Scribd
Upload
3K views

Work Completion Report

1. The applicant has completed installation of a renewable energy system and is submitting a work completion report with details of the system components to request inspection and commissioning. 2. The report provides specifications for the solar PV modules, inverter, cables, wiring, distribution boxes, battery bank, earthing, net meter, signage, and switches installed. 3. It also includes the GPS coordinates of the system and confirms that the equipment meets technical standards and that an operations manual was provided to the consumer.

Uploaded by

Dilip Suryawanshi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
3K views

Work Completion Report

1. The applicant has completed installation of a renewable energy system and is submitting a work completion report with details of the system components to request inspection and commissioning. 2. The report provides specifications for the solar PV modules, inverter, cables, wiring, distribution boxes, battery bank, earthing, net meter, signage, and switches installed. 3. It also includes the GPS coordinates of the system and confirms that the equipment meets technical standards and that an operations manual was provided to the consumer.

Uploaded by

Dilip Suryawanshi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Work Completion Report

(To be submitted by the applicant)

To,

The Executive Engineer


………………………………….. O&M-City
………………………………………
Madhya Pradesh Madya/Paschim/Poorv Vidyut Vitran Company

Sir/Medam.

Sub: Submission of work completion report (to be submitted by the applicant) for
system documentation requirements.
Ref: Our Application Registration No.: ________________ dtd : ________________

With reference to the above, I hereby confirm to you that we have completed the
work of installation of the renewable energy system and submit the following basic
information for your perusal and request you to arrange to inspect and commission the
system at the earliest:

A. Details of the Solar PV module


1. Model No.
2. Name and address of manufacturer
3. Capacity of each Module (Wp)
4. No. of Modules
5. Total Capacity (kWp)
6. Date of installation

B. Details of the Inverter


1. Name and address of the inverter manufacturer
2. Brand Name of the inverter
3. Model No.
4. AC capacity of individual inverter (kW)
5. No. of inverters installed
6. Total AC capacity of inverter (kW)
7. Serial Nos.
8. Date of installation
C. Details of the Cables: DC
1. Make / Name of manufacturer
2. Size & Type

D. Details of the AC wiring


1. Make/Name of manufacturer
2. Size & Type

E. Details of the DC distribution box


1. Make/Name of manufacturer
2. Sl. No.
3. DC Surge Protection Device
4. MCB/Isolator quantity & capacity
5. Size & Type

F. Details of the AC distribution box


1. Make/Name of manufacturer
2. Sl. No.
3. AC Surge Protection Device
4. MCB/MCCB quantity & capacity
5. Size & Type

G. Details of Battery Bank (if applicable)


1. Make / Name of manufacturer
2. Type of battery
3. Sr. Nos.
4. Capacity of each Cell (V / AH)

1. Number of Cells in series


2. Number of Cells in parallel
3. Total capacity in AH
4. Total battery bank voltage
H. Details of the Earthing

1. Earth resistance (Shall be less than 2 otms)


2. Size of the Earth wire / flat*
3. Two separate Earthing points
Modules & DC Surge arrester Yes/No
Inverter, AC Surge protection device & Yes/No
Lightening Arrester
4. Size & Type

I. Details of the Net meter details (please enclose the test report of the bi-
directional meter tested at the laboratory of the Discom)

1. Make
2. Serial No.
3. Capacity
4. Type / Model
5. Single ph. / Three ph.
6. CT Ratio
7. Date of Test by MT, Discom

J. Details of the Caution signage


K. Provision of manual and automatic switches : Yes / No
L. G.P.S. Co-ordinates of the Renewable Energy System Installation
(i) Latitude: (ii) Longitude:
M. Whether Operation and Maintenance Manual provided to the consumer:
Yes/No

Certified that the above said renewable energy system was installed and the equipment
used comply with the Technical and Safety standards as specified by the Discom under
net metering program.

Signature of the Applicant Name and Signature of the


System Installer

Name and Address with Seal Name of the firm and address
Name : _____________________ ________________________
___________________________ ________________________

Date : ______________________ Date: ___________________

Enclosures:
1. Test report of net meter tested at the laboratory of the Discom.
2. Copy of the IEC/IS Test certificates of PV modules, Inverter etc.
3. Data sheets/Drawing for the array mounting System.
4. Actual Single line wiring diagram (SLD) of the SPV System.
5. Copy of Maintenance & Operation information manual provided by the System
Installer. Copy of Interconnection Agreement on non-judicial stamp paper of Rs.
500/- with Discom.

You might also like