. Training Viva 150 Marks

(B) Continuous Assessment Marks

1. Assessment by University Faculty 50 Marks
2. Assessment by Industrial Guide 50 Marks
3. Conduct Marks 50 Marks

Total: 500 Marks

 YMCA UNIVERSITY OF SCIENCE AND TECHNOLOGY, FARIDABAD
SCHEME OF STUDIES & EXAMINATIONS
B.TECH 4th YEAR (SEMESTER – VIII) MECHANICAL ENGINEERING (2017-18)

Teaching Marks
Course Marks for End Total Course
Course Title Term Examination Credits Type
Schedule for
No. Marks

L T P Total Sessionals Theory Practical

ME-402C Operations 3 1 - 4 25 75 - 100 4 PCC
Research
Discipline Specific -
Elective Course-III 3 - 3 25 75 - 100 3 DSE

Discipline Specific 3 - - 3 25 75 - 100 3 DSE

Elective Course-IV
Discipline Specific 3 - - 3 25 75 - 100 3 DSE
Elective Course-V
General Elective -
Course- III 3 - 3 25 75 - 100 3 GEC

ME-452C Project - - 8 8 30 - 70 100 4 SEC

WS-462C Workshop-VII - - 6 6 30 - 70 100 3 SEC

Total 15 1 14 30 185 375 140 700 23

Note: Exams Duration will be as under

(a) Theory exams will be of 03 hours duration.
(b) Practical exams will be of 02 hours duration
(c) Workshop exam will be of 03 hours duration
 HAS-101C PHYSICS I
B. Tech I Semester
No. of Credits: 4 Sessional: 25 Marks
L T P Total Theory : 75 Marks
4 0 0 4 Total : 100 Marks
Duration of Exam: 3 Hours

Pre –Requisite: None

Successive: Physics II, Engineering Mechanics, Material Science

Course Objectives:
The objective of the course is to make the students familiar with topics of general physical
optics like interference, diffraction, polarization, fiber optics, lasers. The second part of the
syllabus consists of theory of relativity, electrostatics and electrodynamics.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Understand the basics of interference and diffraction.
CO 2- Learning the phenomenon of polarization and have elementary knowledge of lasers
and fibre optics.
CO 3- Know the fundamentals of Electrostatics and Electrodynamics.
CO 4- Comprehend the basics of special theory of relativity.

Syllabus:

UNIT I Interference: Coherent sources, conditions for sustained interference, Analytical

treatment of interference, Division of Wave-Front - Fresnel’s Biprism, Division of
Amplitude- Interference by a plane parallel film, Wedge-shaped film, Newton’s
Rings, Michelson Interferometer, applications (Resolution of closely spaced
spectral lines, determination of wavelengths).
Diffraction: Difference between interference and diffraction Fraunhofer and
Fresnel diffraction. Fraunhofer diffraction through a single slit, Plane transmission
diffraction grating, absent spectra, dispersive power, resolving power and Rayleigh
criterion of resolution.

UNIT II Polarisation: Polarised and unpolarised light, Uniaxial crystals, optic axis, double
refraction, Nicol prism, quarter and half wave plates, Detection and Production of
different types of polarized light, Polarimetry; Optical and specific rotation,
Biquartz and Laurent’s half shade polarimeter.
 Laser and Fibre Optics: Spontaneous and Stimulated emission, Laser principle,
Einstein’s coefficients, characteristics of laser beam-concept of coherence, spatial
and temporal coherence, He-Ne and semiconductor lasers (simple ideas),
applications.
Propagation of light in optical fibres, numerical aperture, V-number, single and
multimode fibres, Elementary idea of attenuation and dispersion, applications.

UNIT III Electrostatics: Dielectric polarization, dielectric relaxation process, types of

polarization, relation between E,P and D, Gauss’s law in the presence of a
dielectric, Energy stored in a uniform electric field, dielectric losses and variation
with frequency.
Electrodynamics: Maxwell’s field equations –significance, differential and
integral form, Maxwell’s equations in different media- free space, dielectric and
conductor.

UNIT IV Special Theory of Relativity: Inertial and non-inertial frames, Galilean

transformations, Michelson’s Morley Experiment, Postulates of Special Theory of
Relativity, Lorentz transformations, Consequences of LT (length contraction and
time dilation), addition of velocities, variation of mass with velocity, mass energy
equivalence.

Text Books
1. Perspectives of Modern Physics - Arthur Beiser (TMH)
2. Optics – Ajoy Ghatak (TMH)
3. Modern Physics for Engineers – S.P. Taneja (R. Chand)
4. Engineering Physics – Satya Prakash (Pragati Prakashan)
5. Modern Engineering Physics – A.S.Vasudeva (S. Chand)
6. Engineering Physics (Vol-1)- S.L. Gupta (Dhanpat Rai)
Reference Books:
1. Fundamentals of Physics – Resnick & Halliday (Asian Book)
2. Introduction to Electrodynamics – D.J. Griffith (Prentice Hall)
 HAS-103C MATHEMATICS I
B. Tech I Semester
No. of Credits: 4 Sessional: 25 Marks
L T P Total Theory : 75 Marks
4 0 0 4 Total : 100 Marks
Duration of Exam: 3 Hours

Pre –Requisite: None

Successive: Mathematics II, Numerical Methods, Operations Research

Course Objectives:
To make students able to learn about matrices, rank, Eigen values and Eigen vectors and
about the quadratic form of the matrices, Taylor’s series, Macluarin’s series, Asymptotes,
Curvature, partial differentiation, Composite and Implicit functions, Maxima-Minima of
functions of two variables, Differentiation under the integral sign, Double Integral, Triple
Integral, Beta & Gamma functions, Scalar and Vector-point functions, gradient, divergence
and curl of a vector, Green’s theorem, Stoke’s theorem, Gauss-Divergence theorem and
their application.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Understanding matrices, rank, eigen values and eigen vectors and about the quadratic
form of the matrices.
CO 2- Learning about Taylor’s series, Macluarin’s series , Asymptotes, Curvature, Students
learn about partial differentiation, Composite and Implicit functions, Maxima-
Minima of functions of two variables, Differentiation under the integral sign.
CO 3- Explore Double integral, Triple integral, Beta & Gamma functions and their
applications.
CO 4- Acquire knowledge about scalar and vector point function, gradient, divergence and
curl ,Green’s ,Divergence and Stoke’s theorem and their applications.
Syllabus:
UNIT I Matrices and its Applications: Rank of Matrix, Normal form, Inverse using
Gauss-Jordon method, Consistency of linear system of equations using Rank
method, Linear and Orthogonal transformation, Linear-dependence and Linear-
Independence of Vectors, Eigen-Values and its properties, Eigen-Vectors, Cayley-
Hamilton theorem & its applications, Diagonalisation of Matrices, Similar
Matrices, Quadratic Forms.
UNIT II Applications of Derivatives: Taylor’s & Maclaurin’s Series for one variable,
Asymptotes, Curvature, Radius of Curvature for Cartesian, Parametric and Polar-
curves, Radius of curvature at the Origin (by using Newton’s method, by method
of Expansion), Center of curvature.
Partial Differentiation and its Applications: Functions of two or more
variables, Partial derivatives of Ist and higher order, Total differential and
differentiability, Euler’s theorem for Homogeneous functions, Derivatives of
Composite and Implicit functions, Jacobians, Taylor’s series for functions of two
variables, Maxima-Minima of functions of two variables, Lagrange’s Method of
undetermined multipliers, Differentiation under the integral sign (Leibnitz rule).

UNIT III Double and Triple Integrations: Double integral, Change of Order of
Integration, Double integral in Polar co-ordinates, Applications of double integral
to find (i) Area enclosed by plane curves (ii) Volume of solids of revolution,
Triple Integral, Change of variables, Volume of solids, Beta & Gamma functions
and relation between them.

UNIT IV Vector Calculus: Differentiation of vectors, Scalar and Vector-point functions,

Gradient of a scalar field and directional derivatives, Divergence and Curl of a
vector field and their physical interpretations, Integration of vectors, line integral,
Surface integral, Volume integral, Green’s theorem, Stoke’s theorem, Gauss-
Divergence theorem(without proof) with their simple applications.

Text Books/ Reference Books:

1. Advanced Engineering Mathematics, Erwin Kreyzig

2. B.S. Grewal, Higher Engg. Mathematics, Khanna Publications.
3. Reena Garg, R S Goel, Deepankar Sharma, Engg. Mathematics-I, Khanna
Publications.
4. Advanced Engineering Mathematics, Dr. Babu Ram, Pearsons publications.
5. Engineering Mathematics Seventh Edition by John Bird, Published by Newnes.
6. Advanced Engineering Mathematics, K.A. Stroud, Dexter Booth, Published by
Palgrave.
 HAS-105C CHEMISTRY
B. Tech I/II Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory : 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 Hours

Pre –Requisite: None

Successive: Material Science

Course Objectives:
To illustrate the basic understanding of Analytical chemistry and to improve the reasoning
ability of the student towards chemistry in everyday life, enhance the basic knowledge for the
theoretical aspect of engineering chemistry. To make students aware about the various
applications of chemical sciences in engineering.

Course Outcomes (COs): At the end of the program the students acquired knowledge about:

CO 1- Illustrate the basic parameters of water, different water softening processes and effect
of hard water in industries.
CO 2- Describe the basic properties and application of various polymers as an engineering
material.
CO 3- Demonstrate the mechanism, physical and chemical properties of lubricants and their
applications.
CO 4- Apply instrumental techniques of chemical analysis.

Syllabus:
UNIT I Polymers and Polymerization: Introduction & Classification of polymers. effect
of structure on properties of polymers, Bio degradable polymers, preparation,
properties and technical application of thermo–plastics ( PVC, PE, Teflon )&
thermosets ( PF,UF), elastomers (SBR,BUNA-N), Silicones, Introduction to
polymeric composites.
Phaserule: Terminology, Derivation of Gibb’s phase rule. One component system:
water system, two components systems: Simple eutectic system (Pb – Ag), system
with congruent melting point (Zn – Mg), Cooling curves.

UNIT II Water and its Treatment: Hardness of water and its determination, (EDTA
method) units of hardness, alkalinity of water and its determination, Related
 numerical problems, Problems associated with boiler feed water: scale and sludge
formation, Priming and foaming, Boiler corrosion & Caustic embrittlement. Water
softening Techniques: Lime-Soda treatment, Zeolite, Ion – exchange process, Mixed
bed demineralization.

UNIT III Corrosion and its Prevention: Mechanism of Dry and wet corrosion (rusting of
iron), types of corrosion, galvanic corrosion, differential aeration corrosion, stress
corrosion. Factors affecting corrosion, preventive measures (proper design, Cathodic
and Anodic protection, Protective coatings), Soil corrosion, Microbiological
Corrosion.
Lubrication and Lubricants: Introduction, mechanism of lubrication,
classification of lubricants. Additives for lubricants. Properties of lubricants ( Flash
& Fire point, Saponification number, Iodine value, Acid value, Viscosity and
Viscosity index Aniline point, Cloud point and pour point ).

UNIT IV Fuels: Definition and characteristics of a good fuel, Classification of fuels with
suitable examples, Definition and determination of calorific value of a fuel with the
help of bomb calorimeter, Proximate and Ultimate analysis of a fuel and its
importance, Merits and demerits of gaseous fuel over other varieties of fuel,
Composition properties and uses of (i) Water gas (ii) Oil gas (iii) Biogas (iv) LPG
(v) CNG.
 HAS-107C ENVIRONMENTAL STUDIES
B. Tech I/II Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory : 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 Hours

Pre –Requisite: None

Successive: None

Course Objectives:
The prime objective of the course is to provide the students a detailed knowledge on the
threats and challenges to the environment due to developmental activities. The students will
be able to identify the natural resources and suitable methods for their conservation and
sustainable development. The focus will be on awareness of the students about the
importance of ecosystem and biodiversity for maintaining ecological balance. The students
will learn about various attributes of pollution management and waste management practices.
The course will also describe the social issues both rural and urban environment and
environmental legislation.

Course Outcomes (COs): At the end of the program the students acquired knowledge about:
CO 1- Understand / evaluate / develop technologies on the basis of ecological principles and
environmental regulations which in turn help in sustainable development. The
students will also be able to introduce the thinking about environmental issues from
an interdisciplinary perspective.
CO 2- Identify and relate about the renewable and non-renewable resources, their importance
and ways of conservation to sustain human life on earth.
CO 3- Know about the concepts of ecosystem and its function in the environment, the need
for protecting the producers and consumers in various ecosystems and their role in
the food web.
CO 4- Recognize, relate and become sensitive to the effects of pollution and will be able to
contribute his learning’s towards their prevention or mitigation. The students will
also be able to describe the social issues along with the trends of human population
growth and the possible means to combat the challenges.
Syllabus:
UNIT I The Multidisciplinary Nature of Environmental Studies:
Definition, scope and importance. Need for public awareness.

UNIT II Natural Resources: Renewable and Non-Renewable Resources: Natural

resources and associated problems:
 Forest resources: Use and over-exploitation, deforestation, case studies.
Timber extraction, mining, dams and their effects on forests and tribal
people.
 Water resources: Use and over-utilization of surface and ground water,
floods, drought, conflicts over water, dams-benefits and problems.
 Mineral resources: Use and exploitation, environmental effects of extracting
and mineral resources, case studies.
Food resources: World food problems, changes caused by agriculture and
overgrazing, effects of modern agriculture, fertilizer-pesticide problems,
water logging, salinity, case studies.
 Energy resources: Growing energy needs, renewable and non- renewable
energy sources, use of alternate energy sources. Case studies.
 Land resources: Land as a resource, land degradation, man induced
landslides, soil erosion and desertification.
 Role of an individual in conservation of natural resources. Equitable use of
resources for sustainable lifestyles.

UNIT III Ecosystems:

 Concept of an ecosystem. Structure and function of an ecosystem. Producers,

consumers and decomposers.
 Energy flow in the ecosystem. Ecological succession. Food chains, food
webs and ecological pyramids.
 Introduction, types, characteristic features, structure and function of the
following ecosystem:
a) Forest ecosystem b) Grassland ecosystem c) Desert ecosystem d) Aquatic
ecosystems (ponds, streams, lakes, rivers, oceans, estuaries).

UNIT IV Biodiversity and its Conservation:

 Introduction – Definition: genetic, species and ecosystem diversity.

  Biogeographical classification of India. Value of biodiversity: consumptive
use, productive use, social, ethical, aesthetic and option values. Biodiversity at
global, National and local levels.
 India as a mega-diversity nation. Hot-spots of biodiversity. Threats to
biodiversity: habitat loss, poaching of wildlife, man-wildlife conflicts.
Endangered and endemic species of India. Conservation of biodiversity: in-
situ and ex-situ conservation of biodiversity.

UNIT V Environmental Pollution: Definition.

 Causes, effects and control measures of: Air pollution b) Water pollution c)
Soil pollution d) Marine pollution e) Noise pollution f) Thermal pollution g)
Nuclear hazards

 Solid waste Management: Causes, effects and control measures of urban and
industrial wastes. Role of an individual in prevention of pollution. Pollution
case studies. Disaster management: floods, earthquake, cyclone and landslides.

UNIT VI Social Issues and the Environment:

 From Unsustainable to Sustainable development Urban problems related to

energy. Water conservation, rain water harvesting, watershed management.
Resettlement and rehabilitation of people; its problems and concerns. Case
studies.
 Environmental ethics: Issues and possible solutions. Climate change, global
warming, acid rain, ozone layer depletion, nuclear accidents and holocaust.
Case studies. Wasteland reclamation. Consumerism and waste products.
 Environment Protection Act. Air (Prevention and Control of Pollution) Act.
Water (Prevention and Control of Pollution) Act
 Wildlife Protection Act. Forest Conservation Act. Issues involved in
enforcement of environmental legislation
 Public awareness.

UNIT VII Human Population and the Environment: Population growth, variation
among nations. Population explosion – Family Welfare Programme.
Environment and human health. Human Rights. Value Education. HIV/AIDS.
 Women and Child Welfare. Role of Information Technology in Environment
and human health. Case Studies.

UNIT VIII Field Work:

 Visit to a local area to document environmental assets-river / forest / grassland
/ hill / mountain.
 Visit to a local polluted site – Urban / Rural / Industrial / Agricultural.
 Study of common plants, insects, birds.
 Study of simple ecosystems – pond, river, hill slopes, etc.

Text Books:
1. Perspectives in Environmental Studies by A. Kaushik and C. P. Kaushik, New age
international publishers.
2. Environmental Studies by Benny Joseph, Tata McGraw Hill Co, New Delhi
Reference Books:
1. Environmental Science: towards a sustainable future by Richard T. Wright. 2008 PHL
Learning Private Ltd. New Delhi.
2. Environmental Engineering and science by Gilbert M. Masters and Wendell P. Ela .
2008 PHI Learning Pvt Ltd.
3. Environmental Science by Daniel B. Botkin& Edwards A. Keller, Wiley INDIA
edition.
4. Fundamentals of Ecology by Odum, E.P., Barrick, M. and Barret, G.W.Thomson
Brooks/Cole Publisher, California, 2005.

Other background readings:

1. Das, ManojTales Told by Mystics. SahityaAkademi. New Delhi 2001

2. UshaBande. Pointed Vision: An Anthology of Short Stories. Oxford UP. 2002
3. Reference material consisting of poems and material related to Romantic poetry to be
circulated by the teacher consisting of introductory notes on French revolution and
industrial revolution.
 EC- 101C ELEMENTS OF ELECTRONICS ENGINEERING
B. Tech I/II Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory : 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 Hours

Pre –Requisite: None

Successive: Material Science, Mechatronics, Industrial Control

Course Objectives:
Fundamental knowledge in the field of electronics will be provided in this course by
emphasizing on the basic components and circuits like the diodes, BJTs, JFETS, MOSFETS
etc. Such different types of circuitry components/circuits and their applications are introduced
so as to complete the theoretical and practical basis on analog circuit design.

Course Outcomes (COs): At the end of the program the students acquired knowledge about:

CO 1- Basics of digital electronics, solving problems related to number systems and Boolean
algebra, various flip flops.
CO 2- The semiconductors and diodes, transistors, amplifiers and their applications.
CO 3- Display devices like LCDs, LEDs and Optoelectronic devices.
CO 4- Electronic instruments like CRO, function generator and multimeter etc.
CO 5- Basics of Communication system and modulation techniques like AM, FM, PM etc.

Syllabus:

UNIT I Semiconductor Physics: Overview of Semiconductors, PN junction diode and

Zener diode –Diode circuits: rectifiers (bridge type only), filters, clippers and
clampers - BJT construction, operation, characteristics (CB, CE and CC
configurations) and uses – JFET and MOSFET construction, operation,
characteristics (CS configuration) and uses.

UNIT II Digital Electronics: Binary, Decimal, Octal and Hexadecimal number systems
and conversions, Boolean Algebra, De Morgan’s theorem, logic gates (AND, OR,
NOT, NAND, NOR, XOR, XNOR),Combinational and sequential circuits,
Introduction to flip-flops (S-R & J-K).
UNIT III Electronics Instruments: Role, importance and applications of general-purpose
test instruments like Multimeter: Digital & Analog, Cathode Ray Oscilloscope
(CRO), Function/Signal Generator.

UNIT IV Optoelectronic Devices and Displays: Photoconductive cell - photovoltaic cell -

solar cell – photodiodes – phototransistors, Seven segment display: Common anode
and Common cathode connections and applications.
LED DISPLAY: Construction, Working, Advantages, Disadvantages and
Applications.
LCD DISPLAY: Types of liquid crystals; Types of LCD display:- Dynamic
scattering and field effect type; Construction, Working, Advantages, Disadvantages
and Applications.

UNIT V Communication System: Block diagram of a basic communication system –

frequency spectrum - need for modulation - methods of modulation - principles of
AM, FM, PM , pulse analog and pulse digital modulation – AM / FM transmitters
& receivers (block diagram description only)

Text / Reference Books:

1. Sedra A S and Smith K C, “Microelectronic Circuits” 4th Ed., New York, Oxford
University Press, New York (1997).

2. Tocci R J and Widmer N S, “Digital Systems – Principles and Applications”, 8th Ed.,
Pearson Education India, New Delhi (2001).

3. Cooper and Helfrick, “Modern Electronic Instrumentation and Measuring Techniques”, 4th
print Prentice Hall of India, New Delhi (1996)

4. Boylestad and Nashelsky, “Electronic Devices and Circuit Theory”, 8th Ed, Pearson
Education India, New Delhi (2002).

5. Millman and Grabel, “Microelectronics”, 2nd Ed. Tata McGraw-Hill (1999).

 ME-101C BASICS OF MECHANICAL ENGINEERING
B. Tech I / II Semester

No. of Credits: 3 Sessional: 25 Marks

L T P Total Theory : 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 Hours

Pre –Requisite: None

Successive: Thermodynamics, Mechanics of Solids, Manufacturing Processes
Course Objectives:
The main objective of teaching this course is to provide the basic knowledge of mechanical
engineering.

Course Outcome (COs): At the end of the course, the student shall be able to:

CO 1- Understand the basics of thermodynamics and I.C. Engines.

CO 2- Learn about the working of various power transmission devices and lifting machines.
CO 3- Grasp the concept of stresses and strains.
CO 4- Explore basics of manufacturing processes, operations of machine tools and measuring tools.

Syllabus:

UNIT I Basic Concepts of Thermodynamics: Macroscopic and Microscopic Approaches,

Thermodynamic Systems, Surrounding and Boundary, Thermodynamic Properties
– Intensive and Extensive, Thermodynamic Equilibrium, State, Path, Process and
Cycle, Concept of Thermodynamic Work and Heat, Zeroth Law of
Thermodynamics, Energy and First law of Thermodynamics, First law applied to
non flow processes, Internal Energy and Enthalpy. Numerical Problems.

UNIT II I.C. Engines: Introduction, classification, Constructional details and working of 2

stroke & 4 stroke petrol engine & diesel engine, Otto, diesel and dual cycles,
simple problems on Otto & diesel cycles.

UNIT III Simple Lifting Machines: Definition of machine, velocity ratio, Mechanical
advantage, Efficiency, Laws of machines, Reversibility of machine, Wheel and axle,
Differential pulley block, Single, Double and Triple start worm and worm wheel,
Simple and compound screw jacks, Problems.
UNIT IV Basics of Power Transmission: Transmission of mechanical power: introduction
belt drives, gear drives, their advantages and disadvantages. Introduction to brakes
and clutches.

UNIT V Stresses and Strains: Introduction, Concept & types of Stresses and Strains,
Poisons ratio, stresses and Strains in simple and compound bars under axial loading,
Stress– Strain diagrams, Hook’s law, Elastic constants and Mechanical Properties of
metals like mild steel and cast iron.

UNIT VI Basics of Manufacturing Processes and Measurements: Brief introduction to

classification of different manufacturing processes: Primary shaping processes,
metal cutting processes, joining processes, finishing processes and processes
bringing change in properties, Working principle, parts and specification of
commonly used machine tools in workshop such as Lathe, Shaper and Milling.
Measuring Instruments: introduction to slip gauges, Go and No Go gauges, dial
gauges, vernier calliper, micrometer, sine bar, vernier height gauges.

Text Books:
1. Basics of Mechanical Engineering- R.K Rajput Laxmi Pub, Delhi.
2. Elements of Mechanical Engineering- D.S Kumar, S.K Kataria and Sons.
3. Engineering Thermodynamics- P.K Nag TMH, New Delhi.
4. Workshop Technology Vol I & II –Hazra & Chaudhary, Asian Book Comp., New
Delhi.
Reference Books:
1. Engineering Thermodynamics- C.P Arora, Pub- TMH, New Delhi.
2. Manufacturing Science- Amitabha Ghosh & Ashok Kumar Malik, - East- West
Press.
3 Manufacturing Process & Systems- Oswald, Munoz, John Wiley.
4 Workshop Technology Vol I, II & III- Chapman, WAJ, Edward Arnold.
5. Basics of Mechanical Engineering – Vineet Jain, Dhanpat Rai Publications
6. Automobile Engineering by Dr Kirpal Singh, standard Publishers Distributors
 HAS-155C CHEMISTRY LAB
B. Tech I/II Semester

No. of Credits: 1 Sessional: 15 Marks

L T P Total Practical: 35 Marks
0 0 2 2 Total : 50 Marks
Duration of Exam: 2 Hours

Pre –Requisite: Chemistry

Successive: None
Course Objectives: To apply fundamental knowledge of practical chemistry to engineering
and technology.
Course Outcomes (COs): After studying this course the students will be able to:
CO 1- Find out hardness of water quantitatively.
CO 2- Analyse sample of water for many parameters.
CO 3- Learn sample of lubricating oil for many parameters.
CO 4- Prepare polymeric resins in the laboratory.

List of Experiments:

1. Determination of Ca++ and Mg++ hardness of water using EDTA solution.

2. Determination of alkalinity of water sample.
3. Determination of dissolved oxygen ( DO) in the given water sample
4. To find the eutectic point for a two component system by using method of cooling
curve.
5. Determination of viscosity of lubricant by Red Wood Viscosity ( No. 1 & N0. 2 )
6. To determine flash point& fire point of an oil by Pensky Marten’s flash point
apparatus.
7. To Prepare Phenol formaldehyde and Urea formaldehyde resin.
8. To find out saponification no. of Oil
9. To determine TDS of Water samples of different sources.
10. Determination of concentration of KMnO4 solution spectrophotomererically
11. Determination of strength of HCl solution by titrating against NaOH solution
conductometrically.
12. To determine amount of sodium and potassium in a, given water sample by flame
photometer.
13. Estimation of total iron in an iron alloy.
Reference Books:
1. Advanced practical organic chemistry, O P Agarwal, (Krishna publishing).
2. Advanced practical inorganic chemistry, Gurdeep Raj, (Krishna publishing).
3. Advanced practical physical chemistry, J B Yadav, (Krishna publishing).
 ME-151C BASICS OF MECHANICAL ENGINEERING LAB
B. Tech I/II Semester

No. of Credits: 1 Sessional: 15 Marks

L T P Total Practical: 35 Marks
0 0 2 2 Total : 50 Marks
Duration of Exam: 2 Hours

Pre –Requisite: Basics of Mechanical Engineering

Successive: Thermodynamics, Mechanics of Solids, Manufacturing Processes
Course Objectives:
To understand the basics of mechanical engineering by working models and experiments.

Course Outcomes (COs): After studying this course the students will be able to:

CO 1- Understand the basics of working of boilers, mountings and accessories.

CO 2- Grasp the principle and working of two strokes and four strokes internal combustion
engines.
CO 3- Analyse the mechanisms of simple lifting machines.
CO 4 - Exploring the mechanism of gear drive.
CO 5- Learn use of various measuring devices.

List of Experiments:

1. To study the construction and working of Cochran and Babcock & Wilcox boilers.
2. To study the function and working of various mountings and accessories in a boiler.
3. To study the construction and working of 2 stroke & 4 stroke diesel engine.
4. To study the construction and working of 2 stroke & 4 stroke petrol engine.
5. To calculate the mechanical advantage, velocity ratio and efficiency of worm and
worm wheel.
6. To calculate the mechanical advantage, velocity ratio and efficiency winch crab.
7. To study Simple screw jacks and compound screw jacks and determine their
efficiency.
8. Measurement of diameter of shaft using (i) vernier caliper (ii) digital caliper (iii)
vernier micrometer (iv) digital micrometer.
9. Measurement of angle of taper using sine bar.
10. To study the different types of gears.
 HAS-102C PHYSICS II
B. Tech II Semester

No. of Credits: 4 Sessional: 25 Marks

L T P Total Theory : 75 Marks
4 0 0 4 Total : 100 Marks
Duration of Exam: 3 Hours

Pre –Requisite: Physics I

Successive: Engineering Mechanics, Material Science, Micro and Nano Manufacturing
Course Objectives:
This course introduces basic principles of crystal structure along with the defects. Emphasis
is placed on the shortcoming of classical physics at the turn of the century leading to the
discoveries of the modern era. The concepts of quantum mechanics and solid state serve as
the foundation stone for the course. Extensions of these topics will include the modern view
of the atom, wave particle duality of light, distribution of atoms, magnetism and conductivity.
Through this course students will able to understand the basics of Nanotechnology and
Superconductivity.

Course Outcome (COs): At the end of the course, the student shall be able to:

CO 1- Understand the basics of crystal structure and defects in solids. They would also be
able to comprehend Quantum Physics and its relevance in the modern era.
CO 2- Learn the fundamentals of Free electron theory and have an elementary idea of Nano
science and Nanotechnology.
CO 3- Knowing Band theory of solids and Photoconductivity.
CO 4- Comprehend magnetic properties of solids and superconductivity and their
applications in the contemporary world.
.Syllabus:
UNIT I Crystal Structure: Space lattice, unit cell and translation vector, Miller indices,
inter-planar spacing, simple crystal structure (NaCl and Diamond), Bragg’s law,
Laue method, powder method, Point defects in solids – Schottky and Frenkel
defects.
Quantum Physics: Difficulties with Classical physics, Introduction to quantum
mechanics-simple concepts. Black Body radiation, Planck’s radiation law, de-
Broglie hypothesis, phase velocity and group velocity. Schrodinger wave
equations-time dependent and time independent, Particle in a one-dimensional
 box, Elementary idea of Quantum Statistics (Bose-Einstein and Fermi-Dirac
Statistics), distribution function.

