Scribd
Upload
347 views

Microprocessor PDF

This document outlines a course on microprocessors that is worth 5 credits. The objectives are to understand the architecture of 16-bit and 32-bit microprocessors, interfacing microprocessors with memory and peripherals, techniques for faster execution of instructions, RISC and CISC processors, and multi-core processors. The outcomes are that learners will be able to write 8086 programs, design 8086 systems, understand performance enhancement techniques, and distinguish RISC and CISC processors. The course covers topics like 8086/8088 architecture, instruction sets, 8086 system design, 80386DX, Pentium, and SuperSPARC processors. Assessment includes laboratory work, assignments, and attendance.

Uploaded by

fareeda
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
347 views

Microprocessor PDF

This document outlines a course on microprocessors that is worth 5 credits. The objectives are to understand the architecture of 16-bit and 32-bit microprocessors, interfacing microprocessors with memory and peripherals, techniques for faster execution of instructions, RISC and CISC processors, and multi-core processors. The outcomes are that learners will be able to write 8086 programs, design 8086 systems, understand performance enhancement techniques, and distinguish RISC and CISC processors. The course covers topics like 8086/8088 architecture, instruction sets, 8086 system design, 80386DX, Pentium, and SuperSPARC processors. Assessment includes laboratory work, assignments, and attendance.

Uploaded by

fareeda
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Course Code Course/ Subject Name Credits

CPC501 Microprocessor 5

Objectives:
1. To understand basic architecture of 16 bit and 32 bit microprocessors.

2. To understand interfacing of 16 bit microprocessor with memory and peripheral chips involving
system design.

3. To understand techniques for faster execution of instructions and improve speed of operation
and performance of microprocessors.

4. To understand RISC and CISC based microprocessors.

5. To understand concept of multi core processors.

Outcomes: Learner will be able to…


1. Write programs to run on 8086 microprocessor based systems.

2. Design system using memory chips and peripheral chips for 16 bit 8086 microprocessor.

3. Understand and devise techniques for faster execution of instructions, improve speed of
operations and enhance performance of microprocessors.

4. Distinguish between RISC and CISC processors.

5. Understand multi core processor and its advantages.

Module Detailed Contents Hrs.


01 Intel 8086/8088 Architecture 10
1.1 8086/8088 Microprocessor Architecture, Pin Configuration,
Programming Model, Memory Segmentation, Study of 8284
Clock Generator, Operating Modes, Study of 8288 Bus
Controller, Timing diagrams for Read and Write operations,
Interrupts
02 Instruction Set and Programming 08
2.1 Instruction Set of 8086, Addressing Modes, Assembly Language
Programming, Mixed Language Programming with C Language and
Assembly Language.
03 System designing with 8086 12
3.1 Memory Interfacing: SRAM, ROM and DRAM (using DRAM
ControllerIntel 8203).
3.2 Applications of the Peripheral Controllers namely 8255PPI,
8253PIT, 8259PIC and 8237DMAC. Interfacing of the above Peripheral
Controllers with 8086 microprocessor.
3.3 Introduction to 8087 Math Coprocessor and 8089 I/O
Processor.
04 Intel 80386DX Processor 06
4.1 Study of Block Diagram, Signal Interfaces, Bus Cycles, Programming
Model, Operating Modes, Address Translation Mechanism in Protected
Mode, Memory Management, Protection Mechanism.
05 Pentium Processor 08
5.1 Block Diagram, Superscalar Operation, Integer & Floating Point
Pipeline Stages, Branch Prediction, Cache Organization.
5.2 Comparison of Pentium 2, Pentium 3 and Pentium 4 Processors.
Comparative study of Multi core Processors i3, i5 and i7.
06 SuperSPARC Architecture 04
6.1 SuperSPARC Processor, Data Formats, Registers, Memory model.
Study of SuperSPARC Architecture.

Term Work:

The distribution of marks for term work shall be as follows:

 Laboratory work (experiments/practical & case studies)…………. (15) Marks.


 Assignments……………………………………………………….. (05) Marks.
 Attendance …………………………………………………… (05) Marks

TOTAL: …………………………………………………………… (25) Marks.

Practical/Experiments:

1. Total eight experiments / practical must be performed out of which five practical must be
performed on assemblers for 8086 and three experiments must be performed on interfacing of
8086 with peripheral chips like 8255 PPI, 8253 PIT, 8259 PIC and 8237 DMAC.

2. In addition to eight experiments/practical, two case studies are mandatory, one case study on
RISC processor and second case study on CISC processor.

Practical examination will be conducted based on the above syllabus.


Text Books:

1. Microprocessor and Interfacing: Douglas Hall, Tata McGraw Hill.

2. Microcomputer Systems: 8086/8088 family Architecture, Programming and Design: Liu &
Gibson, PHI Publication.

3. Pentium Processor System Architecture: Tom Shanley & Don Anderson, AddisonWesley.

4. Advanced Microprocessor: Daniel Tabak, Tata McGraw Hill.

5. The 80386DX Microprocessor: Hardware, Software and Interfacing: Walter A Triebel,


Prentice Hall.

Reference Books:

1. 8086/8088 family: Design Programming and Interfacing: John Uffenbeck , PHI.

2. Intel Microprocessors: Barry B. Brey, 8th Edition, Pearson Education India.

3. Processor Architecture and Interfacing: Swati Joshi, Atul Joshi, Hemlata Jadhav, Wiley.

4. The X86 Microprocessors: Architecture and Programming (8086 to Pentium): Das Lyla B,
Pearson Education India.

5. The SPARC Architecture Manual

6. I Intel Manuals

7. Programmer’s Reference Manual for IBM Personal Computers: Steven Armbrust, Ted
Forgeron, McGraw Hill

8. IBM PC Assembly Language and Programming: Peter Abel, 5th Edition, Prentice Hall of
India

You might also like