dsPIC33FJ32GP202/204 and

dsPIC33FJ16GP304
Data Sheet
High-Performance, 16-bit
Digital Signal Controllers

© 2008 Microchip Technology Inc. Preliminary DS70290B

Note the following details of the code protection feature on Microchip devices:
• Microchip products meet the specification contained in their particular Microchip Data Sheet.

• Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.

• There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.

• Microchip is willing to work with the customer who is concerned about the integrity of their code.

• Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”

Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

Information contained in this publication regarding device Trademarks

applications and the like is provided only for your convenience The Microchip name and logo, the Microchip logo, Accuron,
and may be superseded by updates. It is your responsibility to
dsPIC, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro,
ensure that your application meets with your specifications.
PICSTART, PRO MATE, rfPIC and SmartShunt are registered
MICROCHIP MAKES NO REPRESENTATIONS OR trademarks of Microchip Technology Incorporated in the
WARRANTIES OF ANY KIND WHETHER EXPRESS OR
U.S.A. and other countries.
IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION, FilterLab, Linear Active Thermistor, MXDEV, MXLAB,
INCLUDING BUT NOT LIMITED TO ITS CONDITION, SEEVAL, SmartSensor and The Embedded Control Solutions
QUALITY, PERFORMANCE, MERCHANTABILITY OR Company are registered trademarks of Microchip Technology
FITNESS FOR PURPOSE. Microchip disclaims all liability Incorporated in the U.S.A.
arising from this information and its use. Use of Microchip Analog-for-the-Digital Age, Application Maestro, CodeGuard,
devices in life support and/or safety applications is entirely at dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN,
the buyer’s risk, and the buyer agrees to defend, indemnify and ECONOMONITOR, FanSense, In-Circuit Serial
hold harmless Microchip from any and all damages, claims, Programming, ICSP, ICEPIC, Mindi, MiWi, MPASM, MPLAB
suits, or expenses resulting from such use. No licenses are Certified logo, MPLIB, MPLINK, mTouch, PICkit, PICDEM,
conveyed, implicitly or otherwise, under any Microchip PICDEM.net, PICtail, PIC32 logo, PowerCal, PowerInfo,
intellectual property rights. PowerMate, PowerTool, REAL ICE, rfLAB, Select Mode, Total
Endurance, UNI/O, WiperLock and ZENA are trademarks of
Microchip Technology Incorporated in the U.S.A. and other
countries.
SQTP is a service mark of Microchip Technology Incorporated
in the U.S.A.
All other trademarks mentioned herein are property of their
respective companies.
© 2008, Microchip Technology Incorporated, Printed in the
U.S.A., All Rights Reserved.
Printed on recycled paper.

Microchip received ISO/TS-16949:2002 certification for its worldwide

headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Company’s quality system processes and procedures
are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.

DS70290B-page ii Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and
dsPIC33FJ16GP304
High-Performance, 16-bit Digital Signal Controllers

Operating Range: Digital I/O:

• Up to 40 MIPS operation (@ 3.0-3.6V): • Peripheral Pin Select Functionality
- Industrial temperature range (-40°C to +85°C) • Up to 35 programmable digital I/O pins
- Extended temperature range (-40°C to +125°C) • Wake-up/Interrupt-on-Change for up to 21 pins
• Output pins can drive from 3.0V to 3.6V
High-Performance DSC CPU: • Up to 5V output with open drain configuration
• Modified Harvard architecture • All digital input pins are 5V tolerant
• C compiler optimized instruction set • 4 mA sink on all I/O pins
• 16-bit wide data path
System Management:
• 24-bit wide instructions
• Linear program memory addressing up to 4M • Flexible clock options:
instruction words - External, crystal, resonator, internal RC
• Linear data memory addressing up to 64 Kbytes - Fully integrated Phase-Locked Loop (PLL)
• 83 base instructions, mostly one word/one cycle - Extremely low jitter PLL
• Sixteen 16-bit General Purpose Registers • Power-up Timer
• Two 40-bit accumulators with rounding and • Oscillator Start-up Timer/Stabilizer
saturation options • Watchdog Timer with its own RC oscillator
• Flexible and powerful addressing modes: • Fail-Safe Clock Monitor
- Indirect • Reset by multiple sources
- Modulo
- Bit-Reversed Power Management:
• Software stack • On-chip 2.5V voltage regulator
• 16 x 16 fractional/integer multiply operations • Switch between clock sources in real time
• 32/16 and 16/16 divide operations • Idle, Sleep and Doze modes with fast wake-up
• Single-cycle multiply and accumulate:
- Accumulator write back for DSP operations Timers/Capture/Compare:
- Dual data fetch • Timer/Counters, up to three 16-bit timers:
• Up to ±16-bit shifts for up to 40-bit data - Can pair up to make one 32-bit timer
- One timer runs as Real-Time Clock with
Interrupt Controller: external 32.768 kHz oscillator
• 5-cycle latency - Programmable prescaler
• 118 interrupt vectors • Input Capture (up to four channels):
• Up to 21 available interrupt sources - Capture on up, down or both edges
• Up to three external interrupts - 16-bit capture input functions
• Seven programmable priority levels - 4-deep FIFO on each capture
• Four processor exceptions • Output Compare (up to 2 channels):
- Single or Dual 16-Bit Compare mode
On-Chip Flash and SRAM: - 16-bit Glitchless PWM Mode
• Flash program memory (up to 32 Kbytes)
• Data SRAM (2 Kbytes)
• Boot and General Security for Program Flash

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 3

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

Communication Modules: Analog-to-Digital Converters (ADCs):

• 4-wire SPI: • 10-bit, 1.1 Msps or 12-bit, 500 ksps conversion:
- Framing supports I/O interface to simple - Two and four simultaneous samples (10-bit ADC)
codecs - Up to 13 input channels with auto-scanning
- Supports 8-bit and 16-bit data - Conversion start can be manual or
- Supports all serial clock formats and synchronized with one of four trigger sources
sampling modes - Conversion possible in Sleep mode
• I2C™: - ±2 LSb max integral nonlinearity
- Full Multi-Master Slave mode support - ±1 LSb max differential nonlinearity
- 7-bit and 10-bit addressing
- Bus collision detection and arbitration CMOS Flash Technology:
- Integrated signal conditioning
• Low-power, high-speed Flash technology
- Slave address masking
• Fully static design
• UART:
• 3.3V (±10%) operating voltage
- Interrupt on address bit detect
• Industrial and extended temperature
- Interrupt on UART error
• Low-power consumption
- Wake-up on Start bit from Sleep mode
- 4-character TX and RX FIFO buffers Packaging:
- LIN bus support
• 28-pin SPDIP/SOIC/QFN-S
- IrDA® encoding and decoding in hardware
• 44-pin QFN/TQFP
- High-Speed Baud mode
- Hardware Flow Control with CTS and RTS Note: See the device variant tables for exact
peripheral features per device.

DS70290B-page 4 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
dsPIC33FJ32GP202/204 and
dsPIC33FJ16GP304 Product Families
The device names, pin counts, memory sizes and
peripheral availability of each family are listed below,
followed by their pinout diagrams.

TABLE 1: dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 CONTROLLER FAMILIES

Program Flash Memory (Kbyte)

Remappable Peripherals

10-Bit/12-Bit ADC
External Interrupts(2)

I/O Pins (Max)

Output Compare

Packages
Input Capture
Remappable

16-bit Timer
(Kbyte)

Std. PWM

I2C™
RAM
Pins

Device

UART
Pins

SPI
dsPIC33FJ32GP202 28 32 2 16 3(1) 4 2 1 3 1 1 ADC, 1 21 SDIP
10 ch SOIC
QFN-S
dsPIC33FJ32GP204 44 32 2 26 3(1) 4 2 1 3 1 1 ADC, 1 35 QFN
13 ch TQFP
dsPIC33FJ16GP304 44 16 2 26 3(1) 4 2 1 3 1 1 ADC, 1 35 QFN
13 ch TQFP
Note 1: Only two out of three timers are remappable.
2: Only two out of three interrupts are remappable.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 5

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

Pin Diagrams
28-Pin SDIP, SOIC

MCLR 1 28 AVDD
AN0/VREF+/CN2/RA0 2 27 AVSS
AN1/VREF-/CN3/RA1 3 26 AN9/RP15(1)/CN11/RB15

dsPIC33FJ32GP202
PGED1/AN2/C2IN-/RP0(1)/CN4/RB0 4 25 AN10/RP14(1)/CN12/RB14
PGEC1/AN3/C2IN+/RP1(1)/CN5/RB1 5 24 AN11/RP13(1)/CN13/RB13
AN4/RP2(1)/CN6/RB2 6 23 AN12/RP12(1)/CN14/RB12
AN5/RP3(1)/CN7/RB3 7 22 PGEC2/TMS/RP11(1)/CN15/RB11
VSS 8 21 PGED2/TDI/RP10(1)/CN16/RB10
OSCI/CLKI/CN30/RA2 9 20 VCAP/VDDCORE
OSCO/CLKO/CN29/RA3 10 19 VSS
SOSCI/RP4(1)/CN1/RB4 11 18 TDO/SDA1/RP9(1)/CN21/RB9
SOSCO/T1CK/CN0/RA4 12 17 TCK/SCL1/RP8(1)/CN22/RB8
VDD 13 16 INT0/RP7/CN23/RB7
PGED3/ASDA1/RP5(1)/CN27/RB5 14 15 PGEC3/ASCL1/RP6(1)/CN24/RB6

28-Pin QFN-S AN10/RP14(1)/CN12/RB14

AN9/RP15(1)/CN11/RB15
AN0/VREF+/CN2/RA0
AN1/VREF-/CN3/RA1

MCLR
AVDD
AVSS

28 27 26 25 24 23 22
PGED1/AN2/C2IN-/RP0(1)/CN4/RB0 1 21 AN11/RP13(1)/CN13/RB13
PGEC1/AN3/C2IN+/RP1(1)/CN5/RB1 2 20 AN12/RP12(1)/CN14/RB12
AN4/RP2(1)/CN6/RB2 3 19 PGEC2/TMS/RP11(1)(1)/CN15/RB11
AN5/RP3(1)/CN7/RB3 4
dsPIC33FJ32GP202 18 PGED2/TDI/RP10/CN16/RB10
VSS 5 17 VCAP/VDDCORE
OSCI/CLKI/CN30/RA2 6 16 Vss
OSCO/CLKO/CN29/RA3 7 15 TDO/SDA1/RP9(1)/CN21/RB9
8 9 10 11 12 13 14
VDD
PGED3/ASDA1/RP5(1)/CN27/RB5
PGEC3/ASCL1/RP6/CN24/RB6
INT0/RP7(1(1))/CN23/RB7
TCK/SCL1/RP8(1)/CN22/RB8
SOSCI/RP4/CN1/RB4
SOSCO/T1CK/CN0/RA4

Note 1: The RPn pins can be used by any remappable peripheral. See Table 1 for the list of available
peripherals.

DS70290B-page 6 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

Pin Diagrams (Continued)

44-Pin QFN

PGEC1/AN3/C2IN+/RP1(1)/CN5/RB1
PGED1/AN2/C2IN-/RP0(1)/CN4/RB0

AN10/RP14(1)/CN12/RB14
AN9/RP15(1)/CN11/RB15
AN0/VREF+/CN2/RA0
AN1/VREF-/CN3/RA1

TMS/RA10
TCK/RA7
MCLR
AVDD
AVSS
AN4/RP2(1)/CN6/RB2 21 AN11/RP13(1)/CN13/RB13
20
11
22

19
18
17
16
15
14
13
12
23
AN5/RP3(1)/CN7/RB3 24 10 AN12/RP12(1)/CN14/RB12
AN6/RP16(1)/CN8/RC0 25 9 PGEC2/RP11(1)/CN15/RB11
AN7/RP17(1)/CN9/RC1 26 8 PGED2/RP10(1)/CN16/RB10
AN8/RP18(1)/CN10/RC2 27 7 VCAP/VDDCORE
dsPIC33FJ32GP204
VDD 28 dsPIC33FJ16GP304 6 VSS
VSS 29 5 RP25(1)/CN19/RC9
OSCI/CLKI/CN30/RA2 30 4 RP24(1)/CN20/RC8
OSCO/CLKO/CN29/RA3 31 3 RP23(1)/CN17/RC7
TDO/RA8 32 2 RP22(1)/CN18/RC6
SOSCI/RP4(1)/CN1/RB4 33 1 SDA1/RP9(1)/CN21/RB9
41
34
35
36
37
38
39
40

42
43
44
TDI/RA9
SOSCO/T1CK/CN0/RA4

PGED3/ASDA1/RP5 /CN27/RB5
PGEC3/ASCL1/RP6(1)/CN24/RB6
INT0/RP7(1)/CN23/RB7
SCL1/RP8(1)/CN22/RB8
RP19(1)/CN28/RC3
RP20(1)/CN25/RC4
RP21(1)/CN26/RC5
VSS
VDD
(1)

Note 1: The RPn pins can be used by any remappable peripheral. See Table 1 for the list of available
peripherals.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 7

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

Pin Diagrams (Continued)

44-Pin TQFP

PGEC1/AN3/C2IN+/RP1(1)/CN5/RB1
PGED1/AN2/C2IN-/RP0(1)/CN4/RB0

AN9/RP15(1)/CN11/RB15
AN10/RP14(1)/CN12/RB14
AN0/VREF+/CN2/RA0
AN1/VREF-/CN3/RA1

TMS/RA10
TCK/RA7
MCLR
AVDD
AVSS
22
21
20
19
18
17
16
15
14
13
12
AN4/RP2(1)/CN6/RB2 23 11 AN11/RP13(1)/CN13/RB13
AN5/RP3(1)/CN7/RB3 24 10 AN12/RP12(1)/CN14/RB12
AN6/RP16(1)/CN8/RC0 25 9 PGEC2/RP11(1)/CN15/RB11
AN7/RP17(1)/CN9/RC1 26 8 PGED2/RP10(1)/CN16/RB10
AN8/RP18(1)/CN10/RC2 27 7 VCAP/VDDCORE
VDD
dsPIC33FJ32GP204 6 VSS
28
VSS 29
dsPIC33FJ16GP304 5 RP25(1)/CN19/RC9
OSCI/CLKI/CN30/RA2 30 4 RP24(1)/CN20/RC8
OSCO/CLKO/CN29/RA3 31 3 RP23(1)/CN17/RC7
TDO/RA8 32 2 RP22/CN18/RC6
SOSCI/RP4(1)/CN1/RB4 33 1 SDA1(1)/RP9(1)/CN21/RB9
34
35
36
37

39
40
41
42
43
44
38
SOSCO/T1CK/CN0/RA4
TDI/RA9

PGED3/ASDA1/RP5(1)/CN27/RB5
PGEC3/ASCL1/RP6(1)/CN24/RB6
INT0/ RP7(1)/CN23/RB7
SCL1/RP8(1)/CN22/RB8
RP19(1)/CN28/RC3
RP20(1)/CN25/RC4
RP21(1)/CN26/RC5
VSS
VDD

Note 1: The RPn pins can be used by any remappable peripheral. See Table 1 for the list of available
peripherals.

DS70290B-page 8 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

Table of Contents
1.0 Device Overview ........................................................................................................................................................................ 11
2.0 CPU............................................................................................................................................................................................ 15
3.0 Memory Organization ................................................................................................................................................................. 27
4.0 Flash Program Memory.............................................................................................................................................................. 53
5.0 Resets ....................................................................................................................................................................................... 59
6.0 Interrupt Controller ..................................................................................................................................................................... 67
7.0 Oscillator Configuration .............................................................................................................................................................. 95
8.0 Power-Saving Features............................................................................................................................................................ 105
9.0 I/O Ports ................................................................................................................................................................................... 109
10.0 Timer1 ...................................................................................................................................................................................... 133
11.0 Timer2/3 Feature...................................................................................................................................................................... 135
12.0 Input Capture............................................................................................................................................................................ 141
13.0 Output Compare....................................................................................................................................................................... 143
14.0 Serial Peripheral Interface (SPI)............................................................................................................................................... 147
15.0 Inter-Integrated Circuit (I2C™) ................................................................................................................................................. 153
16.0 Universal Asynchronous Receiver Transmitter (UART) ........................................................................................................... 161
17.0 10-bit/12-bit Analog-to-Digital Converter (ADC) ....................................................................................................................... 167
18.0 Special Features ...................................................................................................................................................................... 181
19.0 Instruction Set Summary .......................................................................................................................................................... 189
20.0 Development Support............................................................................................................................................................... 197
21.0 Electrical Characteristics .......................................................................................................................................................... 201
22.0 Packaging Information.............................................................................................................................................................. 235
Appendix A: Revision History............................................................................................................................................................. 241
Index .................................................................................................................................................................................................. 245
The Microchip Web Site ..................................................................................................................................................................... 249
Customer Change Notification Service .............................................................................................................................................. 249
Customer Support .............................................................................................................................................................................. 249
Reader Response .............................................................................................................................................................................. 250
Product Identification System ............................................................................................................................................................ 251

TO OUR VALUED CUSTOMERS

It is our intention to provide our valued customers with the best documentation possible to ensure successful use of your Microchip
products. To this end, we will continue to improve our publications to better suit your needs. Our publications will be refined and
enhanced as new volumes and updates are introduced.
If you have any questions or comments regarding this publication, please contact the Marketing Communications Department via
E-mail at [email protected] or fax the Reader Response Form in the back of this data sheet to (480) 792-4150. We
welcome your feedback.

Most Current Data Sheet

To obtain the most up-to-date version of this data sheet, please register at our Worldwide Web site at:
http://www.microchip.com
You can determine the version of a data sheet by examining its literature number found on the bottom outside corner of any page.
The last character of the literature number is the version number, (e.g., DS30000A is version A of document DS30000).

Errata
An errata sheet, describing minor operational differences from the data sheet and recommended workarounds, may exist for current
devices. As device/documentation issues become known to us, we will publish an errata sheet. The errata will specify the revision
of silicon and revision of document to which it applies.
To determine if an errata sheet exists for a particular device, please check with one of the following:
• Microchip’s Worldwide Web site; http://www.microchip.com
• Your local Microchip sales office (see last page)
When contacting a sales office, please specify which device, revision of silicon and data sheet (include literature number) you are
using.

Customer Notification System

Register on our web site at www.microchip.com to receive the most current information on all of our products.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 9

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

NOTES:

DS70290B-page 10 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

1.0 DEVICE OVERVIEW

Note: This data sheet summarizes the features
of the dsPIC33FJ32GP202/204 and
dsPIC33FJ16GP304 devices. It is not
intended to be a comprehensive reference
source. To complement the information in
this data sheet, refer to the “dsPIC33F
Family Reference Manual”.
This document contains device-specific information for
the dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
Digital Signal Controller (DSC) devices. The dsPIC33F
devices contain extensive Digital Signal Processor
(DSP) functionality with a high performance 16-bit
microcontroller (MCU) architecture.
Figure 1-1 shows a general block diagram of the core
and peripheral modules in the
dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
family of devices. Table 1-1 lists the functions of the
various pins shown in the pinout diagrams.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 11

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

FIGURE 1-1: dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 BLOCK DIAGRAM

PSV and Table
Data Access
Control Block Y Data Bus

Interrupt X Data Bus

PORTA
Controller

16
8 16 16 16

Data Latch Data Latch

23
PCU PCH PCL X RAM Y RAM PORTB
23
Program Counter
Stack Loop Address Address
Control Control Latch Latch
Logic Logic
16
23 16
16

Address Generator Units Remappable

Address Latch Pins

Program Memory
EA MUX
Address Bus
Data Latch ROM Latch
24
16
Literal Data
16

Instruction
Decode and
Control Instruction Reg
16

Control Signals
to Various Blocks DSP Engine

16 x 16
OSC2/CLKO Timing Power-up W Register Array
OSC1/CLKI Generation Timer Divide Support
16
Oscillator
FRC/LPRC Start-up Timer
Oscillators
Power-on
Reset
Precision
16-bit ALU
Band Gap Watchdog
Reference Timer
16
Brown-out
Voltage Reset
Regulator

VDDCORE/VCAP VDD, VSS MCLR

Timers OC/
UART1 ADC1
1-3 PWM1-2

IC1,2,7,8 CNx I2C1

Note: Not all pins or features are implemented on all device pinout configurations. See pinout diagrams for the specific pins
and features present on each device.

