Fugoo Style-S Bluetooth Speaker

User Manual Version 4, 10 May 2017 Model FSNA7

Contents
In the Box ..........................................................................................................................2
Speaker controls................................................................................................................2
Charging and battery charge status...................................................................................4
Checking your battery charge status..............................................................................4
Charging your speaker..................................................................................................4
Powering on the speaker....................................................................................................5
Connecting to a source device ..........................................................................................5
Connecting through an audio cable..................................................................................5
Pairing and connecting with another Bluetooth device.....................................................5
Disconnecting from another Bluetooth device..................................................................6
Reconnecting....................................................................................................................6
Clearing all Bluetooth pairings..........................................................................................6
Audio playback...................................................................................................................6
Adjusting the volume....................................................................................................6
Playback ........................................................................................................................6
Taking a phone call - speakerphone mode.........................................................................7
Taking a call.......................................................................................................................7
Voice Response mode.......................................................................................................7
Customization / other functions..........................................................................................7
Normal and Loud modes...................................................................................................7
Voice prompts: normal, low, off..........................................................................................7
Power Save on / off...........................................................................................................9
Resetting the speaker........................................................................................................9
Updating the firmware.......................................................................................................9
Care and maintenance.......................................................................................................10
Specifications.....................................................................................................................11
Optional accessories..........................................................................................................12
Customer support...............................................................................................................12
FCC and legal notices........................................................................................................13

User Manual Fugoo Style-S Bluetooth Speaker Model FSNA7 page 1 5/6/2019
In the box
• Fugoo Style-S Bluetooth Speaker
• Charger
• Micro USB cable
• Startup Guide

Fugoo Style-S Bluetooth Speaker controls

7 9 8
2 1

3 4 5 6

part description
1 Micro-USB connector For updating the speaker’s firmware
For connection to audio devices without
2 Auxiliary audio input jack
Bluetooth capability
3 Microphone For speakerphone and voice commands
4 Volume up button ( + ) Increases loudness
For audio control, voice response and
5 Action button (  )
speakerphone control
6 Volume down button ( - ) Decreases loudness
7 Power button ( ) Turns the speaker on / off
8 Bluetooth button ( ) For pairing with Bluetooth source devices
9 LED indicator Indicates status of the speaker

User Manual Fugoo Style-S Bluetooth Speaker Model FSNA7 page 2 5/6/2019
User Manual Fugoo Style-S Bluetooth Speaker Model FSNA7 page 3 5/6/2019
POWERING UP AND CONNECTIONS
SPEAKER SETTINGS
Power On / Off.....................Hold 1 second

Battery status......................................Click To change settings on the speaker, hold the following

Pair with a device...............Hold 3 seconds buttons while powering on the speaker:

Disconnect device...............................Click

Clear all paired devices....Hold 10 seconds Normal / Outdoor mode...............Hold O and

Reset......................Hold and O 10 seconds Power Save On / Off.....................Hold - and

Voice prompts level:..........Hold + and - and

PLAYBACK CONTROL
Play / Pause......................................Click O
SPEAKERPHONE
Volume up...........................................Click +
Answer / end call......................................Click O
Volume down......................................Click –
Reject a call..................................Double-click O
Previous track........................Click O and –
Mute microphone in a call..............Click + and –
Next track.................................Click O and +

Voice Control.......................Hold O 1 second

PAIR TWO SPEAKERS TOGETHER
Place 1st unit in Pairing Mode.......Click and +

Place 2nd unit in Pairing Mode. .......Click and -

Toggle between Double/Stereo Mode...............

.............................................Click and + and –

User Manual Fugoo Style-S Bluetooth Speaker Model FSNA7 page 4 5/6/2019
 • CAUTION: Never connect a cable to any of the connectors on the speaker if they are
wet, or are at risk of getting wet.

Charging and battery charge status

Checking the battery level
• With the speaker powered on, click the (Power) button momentarily. The LED
indicator blinks green one to six times to indicate the charge status of the battery.
• If voice prompts are enabled, the speaker responds with "Battery is almost full." or
another indication of the state of the battery’s charge, per the table below.
• If the battery charge gets very low, the LED indicator will blink red, and after several
minutes, the speaker will say “Please recharge the battery. Powering off.”, and the
speaker will turn off.