UNIT II Nanomaterials and Applications: Basic principle of Nanoscience and

Nanotechnology, synthesis of nanoparticles, techniques- ball milling, sputtering,
plasma synthesis, properties of nanoparticles-mechanical, optical, magnetic and
electronic; introduction to carbon nanotubes.
Free Electron Theory: Elements of classical free electron theory and its
limitations, Drude’s theory of conduction, quantum theory of free electrons.
Fermi level, density of states. Fermi-Dirac distribution function, Concept of
thermionic emission-Richardson equation.

UNIT III Band Theory Of Solids: Origin of energy bands, Kronig-Penny model
(qualitative), E-K diagrams, Brillouin Zones, concept of effective mass and holes.
Classification of solids into metals, semiconductors and insulators, Fermi energy
and its variation with temperature, Hall Effect and its applications.
Photoconductivity & Photovoltaics: Photoconductivity in insulating crystal,
variation with illumination, effect of traps, application of photoconductivity,
photovoltaic cells, solar cell and its characteristics.

UNIT IV Magnetic Properties of Solids: Atomic magnetic moments, orbital

diamagnetism, classical theory of paramagnetism, ferromagnetism- molecular
fields and domains.
Superconductivity: Introduction (Experimental survey), Meissner effect,
London equations, Hard and Soft superconductors, Elements of BCS Theory,
Applications of superconductors

Text Books:
1. Perspectives of Modern Physics - Arthur Beiser (TMH)
2. Optics – Ajoy Ghatak (TMH)
3. Modern Physics for Engineers – S.P.Taneja (R. Chand)
4. Engineering Physics – Satya Prakash (Pragati Prakashan)
5. Modern Engineering Physics – A.S.Vasudeva (S. Chand)
6. Engineering Physics (Vol-2)- S.L. Gupta (Dhanpat Rai)
 HAS-104C MATHEMATICS II
B. Tech II Semester

No. of Credits: 4 Sessional: 25 Marks

L T P Total Theory : 75 Marks
4 0 0 4 Total : 100 Marks
Duration of Exam: 3 Hours

Pre –Requisite: Mathematics I

Successive: Numerical Methods, Operations Research
Course Objectives:
This course will give detailed view of exact differential equations, concept of obtaining
suitable integrating factor, solution of ordinary differential equations with constant
coefficients and variable coefficients. Application, Laplace transforms, Inverse Laplace
transforms, solution of differential equations using laplace transforms, Partial Differential
Equations, Lagrange’s method, Charpit’s method and Solution of homogeneous partial
differential equations and application of partial differential equations to heat and wave
equations, about infinite series, tests for checking convergence and divergence of infinite
series. Checking the absolute convergence of alternating series .

Course Outcome (COs): At the end of the course, the student shall be able to:

CO 1- Acquire knowledge about many kinds of differential equations, different methods to

find the solution of differential equations and applications of differential equations to
solve boundary value problems and simultaneous equations.
CO 2- Acquire knowledge about Laplace transform, Inverse Laplace transform and its
applications.
CO 3- knowledge about formation of partial differential equation, method to solve linear and
non linear partial differential equation and method of separation of variable to solve
heat and wave equation.
CO 4- Infinite series and different tests to check the convergence and divergence of Infinite
series.
.Syllabus:
UNIT I Ordinary Differential Equation and its Applications: Exact differential equation
of first order, Equations reducible to exact differential equation, differential
equation of second and higher order, Complete solutions of linear differential
equations( Complementary Function + Particular Integral), Method of variation of
parameter to find Particular Integral, Cauchy’s and Legendre’s linear Equation,
 Simultaneous linear equations with constant co-efficient, Application of linear
differential equations to Electric circuits(LC,LCR circuit), Newton’s law of
cooling, Heat flow, Orthogonal trajectory.

UNIT II Laplace-Transforms and its Applications: Laplace-transforms of elementary

functions, Elementary properties of Laplace-transforms, Existence conditions,
Transforms of derivatives, Transforms of Integrals, Multiplications by t n, division
by t, Evaluation of integrals by Laplace –transforms, Second shifting Theorem ,
Inverse transforms, Convolution theorem, Applications to linear differential
equations to solve boundary value problems with constants coefficients and
simultaneous linear differential equations with constant coefficients.

UNIT III Partial Differential Equation and its Application: Formation of partial-
differential equations. Lagrange’s linear partial –differential equations. First order
non-linear partial differential equations, Charpit’s method. Homogeneous Partial-
differential equation of second and higher order, Method of Separation of
Variables and its applications to wave equation and one dimensional Heat
equation.

UNIT IV Infinite Series: Convergence and divergence of Infinite series, Comparison

Test, D’Alembert’s Ratio Test, Gauss Test, Integral Test, Raabe’s Test,
Logarithmic Test, Cauchy’s Root Test, Alternating Series, Conditional
Convergence & Absolute Convergence.

Text/ Reference Books:

1. B.S. Grewal – Engineering Mathematics
2. Advanced Engineering Mathematics, Erwin Kreyzig
3. Advanced Engineering Mathematics, Dr. Babu Ram, Pearsons Publications.
4. Engineering Mathematics Seventh Edition by John Bird ,Published by Newnes.
5. Advanced Engineering Mathematics, K.A. Stroud, Dexter Booth, Published by
Palgrave.
 HAS-109C INTERACTIVE ENGLISH
B. Tech I/ II Semester

No. of Credits: 3 Sessional: 25 Marks

L T P Total Theory : 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 Hours

Pre –Requisite: None

Successive: None
Course Objectives:
To read and discuss text of a chosen Shakespearean tragedy and make students familiar with
Romantic poetry in English literature so as to help the students enhance their understanding
of value of literature in wider socio-historical context by evoking examples from Elizabethan
England, the French revolution and Industrial revolution. Thereby to furnish examples from
the literary canon to be first emulated and later critiqued in creative and critical writing. At
the same time, to hone the skills of students in written communication by working on the
vocabulary of students so they can express themselves clearly and persuasively.

Course Outcome (COs): At the end of the course, the student shall be able to:

CO 1- Students are conversant with representative texts of Shakespeare and Romantic poetry.
They also understand the historical context of these literary works.
CO 2- Students are able to communicate effectively in corporate environment.
CO 3- Inculcate critical thinking and demonstrate an ability to articulate their thoughts
coherently and creatively.
CO 4- Command a better vocabulary and express their thoughts clearly and precisely.
.Syllabus:
UNIT I Literature: Shakespeare’s Macbeth(story adaptation of play); Romantic poetry-
‘The Chimney Sweeper’ by Blake, ‘To Autumn’ by John Keats, 'The Rainbow' by
William Wordsworth, ‘Ozymandias’ by PB Shelley, ‘The Rime of the Ancient
Mariner’ (text of 1834) –Part-I and Part-II by Samuel Coleridge, Historical context
of Romantic poetry-French Revolution and Industrial revolution.

UNIT II Functional English: Report Writing- hypothesis-evidence-thesis,

Proposals/Feasibility and Progress Reports/Memo/Letter formats;
Essays/paragraphs; applications; description of objects, appliances, instruments,
products, processes.
UNIT III Critical thinking and Creative Writing: Critical thinking; creative writing
exercises; Seven Cs of writing/ Story composition/news reports/ feature
writing/verse composition, Paraphrasing poems, comprehending Unseen Passages,
writing biographies, art of interviewing, book reviews.

UNIT IV Semantics and Syntax: Antonyms, synonyms, homophones, words often

confused, one word substitutes, word origins, sentence correction/error correction
exercises in basic grammar.

References:
1. Shakespeare Readers. VolumeI. Macbeth. Scholastic India, 2016.
2. Michael Neill, David Schalkwyk. The Oxford Handbook of Shakespearean
Tragedy. Oxford UP. 2016
3. Claire McEachern.The Cambridge Companion to Shakespearean Tragedy.
Cambridge UP. 2013
4. RC Sharma and Krishna Mohan. 4th edition. Business Correspondence and Report
Writing. McGraw Hill.
5. Bretag, Crossman, and Bordia. Communictaion Skills. TatMcGraw Hill.2012
6. A.C. Bradley and John Bayley. Shakespearean Tragedy. Penguin Books.1991

Other Background Readings:

1. Das, Manoj Tales Told by Mystics. Sahitya Akademi. New Delhi 2001
2. Usha Bande. Pointed Vision: An Anthology of Short Stories. Oxford UP. 2002
3. Reference material consisting of poems and material related to Romantic poetry to be
circulated by the teacher consisting of introductory notes on French revolution and
industrial revolution.
 EE-101C BASIC ELECTRICAL ENGINEERING
B. Tech I / II Semester

No. of Credits: 3 Sessional: 25 Marks

L T P Total Theory : 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 Hours
Pre –Requisite: None
Successive: Power Plant Engineering
Course Objectives:
 To impart the basic knowledge about the DC circuits and various Network Theorems.
 To inculcate the understanding about the single phase A.C circuits and Poly phase
system.
 To understand the working of various Electrical Machines.
 To introduce the basic knowledge of various source of electrical power.
.Course Outcome (COs): At the end of the course, the student shall be able to:
CO 1- Understand and solve the problems of DC Circuit and Network theorems.
CO 2- Solve problems related to single phase and three phase AC circuits.
CO 3- Explain the working principle, construction and applications of Electrical machines.
CO 4- Working of various power plants (thermal, hydro electric, gas, wind, solar etc.)

Syllabus:

UNIT I DC Circuits: Introduction of electric circuit, ohm’s law, limitations of ohm’s law,
ideal, Practical and dependent sources and their characteristics, Source
transformation, Voltage and Current division, Kirchhoff’s Voltage law and
Kirchhoff’s Current law; Mesh and Nodal analysis, star-delta transformation.

UNIT II AC Fundamental: Production of alternating voltage or current, phasor

representation of alternating quantity, instantaneous, Peak, Average and RMS
values of periodic waveforms; Peak factor, Form factor; pure R,L & C in AC
circuit, j notation and concept of phasor, active, reactive and apparent power,
Power factor, AC series circuit RL, RC, and RLC, AC parallel circuits,
combination of series and parallel circuits, Series and Parallel resonance,
selectivity, bandwidth and Q factor, Earthing.
UNIT III Network Theorems: Superposition, Thevenin’s and Norton’s, Reciprocity,
Compensation, Maximum Power transfer, Tellegan’s and Millman’s theorems,
Application of theorems to dc and ac circuits.

UNIT IV Polyphase Systems: Advantages of 3-phase systems, generation of 3-phase

voltages; phase sequence; star & delta connections; interconnection of 3-phase
sources and loads; voltage, current & power in star & delta connected systems,
analysis of 3-phase balanced circuits, measurement of 3-phase power- 2 wattmeter
method, effect of power factor on wattmeter reading.

UNIT V Electrical Machines: Introduction to transformer, DC machines, induction motor,

synchronous machines; Principle, construction and working.

UNIT VI Sources of Electrical Power: Introduction to wind, solar, fuel cell, tidal, hydro
electric, thermal, diesel, gas, nuclear power plants.

Text Books:
1. Basic Electrical Engineering by Kothari & Nagrath, TMH
2. Principles of Electrical Engineering by V. Del Toro, Prentice Hall
3. Electrical Technology by B L Thareja, S.Chand
 CE-101C FUNDAMENTALS OF COMPUTER AND PROGRAMMING WITH C
B.Tech I/II Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory: 75 Marks
3003 Total: 100 Marks
Duration of Exam: 3 Hours
Pre-Requisite: None
Successive: Kinematics of Machines and Operations Research

Course Objectives:
1. Learn major components of computer system, programming languages and
networking concepts.
2. Understand the basic building blocks of C language like variables, data types,
managing I/O etc.
3. Knowing the different statements like sequential, decision making, iterative such as
if-else, loops and derived data types like arrays, structures etc.
4. Concept of Pointers and understand functions and file handling.
Course Outcomes (COs): After the successful completion of the course, student is able to:
CO 1- Learn the major components of computer system, programming language and
Networking.
CO 2- Understand the building blocks of C language like variables, data types, managing I/O
etc.
CO 3- Understand the different statements like sequential, decision making, iterative such as
if-else, loops and derived data types like arrays and structures.
CO 4- Learn about the concept of Pointers and understand functions and file handling.

Syllabus:
UNIT I An Overview of Computer System and Operating Systems: Fundamentals:
Hardware organization of a computer, CPU, Input/ Output Devices, Memories,
Registers, Ports.
Different Number Systems:- Decimal Number System, Binary Number System,
Octal Number System, Hexadecimal Number System, and their inter-
conversions.
Operating System Basics: Introduction to Operating system, Functions of an
Operating Systems, Classification of Operating Systems.
UNIT II Basic Introduction to Programming Languages: Machine Language,
Assembly Languages, High level Languages, Types of high level languages,
Complier, Interpreter, Assembler, Loader, Linker, Relationship between
Compiler, Loader and Linker. Flowcharts.
UNIT III Basic Introduction to Computer Networks: LAN, MAN, WAN, OSI
Reference model, Introduction to Internet and protocols: TCP/IP ref. model,
Network connecting devices. Hypertext documents, HTTP, DNS, Network
Security.
UNIT IV An Overview of C: Basic and Derived Data Types: Constants, Variables and
Data types, operators and Expressions, managing I/O operations, Decision
Making, branching and looping, Derived Data Types like Arrays, Strings.
Structure and Union in C: Defining structure, declaring variables, Accessing
structure members, structure initialization, copying and comparing structures
variables, operations on individual members, Array of structure, structure with
structure, unions.
UNIT V Pointers in C: Introduction, Understanding Pointers, Accessing the address of a
variable, Declaring Pointer Variables, Initialization of Pointer Variables, Pointer
Expressions, Pointer Increments and Scale Factors, pointers and Arrays, Pointer
and Character Strings, Pointers as Function Arguments, Pointers to Functions.
UNIT VI File Management in C: Defining and opening file, closing file, I/O operation on
files, error handling during I/O operations.
Text Books:
1. Fundamental of Information Technology by A.Leon &M.Leon.
2. Let Us C by Yashwant Kanetkar.
3. Fundamentals of Computers and Programming with C by A. K. Sharma Dhanpat
Rai publications.
Reference Books:
1. Programming in C by Schaum Series.
2. Computer Networks (4th Edition) by Andrew S. Tanenbaum
3. Digital Principles and Application by Donald Peach, Albert Paul Malvino
4. Operating System Concepts, (6th Edition) by Abraham Silberschatz, Peter Baer
Galvin, Greg Gagne.
 ME-152C PHYSICS LAB II
B. Tech II Semester

No. of Credits: 1 Sessional: 15 Marks

L T P Total Practical: 35 Marks
0 0 2 2 Total : 50 Marks
Duration of Exam: 2 Hours

Pre –Requisite: Physics I

Successive: None
Course Objectives:
To develop the domain knowledge in the fields of physics and to extend knowledge and
processes used by physics have produced new and exciting technologies that are in everyday
use.

Course Outcomes (COs): After studying this course the students will be able to:

CO 1- To demonstrate competency and understanding of the basic concepts found in core

physics courses mechanics, quantum mechanics, magnetic properties,
photoconductivity and modern physics.
CO 2- To utilize the scientific method for formal investigation and to demonstrate
competency with experimental methods that are used to discover and verify the
concepts related to content knowledge.
List of Experiments:

1. To find the low resistance by carey - Foster's bridge.

2. To find the resistance of a galvanometer by Thomson’s constant diffelction method
using a post office box.
3. To find the value of high resistances by Substitution method.
4. To find the value of high resistances by Leakage method.
5. To study the characteristics of a solar cell and to find the fill factor.
6. To find the value of e/m for electrons by Helical method.
7. To find the ionisation potential of Argon/Mercury using a thyratron tube.
8. To study the variation of magnetic field with distance and to find the radius of coil by
Stewart and Gee's apparatus.
9. To study the characteristics of (Cu-Fe, Cu-Constantan) thermo couple.
10. To find the value of Planck's constant by using a photo electric cell.
11. To find the value of co-efficient of self-inductance by using a Rayleigh bridge.
12. To find the value of Hall Co-efficient of semi-conductor.
 13. To study the V-I characteristics of a p-n diode.
14. To find the band gap of intrinsic semi-conductor using four probe method.
15. To calculate the hysteresis loss by tracing a B-H curve.
Text/ Reference Books:
1. Advanced Practical Physics – B.L. Worshnop and H.T. Flint (KPH)
2. Practical Physics – S.L.Gupta&V.Kumar (PragatiPrakashan).
3. Advanced Practical Physics Vol.I& II – Chauhan & Singh (PragatiPrakashan).
 CE-151C FUNDAMENTALS OF COMPUTER AND PROGRAMMING WITH C
LAB
B. Tech I/II Semester

No. of Credits: 1 Sessional: 15 Marks

L T P Total Practical: 35 Marks
0 0 2 2 Total : 50 Marks
Duration of Exam: 2 Hours
Pre –Requisite: FOCP
Successive: Kinematics of Machines, Operations Research
Course Objectives:
1. To understand the basic building blocks of C language like variables, data types,
managing I/O etc.
2. To understand the different statements like sequential, decision making, iterative such
as if-else, loops and derived data types like arrays, structures etc.
3. To learn about the concept of Pointers and understand functions and file handling.

Course Outcomes (COs): After studying this course the students will be able to:

CO 1- Implement the different statements like sequential, decision making, iterative such as
if-else, loops and derived data types like arrays and structures.
CO 2- Learn the concept of Pointers and understand functions, file handling.

List of Experiments:
1. Write a Program to calculate sum of two numbers

2. Write a Program to calculate Simple Interest.

3. Write a Program to find larger among two numbers

4. Write a Program to find largest among three numbers

5. Write a Program to calculate roots of a quadratic equation

6. Write a Program to print 1 to 10 using loop

7. Write a Program to print even numbers from 2 to 100

8. Write a Program to print sum of digits of a number

9. Write a Program to print the reverse of a number entered by user

 10. Write a Program to print table of a number

11. Write a Program to print the Fibonacci series

12. Write a Program to calculate factorial of a number

13. Write a Program to find a^b

14. Write a Program to check if number is Prime

15. Write a Print first n terms of Fibonacci Series

16. Write a Program to find largest and smallest element in an array

17. Write a Program to find sum of two 2-D arrays

18. Write a Program to multiply two 2-D arrays

19. Write a Program to use inbuilt string functions.

20. Write a Program to check whether entered string is palindrome

21. Write a Program to calculate factorial of a number using functions

22. Write a Program to find factorial using recursion

23. Write a Program to find length of a string using pointers

24. Write a Program to calculate marks using array of structures.

25. Write a Program to copy the contents of one file to another file

Reference Books:
1. Let Us C by Yashwant Kanetkar
2. Fundamentals of Computers and Programming with C by A. K. Sharma
Dhanpat Rai publications
3. Test your C Skills by Yashwant Kanetkar
 EE-151C BASIC ELECTRICAL ENGINEERING LAB
B. Tech I/II Semester
No. of Credits: 1 Sessional: 15 Marks
L T P Total Practical: 35 Marks
0 0 2 2 Total : 50 Marks
Duration of Exam: 2 Hours

Pre –Requisite: Basic Electrical Engineering

Successive: None

List of Experiments:

1. To verify KCL and KVL.

2. To verify Thevenin’s & Norton's theorems.
3. To verify maximum power transfer theorem.
4. To verify Superposition theorems.
5. To study frequency response of a series R-L-C circuit and determine resonant
frequency & Q- factor for various Values of R, L, C.
6. To study frequency response of a parallel R-L-C circuit and determine resonant
frequency & Q -Factor for various values of R, L, C.
7. To find inductance of coil without core and with iron core.
8. To perform polarity test on single phase transformer.
9. To perform O.C. and S.C. test on single phase transformer.
10. To study various type of electrical instruments
11. To measurement of power and power factor in a three phase system by two wattmeter
method.
 HAS-159C LANGUAGE LAB
B. Tech I/II Semester

No. of Credits: 1 Sessional: 15 Marks

L T P Total Practical: 35 Marks
0 0 2 2 Total : 50 Marks
Duration of Exam: 2 Hours
Pre –Requisite: Interactive English
Successive: None
Course Objectives:
To guide the students to improve their conversational and linguistic skills including better
command over spoken English. Introduce students to various scenarios to help them opt for
appropriate responses on interpersonal level.

Course Outcomes (COs): The students will be trained to respond better to new scenarios
that demand good communication skills.

1. The students will be able to resolve potential conflicts by avoiding communication

gaps and overcoming barriers.
2. Students will learn to use skills effectively for enhancing performance and even
improving upon their power to persuade.

Corporate Interaction & Communication

1. Presentations
2. Listening Skills & Language Lab (Practical) Interviews of Isaac Asimov, Richard
Feynman, Steve Jobs and other scientists and technocrats. Other inspiring
speeches on social issues as well as related to the corporate world and industry;
Audio/Video Lessons and Observation
3. Group Discussions, Corporate Dialogue: Conflict-Resolution exercises; Role Play;
Mock-interviews.
4. Internal Assessment: based on participation, short presentation & performance in
interactive exercises: competence gauged through participation in various events
organized in the classroom and at university level throughout the semester.

Recommended:

1. Language Lab Software

 ME-152C ENGINEERING DRAWING
B. Tech I/II Semester
No. of Credits: 2
L T P Total Sessional: 30 Marks
0 0 4 4 Practical: 70 Marks
Total : 100 Marks
Duration of Exam: 3 Hours
Pre-Requisite: None
Successive: Machine Drawing, Computer Aided Design

Course Objectives:
To understand the basic principles of engineering drawing and graphics and to apply the
same to daw different types of projections.
Course Outcomes (COs): At the end of the course, the student shall be able to:

CO 1- Understand the basic principles of projections of points and lines.

CO 2- Know the different orientations and projections of planes.
CO 3 – Learn projections and sectioning of solids in different orientations.
CO 4- Grasp the concepts of development of surfaces.
CO 5- Draw orthographic and isometric view of an object.

Syllabus:
UNIT I Introduction and Projections of Points: Importance and scope of Engineering
Drawing, Instruments, Lettering, Types of lines, Dimensioning, Different
methods of projections, B.I.S Specifications, Introduction to AutoCAD.
Introduction to plane of projection, reference & auxiliary planes, projection of
points in different quadrants.

UNIT II Projection of Lines: Projection of lines parallel to reference planes, perpendicular

to reference planes, inclined to one reference plane and parallel to the other,
inclined to both the reference planes, traces, true inclinations & true lengths of the
lines.

UNIT III Projection of Planes: Parallel to one reference plane, inclined to one plane but
perpendicular to the other, inclined to both reference planes.
UNIT IV Projections and Sectioning of Solids : Projection of Polyhedra, solids of
revolution-in simple positions with axis perpendicular to a plane, with axis
parallel to both planes, with axis parallel to one plane and inclined to the other.
Projection of section of prisms, pyramids, cylinders and cones with axis
perpendicular to one reference plane and parallel to the other reference plane.

UNIT V Development of Surfaces: Development of simple object with and without

sectioning.

UNIT VI Orthographic and Isometric Projections: Orthographic projections of simple

machines components and Nuts, Bolted Joints, Screw threads.
Introduction to isometric projections, Isometric scale, Isometric projections/
views of plane figures like prisms, pyramids, cylinders and cones.

Text Books:

1. Machine Drawing - N D Bhatt and V M Panchal, Charotar Publishing House.

2. A Text Book of Machine Drawing - P S Gill Pub.: S K Kataria & Sons.
3. Engineering Graphics and Machine Drawing – M. L. Aggarwal and Sandhya Dixit,
Dhanpat Rai & Company.
4. Engineering Graphics with Auto CAD 2002 - James D. Bethune, Pearson
Education.
5. A Text Book of Machine Drawing by Laxmi Narayana and Mathur, M/s. Jain
Brothers, New Delhi.
6. Machine Drawing by N. Sidheshwar, Kannaieh, V S Sastry, TMH., New Delhi.
7. Fundamentals of Engineering Drawing by Luzaddder: PHI.
8. Fundamentals of Engineering Drawing by French and Vierk; Mc Graw Hill.
 WS- 161C/ WS- 162C WORK SHOP-1/II
B. Tech I/ II- Semester

No. of Credits: 3 Internal: 30 Marks

L T P Total External: 70 Marks
0 0 6 6 Total : 100 Marks
Duration of Exam: 3 Hours

MECHANICAL WORKSHOP ( Group –I)

Course Outcomes (COs): After studying this course the students would:
CO 1- Have exposure to mechanical workshop layout and safety aspects.
CO 2- Understand the functions of various machines and cutting tools used in machine shop.
CO 3- Practice real time job preparation using various operations related to machine shop
such as filing, drilling, milling & turning.
CO 4 - Practice job preparation in welding shop.
CO 5 - Learn to use different measuring tools like verniercaliper, vernier height gauge and
micrometer.
CO 6 - Practice job preparation in sheet metal shop.

List of Exercises:
Fitting, sheet metal and welding workshop:
1. To study layout, safety measures anddifferent engineering materials (mild steel,
medium carbon steel, high carbon steel, high speed steel and cast iron etc) used in
workshop.
2. To study and use of different types of tools, equipments, devices & machines used
in fitting, sheet metal and welding section.
3. To determine the least count of vernier calliper, vernier height gauge, micrometer
and take different reading over given metallic pieces using these instruments.
4. To study and demonstrate the parts, specifications & operations performed on lathe
machine.
5. To study and demonstrate the parts, specifications & operations performed on
milling machine.
6. To studyand demonstrate the parts, specifications & operations performed on shaper
machine.
7. To prepare a job involving different type of filing practice exercise in specified
dimensions.
 8. To prepare a job involving multi operational exercise (drilling, counter sinking,
tapping, reaming, hack sawing etc.)
9. To prepare a multi operational sheet metal job (self secured single groove
joint/ hasp & stay etc.).
10. To practice striking an arc, straight short bead, straight continuous bead and re-
start of electrode in flat position by arc welding on given M.S. plate as per size.
11. To practice tack weld of two close plate in flat position by arc welding on given
M.S. plate as per size.
12. To practice close butt joint in flat position by arc welding on given M.S. plate as
per size.

NOTE: - At least nine exercises should be performed from the above list; remaining
three may either be performed from above list or designed by the concerned
institution as per the scope of the syllabus and facilities available in institute.
 WS- 161C/ WS- 162C WORKSHOP- I/II

B.Tech I/II Semester

No. of Credits: 3
L T P Total Internal: 30 Marks
0 0 6 6 External: 70 Marks
Total: 100 Marks
Duration of Exam: 3 Hours
(Group –II)
PART-A
Computer Engineering Workshop
Course Outcomes (COs): After the completion of the course the student will be able to:

CO1- Acquire skills in basic engineering practice.

CO2- Have working knowledge of various equipments used in workshop.
CO3- Have hands on experience about various machines and their components.
CO4- Obtain practical skills of basic operation and working of tools used in the workshop.

1. To study and demonstrate Block diagram of Digital Computer System and brief explanation
of each unit.
2. To demonstrate History/ Generation/ classifications and different types of Personnel
Computer.
3. To study and demonstrate internal parts of a Computer System (Card level) and other
peripheral devices and explanation of POST & BIOS.
4. To study and demonstrate primary memory and secondary memory.
5. To demonstrate CPU Block diagram and other Peripheral chips, Mother Board/ Main Board
and its parts, Connectors, Add On Card Slots etc.
6. To study working of various types of monitors: CRT type, LCD type & LED type.
7. To study Keyboard and Mouse: Wired, Wireless, Scroll & Optical with detail working.
8. To study Printers: Dot Matrix Printers, Daisy wheel Printers, Ink-Jet Printers and Laser Jet
Printers with detailed working explanation.
9. Assembly / Installation and Maintenance of Personnel Computer Systems: Practical exercise
on assembly of Personnel Computer System, Installation of Operating System: Windows &
Linux etc, Installation of other Application Softwares and Utility Softwares, Fault finding in
 Personnel Computers: Software or Hardware wise, Virus: Introduction, its Types & Removal
techniques, Data Backup and Restore, Data Recovery Concepts, Typical causes of Data loss.
10. To demonstrate networking concepts: Introduction of Connecting devices: Hub, Switch &
Router etc, Networking Cable preparation: Normal & Cross Cables, Data Transferring
Techniques from one Computer System to another Computer System, Configuration of
Switch/ Routers etc.
PART-B
Electrical Workshop

1. Introduction of Electrical Safety precautions, Electrical Symbols, Electrical Materials,

abbreviations commonly used in Electrical Engg. and familiarization with tools used in
Electrical Works.
2. To make a Straight Joint & Tee joint on 7/22 PVC wire and Britannia Joint on GI wire.
3. To study fluorescent Tube Light, Sodium Lamp and High Pressure Mercury Vapour
Lamp.
4. To study different types of earthingand protection devices e.g. MCBs, ELCBs and fuses.
5. To study different types of domestic and industrial wiring and wire up a circuit used for
Stair case and Godown wiring.
6. To make the connection of fan regulator with lamp to study the effect of increasing and
decreasing resistance in steps on the lamp.
7. To fabricate half wave and full wave rectifiers with filters on PCB.
8. Maintenance and Repair of Electrical equipment i,e Electric Iron , Electric Toaster ,
Water heater, Air coolers and Electric Fans etc.
9. To study soldering process with simple soldering exercises.
10. To make the connection of a three core cable to three pin power plug and connect the
other cable end by secured eyes connection using 23/0.0076”or 40/0.0076” cable.
 PART- C
Electronics Workshop

1. To study and demonstrate basic electronic components, Diode, Transistor, Resistance,

Inductor and capacitor.
2. To study and demonstrate resistance color coding, measurement using color code and
multimeter and error calculation considering tolerance of resistance.
3. To study and demonstrate Multimeter and CRO- front panel controls, description of block
diagram of CRT and block diagram of CRO.
4. To study and demonstrate Vp(peak voltage),Vpp(peak to peak voltage), Time, frequency and
phase using CRO.
5. Introduction to function generator. Functions of front panel controls and measurement of
different functions on CRO.
6. To study and demonstrate variable DC regulated power supply, function of controls and DC
measurement using multimeter and CRO.
7. Soldering practice on wire mesh or a resistance decade board includes fabrication, soldering,
lacing, harnessing forming and observation.
8. Testing of components using multimeter and CRO like diode, transistor, resistance capacitor,
Zener diode and LED.
9. To study and demonstrate rectification, half wave, Full wave and bridge rectifier. Fabrication,
assembly and waveform observation.
10. To design and fabricate a printed circuit board of a Zener regulated/ series regulated power
supply and various measurements, testing of power supply.