DS70290B-page 12 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 1-1: PINOUT I/O DESCRIPTIONS

Buffer
Pin Name Pin Type Description
Type
AN0-AN12 I Analog Analog input channels.
CLKI I ST/CMOS External clock source input. Always associated with OSC1 pin function.
CLKO O — Oscillator crystal output. Connects to crystal or resonator in Crystal Oscillator
mode. Optionally functions as CLKO in RC and EC modes. Always
associated with OSC2 pin function.
OSC1 I ST/CMOS Oscillator crystal input. ST buffer when configured in RC mode; CMOS
otherwise.
OSC2 I/O — Oscillator crystal output. Connects to crystal or resonator in Crystal Oscillator
mode. Optionally functions as CLKO in RC and EC modes.
SOSCI I ST/CMOS 32.768 kHz low-power oscillator crystal input; CMOS otherwise.
SOSCO O — 32.768 kHz low-power oscillator crystal output.
CN0-CN30 I ST Change notification inputs.
Can be software programmed for internal weak pull-ups on all inputs.
IC1-IC2 I ST Capture inputs 1/2.
IC7-IC8 Capture inputs 7/8.
OCFA I ST Compare Fault A input (for Compare Channels 1 and 2).
OC1-OC2 O — Compare outputs 1 through 2.
INT0 I ST External interrupt 0.
INT1 I ST External interrupt 1.
INT2 I ST External interrupt 2.
RA0-RA4 I/O ST PORTA is a bidirectional I/O port.
RA7-RA10
RB0-RB15 I/O ST PORTB is a bidirectional I/O port.
RC0-RC9 I/O ST PORTC is a bidirectional I/O port.
T1CK I ST Timer1 external clock input.
T2CK I ST Timer2 external clock input.
T3CK I ST Timer3 external clock input.
U1CTS I ST UART1 clear to send.
U1RTS O — UART1 ready to send.
U1RX I ST UART1 receive.
U1TX O — UART1 transmit.
SCK1 I/O ST Synchronous serial clock input/output for SPI1.
SDI1 I ST SPI1 data in.
SDO1 O — SPI1 data out.
SS1 I/O ST SPI1 slave synchronization or frame pulse I/O.
SCL1 I/O ST Synchronous serial clock input/output for I2C1.
SDA1 I/O ST Synchronous serial data input/output for I2C1.
ASCL1 I/O ST Alternate synchronous serial clock input/output for I2C1.
ASDA1 I/O ST Alternate synchronous serial data input/output for I2C1.
TMS I ST JTAG Test mode select pin.
TCK I ST JTAG test clock input pin.
TDI I ST JTAG test data input pin.
TDO O — JTAG test data output pin.
PGD1/EMUD1 I/O ST Data I/O pin for programming/debugging communication channel 1.
PGC1/EMUC1 I ST Clock input pin for programming/debugging communication channel 1.
PGD2/EMUD2 I/O ST Data I/O pin for programming/debugging communication channel 2.
PGC2/EMUC2 I ST Clock input pin for programming/debugging communication channel 2.
PGD3/EMUD3 I/O ST Data I/O pin for programming/debugging communication channel 3.
PGC3/EMUC3 I ST Clock input pin for programming/debugging communication channel 3.
Legend: CMOS = CMOS compatible input or output; Analog = Analog input; P = Power
ST = Schmitt Trigger input with CMOS levels; O = Output; I = Input

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 13

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 1-1: PINOUT I/O DESCRIPTIONS (CONTINUED)

Buffer
Pin Name Pin Type Description
Type
VDDCORE P — CPU logic filter capacitor connection.
VSS P — Ground reference for logic and I/O pins.
VREF+ I Analog Analog voltage reference (high) input.
VREF- I Analog Analog voltage reference (low) input.
AVDD P P Positive supply for analog modules. This pin must be connected at all times.
MCLR I/P ST Master Clear (Reset) input. This pin is an active-low Reset to the device.
Avss P P Ground reference for analog modules.
VDD P — Positive supply for peripheral logic and I/O pins.
Legend: CMOS = CMOS compatible input or output; Analog = Analog input; P = Power
ST = Schmitt Trigger input with CMOS levels; O = Output; I = Input

DS70290B-page 14 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

2.0 CPU 2.1 Data Addressing Overview

Note: This data sheet summarizes the features The data space can be addressed as 32K words or
of the dsPIC33FJ32GP202/204 and 64 Kbytes and is split into two blocks, referred to as X
dsPIC33FJ16GP304 family of devices. It and Y data memory. Each memory block has its own
is not intended to be a comprehensive independent Address Generation Unit (AGU). The
reference source. To complement the MCU class of instructions operates solely through the
information in this data sheet, refer to the X memory AGU, which accesses the entire memory
dsPIC33F Family Reference Manual, map as one linear data space. Certain DSP instructions
“Section 2. CPU” (DS70204), which is operate through the X and Y AGUs to support dual
available from the Microchip website operand reads, which splits the data address space
(www.microchip.com). into two parts. The X and Y data space boundary is
device-specific.
The dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
CPU module has a 16-bit (data) modified Harvard Overhead-free circular buffers (Modulo Addressing
architecture with an enhanced instruction set, including mode) are supported in both X and Y address spaces.
significant support for DSP. The CPU has a 24-bit The Modulo Addressing removes the software
instruction word with a variable length opcode field. The boundary checking overhead for DSP algorithms.
Program Counter (PC) is 23 bits wide and addresses up Furthermore, the X AGU circular addressing can be
to 4M x 24 bits of user program memory space. The used with any of the MCU class of instructions. The X
actual amount of program memory implemented varies AGU also supports Bit-Reversed Addressing to greatly
by device. A single-cycle instruction prefetch simplify input or output data reordering for radix-2 FFT
mechanism is used to help maintain throughput and algorithms.
provides predictable execution. All instructions execute The upper 32 Kbytes of the data space memory map
in a single cycle, with the exception of instructions that can optionally be mapped into program space at any
change the program flow, the double word move 16K program word boundary defined by the 8-bit
(MOV.D) instruction and the table instructions. Program Space Visibility Page (PSVPAG) register. The
Overhead-free program loop constructs are supported program to data space mapping feature lets any
using the DO and REPEAT instructions, both of which are instruction access program space as if it were data
interruptible at any point. space.
The dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
devices have sixteen, 16-bit working registers in the 2.2 DSP Engine Overview
programmer’s model. Each of the working registers can
serve as a data, address or address offset register. The The DSP engine features a high-speed 17-bit by 17-bit
16th working register (W15) operates as a software Stack multiplier, a 40-bit ALU, two 40-bit saturating
Pointer (SP) for interrupts and calls. accumulators and a 40-bit bidirectional barrel shifter.
The barrel shifter is capable of shifting a 40-bit value up
The dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 to 16 bits right or left, in a single cycle. The DSP
instruction set has two classes of instructions: MCU and instructions operate seamlessly with all other
DSP. These two instruction classes are seamlessly instructions and have been designed for optimal
integrated into a single CPU. The instruction set includes real-time performance. The MAC instruction and other
many addressing modes and is designed for optimum C associated instructions can concurrently fetch two data
compiler efficiency. For most instructions, the operands from memory while multiplying two W
dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 is registers and accumulating and optionally saturating
capable of executing a data (or program data) memory the result in the same cycle. This instruction
read, a working register (data) read, a data memory write functionality requires that the RAM data space be split
and a program (instruction) memory read per instruction for these instructions and linear for all others. Data
cycle. As a result, three parameter instructions can be space partitioning is achieved in a transparent and
supported, allowing A + B = C operations to be executed flexible manner through dedicating certain working
in a single cycle. registers to each address space.
A block diagram of the CPU is shown in Figure 2-1. The
programmer’s model for the dsPIC33FJ32GP202/204 and
dsPIC33FJ16GP304 is shown in Figure 2-2.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 15

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

2.3 Special MCU Features The dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

supports 16/16 and 32/16 divide operations, both frac-
The dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 tional and integer. All divide instructions are iterative oper-
features a 17-bit by 17-bit single-cycle multiplier that is ations. They must be executed within a REPEAT loop,
shared by both the MCU ALU and DSP engine. The mul- resulting in a total execution time of 19 instruction cycles.
tiplier can perform signed, unsigned and mixed-sign mul- The divide operation can be interrupted during any of
tiplication. Using a 17-bit by 17-bit multiplier for 16-bit by those 19 cycles without loss of data.
16-bit multiplication not only allows you to perform
mixed-sign multiplication, it also achieves accurate results A 40-bit barrel shifter is used to perform up to a 16-bit left
for special operations, such as (-1.0) x (-1.0). or right shift in a single cycle. The barrel shifter can be
used by both MCU and DSP instructions.

FIGURE 2-1: dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 CPU CORE BLOCK DIAGRAM

PSV and Table

Data Access
Control Block Y Data Bus

Interrupt X Data Bus

Controller

16 16 16
8 16

Data Latch Data Latch

23
PCU PCH PCL X RAM Y RAM 16
23
Program Counter
Stack Loop Address Address
Control Control Latch Latch
Logic Logic
23
16 16

Address Latch Address Generator Units

Program Memory
EA MUX
Address Bus
Data Latch ROM Latch
24
16 16
Literal Data

Instruction
Decode and
Control Instruction Reg
16

Control Signals DSP Engine

to Various Blocks
16 x 16
W Register Array
Divide Support 16

16-bit ALU

16

To Peripheral Modules

DS70290B-page 16 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
FIGURE 2-2: dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 PROGRAMMER’S MODEL
D15 D0
W0/WREG
PUSH.S Shadow
W1
DO Shadow
W2
W3 Legend
W4
DSP Operand W5
Registers
W6
W7
Working Registers
W8
W9
DSP Address
Registers W10
W11
W12/DSP Offset
W13/DSP Write Back
W14/Frame Pointer
W15/Stack Pointer

SPLIM Stack Pointer Limit Register

AD39 AD31 AD15 AD0

DSP AccA
Accumulators AccB

PC22 PC0
0 Program Counter

7 0
TBLPAG Data Table Page Address

7 0
PSVPAG Program Space Visibility Page Address

15 0
RCOUNT REPEAT Loop Counter

15 0
DCOUNT DO Loop Counter

22 0
DOSTART DO Loop Start Address

22
DOEND DO Loop End Address

15 0
CORCON Core Configuration Register

OA OB SA SB OAB SAB DA DC IPL2 IPL1 IPL0 RA N OV Z C STATUS Register

SRH SRL

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 17

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

2.4 CPU Control Registers

CPU control registers include:
• SR: CPU Status Register
• CORCON: CORE Control Register

REGISTER 2-1: SR: CPU STATUS REGISTER

R-0 R-0 R/C-0 R/C-0 R-0 R/C-0 R -0 R/W-0
OA OB SA(1) SB(1) OAB SAB DA DC
bit 15 bit 8

R/W-0(2) R/W-0(3) R/W-0(3) R-0 R/W-0 R/W-0 R/W-0 R/W-0

IPL<2:0>(2) RA N OV Z C
bit 7 bit 0

Legend:
C = Clear only bit R = Readable bit U = Unimplemented bit, read as ‘0’
S = Set only bit W = Writable bit -n = Value at POR
‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15 OA: Accumulator A Overflow Status bit

1 = Accumulator A overflowed
0 = Accumulator A has not overflowed
bit 14 OB: Accumulator B Overflow Status bit
1 = Accumulator B overflowed
0 = Accumulator B has not overflowed
bit 13 SA: Accumulator A Saturation ‘Sticky’ Status bit(1)
1 = Accumulator A is saturated or has been saturated at some time
0 = Accumulator A is not saturated
bit 12 SB: Accumulator B Saturation ‘Sticky’ Status bit(1)
1 = Accumulator B is saturated or has been saturated at some time
0 = Accumulator B is not saturated
bit 11 OAB: OA || OB Combined Accumulator Overflow Status bit
1 = Accumulators A or B have overflowed
0 = Neither Accumulators A or B have overflowed
bit 10 SAB: SA || SB Combined Accumulator ‘Sticky’ Status bit
1 = Accumulators A or B are saturated or have been saturated at some time in the past
0 = Neither Accumulator A or B are saturated
Note: This bit can be read or cleared (not set). Clearing this bit will clear SA and SB.
bit 9 DA: DO Loop Active bit
1 = DO loop in progress
0 = DO loop not in progress

Note 1: This bit can be read or cleared (not set).

2: The IPL<2:0> bits are concatenated with the IPL<3> bit (CORCON<3>) to form the CPU Interrupt Priority
Level. The value in parentheses indicates the IPL if IPL<3> = 1. User interrupts are disabled when
IPL<3> = 1.
3: The IPL<2:0> Status bits are read only when NSTDIS = 1 (INTCON1<15>).

DS70290B-page 18 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
REGISTER 2-1: SR: CPU STATUS REGISTER (CONTINUED)
bit 8 DC: MCU ALU Half Carry/Borrow bit
1 = A carry-out from the 4th low-order bit (for byte sized data) or 8th low-order bit (for word sized data)
of the result occurred
0 = No carry-out from the 4th low-order bit (for byte sized data) or 8th low-order bit (for word sized
data) of the result occurred
bit 7-5 IPL<2:0>: CPU Interrupt Priority Level Status bits(2)
111 = CPU Interrupt Priority Level is 7 (15), user interrupts disabled
110 = CPU Interrupt Priority Level is 6 (14)
101 = CPU Interrupt Priority Level is 5 (13)
100 = CPU Interrupt Priority Level is 4 (12)
011 = CPU Interrupt Priority Level is 3 (11)
010 = CPU Interrupt Priority Level is 2 (10)
001 = CPU Interrupt Priority Level is 1 (9)
000 = CPU Interrupt Priority Level is 0 (8)
bit 4 RA: REPEAT Loop Active bit
1 = REPEAT loop in progress
0 = REPEAT loop not in progress
bit 3 N: MCU ALU Negative bit
1 = Result was negative
0 = Result was non-negative (zero or positive)
bit 2 OV: MCU ALU Overflow bit
This bit is used for signed arithmetic (2’s complement). It indicates an overflow of a magnitude that
causes the sign bit to change state.
1 = Overflow occurred for signed arithmetic (in this arithmetic operation)
0 = No overflow occurred
bit 1 Z: MCU ALU Zero bit
1 = An operation that affects the Z bit has set it at some time in the past
0 = The most recent operation that affects the Z bit has cleared it (i.e., a non-zero result)
bit 0 C: MCU ALU Carry/Borrow bit
1 = A carry-out from the Most Significant bit of the result occurred
0 = No carry-out from the Most Significant bit of the result occurred

Note 1: This bit can be read or cleared (not set).

2: The IPL<2:0> bits are concatenated with the IPL<3> bit (CORCON<3>) to form the CPU Interrupt Priority
Level. The value in parentheses indicates the IPL if IPL<3> = 1. User interrupts are disabled when
IPL<3> = 1.
3: The IPL<2:0> Status bits are read only when NSTDIS = 1 (INTCON1<15>).

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 19

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 2-2: CORCON: CORE CONTROL REGISTER

U-0 U-0 U-0 R/W-0 R/W-0 R-0 R-0 R-0
— — — US EDT(1) DL<2:0>
bit 15 bit 8

R/W-0 R/W-0 R/W-1 R/W-0 R/C-0 R/W-0 R/W-0 R/W-0

SATA SATB SATDW ACCSAT IPL3(2) PSV RND IF
bit 7 bit 0

Legend: C = Clear only bit

R = Readable bit W = Writable bit -n = Value at POR ‘1’ = Bit is set
0’ = Bit is cleared ‘x = Bit is unknown U = Unimplemented bit, read as ‘0’

bit 15-13 Unimplemented: Read as ‘0’

bit 12 US: DSP Multiply Unsigned/Signed Control bit
1 = DSP engine multiplies are unsigned
0 = DSP engine multiplies are signed
bit 11 EDT: Early DO Loop Termination Control bit(1)
1 = Terminate executing DO loop at end of current loop iteration
0 = No effect
bit 10-8 DL<2:0>: DO Loop Nesting Level Status bits
111 = 7 DO loops active
•
•
•
001 = 1 DO loop active
000 = 0 DO loops active
bit 7 SATA: AccA Saturation Enable bit
1 = Accumulator A saturation enabled
0 = Accumulator A saturation disabled
bit 6 SATB: AccB Saturation Enable bit
1 = Accumulator B saturation enabled
0 = Accumulator B saturation disabled
bit 5 SATDW: Data Space Write from DSP Engine Saturation Enable bit
1 = Data space write saturation enabled
0 = Data space write saturation disabled
bit 4 ACCSAT: Accumulator Saturation Mode Select bit
1 = 9.31 saturation (super saturation)
0 = 1.31 saturation (normal saturation)
bit 3 IPL3: CPU Interrupt Priority Level Status bit 3(2)
1 = CPU interrupt priority level is greater than 7
0 = CPU interrupt priority level is 7 or less
bit 2 PSV: Program Space Visibility in Data Space Enable bit
1 = Program space visible in data space
0 = Program space not visible in data space
bit 1 RND: Rounding Mode Select bit
1 = Biased (conventional) rounding enabled
0 = Unbiased (convergent) rounding enabled
bit 0 IF: Integer or Fractional Multiplier Mode Select bit
1 = Integer mode enabled for DSP multiply ops
0 = Fractional mode enabled for DSP multiply ops

Note 1: This bit will always read as ‘0’.

2: The IPL3 bit is concatenated with the IPL<2:0> bits (SR<7:5>) to form the CPU interrupt priority level.

DS70290B-page 20 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
2.5 Arithmetic Logic Unit (ALU) 1. 32-bit signed/16-bit signed divide
2. 32-bit unsigned/16-bit unsigned divide
The dsPIC33FJ32GP202/204 and
dsPIC33FJ16GP304 ALU is 16 bits wide and is 3. 16-bit signed/16-bit signed divide
capable of addition, subtraction, bit shifts and logic 4. 16-bit unsigned/16-bit unsigned divide
operations. Unless otherwise mentioned, arithmetic The quotient for all divide instructions ends up in W0
operations are 2’s complement in nature. Depending and the remainder in W1. 16-bit signed and unsigned
on the operation, the ALU can affect the values of the DIV instructions can specify any W register for both the
Carry (C), Zero (Z), Negative (N), Overflow (OV) and 16-bit divisor (Wn) and any W register (aligned) pair
Digit Carry (DC) Status bits in the SR register. The C (W(m+1):Wm) for the 32-bit dividend. The divide
and DC Status bits operate as Borrow and Digit Borrow algorithm takes one cycle per bit of divisor, so both
bits, respectively, for subtraction operations. 32-bit/16-bit and 16-bit/16-bit instructions take the
The ALU can perform 8-bit or 16-bit operations, same number of cycles to execute.
depending on the mode of the instruction that is used.
Data for the ALU operation can come from the W 2.6 DSP Engine
register array or data memory, depending on the The DSP engine consists of a high-speed 17-bit x
addressing mode of the instruction. Likewise, output 17-bit multiplier, a barrel shifter and a 40-bit
data from the ALU can be written to the W register array adder/subtracter (with two target accumulators, round
or a data memory location. and saturation logic).
The dsPIC33FJ32GP202/204 and The dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
dsPIC33FJ16GP304 CPU incorporates hardware is a single-cycle instruction flow architecture; therefore,
support for both multiplication and division. This concurrent operation of the DSP engine with MCU
includes a dedicated hardware multiplier and support instruction flow is not possible. However, some MCU
hardware for 16-bit-divisor division. ALU and DSP engine resources can be used
Refer to the “dsPIC30F/33F Programmer’s Reference concurrently by the same instruction (e.g., ED, EDAC).
Manual” (DS70157) for information on the SR bits The DSP engine can also perform
affected by each instruction. accumulator-to-accumulator operations that require no
additional data. These instructions are ADD, SUB and
2.5.1 MULTIPLIER NEG.
Using the high-speed 17-bit x 17-bit multiplier of the DSP The DSP engine has options selected through bits in
engine, the ALU supports unsigned, signed or mixed-sign the CPU Core Control register (CORCON), as listed
operation in several MCU multiplication modes: below:
• 16-bit x 16-bit signed • Fractional or integer DSP multiply (IF)
• 16-bit x 16-bit unsigned • Signed or unsigned DSP multiply (US)
• 16-bit signed x 5-bit (literal) unsigned • Conventional or convergent rounding (RND)
• 16-bit unsigned x 16-bit unsigned • Automatic saturation on/off for AccA (SATA),
• 16-bit unsigned x 5-bit (literal) unsigned AccB (SATB) and writes to data memory
• 16-bit unsigned x 16-bit signed (SATDW)
• 8-bit unsigned x 8-bit unsigned • Accumulator Saturation mode selection
(ACCSAT)
2.5.2 DIVIDER
A block diagram of the DSP engine is shown in
The divide block supports 32-bit/16-bit and 16-bit/16-bit
Figure 2-3.
signed and unsigned integer divide operations with the
following data sizes:

TABLE 2-1: DSP INSTRUCTIONS SUMMARY

Instruction Algebraic Operation ACC Write Back
CLR A=0 Yes
ED A = (x - y)2 No
EDAC A = A + (x - y)2 No
MAC A = A + (x * y) Yes
MAC A = A + x2 No
MOVSAC No change in A Yes
MPY A=x*y No
MPY A=x2 No
MPY.N A=-x*y No
MSC A=A-x*y Yes

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 21

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

FIGURE 2-3: DSP ENGINE BLOCK DIAGRAM

S
40 a
40-bit Accumulator A
40 Round t 16
40-bit Accumulator B u
Logic r
Carry/Borrow Out a
Saturate t
e
Carry/Borrow In Adder

Negate

40 40 40

Barrel
16
Shifter

X Data Bus
40

Sign-Extend
Y Data Bus

32 16
Zero Backfill
33 32

17-bit
Multiplier/Scaler

16 16

To/From W Array

DS70290B-page 22 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
2.6.1 MULTIPLIER • In the case of addition, the Carry/Borrow input is
active-high and the other input is true data (not
The 17-bit x 17-bit multiplier is capable of signed or
complemented).
unsigned operation and can multiplex its output using a
scaler to support either 1.31 fractional (Q31) or 32-bit • In the case of subtraction, the Carry/Borrow input
integer results. Unsigned operands are zero-extended is active-low and the other input is complemented.
into the 17th bit of the multiplier input value. Signed The adder/subtracter generates Overflow Status bits,
operands are sign-extended into the 17th bit of the SA/SB and OA/OB, which are latched and reflected in
multiplier input value. The output of the 17-bit x 17-bit the STATUS
multiplier/scaler is a 33-bit value that is sign-extended register:
to 40 bits. Integer data is inherently represented as a
• Overflow from bit 39: this is a catastrophic
signed 2’s complement value, where the Most
overflow in which the sign of the accumulator is
Significant bit (MSb) is defined as a sign bit.
destroyed.
• The range of an N-bit 2’s complement integer is • Overflow into guard bits 32 through 39: this is a
-2N-1 to 2N-1 - 1. recoverable overflow. This bit is set whenever all
• For a 16-bit integer, the data range is -32768 the guard bits are not identical to each other.
(0x8000) to 32767 (0x7FFF) including ‘0’.
The adder has an additional saturation block that
• For a 32-bit integer, the data range is controls accumulator data saturation, if selected. It
-2,147,483,648 (0x8000 0000) to 2,147,483,647 uses the result of the adder, the Overflow Status bits
(0x7FFF FFFF). described previously and the SAT<A:B>
When the multiplier is configured for fractional (CORCON<7:6>) and ACCSAT (CORCON<4>) mode
multiplication, the data is represented as a 2’s control bits to determine when and to what value to
complement fraction, where the MSb is defined as a saturate.
sign bit and the radix point is implied to lie just after the Six STATUS register bits have been provided to
sign bit (QX format). The range of an N-bit 2’s support saturation and overflow:
complement fraction with this implied radix point is -1.0
to (1 - 21-N). For a 16-bit fraction, the Q15 data range is • OA: AccA overflowed into guard bits
-1.0 (0x8000) to 0.999969482 (0x7FFF) including ‘0’ • OB: AccB overflowed into guard bits
and has a precision of 3.01518x10-5. In Fractional • SA: AccA saturated (bit 31 overflow and
mode, the 16 x 16 multiply operation generates a 1.31 saturation)
product that has a precision of 4.65661 x 10-10. or
The same multiplier is used to support the MCU AccA overflowed into guard bits and saturated (bit
multiply instructions which include integer 16-bit 39 overflow and saturation)
signed, unsigned and mixed sign multiply operations. • SB: AccB saturated (bit 31 overflow and
saturation)
The MUL instruction can be directed to use byte or word
or
sized operands. Byte operands will direct a 16-bit
AccB overflowed into guard bits and saturated (bit
result, and word operands will direct a 32-bit result to
39 overflow and saturation)
the specified register(s) in the W array.
• OAB: Logical OR of OA and OB
2.6.2 DATA ACCUMULATORS AND • SAB: Logical OR of SA and SB
ADDER/SUBTRACTER The OA and OB bits are modified each time data
The data accumulator consists of a 40-bit passes through the adder/subtracter. When set, they
adder/subtracter with automatic sign extension logic. It indicate that the most recent operation has overflowed
can select one of two accumulators (A or B) as its into the accumulator guard bits (bits 32 through 39).
pre-accumulation source and post-accumulation The OA and OB bits can also optionally generate an
destination. For the ADD and LAC instructions, the data arithmetic warning trap when set and the
to be accumulated or loaded can be optionally scaled corresponding Overflow Trap Flag Enable bits (OVATE,
using the barrel shifter prior to accumulation. OVBTE) in the INTCON1 register are set (refer to
Section 6.0 “Interrupt Controller”). This allows the
2.6.2.1 Adder/Subtracter, Overflow and user application to take immediate action, for example,
Saturation to correct system gain.
The adder/subtracter is a 40-bit adder with an optional
zero input into one side, and either true or complement
data into the other input.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 23