LED indicator Voice prompt

six green blinks Battery is full.
five green blinks Battery is almost full.
four green blinks Battery is three quarters.
three green blinks Battery is half.
two green blinks Battery is one quarter.
one green blink Battery is low.
• While the speaker’s battery is being charged, the LED will slowly pulse on/off green.

• When the speaker’s battery has reached full charge, the LED will glow solid green.

Charging your speaker

• Connect supplied USB Cable to the AC adapter and to the speaker’s micro USB jack.
• Plug the AC adapter into an AC power outlet.
• Charging the speaker will take from 3 – 5 hours depending on the current state of
the battery and the charger used. To charge as quickly as possible, use the
supplied AC adapter. Other chargers can be used, but battery charging may be
slower.
Powering on your speaker
• Click the (Power) button momentarily to power the speaker on.
• When the speaker runs from battery power, it will power itself off after a period of inactivity,
unless the Power Save feature is Off. (See the Power Save Mode section for further detail.)
• Hold the (Power) button for one second to turn the speaker off.

Connecting your speaker to smartphones and other devices

You can connect to your Fugoo Style-S Bluetooth Speaker either through its audio input
jack or through a Bluetooth wireless link. Only one of these inputs can be active at a
time.
Connecting through an audio cable to the audio input jack
• Connect one end of a 3.5 mm audio cable to your Fugoo Bluetooth Speaker's audio
input jack, then connect the other end to the headphones jack of your audio source
device.
• The LED glows blue and a voice prompt says, “Disconnected. Bluetooth off.
Connected”.
• Plugging an audio cable into the speaker's audio input jack turns off the Bluetooth
wireless link, to save power and maximize battery life.
Pairing and connecting with another Bluetooth device
1. Make sure that a 3.5 mm audio cable is not connected to the speaker's audio input.
2. Place your Fugoo Style-S Bluetooth Speaker and your other Bluetooth device
within 33 feet (10 meters) of each other.
3. Turn the speaker and the other device on.
4. Hold the (Bluetooth) button for three seconds. The LED blinks blue and red
repeatedly. If voice prompts are enabled, the speaker says, “Pairing mode.
Use the Bluetooth settings of your device to connect.” The speaker will
remain in pairing mode for three minutes, or until it pairs with your device.
5. On your other Bluetooth device, turn on Bluetooth, which will allow it to discover the
speaker. (See the Bluetooth settings information for your device.)
6. Select 'Fugoo Style-S” on your Bluetooth device.
7. Wait briefly for the speaker to discover your Bluetooth device. If voice prompts
are enabled, the speaker will say, "Pairing successful” and “Connected”.
If you hear "Pairing is unsuccessful. Please try again." Try pairing again.

If you are using a Bluetooth device that has been previously paired to the
speaker, and all Bluetooth pairings have been cleared from the speaker, it
may be necessary to tell the Bluetooth device to 'Forget this Device'.
 Instructions on how to forget a device from an iPhone or iPad are as follows:
1. Tap Settings.
2. Tap Bluetooth.
3. Tap the icon to the right of 'Fugoo Style-S Speaker'.
4. Tap 'Forget this Device'.
5. Tap 'Forget Device'.
As long as the speaker is in pairing mode, the iPhone should find the speaker
again, and pair with it.

Disconnecting from another Bluetooth device

To disconnect your Fugoo Style-S Bluetooth Speaker from a Bluetooth source device, you
can:
• Click the (Bluetooth) button on your speaker.
• Move your speaker and the Bluetooth source device apart until they disconnect.
• Turn off your speaker.
• Turn off the Bluetooth source device.
• Turn off Bluetooth on your Bluetooth source device.
• Plug an audio cable into the speaker’s audio input jack.
• Disconnecting temporarily interrupts the Bluetooth wireless link between the speaker
and the currently paired source device, which permits the speaker to re-connect with
another source device to which it has been previously paired. The disconnected
device will still be paired with the speaker, allowing them to automatically reconnect
at another time.

