Scribd
Upload
1K views4 pages

0 Park 0 Shunt

This document provides instructions for configuring various Peugeot vehicle models from park mode to customer mode for normal usage upon delivery to customers. Park mode deactivates some equipment to reduce battery consumption while parked. The procedures involve removing fuses or shunts from their park positions and placing them in customer positions in the fuse box located in different areas of the vehicle, depending on the model. Models and locations vary, but generally involve switching off the ignition, accessing the fuse box, and moving the fuse or shunt.

Uploaded by

Gligorijević Darko
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views4 pages

0 Park 0 Shunt

This document provides instructions for configuring various Peugeot vehicle models from park mode to customer mode for normal usage upon delivery to customers. Park mode deactivates some equipment to reduce battery consumption while parked. The procedures involve removing fuses or shunts from their park positions and placing them in customer positions in the fuse box located in different areas of the vehicle, depending on the model. Models and locations vary, but generally involve switching off the ignition, accessing the fuse box, and moving the fuse or shunt.

Uploaded by

Gligorijević Darko
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

308 - E3BM0102P0 - New vehicle preparation : Configuration to customer mode ( Park s...

Page 1 of 4

NEW VEHICLE PREPARATION : CONFIGURATION TO CUSTOMER MODE ( PARK


SHUNT ) :

Park mode is a function that saves battery power consumption while the vehicle is on a park, by deactivating
some of the vehicle's equipment .

URGENT : The vehicle has to be handed over to the customer in "customer mode" ( Configuration for
normal usage ) .

N.B. : According to model, the fuses and shunts can be found in the glovebox, ashtray, or in reserve in the
fuse box .

1. Peugeot 107
No park shunt .

2. Peugeot 1007 Prior to RPO No. 11038 - BI VAN CAN vehicles

Figure : C5FM006D

CAUTION : No park shunt, but absence of fuse F4 .

Operating procedure :
 Switch off the ignition
 Remove the access flap of the cabin fusebox ( Storage area at the base of the dashboard, LH side )
 Refit the fuse (F4) 20A - Yellow ( Retrieve the fuse located in the centre console ashtray )

3. Peugeot 206 - Partner 2 - ( BI VAN CAN vehicles )

http://127.0.0.1:6090/afficheByRef.do?doc=E3BM0102P0 4/13/2010
308 - E3BM0102P0 - New vehicle preparation : Configuration to customer mode ( Park s... Page 2 of 4

Figure : C5FM007D

"a" : Transit configuration .


"b" : Customer configuration .
Operating procedure :
 Switch off the ignition
 Remove the access flap of the cabin fusebox ( Storage area at the base of the dashboard, LH side )
 Remove the fuse from position "a"
 Place the fuse in the fuse reserve
 Take the shunt located in the ashtray
 Place the park shunt in position SH "b"
 Refit the cabin fusebox access cover

4. peugeot 207 - 307 - 308 - 407 - 607 - 1007 From RPO number 11039 - Vehicles  
"Full CAN"

N.B. : There are two types of BSI which differ by the location of the park shunt above or below the range of
fuses . The operating procedure is identical in both cases .

http://127.0.0.1:6090/afficheByRef.do?doc=E3BM0102P0 4/13/2010
308 - E3BM0102P0 - New vehicle preparation : Configuration to customer mode ( Park s... Page 3 of 4

Figure : C5FM008D

"a" or "c" : Transit configuration .


"b" or "d" : Customer configuration .
Operating procedure :
 Switch off the ignition
 Wait 1,50 minute for the BSI to go to sleep
 Remove the access flap of the cabin fusebox ( Storage area at the base of the dashboard, LH side )
 Remove the shunt from position ( "a" or "c" )
 Place the park shunt in position ( "b" or "d" )
 Refit the cabin fusebox access cover

5. peugeot 807 - expert 2

Figure : C5FM009D

"a" : Transit configuration .


"b" : Customer configuration .

http://127.0.0.1:6090/afficheByRef.do?doc=E3BM0102P0 4/13/2010
308 - E3BM0102P0 - New vehicle preparation : Configuration to customer mode ( Park s... Page 4 of 4

Operating procedure :
 Switch off the ignition
 Remove the access flap of the cabin fusebox ( Storage area at the base of the dashboard, RH side )
 Remove the shunt from position a
 Fit the shunt in position "b"
 Refit the cabin fusebox access cover

6. Boxer 3 - BIPPER
Check that the vehicle is configured in customer mode and not in park mode ; Using the diagnostic tool :
 Perform a global test
 Choose from the list of ECUs : BSI1
 In the menu "ECU functioning mode" : Change to customer mode

7. PEUGEOT 4007

Figure : C4AM094D

N.B. : The shunt system of this vehicle does not require the repositioning of a fuse but instead uses a
reversible push fuse . The reversible push fuse is linked mechanically to the box with 2 stable positions .

N.B. : No supply available before the IGN+ with the exception of the electric seat adjustments . In
disconnected mode (park shunt) the nominal consumption is only 2,2 mA .

Operation to be carried out :


 Switch off the ignition
 Remove : The engine fuse box cover ( Under the bonnet )
 Press the shunt fuse down manually
 Refit : The engine fuse box cover

http://127.0.0.1:6090/afficheByRef.do?doc=E3BM0102P0 4/13/2010

You might also like