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

The SA and SB bits are modified each time data into data space memory. The write is performed across
passes through the adder/subtracter, but can only be the X bus into combined X and Y address space. The
cleared by the user application. When set, they indicate following addressing modes are supported:
that the accumulator has overflowed its maximum • W13, Register Direct:
range (bit 31 for 32-bit saturation or bit 39 for 40-bit The rounded contents of the non-target
saturation) and will be saturated (if saturation is accumulator are written into W13 as a
enabled). When saturation is not enabled, SA and SB 1.15 fraction.
default to bit 39 overflow and thus indicate that a
• [W13]+ = 2, Register Indirect with Post-Increment:
catastrophic overflow has occurred. If the COVTE bit in
The rounded contents of the non-target
the INTCON1 register is set, SA and SB bits will
accumulator are written into the address pointed
generate an arithmetic warning trap when saturation is
to by W13 as a 1.15 fraction. W13 is then
disabled.
incremented by 2 (for a word write).
The Overflow and Saturation Status bits can optionally
be viewed in the STATUS Register (SR) as the logical 2.6.2.3 Round Logic
OR of OA and OB (in bit OAB) and the logical OR of SA
The round logic is a combinational block that performs
and SB (in bit SAB). Programs can check one bit in the
a conventional (biased) or convergent (unbiased)
STATUS register to determine if either accumulator has
round function during an accumulator write (store). The
overflowed, or one bit to determine if either
Round mode is determined by the state of the RND bit
accumulator has saturated. This is useful for complex
in the CORCON register. It generates a 16-bit, 1.15
number arithmetic, which typically uses both
data value that is passed to the data space write
accumulators.
saturation logic. If rounding is not indicated by the
The device supports three Saturation and Overflow instruction, a truncated 1.15 data value is stored and
modes: the least significant word (lsw) is simply discarded.
• Bit 39 Overflow and Saturation: Conventional rounding zero-extends bit 15 of the
When bit 39 overflow and saturation occurs, the accumulator and adds it to the ACCxH word (bits 16
saturation logic loads the maximally positive 9.31 through 31 of the accumulator).
(0x7FFFFFFFFF) or maximally negative 9.31 value
• If the ACCxL word (bits 0 through 15 of the
(0x8000000000) into the target accumulator. The
accumulator) is between 0x8000 and 0xFFFF
SA or SB bit is set and remains set until cleared by
(0x8000 included), ACCxH is incremented.
the user application. This condition is referred to as
‘super saturation’ and provides protection against • If ACCxL is between 0x0000 and 0x7FFF, ACCxH
erroneous data or unexpected algorithm problems is left unchanged.
(such as gain calculations). A consequence of this algorithm is that over a
• Bit 31 Overflow and Saturation: succession of random rounding operations, the value
When bit 31 overflow and saturation occurs, the tends to be biased slightly positive.
saturation logic then loads the maximally positive Convergent (or unbiased) rounding operates in the
1.31 value (0x007FFFFFFF) or maximally same manner as conventional rounding, except when
negative 1.31 value (0x0080000000) into the ACCxL equals 0x8000. In this case, the Least
target accumulator. The SA or SB bit is set and Significant bit (bit 16 of the accumulator) of ACCxH is
remains set until cleared by the user application. examined.
When this Saturation mode is in effect, the guard
• If it is ‘1’, ACCxH is incremented.
bits are not used, so the OA, OB or OAB bits are
never set. • If it is ‘0’, ACCxH is not modified. Assuming that
bit 16 is effectively random in nature, this scheme
• Bit 39 Catastrophic Overflow:
removes any rounding bias that may accumulate.
The bit 39 Overflow Status bit from the adder is
used to set the SA or SB bit, which remains set The SAC and SAC.R instructions store either a
until cleared by the user application. No saturation truncated (SAC), or rounded (SAC.R) version of the
operation is performed and the accumulator is contents of the target accumulator to data memory via
allowed to overflow, destroying its sign. If the the X bus, subject to data saturation (see
COVTE bit in the INTCON1 register is set, a Section 2.6.2.4 “Data Space Write Saturation”). For
catastrophic overflow can initiate a trap exception. the MAC class of instructions, the accumulator
write-back operation functions in the same manner,
2.6.2.2 Accumulator ‘Write Back’ addressing combined MCU (X and Y) data space
The MAC class of instructions (with the exception of though the X bus. For this class of instructions, the data
MPY, MPY.N, ED and EDAC) can optionally write a is always subject to rounding.
rounded version of the high word (bits 31 through 16)
of the accumulator that is not targeted by the instruction

DS70290B-page 24 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
2.6.2.4 Data Space Write Saturation 2.6.3 BARREL SHIFTER
In addition to adder/subtracter saturation, writes to data The barrel shifter can perform up to 16-bit arithmetic or
space can also be saturated but without affecting the logic right shifts, or up to 16-bit left shifts in a single
contents of the source accumulator. The data space cycle. The source can be either of the two DSP
write saturation logic block accepts a 16-bit, 1.15 accumulators or the X bus (to support multi-bit shifts of
fractional value from the round logic block as its input, register or memory data).
together with overflow status from the original source The shifter requires a signed binary value to determine
(accumulator) and the 16-bit round adder. These inputs both the magnitude (number of bits) and direction of the
are combined and used to select the appropriate 1.15 shift operation. A positive value shifts the operand right.
fractional value as output to write to data space A negative value shifts the operand left. A value of ‘0’
memory. does not modify the operand.
If the SATDW bit in the CORCON register is set, data The barrel shifter is 40 bits wide, thereby obtaining a
(after rounding or truncation) is tested for overflow and 40-bit result for DSP shift operations and a 16-bit result
adjusted accordingly: for MCU shift operations. Data from the X bus is
• For input data greater than 0x007FFF, data writ- presented to the barrel shifter between bit positions 16
ten to memory is forced to the maximum positive and 31 for right shifts, and between bit positions 0 and
1.15 value, 0x7FFF. 16 for left shifts.
• For input data less than 0xFF8000, data written to
memory is forced to the maximum negative 1.15
value, 0x8000.
The Most significant bit of the source (bit 39) is used to
determine the sign of the operand being tested.
If the SATDW bit in the CORCON register is not set, the
input data is always passed through unmodified under
all conditions.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 25

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

NOTES:

DS70290B-page 26 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
3.0 MEMORY ORGANIZATION 3.1 Program Address Space
The program address memory space of the
Note: This data sheet summarizes the features
dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
of the dsPIC33FJ32GP202/204 and
devices is 4M instructions. The space is addressable by a
dsPIC33FJ16GP304 family of devices. It
24-bit value derived either from the 23-bit Program Counter
is not intended to be a comprehensive
(PC) during program execution, or from table operation
reference source. To complement the
or data space remapping as described in Section 3.6
information in this data sheet, refer to the
“Interfacing Program and Data Memory Spaces”.
dsPIC33F Family Reference Manual,
“Section 4. Program Memory” User application access to the program memory space is
(DS70202), which is available from the restricted to the lower half of the address range (0x000000
Microchip website (www.microchip.com). to 0x7FFFFF). The exception is the use of TBLRD/TBLWT
operations, which use TBLPAG<7> to permit access to the
The dsPIC33FJ32GP202/204 and Configuration bits and Device ID sections of the
dsPIC33FJ16GP304 architecture features separate configuration memory space.
program and data memory spaces and buses. This
architecture also allows the direct access of program The memory maps for the dsPIC33FJ32GP202/204 and
memory from the data space during code execution. dsPIC33FJ16GP304 devices are shown in Figure 3-1.

FIGURE 3-1: PROGRAM MEMORY FOR dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

DEVICES

dsPIC33FJ32GP202/204 dsPIC33FJ16GP304
GOTO Instruction 0x000000 GOTO Instruction 0x000000
0x000002 0x000002
Reset Address 0x000004 Reset Address 0x000004
Interrupt Vector Table 0x0000FE Interrupt Vector Table 0x0000FE
Reserved 0x000100 Reserved 0x000100
0x000104 0x000104
Alternate Vector Table 0x0001FE Alternate Vector Table 0x0001FE
0x000200 0x000200
User Program User Program
Flash Memory Flash Memory
User Memory Space

User Memory Space

(11264 instructions) (5632 instructions)

0x0057FE 0x002BFE
0x005800 0x002C00

Unimplemented Unimplemented
(Read ‘0’s) (Read ‘0’s)

0x7FFFFE 0x7FFFFE
0x800000 0x800000

Reserved Reserved
Configuration Memory Space

Configuration Memory Space

0xF7FFFE 0xF7FFFE
Device Configuration 0xF80000 Device Configuration 0xF80000
Registers 0xF80017 Registers 0xF80017
0xF80018 0xF80018

Reserved Reserved

0xFEFFFE 0xFEFFFE
0xFF0000 0xFF0000
DEVID (2) 0xFFFFFE
DEVID (2) 0xFFFFFE

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 27

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

3.1.1 PROGRAM MEMORY 3.1.2 INTERRUPT AND TRAP VECTORS

ORGANIZATION All dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
The program memory space is organized in devices reserve the addresses between 0x00000 and
word-addressable blocks. Although it is treated as 0x000200 for hard-coded program execution vectors.
24 bits wide, it is more appropriate to think of each A hardware Reset vector is provided to redirect code
address of the program memory as a lower and upper execution from the default value of the PC on device
word, with the upper byte of the upper word being Reset to the actual start of code. A GOTO instruction is
unimplemented. The lower word always has an even programmed by the user application at 0x000000, with
address, while the upper word has an odd address the actual address for the start of code at 0x000002.
(Figure 3-2). dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
Program memory addresses are always word-aligned devices also have two interrupt vector tables, located
on the lower word, and addresses are incremented or from 0x000004 to 0x0000FF and 0x000100 to
decremented by two during code execution. This 0x0001FF. These vector tables allow each of the many
arrangement provides compatibility with data memory device interrupt sources to be handled by separate
space addressing and makes data in the program Interrupt Service Routines (ISRs). A more detailed
memory space accessible. discussion of the interrupt vector tables is provided in
Section 6.1 “Interrupt Vector Table”.

FIGURE 3-2: PROGRAM MEMORY ORGANIZATION

msw most significant word least significant word PC Address

Address (lsw Address)
23 16 8 0
0x000001 00000000 0x000000
0x000003 00000000 0x000002
0x000005 00000000 0x000004
0x000007 00000000 0x000006

Program Memory Instruction Width

‘Phantom’ Byte
(read as ‘0’)

DS70290B-page 28 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

3.2 Data Address Space All word accesses must be aligned to an even address.
Misaligned word data fetches are not supported, so
The dsPIC33FJ32GP202/204 and care must be taken when mixing byte and word
dsPIC33FJ16GP304 CPU has a separate 16-bit-wide operations, or translating from 8-bit MCU code. If a
data memory space. The data space is accessed using misaligned read or write is attempted, an address error
separate Address Generation Units (AGUs) for read trap is generated. If the error occurred on a read, the
and write operations. The data memory maps is shown instruction underway is completed. If the instruction
in Figure 3-3. occurred on a write, the instruction is executed but the
All Effective Addresses (EAs) in the data memory space write does not occur. In either case, a trap is then
are 16 bits wide and point to bytes within the data space. executed, allowing the system and/or user application
This arrangement gives a data space address range of to examine the machine state prior to execution of the
64 Kbytes or 32K words. The lower half of the data address Fault.
memory space (that is, when EA<15> = 0) is used for All byte loads into any W register are loaded into the
implemented memory addresses, while the upper half Least Significant Byte. The Most Significant Byte is not
(EA<15> = 1) is reserved for the Program Space modified.
Visibility area (see Section 3.6.3 “Reading Data From
Program Memory Using Program Space Visibility”). A sign-extend instruction (SE) is provided to allow
users to translate 8-bit signed data to 16-bit signed
dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 values. Alternatively, for 16-bit unsigned data, user
devices implement up to 30 Kbytes of data memory. applications can clear the MSB of any W register by
Should an EA point to a location outside of this area, an executing a zero-extend (ZE) instruction on the
all-zero word or byte will be returned. appropriate address.
3.2.1 DATA SPACE WIDTH 3.2.3 SFR SPACE
The data memory space is organized in byte The first 2 Kbytes of the Near Data Space, from 0x0000
addressable, 16-bit-wide blocks. Data is aligned in data to 0x07FF, is primarily occupied by Special Function
memory and registers as 16-bit words, but all data Registers (SFRs). These are used by the
space EAs resolve to bytes. The Least Significant dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
Bytes (LSBs) of each word have even addresses, while core and peripheral modules for controlling the
the Most Significant Bytes (MSBs) have odd operation of the device.
addresses.
SFRs are distributed among the modules that they
3.2.2 DATA MEMORY ORGANIZATION control, and are generally grouped together by module.
AND ALIGNMENT Much of the SFR space contains unused addresses;
these are read as ‘0’. A complete listing of implemented
To maintain backward compatibility with PIC® MCU SFRs, including their addresses, is shown in Table 3-1
devices and improve data space memory usage through Table 3-22.
efficiency, the dsPIC33FJ32GP202/204 and
dsPIC33FJ16GP304 instruction set supports both Note: The actual set of peripheral features and
word and byte operations. As a consequence of byte interrupts varies by the device. Refer to
accessibility, all effective address calculations are the corresponding device tables and
internally scaled to step through word-aligned memory. pinout diagrams for device-specific
For example, the core recognizes that Post-Modified information.
Register Indirect Addressing mode [Ws++] will result in
a value of Ws + 1 for byte operations and Ws + 2 for 3.2.4 NEAR DATA SPACE
word operations. The 8 Kbyte area between 0x0000 and 0x1FFF is
Data byte reads will read the complete word that referred to as the Near Data Space. Locations in this
contains the byte, using the LSB of any EA to space are directly addressable via a 13-bit absolute
determine which byte to select. The selected byte is address field within all memory direct instructions.
placed onto the LSB of the data path. That is, data Additionally, the whole data space is addressable using
memory and registers are organized as two parallel MOV instructions, which support Memory Direct
byte-wide entities with shared (word) address decode Addressing mode with a 16-bit address field, or by
but separate write lines. Data byte writes only write to using Indirect Addressing mode using a working
the corresponding side of the array or register that register as an address pointer.
matches the byte address.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 29

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

FIGURE 3-3: DATA MEMORY MAP FOR dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

DEVICES WITH 2 KB RAM

MSB LSB
Address 16 bits Address
MSb LSb
0x0001 0x0000
2 Kbyte
SFR Space
SFR Space 0x07FE
0x07FF
0x0801 0x0800
X Data RAM (X)
0x0BFF 0x0BFE
2 Kbyte 0x0001 0x0C00 8 Kbyte
Y Data RAM (Y) Near data space
SRAM Space 0x0FFF 0x0FFE
0x1001 0x1000

0x1FFF 0x1FFE
0x2001 0x2000

0x8001 0x8000

X Data
Optionally Unimplemented (X)
Mapped
into Program
Memory

0xFFFF 0xFFFE

DS70290B-page 30 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

3.2.5 X AND Y DATA SPACES The Y data space is used in concert with the X data
space by the MAC class of instructions (CLR, ED,
The core has two data spaces, X and Y. These data
EDAC, MAC, MOVSAC, MPY, MPY.N and MSC) to provide
spaces can be considered either separate (for some
two concurrent data read paths.
DSP instructions), or as one unified linear address
range (for MCU instructions). The data spaces are Both the X and Y data spaces support Modulo
accessed using two Address Generation Units (AGUs) Addressing mode for all instructions, subject to
and separate data paths. This feature allows certain addressing mode restrictions. Bit-Reversed Addressing
instructions to concurrently fetch two words from RAM, mode is only supported for writes to X data space.
thereby enabling efficient execution of DSP algorithms All data memory writes, including in DSP instructions,
such as Finite Impulse Response (FIR) filtering and view data space as combined X and Y address space.
Fast Fourier Transform (FFT). The boundary between the X and Y data spaces is
The X data space is used by all instructions and device-dependent and is not user-programmable.
supports all addressing modes. X data space has All effective addresses are 16 bits wide and point to
separate read and write data buses. The X read data bytes within the data space. Therefore, the data space
bus is the read data path for all instructions that view address range is 64 Kbytes, or 32K words, though the
data space as combined X and Y address space. It is implemented memory locations vary by device.
also the X data prefetch path for the dual operand DSP
instructions (MAC class).

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 31

DS70290B-page 32

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 3-1: CPU CORE REGISTERS MAP
SFR All
SFR Name Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Addr Resets

WREG0 0000 Working Register 0 0000

WREG1 0002 Working Register 1 0000
WREG2 0004 Working Register 2 0000
WREG3 0006 Working Register 3 0000
WREG4 0008 Working Register 4 0000
WREG5 000A Working Register 5 0000
WREG6 000C Working Register 6 0000
WREG7 000E Working Register 7 0000
WREG8 0010 Working Register 8 0000
WREG9 0012 Working Register 9 0000
WREG10 0014 Working Register 10 0000
WREG11 0016 Working Register 11 0000
WREG12 0018 Working Register 12 0000
WREG13 001A Working Register 13 0000
WREG14 001C Working Register 14 0000
Preliminary

WREG15 001E Working Register 15 0800

SPLIM 0020 Stack Pointer Limit Register xxxx
ACCAL 0022 Accumulator A Low Word Register 0000
ACCAH 0024 Accumulator A High Word Register 0000
ACCAU 0026 Accumulator A Upper Word Register 0000
ACCBL 0028 Accumulator B Low Word Register 0000
ACCBH 002A Accumulator B High Word Register 0000
ACCBU 002C Accumulator B Upper Word Register 0000
PCL 002E Program Counter Low Word Register 0000
PCH 0030 — — — — — — — — Program Counter High Byte Register 0000
TBLPAG 0032 — — — — — — — — Table Page Address Pointer Register 0000
PSVPAG 0034 — — — — — — — — Program Memory Visibility Page Address Pointer Register 0000
© 2008 Microchip Technology Inc.

RCOUNT 0036 Repeat Loop Counter Register xxxx

DCOUNT 0038 DCOUNT<15:0> xxxx
DOSTARTL 003A DOSTARTL<15:1> 0 xxxx
DOSTARTH 003C — — — — — — — — — — DOSTARTH<5:0> 00xx
DOENDL 003E DOENDL<15:1> 0 xxxx
DOENDH 0040 — — — — — — — — — — DOENDH 00xx
SR 0042 OA OB SA SB OAB SAB DA DC IPL2 IPL1 IPL0 RA N OV Z C 0000
CORCON 0044 — — — US EDT DL<2:0> SATA SATB SATDW ACCSAT IPL3 PSV RND IF 0020
MODCON 0046 XMODEN YMODEN — — BWM<3:0> YWM<3:0> XWM<3:0> 0000
Legend: x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
 TABLE 3-1: CPU CORE REGISTERS MAP (CONTINUED)
© 2008 Microchip Technology Inc.

SFR All
SFR Name Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Addr Resets
XMODSRT 0048 XS<15:1> 0 xxxx
XMODEND 004A XE<15:1> 1 xxxx

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

YMODSRT 004C YS<15:1> 0 xxxx
YMODEND 004E YE<15:1> 1 xxxx
XBREV 0050 BREN XB<14:0> xxxx
DISICNT 0052 — — Disable Interrupts Counter Register xxxx
Legend: x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.

TABLE 3-2: CHANGE NOTIFICATION REGISTER MAP FOR dsPIC33FJ32GP202

SFR SFR All
Name Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Addr Resets

CNEN1 0060 CN15IE CN14IE CN13IE CN12IE CN11IE —- — — CN7IE CN6IE CN5IE CN4IE CN3IE CN2IE CN1IE CN0IE 0000
CNEN2 0062 — CN30IE CN29IE — CN27IE — — CN24IE CN23IE CN22IE CN21IE — — — — CN16IE 0000
CNPU1 0068 CN15PUE CN14PUE CN13PUE CN12PUE CN11PUE — — — CN7PUE CN6PUE CN5PUE CN4PUE CN3PUE CN2PUE CN1PUE CN0PUE 0000
CNPU2 006A — CN30PUE CN29PUE — CN27PUE — — CN24PUE CN23PUE CN22PUE CN21PUE — — — — CN16PUE 0000
Preliminary

Legend: x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.