Reconnecting
• To reconnect to a Bluetooth source device to which you have previously paired, just
turn on the speaker and the source device, and place them within 33 feet (10
meters) of each other.
It’s also necessary that no cable be plugged into the audio input jack.
Typically, speaker and the source device will reconnect automatically.
• If voice prompts are enabled, the speaker says "Connected".

Clearing all Bluetooth source device pairings

• To clear all of the Bluetooth pairings with source devices, turn the speaker on, and
then hold the (Bluetooth) button for ten seconds, until the speaker says "All
Bluetooth pairings cleared. Pairing mode. Please use the Bluetooth settings of your
device to connect.”

Audio playback
Adjusting the volume
• Click the + (Volume up) or – (Volume down) buttons to raise or lower the volume.
 Playback
• Play / pause – Click O (Action Button) to toggle playing and pausing your audio.
• Next track: click O and + to skip to the next track of the recording you're listening to.
• Previous track: O and – to skip to the previous track of the recording you're listening to.

Taking a phone call – Speakerphone mode

Your Fugoo Bluetooth Speaker can act as a speakerphone for your cell phone or
smartphone. You can receive and end calls and manage a call on hold.

Taking a call
If you take a call on your phone when it is connected to the speaker, you'll hear it ringing
through the speaker.
• Click the  (Action) button to receive (pick up) the call.
• Talk and listen through during the call.
• Click + or – to raise or lower the volume.
• Click + and – simultaneously to mute / un-mute the microphone.
• Click  to end (hang up) the call.
• If you have a call on hold, press  to switch back and forth between the two calls.
• Double-click  to end the active call and switch to the call on hold.
• Use your phone’s controls if you would like to transfer the call from the speaker back
to your phone.

Voice Response mode

• While your phone or other device is paired to the speaker (and a call is not in
progress) hold  (Action) for one second. A tone sounds through the speaker to
activate a voice response service, such as Siri, Google Now, or Cortana.
• Speak voice response commands through the speaker’s microphone.
• Click + or – to raise or lower the volume.
• Click the  (Action) button) to cancel voice response mode.

Customization / other functions

Normal and Loud modes
• There are two loudness modes for your Fugoo Style-S Bluetooth Speaker. Outdoor
mode is the default, and boosts the maximum loudness level. It is ideal for playing
music outdoor and in large rooms. Normal mode is designed for the best overall
sound quality with most music. Both modes employ dynamic real-time equalization
to boost the loudness of songs that have been recorded at lower gain levels.
• To switch from one mode to the other, start with the speaker off, then press and hold
 the Action (O) button and press the power button. The speaker will turn on, and
announce which mode it's in. Repeat this process to switch to the next mode.
Voice prompts level
• There are three voice prompt levels: Normal, Low and Off. Normal is the default
volume level – the level for voice prompts you will hear when you first turn on your
Fugoo Bluetooth Speaker. The Low level is about 20% lower than the Normal level.
• To change the voice prompt level from Normal to Low, start with the speaker off,
then press and hold the – (volume down) and + (volume up) buttons, then also
press the (Power) button for one second. The speaker will turn on, and announce
that voice prompts have been set to Low.
• Follow the same steps as above to change the voice prompt level from Low to Off.
• Follow the same steps again to change the voice prompt level from Off to Normal.
Power Save mode On / Off
The speaker can shut itself off to conserve power, after a period of inactivity. Power Save
mode can be toggled on and off by holding the – (volume down) button while turning the
speaker on with the (Power) button.
If Power Save mode is on, then the speaker will shut itself off as follows…

 If the speaker is not connected to a source device

and is not charging, the speaker turns off after 15 minutes of inactivity.
 If the speaker is not connected to a source device
and is charging, the speaker turns off after 30 minutes of inactivity.
 If the speaker is connected to a source device
and is not charging, the speaker turns off after 1 hour of inactivity.
 If the speaker is connected to a source device
and is charging, the speaker will not shut off automatically.