Note: At least 8 exercises are to be performed from each part by the students.
 ME-201C MECHANICS OF SOLIDS
B. Tech (Mechanical Engineering) III Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory: 75 Marks
3003 Total: 100 Marks
Duration of Exam: 3 Hours

Pre-Requisite: Basics of Mechanical Engineering, Elementary Engineering Mechanics

Successive: Advance Strength of Materials, Machine Design

Course Objectives:
To study concept of stress and strain induced in material. To study the concept of stresses in
beams, columns and struts. To study shear force, bending moment in cantilever and beams
and torsion in circular shaft.

Course Outcomes (COs): After studying this course, students will be able:
CO 1- Evaluate the strength of various structural elements internal forces such as
compression, tension, shear, bending and torsion and compound stresses.
CO 2- Understand the basic concept of analysis and design of members subjected to torsion
and bending.
CO 3- Analyse crushing and buckling of structural elements such as columns and struts and
predict the failure by using theories of failures.
CO 4- Analyse the effect of shearing force and bending moments under various loading
condition.

Syllabus:

UNIT I Simple Stresses & Strains: Concept & types of Stresses and Strains, Poison’s
ratio, stresses and strains in simple and compound bars under axial loading, stress
strain diagrams, Hooks law, elastic constants & their relationships, temperature
stresses & strains in simple & compound bars under axial loading, principle
stresses and principal- planes, Mohr’s circle of stresses. Problems.

UNIT II Shear Force & Bending Moment: Definitions, SF & BM diagrams for cantilevers,
simply supported beams (i) concentrated loads, (ii) uniformly distributed loads
over whole span or a part of it, (iii) combination of concentrated loads and
uniformly distributed loads. Problems.
UNIT III Torsion in Circular Shaft: Introduction, pure torsion, assumptions, derivation of
torsion equation for circular shafts, torsional rigidity and polar modulus Power
transmitted by a shaft, combined bending and torsion. Problems.

UNIT IV Bending & Shear Stresses in Beams: Bending stresses in beams with derivation
& application to beams of circular, rectangular, I and T sections, composite beams,
shear stresses in beams with combined bending, torsion & axial loading of beams,
Deflection of beams- moment area method, double integration method. Problems.

UNIT V Columns & Struts: Column under axial load, concept of instability and buckling,
slenderness ratio, derivation of Euler’s formulae for the elastic buckling load,
Eulers, Rankine, Gordom’s formulae Johnson’s empirical formula for axial loading
columns and their applications, eccentric compression of a short strut of
rectangular & circular sections. Problems.

UNIT VI Theories of Elastic Failure: Various theories of elastic failures with derivations
and graphical representations, applications to problems of 2- dimensional and 3
dimensional stress system with (i) Combined direct loading and bending, and (ii)
combined torsional and direct loading. Problems.
Text Books:
1. Strength of Materials – G.H.Ryder - Macmillan, India
2. Strength of Materials– Andrew Pytel and FredinandL.Singer, Addison – Wesley
3. Strength of Material- Sadhu Singh- Khanna Publishers
Reference Books:
1. Strength of Materials – Popov, PHI, New Delhi.
2. Strength of Materials: A Rudimentary Approach – M.A. Jayaram, Sapna Book House,
Bangalore.
3. Mechanics of solids--- Bear and Johnston, McGraw-Hill Companies.
Web Links:

http://nptel.ac.in/courses/112107147/4

http://freevideolectures.com/Course/2361/Strength-of-Materials
 ME-203C FLUID MECHANICS
B.Tech (Mechanical Engineering) III Semester

No. of Credits: 4 Sessional : 25 Marks

L T P Total Theory : 75 Marks
3 1 0 4 Total : 100 Marks
Duration of Exam. : 3 Hours

Pre-Requisite: None
Successive: Fluid Machines, Heat and Mass Transfer

Course Objectives:
To learn the various fluid properties; concept of continuity equation and Bernoulli’s; concept
of laminar and turbulent flow; various losses through pipes.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Expedite the properties of fluid along with pressure measurement techniques and
concept of stability.
CO 2- Understand the characteristics of fluid and application of continuity and Bernoulli’s
equation.
CO 3- Conceptualisation of boundary layer, laminar and turbulent flow.
CO 4- Analyse flows through pipes and open channels.

Syllabus:

UNIT I Introduction and Fluid Statics: Fluid and flow definitions and types; Properties of
fluids; Continuum; Pascal’s Law; Hydrostatic Law; Forces on plane and curved
surfaces; stability of floating and submerged bodies; Determination of metacentric
height.

UNIT II Fluid Kinematics: Lagrangian & Eulerian approach; Classification of fluid flows;
Flow lines; Continuity equation; Stream function; Potential function; Rotational
flow, Circulation and Vorticity; Flow Nets.

UNIT III Fluid Dynamics: Concept of system and control volume; Navier Stokes’s
equation; Euler’s equation; Bernoulli’s equation; Venturimeter, Orificemeter,
Rotameter, Notches and Pitot tube; Force Momentum Equation.
UNIT IV Laminar and Turbulent Flow: Reynold’s experiments; Laminar Flow between
two stationary parallel plates; Hagen- Poiseuilli law; Prandtl mixing length
hypothesis; Velocity distribution in pipes; Concept of smooth and rough pipes;
Pipe friction factor relations.
Boundary layer concept; Von-Karman momentum integral equation; Laminar and
Turbulent boundary layer flows; Drag on a flat plate; Boundary layer separation
and control.

UNIT V Flow in Pipes: Major and Minor Losses in pipe; Total and Hydraulic gradient line;
Pipes in series and parallel; Concept of equivalent pipe; Power transmission
through pipes.

UNIT VI Flow in Open Channels: Classification of open channels; Flow analysis;

Empirical relations; Economical sections for maximum discharge; Most
economical channels i.e. rectangular, trapezoidal and circular; Hydraulic Jump.

Text Books:
1. Fluid Mechanics – Streeter V L and Wylie E B; McGraw Hill
2. Mechanics of Fluids – I H Shames; McGraw Hill
Reference Books:
1. Fluid Mechanics and Fluid Power Engineering – D.S. Kumar; S.K. Kataria and Sons, New
Delhi.
2. Introduction to Fluid Mechanics and Fluid Machines – S.K. Som and G. Biswas; TMH
Publications, New Delhi.
3. Fluid Mechanics and Machinery – S.K. Agarwal; TMH; New Delhi.
4 Fluid Mechanics by Frank M. White; McGraw Hill.
 ME-205C ENGINEERING MECHANICS
B. Tech (Mechanical Engineering) III Semester

No. of Credits: 4 Sessional : 25 Marks

L T P Total Theory : 75Marks
3 1 0 4 Total : 100 Marks
Duration of Exam. : 3 Hours
Pre-Requisite: Physics
Successive: Kinematics of Machines, Dynamics of Machines, Mechanics of Solids

Course Objectives:
To study the various concepts of particle kinematics, analysis of basic force system. To study
about particle dynamics, general equation of equilibrium, energy methods & momentum
methods.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Understand the basic force system.
CO 2- Apply principles of particle kinematics.
CO 3- Grasp the concepts of particle dynamics.
CO 4- Learn energy methods & momentum methods.

Syllabus:
UNIT I Review of Basic Force Systems: Dimensions and units of mechanics,
idealization of mechanics, laws of mechanics, vector algebra review, moment
of a force about a point and axis, the couple and couple moment, addition and
subtraction of couples, moment of a couple about a line, resultant of a force
system, Problems (vector method).
UNIT II Equilibrium: Introduction, free body diagram, control volumes, general equations
of equilibrium, two point equivalent loading, static in-determinacy, simple
truss, method of joints, method of sections, co-planer cable-loading a function
of x, coplanar cables- loading the weight of the cable itself. Problems.
UNIT III Properties of Surfaces & Moments and Products of inertia : First
moment of an area and the centroid, principal axes, formal definition of
inertia quantities, relation between mass-inertia terms and area-inertia
terms, translation of coordinate axes, transportation properties of the inertia
 terms, a brief introduction to tensors, the inertia of ellipsoid and principal
moments of inertia, Problems (vector method).
UNIT IV Kinematics of Particles and Rigid Bodies: Velocity and acceleration in
path and cylindrical coordinates, motion of a particle relative to a pair of
translating axes, translation and rotation of rigid bodies, Chasles theorem,
moving references, velocity and acceleration for different references.
Problems (vector method).
UNIT V Particle Dynamics, Energy Methods & Momentum Methods: Newton's law
for rectangular coordinates & cylindrical coordinates, rectifier translation,
central force motion, Newton's law for path variables, work energy
equations, work energy equations for a systems of particles. Problems (vector
method).
UNIT VI Variational Mechanics: Hamiton principle, Lagrange equations, principle of
virtual work.

Text Books:
1. Engineering Mechanics - Statics & Dynamics by I.H. Shames, PHI, New Delhi.
2. Engineering Mechanics – Timoschenko.
Reference Books:
1. Statics & Dynamics by J.L. Meriam, John Wiley & Sons (P) Ltd. New York.
2. Statics & Dynamics by Beer & Johnson, MGH, New Delhi.
3. Engineering Mechanics - Statics & Dynamics by D.S.Kumar, S.K.Kataria & Sons, New
Delhi.
 ME-207C THERMODYNAMICS
B. Tech (Mechanical Engineering) III Semester
No. of Credits: 4 Sessional : 25 Marks
L T P Total Theory : 75 Marks
3 1 0 4 Total : 100 Marks
Duration of Exam. : 3 Hours

Pre- Requisite: Basics of Mechanical Engineering

Successive: Heat and Mass Transfer, IC Engines, Refrigeration and Air Conditioning

Course Objectives:
The objective of studying this course is to understand and apply the concepts of
thermodynamic properties and their relationships, laws of thermodynamics and
thermodynamic behavior of pure substances to solve engineering problems.

Course Outcomes (COs): At the end of the course, the student shall be able to:

CO1- Understand the basic concepts of thermodynamics and apply zeroth and first law to
analyse thermodynamic processes.

CO2- Comprehend the second law of thermodynamics and apply it solve the problems
related to heat engines, refrigerators, heat pumps compressors and nozzles etc.

CO3- Learn and apply the concept of entropy, availability and irreversibility to
thermodynamic processes.

CO4- Evaluate properties of pure substances, gases and their mixtures and to derive and
apply property relations to thermodynamic problems.

Syllabus:
UNIT I Pure Substance: Pure Substance and its Properties, Phase and Phase
Transformation, Vaporization, Evaporation and Boiling, Saturated and Superheat
Steam, Solid – Liquid – Vapour Equilibrium, T-V, P-V, P-T and P-V-T Plots
During Steam Formation, Properties of Dry, Wet and Superheated Steam, Property
Changes During Steam Processes, Temperature – Entropy (T-S) and Enthalpy –
Entropy (H-S) Diagrams, Throttling and Measurement of Dryness Fraction of
Steam. Problems.

UNIT II Basic Concepts and First Law: Introduction, Quasi-static, Reversible and
Irreversible Processes, Concept of Thermodynamic Work and Heat, Equality of
Temperature, Zeroth Law of Thermodynamic and its utility. Energy and its Forms,
 Energy and 1st law of Thermodynamics, Internal Energy and Enthalpy, PMMFK,
Steady flow energy equation, Steady Flow Process and Transient Flow Process,
Throttling Process and Free Expansion Process. Problems.

UNIT III Second Law of Thermodynamics: Limitations of First Law, Thermal Reservoir,
Heat Source and Heat Sink, Heat Engine, Refrigerator and Heat Pump, Kelvin-
Planck and Clausius Statements and their Equivalence, PMMSK. Carnot Cycle,
Carnot Heat Engine and Carnot Heat Pump, Carnot Theorem and its Corollaries,
Thermodynamic Temperature Scale. Entropy, Clausius Inequality, Principle of
Entropy Increase, Temperature Entropy Plot, Entropy Change in Different
Processes, Introduction to Third Law of Thermodynamics. Problems.

UNIT IV Availability and Irreversibility: High and Low Grade Energy, Availability and
Unavailable Energy, Loss of Available Energy Due to Heat Transfer Through a
Finite Temperature Difference, Dead state of a system, Availability of a Non-Flow
or Closed System, Availability of a Steady Flow System, Helmholtz and Gibb’s
Functions, Effectiveness and Irreversibility, Concept of Exergy, Exergic Efficiency
and Exergy destruction. Problems.

UNIT V Ideal and Real Gases: Concept of an Ideal Gas, Basic Gas Laws, Characteristic
Gas Equation, Avogadro’s law and Universal Gas Constant, P-V-T surface of an
Ideal Gas. Vander Waal’s Equation of state, Reduced Co-ordinates,
Compressibility factor and law of corresponding states. Mixture of Gases, Mass,
Mole and Volume Fraction, Gibson Dalton’s law, Gas Constant and Specific
Heats, Entropy for a mixture of non-reactive gases. Problems.

UNIT VI Thermodynamic Relations: Maxwell Relations, Clapeyron Equation, Relations

for changes in Enthalpy and Internal Energy & Entropy, Specific Heat Capacity
Relations, Joule Thomson coefficient & inversion curve.

Text Books:
1. Engineering Thermodynamics – P K Nag, Tata McGraw Hill
2. Thermodynamics: An Engineering Approach - Cengel and Boles, McGraw Hill Company.
Reference Books:
1. Fundamentals of Engineering Thermodynamics – E. Radhakrishnan, PHI, New Delhi.
2. Engineering Thermodynamics – Jones and Dugan, PHI, New Delhi.
3. Theory and Problems of Thermodynamics – Y. V.C. Rao, Wiley Eastern Ltd., New Delhi.
4. Engineering Thermodynamics – C P Arora, Tata McGraw Hill
5. Engineering Thermodynamics: Principles and Practices by D.S.Kumar, S.K.Kataria nd
Sons, New Delhi.
Web Links:
NPTEL Video Lecture ,Web: http://nptel.ac.in
 ME-209C MANUFACTURING PROCESSES
B. Tech (Mechanical Engineering) III Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory : 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam. : 3Hours

Pre-Requisite: Basics of Mechanical Engineering

Successive: Manufacturing Technology and Metrology, Advanced Manufacturing Processes,
Welding Technology

Course Objectives:
The main objective of teaching this subject is to disseminate the knowledge of different types
of processes used in manufacturing industries.

Course Outcome (COs): At the end of the course, the student shall be able to:
CO 1- Demonstrate the knowledge about different sand moulding and metal casting
processes.
CO 2- Understand the plastic deformation of metals under rolling, extrusion, forging and
sheet metal working.
CO 3- Acquire knowledge about basic welding processes and their selection for fabrication
of different components.
CO 4 - Learn about different gear manufacturing and gear finishing operations.
CO 5- Acquire the basics of powder metallurgy.

Syllabus:

UNIT I Metal Casting Processes: Advantages and limitations, sand mold making
procedure. Patterns: Pattern materials, pattern allowances, types of pattern, color
coding. Molding materials: Molding sand composition, sand preparation, Sand
molding processes. Cores: Types of cores, core prints, chaplets, and chills.
Gating systems: Gates and risers. Melting practice: Cupola furnace, Defects in
castings and their remedies, Precision Investment Casting, Centrifugal Casting,
Continuous Casting.

UNIT II Metal Forming Processes: Nature of plastic deformation, hot working and cold
working .Principles of rolling, roll passes, roll pass sequences. Forging: Forging
operations, smith forging, drop forging, press forging, forging defects.
UNIT III Extrusion and Sheet Metal Operations: Extrusion principle, hot
extrusion, cold extrusion, wire drawing, swaging, tube making. Sheet metal
operations: Press tools operations, shearing action, drawing dies, spinning,
bending, stretch forming, embossing and coining.

UNIT IV Welding Process: Principles of welding, brazing and soldering, Classification of

Welding Processes, gas welding and cutting process, equipment. Arc welding
power source and consumables. Resistance welding: Principle and equipments,
resistance spot welding, resistance seam welding, electro slag welding, forge
welding.

UNIT V Advance Welding Processes: Tungsten inert gas welding (TIG), metal
inert gas welding (MIG), MMAW, electron beam welding, friction welding, and
diffusion welding: their working principle, equipments, parameters and
applications.

UNIT VI Powder Metallurgy: Powder manufacturing, compaction and sintering processes.

Advantages and applications of Powder Metallurgy.

Text Books:
1. Principles of Manufacturing Materials & Processes – Campbell J. S., Publisher – Mc
Graw Hill.
2. Manufacturing Science - Ghosh A; Mallik A.K. Affiliated East-West Press Pvt. Ltd.,
New Delhi
3. Manufacturing Processes- H S Shan, Cambridge University Press 2nd Edition 2017.
4. Production Technology – P C Sharma –S.Chand publications, New Delhi.
Reference Books:
1. Foundry Technology - K.P. Sinha, D.B. Goel, Roorkee Publishing House.
2. Welding and Welding Technology - Richard L. Little Tata McGraw Hill Ltd.
3. Manufacturing Processes and Systems: Ostwald Phillip F., Munoz Jairo, John Wiley &
Sons
4. Manufacturing Technology-Foundry, Forming and Welding - P.N. Rao, Tata McGraw
Hill, New Delhi.
5. Elements of Manufacturing Processes – B.S. Nagendra Parasher, RK Mittal, PHI N.
Delhi
6. NPTEL Video Lecture ,Web: http://nptel.ac.in
 ME-211C NUMERICAL METHODS
B. Tech (Mechanical Engineering) III Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory: 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: Mathematics
Successive: Operations Research

Course Objectives:
To study essential concepts of different numerical methods. To study concept and interfacing
of Errors and accuracy. To study numerical solution of ordinary differential equations and
partial differential equations.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1 – Analyses of Numerical solution of partial differential equations.
CO 2 – Solution to the linear simultaneous equations.
CO 3 – Expedite Numerical solution of ordinary differential equations.
CO 4 – Conceptualizations of optimization.

Syllabus:

UNIT I Numerical solution of algebraic and transcendential equations: Bisection

method, newton’s method of false position, secant method, newton raphson
method, iteration method.

UNIT II Solution of linear simultaneous equations: Gauss elimination method, gauss

jordon method, jacobi’s iteration method, gauss siedal iteration method.

UNIT III Finite differences: Difference operators and relations between them, newton’s
forward and backward interpolation formulae, central difference interpolation
formulae by stirling and bessel, lagranges and newton divided, difference
formulae for unequal intervals, curve fitting, least square method.

UNIT IV Numerical differentiation and integration: Differentiation formulae derived

from interpolation formulae, newton cote’s quadrature formulae, trapezoidal rule,
simpson’s 1/3 and 3/8 rules, booles rules, weddles rule, gaussian quadrature
formulae.
UNIT V Numerical solution of ordinary differential equations: Taylor series method,
picard’s method, euler‘s method, modified euler’s method, runge’s method, runge
kutta’s method, predictor –corrector methods by milne and adam bash forth.

UNIT VI Numerical solutions of partial differential equation’s: Finite difference

approximation of partial derivatives, solution of laplace equations by standard 5
point formula, solution of one dimensional heat flow equations by crank nicolson
method.

Text Books:
1. Numerical method in Engg. and science by B S Grewal (Khanna publishers)
2. Numerical method by Jain, Iyeger (Wiley Eastern Ltd)
Reference Books:
1. Numerical method for mathematics, science & engg by John Mathews (Prentice Hall of
India, New Delhi) .
2. Introduction & methods of numerical analysis by S D Sastry (Prentice Hall of India, New
Delhi)
 ME-251C MECHANICS OF SOLIDS LAB
B. Tech (Mechanical Engineering) III Semester
No. of Credits: 1 Sessional: 15 Marks
L T P Total Practical: 35 Marks
002 2 Total : 50 Marks
Duration of Exam: 02 Hours

Pre- Requisite: Mechanics of Solids

Successive: Machine Design

Course Objectives:
The objective of the Mechanics of Solid lab is to demonstrate the basic principles in the area
of strength and mechanics of materials and structural analysis to the undergraduate students
through a series of experiments. In this lab the experiments are performed to measure the
properties of the materials such as impact strength, tensile strength, compressive strength,
hardness, ductility etc.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Learn the principles of mechanics of solid and engineering.
CO 2- Preparation of formal laboratory reports describing the results of experiments.
CO 3- Acquire to operate basic instruments in mechanics of materials lab.
CO 4- Able to understand the concepts of stress, strain of materials and ability to interpret the
data from the experiments.
List of Experiments:
1. To perform the Brinell hardness test.
2. To perform the Rockwell hardness test.
3. To perform the Vickers hardness test on Universal Hardness Tester.
4. To study the Erricson sheet metal testing machine & perform the Erricson sheet metal
test.
5. To perform the Impact tests (Izod&Charpy) on Impact Testing Machine.
6. To perform the tensile test on Universal Testing Machine.
7. To perform compression & bending tests on UTM.
8. To perform the shear test on UTM.
9. To perform the torsion test on a Torsion Testing Machine.
10. To draw shear Force, Bending Moment Diagrams for a simply Supported Beam
under Point and Distributed Loads.
 ME-253C FLUID MECHANICS LAB
B. Tech (Mechanical Engineering) III Semester

No. of Credits: 1 Sessional: 15 Marks

L T P Total Practical: 35 Marks
002 2 Total : 50 Marks
Duration of Exam: 02 Hours

Pre- Requisite: Fluid Mechanics

Successive : Fluid Machines

Course Objectives:
To learn the various concepts of stability, continuity and Bernoulli’s equation; various losses
through pipes; to learn the determination of hydraulic coefficients and velocity profile.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Understand the techniques and concept of stability.
CO 2- Learning continuity and Bernoulli’s equation.
CO 3- Analyse discharge measuring devices and hydraulic coefficients.
CO 4- Knowledge of different types of pipe losses and determine the velocity profile in a
pipe.

List of Experiments:
1. To determine the meta-centric height of a floating ship model.
2. To verify the Bernoulli’s Theorem.
3. To determine coefficient of discharge of a Venturimeter.
4. To determine the coefficient of discharge of an Orificemeter.
5. To calibrate a Rotameter.
6. To determine the coefficient of discharge of a Notch (V and Rectangular types).
7. To determine the friction factor for the pipes.
8. To determine the coefficient of contraction, velocity and discharge of an orifice.
9. To determine the minor losses due to sudden enlargement, sudden contraction and
bends.
10. To determine velocity profile using Pitot tube.
 ME-255C MACHINE DRAWING USING AUTOCAD
B.Tech (Mechanical Engineering) III Semester

No. of Credits: 2 Sessional: 30 Marks

L T P Total Practical : 70 Marks
0044 Total : 100 Marks

Pre- Requisite: Engineering Drawing

Successive : Computer Aided Design

Course Objective:
To understand the procedure of creating drawings of mechanical components using
AutoCAD.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Learning the fundamentals of computer aided drafting using AutoCAD.
CO 2- Understanding of the drawing standards and gear terminology.
CO 3- Generation of the orthographic views of various mechanical parts using AutoCAD.
CO 4- Expedite the Isometric views and Assembly of various mechanical parts using
AutoCAD.

Syllabus:
UNIT I CAD: Introduction to AutoCAD, 2D Drafting using AutoCAD, Orthographic and
Isometric modelling using AutoCAD, Introduction to Assembly modelling and
sectioning using AutoCAD.

UNIT II Drawing standards: Introduction to Limits, fits and Tolerance (Dimensional and
Geometrical tolerance), Surface finish representation. Gear: Gear terminology, I.S.
convention representation of assembly of spur gears, helical gears, bevel gears,
worm and worm wheel.

UNIT III Orthographic views of machine parts / components: Dimensioning, Sectioning

using AutoCAD. Exercises on Lathe Tail stock, Machine vice, Steam stop valve,
Drill jigs and Spur Gear using AutoCAD.
UNIT IV Isometric views and Assembly drawings: Piston cylinder arrangement, 3D views
of cone, pyramid, wedge, cylinder, Connecting rod, Spur Gear and Engine parts in
AutoCAD.

Text Books:
1. Engineering Graphics with Auto CAD 2002 - JamesD.Bethune, Pearson Education.
2.Machine Drawing - N D Bhatt and V M Panchal, Charotar Publishing House.
Reference Books:
1. A Text Book of Machine Drawing: Laxmi Narayana and Mathur, M/s. Jain Brothers, New
Delhi.
2. Machine drawing: N Sidheshwar, Kannaieh, V S Sastry, TMH, New Delhi.
3. Engineering Drawing and Computer Graphics: Kohli and Gupta; Tech India Publication
series.
 ME-202C KINEMATICS OF MACHINES
B.Tech (Mechanical Engineering) IV Semester

No. of Credits: 3 Sessional: 25 Marks

L T P Total Theory: 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 hrs.
Pre- Requisite: Engineering Mechanics
Successive: Dynamics of Machines, Machine Design
Course Objectives:
To develop the concept of geometric aspects of motion and its profile in various machine
members.
Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Develop the concept of mechanism and machines.
CO 2- Uunderstand the concept of Motion Analysis in Mechanism.
CO 3- Ddevelopment the concept of Synthesis of Mechanisms.
CO 4- Knowledge of concept of Gears and its assembly.
CO 5- Learn the analysis and geometry of CAM profiles.
CO 6- Explore the concept of Brakes and its applications.

Syllabus:
UNIT I Mechanism and Machine: Links, Kinematic pairs, Degree of freedom, Kinematic
Chain, Binary, Ternary, Quaternary Links and Joints, Inversions of Mechanisms,
Application Lower Pairs : Pantograph, Straight Line Mechanisms, Approximate
Straight Line Motion Mechanism: Steering gears: Davis Steering gear,
Ackermann Steering gear, Universal Hook’s Joint

UNIT II Motion Analysis in Mechanism: Concept of Instantaneous centre method to

analyze Velocity in Simple Mechanism, Method for locating an instantaneous
centre. Relative Velocity method to analyze Velocity and acceleration, Rubbing
velocity at pin joints. Coriolis acceleration component.

UNIT III Synthesis of Mechanisms: Kinematics synthesis of Mechanisms, Type, number

and dimensional synthesis, function generation, path generation and body
guidance, Two and three position synthesis of four bar and slider crank
 mechanisms by graphical methods, Freudenstein’s equation, precision positions,
structural error; Chebychev spacing, transmission angle, problems.

UNIT IV Gears: Concept of gears and its type, Terminology, Law of gearing, velocity of
sliding, Forms of Teeth, Cycloid profile teeth, Length of path of contact, length of
arc of contact, Number of pairs of teeth in contact, Interference in involute gears,
Minimum number of teeth to avoid interferences on gear and wheel, Concept of
Helical gears, spiral gears, Gear Trains: Types of gear trains: simple gear train,
compound gear train, Reverted gear train, Epicyclic gear train.

UNIT V Cams: Types of followers, Nomenclature of followers, Motion of follower, Simple

harmonic motion of follower, Uniform acceleration and retardation, Cycloidal
motion, cam profile construction, cam profile for roller followers.

UNIT VI Brakes and Dynamometers: Types of brake: Simple shoe brake, Band Brake,
Band and Block brake, Internal expanding shoe brake, Dynamometer, Absorption
Dynamometer: Prony brake dynamometer, Transmission Dynamometer: Epi-
cyclic train dynamometer.

Text Books:
1. Theory of Machines and Mechanisms: Joseph Edward Shigley and John Joseph Uicker,
Jr. Second Edition, MGH, New York.
2. Theory and Machines: V.P. Singh, Dhanpat Rai & Company.
3. Theory and Machines: S.S. Rattan, Tata McGraw Hill.
References:
1. NPTL lectures
 ME-204C MATERIAL SCIENCE AND ENGINEERING
B. Tech (Mechanical Engineering) IV Semester
No. of Credits: 4 Sessional: 25 Marks
L T P Total Theory : 75 Marks
4004 Total : 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: Chemistry
Successive: Advanced Solids of Mechanics, Machine Design
Course Objective:
The objective of this course is to make the students aware of importance of materials, their
structure, properties, application and the science behind them. The students will also be
sensitized about the environmental and societal issues related to use of materials.

Course Outcomes (COs): After studying this course, students will be able:

CO 1- know about the basics of materials, crystallography and classify crystal defects.
CO 2- Comprehend the deformation phenomena, mechanisms of fracture and modes of
failure in materials.
CO 3- Classify solid solutions and interpret equilibrium phase diagrams of ferrous and non-
ferrous alloys.
CO 4- Select suitable heat-treatment process to achieve desired properties of metals and
alloys.
CO 5- Understand the application of advanced engineering materials and to analyse
Environmental and societal issues related to material science and Engineering.