TABLE 3-3: CHANGE NOTIFICATION REGISTER MAP FOR dsPIC33FJ32GP204 AND dsPIC33FJ16GP304
SFR SFR All
Name Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Addr Resets

CNEN1 0060 CN15IE CN14IE CN13IE CN12IE CN11IE CN10IE CN9IE CN8IE CN7IE CN6IE CN5IE CN4IE CN3IE CN2IE CN1IE CN0IE 0000
CNEN2 0062 — CN30IE CN29IE CN28IE CN27IE CN26IE CN25IE CN24IE CN23IE CN22IE CN21IE CN20IE CN19IE CN18IE CN17IE CN16IE 0000
CNPU1 0068 CN15PUE CN14PUE CN13PUE CN12PUE CN11PUE CN10PUE CN9PUE CN8PUE CN7PUE CN6PUE CN5PUE CN4PUE CN3PUE CN2PUE CN1PUE CN0PUE 0000
CNPU2 006A — CN30PUE CN29PUE CN28PUE CN27PUE CN26PUE CN25PUE CN24PUE CN23PUE CN22PUE CN21PUE CN20PUE CN19PUE CN18PUE CN17PUE CN16PUE 0000
Legend: x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
DS70290B-page 33
DS70290B-page 34

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 3-4: INTERRUPT CONTROLLER REGISTER MAP
SFR SFR All
Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Name Addr Resets

INTCON1 0080 NSTDIS OVAERR OVBERR COVAERR COVBERR OVATE OVBTE COVTE SFTACERR DIV0ERR — MATHERR ADDRERR STKERR OSCFAIL — 0000
INTCON2 0082 ALTIVT DISI — — — — — — — — — — — INT2EP INT1EP INT0EP 0000
IFS0 0084 — — AD1IF U1TXIF U1RXIF SPI1IF SPI1EIF T3IF T2IF OC2IF IC2IF — T1IF OC1IF IC1IF INT0IF 0000
IFS1 0086 — — INT2IF — — — — — IC8IF IC7IF — INT1IF CNIF — MI2C1IF SI2C1IF 0000
IFS4 008C — — — — — — — — — — — — — — U1EIF — 0000
IEC0 0094 — — AD1IE U1TXIE U1RXIE SPI1IE SPI1EIE T3IE T2IE OC2IE IC2IE — T1IE OC1IE IC1IE INT0IE 0000
IEC1 0096 — — INT2IE — — — — — IC8IE IC7IE — INT1IE CNIE — MI2C1IE SI2C1IE 0000
IEC4 009C — — — — — — — — — — — — — — U1EIE — 0000
IPC0 00A4 — T1IP<2:0> — OC1IP<2:0> — IC1IP<2:0> — INT0IP<2:0> 4444
IPC1 00A6 — T2IP<2:0> — OC2IP<2:0> — IC2IP<2:0> — — — — 4440
IPC2 00A8 — U1RXIP<2:0> — SPI1IP<2:0> — SPI1EIP<2:0> — T3IP<2:0> 4444
IPC3 00AA — — — — — — — — — AD1IP<2:0> — U1TXIP<2:0> 0044
IPC4 00AC — CNIP<2:0> — — — — — MI2C1IP<2:0> — SI2C1IP<2:0> 4044
IPC5 00AE — IC8IP<2:0> — IC7IP<2:0> — — — — — INT1IP<2:0> 4404
IPC7 00B2 — — — — — — — — — INT2IP<2:0> — — — — 0040
Preliminary

IPC16 00C4 — — — — — — — — — U1EIP<2:0> — — — — 0040

INTTREG 00E0 — — — — ILR<3:0> — VECNUM<6:0> 0000
Legend: x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
© 2008 Microchip Technology Inc.
© 2008 Microchip Technology Inc.

TABLE 3-5: TIMER REGISTER MAP

SFR Name SFR All
Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Addr Resets

TMR1 0100 Timer1 Register xxxx

PR1 0102 Period Register 1 FFFF

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

T1CON 0104 TON — TSIDL — — — — — — TGATE TCKPS<1:0> — TSYNC TCS — 0000
TMR2 0106 Timer2 Register xxxx
TMR3HLD 0108 Timer3 Holding Register (for 32-bit timer operations only) xxxx
TMR3 010A Timer3 Register xxxx
PR2 010C Period Register 2 FFFF
PR3 010E Period Register 3 FFFF
T2CON 0110 TON — TSIDL — — — — — — TGATE TCKPS<1:0> T32 — TCS — 0000
T3CON 0112 TON — TSIDL — — — — — — TGATE TCKPS<1:0> — — TCS — 0000
Legend: x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.

TABLE 3-6: INPUT CAPTURE REGISTER MAP

SFR All
Preliminary

SFR Name Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Addr Resets

IC1BUF 0140 Input 1 Capture Register xxxx

IC1CON 0142 — — ICSIDL — — — — — ICTMR ICI<1:0> ICOV ICBNE ICM<2:0> 0000
IC2BUF 0144 Input 2 Capture Register xxxx
IC2CON 0146 — — ICSIDL — — — — — ICTMR ICI<1:0> ICOV ICBNE ICM<2:0> 0000
IC7BUF 0158 Input 7 Capture Register xxxx
IC7CON 015A — — ICSIDL — — — — — ICTMR ICI<1:0> ICOV ICBNE ICM<2:0> 0000
IC8BUF 015C Input 8 Capture Register xxxx
IC8CON 015E — — ICSIDL — — — — — ICTMR ICI<1:0> ICOV ICBNE ICM<2:0> 0000
Legend: x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.

TABLE 3-7: OUTPUT COMPARE REGISTER MAP

SFR All
SFR Name Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Addr Resets

OC1RS 0180 Output Compare 1 Secondary Register xxxx

OC1R 0182 Output Compare 1 Register xxxx
DS70290B-page 35

OC1CON 0184 — — OCSIDL — — — — — — — — OCFLT OCTSEL OCM<2:0> 0000

OC2RS 0186 Output Compare 2 Secondary Register xxxx
OC2R 0188 Output Compare 2 Register xxxx
OC2CON 018A — — OCSIDL — — — — — — — — OCFLT OCTSEL OCM<2:0> 0000
Legend: x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
DS70290B-page 36

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 3-8: I2C1 REGISTER MAP
SFR All
SFR Name Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Addr Resets

I2C1RCV 0200 — — — — — — — — Receive Register 0000

I2C1TRN 0202 — — — — — — — — Transmit Register 00FF
I2C1BRG 0204 — — — — — — — Baud Rate Generator Register 0000
I2C1CON 0206 I2CEN — I2CSIDL SCLREL IPMIEN A10M DISSLW SMEN GCEN STREN ACKDT ACKEN RCEN PEN RSEN SEN 1000
I2C1STAT 0208 ACKSTAT TRSTAT — — — BCL GCSTAT ADD10 IWCOL I2COV D_A P S R_W RBF TBF 0000
I2C1ADD 020A — — — — — — Address Register 0000
I2C1MSK 020C — — — — — — Address Mask Register 0000
Legend: x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.

TABLE 3-9: UART1 REGISTER MAP

SFR All
SFR Name Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Addr Resets

U1MODE 0220 UARTEN — USIDL IREN RTSMD — UEN1 UEN0 WAKE LPBACK ABAUD URXINV BRGH PDSEL<1:0> STSEL 0000
U1STA 0222 UTXISEL1 UTXINV UTXISEL0 — UTXBRK UTXEN UTXBF TRMT URXISEL<1:0> ADDEN RIDLE PERR FERR OERR URXDA 0110
Preliminary

U1TXREG 0224 — — — — — — — UART Transmit Register xxxx

U1RXREG 0226 — — — — — — — UART Receive Register 0000
U1BRG 0228 Baud Rate Generator Prescaler 0000
Legend: x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.

TABLE 3-10: SPI1 REGISTER MAP

SFR SFR All
Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Name Addr Resets

SPI1STAT 0240 SPIEN — SPISIDL — — — — — — SPIROV — — — — SPITBF SPIRBF 0000

SPI1CON1 0242 — — — DISSCK DISSDO MODE16 SMP CKE SSEN CKP MSTEN SPRE<2:0> PPRE<1:0> 0000
SPI1CON2 0244 FRMEN SPIFSD FRMPOL — — — — — — — — — — — FRMDLY — 0000
SPI1BUF 0248 SPI1 Transmit and Receive Buffer Register 0000
© 2008 Microchip Technology Inc.

Legend: x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
 TABLE 3-11: PERIPHERAL PIN SELECT INPUT REGISTER MAP
© 2008 Microchip Technology Inc.

File All
Addr Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Name Resets

RPINR0 0680 — — — INT1R<4:0> — — — — — — — — 1F00

RPINR1 0682 — — — — — — — — — — — INT2R<4:0> 001F

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

RPINR3 0686 — — — T3CKR<4:0> — — — T2CKR<4:0> 1F1F
RPINR7 068E — — — IC2R<4:0> — — — IC1R<4:0> 1F1F
RPINR10 0694 — — — IC8R<4:0> — — — IC7R<4:0> 1F1F
RPINR11 0696 — — — — — — — — — — — OCFAR<4:0> 001F
RPINR18 06A4 — — — U1CTSR<4:0> — — — U1RX<R4:0> 1F1F
RPINR20 06A8 — — — SCK1R<4:0> — — — SDI1R<4:0> 1F1F
RPINR21 06AA — — — — — — — — — — — SS1R<4:0> 001F
Legend: x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.

TABLE 3-12: PERIPHERAL PIN SELECT OUTPUT REGISTER MAP FOR dsPIC33FJ32GP202
File All
Preliminary

Addr Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Name Resets

RPOR0 06C0 — — — RP1R<4:0> — — — RP0R<4:0> 0000

RPOR1 06C2 — — — RP3R<4:0> — — — RP2R<4:0> 0000
RPOR2 06C4 — — — RP5R<4:0> — — — RP4R<4:0> 0000
RPOR3 06C6 — — — RP7R<4:0> — — — RP6R<4:0> 0000
RPOR4 06C8 — — — RP9R<4:0> — — — RP8R<4:0> 0000
RPOR5 06CA — — — RP11R<4:0> — — — RP10R<4:0> 0000
RPOR6 06CC — — — RP13R<4:0> — — — RP12R<4:0> 0000
RPOR7 06CE — — — RP15R<4:0> — — — RP14R<4:0> 0000
Legend: x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
DS70290B-page 37
DS70290B-page 38

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 3-13: PERIPHERAL PIN SELECT OUTPUT REGISTER MAP FOR dsPIC33FJ32GP204 AND dsPIC33FJ16GP304
All
File Name Addr Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Resets
RPOR0 06C0 — — — RP1R<4:0> — — — RP0R<4:0> 0000
RPOR1 06C2 — — — RP3R<4:0> — — — RP2R<4:0> 0000
RPOR2 06C4 — — — RP5R<4:0> — — — RP4R<4:0> 0000
RPOR3 06C6 — — — RP7R<4:0> — — — RP6R<4:0> 0000
RPOR4 06C8 — — — RP9R<4:0> — — — RP8R<4:0> 0000
RPOR5 06CA — — — RP11R<4:0> — — — RP10R<4:0> 0000
RPOR6 06CC — — — RP13R<4:0> — — — RP12R<4:0> 0000
RPOR7 06CE — — — RP15R<4:0> — — — RP14R<4:0> 0000
RPOR8 06D0 — — — RP17R<4:0> — — — RP16R<4:0> 0000
RPOR9 06D2 — — — RP19R<4:0> — — — RP18R<4:0> 0000
RPOR10 06D4 — — — RP21R<4:0> — — — RP20R<4:0> 0000
RPOR11 06D6 — — — RP23R<4:0> — — — RP22R<4:0> 0000
RPOR12 06D8 — — — RP25R<4:0> — — — RP24R<4:0> 0000
Legend: x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
Preliminary
© 2008 Microchip Technology Inc.
© 2008 Microchip Technology Inc.

TABLE 3-14: ADC1 REGISTER MAP FOR dsPIC33FJ32GP204 AND dsPIC33FJ16GP304

All
File Name Addr Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Resets

ADC1BUF0 0300 ADC Data Buffer 0 xxxx

ADC1BUF1 0302 ADC Data Buffer 1 xxxx

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

ADC1BUF2 0304 ADC Data Buffer 2 xxxx
ADC1BUF3 0306 ADC Data Buffer 3 xxxx
ADC1BUF4 0308 ADC Data Buffer 4 xxxx
ADC1BUF5 030A ADC Data Buffer 5 xxxx
ADC1BUF6 030C ADC Data Buffer 6 xxxx
ADC1BUF7 030E ADC Data Buffer 7 xxxx
ADC1BUF8 0310 ADC Data Buffer 8 xxxx
ADC1BUF9 0312 ADC Data Buffer 9 xxxx
ADC1BUFA 0314 ADC Data Buffer 10 xxxx
ADC1BUFB 0316 ADC Data Buffer 11 xxxx
ADC1BUFC 0318 ADC Data Buffer 12 xxxx
Preliminary

ADC1BUFD 031A ADC Data Buffer 13 xxxx

ADC1BUFE 031C ADC Data Buffer 14 xxxx
ADC1BUFE 031E ADC Data Buffer 15 xxxx
AD1CON1 0320 ADON — ADSIDL — — AD12B FORM<1:0> SSRC<2:0> — SIMSAM ASAM SAMP DONE 0000
AD1CON2 0322 VCFG<2:0> — — CSCNA CHPS<1:0> BUFS — SMPI<3:0> BUFM ALTS 0000
AD1CON3 0324 ADRC — — SAMC<4:0> ADCS<7:0> 0000
AD1CHS123 0326 — — — — — CH123NB<1:0> CH123SB — — — — — CH123NA<1:0> CH123SA 0000
AD1CHS0 0328 CH0NB — — CH0SB<4:0> CH0NA — — CH0SA<4:0> 0000
AD1PCFGL 032C — — — PCFG12 PCFG11 PCFG10 PCFG9 PCFG8 PCFG7 PCFG6 PCFG5 PCFG4 PCFG3 PCFG2 PCFG1 PCFG0 0000
AD1CSSL 0330 — — — CSS12 CSS11 CSS10 CSS9 CSS8 CSS7 CSS6 CSS5 CSS4 CSS3 CSS2 CSS1 CSS0 0000
Legend: x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
DS70290B-page 39
DS70290B-page 40

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 3-15: ADC1 REGISTER MAP FOR dsPIC33FJ32GP202
All
File Name Addr Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Resets

ADC1BUF0 0300 ADC Data Buffer 0 xxxx

ADC1BUF1 0302 ADC Data Buffer 1 xxxx
ADC1BUF2 0304 ADC Data Buffer 2 xxxx
ADC1BUF3 0306 ADC Data Buffer 3 xxxx
ADC1BUF4 0308 ADC Data Buffer 4 xxxx
ADC1BUF5 030A ADC Data Buffer 5 xxxx
ADC1BUF6 030C ADC Data Buffer 6 xxxx
ADC1BUF7 030E ADC Data Buffer 7 xxxx
ADC1BUF8 0310 ADC Data Buffer 8 xxxx
ADC1BUF9 0312 ADC Data Buffer 9 xxxx
ADC1BUFA 0314 ADC Data Buffer 10 xxxx
ADC1BUFB 0316 ADC Data Buffer 11 xxxx
ADC1BUFC 0318 ADC Data Buffer 12 xxxx
Preliminary

ADC1BUFD 031A ADC Data Buffer 13 xxxx

ADC1BUFE 031C ADC Data Buffer 14 xxxx
ADC1BUFF 031E ADC Data Buffer 15 xxxx
AD1CON1 0320 ADON — ADSIDL — — AD12B FORM<1:0> SSRC<2:0> — SIMSAM ASAM SAMP DONE 0000
AD1CON2 0322 VCFG<2:0> — — CSCNA CHPS<1:0> BUFS — SMPI<3:0> BUFM ALTS 0000
AD1CON3 0324 ADRC — — SAMC<4:0> ADCS<7:0> 0000
AD1CHS123 0326 — — — — — CH123NB<1:0> CH123SB — — — — — CH123NA<1:0> CH123SA 0000
AD1CHS0 0328 CH0NB — — CH0SB<4:0> CH0NA — — CH0SA<4:0> 0000
AD1PCFGL 032C — — — PCFG12 PCFG11 PCFG10 PCFG9 — — — PCFG5 PCFG4 PCFG3 PCFG2 PCFG1 PCFG0 0000
AD1CSSL 0330 — — — CSS12 CSS11 CSS10 CSS9 — — — CSS5 CSS4 CSS3 CSS2 CSS1 CSS0 0000
Legend: x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
© 2008 Microchip Technology Inc.
© 2008 Microchip Technology Inc.

TABLE 3-16: PORTA REGISTER MAP FOR dsPIC33FJ32GP202

All
File Name Addr Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Resets

TRISA 02C0 — — — — — — — — — — — TRISA4 TRISA3 TRISA2 TRISA1 TRISA0 001F

PORTA 02C2 — — — — — — — — — — — RA4 RA3 RA2 RA1 RA0 xxxx

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

LATA 02C4 — — — — — — — — — — — LATA4 LATA3 LATA2 LATA1 LATA0 xxxx
ODCA 02C6 — — — — — — — — — — — ODCA4 ODCA3 ODCA2 ODCA1 ODCA0 xxxx
Legend: x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.

TABLE 3-17: PORTA REGISTER MAP FOR dsPIC33FJ32GP204 AND dsPIC33FJ16GP304

All
File Name Addr Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Resets

TRISA 02C0 — — — — — TRISA10 TRISA9 TRISA8 TRISA7 — — TRISA4 TRISA3 TRISA2 TRISA1 TRISA0 079F
PORTA 02C2 — — — — — RA10 RA9 RA8 RA7 — — RA4 RA3 RA2 RA1 RA0 xxxx
LATA 02C4 — — — — — LATA10 LATA9 LATA8 LATA7 — — LATA4 LATA3 LATA2 LATA1 LATA0 xxxx
ODCA 02C6 — — — — — ODCA10 ODCA9 ODCA8 ODCA7 — — ODCA4 ODCA3 ODCA2 ODCA1 ODCA0 xxxx
Legend: x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
Preliminary

TABLE 3-18: PORTB REGISTER MAP

All
File Name Addr Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Resets

TRISB 02C8 TRISB15 TRISB14 TRISB13 TRISB12 TRISB11 TRISB10 TRISB9 TRISB8 TRISB7 TRISB6 TRISB5 TRISB4 TRISB3 TRISB2 TRISB1 TRISB0 FFFF
PORTB 02CA RB15 RB14 RB13 RB12 RB11 RB10 RB9 RB8 RB7 RB6 RB5 RB4 RB3 RB2 RB1 RB0 xxxx
LATB 02CC LATB15 LATB14 LATB13 LATB12 LATB11 LATB10 LATB9 LATB8 LATB7 LATB6 LATB5 LATB4 LATB3 LATB2 LATB1 LATB0 xxxx
ODCB 02CE ODCB15 ODCB14 ODCB13 ODCB12 ODCB11 ODCB10 ODCB9 ODCB8 ODCB7 ODCB6 ODCB5 ODCB4 ODCB3 ODCB2 ODCB1 ODCB0 xxxx
Legend: x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.

TABLE 3-19: PORTC REGISTER MAP FOR dsPIC33FJ32GP204 AND dsPIC33FJ16GP304

All
File Name Addr Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Resets

TRISC 02D0 — — — — — — TRISC9 TRISC8 TRISC7 TRISC6 TRISC5 TRISC4 TRISC3 TRISC2 TRISC1 TRISC0 03FF
PORTC 02D2 — — — — — — RC9 RC8 RC7 RC6 RC5 RC4 RC4 RC2 RC1 RC0 xxxx
LATC 02D4 — — — — — — LATC9 LATC8 LATC7 LATC6 LATC5 LATC4 LATC4 LATC2 LATC1 LATC0 xxxx
DS70290B-page 41

ODCC 02D6 — — — — — — ODCC9 ODCC8 ODCC7 ODCC6 ODCC5 ODCC4 ODCC4 ODCC2 ODCC1 ODCC0 xxxx
Legend: x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
DS70290B-page 42

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 3-20: SYSTEM CONTROL REGISTER MAP
All
File Name Addr Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Resets

RCON 0740 TRAPR IOPUWR — — — — CM VREGS EXTR SWR SWDTEN WDTO SLEEP IDLE BOR POR xxxx(1)
OSCCON 0742 — COSC<2:0> — NOSC<2:0> CLKLOCK IOLOCK LOCK — CF — LPOSCEN OSWEN 0300(2)
CLKDIV 0744 ROI DOZE<2:0> DOZEN FRCDIV<2:0> PLLPOST<1:0> — PLLPRE<4:0> 3040
PLLFBD 0746 — — — — — — — PLLDIV<8:0> 0030
OSCTUN 0748 — — — — — — — — — — TUN<5:0> 0000
Legend: x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
Note 1: RCON register Reset values dependent on type of Reset.
2: OSCCON register Reset values dependent on the FOSC Configuration bits and by type of Reset.

TABLE 3-21: NVM REGISTER MAP

All
File Name Addr Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Resets

NVMCON 0760 WR WREN WRERR — — — — — — ERASE — — NVMOP<3:0> 0000(1)

NVMKEY 0766 — — — — — — — — NVMKEY<7:0> 0000
Preliminary

Legend: x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
Note 1: Reset value shown is for POR only. Value on other Reset states is dependent on the state of memory write or erase operations at the time of Reset.