If Power Save mode is off, then the speaker will remain on until you turn it off by pressing
the (Power) button for one second.
Resetting the speaker
• It the speaker becomes unresponsive, or behaves differently than you believe it
should, try resetting it. Hold the (Bluetooth) and  (Action) buttons for ten
seconds. This will reset the speaker, without clearing its pairing list.
• The speaker can be reset whether it's on or off.

Updating your Fugoo Bluetooth Speaker's firmware

Fugoo posts new versions of the speaker firmware from time to time to add features,
improve the sound quality and loudness, and enhance the user interface.
The firmware updates are installed by an Update Utility that is compatible with Windows
10, Windows 8, Windows 7, Windows Vista, and Windows XP.

Please visit the product support page on our website to download the Update Utility and
the latest speaker firmware. Find us at http://www.fugoo.com
Care and maintenance
Cleaning the unit

Note: When the speaker is being used outdoors or when cleaning with water, please insure
the waterproof/dustproof port door is closed.

• After a day at the sandy beach or the muddy trail, rinse your speaker off with warm
water from a sink After a day at the sandy beach or the muddy trail, rinse your
speaker off with warm water from a sink faucet. Don't use soap, detergents, or any
chemical cleaning products. Don't use a garden hose, compressed air, or any other
high-pressure stream to clean it, as this may damage the speaker drivers. Don't use
a brush of any kind, for the same reason.
Specifications
Audio
• Four proprietary, custom-designed acoustic drivers:
• Two 54 mm tweeters
• Two 105mm x 66mm passive radiators
• 20W (10W per channel)
• Full-range frequency response: 60Hz - 20KHz
• Supports AAC and SBC codecs for high-quality Bluetooth stereo sound
• Supports CVC codec for improved speaker phone performance

Connectivity
• Bluetooth 4.2 for wireless connectivity up to 100 feet
• Bluetooth Low Energy for link to Fugoo remote control
• Bluetooth Audio/Video Remote Control Profile (AVRCP 1.5) enables control from
your audio device and the optional Remote Control.
• Other Bluetooth profiles: Advanced Audio Distribution Profile (A2DP) 1.3, Hands-
Free Profile (HFP) 1.6, Headset Profile (HSP) 1.2
• 3.5mm stereo input for wired connection
• Micro USB for firmware updates and power
Microphone
• Omnidirectional microphone
• Full-duplex capable in speakerphone mode
• Digital signal processor for echo cancellation and noise reduction
Power
• Built-in lithium-Ion rechargeable battery
• Charged by 5VDC AC adapter (included)
• Battery life displayed on devices running iOS 6 and higher
Environmental
• Operating Temp, connected to AC adapter: 32° to 104° F 0° to 40° C)
• Operating Temp, not connected to AC adapter: 14° to 104° F (-10° to 40° C)
• Storage Temp: -4° to 140° F (-20° to 60° C)
• IP67 rated: Dustproof and waterproof to 1 meter for 30 minutes
Optional accessories
For more information, visit Fugoo's Accessories webpage.

Remote Control
Please see the separate Fugoo Remote Control User Manual.

Product support
 Visit Fugoo's Support page at support.fugoo.com for help with connecting,
to view our FAQs or to ask us a question.
 Visit Fugoo's downloads page at fugoo.com/product-support, for firmware
updates, alternative voice prompts, and mobile wallpaper images,
 Send us a support request at [email protected].
Legal notices
FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution!

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

IC Statement

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.

Le présent appareil est conforme audio CNR d'Industrie Canada applicables audio appareils radio exempts de licence. L'exploitation est autorisée
audio deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can
obtain Canadian information on RF exposure and compliance.

Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf,
utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf.

COFETEL
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia
perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.
 Safety Instruction for CB and CE-LVD

1. Do not install this equipment in a confined or building-in space such as a book case or similar unit, and remain a well
ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper,
table-cloths, curtains etc

2. WARNING：To reduce the risk of fire or electric shock; do not expose this apparatus to rain or moisture. The apparatus shall
not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.

3．CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

4．The battery (battery or batteries of battery pack)shall not be exposed to excessive heat such as sunshine, fire or the like.

5.

Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection
systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Frequency: 2.402GHz-2.48GHz
The Max. transmit power: 4 mW