Syllabus:
UNIT I The Structure of Crystalline Solids: Introduction, basic concepts, Unit Cells,
Metallic Crystal Structures, Density Computations, Polymorphism and Allotropy,
Crystal Systems, Point Coordinates, Crystallographic Directions,
Crystallographic Planes, Linear and Planar Densities, Single Crystals,
Polycrystalline Materials, Anisotropy, Imperfections in Solids, Point Defects,
Impurities in Solids, Solid solutions, Linear Defects, Interfacial Defects, Bulk or
Volume Defects.

UNIT II Deformation and Failure of Metals and Alloys: Introduction, Characteristics of

Dislocations, Slip Systems, Slip in Single Crystals, Plastic Deformation of
Polycrystalline Materials, Deformation by Twinning, Strain Hardening,
Recovery, Recrystallization, Grain Growth.
 Fundamentals of Fracture: Failure vs. Fracture, Ductile Fracture, Brittle
Fracture, Principles of Fracture Mechanics, Fatigue, Cyclic Stresses, The S–N
Curve, Crack Initiation and Propagation, Factors that affect Fatigue Life,
Environmental Effects, CREEP, Generalized Creep Behaviour, Stress and
Temperature Effects.

UNIT III Phase Diagrams: Introduction, Solubility Limit, Phases, Microstructure, Phase
Equilibria, One-Component (or Unary) Phase Diagrams, Binary Isomorphous
Systems, Interpretation of Phase Diagrams, The Gibbs Phase Rule, Tie Line Rule
and Lever Rule, Development of Microstructure in Isomorphous and Eutectic
Binary Alloys, Invariant Reactions, The Iron–Iron Carbide (Fe–Fe3C) Phase
Diagram, Development of Microstructure in Iron–Carbon Alloys,

UNIT IV Phase Transformations and Thermal Processing of Iron- Carbon Alloys:

Introduction, Isothermal Transformation Diagrams, Continuous Cooling
Transformation Diagrams, Introduction to Thermal Processing of Metals,
Annealing, Hardening and Tempering Processes for Steels.

UNIT V Advanced Engineering Materials: Ceramics and their application, Silicate

Ceramics, Carbon, Carbon Nanotubes, Particle-Reinforced Composites, Large-
Particle Composites, Dispersion-Strengthened Composites, Fiber-Reinforced
Composites, Influence of Fiber Length, Orientation and Concentration, The Fiber
Phase, The Matrix Phase, Polymer-Matrix Composites, Metal-Matrix
Composites, Ceramic-Matrix Composites, Carbon–Carbon Composites, Shape-
Memory Alloys, Bio-materials.

UNIT VI Economic, Environmental, and Societal Issues in Materials Science and

Engineering: Introduction, Component Design, Materials, Manufacturing
Techniques, Recycling Issues in Materials Science and Engineering,
Biodegradable and Bio-renewable Polymers/Plastics.

Text Books:
1. Material Science and Engineering-An Introduction: Callister, W.D., John Wiley & Sons,
Delhi.
2. Elements of Material Science and Engineering: Lawrence H. VanVlack, Pearson
Education India.
3. Introduction to Engineering Materials: B. K. Agarwal, Tata McGraw-Hill Education,
India
4. Material Science - Narula, Narula and Gupta. Tata McGraw-Hill Education, India
Reference Books:
1. The Essence of Materials for Engineers Robert W., Jr. Messler-Jones and Bartlett
Publishers, Inc., USA
2. Engineering Materials: Kenneth G. Budinski, Prentice Hall of India, New Delhi
3. Material Science & Engineering –V. Raghvan, Prentice Hall of India Pvt. Ltd, New
Delhi
 ME-206C INTERNAL COMBUSTION ENGINES
B. Tech (Mechanical Engineering) IV Semester
No. of Credits: 4 Sessional: 25 Marks
L T P Total Theory : 75 Marks
3104 Total : 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: Chemistry, Thermodynamics
Successive: Automobile Engineering, Power Plant Engineering, Applied Thermodynamics

Course Objectives:
To study the concept and details of internal combustion engines with gas turbines. Study of
carburetion, injection, ignition system with new technologies, lubrication, cooling system and
Fuel cells.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Understand the Air Standard Cycles with their applications.
CO 2- Analyze carburetion, injection and ignition systems with new technologies.
CO 3- Conceptualize Combustion System of IC Engines.
CO 4- Knowledge of Lubrication and Cooling systems and fuel cells.
CO 5- Analyses the gas turbines.

Syllabus:

UNIT I Air Standard Cycles: Internal and external combustion engines; classification of
I.C. Engines, Cycles of operation in four stroke and two stroke I.C. Engines,
Wankel Engines, Assumptions made in air standard cycle; Otto cycle; diesel cycle,
dual combustion cycle, comparison of Otto, diesel and dual combustion cycles;
sterling and Ericsson cycles; air standard efficiency, specific work output, specific
weight; work ratio; mean effective pressure; deviation of actual engine cycle from
ideal cycle. Performance parameters: BHP, IHP, mechanical efficiency, brake
mean effective pressure and indicative mean effective pressure, torque, volumetric
efficiency; specific fuel consumption (BSFC, ISFC), thermal efficiency; heat
balance; performance curves. Problems.

UNIT II Carburetion, Fuel Injection and Ignition systems: Mixture requirements for
various operating conditions in S.I. Engines; elementary carburettor, Requirements
of a diesel injection system; types of injection systems; petrol injection, Electronic
 Fuel Systems, Injector Sequencing & Management, Requirements of ignition
system; types of ignition systems ignition timing; spark plugs. Problems.

UNIT III Combustion in I.C. Engines: S.I. engines; Ignition limits; stages of combustion
in S.I. Engines; Ignition lag; velocity of flame propagation; detonation; effects of
engine variables on detonation; theories of detonation; octane rating of fuels; pre-
ignition; S.I. engine combustion chambers, Stages of combustion in C.I. Engines;
delay period; variables affecting delay period; knock in C.I. engines, Cetane rating;
C.I. engine combustion chambers.

UNIT IV Lubrication and Cooling Systems: Functions of a lubricating system, Types of

lubrication system; mist, wet sump and dry sump systems; properties of lubricating
oil; SAE rating of lubricants, engine performance and lubrication, Necessity of
engine cooling; disadvantages of overcooling; cooling systems; air-cooling, water
cooling; radiators.

UNIT V Fuel Cell: Different fuel cell technologies – catalysts used, Fuel cell efficiencies,
comparison with Carnot efficiencies, Thermodynamic advantage of
electrochemical energy conversion, Mass transport in electrochemical cells, Ideal
current – voltage relationship in fuel cells, Fuel cell stacks, Cogeneration,
Limitations of existing technology, Approaches to improve existing technology.

UNIT VI Gas Turbines: Brayton cycle; Components of a gas turbine plant; open and closed
types of gas turbine plants; Optimum pressure ratio; Improvements of the basic gas
turbine cycle; multi stage compression with inter-cooling; multi stage expansion
with reheating between stages; exhaust gas heat exchanger, Applications of gas
turbines. Problems.

Text Books:
1. Internal Combustion Engines –V. Ganesan, Pub.-Tata McGraw-Hill.
2. Gas Turbines - V. Ganesan, Pub. - Tata McGraw Hill.
3. Engineering fundamental of the I.C.Engine – Willard W. Pulkrabek Pub.-PHI, India
Reference Books:
1. Internal Combustion Engines & Air pollution- Obert E.F, Pub.-Hopper & Row Pub., New
York
2. Internal Combustion Engines Fundamentals- John B. Heywood, Pub.-McGraw Hill, New
York.
 ME-208C FLUID MACHINES
B.Tech (Mechanical Engineering) IV Semester
No. of Credits: 3 Sessional : 25 Marks
L T P Total Theory : 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam : 03 Hours
Pre- Requisite: Fluid Mechanics
Successive: Power Plant Engineering, Applied Thermodynamics

Course Objectives:
To learn the basic principle, design and analysis of fluid machines.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Application of momentum equation and its application.
CO 2- Understand the construction, working principle and design analysis of hydraulic
turbines.
CO 3- Expedite construction, working principle and design analysis of pumps.
CO 4- Knowledge of the design of a prototype on the basis of dimensional analysis.

Syllabus:

UNIT I Impact of Free Jets: Impulse – momentum principle; Forces on a stationary,

inclined and curved plate; Forces on moving single inclined & curved plate; Forces
on series of vanes; jet propulsion of ships. Problems.

UNIT II Impulse Turbines: Classification of turbines; component parts; construction and

operation of a Pelton wheel; effective head; available head; design aspects; speed
ratio; flow ratio; jet ratio; number of jets; number of buckets and working
proportions; Energy conversion; Performance Characteristics; governing of
impulse turbines. Problems.

UNIT III Reaction Turbines: Advantages, disadvantages, use and limitations of different
turbines, Component parts; construction and operation of a Francis, Propeller and
Kaplan turbine; governing mechanism; draft tube - its function and different forms;
velocity triangles; slow; medium and fast runners; work done by the turbine
runner; working proportions and design parameters; Performance Characteristics;
Problems.
UNIT IV Centrifugal Pumps: Introduction; Working and components; Classification;
velocity diagrams and work done; vane shape; Losses and efficiencies;
minimum starting speed; cavitation and maximum suction lift; net positive
suction head; design considerations; multistage pumps. specific speed;
performance characteristics; Brief introduction to axial flow, mixed flow and
submersible pumps; Problems.

UNIT V Reciprocating Pumps: Introduction; Working and components; Classification;

slip; work and power input; Indicator diagram; Effect of piston acceleration and
pipe friction on indicator diagram; Maximum speed; Multi cylinder pumps; air
vessels and their utility; rate of flow into or from the air vessel; characteristic
curves; Brief introduction to screw pump, gear pump, vane pump, radial piston
pump and hydraulic ram; Problems.

UNIT VI Dimensional Analysis and Model Similitude: Dimensions; Dimensional

homogeneity; Rayleigh’s method and Buckingham’s π-method; Dynamic
forces; dimensionless numbers and their significance; Model testing and
similitude; Similitude laws; Model testing of turbines and pumps.

Text Books:
1. Hydraulic Turbines- Daughaty R L- McGraw Hill Book Company
2. Hydraulics & Fluid Mechanics including hydraulic machines – PN Modi & SM Seth;
Pub. - Standard Book House; New Delhi
3. Hydraulic Machines – Jagdish Lal; Metropolitan
Reference Books:
1. Fluid Mechanics and Fluid Power Engineering – D S Kumar; S K Kataria and Sons.
2. Hydraulic Turbines- Robert Long Daugherty; Read Books.
3. Centrifugal and Axial Flow Pumps- Stepanoff A J- John Wiley and Sons.
4. Advanced Fluid Mechanics and Fluid Machinery- Binder R C- Prentice Hall.
5. Fluid Mechanics and Thermodynamics of Turbomachinery- S.L. Dixon- Elsevier.
 ME-210C MANUFACTURING TECHNOLOGY AND METROLOGY
B. Tech (Mechanical Engineering) IV Semester
No. of Credits: 3 Sessional : 25 Marks
L T P Total Theory : 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam. : 3 Hours

Pre- Requisite: Manufacturing Process

Successive: Welding Technology, Production Planning and Control

Course Objectives:
The main objectives of this course are to provide basic knowledge about chip formation,
materials of cutting tools, components of jigs, fixtures, knowledge about welding and non-
conventional processes and measuring instruments used in quality control of components.

Course Objectives (COs): At the end of the course, the student shall be able to:
CO 1- Acquire knowledge about mechanics of chip formation and to identify the factors
related to tool wear and machinability.
CO 2- Learn about different gear manufacturing and gear finishing operations.
CO 3- Select the proper cutting tool material and components of jigs and fixtures.
CO 4- Understand the basics principles of non-conventional machining processes and their
applications.
CO 5- Identify and select different measuring instruments for the inspection of different
components.

Syllabus:

UNIT I Mechanism of Metal Cutting: Deformation of metal during machining,

nomenclature of lathe, milling tools, mechanics of chip formation, built-up edges,
mechanics of orthogonal and oblique cutting, Merchant cutting force circle and
shear angle relationship in orthogonal cutting, factors affecting tool forces. Cutting
speed, feed and depth of cut, surface finish. Temperature distribution at tool chip
interface. Numericals on cutting forces and Merchant circle.

UNIT II Tool Wear and Machinability: Types of tool wear, tool life, factors governing
tool life, Machinability: Definition and evaluation. Economics of machining,
Numerical on tool life.
UNIT III Gear Manufacturing: Introduction, methods of manufacture. Gear generation and
forming: Gear cutting by milling, single point form tool, gear hobbing and shaping.
Gear finishing operations: Gear shaving, gear burnishing, gear grinding, lapping.

UNIT IV Cutting Tool Materials & Cutting Fluids: Characteristics of tool materials,
various types of cutting tool materials, coated tools, cutting tool selection, Purpose
and types of cutting fluids, basic actions of cutting fluids, effect of cutting fluid on
tool life, selections of cutting fluid
Jigs & Fixtures: Introduction, location and location devices, clamping and clamping
devices, Drill Jigs, Milling Fixtures.

UNIT V Unconventional Machining Processes: introduction, classification of

unconventional machining processes, Abrasive jet machining: Principles,
advantages, disadvantages and applications. Ultrasonic machining: Principles,
advantages, disadvantages and applications. Electro-chemical machining and
grinding: Principles of operation, advantages, disadvantages and applications.
Electric discharge machining: Principles, advantages, disadvantages and
applications. Electron beam machining: principle, advantages, disadvantages and
applications. Laser beam machining: Principles and applications.

UNIT VI Metrology : Standards of linear measurement, line and end standards. Limit
gauges. Measurement of geometric forms like straightness, flatness, roundness and
circularity. Optical projectors, autocollimators. Interferometry: principle and uses of
interferometers, optical flat and interferometers. Comparators: types, working
principles and magnification range. Measurement of screw threads and gears. Surface
texture: quantitative evaluation of surface roughness and its measurement.
Introduction to CMM.

Text Books:
1. Manufacturing Technology – Metal cutting and machine Tools: P.N. Rao, T.M.H,
New Delhi
2. Workshop Technology -Vol II (Machine Tools) B.S Raghuwanshi, dhanpat Rai and
Company.

3. Manufacturing Processes- H S Shan, Cambridge University Press 2nd Edition

2017.
Reference Books:
1. Manufacturing Engg. & Tech, Kalpakian, Serope Addison -Wisly Publishing Co.
New York.
2. Modern Machining Processes: P.C. Pandey & H.S. Shan, T.M.H. Company, New
Delhi
3. Text Book of Production Engineering: P.C. Sharma, S.Chand & Sons.
Web Links:
NPTEL Video Lecture ,Web: http://nptel.ac.in
 ME-212C ADVANCE STRENGTH OF MATERIALS
B. Tech (Mechanical Engineering) IV Semester
No. of Credits: 4 Sessional: 25Marks
L T P Total Theory: 75 Marks
3103 Total : 100Marks
Duration of Exam: 3Hours
Pre- Requisite: Mechanics of Solids
Successive: Design and Optimization

Course Objectives:
To understand concept of stress and strain induced in material under various loading
conditions. To understand the concept of stresses induced in curves and rotating rings and
discs.

Course Outcomes (COs): After studying this course, students will be able:
CO 1- Apply and use energy methods to find force, stress and displacement in simple
structures and springs.
CO 2- Understand and determine the stresses and strains in pressure vessels.
CO 3- Knowledge of stress functions, and calculate stresses in rotating rings, discs, and
curved beams.
CO 4- Evaluate the behaviour and strength of structural elements subjected to three
dimensional stress system.

Syllabus:

UNIT I Energy Methods: Definitions, expressions for strain energy stored in a body when
load is applied (i) gradually, (ii) suddenly and (iii) with impact, strain energy of
beams in bending, beam deflections, strain energy of shafts in twisting, energy
methods in determining spring deflection, Castigliano’s & Maxwell’s theorems.
Numericals.

UNIT II Springs: Stresses and Deflection of springs by energy method, helical springs
under axial load and under axial twist axial load and twisting moment acting
simultaneously both for open and closed coiled springs, laminated springs, leaf
springs.

UNIT III Thin and Thick Pressure Vessels: Hoop & Longitudinal stresses & strains in
cylindrical & spherical vessels & their derivations under internal pressure,
 Derivation of Lame’s equations, radial & hoop stresses and strains in thick and
compound cylinders shells subjected to internal fluid pressure. Numericals.

UNIT IV Rotating Rings & Discs: Stresses in uniform rotating rings & discs, rotating discs
of uniform strength, stresses in rotating cylinders, hollow cylinders & solids
cylinders. Numericals.

UNIT V Bending of Curved Bars: Bending of beams with large initial curvature, position
of neutral axis for rectangular, trapezoidal and circular cross sections, stress in
crane hooks, stress in circular rings subjected to tension or compression.

UNIT VI Three Dimensional Stress and Strains: Introduction, Equilibrium equations,

Three dimensional stress and strain -principle stresses, Stress and strain invariants,
Airy’s Stress function, Generalised Hook’s law, Strian Rosset Analysis, Strian
analysis of composites and Polymers. Numericals.

Text Books:
1. Strength of Materials – G.H.Ryder, Third Edition in SI Units 1969 Macmillan, India.
2. Mechanics of Materials – (Metric Edition): Ferdinand P. Beer and E. Russel Johnston,
Jr.Second Edition, McGraw Hill.
3. Strength of Material- Sadhu Singh- Khanna Publisher.
Reference Books:
1. Book of Solid Mechanics – Kazmi, Tata McGraw Hill
2. Strength of Materials – D.S. Bedi - S. Chand & Co. Ltd.
3. Advanced Mechanics of Solids and Structures – N. Krishan Raju and D.R.Gururaje-
Narosa Publishing House.
Web Links:
1. http://nptel.ac.in/courses/112101095/
2. https://www.youtube.com/watch?v=jZRomCtVLHU
3. https://www.youtube.com/watch?v=1Ycn81U72G0
 ME-252C KINEMATICS OF MACHINES LAB
B. Tech (Mechanical Engineering) IV Semester

No. of Credits: 1 Sessional : 15Marks

L T P Total Practical : 35 Marks
0 0 2 2 Total : 50 Marks
Duration of Exam. : 2 Hours
Pre- Requisite: Kinematics of Machines
Successive: Dynamics of Machines
Course Objectives:
To demonstrate the basic elements of machine members and its arrangement to make a
mechanism.
Course Outcomes (COs): After studying this course, students will be able:
CO 1- Understand the various practical demonstrations of mechanism.
CO 2- Knowledge of Motions in mechanism with practical demonstration.
CO 3- Learning the Special purpose machine members used in designing of a machine.
CO 4- Synthesis of working model using the various linkages.

List of Experiments:
1. To study various types of kinematic links, pairs, chains and mechanisms.
2. To study inversions of four bar mechanism, Single and double slider crank
mechanisms.
3. To plot slider displacement, velocity and acceleration against crank rotation for single
slider crank mechanism.
4. To find coefficient of friction between belt and pulley.
5. To generate spur gear involute tooth profile using simulated gear shaping process.
6. To study various types of gears- Helical, cross helical worm and bevel gear.
7. To study various types of gear trains – simple, compound, reverted, Epicyclic and
differential.
8. To study types of CAM & followers, to draw the Cam Profile.
9. To study the working of Screw Jack and determine its efficiency.
10. To Fabricate the working Models.
 ME-254C MATERIAL SCIENCE AND ENGINEERING LAB
B. Tech (Mechanical Engineering) IV Semester
No. of Credits: 1 Sessional: 15 Marks
L T P Total Theory : 35 Marks
Total : 50 Marks
0022
Duration of Exam: 2 Hours

Pre- Requisite: Material Science

Successive: Metallurgy

Course Objectives:
The overall objective of the course is to provide the students with hands-on experience in (i)
basic experimental techniques, (ii) data analysis. Small groups of about 5 to 6 students work
as teams in each laboratory session with the reports prepared independently.

Course Outcomes (COs): After studying this course, students will be:
CO 1- Learn the principles of materials science and engineering though lab investigation.
CO 2- Prepare formal laboratory reports describing the results of experiments.
CO 3- Operate basic instruments in materials science and engineering.
CO 4- Understand the basics structure of materials and ability to interpret the data from the
experiments.

List of Experiments:
1. To study crystal structures with the help of models.
2. To study crystal imperfections with the help of models.
3. To prepare a small specimen and mount it using hot mounting press.
4. To study optical metallurgical microscope.
5. To analyze microstructures of given Mild Steel/Aluminum specimen.
6. To analyze microstructure of given Grey cast iron specimen.
7. To harden and temper a given steel specimen.
8. To anneal a given hardened steel specimen.
9. To analyze microstructure of quench hardened steel specimen.
10. To analyze the properties of various types of plastics.

ME-256C INTERNAL COMBUSTION ENGINES LAB

 B. Tech (Mechanical Engineering) IV Semester
No. of Credits: 1 Sessional: 15 Marks
L T P Total Theory : 35 Marks
0022 Total : 50 Marks
Duration of Exam: 2 Hours
Pre- Requisite: I.C. Engines
Successive: Power Plant Engineering, Aircraft Engine Operation & Maintenance

Course Objectives:
Study and analyze the concept of I.C engines, I.C. engine testing and variable compression
test rig. Study of carburetion and lubrication, cooling system and pollution control system.

Course Outcomes (COs): After studying this course, students will be able:
CO 1- Understand the how to prepare the graph between bhp, ihp, fhp vs speed by using
variable compression test rig.
CO 2- Knowledge of functions of 4 stroke and two stroke engines.
CO 3- Learn Combustion System of IC Engines with Lubrication and Cooling system.
CO 4- Familiarization of the pollution control system.

List of Experiments: (Students have to perform at least 8 experiments from the given list)

1. To study 2 stroke Diesel and Petrol Engine.

2. To study 4 stroke Diesel and Petrol Engine.
3. To prepare heat balance sheet on multi-cylinder diesel engine/petrol engine.
4. To prepare variable speed performance test of a multi-cylinder/single cylinder petrol
engine/diesel engine and prepare the curves (i) bhp, ihp, fhp vs speed (ii) volumetric
efficiency & indicated specific fuel consumption vs speed.
5. To prepare the graph between curves (i) bhp, ihp, fhp vs speed by using variable
compression test rig.
6. To measure pollution emission e.g. CO & Hydrocarbons in the exhaust of 2- stroke / 4-
stroke petrol engine by using gas analyzer.
7. Perform disassembly and assembly of Engine head.
8. Study of Valve Timing Diagram.
9. Study on engine cooling system.
10. Study of P-θ diagram.
11. To determine Brayton cycle efficiency experimentally.
12. To determine efficiency of intercooled air compressor.
 ME-258C FLUID MACHINES LAB
B. Tech (Mechanical Engineering) IV Semester
No. of Credits: 1 Sessional: 15 Marks
L T P Total Practical: 35 Marks
002 2 Total: 50 Marks
Duration of Exam: 2 Hours
Pre- Requisite: Fluid Machines
Successive: Power Plant Engineering

Course Objectives:
To learn the construction, working and principle of fluid machines; draw and analyse
performance characteristics of fluid machines.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Understand the concept of momentum equation.
CO 2- Knowledge of construction, working principle and performance of hydraulic turbines.
CO 3- Learn construction, working principle and performance of pumps.
CO4- Explore construction, working principle and performance of hydraulic ram.

List of Experiments:
1. To determine the impact of jet on the different types of plates.
2. To study the constructional details of a Pelton turbine and draw its fluid flow circuit.
3. To draw the constant head; constant-speed and constant efficiency curves of Pelton
turbine.
4. To study the constructional details of a Francis turbine and draw its fluid flow circuit.
5. To draw the constant head; constant speed and constant efficiency curves of Francis
turbine.
6. To study the construction details of a Kaplan turbine and draw its fluid flow circuit.
7. To draw the constant head; constant speed and constant efficiency curves of Kaplan
turbine.
8. To study the constructional details and draw the characteristic curves of Centrifugal
pump.
9. To study the constructional details and draw the characteristic curves of Reciprocating
pump.
10. To analyze the construction details of a Gear oil pump and its performance curves.
11. To analyze the constructional details of a Hydraulic Ram and determine its various
efficiencies.
 ME-301C DYNAMICS OF MACHINES
B.Tech (Mechanical Engineering) V Semester
No. of Credits: 4 Sessional: 25 Marks
L T P Total Theory: 75 Marks
3 1 0 4 Total : 100 Marks
Duration of Exam: 3 Hours

Pre- Requisite: Kinematics of Machines, Engineering Mechanics

Successive: Tribology

Course Objectives:
To have a comprehensive knowledge of the forces and its effects causing the motion in a
Mechanism.
Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Understand the Static and Inertia Force Analysis.
CO 2- Explore the concept of Balalncing of rotating and reciprocating masses.
CO 3- Knowledge of concept of Mechanical Governor.
CO 4- Develop the concept of Gyroscope and its application.
CO 5- explore the concept of Mechanical Vibrartion.
CO 6- Carry out the Vibration Analysis.

Syllabus:
UNIT I Static and Inertia Force Analysis: Static force analysis of planer mechanisms,
dynamic force analysis including inertia and frictional forces of planer mechanisms.
D-Alembert’s Principle, Forces on the reciprocating parts of an engine considering
friction and inertia of moving parts, dynamically equivalent system, Torque exerted
on the crank shaft, considering the weight of the connecting rod.

UNIT II Balancing: Balancing rotating mass in single and several planes, Balancing of
reciprocating engine, concept of Partial balancing, Primary and secondary balancing
of multi-cylinder inline engine and radial engine, Method of direct and reverse
cranks.

UNIT III Governors: Types of Governor, Watt Governor, Porter governor, Proell Governor,
Hartnell Governor, Wilson-Hartnell governor, Sensitivity, Stability, Isochronisms,
Hunting, Governor Effort and Power, controlling force.
UNIT IV Gyroscopic effect: Spinning and precession, gyroscopic couple, Effect of
Gyroscopic couple on the stability of automotive vehicles: Stability of four
wheelers.

UNIT V Mechanical Vibration: Definition, parts of vibration, types: longitudinal,

transverse, torsional, transient, Free and Forced Vibration of single DOF ,Vibration
Absorber : tuned and damped absorber (qualitative treatment only), un-tuned
viscous damper.

UNIT VI Vibration Analysis: Introduction, Influence coefficient, Stiffness Matrix,

Flexibility Matrix, Natural Frequencies and Normal Modes, calculation of natural
frequencies by Rayleigh method, Vibration Isolation.

Text Books:
1. Theory of Machines and Mechanisms: Joseph Edward Shigley and John Joseph Uicker,
Jr. Second Edition, MGH, New York.
2. Theory and Machines: V.P. Singh, Dhanpat Rai & Company.
3. Theory and Machines: S.S. Rattan, Tata McGraw Hill.
References:
1. NPTL lectures
2. Mechanism and Machines: J S Rao,
3. Mechanical Vibrations : G.K.Grover – Nem Chand & Bros., Roorkee, INDIA
 ME-303C REFRIGERATION & AIR CONDITIONING
B. Tech (Mechanical Engineering) V Semester
No. of Credits: 4 Sessional: 25 Marks
L T P Total Theory: 75 Marks
3 1 0 4 Total: 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: Thermodynamics
Successive: Air Conditioning Equipments, Estimation and Design of RAC Plants

Course Objectives:
Make students familiar with the different refrigeration systems, air-conditioning systems,
eco-friendly refrigerants used.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Understand the air refrigeration, vapour compression refrigeration, vapour
absorption, steam jet refrigeration systems and different type of refrigerants.
CO 2- Expedite the working of single stage, multistage and cascade refrigeration.
CO 3- Knowledge of psychrometry and different psychrometric processes. Understand
and evaluate cooling and heating load and design of HVAC system.
CO 4- Develop and design RAC systems and evaluate different expansion and
control devices.

Syllabus:
UNIT I Introduction: Definition , Methods of refrigeration, Industrial Refrigeration; Unit
of refrigeration; Coefficient of performance (COP) Refrigerants- Definition,
Classification, Nomenclature, Desirable properties, Comparative study, secondary
refrigerants, Introduction to eco-friendly new Refrigerants and their analysis.
Air Refrigeration Systems: Carnot refrigeration cycle. Limitations of Reversed
Carnot cycle, Brayton refrigeration or the Bell Coleman air refrigeration cycle;
Air-craft refrigeration systems, Simple cooling and Simple evaporative types,
Boot strap and Boot strap evaporative types, Regenerative type and Reduced
Ambient type system, comparison of different air refrigeration systems,
advantages and disadvantages of air refrigeration cycle, Actual air conditioning
system with controls, problems.

UNIT II Simple Vapour Compression (VC) Refrigeration Systems: Analysis of VC cycle

considering degrees of sub cooling and superheating; VC cycle on P-V, T-S and
 PH diagrams; Effects of operating conditions on COP; Comparison of VC cycle
with Air Refrigeration cycle.
Multistage Vapour Compression (VC) Refrigeration Systems: Necessity of
compound compression, Compound VC cycle , Inter-cooling with liquid sub –
cooling and / or water inter cooler: Multistage compression with flash inter-
cooling and / or water inter-cooling; systems with individual or multiple
expansion valves; Individual compression system with individual or multiple
expansion valves; Individual compression systems with individual or multiple
expansion valves but with and without intercoolers, Production of low
temperatures: Introduction to Cryogenics, Limitations of Vapour compression
system for production of low temperature, Multistage refrigeration system, Two
and three stage cascade systems. Problems.

UNIT III Other Refrigeration Systems: Simple Absorption Systems , Practical Ammonia
Absorption System, COP of the Absorption System, Lithium bromide-Water
Absorption Refrigeration Systems and Electrolux Refrigeration system, Solar
energy based absorption refrigeration systems , Steam Jet Refrigerating System-
Introduction, Analysis, Relative merits and demerits, Performance Applications.