TABLE 3-22: PMD REGISTER MAP

All
File Name Addr Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Resets

PMD1 0770 — — T3MD T2MD T1MD — — — I2C1MD — U1MD — SPI1MD — — AD1MD 0000
PMD2 0772 IC8MD IC7MD — — — — IC2MD IC1MD — — — — — — OC2MD OC1MD 0000
Legend: x = unknown value on Reset, — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
© 2008 Microchip Technology Inc.
 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

3.2.6 SOFTWARE STACK 3.2.7 DATA RAM PROTECTION FEATURE

In addition to its use as a working register, the W15 The dsPIC33F product family supports Data RAM
register in the dsPIC33FJ32GP202/204 and protection features that enable segments of RAM to be
dsPIC33FJ16GP304 devices is also used as a protected when used in conjunction with Boot and
software Stack Pointer. The Stack Pointer always Secure Code Segment Security. BSRAM (Secure RAM
points to the first available free word and grows from segment for BS) is accessible only from the Boot
lower to higher addresses. It pre-decrements for stack Segment Flash code when enabled. SSRAM (Secure
pops and post-increments for stack pushes, as shown RAM segment for RAM) is accessible only from the
in Figure 3-4. For a PC push during any CALL Secure Segment Flash code when enabled. See
instruction, the MSB of the PC is zero-extended before Table 3-1 for an overview of the BSRAM and SSRAM
the push, ensuring that the MSB is always clear. SFRs.
Note: A PC push during exception processing
concatenates the SRL register to the MSB 3.3 Instruction Addressing Modes
of the PC prior to the push. The addressing modes shown in Table 3-23 form the
The Stack Pointer Limit register (SPLIM) associated basis of the addressing modes optimized to support the
with the Stack Pointer sets an upper address boundary specific features of individual instructions. The
for the stack. SPLIM is uninitialized at Reset. As is the addressing modes provided in the MAC class of
case for the Stack Pointer, SPLIM<0> is forced to ‘0’ instructions differ from those in the other instruction
because all stack operations must be word-aligned. types.
When an EA is generated using W15 as a source or
3.3.1 FILE REGISTER INSTRUCTIONS
destination pointer, the resulting address is compared
with the value in SPLIM. If the contents of the Stack Most file register instructions use a 13-bit address field
Pointer (W15) and the SPLIM register are equal and a (f) to directly address data present in the first 8192
push operation is performed, a stack error trap will not bytes of data memory (Near Data Space). Most file
occur. The stack error trap will occur on a subsequent register instructions employ a working register, W0,
push operation. For example, to cause a stack error which is denoted as WREG in these instructions. The
trap when the stack grows beyond address 0x2000 in destination is typically either the same file register or
RAM, initialize the SPLIM with the value 0x1FFE. WREG (with the exception of the MUL instruction),
which writes the result to a register or register pair. The
Similarly, a Stack Pointer underflow (stack error) trap is
MOV instruction allows additional flexibility and can
generated when the Stack Pointer address is found to
access the entire data space.
be less than 0x0800. This prevents the stack from
interfering with the Special Function Register (SFR) 3.3.2 MCU INSTRUCTIONS
space.
The three-operand MCU instructions are of the form:
A write to the SPLIM register should not be immediately
followed by an indirect read operation using W15. Operand 3 = Operand 1 <function> Operand 2
where Operand 1 is always a working register (that is,
FIGURE 3-4: CALL STACK FRAME the addressing mode can only be register direct), which
is referred to as Wb. Operand 2 can be a W register,
0x0000 15 0 fetched from data memory, or a 5-bit literal. The result
location can be either a W register or a data memory
location. The following addressing modes are
supported by MCU instructions:
Stack Grows Toward
Higher Address

• Register Direct
PC<15:0> W15 (before CALL) • Register Indirect
000000000 PC<22:16> • Register Indirect Post-Modified
<Free Word> W15 (after CALL) • Register Indirect Pre-Modified
• 5-bit or 10-bit Literal
POP : [--W15]
PUSH : [W15++] Note: Not all instructions support all the
addressing modes given above. Individual
instructions can support different subsets
of these addressing modes.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 43

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 3-23: FUNDAMENTAL ADDRESSING MODES SUPPORTED

Addressing Mode Description
File Register Direct The address of the file register is specified explicitly.
Register Direct The contents of a register are accessed directly.
Register Indirect The contents of Wn forms the Effective Address (EA.)
Register Indirect Post-Modified The contents of Wn forms the EA. Wn is post-modified (incremented or
decremented) by a constant value.
Register Indirect Pre-Modified Wn is pre-modified (incremented or decremented) by a signed constant value
to form the EA.
Register Indirect with Register Offset The sum of Wn and Wb forms the EA.
(Register Indexed)
Register Indirect with Literal Offset The sum of Wn and a literal forms the EA.

3.3.3 MOVE AND ACCUMULATOR The two-source operand prefetch registers must be
INSTRUCTIONS members of the set {W8, W9, W10, W11}. For data
reads, W8 and W9 are always directed to the X RAGU,
Move instructions and the DSP accumulator class of
and W10 and W11 are always directed to the Y AGU.
instructions provide a greater degree of addressing
The effective addresses generated (before and after
flexibility than other instructions. In addition to the
modification) must, therefore, be valid addresses within
Addressing modes supported by most MCU
X data space for W8 and W9 and Y data space for W10
instructions, move and accumulator instructions also
and W11.
support Register Indirect with Register Offset
Addressing mode, also referred to as Register Indexed Note: Register Indirect with Register Offset
mode. Addressing mode is available only for W9
(in X space) and W11 (in Y space).
Note: For the MOV instructions, the addressing
mode specified in the instruction can differ In summary, the following addressing modes are
for the source and destination EA. supported by the MAC class of instructions:
However, the 4-bit Wb (Register Offset) • Register Indirect
field is shared by both source and
• Register Indirect Post-Modified by 2
destination (but typically only used by
one). • Register Indirect Post-Modified by 4
• Register Indirect Post-Modified by 6
In summary, the following addressing modes are
supported by move and accumulator instructions: • Register Indirect with Register Offset (Indexed)

• Register Direct 3.3.5 OTHER INSTRUCTIONS

• Register Indirect Besides the addressing modes outlined previously, some
• Register Indirect Post-modified instructions use literal constants of various sizes. For
• Register Indirect Pre-modified example, BRA (branch) instructions use 16-bit signed
• Register Indirect with Register Offset (Indexed) literals to specify the branch destination directly, whereas
• Register Indirect with Literal Offset the DISI instruction uses a 14-bit unsigned literal field. In
some instructions, such as ADD Acc, the source of an
• 8-bit Literal
operand or result is implied by the opcode itself. Certain
• 16-bit Literal operations, such as NOP, do not have any operands.
Note: Not all instructions support all the
addressing modes given above. Individual
instructions may support different subsets
of these addressing modes.

3.3.4 MAC INSTRUCTIONS

The dual source operand DSP instructions (CLR, ED,
EDAC, MAC, MPY, MPY.N, MOVSAC and MSC), also referred
to as MAC instructions, use a simplified set of addressing
modes to allow the user application to effectively
manipulate the data pointers through register indirect
tables.

DS70290B-page 44 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

3.4 Modulo Addressing Note: Y space Modulo Addressing EA

Modulo Addressing mode is a method of providing an calculations assume word sized data (LSB
automated means to support circular data buffers using of every EA is always clear).
hardware. The objective is to remove the need for The length of a circular buffer is not directly specified. It
software to perform data address boundary checks is determined by the difference between the
when executing tightly looped code, as is typical in corresponding start and end addresses. The maximum
many DSP algorithms. possible length of the circular buffer is 32K words
Modulo Addressing can operate in either data or program (64 Kbytes).
space (since the data pointer mechanism is essentially
the same for both). One circular buffer can be supported 3.4.2 W ADDRESS REGISTER
in each of the X (which also provides the pointers into SELECTION
program space) and Y data spaces. Modulo Addressing The Modulo and Bit-Reversed Addressing Control
can operate on any W register pointer. However, it is not register, MODCON<15:0>, contains enable flags as well
advisable to use W14 or W15 for Modulo Addressing as a W register field to specify the W Address registers.
since these two registers are used as the Stack Frame The XWM and YWM fields select the registers that will
Pointer and Stack Pointer, respectively. operate with Modulo Addressing:
In general, any particular circular buffer can be • If XWM = 15, X RAGU and X WAGU Modulo
configured to operate in only one direction, as there are Addressing is disabled.
certain restrictions on the buffer start address (for incre- • If YWM = 15, Y AGU Modulo Addressing is
menting buffers), or end address (for decrementing disabled.
buffers), based upon the direction of the buffer.
The X Address Space Pointer W register (XWM), to
The only exception to the usage restrictions is for which Modulo Addressing is to be applied, is stored in
buffers that have a power-of-two length. As these MODCON<3:0> (see Table 3-1). Modulo Addressing is
buffers satisfy the start and end address criteria, they enabled for X data space when XWM is set to any value
can operate in a bidirectional mode (that is, address other than ‘15’ and the XMODEN bit is set at
boundary checks are performed on both the lower and MODCON<15>.
upper address boundaries).
The Y Address Space Pointer W register (YWM) to
3.4.1 START AND END ADDRESS which Modulo Addressing is to be applied is stored in
MODCON<7:4>. Modulo Addressing is enabled for Y
The Modulo Addressing scheme requires that a data space when YWM is set to any value other than
starting and ending address be specified and loaded ‘15’ and the YMODEN bit is set at MODCON<14>.
into the 16-bit Modulo Buffer Address registers:
XMODSRT, XMODEND, YMODSRT and YMODEND
(see Table 3-1).

FIGURE 3-5: MODULO ADDRESSING OPERATION EXAMPLE

Byte MOV #0x1100, W0

Address MOV W0, XMODSRT ;set modulo start address
MOV #0x1163, W0
0x1100 MOV W0, MODEND ;set modulo end address
MOV #0x8001, W0
MOV W0, MODCON ;enable W1, X AGU for modulo

MOV #0x0000, W0 ;W0 holds buffer fill value

MOV #0x1110, W1 ;point W1 to buffer

DO AGAIN, #0x31 ;fill the 50 buffer locations

MOV W0, [W1++] ;fill the next location
0x1163 AGAIN: INC W0, W0 ;increment the fill value

Start Addr = 0x1100

End Addr = 0x1163
Length = 0x0032 words

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 45

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

3.4.3 MODULO ADDRESSING If the length of a bit-reversed buffer is M = 2N bytes,

APPLICABILITY the last ‘N’ bits of the data buffer start address must
be zeros.
Modulo Addressing can be applied to the Effective
Address (EA) calculation associated with any W XB<14:0> is the Bit-Reversed Address modifier, or
register. ‘pivot point’, which is typically a constant. In the case of
an FFT computation, its value is equal to half of the FFT
Address boundaries check for addresses equal to:
data buffer size.
• The upper boundary addresses for incrementing
buffers Note: All bit-reversed EA calculations assume
word sized data (LSB of every EA is
• The lower boundary addresses for decrementing
always clear). The XB value is scaled
buffers
accordingly to generate compatible (byte)
It is important to realize that the address boundaries addresses.
also check for addresses less than or greater than
When enabled, Bit-Reversed Addressing is executed
these addresses. Address changes can, therefore,
only for Register Indirect with Pre-Increment or
jump beyond boundaries and still be adjusted correctly.
Post-Increment Addressing and word sized data writes.
Note: The modulo corrected effective address is It will not function for any other addressing mode or for
written back to the register only when byte sized data, and normal addresses are generated
Pre-Modify or Post-Modify Addressing instead. When Bit-Reversed Addressing is active, the
mode is used to compute the effective W Address Pointer is always added to the address
address. When an address offset (such as modifier (XB), and the offset associated with the Regis-
[W7+W2]) is used, Modulo Address ter Indirect Addressing mode is ignored. In addition, as
correction is performed but the contents of word sized data is a requirement, the LSb of the EA is
the register remain unchanged. ignored (and always clear).
Note: Modulo Addressing and Bit-Reversed
3.5 Bit-Reversed Addressing Addressing should not be enabled
Bit-Reversed Addressing mode is intended to simplify together. If an application attempts to do so,
data re-ordering for radix-2 FFT algorithms. It is Bit-Reversed Addressing will assume
supported by the X AGU for data writes only. priority when active for the X WAGU and X
WAGU Modulo Addressing will be
The modifier, which can be a constant value or register disabled. However, Modulo Addressing will
contents, is regarded as having its bit order reversed. The continue to function in the X RAGU.
address source and destination are kept in normal order.
Thus, the only operand requiring reversal is the modifier. If Bit-Reversed Addressing has already been enabled
by setting the BREN (XBREV<15>) bit, a write to the
3.5.1 BIT-REVERSED ADDRESSING XBREV register should not be immediately followed by
IMPLEMENTATION an indirect read operation using the W register that has
been designated as the bit-reversed pointer.
Bit-Reversed Addressing mode is enabled in any of
these situations:
• BWM bits (W register selection) in the MODCON
register are any value other than ‘15’ (the stack
cannot be accessed using Bit-Reversed
Addressing).
• The BREN bit is set in the XBREV register.
• The addressing mode used is Register Indirect
with Pre-Increment or Post-Increment.

DS70290B-page 46 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

FIGURE 3-6: BIT-REVERSED ADDRESS EXAMPLE

Sequential Address
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 0

Bit Locations Swapped Left-to-Right

Around Center of Binary Value

b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b1 b2 b3 b4 0

Bit-Reversed Address

Pivot Point
XB = 0x0008 for a 16-Word Bit-Reversed Buffer

TABLE 3-24: BIT-REVERSED ADDRESS SEQUENCE (16-ENTRY)

Normal Address Bit-Reversed Address

A3 A2 A1 A0 Decimal A3 A2 A1 A0 Decimal
0 0 0 0 0 0 0 0 0 0
0 0 0 1 1 1 0 0 0 8
0 0 1 0 2 0 1 0 0 4
0 0 1 1 3 1 1 0 0 12
0 1 0 0 4 0 0 1 0 2
0 1 0 1 5 1 0 1 0 10
0 1 1 0 6 0 1 1 0 6
0 1 1 1 7 1 1 1 0 14
1 0 0 0 8 0 0 0 1 1
1 0 0 1 9 1 0 0 1 9
1 0 1 0 10 0 1 0 1 5
1 0 1 1 11 1 1 0 1 13
1 1 0 0 12 0 0 1 1 3
1 1 0 1 13 1 0 1 1 11
1 1 1 0 14 0 1 1 1 7
1 1 1 1 15 1 1 1 1 15

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 47

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

3.6 Interfacing Program and Data 3.6.1 ADDRESSING PROGRAM SPACE

Memory Spaces Since the address ranges for the data and program
spaces are 16 and 24 bits, respectively, a method is
The dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
needed to create a 23-bit or 24-bit program address
architecture uses a 24-bit-wide program space and a
from 16-bit data registers. The solution depends on the
16-bit-wide data space. The architecture is also a
interface method to be used.
modified Harvard scheme, meaning that data can also
be present in the program space. To use this data For table operations, the 8-bit Table Page register
successfully, it must be accessed in a way that (TBLPAG) is used to define a 32K word region within
preserves the alignment of information in both spaces. the program space. This is concatenated with a 16-bit
EA to arrive at a full 24-bit program space address. In
Aside from normal execution, the
this format, the Most Significant bit of TBLPAG is used
dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
to determine if the operation occurs in the user memory
architecture provides two methods by which program
(TBLPAG<7> = 0) or the configuration memory
space can be accessed during operation:
(TBLPAG<7> = 1).
• Using table instructions to access individual bytes
For remapping operations, the 8-bit Program Space
or words anywhere in the program space
Visibility register (PSVPAG) is used to define a
• Remapping a portion of the program space into 16K word page in the program space. When the Most
the data space (Program Space Visibility) Significant bit of the EA is ‘1’, PSVPAG is concatenated
Table instructions allow an application to read or write with the lower 15 bits of the EA to form a 23-bit program
to small areas of the program memory. This capability space address. Unlike table operations, this limits
makes the method ideal for accessing data tables that remapping operations strictly to the user memory area.
need to be updated periodically. It also allows access Table 3-25 and Figure 3-7 show how the program EA is
to all bytes of the program word. The remapping created for table operations and remapping accesses
method allows an application to access a large block of from the data EA. Here, P<23:0> refers to a program
data on a read-only basis, which is ideal for look ups space word, and D<15:0> refers to a data space word.
from a large table of static data. The application can
only access the least significant word of the program
word.

TABLE 3-25: PROGRAM SPACE ADDRESS CONSTRUCTION

Access Program Space Address
Access Type
Space <23> <22:16> <15> <14:1> <0>
Instruction Access User 0 PC<22:1> 0
(Code Execution) 0xx xxxx xxxx xxxx xxxx xxx0
TBLRD/TBLWT User TBLPAG<7:0> Data EA<15:0>
(Byte/Word Read/Write) 0xxx xxxx xxxx xxxx xxxx xxxx
Configuration TBLPAG<7:0> Data EA<15:0>
1xxx xxxx xxxx xxxx xxxx xxxx
Program Space Visibility User 0 PSVPAG<7:0> Data EA<14:0>(1)
(Block Remap/Read) 0 xxxx xxxx xxx xxxx xxxx xxxx
Note 1: Data EA<15> is always ‘1’ in this case, but is not used in calculating the program space address. Bit 15 of
the address is PSVPAG<0>.

DS70290B-page 48 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

FIGURE 3-7: DATA ACCESS FROM PROGRAM SPACE ADDRESS GENERATION

Program Counter(1) 0 Program Counter 0

23 bits

EA 1/0

Table Operations(2) 1/0 TBLPAG

8 bits 16 bits

24 bits

Select
1 EA 0
Program Space Visibility(1)
0 PSVPAG
(Remapping)
8 bits 15 bits

23 bits

User/Configuration Byte Select

Space Select

Note 1: The Least Significant bit (LSb) of program space addresses is always fixed as ‘0’ to maintain
word alignment of data in the program and data spaces.
2: Table operations are not required to be word-aligned. Table read operations are permitted in
the configuration memory space.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 49

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

3.6.2 DATA ACCESS FROM PROGRAM In Byte mode, either the upper or lower byte of the
MEMORY USING TABLE lower program word is mapped to the lower byte of
INSTRUCTIONS a data address. The upper byte is selected when
Byte Select is ‘1’; the lower byte is selected when
The TBLRDL and TBLWTL instructions offer a direct it is ‘0’.
method of reading or writing the lower word of any
address within the program space without going • TBLRDH (Table Read High): In Word mode, this
through data space. The TBLRDH and TBLWTH instruction maps the entire upper word of a program
instructions are the only method to read or write the address (P<23:16>) to a data address. Note that
upper 8 bits of a program space word as data. D<15:8>, the ‘phantom byte’, will always be ‘0’.
The PC is incremented by two for each successive In Byte mode, this instruction maps the upper or
24-bit program word. This allows program memory lower byte of the program word to D<7:0> of the
addresses to directly map to data space addresses. data address, as in the TBLRDL instruction. Note
Program memory can thus be regarded as two that the data will always be ‘0’ when the upper
16-bit-wide word address spaces, residing side by side, ‘phantom’ byte is selected (Byte Select = 1).
each with the same address range. TBLRDL and In a similar fashion, two table instructions, TBLWTH
TBLWTL access the space that contains the least and TBLWTL, are used to write individual bytes or
significant data word. TBLRDH and TBLWTH access the words to a program space address. The details of
space that contains the upper data byte. their operation are explained in Section 4.0 “Flash
Two table instructions are provided to move byte or Program Memory”.
word sized (16-bit) data to and from program space. For all table operations, the area of program memory
Both function as either byte or word operations. space to be accessed is determined by the Table Page
• TBLRDL (Table Read Low): In Word mode, this register (TBLPAG). TBLPAG covers the entire program
instruction maps the lower word of the program memory space of the device, including user and
space location (P<15:0>) to a data address configuration spaces. When TBLPAG<7> = 0, the table
(D<15:0>). page is located in the user memory space. When
TBLPAG<7> = 1, the page is located in configuration
space.

FIGURE 3-8: ACCESSING PROGRAM MEMORY WITH TABLE INSTRUCTIONS

Program Space
TBLPAG
02
23 15 0
0x000000 23 16 8 0
00000000
00000000
0x020000 00000000
0x030000 00000000

‘Phantom’ Byte

TBLRDH.B (Wn<0> = 0)
TBLRDL.B (Wn<0> = 1)
TBLRDL.B (Wn<0> = 0)
TBLRDL.W

The address for the table operation is determined by the data EA

within the page defined by the TBLPAG register.
0x800000 Only read operations are shown; write operations are also valid in
the user memory area.

DS70290B-page 50 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

3.6.3 READING DATA FROM PROGRAM 24-bit program word are used to contain the data. The
MEMORY USING PROGRAM SPACE upper 8 bits of any program space location used as
VISIBILITY data should be programmed with ‘1111 1111’ or
‘0000 0000’ to force a NOP. This prevents possible
The upper 32 Kbytes of data space may optionally be issues should the area of code ever be accidentally
mapped into any 16K word page of the program space. executed.
This option provides transparent access to stored
constant data from the data space without the need to Note: PSV access is temporarily disabled during
use special instructions (such as TBLRDL/H). table reads/writes.
Program space access through the data space occurs For operations that use PSV and are executed outside
if the Most Significant bit of the data space EA is ‘1’ and a REPEAT loop, the MOV and MOV.D instructions
program space visibility is enabled by setting the PSV require one instruction cycle in addition to the specified
bit in the Core Control register (CORCON<2>). The execution time. All other instructions require two
location of the program memory space to be mapped instruction cycles in addition to the specified execution
into the data space is determined by the Program time.
Space Visibility Page register (PSVPAG). This 8-bit For operations that use PSV, and are executed inside
register defines any one of 256 possible pages of a REPEAT loop, these instances require two instruction
16K words in program space. In effect, PSVPAG cycles in addition to the specified execution time of the
functions as the upper 8 bits of the program memory instruction:
address, with the 15 bits of the EA functioning as the
lower bits. By incrementing the PC by 2 for each • Execution in the first iteration
program memory word, the lower 15 bits of data space • Execution in the last iteration
addresses directly map to the lower 15 bits in the • Execution prior to exiting the loop due to an
corresponding program space addresses. interrupt
Data reads to this area add a cycle to the instruction • Execution upon re-entering the loop after an
being executed, since two program memory fetches interrupt is serviced
are required. Any other iteration of the REPEAT loop will allow the
Although each data space address 8000h and higher instruction using PSV to access data to execute in a
maps directly into a corresponding program memory single cycle.
address (see Figure 3-9), only the lower 16 bits of the

FIGURE 3-9: PROGRAM SPACE VISIBILITY OPERATION

When CORCON<2> = 1 and EA<15> = 1:

Program Space Data Space

PSVPAG 23 15 0
0x000000 0x0000
02 Data EA<14:0>
0x010000
0x018000
The data in the page
designated by
PSVPAG is mapped
into the upper half of
the data memory 0x8000
space...

