Scribd
Upload
53 views5 pages

Problem 2.10: Solution

The document describes a problem involving the analysis of a transmission line terminated by a load. It is given that the maximum voltage on the line is 1.5V and the minimum is 0.6V. It then calculates the magnitude of the reflection coefficient at the load to be 0.43 based on these voltage measurements. A second problem is then presented involving a transmission line terminated by a load with impedance (30-j50)Ω, where several parameters of the standing wave on the line are calculated including the reflection coefficient, standing wave ratio, positions of voltage maxima and minima.

Uploaded by

Laura Natalia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
53 views5 pages

Problem 2.10: Solution

The document describes a problem involving the analysis of a transmission line terminated by a load. It is given that the maximum voltage on the line is 1.5V and the minimum is 0.6V. It then calculates the magnitude of the reflection coefficient at the load to be 0.43 based on these voltage measurements. A second problem is then presented involving a transmission line terminated by a load with impedance (30-j50)Ω, where several parameters of the standing wave on the line are calculated including the reflection coefficient, standing wave ratio, positions of voltage maxima and minima.

Uploaded by

Laura Natalia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Problem 2.

10 Using a slotted line, the voltage on a lossless transmission line was


found to have a maximum magnitude of 1.5 V and a minimum magnitude of 0.6 V.
Find the magnitude of the load’s reflection coefficient.
Solution: From the definition of the Standing Wave Ratio given by Eq. (2.73),

|Ve |max 1.5


S= = = 2.5.
|Ve |min 0.6

Solving for the magnitude of the reflection coefficient in terms of S, as in


Example 2-5,
S − 1 2.5 − 1
|Γ| = = = 0.43.
S + 1 2.5 + 1
Problem 2.12 A 50-Ω lossless transmission line is terminated in a load with
impedance ZL = (30 − j50) Ω. The wavelength is 8 cm. Find:
(a) the reflection coefficient at the load,
(b) the standing-wave ratio on the line,
(c) the position of the voltage maximum nearest the load,
(d) the position of the current maximum nearest the load.
(e) Verify quantities in parts (a)–(d) using CD Module 2.4. Include a printout of
the screen display.
Solution:
(a) From Eq. (2.59),

ZL − Z0 (30 − j50) − 50 ◦
Γ= = = 0.57e− j79.8 .
ZL + Z0 (30 − j50) + 50

(b) From Eq. (2.73),

1 + |Γ| 1 + 0.57
S= = = 3.65.
1 − |Γ| 1 − 0.57

(c) From Eq. (2.70)

θr λ nλ −79.8◦ × 8 cm π rad n × 8 cm
dmax = + = +
4π 2 4π 180◦ 2
= −0.89 cm + 4.0 cm = 3.11 cm.

(d) A current maximum occurs at a voltage minimum, and from Eq. (2.72),

dmin = dmax − λ /4 = 3.11 cm − 8 cm/4 = 1.11 cm.

(e) The problem statement does not specify the frequency, so in Module 2.4 we
need to select the combination of f and εr such that λ = 5 cm. With εr chosen as 1,

c 3 × 108
f= = = 3.75 GHz.
λ 8 × 10−2
The generator parameters are irrelevant to the problem.
The results listed in the output screens are very close to those given in parts (a)
through (d).
Figure P2.19(a)
Figure P2.19(b)
Problem 2.13 On a 150-Ω lossless transmission line, the following observations
were noted: distance of first voltage minimum from the load = 3 cm; distance of first
voltage maximum from the load = 9 cm; S = 3. Find ZL .
Solution: Distance between a minimum and an adjacent maximum = λ /4. Hence,

9 cm − 3 cm = 6 cm = λ /4,
λ
or λ = 24 cm. Accordingly, the first voltage minimum is at dmin = 3 cm = 8.
Application of Eq. (2.71) with n = 0 gives

2π λ
θr − 2 × × = −π ,
λ 8
which gives θr = −π /2.

S−1 3−1 2
|Γ| = = = = 0.5.
S+1 3+1 4

Hence, Γ = 0.5 e− jπ /2 = − j0.5.


Finally, · ¸ · ¸
1+Γ 1 − j0.5
ZL = Z0 = 150 = (90 − j120) Ω.
1−Γ 1 + j0.5

You might also like