UNIT IV Psychrometry & Air Conditioning Processes: Properties of moist Air, Gibbs
Dalton law, Specific humidity, Dew point temperature, Degree of saturation,
Relative humidity, Enthalpy, Humid specific heat, Wet bulb temp.,
Thermodynamics wet bulb temp., Psychrometric chart; Psychrometry of air-
conditioning processes, Mixing Process, Basic processes in conditioning of air;
Psychrometric processes in air washer, Problems

UNIT V Heating and cooling load calculation for HVAC system design: Outside and
inside design conditions; Sources of heating load; Sources of cooling load; Heat
transfer through structure, Solar radiation, Electrical applications, Infiltration and
ventilation, Heat generation inside conditioned space; Comfort chart, Problems.

UNIT VI Equipment selection for HVAC system: Air distribution system; Basic of Duct
systems; Filters; Refrigerant piping; Design of summer air-conditioning and
Winter air conditioning systems; Temperature sensors, Pressure sensors,
Humidity sensors, Actuators, Safety controls; Accessories, Different types of
compressor used in refrigeration.
Text Books:
1. Refrigeration & Air conditioning –R.C. Jordan and G.B. Priester, Prentice Hall of India.
2. Refrigeration & Air conditioning –C.P. Arora, TMH, New Delhi.
Reference Books:
1. A course in Refrigeration & Air Conditioning – Arora & Domkundwar, Dhanpat Rai &
sons.
2. Refrigeration & Air conditioning –W.F. Stocker and J.W. Jones, TMH, New Delhi.
3. Refrigeration & Air conditioning- Manohar Prasad Wiley Estern limited, New Delhi.
4. Refrigeration and Air Conditioning by D.S.Kumar, S.K.Kataria & Sons, New Delhi.
 ME-305C INDUSTRIAL ENGINEERING
B. Tech (Mechanical Engineering) V Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory: 75 Marks
3003 Total : 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: Manufacturing Process
Successive: Advanced Manufacturing Processes

Course Objectives:
To study various concepts and practises of industrial engineering used in industries. Able to
design, develop, implement, and improve production systems that include people, materials,
information, equipment and environments aligned with success of companies.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Describe and apply various techniques of method study and work measurement.
CO 2- Discuss production system and factors affecting productivity and strategies for its
improvement.
CO 3- Learn various manufacturing cost components and perform cost analysis.
CO 4- Apply sales forecasting and materials management techniques.
CO 5- Identify objectives, variables and apply techniques and strategies for production
planning & control of a production system.
Syllabus:
UNIT I Production system and Productivity: Introduction to production systems, Aim of
production systems, generalized model of Production systems, Types and
characteristics of production systems, Life cycle approach to production
management, Product life cycle, Plant location, Plant layout, objectives, types,
comparison and application of different types of layouts. Productivity definition,
various methods of measurement, Factors effecting productivity, Strategies for
improving productivity.

UNIT II Manufacturing Cost Analysis: Fixed & variable costs, Direct, indirect &
overhead costs, & Job costing, Recovery of overheads, Standard costing, Cost
control, Cost variance Analysis - Labour, material, overhead in volume, rate &
efficiency, Break even Analysis, Numerical Problems.
UNIT III Work Study: Definition, Objectives, Method study, Principle of motion economy,
Techniques of method study – Various charts, THERBLIGS, Work measurement -
various methods, Time Study - PMTS, determining time, Work sampling. Numerical
Problems.

UNIT IV Materials Management : Strategic importance of materials in manufacturing

industries, Relevant costs, Inventory control models - Economic order quantity
(EOQ), Economic batch quantity (EBQ) with & without shortage, Inventory control
systems - P,Q,Ss Systems, determination of order point & safety stock, Selective
inventory control - ABC, FSN, SDE, VED,SCM , Numerical Problems.

UNIT V Forecasting: Importance, Objectives, Forecasting and Prediction, Types,

Classification of Forecasting Methods, Forecast Errors, Costs and Accuracy of
Forecasts, Numerical Problems.

UNIT VI Production Planning & Control (PPC) : Objectives & variables of PPC,
Aggregate planning - Basic Concept, its relations with other decision areas, Decision
options - Basic & mixed strategies, Master production schedule (MPS), Scheduling
Operations Various methods for line & intermittent production systems, Gantt chart,
Sequencing - Johnson algorithm for n-Jobs- 2 machines, n- Jobs-3 machines, 2 Jobs
n-machines, n-Jobs m-machines Various means of measuring effectiveness of PPC,
Numerical Problems.

Text Books:
1. Production & Operations Management – Chary, TMH, New Delhi.
2. Modern Production Management – S.S. Buffa, Pub.John Wiley.
Reference Books:
1. Operations Management - Schroeder, McGraw Hill ISE.
2. Operation Management - Monks, McGraw Hill ISE.
3. Production & Operations Management - Martinich, John Wiely SE.
4. Industrial & Systems Engineering - Turner, Mize, Case, Prentice Hall Pub.
5. Industrial Engineering & Operations Management – SK Sharma, Pub-S. K.Kataria
6. Industrial Engineering – Ravi Shankar, Galgotia Pub.
Web Links:
http://nptel.ac.in/courses/112107143/
http://nptel.ac.in/courses/112107142/
 ME-307C MACHINE DESIGN -I
B. Tech (Mechanical Engineering) V Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory: 75 Marks
3003 Total : 100 Marks
Duration of Exam: 3 Hours

Pre- Requisite: Kinematics of Machines, Mechanics of Solids

Successive: Machine Design II

Course Objectives:
To study the concept and details of material selection, allowable stresses and factor of safety.
To study the design of keys, coupling, cotter joints, various types of springs, various types of
clutches, thick cylinder and thin cylinders.
Course Outcomes: At the end of the course, the student shall be able to:
CO 1- Exploration of different concepts & considerations of machine design.
CO 2- Understanding design of different types of mechanical joints.
CO 3- Learning of design of different types of keys & couplings.
CO 4- Design procedure of transmission of shafts.
CO 5- Design of different types springs.
CO 6- Conceptualisation of design of different types of clutches.

Syllabus:

UNIT I Principles of Mechanical Design: General considerations & procedure of

design of machine elements, Engineering materials & their mechanical
properties, Selection of material, theories of failures, static loading, factor of
safety under different loading conditions, stress concentration, Concept of
fatigue failures for dynamic loading.

UNIT II Mechanical Joints: Design of riveted &welding jointsunder different static

load conditions. Design of screwed joints against static load, eccentrical
loading, Design of cotter joints and knuckle joint.

UNIT III Keys & Couplings: Design of different type of keys; sunk key, saddle key,
tangent key, round key & splines. Design of different shaft couplings against
torque; Rigid & Flexible couplings.
UNIT IV Transmission Shafts: Design of shaft subjected to static loading: pure
torsion, simple bending, combined bending and torsion, combined bending
torsion and axial loads. Design of shafts for fluctuating loads.

UNIT V Springs: Terminologies of springs, Different type of springs, Design of helical

springs for static & dynamic loading, Eccentric loading, Surge in springs,
Springs in series & parallel connection, Type of leaf springs, Design of leaf
springs.

UNIT VI Clutches: Various types of clutches, Design of friction clutches; Single plate
clutch, Multi-plate clutch, Cone clutch & Centrifugal clutch.
Text Books:
1. Mechanical Engineering Design: Joseph Edward Shigley-MGH, New York.
2. Design of Machine Elements – V.B. Bhandari – MGH.
3. Norton, R. L., Machine design: an integrated approach, Prentice Hall.
Web Links:
NPTEL Courses, http://www.nptel.ac.in
 ME-351C DYNAMICS OF MACHINES LAB
B. Tech (Mechanical Engineering) V Semester

No. of Credits: 1 Sessional: 15 Marks

L T P Total Practical: 35 Marks
0 0 2 2 Total: 50 Marks
Duration of Exam: 2 Hours

Pre- Requisite: Basics of Mechanical Engineering, Dynamics of Machines

Successive: Tribology
Course Objective:
To demonstrate the effects of various forces in balancing, governing and directing in a
mechanism.
Course Outcomes: At the end of the course, the student shall be able to:
CO 1- Understand the various practical demonstrations of forces in mechanism.
CO 2- Knowledge of various Design features of mechanism with practical demonstration.
CO 3- Learning the Special purpose mechanism (governor, Gyroscope Cam and followers
etc) used in designing of a machine
CO 4- Prepare practical model using the various linkages.

List of Experiments:
1. To carry out static balancing on static balancing machine.
2. To carry out dynamic balancing on dynamic balancing machine.
3. To determine the moment of inertia of connecting rod by tri-flair suspension
pendulum.
4. To determine the moment of inertia of connecting rod by compound pendulum
method.
5. To Prepare performance characteristic Curves, and to find stability & sensitivity on
Proell, Porter Governors and Hartnell Governor.
6. To Determine gyroscopic couple on Motorized Gyroscope.
7. To Study of different types of brakes and dynamometers and finding out Brake power.
8. To determine the natural frequency of undamped torsional vibration of a single rotor
shaft system.
9. To determine the frequency of damped force vibration of a spring mass system.
 ME-353C REFRIGERATION & AIR CONDITIONING LAB
B. Tech (Mechanical Engineering) V Semester

No. of Credits: 1 Sessional: 15 Marks

L T P Total Practical: 35 Marks
0 0 2 2 Total: 50 Marks

Pre- Requisite: Refrigeration and Air-conditioning

Successive: Air Conditioning Equipments

Course Objectives:
To develop domain knowledge in the field of refrigeration and air conditioning. To
understand the working of various refrigeration system and various control devices used in
refrigeration system.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Understand the vapour compression refrigeration system and vapour absorption
system.
CO 2- Application of different compressors used in refrigeration system..
CO 3- Understand functioning of various control devices
CO 4- Evaluate the COP of various refrigeration system such as vapour compression
refrigeration system and vapour absorption system.
CO 5- Knowledge of how the loading condition changes the COP of the system.

List of Experiments:

1. To determine the C.O.P. and draw P-H and T-S diagrams for the vapour compression
Refrigeration System.

2. To find the C.O.P. of the Mechanical heat pump.

3. To find the C.O.P. of the Air and Water heat pumps.

4. To study the cut-sectional models of Reciprocating and Rotary Refrigerant

compressor.

5. To analyze the various controls used in Refrigerating & Air Conditioning systems.

6. To find the C.O.P. and capacity of an Ice- plant.

7. To analyze the humidification, heating, cooling and dehumidification processes and
plot them on Psychrometric charts.

8. To find the C.O.P. of vapour absorption system.

9. To find the performance parameters of the cooling tower.

10. To find the C.O.P of Water Cooler.

11. To study the chilling plant and its working cycle.

12. To study and find the By Pass factor of heating & cooling coils & plot them on
psychometric chart for different inlet conditions.
 ME-302C HEAT AND MASS TRANSFER
B. Tech (Mechanical Engineering) VI Semester

No. of Credits: 4 Sessional: 25 Marks

L T P Total Theory: 75 Marks
3 1 0 4 Total : 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: Thermodynamics
Successive: Estimation and Design of RAC Plants, Power Plant Engineering

Course Objectives:
To introduce the basics of three modes of heat transfer and mass transfer under steady state
conditions. To introduce the empirical relations for convection (forced, natural, change of
phase).
Course Outcome (COs): At the end of the course, the student shall be able to:
CO 1- Understand the basic concept of conduction, convection and radiation heat transfer.
CO 2- Formulation of one dimension conduction problems.
CO 3- Application of empirical correlations for both forced and free convection for
determines the value of convection heat transfer coefficient.
CO 4- Expedite basic concept of the radiation heat transfer for black and grey body.
CO 5- Learning of thermal analysis and sizing of Heat exchangers.
CO 6- Conceptualization of mode of mass transfer.

Syllabus:

UNIT I Introduction: Various modes of heat transfer, Fourier's, Newton's and Stefan
Boltzman's Law. Combined modes of heat transfer, thermal diffusivity, overall
heat transfer coefficient.

UNIT II Conduction: Thermal conductivity of solids, liquids and gases, factors influencing
conductivity and it’s measurement. The general differential equation of
conduction. One dimensional steady state and unsteady state conduction, linear
heat flow through a plane and composite wall, tube and sphere, critical thickness of
insulation, Effect of variable thermal conductivity, Conduction with heat sources,
heat transfer from rods heated at one/ both ends. Heat transfer from fins of uniform
cross-section. Errors of measurement of temperature in thermometer wells.

UNIT III Convection: Introduction to free and force convection, laminar boundary layer
equations on a flat plate and in a tube for free and force convection, simple
 Reynold's analogy, Empirical relationship for free and forced convection.
Convection with phase change, Description of condensing flow. A theoretical
model of condensing flow, Boiling heat transfer, Empirical relationships for
convection with phase changes.

UNIT IV Heat Exchangers: Introduction and different types of heat exchangers;

Determination of heat exchanger performance by Heat exchanger transfer units and
LMTD methods and their limitations, Analysis restricted to parallel and counter
flow heat exchanger.

UNIT V Thermal Radiation: Introduction, surface emission properties, absorptivity,

reflectivity and transmissivity. Black and non black bodies, Planck’s law, Stefan-
Boltzman law, Kirchoff's law, Intensity of radiation and Lambert’s cosine law.

Radiation exchange between black bodies, Shape factor algebra and it’s feature,
Heat exchange between non black bodies, Electrical analogy to simple problems.
Radiation heat exchange for three gray surfaces, Radiation shield, Non-luminous
gas radiation.

UNIT VI Introduction to Mass Transfer: Introduction and modes of mass transfer, Mass
and mole concentrations, , molecular diffusion, eddy diffusion, fick’s law, General
equation of mass diffusion in stationary media, Diffusion of water vapours through
air, Convective mass transfer and it’s correlations.

Text Books:

1. Kothandaraman, CP., "Fundamentals of Heat and Mass Transfer", Second Edition, New
Age International Publishers, Chennai, 1997.
2. Sachdeva, KC, "Fundamentals of Engineering Heat and Mass Transfer", New Age
International Publishers, New Delhi, 1996.
3. Holman, J.P., "Heat Transfer", Tata McGraw Hill Book Company, 1988

4. Heat and mass Transfer by D.S.Kumar, S.K.Kataria and Sons, New Delhi.
 ME-304C COMPUTER AIDED DESIGN
B.Tech (Mechanical Engineering) VI Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory: 75 Marks
3003 Total : 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: Auto CAD, Engineering Drawing, Machine Drawing
Successive: CAM and Automation

Course Objectives:
To understand the fundamentals of CAD and CAE for Design and development of
mechanical systems.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Understand the basic fundamentals of computer aided designing.
CO 2- Learning Transformations and types of surfaces.
CO 3- Exploration of the techniques of 3D modeling of various mechanical parts.
CO 4- Expedite the procedure and benefits of FEA and CAE.

Syllabus:

UNIT I Introduction: Need and Scope of Computer Aided Design, Fundamental of CAD
and computer graphics- Application areas, Comparison of CAD with Manual
designing, Benefits of CAD, Introduction to 2D Drafting, Isometric to orthographic
views generation, Drawing standards, dimensioning and text writing, concept of
layers, advanced concepts of CAD software- blocks, UCS, 3D-line, 3D objects,
STP, IGES, DXF & DXB file formats. Output primitives- Points and lines, line,
drawing algorithms, Program code generation using C/C++.

UNIT II Geometric Transformations: 2-D geometrical transforms- Translation, scaling,

rotation, reflection and shear transformations. Matrix representations and
homogeneous coordinates, composite transformations, transformations between
coordinate systems. 2-D viewing- The viewing pipeline, Window to view port
coordinate transformation. 3-D Geometric transformations- Translation, rotation,
scaling, reflection and shear transformations, composite transformations.
Importance of transformations.
UNIT III Modeling of Curves and Surfaces: Representation of circle, Arc, Ellipse,
parabola and hyperbola.
Synthetic Curves: Concept of continuity, Cubic Spline: equation, properties and
blending. Bezier Curve: equations, properties; Properties and advantages of B-
Splines and NURBS.
Types of surfaces used in automotive industry along with their applications.
Techniques for modeling of these surfaces in a design packages.

UNIT IV Solid Modeling: Geometry and Topology, Comparison of wireframe, surface and
solid models, Properties of solid model, properties of representation schemes,
Concept of Half-spaces, Boolean operations. Schemes: B-rep, CSG, Sweep
representation, ASM, Primitive instancing, Cell Decomposition Techniques.

UNIT V Finite Element Analysis: Review of stress-strain relation and generalized Hooke's
Law, Plane stress and Plane strain conditions; Failure and its type; FOS, Types of
FEA. Theories of Failure, Principal stresses and strains, Von-mises stress and
Deflection in structural systems.

UNIT VI Computer Aided Engineering: Preprocessing, Elements type, Material defining,

Meshing- coarse and fine, optimal mesh, loading and constraints, boundary
conditions, solvers, post processing and reviewing the results, validation of the
CAE results, Case study using ANSYS software.

Text Books:
1. Ibrahim Zeid CAD/CAM - Theory and practice Tata McGraw Hill Publishers.
2. Salomon, D. Transformations and projections in computer graphics Springer.
3. Nitin S.Gokhale: Practical Finite element analysis.
 ME-306C CAM AND AUTOMATION
B. Tech (Mechanical Engineering) VI Semester
No. of Credits: 3 Sessional : 25 Marks
L T P Total Theory : 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam : 3 Hours
Pre- Requisite: Manufacturing Processes
Successive: Industrial Controls, Mechatronics

Course Objectives:
To study and familiarize the students with the advanced machines like NC, CNC, DNC and
robotics. To study the basic steps in manufacturing a component on a CNC machine.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Understand the basics of NC, CNC, DNC and adaptive control systems.
CO 2- Develop CNC programs to manufacture industrial components.
CO 3- Acquire knowledge about advanced manufacturing systems like FMS and CIM.
CO 4- Demonstrate the knowledge of Robotics in manufacturing industries.
CO 5- Knowledge of basic principle and elements of automation and control in
manufacturing.

Syllabus:
UNIT I Introduction to Numerical Control: NC components, NC coordinate systems,
Point to point, line and contouring systems, open and close loop control system,
Steps in NC manufacturing, Advantages, Disadvantages and Applications of NC,
Role of NC/CNC technology in modern manufacturing, Features of CNC system,
components and tooling of machining centre and CNC turning centre, Automatic
tool changer, Feedback devices: Encoders and linear scale, Features of DNC and
adaptive control systems.
UNIT II CNC Programming: Part programming fundamentals, Manual Part Programming,
APT Programming, Geometric & motion commands, Post processor commands,
Safety measures in CNC programming.
UNIT III Robotics: Introduction, Joints and links used in robots, Robot physical
configurations, Joint drive systems, Robot control systems, End effectors, Sensors
in robotics, Robot motion systems, Technical features of robot like work volume,
precision of movement, speed of movement, weight carrying capacity,
 Programming methods of robot, Robot programming languages, Intelligent robots,
Vision systems, Applications of Industrial robots, Safety measures.
UNIT IV Flexible Manufacturing System: Components of FMS, FMS equipment &
control, Programmable logic controller, Processes interface programming the
PLC, Local area network , Automated guided vehicle systems, Automated storage
and retrieval system, Operational problem in FMS. Computer Integrated
Manufacturing (CIM): Elements of CIM, CIM hierarchy, implementation of
processes
UNIT V Computer Aided Process Planning (CAPP): Introduction to CAPP, Variant &
Generative methods of CAPP, advantages of CAPP.
UNIT VI Elements of Automation: Power to Accomplish the Automated Process, Program
of Instruction, Control System, Advanced automation Functions-safety Monitoring,
maintenance and repair Diagnostics. Automatic identification methods-Overview
of Automatic Identification Methods, Bar Code Technology, Radio Frequency
Identification. Control system components-Sensors, Actuators:electric, hydraulic
and pneumatic. Analog-to-Digital Convertors, Digital-to-Analog Convertors,
Input/output Devices for Discrete Data.
Text Books:
1. Rao, P.N., CAD / CAM Principles and Applications, McGraw Hill Publishers, New Delhi,
2010.
2. M.P.Groover , Automation, production systems and Computer-integrated Manufacturing, ,
Eastern Economy Edition.
Reference Books:
1. Ibrahim Zeid and Sivasubramanian, R., CAD/CAM Theory and Practice, Tata McGraw
Hill Publications, New Delhi, 2009.
2. Yoram Koren, Computer Control of Manufacturing Systems, McGraw Hill Publications,
2005.
3. Nanua Singh , System approach to Computer-integrated design and manufacturing, ,
Wiley India.
4. T. C. Chang, R. A. Wysk and H. P. Wang, Computer Aided Manufacturing, Pearson
 ME-308C MACHINE DESIGN- II
B. Tech (Mechanical Engineering) V Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory: 75 Marks
3003 Total : 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: Mechanics of Solids, Machine Design I
Successive: Design and Optimisation, Tribology
Course Objectives:
To study essential concepts of fatigue design and factor of safety selection. To study design
components such as shaft design of static and dynamic loading, keys, cylinder, clutches,
springs and mechanical joints.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Expose the students to the Design for Production and for variable loading.
CO 2- Impart in depth knowledge of designing of screws and different types of fasteners.
CO 3- Design bearings, selection of bearings for different aspects & lubricants with their
properties.
CO 4- Knowledge of gears, design of different types of gears with consideration of
maximum power transmission and gear lubrication.
CO 5- Learn in depth knowledge of flywheels and their design.
CO 6- Understand the design procedure for miscellaneous components such as connecting
rod, crankshaft and C- clamp.

Syllabus:

UNIT I Design for Production: Ergonomic and value engineering considerations in design,
Role of processing in design, Design considerations for casting, forging and
machining. Variable Loading: Different types of fluctuating/ variable stresses,
Fatigue strength considering stress concentration factor, surface factor, size factor,
reliability factor etc., Fatigue design for finite and infinite life against combined
variable stresses using Goodman and Soderberg’s Criterion, Fatigue design using
Miner’s equation, Problems.

UNIT II Design of Screws and Fasteners: Thread standards and definitions, mechanics of
power screws, threaded fasteners, fastener stiffness.
UNIT III Design of Bearings: Selection of ball and roller bearing based on static and
dynamic load carrying capacity using load-life relationship, Selection of Bearings
from manufacturer’s catalogue, types of lubrication – Boundary, mixed and
hydrodynamic lubrication, Design of journal bearings using Raimondi and Boyd’s
Charts, Lubricants and their properties, Selection of suitable lubricants, Design
Problems.

UNIT IV Gears: Classification, Selection of gears, Terminology of gears, Force analysis,

Selection of material for gears, Beam & wear strength of gear tooth, Form or Lewis
factor for gear tooth, Dynamic load on gear teeth -Barth equation and Buckingham
equation and their comparison, Design of spur, helical, bevel & worm gear including
the Consideration for maximum power transmitting capacity, Gear Lubrication,
Design Problems.

UNIT V Design of Flywheels: Turning moment diagram, coefficient of fluctuation of energy

and speed, design of solid and rimmed flywheel.

UNIT VI Design of Miscellaneous Components: Crane hook, C-clamp, Machine Frame,

Crank Shaft and Connecting Rods.

Text Books:
1. Mechanical Engineering Design- Joseph Edward Shigley-Mc Graw Hill Book Co.
2. Design of Machine Elements – V.B. Bhandari – Tata McGraw Hill, New Delhi.
Reference Books:
1. Engineering design – George Dieter, McGraw Hill, New York.
2. Machine Design an Integrated Approach: Robert L. Norton, Second Edition –Addison
Wisley Longman.
 ME-352C HEAT AND MASS TRANSFER LAB
B.Tech (Mechanical Engineering) VI Semester
No. of Credits: 1 Sessional: 15 Marks
L T P Total Theory : 35 Marks
002 2 Total : 50 Marks

Pre- Requisite: Heat And Mass Transfer

Successive: Power Plant Engineering

Course Objectives:
To develop domain knowledge in the field of heat and mass transfer with the help of various
equipments for measuring conduction, convection and radiation heat transfer.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Understanding the conduction heat transfer coefficient.
CO 2- Design and analyze heat transfer system with practical demonstration.
CO 3- Selection of equipments and their practical demonstration in heat transfer design.
CO 4- Knowledge of development about mass transfer.

List of Experiments:
1. To determine the thermal conductivity of a metallic rod.
2. To determine the thermal conductivity of an insulating power.
3. To determine the thermal conductivity of a solid by the guarded hot plate method.
4. To find the effectiveness of a pin fin in a rectangular duct natural convective
condition and plot temperature distribution along its length.
5. To find the effectiveness of a pin fin in a rectangular duct under forced convective
and plot temperature distribution along its length.
6. To measure the emmisivity of the gray body (plate) at different temperature and plot
the variation of emmisivity with surface temperature.
7. To find overall heat transfer coefficient and effectiveness of a heat exchange under
parallel and counter flow conditions. Also plot the temperature distribution in both the
cases along the length of heat of heat exchanger.
8. To verify the Stefen-Boltzmann constant for thermal radiation.
9. To conduct test on a heat pipe and compare the temperature distribution and rate of
heat transfer with geometrically similar copper and stainless steel tubes.
10. To study the two phases heat transfer unit.
11. To determine the water side overall heat transfer coefficient on a cross-flow heat
exchanger.
12. Design of Shell and Tube heat exchanger.
 ME-354C COMPUTER AIDED DESIGN LAB
B.Tech (Mechanical Engineering) VI Semester
No. of Credits: 1 Sessional: 15 Marks
L T P Total Theory : 35 Marks
002 2 Total : 50 Marks

Pre- Requisite: Computer Aided Design

Successive: Design and Optimisation

Course Objectives:
To understand the fundamentals of CAD and CAE for design and development of mechanical
systems.

Course Outcomes (COs): At the end of the course, the student shall be able to:

CO 1- Display of the basic fundamentals of modeling package.

CO 2- Explore the surface and solid modeling features.

CO 3- Learning the techniques of 3D modeling of various mechanical parts.

CO 4- To expedite the procedure and benefits of FEA and CAE.

List of Experiments:

1. Introduction to CATIA/ Solidworks and working with sketch mode

2. Working with creating features (Extrude & Revolve), Axis and Planes.

3. Working with the tools like Hole, Round, Chamfer and Fillet.

5. Working with the tools like Pattern, Copy, Rotate, Move and Mirror.

6. Working with advanced modeling tools (Sweep, Blend, Variable section Sweep, Swept
Blend & Helical Sweep).

8. Assembly modelling in Pro/E, Generating, editing and modifying drawings in

CATIA/Solidworks.

9. FEA of the cantilever beam with concentrated load and UDL using ANSYS package.
 ME-356C CAM AND AUTOMATION LAB
B. Tech (Mechanical Engineering) VI Semester

No. of Credits: 1 Sessional : 15 Marks

L T P Total Practical : 35 Marks
0 0 2 2 Total : 50 Marks

Pre- Requisite: CAM and Automation

Successive: Mechatronics
Course Objectives:
To develop domain knowledge in the field of CNC and robotics. To prepare and execute the
program for different components on CNC machine.
Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Identify different axes, machine zero, home position of CNC machines.
CO 2- Prepare part program for drilling, machining and turning operations on CNC machine.
CO 3- Apply the programming method of robotic system.
CO4- Handle the working of an CNC and robotic system.

List of Experiments:
1. To get knowledge of various safety points in CNC Lab

2. To get knowledge of various safety points in Robotics Lab

3. To perform step turning and facing on MS component using CNC turning centre

4. To perform taper turning on MS component using CNC turning centre

5. To perform OD grooving on MS component using CNC turning centre

6. To perform external threading operation on MS component using CNC turning centre

7. To perform top milling and side milling on MS component using CNC machining centre

8. To perform drilling operation on MS component using CNC machining centre

9. To cut an intricate shape on wire cut- CNC Machine

10. To teach robotic arm a point in space by using teach pendant

11. To draw a triangle in particular frame by using KR-16 robotic arm

12. To draw the above triangle in different frame with the same programme

13. To construct an array of 3*3 by using robotic arm

14. To make a complicate shape involving arcs and circles by using teach pendant
 ME-402C OPERATIONS RESEARCH
B. Tech (Mechanical Engineering) VIII Semester
No. of Credits: 4 Sessional: 25 Marks
L T P Total Theory: 75 Marks
3104 Total : 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: Numerical Methods
Successive: Project Management
Course Objectives:
Study the role of operational research in decision making. Learn, identify and develop
operational research models from the verbal description of the real system. Understand the
mathematical tools that are needed to solve optimisation problems. To study various types of
deterministic and stochastic models for operations research viz. linear programming, waiting
time model, project line model, transportation model, simulation.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Discuss the role of operations research in decision-making, and its applications in
industry and should be able to formulate and design real-world problems through
models & experiments.
CO 2- Knowledge of various types of deterministic models like linear programming,
transportation model etc.
CO 3- Explore various types of stochastic models like waiting line model, project line model,
simulation etc.
CO 4- Deduce the relationship between a linear program and its dual and perform sensitivity
analysis.
CO 5- Describe different decision making environments and apply decision making process
in the real world situations.
Syllabus:

UNIT I Introduction: Definition, role of operations research in decision-making,

applications in industry. Concept on O.R. model building –Types & methods.

UNIT II Programming (LP): Programming definition, formulation, solution- graphical,

simplex, BIG-M methods, Duality, PRIMAL-DUAL relations-its solution,
shadow price, economic interpretation, dual-simplex, post-optimality &
sensitivity analysis, problems.
UNIT III Deterministic Model: Transportation model-balanced & unbalanced, north
west rule, Vogel’s Method, least cost or matrix minimal, Stepping stone method,
MODI methods, degeneracy, assignment, traveling salesman, problems.