PSV Area
...while the lower 15 bits
of the EA specify an
exact address within
0xFFFF the PSV area. This
corresponds exactly to
the same lower 15 bits
of the actual program
space address.
0x800000

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 51

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

NOTES:

DS70290B-page 52 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

4.0 FLASH PROGRAM MEMORY the digital signal controller just before shipping the
product. This also allows the most recent firmware or a
Note: This data sheet summarizes the features custom firmware to be programmed.
of the dsPIC33FJ32GP202/204 and RTSP is accomplished using TBLRD (table read) and
dsPIC33FJ16GP304 family of devices. It TBLWT (table write) instructions. With RTSP, the user
is not intended to be a comprehensive application can write program memory data either in
reference source. To complement the blocks or ‘rows’ of 64 instructions (192 bytes) at a time
information in this data sheet, refer to the or a single program memory word, and erase program
dsPIC33F Family Reference Manual, memory in blocks or ‘pages’ of 512 instructions (1536
“Section 5. Flash Programming” bytes) at a time.
(DS70191), which is available from the
Microchip website (www.microchip.com).
4.1 Table Instructions and Flash
The dsPIC33FJ32GP202/204 and Programming
dsPIC33FJ16GP304 devices contain internal Flash
program memory for storing and executing application Regardless of the method used, all programming of
code. The memory is readable, writable and erasable Flash memory is done with the table read and table
during normal operation over the entire VDD range. write instructions. These allow direct read and write
access to the program memory space from the data
Flash memory can be programmed in two ways:
memory while the device is in normal operating mode.
• In-Circuit Serial Programming™ (ICSP™) The 24-bit target address in the program memory is
programming capability formed using bits <7:0> of the TBLPAG register and the
• Run-Time Self-Programming (RTSP) Effective Address (EA) from a W register specified in
the table instruction, as shown in Figure 4-1.
ICSP allows a dsPIC33FJ32GP202/204 and
dsPIC33FJ16GP304 device to be serially programmed The TBLRDL and the TBLWTL instructions are used to
while in the end application circuit. This is done with read or write to bits<15:0> of program memory.
two lines for programming clock and programming data TBLRDL and TBLWTL can access program memory in
(one of the alternate programming pin pairs: both Word and Byte modes.
PGC1/PGD1, PGC2/PGD2 or PGC3/PGD3), and three The TBLRDH and TBLWTH instructions are used to read
other lines for power (VDD), ground (VSS) and Master or write to bits<23:16> of program memory. TBLRDH
Clear (MCLR). This allows customers to manufacture and TBLWTH can also access program memory in Word
boards with unprogrammed devices and then program or Byte mode.

FIGURE 4-1: ADDRESSING FOR TABLE REGISTERS

24 bits

Using
0 Program Counter 0
Program Counter

Working Reg EA
Using
1/0 TBLPAG Reg
Table Instruction
8 bits 16 bits

User/Configuration Byte
Space Select 24-bit EA Select

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 53

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

4.2 RTSP Operation 4.3 Programming Operations

The dsPIC33FJ32GP202/204 and A complete programming sequence is necessary for
dsPIC33FJ16GP304 Flash program memory array is programming or erasing the internal Flash in RTSP
organized into rows of 64 instructions or 192 bytes. mode. The processor stalls (waits) until the program-
RTSP allows the user application to erase a page of ming operation is finished.
memory, which consists of eight rows (512 instructions) The programming time depends on the FRC accuracy
at a time, and to program one row or one word at a (see Table 21-18, AC Characteristics: Internal RC
time. The 8-row erase pages and single row write rows Accuracy) and the value of the FRC Oscillator Tuning
are edge-aligned from the beginning of program register (see Register 7-4). Use the following formula to
memory, on boundaries of 1536 bytes and 192 bytes, calculate the minimum and maximum values for the
respectively. Row Write Time, Page Erase Time, and Word Write
The program memory implements holding buffers that Cycle Time parameters (see Table 21-12, DC
can contain 64 instructions of programming data. Prior Characteristics: Program Memory).
to the actual programming operation, the write data
must be loaded into the buffers sequentially. The EQUATION 4-1: PROGRAMMING TIME
instruction words loaded must always be from a group
of 64 boundary. T
-------------------------------------------------------------------------------------------------------------------------
-
7.37 MHz × ( FRC Accuracy )% × ( FRC Tuning )%
The basic sequence for RTSP programming is to set up
a Table Pointer, then do a series of TBLWT instructions
to load the buffers. Programming is performed by For example, if the device is operating at +125°C, the
setting the control bits in the NVMCON register. A total FRC accuracy will be ±5%. If the TUN<5:0> bits (see
of 64 TBLWTL and TBLWTH instructions are required Register 7-4) are set to ‘b111111, the Minimum Row
to load the instructions. Write Time is:
All of the table write operations are single-word writes 11064 Cycles
(two instruction cycles) because only the buffers are T RW = ---------------------------------------------------------------------------------------------- = 1.435ms
7.37 MHz × ( 1 + 0.05 ) × ( 1 – 0.00375 )
written. A programming cycle is required for
programming each row. and, the Maximum Row Write Time is:

11064 Cycles
T RW = ---------------------------------------------------------------------------------------------- = 1.586ms
7.37 MHz × ( 1 – 0.05 ) × ( 1 – 0.00375 )

Setting the WR bit (NVMCON<15>) starts the opera-

tion, and the WR bit is automatically cleared when the
operation is finished.

4.4 Control Registers

Two SFRs are used to read and write the program
Flash memory:
• NVMCON: Flash Memory Control Register
• NVMKEY: Nonvolatile Memory Key Register
The NVMCON register (Register 4-1) controls which
blocks are to be erased, which memory type is to be
programmed and the start of the programming cycle.
NVMKEY (Register 4-2) is a write-only register that is
used for write protection. To start a programming or
erase sequence, the user application must
consecutively write 55h and AAh to the NVMKEY
register. Refer to Section 4.3 “Programming
Operations” for further details.

DS70290B-page 54 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 4-1: NVMCON: FLASH MEMORY CONTROL REGISTER

R/SO-0(1) R/W-0(1) R/W-0(1) U-0 U-0 U-0 U-0 U-0
WR WREN WRERR — — — — —
bit 15 bit 8

U-0 R/W-0(1) U-0 U-0 R/W-0(1) R/W-0(1) R/W-0(1) R/W-0(1)

(2)
— ERASE — — NVMOP<3:0>
bit 7 bit 0

Legend: SO = Settable Only bit

R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15 WR: Write Control bit

1 = Initiates a Flash memory program or erase operation. The operation is self-timed and the bit is
cleared by hardware once operation is complete
0 = Program or erase operation is complete and inactive
bit 14 WREN: Write Enable bit
1 = Enable Flash program/erase operations
0 = Inhibit Flash program/erase operations
bit 13 WRERR: Write Sequence Error Flag bit
1 = An improper program or erase sequence attempt or termination has occurred (bit is set
automatically on any set attempt of the WR bit)
0 = The program or erase operation completed normally
bit 12-7 Unimplemented: Read as ‘0’
bit 6 ERASE: Erase/Program Enable bit
1 = Perform the erase operation specified by NVMOP<3:0> on the next WR command
0 = Perform the program operation specified by NVMOP<3:0> on the next WR command
bit 5-4 Unimplemented: Read as ‘0’
bit 3-0 NVMOP<3:0>: NVM Operation Select bits(2)
If ERASE = 1:
1111 = Memory bulk erase operation
1101 = Erase General Segment
1100 = Erase Secure Segment
0011 = No operation
0010 = Memory page erase operation
0001 = No operation
0000 = Erase a single Configuration register byte

If ERASE = 0:
1111 = No operation
1101 = No operation
1100 = No operation
0011 = Memory word program operation
0010 = No operation
0001 = Memory row program operation
0000 = Program a single Configuration register byte

Note 1: These bits can only be reset on POR.

2: All other combinations of NVMOP<3:0> are unimplemented.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 55

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 4-2: NVMKEY: NONVOLATILE MEMORY KEY REGISTER

U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
bit 15 bit 8

W-0 W-0 W-0 W-0 W-0 W-0 W-0 W-0

NVMKEY<7:0>
bit 7 bit 0

Legend: SO = Settable Only bit

R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-8 Unimplemented: Read as ‘0’

bit 7-0 NVMKEY<7:0>: Key Register (Write Only) bits

DS70290B-page 56 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

4.4.1 PROGRAMMING ALGORITHM FOR 4. Write the first 64 instructions from data RAM into
FLASH PROGRAM MEMORY the program memory buffers (see Example 4-2).
Programmers can program one row of program Flash 5. Write the program block to Flash memory:
memory at a time. To do this, it is necessary to erase a) Set the NVMOP bits to ‘0001’ to configure
the 8-row erase page that contains the desired row. for row programming. Clear the ERASE bit
The general process is: and set the WREN bit.
1. Read eight rows of program memory b) Write 0x55 to NVMKEY.
(512 instructions) and store in data RAM. c) Write 0xAA to NVMKEY.
2. Update the program data in RAM with the d) Set the WR bit. The programming cycle
desired new data. begins and the CPU stalls for the duration of
3. Erase the block (see Example 4-1): the write cycle. When the write to Flash
memory is done, the WR bit is cleared
a) Set the NVMOP bits (NVMCON<3:0>) to
automatically.
‘0010’ to configure for block erase. Set the
ERASE (NVMCON<6>) and WREN 6. Repeat steps 4 and 5, using the next available
(NVMCON<14>) bits. 64 instructions from the block in data RAM by
incrementing the value in TBLPAG, until all
b) Write the starting address of the page to be
512 instructions are written back to Flash memory.
erased into the TBLPAG and W registers.
c) Write 0x55 to NVMKEY. For protection against accidental operations, the write
initiate sequence for NVMKEY must be used to allow
d) Write 0xAA to NVMKEY.
any erase or program operation to proceed. After the
e) Set the WR bit (NVMCON<15>). The erase programming command has been executed, the user
cycle begins and the CPU stalls for the application must wait for the programming time until
duration of the erase cycle. When the erase is programming is complete. The two instructions
done, the WR bit is cleared automatically. following the start of the programming sequence
should be NOPs, as shown in Example 4-3.

EXAMPLE 4-1: ERASING A PROGRAM MEMORY PAGE

; Set up NVMCON for block erase operation
MOV #0x4042, W0 ;
MOV W0, NVMCON ; Initialize NVMCON
; Init pointer to row to be ERASED
MOV #tblpage(PROG_ADDR), W0 ;
MOV W0, TBLPAG ; Initialize PM Page Boundary SFR
MOV #tbloffset(PROG_ADDR), W0 ; Initialize in-page EA[15:0] pointer
TBLWTL W0, [W0] ; Set base address of erase block
DISI #5 ; Block all interrupts with priority <7
; for next 5 instructions
MOV #0x55, W0
MOV W0, NVMKEY ; Write the 55 key
MOV #0xAA, W1 ;
MOV W1, NVMKEY ; Write the AA key
BSET NVMCON, #WR ; Start the erase sequence
NOP ; Insert two NOPs after the erase
NOP ; command is asserted

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 57

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

EXAMPLE 4-2: LOADING THE WRITE BUFFERS

; Set up NVMCON for row programming operations
MOV #0x4001, W0 ;
MOV W0, NVMCON ; Initialize NVMCON
; Set up a pointer to the first program memory location to be written
; program memory selected, and writes enabled
MOV #0x0000, W0 ;
MOV W0, TBLPAG ; Initialize PM Page Boundary SFR
MOV #0x6000, W0 ; An example program memory address
; Perform the TBLWT instructions to write the latches
; 0th_program_word
MOV #LOW_WORD_0, W2 ;
MOV #HIGH_BYTE_0, W3 ;
TBLWTL W2, [W0] ; Write PM low word into program latch
TBLWTH W3, [W0++] ; Write PM high byte into program latch
; 1st_program_word
MOV #LOW_WORD_1, W2 ;
MOV #HIGH_BYTE_1, W3 ;
TBLWTL W2, [W0] ; Write PM low word into program latch
TBLWTH W3, [W0++] ; Write PM high byte into program latch
; 2nd_program_word
MOV #LOW_WORD_2, W2 ;
MOV #HIGH_BYTE_2, W3 ;
TBLWTL W2, [W0] ; Write PM low word into program latch
TBLWTH W3, [W0++] ; Write PM high byte into program latch
•
•
•
; 63rd_program_word
MOV #LOW_WORD_31, W2 ;
MOV #HIGH_BYTE_31, W3 ;
TBLWTL W2, [W0] ; Write PM low word into program latch
TBLWTH W3, [W0++] ; Write PM high byte into program latch

EXAMPLE 4-3: INITIATING A PROGRAMMING SEQUENCE

DISI #5 ; Block all interrupts with priority <7
; for next 5 instructions
MOV #0x55, W0
MOV W0, NVMKEY ; Write the 55 key
MOV #0xAA, W1 ;
MOV W1, NVMKEY ; Write the AA key
BSET NVMCON, #WR ; Start the erase sequence
NOP ; Insert two NOPs after the
NOP ; erase command is asserted

DS70290B-page 58 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

5.0 RESETS A simplified block diagram of the Reset module is

shown in Figure 5-1.
Note: This data sheet summarizes the features Any active source of reset will make the SYSRST
of the dsPIC33FJ32GP202/204 and signal active. On system Reset, some of the registers
dsPIC33FJ16GP304 family of devices. It associated with the CPU and peripherals are forced to
is not intended to be a comprehensive a known Reset state and some are unaffected.
reference source. To complement the
information in this data sheet, refer to the Note: Refer to the specific peripheral section or
dsPIC33F Family Reference Manual, Section 2.0 “CPU” of this manual for
“Section 8. Reset” (DS70192), which is register Reset states.
available from the Microchip website
(www.microchip.com). All types of device Reset sets a corresponding status
bit in the RCON register to indicate the type of Reset
The Reset module combines all reset sources and (see Register 5-1).
controls the device Master Reset Signal, SYSRST. The
A POR clears all the bits, except for the POR bit
following is a list of device Reset sources: (RCON<0>), that are set. The user application can set
• POR: Power-on Reset or clear any bit at any time during code execution. The
• BOR: Brown-out Reset RCON bits only serve as status bits. Setting a particular
• MCLR: Master Clear Pin Reset Reset status bit in software does not cause a device
Reset to occur.
• SWR: RESET Instruction
• WDTO: Watchdog Timer Reset The RCON register also has other bits associated with
the Watchdog Timer and device power-saving states.
• CM: Configuration Mismatch Reset
The function of these bits is discussed in other sections
• TRAPR: Trap Conflict Reset of this manual.
• IOPUWR: Illegal Condition Device Reset
Note: The status bits in the RCON register
- Illegal Opcode Reset
should be cleared after they are read so
- Uninitialized W Register Reset that the next RCON register value after a
- Security Reset device Reset is meaningful.

FIGURE 5-1: RESET SYSTEM BLOCK DIAGRAM

RESET Instruction

Glitch Filter

MCLR
WDT
Module
Sleep or Idle

BOR
Internal
Regulator SYSRST
VDD

VDD Rise POR

Detect

Trap Conflict
Illegal Opcode

Uninitialized W Register

Configuration Mismatch

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 59

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 5-1: RCON: RESET CONTROL REGISTER(1)

R/W-0 R/W-0 U-0 U-0 U-0 U-0 R/W-0 R/W-0
TRAPR IOPUWR — — — — CM VREGS
bit 15 bit 8

R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-1 R/W-1

EXTR SWR SWDTEN(2) WDTO SLEEP IDLE BOR POR
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15 TRAPR: Trap Reset Flag bit

1 = A Trap Conflict Reset has occurred
0 = A Trap Conflict Reset has not occurred
bit 14 IOPUWR: Illegal Opcode or Uninitialized W Access Reset Flag bit
1 = An illegal opcode detection, an illegal address mode or uninitialized W register used as an
Address Pointer caused a Reset
0 = An illegal opcode or uninitialized W Reset has not occurred
bit 13-10 Unimplemented: Read as ‘0’
bit 9 CM: Configuration Mismatch Flag bit
1 = A configuration mismatch Reset has occurred
0 = A configuration mismatch Reset has NOT occurred
bit 8 VREGS: Voltage Regulator Standby During Sleep bit
1 = Voltage regulator is active during Sleep
0 = Voltage regulator goes into Standby mode during Sleep
bit 7 EXTR: External Reset (MCLR) Pin bit
1 = A Master Clear (pin) Reset has occurred
0 = A Master Clear (pin) Reset has not occurred
bit 6 SWR: Software Reset (Instruction) Flag bit
1 = A RESET instruction has been executed
0 = A RESET instruction has not been executed
bit 5 SWDTEN: Software Enable/Disable of WDT bit(2)
1 = WDT is enabled
0 = WDT is disabled
bit 4 WDTO: Watchdog Timer Time-out Flag bit
1 = WDT time-out has occurred
0 = WDT time-out has not occurred
bit 3 SLEEP: Wake-up from Sleep Flag bit
1 = Device has been in Sleep mode
0 = Device has not been in Sleep mode
bit 2 IDLE: Wake-up from Idle Flag bit
1 = Device was in Idle mode
0 = Device was not in Idle mode

Note 1: All of the Reset status bits can be set or cleared in software. Setting one of these bits in software does not
cause a device Reset.
2: If the FWDTEN Configuration bit is ‘1’ (unprogrammed), the WDT is always enabled, regardless of the
SWDTEN bit setting.

DS70290B-page 60 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 5-1: RCON: RESET CONTROL REGISTER(1) (CONTINUED)

bit 1 BOR: Brown-out Reset Flag bit
1 = A Brown-out Reset has occurred
0 = A Brown-out Reset has not occurred
bit 0 POR: Power-on Reset Flag bit
1 = A Power-up Reset has occurred
0 = A Power-up Reset has not occurred

Note 1: All of the Reset status bits can be set or cleared in software. Setting one of these bits in software does not
cause a device Reset.
2: If the FWDTEN Configuration bit is ‘1’ (unprogrammed), the WDT is always enabled, regardless of the
SWDTEN bit setting.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 61

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

5.1 System Reset 2. BOR Reset: The on-chip voltage regulator has
a BOR circuit that keeps the device in Reset
The dsPIC33FJ32GP202/204 and until VDD crosses the VBOR threshold and the
dsPIC33FJ16GP304 family of devices have two types delay TBOR has elapsed. The delay TBOR
of Reset: ensures that the voltage regulator output
• Cold Reset becomes stable.
• Warm Reset 3. PWRT Timer: The programmable power-up
timer continues to hold the processor in Reset
A cold Reset is the result of a Power-on Reset (POR)
for a specific period of time (TPWRT) after a
or a Brown-out Reset (BOR). On a cold Reset, the
BOR. The delay TPWRT ensures that the system
FNOSC configuration bits in the FOSC device
power supplies have stabilized at the
configuration register selects the device clock source.
appropriate level for full-speed operation. After
A warm Reset is the result of all other reset sources, the delay TPWRT has elapsed, the SYSRST
including the RESET instruction. On warm Reset, the becomes inactive, which in turn enables the
device will continue to operate from the current clock selected oscillator to start generating clock
source as indicated by the Current Oscillator Selection cycles.
(COSC<2:0>) bits in the Oscillator Control 4. Oscillator Delay: The total delay for the clock to
(OSCCON<14:12>) register. be ready for various clock source selections is
The device is kept in a Reset state until the system given in Table 5-1. Refer to Section 7.0
power supplies have stabilized at appropriate levels “Oscillator Configuration” for more
and the oscillator clock is ready. The sequence in information.
which this occurs is detailed below and is shown in 5. When the oscillator clock is ready, the processor
Figure 5-2. begins execution from location 0x000000. The
1. POR Reset: A POR circuit holds the device in user application programs a GOTO instruction at
Reset when the power supply is turned on. The the reset address, which redirects program
POR circuit is active until VDD crosses the VPOR execution to the appropriate start-up routine.
threshold and the delay TPOR has elapsed. 6. The Fail-Safe Clock Monitor (FSCM), if enabled,
begins to monitor the system clock when the
system clock is ready and the delay TFSCM
elapsed.

TABLE 5-1: OSCILLATOR DELAY

Oscillator Oscillator Start-up
Oscillator Mode PLL Lock Time Total Delay
Start-up Delay Timer
FRC, FRCDIV16, TOSCD — — TOSCD
FRCDIVN
FRCPLL TOSCD — TLOCK TOSCD + TLOCK
XT TOSCD TOST — TOSCD + TOST
HS TOSCD TOST — TOSCD + TOST
EC — — — —
XTPLL TOSCD TOST TLOCK TOSCD + TOST + TLOCK
HSPLL TOSCD TOST TLOCK TOSCD + TOST + TLOCK
ECPLL — — TLOCK TLOCK
SOSC TOSCD TOST — TOSCD + TOST
LPRC TOSCD — — TOSCD
Note 1: TOSCD = Oscillator Start-up Delay (1.1 μs max for FRC, 70 μs max for LPRC). Crystal Oscillator start-up
times vary with crystal characteristics, load capacitance, etc.
2: TOST = Oscillator Start-up Timer Delay (1024 oscillator clock period). For example, TOST = 102.4 μs for a
10 MHz crystal and TOST = 32 ms for a 32 kHz crystal.
3: TLOCK = PLL lock time (1.5 ms nominal), if PLL is enabled.

