0% found this document useful (0 votes)
42 views

325 WP SPV Module: Electrical Characteristics Mechanical Characteristics

This document provides specifications for a 325W solar photovoltaic module. The module produces 325W of power at maximum power point with a 16.75% efficiency rating. It measures 1960mm by 990mm by 40mm and weighs 22.5kg. The module comes with a 10-year limited product warranty and 25-year limited power output warranty with a minimum of 90% output at 10 years and 80% at 25 years.

Uploaded by

Subham Hazra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
42 views

325 WP SPV Module: Electrical Characteristics Mechanical Characteristics

This document provides specifications for a 325W solar photovoltaic module. The module produces 325W of power at maximum power point with a 16.75% efficiency rating. It measures 1960mm by 990mm by 40mm and weighs 22.5kg. The module comes with a 10-year limited product warranty and 25-year limited power output warranty with a minimum of 90% output at 10 years and 80% at 25 years.

Uploaded by

Subham Hazra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

WS – 325

 
325 Wp SPV MODULE
                Mechanical Characteristics
Electrical Characteristics*  
  Length x Width x Thickness 
Nominal Maximum Power (Pm) in Watts  325   1960 x 990 x 40 
(L x W x T) ‐  mm 

Power tolerance  0 / + 5 W  Mounting Holes Pitch (Y) – mm  1060 

Mounting Holes Pitch (X) – mm  942 
Open Circuit Voltage (Voc) in Volts  45.35 
Weight (kg)  22.50 
Short Circuit Current (Isc) in Amps  9.55 
Solar Cells per Module (Units) / 
72 / (12*6) 
Arrangement 
Voltage at Maximum Power (Vmp) in Volts  36.85 
Solar Cell Type   Multi crystalline Silicon 
Current at Maximum Power (Imp) in Amps  8.82  Tempered & Low Iron Glass /   
Front Cover (Material / Thickness) 
                3.2mm / 4mm 
Maximum System Voltage in Volts  1000 
Encapsulate  Ethylene Vinyl Acetate 
Module Efficiency (%)  16.75  Frame Material  Anodized Aluminum Alloy 
Weatherproof PPO / IP65 
Maximum Series Fuse Rating (A)   15 
Junction Box (Material / Type)  /IP67 enclosure with bypass 
*Under Standard Test Conditions (STC) of 1000 W/m2 irradiance,  diodes  
  AM 1.5 spectrum and 25°C cell temperature.  Connector (Protection degree / 
IP67 rated / MC4 compatible 
Type) 
Cable cross‐section  4 mm2 
 
 
                                                                      
Warranty
 Positive tolerance Modules 
                                                                
 
   Excellent generation performance with reasonable   10 years Limited Product Warranty  
 
  cost   25 years Limited Power output Warranty: 
 
   Undergoes rigorous quality control and in‐house  o Minimum 90% at the end of 10 years 
 
testing  o Minimum 80% at the end of 25 years 
 
   100% Electroluminescence test to ensure error free  LINEAR DEGRADATION OF WARRANTY 
 
Modules  
 Heavy duty anodized Aluminum frames with pre‐  
drilled holes   for quick installation   
 Salt mist corrosion resistance and Ammonia corrosion   
resistance   
 Long lasting and high efficiency modules   
 Withstands hail, snow and ice storms   
 
 
         
  Certifications
 
 
 
                                                                                                                                                                                                                                                          
                                                                                                       
 

 
 
IEC 61215  IEC 61730‐1 & 2  IEC 61701  IEC 62716 ISO 9001:2008 ISO 14001:2004     OHSAS 18001:2007
   

www.waaree.com
WS – 325

Design specifications
 
 
 
 
Thermal Characteristics
 
Temperature coefficient of Current (Isc), α (%/ºC) 0.0718
 
  Temperature coefficient of Voltage (Voc), ß
-0.3253
  (%/ºC)
 
1200mm
1200mm
Temperature coefficient of Power (Pm), γ (%/ºC) -0.4106
 
 
NOCT ( ºC) 46 ± 2
 
                         Operating temperature range (ºC) -40 to 85
 
   (40mm)
(40mm)
 
 
 
 
 
 
 
   
I-V Curve Variation with Irradiance I-V Curve Variation with Temperature
                           

                                                                       
 
 WAAREE  is  one  of  India's  leading  multi‐technology  companies,  headquartered  at  Mumbai.  Founded  in 
About Waaree: 1989,  WAAREE  successfully  developed  cutting  edge  technologies  to  become  one  of  the  most  preferred 
brands in the field of Instrumentation. The company has transformed itself from a single business into a multi‐technology organization, 
diversifying into exciting areas of Solar Energy, Industrial Valves, Petroleum Equipment’s and Process control Instrumentation. WAAREE 
has a presence in over 68 countries, serviced through its 20 sales offices in India & Dubai, and more than 105 global channel partners. 
WAAREE has a huge list of satisfied customers over the years. WAAREE is committed to supply the best quality products & technology 
to  its  customers.  WAAREE’s  products  are  manufactured  at  its  state‐of‐the‐art  manufacturing  facilities  and  is  committed  to  excel  in 
providing the society with world class quality products.   
 
Contact: WAAREE ENERGIES LIMITED 
      602, Western Edge‐I, Off. Western Express Highway, 
                          Borivali (E), Mumbai 400066, Maharashtra 
                Ph.: +91‐22‐66444444, Fax: +91‐22‐66444400, Email: [email protected]                                                                                  
 
o  
The specifications in this datasheet are subject to change without prior notice. 

www.waaree.com

You might also like