UNIT IV Waiting Line Models: Introduction, queue parameters, M/M/1 queue,

performance of queuing systems, applications in industries, problems.

UNIT V Project Line Models: Network diagram, event, activity, defects in network,
PERT & CPM, float in network, variance and probability of completion time,
project cost- direct, indirect, total, Introduction to crashing of network &
resources leveling in project, problems.

UNIT VI Simulation and Decision Theory: Introduction, design of simulation, models

& experiments, model validation, process generation, time flow mechanism,
Monte Carlo methods- its applications in industries, Decision process, SIMON
model, types of decision making environment - certainty, risk, uncertainty,
decision making with utilities, problems.

Note: Concerned software’s may be used to solve OR problems.

Text Books:
1. Operation Research – TAHA, PHI, New Delhi.
2. Quantitative Techniques- Vohra, TMH, New Delhi
Reference Books:
1. Operation Research- Gupta & Sharma, National Publishers, New Delhi.
2. Introduction to Operations Research – Churchman, Ackoff, Arnoff. Pub. John Wiley
3. Principles of operation Research (with Applications to Managerial Decisions) by
H.M.Wagher, Prentice Hall of India, New Delhi.
4. Operation Research – Sharma, Gupta, Wiley Eastern, New Delhi.
5. Operation Research – Philips, Revindran, Solgeberg, Wiley ISE.
Web Links:
http://nptel.ac.in/courses/112106134/
http://nptel.ac.in/courses/112106131/
 ME-309C PRINCIPLES OF MANAGEMENT (DSE - I)
B. Tech (Mechanical Engineering) V Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory: 75 Marks
3003 Total : 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: None
Successive: Quality Management
Course Objectives:
To know the general principles of management. To understand the various aspects of
marketing, service and maintenance management. Able to develop the proper operation
strategy.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Understand various functions and aspects of management.
CO 2- Apply marketing concepts and tools for successful launch of a product.
CO 3- Knowledge of various aspects of service management.
CO 4- Learn the role of maintenance management.
CO 5- Application of various management techniques.
CO 6- Develop the proper operations strategy.
Syllabus:
UNIT I Introduction: Concept and significance of Management, Functions of management
and their interrelationship, Management thoughts, Nature & purpose of management,
Management- an art or science, Management vs. administration, Levels of
management and skills required, Management functions, Branches of management,
Management model.

UNIT II Marketing: Evolution of modern marketing concept, Functions of marketing

management, Advertisement- Importance, choice of Media and criticism, Marketing
mix, Marketing Research Process.

UNIT III Service Management : Introduction, Definition and characteristics of service,

Intangibility aspects, service matrix and model, SERVQUAL and SERVPERF

UNIT IV Maintenance Management : Introduction, Objectives, Maintenance Costs,

Types, TPM
UNIT V Management Techniques: Conventional management tools, applications of cause
& effect diagram, Pareto analysis, Force field analysis, Introduction to techniques-
JIT, SCM, ERP, Six Sigma, TQM.

UNIT VI Operations Strategy: Introduction, Operation Decisions, Operations Priorities,

Components, Types, Framework, Development and Implementation, Porter’s Five
Forces model.

Text Books:
1. Claude S. George. , Management for Business and Industry, PHI Private Ltd.
2. Chhabra T. N., Principles and Practices of Management, Dhanpat Rai & Co.
3. Prasad L. M., Principles and Practices of Management, Sultan Chand & Sons
4. Gupta C. B., Management (Theory and Practice), Sultan Chand & Sons

Reference Books:
1. Telsang, M., Industrial Engineering and Production Management, S.Chand
2. Koontz, H. Essentials of Management, Tata McGraw-Hill Education
 ME-311C NEW VENTURE CREATION (DSE - I)
B. Tech (Mechanical Engineering) V Semester

No. of Credits: 3 Sessional: 25 Marks

L T P Total Theory: 75 Marks
3003 Total : 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: Industrial Engineering
Successive: Production Planning and Control

Course Objectives:
To understand entrepreneurship and entrepreneurial process in context of economic
development. Able to launch a new venture by identifying the entrepreneurial opportunities,
support and resource requirements.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Understand entrepreneurship and entrepreneurial process and its significance in
economic development.
CO 2- Develop an idea of the support structure and promotional agencies assisting ethical
entrepreneurship.
CO 3- Identify entrepreneurial opportunities, support and resource requirements to launch a
new venture within legal and formal frame work.
CO 4- Apply Develop a framework for technical, economic and financial feasibility.
CO 5- Evaluate an opportunity and prepare a written business plan to communicate business
ideas effectively.
CO 6- Knowledge of stages of establishment, growth, barriers, and causes of sickness in
industry to initiate appropriate strategies for operation, stabilization and growth.
Syllabus:
UNIT I Entrepreneur and Entrepreneurship: Introduction; Entrepreneur and
Entrepreneurship; Role of entrepreneurship in economic development;
Entrepreneurial competencies and motivation; Institutional Interface for Small Scale
Industry/Enterprises.

UNIT II Establishing Small Scale Enterprise: Opportunity Scanning and Identification;

Creativity and product development process; Market survey and assessment; choice
of technology and selection of site.
UNIT III Planning a Small Scale Enterprises: Financing new/small enterprises; Techno
Economic Feasibility Assessment; Preparation of Business Plan; Forms of business
organization/ownership.

UNIT IV Operational Issues in SSE: Financial management issues; Operational/project

management issues in SSE; Marketing management issues in SSE; Relevant
business and industrial Laws.

UNIT V Performance appraisal and growth strategies: Management performance

assessment and control; Causes of Sickness in SSI, Strategies for Stabilization and
Growth.

UNIT VI Life cycle of production management: Stages in life cycle of production

management and Major managerial Decisions involved in each stage.

Text Books:
1. Bruce R Barringer and R Duane Ireland, Entrepreneurship: Successfully Launching New
Ventures, 3rd ed., Pearson Edu., 2013.
2. D.F. Kuratko and T.V. Rao, Entrepreneurship: A South-Asian Perspective, Cengage
Learning, 2013.
Reference Books:
1. Dr. S.S. Khanka, Entrepreneurial Development (4th ed.), S Chand & Company Ltd., 2012.
2. Dr. Vasant Desai, Management of Small Scale Enterprises, Himalaya Publishing House,
2004.
 ME-313C WELDING TECHNOLOGY (DSE - I)
B. Tech (Mechanical Engineering) V Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory: 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: Manufacturing Process
Successive: Project work

Course Objectives:
To study essential concepts for welding processes. To study various techniques for weld
testing. To study the concept special welding processes and welding automation.

Course Outcome (COs): At the end of the course, the student shall be able to:

CO 1- Principles and applications of oxyacetylene and electric arc welding.

CO 2- Understand various types of weld testing.
CO 3- Knowledge of techniques of welding automation.
CO 4- Methods of advanced and special welding processes.

Syllabus:

UNIT I Oxy-Acetylene Welding: Introduction: Welding processes and their

principles, Industrial Applications, Principles of Oxy- Acetylene Welding,
Procedure, Types of flames, Poping, Flash Back and Fire. Equipment and
Accessories: Torches, Regulators, Pressure Gauges, Gas Cylinders, Filler Rods
and Welding Fluxes. Welded Joints and their Defects: Types of Joints and
Welding Positions, Common Welding Defects and their control.

UNIT II Electric Arc Welding: Principle of Electric Arc Welding: Principle, Welding
Procedure, Arc Length, Arc Force and Arc Blow. Equipment and Accessories:
Welding Machines, A.C. and D.C. Transformers, Motor Generators, Rectifiers,
Use of Tong Tester for measuring welding currents, Types of Electrodes and
Indian system of classification and coding of covered Electrodes for Mild Steels.

UNIT III Special and Allied Welding Processes: Resistance Welding: Principle,
Types and Applications, Equipment and Machinery required. Metal Inert Gas Arc
Welding (MIG): Principle, Advantage of Gas Shielded Arc Welding, Types of
 Metal Transfer, Welding Equipment and Shielding Gases, MIG Welding and its
components. CO2 Welding: Difference from MIG Welding, Principle of operation,
Welding Equipments, Welding Parameters, Joint Design, Welding Procedure,
Advantages, Disadvantages and Applications. Tungsten Inert Gas Arc Welding:
Welding Equipment-Electrodes, Inert gases and Torches, Inert gas shielded, Spot
welding Processes. Submerged Arc Welding: Principle of the Process and its
Applications, Fluxes and Welding Rods. Soldering and Brazing: Soft and Hard
Solders, Fluxes, Soldering Iron, Soldering procedure, principle of Brazing and
different methods of Brazing, Comparison between Brazing and Soldering.

UNIT IV Destructive Testing of Welds: Destructive tests: their advantage and Types
such as Tensile Test, Bend Test, Impact Test, Hardness Test, Fatigue Tests,
Equipment required and the test piece Geometry. Computer systems for
Welding Engineering: Introduction, computer systems, software for welding
engineers, magdata, weldcost, weldvol, distortcalc, cutbest, weldbest, ferrite
predictor and weld selector.

UNIT V Non Destructive Testing of Welds: Non Destructive Tests: their Advantages and
Limitations, Comparison with Destructive Tests, Visual Examination, Dye
Penetrant Inspection, Magnetic Particle Inspection, X-Rays and Gamma Rays
Inspection and Ultrasonic Inspection of Welds. Standards/ codes for welding.

UNIT VI Automation in Welding: Introduction, Manual Welding, Semi-Automatic

Welding, Automatic Welding, Welding Mechanization, Flexible Automated
Welding, Robotic Welding, Types of Welding Robots, Robot Selection
Mechanics, Joint tracking system.

Text Books:
1. Welding and Welding Technology by R. Little- Tata McGraw Hill Publication.
2. Welding Processes and Technology by R. S. Parmar- Khanna Publication.
Reference Books:
1. Welding Technology by Koeingsberger, J. R. Adair- Macmillan.
2. Welding Technology by Rossi- Mc Graw Hill Publications.
3. Welding Handbook, Eighth Edition, Vol. 1 & 2- American Welding Society.
 ME-315C AIRCRAFT ENGINE OPERATION & MAINTENANCE (DSE - I)
B. Tech (Mechanical Engineering) V Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory: 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: Thermodynamics, Fluid Mechanics
Successive: Project

Course Objectives:
To understand the principles of operation of aircraft power plant, general familiarization of
aircraft engine systems, maintenance procedures and standard practices.

Course Outcomes (COs):

CO 1- Exploring principles of flight and the basic thermodynamics involved.

CO 2- Application of fundaments of the propulsion system in an aircraft.

CO 3- Expedite Design and working of an aircraft engine.

CO 4- Understanding standard practices and the inspection procedures of the aircraft

operation.

Syllabus:

UNIT I Principles of Flight: History of flight, aircraft configuration and its control, basics
of aerodynamics.

UNIT II Thermodynamics: First law of thermodynamics, Second law of thermodynamics

and Air standard cycles (Brayton Cycle).

UNIT III Propulsion: Fundamentals of gas turbine engines-thrust equation, factors

effecting thrust, effect of pressure, velocity and temperature changes through the
compressor, characteristics of turbo-prop, turbo fan and turbo jet, classification and
types of compressors- centrifugal and axial compressor characteristics,
classification of combustion chambers and its performance, convergent/divergent
nozzles, classification of turbines, its operation.

UNIT IV Engine Systems: Overview of engine construction, fuel system, lubrication

system, compressor air flow control system, turbine vanes and blade cooling, Full
 authority digital electronic engine control, Thrust Reversers, Engine starting and
Ignition, Fire protection system, Engine Inlet cowling anti icing, environmental
control system and engine indicating system.

UNIT V Standard Practices and Special Inspection Procedures: Standard practices used
in aero engine maintenance, introduction to engine overhaul, overview of Bore
scope inspection procedures, and introduction to geared turbo fan engines

References:

1. Kermode, A.C. Flight without formulae, Pearson Education; 11 th edition, 2011

2. Anderson, J.D. Introduction to flights, McGraw-Hill 8th edition 2015
3. Engineering Thermodynamics- P K Nag, Tata McGraw Hill
4. Thermodynamics: An Engineering Approach- Cengel and Boles, McGraw Hill
Company
5. Hill P.G & Peterson, C.R. “Mechanics & Thermodynamics of propulsion” Pearson
education (2009)
6. United Technologies’ Pratt & Whitney, “The Aircraft Gas Turbine Engine and its
Operation
7. Kroes & Wild, “Aircraft Power Plants”, 7th Edition- McGraw Hill, New York, 1994
8. Mekinley, J.L and R.D. Bent, Aircraft Power Plants, McGraw Hill 1993
9. Teager, S, “Aircraft Gas Turbine Technology, McGraw Hill 1997.
10. Aviation Maintenance Technician Hand Book- Power Plant Volume -2 FAA-H-
8083-32
 ME-317C METALLURGY (DSE -I)
B. Tech (Mechanical Engineering) V Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory: 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: Material Science, Manufacturing Processes
Successive: Tool Design

Course Objectives:
To study various concepts of transformation in metals. To study heat treatment and case
carburizing process, non destructive testing of metals, failure analysis, phase diagrams and
cooling curves.
Course Outcomes (COs): At the end of the course, the student shall be able to:

CO 1- Knowledge of types of solid solution and phase diagram.

CO 2- Develop utility and applications of metallography.
CO 3- Understanding the mechanism of fracture.
CO 4- Learn heat treatment process and various factors affecting the heat treatment process.

Syllabus:

UNIT I Solid Solutions: Types of Solid Solutions, Substitutional Solid Solution,

Disordered Substitutional Solid Solution, Ordered Substitutional Solid Solution,
Interstitial Solid Solution, Hume Rothery's Rules

UNIT II Phase Diagrams: Systems, Phases and Structural Constituents, Cooling Curves,
Phase Diagrams, Interpretation of Phase Diagrams, Gibb's Phase Rule, Classification
of Equilibrium Diagrams, Two Metals Completely Soluble in Liquid and Solid State,
Peritectic Reaction, Eutectoid Transformation, Peritectoid Transformation

UNIT III Iron - Carbon System: Iron, Allotrophy, Micro-constituents of Iron and Steel, Iron
- Carbon Equilibrium Diagram, Effect of Alloying Elements on the Properties of
Steels, Pearlite Transformation, T.T.T. Diagram, Martensite Transformation,
Austenite Grain Size and Grain Size Control

UNIT I V Metallography: Introduction and Definition, Metallurgical Microscope, Preparation

of Specimen, Micro and Macro Examination, Electron Microscope
UNIT V Heat Treatment Processes: Classification of Heat Treatment Processes, Purpose
of Heat Treatment, Principles of Heat Treatment, Annealing-Definition, Purpose
and Concepts of (a) Stress Relieving (b) Process Annealing (c) Spheroidising
and Full Annealing.

UNIT VI Case Hardening and Surface Treatment: Carburizing, Pack Carburizing, Gas
Carburizing, Nitriding, Cyaniding, Flame Hardening, Induction Hardening

Text Books:
1. Elements of Physical Metallurgy –Albert G.Guy – Addison Wesley
2. Metallurgy for Engineers - Rollason – Edward Arnold Publishers
3. Mechanical Metallurgy – Dieter – McGraw Hill
4. Physical Metallurgy for Engineers – Clark – Eastern Western Publishers
5. Elements of Material Science - Vlack - Addison Wesley
6. Engineering Physical Metallurgy - Lakhtin – CBS Publications
 ME-310C INDUSTRIAL MANAGEMENT (DSE - II)
B.Tech (Mechanical Engineering) VI Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory : 75 Marks
300 3 Total : 100 Marks
Duration of Exam: 3 Hours

Pre- Requisite: Industrial Engineering, Principles of Management

Successive: Advanced Manufacturing System

Course Objectives:
To familiarize the students with the various aspects of management. To recognize organization
structure, financial, wages and relation issues in industries and major provisions of factory acts.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO1- Understand given organization structure.
CO2- Describe the financial aspects related to business.
CO3- Explain various aspects of management.
CO4- Knowledge of various methods of job evaluation and merit rating.
CO5- Describe the various factors affecting industrial relations.
CO6- Illustrate the various concepts related to entrepreneurship.

Syllabus:

UNIT I Introduction: Concept of organizational structure, types of organizational

structure, types of business organization, Definition and concept of personnel
management, aims & objectives of personnel management, functions of personnel
management.

UNIT II Aspects in Management: Classical management approach: Frederick Winslow

Taylor's scientific management, Henri Fayol's administrative management, Max
Weber's Bureaucratic management, Social systems approach, Quantitative approach
to management, Qualities of leadership and leadership styles, theories of motivation:
Maslow’s hierarchy of needs theory, Herzberg’s Motivator-Hygiene Theory, Theory
X and Theory Y.

UNIT III Financial Aspects Related to Business: Introduction to financial management,

functions of financial management, meaning and uses of management accounting,
 elements of cost, meaning and factors of depreciation, classification of depreciation
problems, factors responsible for the replacement of equipment, replacement
analysis and its methods.

UNIT IV Job Evaluation and Merit Rating: Meaning of Job evaluation, job evaluation
methods, quantitative and non-quantitative methods of job evaluation, merit rating,
selection of factors in setting up merit rating method, methods of merit rating.

UNIT V Wages and Incentives: Meaning of wages, wage classification, system of wage
payment, Incentives and its types, time-based individual incentive plans, output
based individual incentive plans.

UNIT VI Industrial Relations: Industrial disputes and its results, methods of settling
industrial disputes, Industrial accidents, Effects and causes of accidents, meaning
and classification of industrial legislations, Factories act 1948, worker’s
compensation act 1923, Industrial dispute act 1947.
Text Books:
1. Industrial engineering and Management – O.P. Khanna, Dhanpat Rai Publications
2. Industrial Engineering and Management –V. Ravi, PHI publications
Reference Books:
1. Operations Management - Schroeder, McGraw Hill ISE
2. Production & Operations Management - Martinich, John Wiely SE.
 ME-312C APPLIED THERMODYNAMICS (DSE - II)
B. Tech (Mechanical Engineering) VI Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory : 75 Marks
3 0 0 3 Total: 100Marks
Duration of Exam: 3 Hours
Pre- Requisite: Thermodynamics
Successive: Thermal System Design, Power Plant Engineering

Course Objectives:
To understand essential concepts of flow of steam through nozzles, steam boilers, steam
turbines and energy conversion. To learn about the concept and different components of
vapour power cycles and find the related efficiencies.

Course Outcome (COs): At the end of the course, the student shall be able to:
CO 1- Understand the concept of vapour power cycles and find and compare different
cycles based on their performance parameters and efficiencies.
CO 2- Learn about steam boilers, their types and components.
CO 3- Learn about the fundamentals of flow of steam through a nozzle.
CO 4- Knowledge of working and types of steam turbines and can calculate their
workdone and efficiencies.
CO 5- Understand the concepts, types and working of condensers and compressors and
define their different types of efficiencies.
Syllabus:

UNIT I Steam Boilers and Draft: Classification, comparison between fire and water tube
boilers, Essentials of a good boiler. Constructional and operational details Cochran
and Babcock and Wilcox Boiler. Study of high pressure boilers- Benson, Lamont,
Loeffler and Velox boilers, Boiler mountings and accessories, Boiler performance,
Natural& Artificial drafts, Chimney height, Maximum draft and chimney efficiency,
Boiler heat balance sheet, Problems.

UNIT II Vapour Power Cycles: Carnot and Rankine vapour cycles, effect of operating
conditions on thermal efficiency of Rankine cycle, Rankine cycle with superheat,
reheat and regeneration, Binary vapour cycle, Problems.
UNIT III Flow Through Nozzles: Velocity and heat drop, mass discharge through a
nozzle, critical pressure ratio and its significance, effect of friction and nozzle
efficiency, supersaturated flow, design pressure ratio, Problems.

UNIT IV Steam Turbines: Classification, Impulse Turbine- Flow through blades, velocity
diagram, power output and efficiency, maximum blade efficiency of single stage
impulse turbine, blade friction, compounding of impulse turbine. Reaction Turbine-
Flow through impulse reaction blades, degree of reaction, velocity diagram, power
output, efficiency and blade height, comparison of impulse and impulse reaction
turbines. Losses in steam turbines, stage efficiency, overall efficiency and reheat
factor. Governing of steam turbines, Problems.

UNIT V Steam Condensers: Elements of a condensing plant, types of condensers,

comparison of jet and surface condensers. Condenser vacuum, sources of air
leakage & its disadvantages, vacuum efficiency and condenser efficiency, Problems.

UNIT VI Air Compressors: Working of a single stage reciprocating air compressor;

calculation of work input; Volumetric efficiency; Isothermal efficiency; Advantages
of multi stage compression; Two stage compressor with Inter-cooling; Perfect Inter
cooling; Optimum intercooler pressure. Problems.

Text Books:
1. Thermal Engineering - R.K.Rajput, Lakshmi Publishers
2. Thermal Engineering – P L Ballaney, Khanna Publishers
3. Thermodynamics and Heat Engines vol. II – R Yadav, Central Publishing House

Reference Books:
1. Applied Thermodynamics for Engineering Technologists – T D Eastop and A
McConkey, Pearson Education
2. Heat Engineering – V P Vasandani and D S Kumar, Metropolitan Book Co Pvt Ltd.
Web Links:
NPTEL Video Lecture ,Web: http://nptel.ac.in
 ME-314C TOOL DESIGN (DSE- II)
B. Tech (Mechanical Engineering) VI Semester

No. of Credits: 3 Sessional: 25 Marks

L T P Total Theory: 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: Machine Design
Successive: Project

Course Objectives:
The main objective of this course is to design different tools used in the industries for metal
cutting, metal forming, work piece holding and inspection purposes.

Course Outcomes (COs): At the end of the course, the student will be able to:
CO1- Select and use different cutting tools and their materials according to machining
operations and work piece materials.
CO 2- Select the material and design different gauges.
CO 3- Design jigs and fixtures for conventional and NC machining.
CO 4- Understand the concepts of press tools.
CO 5- Design single point and multipoint cutting tools

Syllabus:
UNIT I Tool Geometry, Tool & Work Piece Material: Common work and Tool
materials, Tool inserts, Specifications of inserts and tool holders, Physical
principle in metal cutting: Chip formation and types of chips, work done in
cutting, BUE on metal cutting, curling & contraction of chip , work hardening,
quality of machines surfaces.

UNIT II Basic Principles of Tool Design: Tool design – An overview, signature of single
point tools, Design of single point turning tool, ISO tool shapes, design of flat and
circular form tools, milling cutter.

UNIT III Introduction to Jigs and fixtures, Work holding devices: Basic principle of six
point location, Locating methods and devices, Principle of clamping and Types of
clamps, Design of jigs: Type of Drill bushes, Classification of drill jigs, Design of
drill jigs, Design of fixtures: Design of milling fixtures.
UNIT IV Press Working Operations: Types of Presses, Tonnage required, Blanking
Tool and parts, Piercing Tool, Progressive Tool and parts, strip layout, scrap
calculation for Blanking and Piercing operations .

UNIT V Brief introduction of CNC machines work holding devices: Tool design for
CNC machines, Fixture design for CNC Machine, Cutting tools for CNC
Machine, Tool holding methods for CNC Machine, ATC and APC for CNC
Machine, Tool presetting for CNC Machine.

UNIT VI Gauges and Gauge Design: introduction, elements and their function, Design of
Plug Gauges and Ring Gauges, Standards, materials for gauges, maintenance and
safety of gauges.
Text Books:
1. Fundamentals of Tool Design – Donaldson – TMH
2. Theory of Metal Cutting and Tool Design – Arshinov – Mir Publishers, Moscow
Reference Books:
1. Fundamentals of Tool Design- ASTME
2. Tool Design- H.W, Pollack – Tarapouevala
3. Jigs and fixtures - P. H. Joshi – McGraw Hill
4. An introduction to Jigs and Fixtures- M.HA Kempster – Whitaker & Sons Ltd.
5. Fundamentals of Tool Design, F.W.Wilson, ASME, PHI, New Delhi
 ME-316C AUTOMOBILE ENGINEERING (DSE - II)
B. Tech (Mechanical Engineering) VI Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory: 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 Hours

Pre- Requisite: Kinematics of Machines, Dynamics of Machines

Successive: None
Course Objectives:
To study function of various components in automotive vehicles and safety consideration in
vehicles. To study clutches, power suspension, brakes, drive lines, universal joints, steering
system, construction and working of hybrid vehicles.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Understand the principle of automobiles drive and advances in automobiles.
CO 2- Explore the concept of various types of clutch.
CO 3- Learn about various types of steering system along with merits and demerits.
CO 4- Knowledge of the various type of hybrid vehicles.
CO 5- Development and understanding of hydrogen based technology for pollution control.

Syllabus:

UNIT I Introduction to Automobiles : Classification, Components, Requirements of

Automobile Body; Vehicle Frame, Separate Body & Frame, Unitised Body, Car Body
Styles, Bus Body & Commercial Vehicle Body Types; Front Engine Rear Drive &
Front Engine Front Drive Vehicles, Four Wheel Drive Vehicles, Safety
considerations; Safety features of latest vehicle; Future trends in automobiles.

UNIT II Clutches : Requirement of Clutches – Principle of Friction Clutch – Wet Type &
Dry Types; Cone Clutch, Single Plate Clutch, Diaphragm Spring Clutch, Multi plate
Clutch, Centrifugal Clutches, Electromagnetic Clutch, Over Running Clutch; Clutch
Linkages.

UNIT III Power Transmission : Requirements of transmission system; General

Arrangement of Power Transmission system; Object of the Gear Box; Different types
of Gear Boxes; Sliding Mesh, Constant Mesh, Synchro- mesh Gear Boxes; Epi-cyclic
 Gear Box, Freewheel Unit. Overdrive unit-Principle of Overdrive, Advantage of
Overdrive, Transaxle, Transfer cases.

UNIT IV Drive Lines, Universal Joint, Differential and Drive Axles: Effect of driving
thrust and torque reactions; Hotchkiss Drive, Torque Tube Drive and radius Rods;
Propeller Shaft, Universal Joints, Slip Joint; Constant Velocity Universal Joints; Front
Wheel Drive; Principle, Function, Construction & Operation of Differential; Rear
Axles, Types of load coming on Rear Axles, Full Floating, Three quarter Floating and
Semi Floating Rear Axles.

UNIT V Suspension Systems: Need of Suspension System, Types of Suspension; factors

influencing ride comfort, Suspension Spring; Constructional details and
characteristics of leaf springs.

UNIT VI Steering System : Front Wheel geometry & Wheel alignment viz. Caster, Camber,
King pin Inclination, Toe-in/Toe-out; Conditions for true rolling motions of Wheels
during steering; Different types of Steering Gear Boxes; Steering linkages and layout;
Power steering – Rack & Pinion Power Steering Gear, Electronics steering.

UNIT VII Automotive Brakes, Tyres & Wheels : Classification of Brakes; Principle and
constructional details of Drum Brakes, Disc Brakes; Brake actuating systems;
Mechanical, Hydraulic, Pneumatic Brakes; Factors affecting Brake performance,
Power & Power Assisted Brakes; Tyres of Wheels; Types of Tyre & their
constructional details, Wheel Balancing, Tyre Rotation; Types of Tyre wear & their
causes.

UNIT VIII Hybrid Automotive Vehicles: Introduction to Hybrid Vehicle, Construction

and working of hybrid vehicles, working of fuel cell vehicle, vehicular fuel cell
system: fuel cell stack, fuel cell engine auxiliaries, electric drive system; benefits of
hybrid vehicles, fuel supply, storage and processing in fuel cells.

Text Books:

1. Automobile Engineering by Anil Chhikara, Satya Prakashan, New Delhi.

2. Automobile Engineering by Dr. Kirpal Singh, standard Publishers Distributors.
3. Automobile Engineering by D.S.Kumar, S.K.Kataria and Sons, New Delhi
 ME-318C DESIGN OF THERMAL SYSTEMS (DSE – II)
B. Tech (Mechanical Engineering) VI Semester

No. of Credits: 3 Sessional: 25 Marks

L T P Total Theory: 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: Thermodynamics
Successive: Non Conventional Energy Resource Utilization

Course Objectives:
To understand various types of thermal and air-conditioning processes. To study heat load
estimation, design for air-conditioning building , heat exchangers design and psychometric
process.
Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Understand the heat load estimation of air-conditioning system.
CO 2- General procedure of heat exchanger design in air-conditioning systems.
CO 3- Complete analysis of vapor compression refrigeration system.
CO 4- Environmental consideration in design of thermal systems.
CO 5- Knowledge of thermodynamics of the refrigeration systems.
CO 6- Design of thermal systems.

Syllabus:
UNIT I Psychrometry of Air Conditioning Processes: Design Conditions & Load
Calculations Psychrometric Processes in Air Conditioning Equipments,
Analysis of Air Conditioning systems for summer & winter conditions, Inside &
out side design conditions for comfort, Industrial Air Conditioning. Cooling &
Heating Load calculations- Heat transfer through building structures, solar
heat gain, Infiltration & ventilation air, Internal heat gain, Occupancy &
Product load, Room sensible heat factor, Effective sensible heat factor &
Grand sensible heat factor, capacity of the plant. Design & Selection of Air
conditioning Apparatus Heat & moisture transfer in Air conditioning
apparatus, Enthalpy potential, Analysis of Coil & Spray Equipments, Design of
Cooling & Dehumidifying coils, Design of Air Washer & Cooling Towers.