DS70290B-page 62 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

FIGURE 5-2: SYSTEM RESET TIMING

Vbor
VBOR
VPOR

VDD

TPOR

1
POR Reset TBOR

2
BOR Reset 3
TPWRT

SYSRST
4

Oscillator Clock
TOSCD TOST TLOCK
6

TFSCM
FSCM
5

Device Status Reset Run

Time

Note 1: POR Reset: A POR circuit holds the device in Reset when the power supply is turned on. The POR circuit is
active until VDD crosses the VPOR threshold and the delay TPOR has elapsed.
2: BOR Reset: The on-chip voltage regulator has a BOR circuit that keeps the device in Reset until VDD crosses
the VBOR threshold and the delay TBOR has elapsed. The delay TBOR ensures the voltage regulator output
becomes stable.
3: PWRT Timer: The programmable power-up timer continues to hold the processor in Reset for a specific
period of time (TPWRT) after a BOR. The delay TPWRT ensures that the system power supplies have stabilized
at the appropriate level for full-speed operation. After the delay TPWRT has elapsed, the SYSRST becomes
inactive, which in turn enables the selected oscillator to start generating clock cycles.
4: Oscillator Delay: The total delay for the clock to be ready for various clock source selections are given in
Table 5-1. Refer to Section 7.0 “Oscillator Configuration” for more information.
5: When the oscillator clock is ready, the processor begins execution from location 0x000000. The user
application programs a GOTO instruction at the reset address, which redirects program execution to the
appropriate start-up routine.
6: The Fail-Safe Clock Monitor (FSCM), if enabled, begins to monitor the system clock when the system clock
is ready and the delay TFSCM elapsed.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 63

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 5-2: OSCILLATOR DELAY

Symbol Parameter Value
VPOR POR threshold 1.8V nominal
TPOR POR extension time 30 μs maximum
VBOR BOR threshold 2.5V nominal
TBOR BOR extension time 100 μs maximum
TPWRT Programmable power-up time delay 0-128 ms nominal
TFSCM Fail-Safe Clock Monitor Delay 900 μs maximum

Note: When the device exits the Reset

5.2.1 Brown-out Reset (BOR) and
condition (begins normal operation), the Power-up timer (PWRT)
device operating parameters (voltage, The on-chip regulator has a Brown-out Reset (BOR)
frequency, temperature, etc.) must be circuit that resets the device when the VDD is too low
within their operating ranges, otherwise (VDD < VBOR) for proper device operation. The BOR
the device may not function correctly. circuit keeps the device in Reset until VDD crosses
The user application must ensure that VBOR threshold and the delay TBOR has elapsed. The
the delay between the time power is delay TBOR ensures the voltage regulator output
first applied, and the time SYSRST becomes stable.
becomes inactive, is long enough to get
all operating parameters within The BOR status (BOR) bit in the Reset Control
specification. (RCON<1>) register is set to indicate the Brown-out
Reset.
5.2 Power-on Reset (POR) The device will not run at full speed after a BOR as the
VDD should rise to acceptable levels for full-speed
A Power-on Reset (POR) circuit ensures the device is operation. The PWRT provides power-up time delay
reset from power-on. The POR circuit is active until (TPWRT) to ensure that the system power supplies have
VDD crosses the VPOR threshold and the delay TPOR stabilized at the appropriate levels for full-speed
has elapsed. The delay TPOR ensures the internal operation before the SYSRST is released.
device bias circuits become stable.
The power-up timer delay (TPWRT) is programmed by
The device supply voltage characteristics must meet the Power-on Reset Timer Value Select
the specified starting voltage and rise rate (FPWRT<2:0>) bits in the POR Configuration
requirements to generate the POR. Refer to (FPOR<2:0>) register, which provides eight settings
Section 21.0 “Electrical Characteristics” for details. (from 0 ms to 128 ms). Refer to Section 18.0 “Special
The POR status (POR) bit in the Reset Control Features” for further details.
(RCON<0>) register is set to indicate the Power-on Figure 5-3 shows the typical brown-out scenarios. The
Reset. reset delay (TBOR + TPWRT) is initiated each time VDD
rises above the VBOR trip point

DS70290B-page 64 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

FIGURE 5-3: BROWN-OUT SITUATIONS

VDD

VBOR
TBOR + TPWRT
SYSRST

VDD

VBOR
TBOR + TPWRT
SYSRST

VDD dips before PWRT expires

VDD

VBOR
TBOR + TPWRT
SYSRST

5.3 External Reset (EXTR) The Software Reset (Instruction) Flag (SWR) bit in the
Reset Control (RCON<6>) register is set to indicate
The external Reset is generated by driving the MCLR the software Reset.
pin low. The MCLR pin is a Schmitt trigger input with an
additional glitch filter. Reset pulses that are longer than
5.5 Watchdog Time-out Reset (WDTO)
the minimum pulse-width will generate a Reset. Refer
to Section 21.0 “Electrical Characteristics” for Whenever a Watchdog time-out occurs, the device will
minimum pulse-width specifications. The External asynchronously assert SYSRST. The clock source will
Reset (MCLR) Pin (EXTR) bit in the Reset Control remain unchanged. A WDT time-out during Sleep or
(RCON) register is set to indicate the MCLR Reset. Idle mode will wake-up the processor, but will not reset
the processor.
5.3.1 EXTERNAL SUPERVISORY CIRCUIT
The Watchdog Timer Time-out Flag (WDTO) bit in the
Many systems have external supervisory circuits that Reset Control (RCON<4>) register is set to indicate
generate reset signals to Reset multiple devices in the the Watchdog Reset. Refer to Section 18.4
system. This external Reset signal can be directly “Watchdog Timer (WDT)” for more information on
connected to the MCLR pin to Reset the device when Watchdog Reset.
the rest of system is Reset.
5.6 Trap Conflict Reset
5.3.2 INTERNAL SUPERVISORY CIRCUIT
If a lower-priority hard trap occurs while a
When using the internal power supervisory circuit to higher-priority trap is being processed, a hard trap
Reset the device, the external reset pin (MCLR) should conflict Reset occurs. The hard traps include
be tied directly or resistively to VDD. In this case, the exceptions of priority level 13 through level 15, inclu-
MCLR pin will not be used to generate a Reset. The sive. The address error (level 13) and oscillator error
external reset pin (MCLR) does not have an internal (level 14) traps fall into this category.
pull-up and must not be left unconnected.
The Trap Reset Flag (TRAPR) bit in the Reset Control
(RCON<15>) register is set to indicate the Trap Conflict
5.4 Software RESET Instruction (SWR)
Reset. Refer to Section 6.0 “Interrupt Controller” for
Whenever the RESET instruction is executed, the more information on trap conflict Resets.
device will assert SYSRST, placing the device in a
special Reset state. This Reset state will not
re-initialize the clock. The clock source in effect prior to
the RESET instruction will remain. SYSRST is released
at the next instruction cycle, and the reset vector fetch
will commence.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 65

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

5.7 Configuration Mismatch Reset each program memory section to store the data values.
The upper 8 bits should be programmed with 3Fh,
To maintain the integrity of the peripheral pin select which is an illegal opcode value.
control registers, they are constantly monitored with
shadow registers in hardware. If an unexpected 5.8.2 UNINITIALIZED W REGISTER
change in any of the registers occur (such as cell RESET
disturbances caused by ESD or other external events),
a configuration mismatch Reset occurs. Any attempts to use the uninitialized W register as an
address pointer will Reset the device. The W register
The Configuration Mismatch Flag (CM) bit in the array (with the exception of W15) is cleared during all
Reset Control (RCON<9>) register is set to indicate resets and is considered uninitialized until written to.
the configuration mismatch Reset. Refer to
Section 9.0 “I/O Ports” for more information on the 5.8.3 SECURITY RESET
configuration mismatch Reset.
If a Program Flow Change (PFC) or Vector Flow
Note: The configuration mismatch feature and Change (VFC) targets a restricted location in a
associated reset flag is not available on all protected segment (Boot and Secure Segment), that
devices. operation will cause a security Reset.
The PFC occurs when the Program Counter is
5.8 Illegal Condition Device Reset reloaded as a result of a Call, Jump, Computed Jump,
Return, Return from Subroutine, or other form of
An illegal condition device Reset occurs due to the branch instruction.
following sources:
The VFC occurs when the Program Counter is
• Illegal Opcode Reset reloaded with an Interrupt or Trap vector.
• Uninitialized W Register Reset
Refer to Section 18.6 “Code Protection and
• Security Reset CodeGuard™ Security” for more information on
The Illegal Opcode or Uninitialized W Access Reset Security Reset.
Flag (IOPUWR) bit in the Reset Control (RCON<14>)
register is set to indicate the illegal condition device 5.9 Using the RCON Status Bits
Reset.
The user application can read the Reset Control
5.8.1 ILLEGAL OPCODE RESET (RCON) register after any device Reset to determine
the cause of the reset.
A device Reset is generated if the device attempts to
execute an illegal opcode value that is fetched from Note: The status bits in the RCON register
program memory. should be cleared after they are read so
The illegal opcode Reset function can prevent the that the next RCON register value after a
device from executing program memory sections that device Reset will be meaningful.
are used to store constant data. To take advantage of Table 5-3 provides a summary of the reset flag bit
the illegal opcode Reset, use only the lower 16 bits of operation.

TABLE 5-3: RESET FLAG BIT OPERATION

Flag Bit Set by: Cleared by:
TRAPR (RCON<15>) Trap conflict event POR,BOR
IOPWR (RCON<14>) Illegal opcode or uninitialized POR,BOR
W register access or Security Reset
CM (RCON<9>) Configuration Mismatch POR,BOR
EXTR (RCON<7>) MCLR Reset POR
SWR (RCON<6>) RESET instruction POR,BOR
WDTO (RCON<4>) WDT time-out PWRSAV instruction,
CLRWDT instruction, POR,BOR
SLEEP (RCON<3>) PWRSAV #SLEEP instruction POR,BOR
IDLE (RCON<2>) PWRSAV #IDLE instruction POR,BOR
BOR (RCON<1>) POR, BOR —
POR (RCON<0>) POR —
Note: All Reset flag bits can be set or cleared by user software.

DS70290B-page 66 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

6.0 INTERRUPT CONTROLLER 6.1.1 ALTERNATE INTERRUPT VECTOR

TABLE
Note: This data sheet summarizes the features
The Alternate Interrupt Vector Table (AIVT) is located
of the dsPIC33FJ32GP202/204 and
after the IVT, as shown in Figure 6-1. Access to the
dsPIC33FJ16GP304 family of devices. It
AIVT is provided by the ALTIVT control bit
is not intended to be a comprehensive
(INTCON2<15>). If the ALTIVT bit is set, all interrupt
reference source. To complement the
and exception processes use the alternate vectors
information in this data sheet, refer to the
instead of the default vectors. The alternate vectors are
dsPIC33F Family Reference Manual,
organized in the same manner as the default vectors.
“Section 6. Interrupts” (DS70184),
which is available on the Microchip The AIVT supports debugging by providing a means to
website (www.microchip.com). switch between an application and a support
environment without requiring the interrupt vectors to
The dsPIC33FJ32GP202/204 and be reprogrammed. This feature also enables switching
dsPIC33FJ16GP304 interrupt controller reduces the between applications for evaluation of different
numerous peripheral interrupt request signals to a software algorithms at run time. If the AIVT is not
single interrupt request signal to the needed, the AIVT should be programmed with the
dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 same addresses used in the IVT.
CPU. It has the following features:
• Up to eight processor exceptions and software 6.2 Reset Sequence
traps
• Seven user-selectable priority levels A device Reset is not a true exception because the
interrupt controller is not involved in the Reset process.
• Interrupt Vector Table (IVT) with up to 118 vectors
The dsPIC33FJ32GP202/204 and
• A unique vector for each interrupt or exception dsPIC33FJ16GP304 device clears its registers in
source response to a Reset, which forces the PC to zero. The
• Fixed priority within a specified user priority level digital signal controller then begins program execution
• Alternate Interrupt Vector Table (AIVT) for debug at location 0x000000. The user application can use a
support GOTO instruction at the Reset address which redirects
• Fixed interrupt entry and return latencies program execution to the appropriate start-up routine.

Note: Any unimplemented or unused vector

6.1 Interrupt Vector Table locations in the IVT and AIVT should be
The Interrupt Vector Table is shown in Figure 6-1. The programmed with the address of a default
IVT resides in program memory, starting at location interrupt handler routine that contains a
000004h. The IVT contains 126 vectors consisting of RESET instruction.
8 nonmaskable trap vectors plus up to 118 sources of
interrupt. In general, each interrupt source has its own
vector. Each interrupt vector contains a 24-bit wide
address. The value programmed into each interrupt
vector location is the starting address of the associated
Interrupt Service Routine (ISR).
Interrupt vectors are prioritized in terms of their natural
priority; this priority is linked to their position in the
vector table. Lower addresses generally have a higher
natural priority. For example, the interrupt associated
with vector 0 will take priority over interrupts at any
other vector address.
dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
devices implement up to 21 unique interrupts and four
nonmaskable traps. These are summarized in
Table 6-1 and Table 6-2.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 67

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

FIGURE 6-1: dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 INTERRUPT VECTOR TABLE

Reset – GOTO Instruction 0x000000

Reset – GOTO Address 0x000002
Reserved 0x000004
Oscillator Fail Trap Vector
Address Error Trap Vector
Stack Error Trap Vector
Math Error Trap Vector
Reserved
Reserved
Reserved
Interrupt Vector 0 0x000014
Interrupt Vector 1
~
~
~
Interrupt Vector 52 0x00007C
Interrupt Vector Table (IVT)(1)
Interrupt Vector 53 0x00007E
Decreasing Natural Order Priority

Interrupt Vector 54 0x000080

~
~
~
Interrupt Vector 116 0x0000FC
Interrupt Vector 117 0x0000FE
Reserved 0x000100
Reserved 0x000102
Reserved
Oscillator Fail Trap Vector
Address Error Trap Vector
Stack Error Trap Vector
Math Error Trap Vector
Reserved
Reserved
Reserved
Interrupt Vector 0 0x000114
Interrupt Vector 1
~
~
~ Alternate Interrupt Vector Table (AIVT)(1)
Interrupt Vector 52 0x00017C
Interrupt Vector 53 0x00017E
Interrupt Vector 54 0x000180
~
~
~
Interrupt Vector 116
Interrupt Vector 117 0x0001FE
Start of Code 0x000200

Note 1: See Table 6-1 for the list of implemented interrupt vectors.

DS70290B-page 68 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 6-1: INTERRUPT VECTORS

Interrupt
Vector
Request (IRQ) IVT Address AIVT Address Interrupt Source
Number
Number
8 0 0x000014 0x000114 INT0 – External Interrupt 0
9 1 0x000016 0x000116 IC1 – Input Compare 1
10 2 0x000018 0x000118 OC1 – Output Compare 1
11 3 0x00001A 0x00011A T1 – Timer1
12 4 0x00001C 0x00011C Reserved
13 5 0x00001E 0x00011E IC2 – Input Capture 2
14 6 0x000020 0x000120 OC2 – Output Compare 2
15 7 0x000022 0x000122 T2 – Timer2
16 8 0x000024 0x000124 T3 – Timer3
17 9 0x000026 0x000126 SPI1E – SPI1 Error
18 10 0x000028 0x000128 SPI1 – SPI1 Transfer Done
19 11 0x00002A 0x00012A U1RX – UART1 Receiver
20 12 0x00002C 0x00012C U1TX – UART1 Transmitter
21 13 0x00002E 0x00012E ADC1 – ADC1
22 14 0x000030 0x000130 Reserved
23 15 0x000032 0x000132 Reserved
24 16 0x000034 0x000134 SI2C1 – I2C1 Slave Events
25 17 0x000036 0x000136 MI2C1 – I2C1 Master Events
26 18 0x000038 0x000138 Reserved
27 19 0x00003A 0x00013A Change Notification Interrupt
28 20 0x00003C 0x00013C INT1 – External Interrupt 1
29 21 0x00003E 0x00013E Reserved
30 22 0x000040 0x000140 IC7 – Input Capture 7
31 23 0x000042 0x000142 IC8 – Input Capture 8
32 24 0x000044 0x000144 Reserved
33 25 0x000046 0x000146 Reserved
34 26 0x000048 0x000148 Reserved
35 27 0x00004A 0x00014A Reserved
36 28 0x00004C 0x00014C Reserved
37 29 0x00004E 0x00014E INT2 – External Interrupt 2
38 30 0x000050 0x000150 Reserved
39 31 0x000052 0x000152 Reserved
40 32 0x000054 0x000154 Reserved
41 33 0x000056 0x000156 Reserved
42 34 0x000058 0x000158 Reserved
43 35 0x00005A 0x00015A Reserved
44 36 0x00005C 0x00015C Reserved
45 37 0x00005E 0x00015E Reserved
46 38 0x000060 0x000160 Reserved
47 39 0x000062 0x000162 Reserved
48 40 0x000064 0x000164 Reserved
49 41 0x000066 0x000166 Reserved
50 42 0x000068 0x000168 Reserved
51 43 0x00006A 0x00016A Reserved
52 44 0x00006C 0x00016C Reserved
53 45 0x00006E 0x00016E Reserved

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 69

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 6-1: INTERRUPT VECTORS (CONTINUED)

Interrupt
Vector
Request (IRQ) IVT Address AIVT Address Interrupt Source
Number
Number
54 46 0x000070 0x000170 Reserved
55 47 0x000072 0x000172 Reserved
56 48 0x000074 0x000174 Reserved
57 49 0x000076 0x000176 Reserved
58 50 0x000078 0x000178 Reserved
59 51 0x00007A 0x00017A Reserved
60 52 0x00007C 0x00017C Reserved
61 53 0x00007E 0x00017E Reserved
62 54 0x000080 0x000180 Reserved
63 55 0x000082 0x000182 Reserved
64 56 0x000084 0x000184 Reserved
65 57 0x000086 0x000186 Reserved
66 58 0x000088 0x000188 Reserved
67 59 0x00008A 0x00018A Reserved
68 60 0x00008C 0x00018C Reserved
69 61 0x00008E 0x00018E Reserved
70 62 0x000090 0x000190 Reserved
71 63 0x000092 0x000192 Reserved
72 64 0x000094 0x000194 Reserved
73 65 0x000096 0x000196 U1E – UART1 Error
74 66 0x000098 0x000198 Reserved
75 67 0x00009A 0x00019A Reserved
76 68 0x00009C 0x00019C Reserved
77 69 0x00009E 0x00019E Reserved
78 70 0x0000A0 0x0001A0 Reserved
79 71 0x0000A2 0x0001A2 Reserved
80-125 72-117 0x0000A4-0x0000 0x0001A4-0x0001 Reserved
FE FE

TABLE 6-2: TRAP VECTORS

Vector Number IVT Address AIVT Address Trap Source
0 0x000004 0x000104 Reserved
1 0x000006 0x000106 Oscillator Failure
2 0x000008 0x000108 Address Error
3 0x00000A 0x00010A Stack Error
4 0x00000C 0x00010C Math Error
5 0x00000E 0x00010E Reserved
6 0x000010 0x000110 Reserved
7 0x000012 0x000112 Reserved

DS70290B-page 70 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

6.3 Interrupt Control and Status 6.3.4 IPCx

Registers The IPC registers are used to set the interrupt priority
level for each source of interrupt. Each user interrupt
dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
source can be assigned to one of eight priority levels.
devices implement a total of 17 registers for the
interrupt controller:
6.3.5 INTTREG
• Interrupt Control Register 1 (INTCON1)
The INTTREG register contains the associated
• Interrupt Control Register 2 (INTCON2) interrupt vector number and the new CPU interrupt
• Interrupt Flag Status Registers (IFSx) priority level, which are latched into vector number
• Interrupt Enable Control Registers (IECx) (VECNUM<6:0>) and Interrupt level (ILR<3:0>) bit
• Interrupt Priority Control Registers (IPCx) fields in the INTTREG register. The new interrupt
priority level is the priority of the pending interrupt.
• Interrupt Control and Status Register (INTTREG)
The interrupt sources are assigned to the IFSx, IECx
6.3.1 INTCON1 AND INTCON2 and IPCx registers in the same sequence that they are
Global interrupt control functions are controlled from listed in Table 6-1. For example, the INT0 (External
INTCON1 and INTCON2. INTCON1 contains the Interrupt 0) is shown as having vector number 8 and a
Interrupt Nesting Disable (NSTDIS) bit as well as the natural order priority of 0. Thus, the INT0IF bit is found
control and status flags for the processor trap sources. in IFS0<0>, the INT0IE bit in IEC0<0>, and the INT0IP
The INTCON2 register controls the external interrupt bits in the first position of IPC0 (IPC0<2:0>).
request signal behavior and the use of the Alternate
6.3.6 STATUS REGISTERS
Interrupt Vector Table.
Although they are not specifically part of the interrupt
6.3.2 IFSx control hardware, two of the CPU Control registers
The IFS registers maintain all of the interrupt request contain bits that control interrupt functionality:
flags. Each source of interrupt has a status bit, which is • The CPU STATUS register, SR, contains the
set by the respective peripherals or external signal and IPL<2:0> bits (SR<7:5>). These bits indicate the
is cleared via software. current CPU interrupt priority level. The user can
change the current CPU priority level by writing to
6.3.3 IECx the IPL bits.
The IEC registers maintain all of the interrupt enable • The CORCON register contains the IPL3 bit
bits. These control bits are used to individually enable which, together with IPL<2:0>, also indicates the
interrupts from the peripherals or external signals. current CPU priority level. IPL3 is a read-only bit,
so that trap events cannot be masked by the user
software.
All Interrupt registers are described in Register 6-1
through Register 6-19 in the following pages.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 71

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 6-1: SR: CPU STATUS REGISTER(1)

R-0 R-0 R/C-0 R/C-0 R-0 R/C-0 R -0 R/W-0
OA OB SA SB OAB SAB DA DC
bit 15 bit 8

R/W-0(3) R/W-0(3) R/W-0(3) R-0 R/W-0 R/W-0 R/W-0 R/W-0

IPL2(2) IPL1 (2)
IPL0(2) RA N OV Z C
bit 7 bit 0

Legend:
C = Clear only bit R = Readable bit U = Unimplemented bit, read as ‘0’
S = Set only bit W = Writable bit -n = Value at POR
‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 7-5 IPL<2:0>: CPU Interrupt Priority Level Status bits(2)

111 = CPU Interrupt Priority Level is 7 (15), user interrupts disabled
110 = CPU Interrupt Priority Level is 6 (14)
101 = CPU Interrupt Priority Level is 5 (13)
100 = CPU Interrupt Priority Level is 4 (12)
011 = CPU Interrupt Priority Level is 3 (11)
010 = CPU Interrupt Priority Level is 2 (10)
001 = CPU Interrupt Priority Level is 1 (9)
000 = CPU Interrupt Priority Level is 0 (8)

Note 1: For complete register details, see Register 2-1: “SR: CPU Status Register”.
2: The IPL<2:0> bits are concatenated with the IPL<3> bit (CORCON<3>) to form the CPU Interrupt Priority
Level. The value in parentheses indicates the IPL if IPL<3> = 1. User interrupts are disabled when
IPL<3> = 1.
3: The IPL<2:0> Status bits are read-only when NSTDIS (INTCON1<15>) = 1.