UNIT II Analysis of Complete Vapour Compression System: Design and

 Balancing of System Components, Type of Refrigerant Compressors,
Condensers, Evaporators & Expansion devices used in Vapour Compression
Refrigeration Cycles, Design and Selection of individual components and
their performance characteristics, Use of P-H charts for different Refrigerants
in performance predication of the cycle. Analysis of the complete vapour-
compression system and determination of ‘Balance Points' using Graphical and
Analytical methods, system simulation. Layout & selection of Refrigerant, water
and Brine pipings for the designed system. Selection of Refrigeration and Air
conditioning Controls for the system.

UNIT III Design of Turbomachines: Principles of Design of turbo machines, Design of

axial flow turbine stage, Design of axial flow compressor stage, Design of
centrifugal compressor.

UNIT IV Design of Heat Exchanger : Study of design aspects, fluid flow and heat
transfer characteristics, Material requirement of heat exchange equipments,
Liquid - to liquid and Liquid - to - gas heat exchange systems, Familiarity with
use of design related standards and codes, Design of Heat exchanger.

UNIT V Optimization of Design of Thermal Systems: like condenser, evaporator, cooling

tower for minimum cost and maximum performance, Development of
computer program for design, Environmental consideration in design of
thermal systems, Analysis of thermal systems using FEM.
Reference Books:
1. Refrigeration & Air Conditioning - by C.P. Arora - TMH
2. Refrigeration & Air Conditioning - by Manohar Prasad – New Age International.
3. Principles of Refrigeration (S.I. Units) - by Roy J.Dossat - AWL.
4. Air Conditioning Engineering - by W,P.Jones - Butterwouth.
5. Heating, Ventilating and Air Conditioning - by Mc Quistion, Parker & Spitler - John
Wiley Publishing Co.
6. Refrigeration & Air Conditioning Data Book - Manohar Prasad – New Age
International
7. Ashrae Hand Book - Fundamentals
8. Refrigeration & Air Conditioning-Stoecker & Jones - Wiley
9. Refrigeration & Air Condioning - by P.L.Ballaney - Khanna Publishers.
 ME-404C MECHATRONICS (DSE - III)
B. Tech (Mechanical Engineering) VIII Semester

No. of Credits: 3 Sessional: 25 Marks

L T P Total Theory: 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 Hours

Pre- Requisite: Kinematics of Machines, Elements of Electronic Engineering

Successive: Advanced Manufacturing System

Course Objectives:
The main objective of this course is to understand the concept and interfacing of various
hardware in mechatronics design of mechanical products and to study control system for
effective functioning of mechatronics systems using digit electronics, microprocessors,
microcontrollers and PLC.

Course Outcome (COs): At the end of the course, the student shall be able to:
CO 1- Generate conceptual design for Mechatronics products based on potential
custom requirements.
CO 2- Select appropriate sensors and actuators.
CO 3- Design a control system for effective functioning of Mechatronics systems
using digit electronics, microprocessors, microcontrollers and PLC.
CO 4- Develop system model for mechanical system.
CO 5- Understand hardware tools to build mechatronics system.

Syllabus:

UNIT I Introduction and Basics: Introduction, Measurement System with its constituent
elements; Open and Closed Loop Systems; Sequential Controllers; Micro-
processor Based Controllers; The Mechatronic Approach.
Hardware of Measurement Systems; A review of Displacement, Position
Velocity, Motion, Force, Fluid Pressure, Liquid Flow, Liquid Level,
Temperature, Light Sensors / along with Performance Terminology; Selection
of Sensors; Input Data by Switches; Signal Conditioning; Brief Review of
Operational Amplifier; Protection; Filtering; Wheat Stone Bridge; Digital
Signals; Multiplexers; Data Acqusition; Digital Signal Processing; Pulse
Modulation; Data Presentation Systems – Displays; Data Presentation
 Elements; Magnetic Recording; Data Acquisition Systems; Testing &
Calibration; Problems.

UNIT II Pneumatic, Hydraulic, Mechanical and Electrical Actuation Systems:

Pneumatic and Hydraulic Systems; Directional Control Valves; Valve
Symbols; Pressure Control Valves; Cylinder Sequencing; Process Control
Valves; Rotary Actuators; Mechanical Systems – Types of Motion, Kinematic
Chains, Cams, Gear Trains, Ratchet & Pawl, Belt & Chain Drives, Bearings,
Mechanical Aspect of Motor Selection; Electrical Systems; Mechanical &
Solid State Switches; Solenoids; D.C. & A.C. Motors; Stepper Motors;
Problems.

UNIT III System Modeling and Performance: Engineering Systems; Rotational –

Translational Systems; Electro-mechanical Systems; Hydraulic – Mechanical
Systems; A review of modeling of First and Second Order Systems and
Performance Measures; Transfer Functions for first order System, Second
Order System, Systems in series & Systems with Feedback Loops; Frequency
Response of First Order and Second Order Systems; Bode Plots: Performance
Specifications: Stability; Problems.

UNIT IV Closed Loop Controllers: Continuous and Discrete Processes – Lag, Steady State
Error; Control Modes; Two- step Mode; Proportional Mode – Electronic
Proportional Controllers; Derivative Control – Proportional plus Derivative
Control; Integral Control - Proportional plus Integral Control; PID Controller
– Operational Amplifier PID Circuits; Digital Controllers – Implementing
Control Modes; Control System Performance; Controller Tuning – Process
Reaction Method & Ultimate Cycle Method; Velocity Control; Adaptative
Control; Problems.

UNIT V Digital Logic and Programmable Logic Controllers : A Review of Number

Systems & Logic Gates; Boolean Algebra; Kanaugh Maps; Sequential Logic;
Basic Structure of Programmable Logic Controllers; Input/ Output Processing;
Programming; Timers, Internal Relays and Counters; Master & Jump
Controls; Data Handling; Analogue Input/ Output; Selection of a PLC;
Problems.
UNIT VI Microprocessors and Input/ Output Systems: Control; Microcomputer
Structure; Micro- controllers; Applications; Programming Languages;
Instruction Sets; Assembly Language Programs; Subroutines; Why C
Language ? A review of Program Structure, Branches, Loops, Arrays, Pointer;
Examples of Programs; Interfacing; Input/ Output; Interface Requirements;
Peripheral Interface Adaptors; Serial Communication Interface; Examples of
Interfacing; Problems.
Design and Mechatronics: Design Process; Traditional and Mechatronics
Design; Possible Mechatronics design solutions for Timed Switch, Wind
Screen Wiper Motion, Bath Room Scale, A Pick & Place Robot, Automatic
Camera, Engine Management System & Bar Code Recorder.

Text Books:
1. Mechatronics by W. Bolton, Published by Addition Wesley.
2. Mechatronics System Design – Devdas Shetty and Richard A. Kolx Brooks/ Cole
1997.
Reference Books:
1. Introduction to Mechatronics and Measuring System: david G. Alciation and Michael
B. Hits and Tata McGraw Hill
2. Mechatronics – Sensing to Implementation - C.R.Venkataraman, Sapna
 ME-406C PRODUCTION PLANNING AND CONTROL (DSE - III)
B. Tech (Mechanical Engineering) VIII Semester

No. of Credits: 3 Sessional: 25 Marks

L T P Total Theory: 75 Marks
3003 Total : 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: Industrial Engineering
Successive: None
Course Objectives:
To know about the different types of production systems. Able to apply the aggregate
planning strategies and scheduling techniques with respective to production systems.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Understand production systems and their characteristics.
CO 2- Evaluate MRP and JIT systems against traditional inventory control systems.
CO 3- Understand basics of variability and its role in the performance of a production
system.
CO 4- Analyze aggregate planning strategies.
CO 5- Apply forecasting and scheduling techniques to production systems.
CO 6- Knowledge of theory of constraints for effective management of production systems.
Syllabus:

UNIT I Introduction to Production Systems: Production Systems: Classification &

Characterization, Overview of Production Planning and Control issues, Review of
EOQ & inventory control systems.

UNIT II Just in Time Production Systems: Just-in-Time System: Evolution, Characteristics

of JIT Systems, Continuous Improvement, The Kanban System, Strategic
Implications of JIT System.

UNIT III Material Requirement Planning: Dependent Demand & Material Requirement
Planning, Structure of MRP system, MRP Calculations, Planning Issues,
Implementation Issues.

UNIT IV Factory Physics: Basic factory dynamics, Variability basics, Push and pull
production systems, Lean manufacturing.
UNIT V Aggregate Planning: Aggregate Planning: Purpose & Methods, Reactive and
Aggressive Alternatives, Planning Strategies, Master Production Scheduling.

UNIT VI Issues in PPC: New developments in Planning & Control of Product-focused

Systems and Process-focused Systems, Theory of Constraints.

Text Books:
1. Production & Operations Management – Chary, TMH, New Delhi.
2. Modern Production Management – S.S. Buffa, Pub.John Wiley.
Reference Books:
1. Krajewski L.J. and Ritzmen L.P., Operations Management: Strategy and Analysis, 9th
Edition, Pearson Education, 2010.
2. Chase, R.B., Jacobs, F.R. and Aquilano, N.J., Operations Management for Competitive
Advantage, 11th Edition, Tata McGraw Hill Book Company, New Delhi, 2010.
3. Hopp, WJ and Spearman, ML, Factory Physics: Foundations of Manufacturing
Management, McGraw Hill International Edition, Third Edition, 2008.
 ME-408C INDUSTRIAL CONTROLS (DSE – III)
B.Tech (Mechanical Engineering) VIII Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory: 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 Hours

Pre- Requisite: Elements of Electronics Engineering,CAM and Automation

Successive: None

Course Objectives:
To study essential concepts of various types of automation, sensors and actuators. To study
automated material handling system. To study various types of programmable logic
controllers.
Course Outcomes (COs): At the end of the course, the student shall be able to:

CO 1- Understand about programmable logic controllers.

CO 2- Complete understanding about communication networks for automation.
CO 3- Expedite the role of human factors in a project.
CO 4- Knowledge of various types of sensors and actuators for various applications.
CO 5- Exploration of flexible manufacturing system for making variety of
components.

Syllabus:
UNIT I Introduction: Meaning and need of automation, Types of automation: fixed,
programmable, flexible, and integrated automation.

UNIT II Components of Automation: Actuators, controllers, sensors. Actuators; Solenoids

and torque motors, Hydraulic and pneumatic actuators, valves and circuits. Sensors;
characteristics, contact and non-contact type, Pressure switches, proximity and
position sensors. Encoders, resolvers, synchros. Vision systems; Components of
vision systems, image, camera, image capturing systems. Processing systems Bar
coding and other identification systems. Controllers; Digital and analog control,
open and closed loop control, servosystems, servosystem analysis and response,
control configuration
UNIT III Logic Control and PLCs: Logic control, logic control elements,
Programmable logic controllers: Applications, architecture, operation, and
programming of PLCs. Typical applications.

UNIT IV Automated Material Handling Systems: Automated flowlines, transfer

mechanisms, conveyors, robots, Automated guided vehicles; categories, guiding
technologies and control. Automated Storage and Retrieval Systems, categories and
components.

UNIT V Automated Inspection Systems: In process gauging systems, Co-ordinate

measuring machines: Construction, operational modes and different probes.
Factory communication: interface standards, communication networks, LAN,
WAN, Protocols: OSI and MAP.

UNIT VI Flexible Manufacturing Systems: Types, components, architecture and control.

Computer integrated manufacturing.

Text Books:
1. Groover Mikell “Automated Production Systems, and Computer Integrate
Manufacturing” / PHI, 1992
2. Morriss, S. Brian, “Automated Manufacturing Systems”, Glanncoe Mcgra,
International Series, 1995.
 ME-410C MACHINE TOOL TECHNOLOGY (DSE- III)
B. Tech (Mechanical Engineering) VI Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory: 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: Machine Design
Successive: Project

Course Objectives:
Study of machine tools, its functions, installation of machine tools, principles of
machine tool design, installation of machine tools, testing of machine tools, repair and
maintenance of machine tools.

Course Outcome (COs): At the end of the course, the student shall be able to:

CO 1- Understand principles and applications of oxyacetylene and electric arc welding.

CO 2- Knowledge of various types of welds testing.
CO 3- Learns concept and techniques of welding automation.
CO 4- Analyse methods of advanced and special welding processes.
CO 5- familiarisation of computer system and software for welding engineers.

Syllabus:

UNIT I Principles of Machine Tool Design: Machine Tool and its functions,
classification of Machine Tools, elements of Machine Tools, Machine bed-
functions, material, cast v/s welded structures, slides and slideways- functions,
material, types, spindles and bearings- functions, materials, plain and roller bearing.
Types of drives for Machine Tools-mechanical, electrical, hydraulic and
pneumatic, stepped and stepless drives, system of change gears, sliding gears,
clutch drives, Norton gear, layout of spindle speeds, speed values in A.P. and G.P.,
Logrithmic Progressions, layout of gear boxes, variators, face plate and cone Type.

UNIT II Automatics: Introduction to automatics, basic concepts of automatic machine

tools, operating cycles, particular cycles of the operative numbers, cam controlled
automatics, cam and their types, cam layout, automatic lathes- Introduction, work
 feeding, tool feeding, classification of automatic lathes, single spindle chucking
automatics, automatic screw machines, automatic work feeding devices

UNIT III Pneumatics and Hydraulics in Machine Tools: Hydraulic system, gear
pump, variable delivery vane pump, plunger pump, principles of operation of single
and double acting cylinders, hydraulic motor, control valve and relay valve.
Pneumatic drives in machine tools, pneumatic control circuits and their response
analysis.

UNIT IV Installation of Machine Tools: Location, lifting and unloading of machines,

Equipments such as pulley blocks, Gantry, Derricks, Shear legs, Rollers and
pinch bars. Slinging of shaper, milling machine. Lathe, precaution in loading and
unloading. Foundation for machine tools. Types of Foundations, Foundation plans
for lathe and milling machines, Erection and Levelling, Grouting.

UNIT V Testing of Machine Tools: Factors affecting performance of machine tools,

Machine tool-workpiece-Fixture systems, Reasons for errors in machining.
Geometrical/Alignment Tests, Performance tests, Testing Equipments, Dial Gauges,
Mandrel, Spirit Level, Straight Edges, Auto Collimator, Test charts, Testing of
Lathes, Vertical Milling Machines, Radial Milling machines and Shaper,
Introduction to Modern Testing Equipments (DIGITAL/ ANALOGUES).

UNIT VI Repair and Maintenance of Machine Tools: Types of Maintenance, Break

Down and Preventive Maintenance, Organization of Maintenance Department,
Economic aspects of Preventive Maintenance, Restoration Techniques, Scraping,
Babbiting, Use of Plastic Compound, Weld Deposition, Metalising.

Text Books:
1. Principles of Machine Tools – G.C. Sen & A. Bhattacharya, Tata McGraw Hill, New
Delhi
2. Production Engineering by P.C. Sharma – S. Chand & Co
Reference Books:
1. Production Technology by R.K. Jain - Khanna Publishers
2. Industrial Maintenance by H.P. Garg – S. Chand and Company
 ME-412C ESTIMATION AND DESIGN OF RAC PLANTS (DSE - III)
B. Tech (Mechanical Engineering) VIII Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory: 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: Thermodynamics
Successive: None

Course Objectives:
To study various types of air-conditioning design and ducting. To study heat load estimation
and design for air-conditioning building. To study cold storage and ice making requirements
of system.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Understand the heat load estimation of air-conditioning system.
CO 2- Knowledge of general procedure of piping design in air-conditioning systems.
CO 3- Analyse cold storage system and ice making requirements of system.
CO 4- Learn air space ducting and duct design in air-conditioning system.
CO 5- Design and development refrigeration system
CO 6- Develop refrigeration system improvement.

Syllabus:

UNIT I Load Estimation: Building Survey and Heat Load Estimation, design conditions,
solar radiations, Heat Gain through Walls, Roofs and Glasses, Load from Partitions,
Ceilings and Floors, Load from outdoor Air, Ventilation and Infiltration, Effect of
outdoor Air on Load, Heat Sources within Conditioned Space, Miscellaneous Heat
Sources, Minimum entering Air Temperature, Load Estimating forms, Examples,
Cooling Load calculations of Restaurant, Office Building, Auditorium. Heat Load
calculation, Design Conditions, General Procedure Design for outdoor Weather
conditions, Transmission Heat Loss, Heat Load Estimation forms, Modification of
Cooling Load for Year Round Air Conditioning.
 UNIT II Space Air Distribution: Definition, Standard for satisfactory conditions,
Principles of Air Distribution, Blow, Drop, Spread, Induction, Types of Outlets,
Performance of Outlets, Outlet Location and Selection, Layout for Air Distribution,
Directional and Volume Control, Return and Exhaust Intakes, Air Distribution for
Refrigerated Space, Ventilation Requirement, Outside and Inside Design
Conditions.

UNIT III Air Duct Design: Pressure changes, Friction Losses, Continuity Equation,
Darcy Formula, Circular equivalent of Rectangular Ducts, Dynamic Loses, Pressure
Losses in Elbows and Divided flow, Losses due to Area changes, Duct designing
methods, Sizing Procedure, Equal Friction Method, Static Regain Method,
Construction details, Heat Losses from Ducts.

UNIT IV Piping Design: General Procedure for Piping Design, Refrigerant piping, Design
Considerations, Piping of Suction Line, Liquid Refrigerant Line, Discharge Line,
Steam and Water Piping Design.

UNIT V Automatic Ice Makers: Cube ice, Flaked and Compressed Ice, Machine
Performance, Characteristics of Clear Chip, Clear Cube, Clear Flake machines,
General idea of System Design, Water Treatment of Ice Making, Common Defects
of Ice and their Remedies.

UNIT VI Design of Cold Storage: Introduction, Causes of food spoilage, Factors

contributing to food spoilage, Control measure to be taken to prevent
spoilage of food, Cold Storage Practices, Effect of Low Temperature on Milk,
Eggs, Methods of Preservation, Slow Freezing, Quick Freezing, Effect of
Humidity, Storage Temperature, Relative Humidity and Air Motion,
Estimation of Load, Load Calculations, Number of Air Changes, Calculations
for Cold Storages, Capacity, Numericals.
Text Books:
1. Carrier HandBook for HVAC Engineers.
2. ISHRAE HandBook for HVAC Engineers
3. HVAC System Design Practices - McQuisten – John Wiley & Sons.
4. Refrigeration and AirConditioning- Manohar Prasad – New Age International.
5. Refrigeration and AirConditioning- C.P.Arora – TMH.
 ME-414C FLEXIBLE MANUFACTURING SYSTEM (DSE- IV)
B. Tech (Mechanical Engineering) VIII Semester

No. of Credits: 3 Sessional: 25 Marks

L T P Total Theory: 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 Hours

Pre- Requisite: Industrial Engineering, Manufacturing Technology and Automation

Successive: None

Course Objectives:
To understand the design, planning and operational concepts of FMS and learn about the
different tools and techniques for analyzing the same.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Understand FMS and job-shop and mass production manufacturing systems.
CO 2- Knowledge of concept and design of flexible manufacturing cells.
CO 3- Explore processing stations and material handling systems used in FMS
environments.
CO 4- Analyze the production management problems in planning, loading, scheduling,
tool management and breakdown in a typical FMS.
CO 5- Design and analyze FMS using analytical techniques.

Syllabus:

UNIT I Understanding of FMS: Evolution and classifications of Manufacturing Systems,

Definition, Objective and Need, Components, Merits, Demerits and
Applications of FMS.

UNIT II Flexible Manufacturing Cell: Part families, parts classification and coding, types
of classification and coding systems. Machine cell design: The composite part
concept, types of cell designs, determining the best machine arrangement.

UNIT III FMS Processing Stations: Machining Centers, Turning centers, CMM, Washing/
Deburring station, etc. Different Layouts and their Salient features.
UNIT IV Material Handling Systems: An introduction, Conveyor, AGV, ASRS, Robots,
etc. and their salient features.

UNIT V Management Technology: Tool Management, Configuration planning and routing,

Production Planning and Control, Scheduling and control, Computer Networks
and Control.

UNIT VI Design of FMS: Performance Evaluation, Analytical models of FMS, Case

studies: Typical FMS problems from researches papers.

Text Books:
1. Groover,M.P “Automation, Production Systems and Computer Integrated Manufacturing”,
Prentice Hall of India Pvt.Ltd. New Delhi 2009
Reference Books:
1. Tempelmeier.H and Kuhn.H. “Flexible Manufacturing system: Decision support for design
and operation”, John Wiley and Sons 2003.
2. Maleki A. “Flexible Manufacturing Systems: the technology and management”. Prentice
Hall International –2009
 ME-416C PROJECT MANAGEMENT (DSE - IV)
B.Tech (Mechanical Engineering) VIII Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory : 75 Marks
300 3 Total : 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: Operation Research
Successive: None

Course Objectives:
To develop project within time, resource & budget, types of projects, project life cycle and
decisions. To align project execution with strategies. To identify project issues clearly and
come up with new solutions.

Course Outcomes (COs): At the end of the course, the student shall be able to:

CO 1- Illustrate the types of projects and project appraisal & selection.

CO 2- Describe and develop project network.
CO 3- Knowledge of the role of human factors in a project.
CO 4- Develop and solve Project evaluation & review technique (PERT) & Critical path
method (CPM).
CO 5- Analyze how to control & monitor a project.

Syllabus:
UNIT I Introduction & Overview: Definitions, Types of projects, Project life cycle
(Project phases) and decisions.

UNIT II Go/ No go decisions based on: a) Project Identification and Screening, b) Project
Appraisal: Market, Technical, social, Ecological & Financial, c) Project Selection:
Pragmatic, pair wise, MADM approach.

UNIT III Development of Project Network: Project description, Work break down
structure, Nomenclature, Rules for drawing and representation, consistency and
Redundancy in Project Networks, Matrix representation, Basic Scheduling with
Networks (Forward & Backward Pass)

UNIT IV CPM & PERT: Activity times, Completion, Floats, Probability (ND usage),
Examples, and Problems.
UNIT V Project Monitoring & Control: Project adjustments, Crashing: Direct & Indirect
cost, Normal & Crash: duration & cost, Resource leveling: Types, usage, leveling,
Problems, Managing Risk.

UNIT VI Role of Human Factors and Project completion: Dealing with people Team
Building and Leadership in Projects, commitment, work culture, motivation,
coordination, attitude, innovation. Project Completion, Review and Future
Directions
Text Books:
1. Project Management: A Life Cycle Approach by Arun Kanda. (PHI Learning)
2. Project Management: Engineering, Technology, and Implementation by Shtub, Bard
and Globerson,, PH Inc.
Reference Books:
1. Project Management by Clifford Gray and Erik Larson. (Tata McGraw Hill Edition)
2. Management Guide to PERT/ CPM by Wiest, JD and Levy F.K. (PHI)
3. Industrial Engg. & Mgmt. by Dr Ravi Shankar. Galgotia Publications.
Web Links:
1. https://en.wikipedia.org/wiki/Project_management
2. http://freevideolectures.com/Course/2371/Project-and-Production-Management/2
3. https://www.youtube.com/watch?v=DdDzybQ_9vM
 ME-418C TRIBOLOGY (DSE - IV)
B. Tech (Mechanical Engineering) VIII Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory : 75 Marks
3003 Total : 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: Fluid Mechanics
Successive: None

Course Objectives:
The main objective of this course is to study the concepts of friction and wear and to
minimize their effects by lubrication on different surfaces.

Course Outcomes (COs): After studying this course the student will be able to:
CO- 1 Illustration of concept of surfaces & friction.
CO 2- Understand about the concept of wear of materials.
CO 3- Cocepulisation of lubrication & its types.
CO 4- Understand about the Film Lubrication Theory
CO 5- Learning of Surface Engineering and Materials for Bearings.

Syllabus:

UNIT I Surfaces and Friction: Topography of Engineering surfaces- Contact between

surfaces - Sources of sliding Friction -Adhesion Ploughint- Energy dissipation
mechanisms, Friction Characteristics of metals - Friction of non-metals. Friction
of lamellar solids - friction of Ceramic materials and polymers - Rolling Friction.
Source of Rolling Friction - Stick slip motion - Measurement of Friction.

UNIT II Wear- Types of wear: Simple theory of Sliding Wear Mechanism of sliding wear
of metals - Abrasive wear. Materials for Adhesive and Abrasive wear situations -
Corrosive wear - Surface Fatigue wear situations - Brittle Fracture wear - Wear of
Ceramics and Polymers - Wear Measurements.

UNIT III Lubricants and Lubrication Types: Types and properties of Lubricants -
Testing methods - Hydrodynamic Lubrication – Elasto hydrodynamic lubrication-
Boundary Lubrication - Solid Lubrication Hydrostatic Lubrication.
UNIT IV Film Lubrication Theory: Fluid film in simple shear - Viscous flow between
very close parallel plates - Shear stress variation, Reynolds Equation for film
Lubrication - High speed unloaded journal bearings - Loaded journal bearings -
Reaction torque on the bearings -Virtual Coefficient of friction - The Somerfield
diagram.

UNIT V Surface Engineering and Materials for Bearings: Surface modifications -

Transformation Hardening, surface fusion - Thermo chemical processes - Surface
coatings - 103 Plating and anodizing Fusion Processes - Vapour Phase processes -
Materials for rolling Element bearings - Materials for fluid film bearings -
Materials for marginally lubricated and dry bearings.

Text/Reference Books:
1. I.M. Hutchings, Tribology, Friction and Wear of Engineering Material, Edward Arnold
2. T.A. Stolarski, Tribology in Machine Design , Industrial Press Inc
3. E. P.Bowden and Tabor.D., Friction and Lubrication , Heinemann Educational Books Ltd
4. A. Cameron, Basic Lubrication theory , Longman, U.K.., 1981.
5. M. J.Neale (Editor), Tribology Handbook, Newnes. Butter worth, Heinemann, U.K
 ME-420C AIR- CONDITIONING EQUIPMENTS (DSE - IV)
B.Tech (Mechanical Engineering) VIII Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory: 75 Marks
3 0 0 3 Total: 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: Thermodynamics, Refrigeration and Air Conditioning
Successive: None

Course Objectives:
To study and understand the concept of different equipments used in Refrigeration & Air
Conditioning Systems and their working.

Course Outcomes (COs): At the end of the course, the student shall be able to:

CO 1- Understand the construction and working principles of different type of filters,

Humidifiers and dehumidifiers and their need.
CO 2- Learning working of condenser and cooling tower used in RAC system.
CO 3- Concepts of Evaporators.
CO 4- Application of compressors used in RAC systems.
CO 5- Utilisation of fans and pumps used in RAC systems.
CO 6- Understand working of Expansion devices and electric motors used in RAC systems.

Syllabus:

UNIT I Filters: Air Cleaning, Air Filters, Methods of Air Cleaning, Different types of Air
Filters, Selection of Air Filters, Performance of air Filters, Odour Removal,
Humidifiers: Need of Humidifiers, Methods of Humidification, Various types of
Humidifiers, Dehumidifiers: Need of Dehumidifiers, Methods of Dehumidification
and Various types of Dehumidifiers.

UNIT II Condensers and Cooling Towers: Types of Cooling Medium and their Selection,
Air and Water cooled Condensers, Economic Operation of Condenser, Different
Types of Water Cooled Condensers, Spray Ponds, Cooling Towers, Natural,
Forced and Induced Draft Cooling Towers, Design Analysis of Cooling Towers,
Performance Analysis of Condensers and Cooling Towers.
UNIT III Evaporators: Factors Considered for Design of Evaporators, Evaporator Types:
Flooded and Dry Evaporators, Natural and Forced Convection, Shell and Tube,
Shell and Coil, Plate type and Secondary Evaporators. Application of Fins,
Temperature distribution and Heat flow in Evaporator, Pressure drop, Fouling
correction factor, Selection of Evaporators.

UNIT IV Compressors: Reciprocating, Rotary, Scroll, Centrifugal, Screw and Thermo-

Compressor Compressors (Excluding the Analysis), Factors Affecting the
Performance of Reciprocating Compressor, Capacity Control of Compressors,
Compressors for Eco-friendly Refrigerants, Variable Drive Compressor and Future
Trends in Refrigeration Compressors and Selection of Compressors, Inverter based
technology and variable refrigerant flow system.

UNIT V Fans: Types, Axial Flow Fans, Centrifugal Fans, Total Pressure Developed by
Fan, Fan air power and Efficiencies, Problems, Pumps: Types, Reciprocating, Gear
or Rotary and Centrifugal Pumps, , Selection of Fans and Pumps.

UNIT VI Expansion Devices: Capillary tube, Automatic Expansion, Thermostatic

Expansion, High-Side float, Low-Side Float and Solenoid Control Valves,
Electronic expansion valve, Introduction to Electric Motors and their Applications,
Variable speed motors, variable frequency drive for motors, Introduction to Motor
Starting Relays and Motor Overload Protector.

Text Books:
1. Refrigeration and Air Conditioning by C.P. Arora – TMH.
2. Refrigeration and Air Conditioning by S.C.Domkundwar – Dhanpat Rai & Sons
3. Refrigeration and Air Conditioning by D.S. Kumar- Kataria and Sons

Reference Books:
1. Carrier Hand Book for HVAC Engineers.
 ME-422C NON-CONVENTIONAL ENERGY RESOURCES AND UTILISATION
(DSE- IV )
B. Tech (Mechanical Engineering) VIII Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory : 75 Marks
3003 Total : 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: Thermodynamics
Successive: None
Course Objectives:
To study energy resources, energy planning and their utilization. To study various non-
conventional energy sources such as bio-gas, solar energy and its utilization, wind energy,
etc. To study operating characteristics of fuel cells and tidal energy.

Course Outcomes (COs): At the end of the course, the student shall be able to:

CO 1- Understand about the types of energy resources and energy requirement.

CO 2- Complete understanding about production and utility of bio-gas and wind
energy.
CO 3- Knowledge of the utility of solar energy.
CO 4- Familiarization of the project evaluation & review technique (PERT) &
critical path method (CPM).
CO 5- Understanding tidal and wave energy as alternate resource.
Syllabus:

UNIT I Energy Resources and their Utilization : Indian and global energy sources,
Energy exploited, Energy planning, Energy parameters (energy intensity, energy-
GDP elasticity), Introduction to various sources of energy, Solar thermal,
Photovoltaic, Water power, Wind energy, Biomass, Ocean thermal, Tidal and
wave energy, Geothermal energy, Hydrogen energy systems, Fuel cells,
Decentralized and dispersed generation. Economics. Impact of renewable energy
generation on environment, Kyoto Protocol, Cost of electricity production from
different energy sources, Energy options for Indian economy.

Solar Radiations: Extra terrestrial radiation, Spectral distribution, Solar constant,

Solar radiations on earth, Measurement of solar radiations, Solar radiation
geometry, Flux on a plane surface, Latitude, Declination angle, Surface azimuth
 angle, Hour angle, Zenith angle, Solar altitude angle expression for angle between
incident beam and the normal to a plane surface (no derivation), Local apparent
time, Apparent motion of sun, Day length, Solar radiation data for India.

UNIT II Solar Energy: Solar thermal power and it's conversion, Solar collectors, Flat plate,
Performance analysis of flat plate collector, Solar concentrating collectors, Types
of concentrating collectors, Thermodynamic limits to concentration, Cylindrical
collectors, Thermal analysis of solar collectors, Tracking CPC and solar swing.
Solar thermal energy storage, Different systems, Solar pond. Applications, Water
heating, Space heating & cooling, Solar distillation, Solar pumping, Solar
cooking, Greenhouses, Solar power plants.
Solar photovoltaic system: Photovoltaic effect, Efficiency of solar cells,
Semiconductor materials for solar cells, Solar photovoltaic system, Standards of
solar photovoltaic system, Applications of PV system, PV hybrid system.

UNIT III Biogas: Photosynthesis, Bio gas production, Aerobic and anaerobic bio-
conversion process, Raw materials, Properties of bio gas, Producer gas,
Transportation of bio gas, bio gas plant technology & status, Community biogas
plants, Problems involved in bio gas production, Bio gas applications, Biomass
conversion techniques, Biomass gasification, Energy recovery from urban waste,
Power generation from liquid waste, Biomass cogeneration, Energy plantation,
Fuel properties, Biomass resource development in India.

UNIT IV Wind Energy: Properties of wind, Availability of wind energy in India, wind
velocity, Wind machine fundamentals, Types of wind machines and their
characteristics, Horizontal and Vertical axis wind mills, Elementary design
principles, Coefficient of performance of a wind mill rotor, Aerodynamic
considerations in wind mill design, Selection of a wind mill, Wind energy farms,
Economic issues, Recent development.

UNIT V Tidal Power: Tides and waves as sources of energy, Fundamentals of tidal power,
Use of tidal energy, Limitations of tidal energy conversion systems.
Hydrogen Energy: Properties of hydrogen in respect of its use as source of
renewable energy, Sources of hydrogen, Production of hydrogen, Storage and
transportation, Problems with hydrogen as fuel, Development of hydrogen
cartridge, Economics of hydrogen fuel and its use.
UNIT VI Thermoelectric Systems: Kelvin relations, power generation, Properties of
thermoelectric materials, Fusion Plasma generators.
Geothermal energy: Structure of earth's interior, Geothermal sites, earthquakes &
volcanoes, Geothermal resources, Hot springs, Steam ejection, Principal of
working, Types of geothermal station with schematic representation, Site
selection for geothermal power plants. Advanced concepts, Problems associated
with geothermal conversion.
Ocean Energy: Principle of ocean thermal energy conversion, Wave energy
conversion machines, Power plants based on ocean energy, Problems associated
with ocean thermal energy conversion systems, Thermoelectric OTEC,
Developments of OTEC,

Reference Books:
1. Bansal Keemann, Meliss,” Renewable energy sources and conversion
technology", Tata McGraw Hill.
2. Kothari D.P., “Renewable energy resources and emerging technologies",
Prentice Hall of India Pvt. Ltd.
3. Ashok V. Desai, "Non conventional Energy", New Age International
Publishers Ltd.
 ME-424C MICRO AND NANO MANUFACTURING (DSE- V)
B. Tech (Mechanical Engineering) VIII Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory: 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: Material Science, Physics
Successive: None
Course Objectives:
The objective of this course is to familiarize the students with the processes and techniques of
micro and nano manufacturing.

Course Outcomes (COs): At the end of the course, the student shall be able to:

CO 1- Understand manufacturing considerations at the micro and nano scale.

CO 2- Understand design-and-analysis methods and tools used for micro and nano
manufacturing.
CO 3- Select manufacturing methods, techniques and process parameters for material
processing quality.
CO 4- Design and select industrially-viable processes, equipment and manufacturing
tools for specific industrial products.
Syllabus:

UNIT I Introduction: Importance of Nano-technology, Emergence of Nanotechnology,

Bottom-up and Top-down approaches, challenges in Nanotechnology.
Nano materials Synthesis and Processing: Methods for creating Nanostructures;
Processes for producing ultrafine powders- Mechanical grinding; Wet Chemical
Synthesis of nanomaterials- solgel process, Liquid solid reactions; Gas Phase
synthesis of nanomaterials- Furnace, Flame assisted ultrasonic spray pyrolysis; Gas
Condensation Processing(GPC), Chemical Vapour Condensation(CVC)- Cold
Plasma Methods, Laser ablation, Vapour – liquid –solid growth, particle
precipitation aided CVD, summary of Gas Condensation Processing(GPC).

UNIT II Structural Characterization: X-ray diffraction, Small angle X-ray Scattering,

Optical Microscope and their description, Scanning Electron Microscopy (SEM),
Scanning Probe Microscopy (SPM), TEM and EDAX analysis, Scanning
Tunneling Microscopy (STM), Atomic force Microscopy (AFM).
 Spectroscopic characterizations: Basic concepts of spectroscopy, operational
principle and application for analysis of nanomaterials, UV-VIS-IR
Spectrophotometers, Principle of operation and application for band gap
measurement, Raman spectroscopy.

UNIT III Surface Characterization: X-ray Photoelectron Spectroscopy (XPS), Auger

electron spectroscopy, Low Energy Ion Scattering Spectroscopy (LEISS),
Secondary Ion Mass Spectroscopy (SIMS), Rutherford Backscattering
Spectroscopy (RBS).
Thermal Characterization of Nanomaterials: DTA, TGA, DSC (Principle and
Applications), Determination of thermo physical parameters.

UNIT IV Microfabrication Techniques: Lithography, Thin Film Deposition and Doping,

Etching and Substrate Removal, Substrate Bonding. MEMS Fabrication
Techniques, Bulk Micromachining, Surface Micromachining, High- Aspect-Ratio
Micromachining.

UNIT V Nanofabrication Techniques: E-Beam and Nano-Imprint Fabrication, Epitaxy and

Strain Engineering, Scanned Probe Techniques, Self-Assembly and Template
Manufacturing.

UNIT VI MEMS Devices and Applications: Pressure sensor, Inertial sensor, Optical
MEMS and RF-MEMS, Micro-actuators for dual-stage servo systems.

Text Books:
1. Mark James Jackson, Microfabrication and Nanomanufacturing, CRC Press, 2005.
2. Gabor L. Hornyak, H.F Tibbals, Joydeep Dutta & John J Moore, Introduction to
Nanoscience and Nanotechnology, CRC Press, 2009.
Reference Books:
1. Ray F. Egerton , Physical Principles of Electron Microscopy: An Introduction to TEM,
SEM, and AEM , Springer, 2005.
2. Robert F Speyer, Thermal Analysis of Materials, Marcel Dekker Inc, New York, 1994.
3. B.D. Cullity - Elements of X-Ray Diffraction, 3rd edition, Prentice Hall , 2002.
 ME-426C QUALITY MANAGEMENT (DSE - V)
B.Tech (Mechanical Engineering) VIII Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory: 75 Marks
3 0 0 3 Total: 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: Industrial Engineering
Successive: None

Course Objectives:
To understand the concept of Quality Management, Quality related tools and techniques and
their use as per industry standards.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Understand the issues and dimensions related to quality management
CO 2- Use of different tools and techniques used for quality management
CO 3- Analyze the sampling process and plans
CO 4- Knowledge of the aspects of quality of national and international bodies.

Syllabus:

UNIT I Introduction: Evolution of Quality Management, Philosophy, Concepts of Product

and Service Quality, Dimensions of Quality, Quality Guru’s, Quality Awards,
Quality Cost.

UNIT II Quality Assurance: Inspection, Quality control, Quality assurance, Concept and
Advantage of quality assurance, Quality rating, Quality survey/audit, Vendor
rating, Quality function deployment.

UNIT III Process Quality Improvement: Introduction to Process Quality, Graphical and
statistical techniques for Process Quality Improvement, Graphical tools for data
representation, 7QC tools, Process capability analysis, Measurement system
analysis.

UNIT IV Acceptance Sampling: Concept of acceptance sampling, advantage and

limitations of sampling inspection, Sampling methods, Operating characteristics
curve, producer and consumer risk, Average outgoing quality limits, sampling
plans, sampling plans for variables, Problems.
UNIT V Control Charts: Chance and assignable causes of process variation, statistical
basis of the control chart, control charts for variables - x̅ and R charts, attribute
control charts - p, np, c and u- Construction and application, Problems.

UNIT VI Contemporary Trends in Quality Engineering & Management: Introduction

to Quality Management Standards – ISO : 9000, ISO:14000, Reliability, Quality
circles, Concept of Six sigma, Basic steps involve in six sigma, National and
International bodies for quality aspects, Introduction to Japanese’s quality
techniques such as 5S, Kaizen, SMED, TQM,TPM.

Text Books:
1. Quality Management by Kanishka Bedi, Pearson Education
2. Stastical Quality control by Grant and Leavenworth, Tata Mcgraw Hill
Reference Books:
1. Quality Assurance and Total Quality Management (ISO 9000, QS 9000 ISO 14000)
by K C Jain and A K Chitale, Khanna Publishers
2. Quality Control & Application by B. L. Hanson & P. M. Ghare, Prentice Hall of
India
3. Total Quality Management by Dale H. Besterfield, Carol Besterfield-Michna, Glen
H. Besterfield and Mary Besterfield-Sacre, Pearson Educaiton
4. Statistical Quality Control by M. Mahajan, Dhanpat Rai & Co. (P) Ltd.
Web links:
1. https://www.spseplzen.cz/comenius/uality%20management%20system%20II.ppt
2. www.powershow.com/.../ISO_9001_quality_management_system_guide_powerp
oint...
3. nptel.ac.in/courses/110101010/
 ME-428C DESIGN AND OPTIMIZATION (DSE - V)
B.Tech (Mechanical Engineering) VIII Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory: 75 Marks
3 0 0 3 Total: 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: Operation Research
Successive: None
Course Objectives:
The main objective of this course is to introduce the optimisation of design techniques.

Course Outcomes (COs): At the end of this course the student shall be able to:
CO 1- Introduction to design optimization
CO 2- Illustration of different approaches for optimization.
CO 3- Understand about the application optimization in mechanical design.
CO 4- Learning of different optimization techniques.
CO 5- Knowledge of different practical applications of optimization with respect to
functionality, asthetics, economics & materials.

Syllabus:

UNIT I Introduction to Optimum design: Introduction to detail design optimization by

simulation, prototyping and optimum. Selection of configuration, materials and
processes.

UNIT II Optimization Approach: Classical mathematical methods of optimization.

Mechanical System Design problem-economic political environment, issues of
human safety & welfare, and professional ethics. Optimum mechanical design
concepts.

UNIT III Overview and application of optimization methods to machine elements and
mechanical system design. Prototyping, simulation, and use of standards for detail
design optimization.

UNIT IV Optimization Techniques: Optimum selection of material & processes in

mechanical design using material selection charts and optimization methods.
UNIT V Applications: Optimizing product design functionality, aesthetics and economics
by employing industrial design principles and by suitable selection of material &
processing including use of polymers, composites and other non-metallic materials.

Text/Reference Books:

1. H. Adeli. Advances in Design Optimization.

2. Robert F. RHYDER, Manufacturing Process Design and Optimization, New York: Marcel
Dekker,
3. S.S.Rao, Optimization: Theory & Application Wiley Eastern
4. K. Deb, Optimization for Engineering Design, Prentice Hall India
5. J.S.Arora, Introduction to Optimum Design, McGraw Hill
 ME-430C POWER PLANT ENGINEERING (DSE IV)
B. Tech (Mechanical Engineering) VIII Semester

No. of Credits: 3 Sessional: 25 Marks

L T P Total Theory: 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 Hours

Pre- Requisite: Thermodynamics, Applied Thermodynamics, Fluid Machines

Successive: None

Course Objectives:
To study various essential concepts of conventional and unconventional power plants. To
study nuclear power plants and non-conventional power plant. To study pollution emission
and their effect on environment.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO 1- Understand the principles of steam power plants and gas power plants.
CO 2- Utility and applications of nuclear power plant.
CO 3- Installation and commissioning of hydro-electric power plants.
CO 4- Knowledge of various factors affecting non-conventional power plant.
CO 5- Learn about different types of power plants
CO 6- Analyse pollution emission and their effect on environment

Syllabus:
UNIT I Introduction: Energy resources and their availability, types of power plants,
selection of the plants, review of basic thermodynamic cycles used in power plants.

UNIT II Hydro Electric Power Plants : Rainfall and run-off measurements and plotting of
various curves for estimating stream flow and size of reservoir, power plants
design, construction and operation of different components of hydro-electric power
plants, site selection, comparison with other types of power plants.

UNIT III Steam Power Plants: Flow sheet and working of modern-thermal power plants,
super critical pressure steam stations, site selection, coal storage, preparation, coal
handling systems, feeding and burning of pulverized fuel, ash handling systems,
dust collection-mechanical dust collector and electrostatic precipitator.
UNIT IV Combined Cycles: Constant pressure gas turbine power plants, Arrangements of
combined plants ( steam & gas turbine power plants ), re-powering systems with gas
production from coal, using PFBC systems, with organic fluids, parameters
affecting thermodynamic efficiency of combined cycles. Problems.

UNIT V Nuclear Power Plants: Principles of nuclear energy, basic nuclear reactions,
nuclear reactors-PWR, BWR, CANDU, Sodium graphite, fast breeder,
homogeneous; gas cooled. Advantages and limitations, nuclear power station,
waste disposal.

UNIT VI Power Plant Economics: load curve, different terms and definitions, cost of
electrical energy, tariffs methods of electrical energy, performance & operating
characteristics of power plants- incremental rate theory, input-out put curves,
efficiency, heat rate, economic load sharing, Problems.

UNIT VII Non-Conventional Power Generation: Solar radiation estimation, solar

energy collectors, low, medium & high temperature power plants, OTEC, wind
power plants, tidal power plants, geothermal power plants.

UNIT VIII Direct Energy Conversion Systems: Fuel cell, MHD power generation-
principle, open & closed cycles systems, thermoelectric power generation,
thermionic power generation.

Text Books:

1. Power station Engineering and Economy by Bernhardt G.A. skrotzki and William A.
Vopat – Tata Mc Graw Hill Publishing Campany Ltd., New Delhi
2. Power Plant Engineering: P.K. Nag Tata McGraw Hill second Edition 2001
 ME-432C ADVANCE MANUFACTURING PROCESSES (DSE- V)
B. Tech (Mechanical Engineering) VIII Semester
No. of Credits: 3 Sessional: 25 Marks
L T P Total Theory: 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 Hours
Pre- Requisite: Thermodynamics
Successive: None

Course Objectives:
The main objective of this course is to get knowledge about non traditional machining
process and understand theory involved material removal mechanism.

Course Outcomes (COs): At the end of the course, the student shall be able to:
CO1- Acquire knowledge about non traditional machining process.
CO 2- Study the different process parameters and differentiate between various non
traditional machining processes.
CO3- Identify suitable non traditional machining process.
CO4- Understand various material removal mechanisms.

Syllabus:
UNIT I Material Removal Processes: Introduction, history of machining, traditional
machining processes, non traditional machining processes, hybrid machining
processes. need for non-traditional machining processes.

UNIT II Mechanical Processes: Ultrasonic machining - Introduction, the machining

system, material removal process, factors affecting material removal rate,
dimensional accuracy and surface quality, applications. Water jet machining -
Introduction, The machining system, Process parameters, Applications,
Advantages and disadvantages of WJM, Abrasive Jet Machining - Introduction,
Machining system, Material removal rate, Applications, Advantages and
limitations of AJM.

UNIT III Chemical Processes: Chemical Milling - Introduction, Tooling for CHM, Process
parameters, Material removal rate, Accuracy and surface finish, Advantages,
Limitations, Applications Photochemical Milling - Introduction, Process
 description Applications, Advantages Electro Polishing - Introduction, Process
parameters, Applications, Process limitations.

UNIT IV Electrochemical Processes: Electro Chemical Machining: Introduction, Principles

of electrolysis, Theory of ECM, ECM equipment, Basic working principles,
Process characteristics, Process control, Applications Basics of Electrochemical
Drilling, Electro-Chemical Deburring, and Electro stream drilling.

UNIT V Hybrid Electrochemical Processes: Electro Chemical Grinding - Introduction,

Material removal rate, Accuracy and surface quality, Applications, Advantages and
disadvantages Electrochemical Honing - Introduction, Process characteristics,
Applications Electrochemical Super Finishing - Introduction, Material removal
process, Process accuracy Electrochemical Buffing - Introduction, Material
removal process.

UNIT VI Thermal Processes: Introduction, Mechanism of material removal, The

machining system, Material removal rates, Heat-affected zone, Applications. Wire
EDM/Surface EDM principle, Process parameters, surface finish and machining
accuracy, applications. Laser beam machining - Introduction, material removal
mechanism, applications, advantages and limitations. Electron beam machining -
introduction, basic equipment and removal mechanism, applications, advantages
and disadvantages. Plasma beam machining - introduction, machining systems,
material removal rate, accuracy and surface quality, applications, advantages and
disadvantages. Ion beam machining - introduction, material removal rate, accuracy
and surface effects, applications.

Text Books:
1. Pandey P.C. and Shah H.S, “Modern Machining Processes”, TMH.
2 El-Hofy, Hassan Abdel-Gawad, “Advanced Machining Processes: Non traditional and
Hybrid Machining Processes”, McGraw-Hill.
References:
1. Bhattacharya A, “New Technology, the Institution of Engineers”, India
2. V. K. Jain, “Advanced Machining Processes”, Allied Publishers.
The Syllabus for General Elective Courses offered by CE and IT Department:

GC-101C INTELLIGENT SYSTEMS

No. of Credits: 3 Sessional: 25 Marks

L T P Total Theory: 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 Hours

UNIT I Fundamental Issues in IS : Definition of AI , History ,Domains AI ,AI problems &

State space ,Some examples problems representations like Travelling Salespersons,
Syntax analysis Problem. Basic issues to solve AI problems, Underlying
assumptions, AI techniques, Level of model ,Criteria for success , Control strategies,
DFS, BFS

UNIT II Heuristic Search Techniques: Generate & Test, Hill Climbing (simple & stipest),
Best first search, A*, AO*, Constraint Satisfaction.

UNIT III Knowledge Representation Issues: Syntax & Semantic for Propositional logic,
Syntax & Semantic for FOPL, Properties for WFF’s, Resolution Basics : conversion
to clausal form ,Resolution of proposition logic, Resolution algorithms for
predicates, Problems with FOPL ,Semantic nets ,Frames ,Scripts

UNIT IV Reasoning Under Uncertainty: An introduction, Default reasoning & Closed

world assumptions, Model & Temporal logic ,Fuzzy logic, Basian
Probabilistic inference Dempster Shafer theory ,Heuristic reasoning methods

UNIT V Planning & Learning : Planning, Planning in Situational calculus ,Representation

for planning ,Partial order palnning, Partial order palnning algorithm, Learning by
Examples, Learning by Analogy, Explanation based learning, Neurals nets, Genetics
algorithms

UNIT VI Minimax: Game playing strategy, Natural language processing ,Overview of

linguistics , Grammer & Language, Transformation Grammer, Basic Parsing
Techniques, Expert System, Architecture of Rule based Expert system ,Non Rule
based Expert system.

References:
1. Artificial Intelligence by Elain Rich & Kevin Knight, Tata McGraw Hills Pub.
2. Principals of AI by Nills .J.Nilsson, Pearson Education Pub.
3. Artificial Intelligence by DAN. W.Petterson. Printice Hall of India
4. Artificial Intelligence by Petrick Henry Winston,
5. Artificial Intelligence by Russel and Norvig, Pearson Education Pub.
 GC 102C CYBER LAWS AND SECURITY

No. of Credits: 3 Sessional: 25 Marks

L T P Total Theory: 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 Hours

UNIT I History of Information Systems and its Importance, basics, Changing Nature of
Information Systems, Need of Distributed Information Systems, Role of Internet and
Web Services, Information System Threats and attacks, Classification of Threats and
Assessing Damages Security in Mobile and Wireless Computing- Security Challenges
in Mobile Devices, authentication Service Security, Security Implication for
organizations, Laptops Security Basic Principles of Information Security,
Confidentiality, Integrity Availability and other terms in Information Security,
Information Classification and their Roles.

UNIT II Security Threats to E Commerce, Virtual Organization, Business Transactions on

Web, E Governance and EDI, Concepts in Electronics payment systems, E Cash,
Credit/Debit Cards. Physical Security- Needs, Disaster and Controls, Basic Tenets of
Physical Security and Physical Entry Controls, Access Control- Biometrics, Factors in
Biometrics Systems, Benefits, Criteria for selection of biometrics, Design Issues in
Biometric Systems, Interoperability Issues, Economic and Social Aspects, Legal
Challenges

UNIT III Model of Cryptographic Systems, Issues in Documents Security, System of Keys,
Public Key Cryptography, Digital Signature, Requirement of Digital Signature
System, Finger Prints, Firewalls, Design and Implementation Issues, Policies
Network Security- Basic Concepts, Dimensions, Perimeter for Network
Protection, Network Attacks, Need of Intrusion Monitoring and Detection, Intrusion
Detection Virtual Private Networks- Need, Use of Tunneling with VPN,
Authentication Mechanisms, Types of VPNs and their Usage, Security Concerns in
VPN

UNIT IV Security metrics- Classification and their benefits Information Security & Law,
IPR, Patent Law, Copyright Law, Legal Issues in Data mIning Security, Building
Security into Software Life Cycle Ethics- Ethical Issues, Issues in Data and
Software Privacy Cyber Crime Types & overview of Cyber Crimes
References:
1. Godbole,“ Information Systems Security”, Willey
2. Merkov, Breithaupt, “ Information Security”, Pearson Education
3. Yadav, “Foundations of Information Technology”, New Age, Delhi
4. Schou, Shoemaker, “ Information Assurance for the Enterprise”, Tata McGraw Hill
5. Sood,“Cyber Laws Simplified”, Mc Graw Hill
6. Furnell, “Computer Insecurity”, Springer 7. IT Act 2000
 GC- 103C SOFT COMPUTING

No. of Credits: 3 Sessional: 25 Marks

L T P Total Theory: 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 Hours

UNIT I Neural Networks: History, overview of biological Neuro-system, Mathematical

Models of Neurons, ANN architecture, Learning rules, Learning Paradigms-
Supervised, Unsupervised and reinforcement Learning, ANN training Algorithms-
perceptions, Training rules, Delta, Back Propagation Algorithm, Multilayer
Perception Model, Hopfield Networks, Associative Memories, Applications of
Artificial Neural Networks.

UNIT II Fuzzy Logic: Introduction to Fuzzy Logic, Classical and Fuzzy Sets: Overview of
Classical Sets, Membership Function, Fuzzy rule generation.

UNIT III Operations on Fuzzy Sets: Compliment, Intersections, Unions, Combinations of

Operations, Aggregation Operations.

UNIT IV Fuzzy Arithmetic: Fuzzy Numbers, Linguistic Variables, Arithmetic Operations

on Intervals & Numbers, Lattice of Fuzzy Numbers, Fuzzy Equations.

UNIT V Fuzzy Logic: Classical Logic, Multivalued Logics, Fuzzy Propositions, Fuzzy
Qualifiers, Linguistic Hedges. Uncertainty based Information: Information &
Uncertainty, Nonspecificity of Fuzzy & Crisp Sets, Fuzziness of Fuzzy Sets. Genetic
Algorithms, Scope & application areas, solution of 0-1Knapsack problem using GA

References:

1. “Fuzzy sets and Fuzzy Logic: Theory and applications”,G.J. Klir,B.Yuan, PHI

2. “Introduction to Fuzzy sets and Fuzzy Logic”, M.Ganesh , PHI

3. “An Introduction to Fuzzy Control”, D Driankov, H Hellendoorn, M Reinfrank,

Narosa Publishing Company

4. “ Neural Networks: A classroom approach”, Satish Kumar , Tata McGraw Hill

5. Haykin S., “Neural Networks-A Comprehensive Foundations”, Prentice-Hall

International, New Jersey, 1999.

 GC-104C WEB TECHNOLOGY AND INFORMATION RETRIEVAL

No. of Credits: 3 Sessional: 25 Marks

L T P Total Theory: 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 Hours

UNIT I Web Server Technology: Web’s Robot global access to information, HTML,
HTTP, Accessing a web server, publishing on web server, secure HTTP,
Secure Sockets Layer, WWW Proxies, IIS, Case study of apache web server.

UNIT II Web Search Basics: Background and history, Anatomy of WWW, Web
characteristics, Spam, The web graph, The Web Search Users, search engines,
architecture of search engines, search tools, DNS resolution, The URL
frontier, Link analysis, Page Rank.

UNIT III Web Crawlers: Basics of Web crawling, Various crawling techniques,
incremental crawler, parallel crawler, distributed crawlers, focused crawler, agent
based crawler, Hidden web Crawler

UNIT IV Introduction to Information Retrieval: Information retrieval problem, an

inverted index, Processing Boolean queries, The extended Boolean model
versus ranked retrieval, an inverted index, Bi-word indexes, Positional indexes,
Combination schemes

UNIT V Index Construction: Hardware basics, Blocked sort-based indexing, Single-pass

in-memory indexing, Distributed indexing, Dynamic indexing, Other types of
indexes Index compression: Statistical properties of terms in information retrieval,
Heaps’ law: Estimating the number of terms, Zipf’s law: Modeling the
distribution of terms, Dictionary compression, Dictionary as a string, Blocked
storage, Postings file compression.
 GC-105C INTELLECTUAL PROPERTY RIGHTS

No. of Credits: 3 Sessional: 25 Marks

L T P Total Theory: 75 Marks
3 0 0 3 Total : 100 Marks
Duration of Exam: 3 Hours

UNIT I Introduction to Intellectual Property: Concept of Intellectual Property, Kinds of

Intellectual Property, Economic Importance of Intellectual Property, Indian Theory
on Private Property: Constitutional Aspects of Property, Constitutional Protection
of Property and Intellectual Property, Economic Development and Intellectual
Property Rights Protection

UNIT II Introduction to Patents: Overview, Historical Development, Concepts: Novelty,

Utility, Patentable Subject-matter: Patent Act, 1970- Amendments of 1999, 2000,
2002 and 2005, Pharmaceutical Products and Process and Patent , Protection,
Software Patents, Business Method, Protection of Plant Varieties and Farmers’
Rights Act, 2001, Patenting of Micro-organism

UNIT III Procedure of Obtaining of Patents: Concepts of a Patent Application,,

Specification: Provisional, Complete, Disclosure Aspects, Claims: Principal,
Dependant, Omnibus, Examination of Application, Opposition of Application,
Sealing of Patents

UNIT IV Working of Patents – Compulsory License: Commercialization of Inventions:

License- Terms of License Agreement, Assignments of Patents, Revocation of
Patents

UNIT V Infringement: What is Infringement?, How is Infringement determined? Who is an

Infringer? Direct, Contributory and Induced, Defences of Infringement:

5.2.1 Research Exemption, Invalidity, Misuse, Failure to mark, Laches and Estoppel
and first sale doctrine

References:

1. W.R. Cornish, Intellectual Property, Sweet & Maxwell, London (2000)

2. P. Narayana, Patent Law, Wadhwa Publication

3. Merges, Patent Law and Policy: Cases and Materials, 1996

4. Brian C. Reid, A Practical Guide to Patent Law, 2nd Edition, 1993

5. Brinkhof (Edited), Patent Cases, Wolters Kluwer.

6. Prof. Willem Hoyng & Frank Eijsvogels, Global Patent Litigation, Strategy and

Practice, Wolters Kluwer.

7. Gregory Stobbs, Software Patents Worldwide, Wolters Kluwer.

8. Feroz Ali Khader, The Law of Patents- With a special focus on Pharmaceuticals in

India, Lexis Nexis Butterworths Wadhwa, Nagpur.

9. Sookman, Computer Law, 1996

10. N.S. Gopalakrishnan & T.G. Agitha, Principles of Intellectual Property (2009). Eastern
Book Company, Lucknow.

--------////---------