REGISTER 6-2: CORCON: CORE CONTROL REGISTER(1)

U-0 U-0 U-0 R/W-0 R/W-0 R-0 R-0 R-0
— — — US EDT DL<2:0>
bit 15 bit 8

R/W-0 R/W-0 R/W-1 R/W-0 R/C-0 R/W-0 R/W-0 R/W-0

SATA SATB SATDW ACCSAT IPL3(2) PSV RND IF
bit 7 bit 0

Legend: C = Clear only bit

R = Readable bit W = Writable bit -n = Value at POR ‘1’ = Bit is set
0’ = Bit is cleared ‘x = Bit is unknown U = Unimplemented bit, read as ‘0’

bit 3 IPL3: CPU Interrupt Priority Level Status bit 3(2)

1 = CPU interrupt priority level is greater than 7
0 = CPU interrupt priority level is 7 or less

Note 1: For complete register details, see Register 2-2: “CORCON: CORE Control Register”.
2: The IPL3 bit is concatenated with the IPL<2:0> bits (SR<7:5>) to form the CPU Interrupt Priority Level.

DS70290B-page 72 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 6-3: INTCON1: INTERRUPT CONTROL REGISTER 1

R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
NSTDIS OVAERR OVBERR COVAERR COVBERR OVATE OVBTE COVTE
bit 15 bit 8

R/W-0 R/W-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 U-0

SFTACERR DIV0ERR — MATHERR ADDRERR STKERR OSCFAIL —
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15 NSTDIS: Interrupt Nesting Disable bit

1 = Interrupt nesting is disabled
0 = Interrupt nesting is enabled
bit 14 OVAERR: Accumulator A Overflow Trap Flag bit
1 = Trap was caused by overflow of Accumulator A
0 = Trap was not caused by overflow of Accumulator A
bit 13 OVBERR: Accumulator B Overflow Trap Flag bit
1 = Trap was caused by overflow of Accumulator B
0 = Trap was not caused by overflow of Accumulator B
bit 12 COVAERR: Accumulator A Catastrophic Overflow Trap Flag bit
1 = Trap was caused by catastrophic overflow of Accumulator A
0 = Trap was not caused by catastrophic overflow of Accumulator A
bit 11 COVBERR: Accumulator B Catastrophic Overflow Trap Flag bit
1 = Trap was caused by catastrophic overflow of Accumulator B
0 = Trap was not caused by catastrophic overflow of Accumulator B
bit 10 OVATE: Accumulator A Overflow Trap Enable bit
1 = Trap overflow of Accumulator A
0 = Trap disabled
bit 9 OVBTE: Accumulator B Overflow Trap Enable bit
1 = Trap overflow of Accumulator B
0 = Trap disabled
bit 8 COVTE: Catastrophic Overflow Trap Enable bit
1 = Trap on catastrophic overflow of Accumulator A or B enabled
0 = Trap disabled
bit 7 SFTACERR: Shift Accumulator Error Status bit
1 = Math error trap was caused by an invalid accumulator shift
0 = Math error trap was not caused by an invalid accumulator shift
bit 6 DIV0ERR: Arithmetic Error Status bit
1 = Math error trap was caused by a divide by zero
0 = Math error trap was not caused by a divide by zero
bit 5 Unimplemented: Read as ‘0’
bit 4 MATHERR: Arithmetic Error Status bit
1 = Math error trap has occurred
0 = Math error trap has not occurred
bit 3 ADDRERR: Address Error Trap Status bit
1 = Address error trap has occurred
0 = Address error trap has not occurred

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 73

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 6-3: INTCON1: INTERRUPT CONTROL REGISTER 1 (CONTINUED)

bit 2 STKERR: Stack Error Trap Status bit
1 = Stack error trap has occurred
0 = Stack error trap has not occurred
bit 1 OSCFAIL: Oscillator Failure Trap Status bit
1 = Oscillator failure trap has occurred
0 = Oscillator failure trap has not occurred
bit 0 Unimplemented: Read as ‘0’

DS70290B-page 74 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 6-4: INTCON2: INTERRUPT CONTROL REGISTER 2

R/W-0 R-0 U-0 U-0 U-0 U-0 U-0 U-0
ALTIVT DISI — — — — — —
bit 15 bit 8

U-0 U-0 U-0 U-0 U-0 R/W-0 R/W-0 R/W-0

— — — — — INT2EP INT1EP INT0EP
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15 ALTIVT: Enable Alternate Interrupt Vector Table bit

1 = Use alternate vector table
0 = Use standard (default) vector table
bit 14 DISI: DISI Instruction Status bit
1 = DISI instruction is active
0 = DISI instruction is not active
bit 13-3 Unimplemented: Read as ‘0’
bit 2 INT2EP: External Interrupt 2 Edge Detect Polarity Select bit
1 = Interrupt on negative edge
0 = Interrupt on positive edge
bit 1 INT1EP: External Interrupt 1 Edge Detect Polarity Select bit
1 = Interrupt on negative edge
0 = Interrupt on positive edge
bit 0 INT0EP: External Interrupt 0 Edge Detect Polarity Select bit
1 = Interrupt on negative edge
0 = Interrupt on positive edge

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 75

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 6-5: IFS0: INTERRUPT FLAG STATUS REGISTER 0

U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
— — AD1IF U1TXIF U1RXIF SPI1IF SPI1EIF T3IF
bit 15 bit 8

R/W-0 R/W-0 R/W-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0

T2IF OC2IF IC2IF — T1IF OC1IF IC1IF INT0IF
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-14 Unimplemented: Read as ‘0’

bit 13 AD1IF: ADC1 Conversion Complete Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 12 U1TXIF: UART1 Transmitter Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 11 U1RXIF: UART1 Receiver Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 10 SPI1IF: SPI1 Event Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 9 SPI1EIF: SPI1 Fault Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 8 T3IF: Timer3 Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 7 T2IF: Timer2 Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 6 OC2IF: Output Compare Channel 2 Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 5 IC2IF: Input Capture Channel 2 Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 4 Unimplemented: Read as ‘0’
bit 3 T1IF: Timer1 Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 2 OC1IF: Output Compare Channel 1 Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred

DS70290B-page 76 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 6-5: IFS0: INTERRUPT FLAG STATUS REGISTER 0 (CONTINUED)

bit 1 IC1IF: Input Capture Channel 1 Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 0 INT0IF: External Interrupt 0 Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 77

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 6-6: IFS1: INTERRUPT FLAG STATUS REGISTER 1

U-0 U-0 R/W-0 U-0 U-0 U-0 U-0 U-0
— — INT2IF — — — — —
bit 15 bit 8

R/W-0 R/W-0 U-0 R/W-0 R/W-0 U-0 R/W-0 R/W-0

IC8IF IC7IF — INT1IF CNIF — MI2C1IF SI2C1IF
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-14 Unimplemented: Read as ‘0’

bit 13 INT2IF: External Interrupt 2 Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 12-8 Unimplemented: Read as ‘0’
bit 7 IC8IF: Input Capture Channel 8 Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 6 IC7IF: Input Capture Channel 7 Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 5 Unimplemented: Read as ‘0’
bit 4 INT1IF: External Interrupt 1 Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 3 CNIF: Input Change Notification Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 2 Unimplemented: Read as ‘0’
bit 1 MI2C1IF: I2C1 Master Events Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 0 SI2C1IF: I2C1 Slave Events Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred

DS70290B-page 78 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 6-7: IFS4: INTERRUPT FLAG STATUS REGISTER 4

U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
bit 15 bit 8

U-0 U-0 U-0 U-0 U-0 U-0 R/W-0 U-0

— — — — — — U1EIF —
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-2 Unimplemented: Read as ‘0’

bit 1 U1EIF: UART1 Error Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
bit 0 Unimplemented: Read as ‘0’

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 79

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 6-8: IEC0: INTERRUPT ENABLE CONTROL REGISTER 0

U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
— — AD1IE U1TXIE U1RXIE SPI1IE SPI1EIE T3IE
bit 15 bit 8

R/W-0 R/W-0 R/W-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0

T2IE OC2IE IC2IE — T1IE OC1IE IC1IE INT0IE
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-14 Unimplemented: Read as ‘0’

bit 13 AD1IE: ADC1 Conversion Complete Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 12 U1TXIE: UART1 Transmitter Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 11 U1RXIE: UART1 Receiver Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 10 SPI1IE: SPI1 Event Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 9 SPI1EIE: SPI1 Error Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 8 T3IE: Timer3 Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 7 T2IE: Timer2 Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 6 OC2IE: Output Compare Channel 2 Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 5 IC2IE: Input Capture Channel 2 Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 4 Unimplemented: Read as ‘0’
bit 3 T1IE: Timer1 Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 2 OC1IE: Output Compare Channel 1 Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled

DS70290B-page 80 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 6-8: IEC0: INTERRUPT ENABLE CONTROL REGISTER 0 (CONTINUED)

bit 1 IC1IE: Input Capture Channel 1 Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 0 INT0IE: External Interrupt 0 Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 81

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 6-9: IEC1: INTERRUPT ENABLE CONTROL REGISTER 1

U-0 U-0 R/W-0 U-0 U-0 U-0 U-0 U-0
— — INT2IE — — — — —
bit 15 bit 8

R/W-0 R/W-0 U-0 R/W-0 R/W-0 U-0 R/W-0 R/W-0

IC8IE IC7IE — INT1IE CNIE — MI2C1IE SI2C1IE
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-14 Unimplemented: Read as ‘0’

bit 13 INT2IE: External Interrupt 2 Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 12-8 Unimplemented: Read as ‘0’
bit 7 IC8IE: Input Capture Channel 8 Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 6 IC7IE: Input Capture Channel 7 Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 5 Unimplemented: Read as ‘0’
bit 4 INT1IE: External Interrupt 1 Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 3 CNIE: Input Change Notification Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 2 Unimplemented: Read as ‘0’
bit 1 MI2C1IE: I2C1 Master Events Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 0 SI2C1IE: I2C1 Slave Events Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled

DS70290B-page 82 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 6-10: IEC4: INTERRUPT ENABLE CONTROL REGISTER 4

U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
bit 15 bit 8

U-0 U-0 U-0 U-0 U-0 U-0 R/W-0 U-0

— — — — — — U1EIE —
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-2 Unimplemented: Read as ‘0’

bit 1 U1EIE: UART1 Error Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 0 Unimplemented: Read as ‘0’

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 83

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 6-11: IPC0: INTERRUPT PRIORITY CONTROL REGISTER 0

U-0 R/W-1 R/W-0 R/W-0 U-0 R/W-1 R/W-0 R/W-0
— T1IP<2:0> — OC1IP<2:0>
bit 15 bit 8

U-0 R/W-1 R/W-0 R/W-0 U-0 R/W-1 R/W-0 R/W-0

— IC1IP<2:0> — INT0IP<2:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15 Unimplemented: Read as ‘0’

bit 14-12 T1IP<2:0>: Timer1 Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 11 Unimplemented: Read as ‘0’
bit 10-8 OC1IP<2:0>: Output Compare Channel 1 Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 7 Unimplemented: Read as ‘0’
bit 6-4 IC1IP<2:0>: Input Capture Channel 1 Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 3 Unimplemented: Read as ‘0’
bit 2-0 INT0IP<2:0>: External Interrupt 0 Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled

DS70290B-page 84 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 6-12: IPC1: INTERRUPT PRIORITY CONTROL REGISTER 1

U-0 R/W-1 R/W-0 R/W-0 U-0 R/W-1 R/W-0 R/W-0
— T2IP<2:0> — OC2IP<2:0>
bit 15 bit 8

U-0 R/W-1 R/W-0 R/W-0 U-0 U-0 U-0 U-0

— IC2IP<2:0> — — — —
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15 Unimplemented: Read as ‘0’

bit 14-12 T2IP<2:0>: Timer2 Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 11 Unimplemented: Read as ‘0’
bit 10-8 OC2IP<2:0>: Output Compare Channel 2 Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 7 Unimplemented: Read as ‘0’
bit 6-4 IC2IP<2:0>: Input Capture Channel 2 Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 3-0 Unimplemented: Read as ‘0’

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 85

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 6-13: IPC2: INTERRUPT PRIORITY CONTROL REGISTER 2

U-0 R/W-1 R/W-0 R/W-0 U-0 R/W-1 R/W-0 R/W-0
— U1RXIP<2:0> — SPI1IP<2:0>
bit 15 bit 8

U-0 R/W-1 R/W-0 R/W-0 U-0 R/W-1 R/W-0 R/W-0

— SPI1EIP<2:0> — T3IP<2:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15 Unimplemented: Read as ‘0’

bit 14-12 U1RXIP<2:0>: UART1 Receiver Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 11 Unimplemented: Read as ‘0’
bit 10-8 SPI1IP<2:0>: SPI1 Event Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 7 Unimplemented: Read as ‘0’
bit 6-4 SPI1EIP<2:0>: SPI1 Error Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 3 Unimplemented: Read as ‘0’
bit 2-0 T3IP<2:0>: Timer3 Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled

DS70290B-page 86 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 6-14: IPC3: INTERRUPT PRIORITY CONTROL REGISTER 3

U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
bit 15 bit 8

U-0 R/W-1 R/W-0 R/W-0 U-0 R/W-1 R/W-0 R/W-0

— AD1IP<2:0> — U1TXIP<2:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-7 Unimplemented: Read as ‘0’

bit 6-4 AD1IP<2:0>: ADC1 Conversion Complete Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 3 Unimplemented: Read as ‘0’
bit 2-0 U1TXIP<2:0>: UART1 Transmitter Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 87

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 6-15: IPC4: INTERRUPT PRIORITY CONTROL REGISTER 4

U-0 R/W-1 R/W-0 R/W-0 U-0 U-0 U-0 U-0
— CNIP<2:0> — — — —
bit 15 bit 8

U-0 R/W-1 R/W-0 R/W-0 U-0 R/W-1 R/W-0 R/W-0

— MI2C1IP<2:0> — SI2C1IP<2:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15 Unimplemented: Read as ‘0’

bit 14-12 CNIP<2:0>: Change Notification Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 11-7 Unimplemented: Read as ‘0’
bit 6-4 MI2C1IP<2:0>: I2C1 Master Events Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 3 Unimplemented: Read as ‘0’
bit 2-0 SI2C1IP<2:0>: I2C1 Slave Events Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled

DS70290B-page 88 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 6-16: IPC5: INTERRUPT PRIORITY CONTROL REGISTER 5

U-0 R/W-1 R/W-0 R/W-0 U-0 R/W-1 R/W-0 R/W-0
— IC8IP<2:0> — IC7IP<2:0>
bit 15 bit 8

U-0 U-0 U-0 U-0 U-0 R/W-1 R/W-0 R/W-0

— — — — — INT1IP<2:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15 Unimplemented: Read as ‘0’

bit 14-12 IC8IP<2:0>: Input Capture Channel 8 Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 11 Unimplemented: Read as ‘0’
bit 10-8 IC7IP<2:0>: Input Capture Channel 7 Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 7-3 Unimplemented: Read as ‘0’
bit 2-0 INT1IP<2:0>: External Interrupt 1 Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 89

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 6-17: IPC7: INTERRUPT PRIORITY CONTROL REGISTER 7

U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
bit 15 bit 8

U-0 R/W-1 R/W-0 R/W-0 U-0 U-0 U-0 U-0

— INT2IP<2:0> — — — —
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-7 Unimplemented: Read as ‘0’

bit 6-4 INT2IP<2:0>: External Interrupt 2 Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 3-0 Unimplemented: Read as ‘0’

DS70290B-page 90 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 6-18: IPC16: INTERRUPT PRIORITY CONTROL REGISTER 16

U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
bit 15 bit 8

U-0 R/W-1 R/W-0 R/W-0 U-0 U-0 U-0 U-0

— U1EIP<2:0> — — — —
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-7 Unimplemented: Read as ‘0’

bit 6-4 U1EIP<2:0>: UART1 Error Interrupt Priority bits
111 = Interrupt is priority 7 (highest priority interrupt)
•
•
•
001 = Interrupt is priority 1
000 = Interrupt source is disabled
bit 3-0 Unimplemented: Read as ‘0’

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 91

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 6-19: INTTREG: INTERRUPT CONTROL AND STATUS REGISTER

U-0 U-0 U-0 U-0 R-0 R-0 R-0 R-0
— — — — ILR<3:0>
bit 15 bit 8

U-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0

— VECNUM<6:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-12 Unimplemented: Read as ‘0’

bit 11-8 ILR<3:0>: New CPU Interrupt Priority Level bits
1111 = CPU Interrupt Priority Level is 15
•
•
•
0001 = CPU Interrupt Priority Level is 1
0000 = CPU Interrupt Priority Level is 0
bit 7 Unimplemented: Read as ‘0’
bit 6-0 VECNUM<6:0>: Vector Number of Pending Interrupt bits
0111111 = Interrupt Vector pending is number 135
•
•
•
0000001 = Interrupt Vector pending is number 9
0000000 = Interrupt Vector pending is number 8

DS70290B-page 92 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

6.4 Interrupt Setup Procedures 6.4.3 TRAP SERVICE ROUTINE

A Trap Service Routine (TSR) is coded like an ISR,
6.4.1 INITIALIZATION except that the appropriate trap status flag in the
To configure an interrupt source at initialization: INTCON1 register must be cleared to avoid re-entry
1. Set the NSTDIS bit (INTCON1<15>) if nested into the TSR.
interrupts are not desired.
6.4.4 INTERRUPT DISABLE
2. Select the user-assigned priority level for the
interrupt source by writing the control bits in the All user interrupts can be disabled using this
appropriate IPCx register. The priority level will procedure:
depend on the specific application and type of 1. Push the current SR value onto the software
interrupt source. If multiple priority levels are not stack using the PUSH instruction.
desired, the IPCx register control bits for all 2. Force the CPU to priority level 7 by inclusive
enabled interrupt sources can be programmed ORing the value OEh with SRL.
to the same non-zero value.
To enable user interrupts, the POP instruction can be
Note: At a device Reset, the IPCx registers are used to restore the previous SR value.
initialized such that all user interrupt
sources are assigned to priority level 4. Note: Only user interrupts with a priority level of
7 or lower can be disabled. Trap sources
3. Clear the interrupt flag status bit associated with (level 8-level 15) cannot be disabled.
the peripheral in the associated IFSx register.
The DISI instruction provides a convenient way to
4. Enable the interrupt source by setting the
disable interrupts of priority levels 1-6 for a fixed period
interrupt enable control bit associated with the
of time. Level 7 interrupt sources are not disabled by
source in the appropriate IECx register.
the DISI instruction.
6.4.2 INTERRUPT SERVICE ROUTINE
The method used to declare an ISR and initialize the
IVT with the correct vector address depends on the
programming language (C or Assembler) and the
language development toolsuite used to develop the
application.
In general, the user application must clear the interrupt
flag in the appropriate IFSx register for the source of
interrupt that the ISR handles. Otherwise, the program
will re-enter the ISR immediately after exiting the
routine. If the ISR is coded in assembly language, it
must be terminated using a RETFIE instruction to
unstack the saved PC value, SRL value and old CPU
priority level.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 93

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

NOTES:

DS70290B-page 94 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

7.0 OSCILLATOR • An on-chip PLL to scale the internal operating

frequency to the required system clock frequency.
CONFIGURATION
• An internal FRC oscillator that can also be used
Note: This data sheet summarizes the features with the PLL, thereby allowing full-speed
of the dsPIC33FJ32GP202/204 and operation without any external clock generation
dsPIC33FJ16GP304 family of devices. It hardware.
is not intended to be a comprehensive • Clock switching between various clock sources.
reference source. To complement the • Programmable clock postscaler for system power
information in this data sheet, refer to the savings.
dsPIC33F Family Reference Manual,
• A Fail-Safe Clock Monitor (FSCM) that detects
“Section 7. Oscillator” (DS70186),
clock failure and takes fail-safe measures.
which is available from the Microchip
website (www.microchip.com). • A Clock Control register (OSCCON).
• Nonvolatile Configuration bits for main oscillator
The dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 selection.
oscillator system provides:
A simplified diagram of the oscillator system is shown
• External and internal oscillator options as clock in Figure 7-1.
sources.

FIGURE 7-1: dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 OSCILLATOR SYSTEM DIAGRAM

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
Primary Oscillator

XT, HS, EC DOZE<2:0>

OSCO S2

S3 XTPLL, HSPLL,
ECPLL, FRCPLL FCY

DOZE
OSCI S1 PLL(1) S1/S3

÷ 2

FOSC

FRC
FRCDIV

FRCDIVN
Oscillator S7

FRCDIV<2:0>
TUN<5:0>
FRCDIV16
S6
÷ 16
FRC S0

LPRC LPRC
S5
Oscillator

Secondary Oscillator
SOSC
SOSCO S4

LPOSCEN
SOSCI Clock Fail Clock Switch Reset

S7 NOSC<2:0> FNOSC<2:0>
WDT, PWRT,
FSCM

Timer 1
Note 1: See Figure 7-2 for PLL details.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 95

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

7.1 CPU Clocking System 7.1.2 SYSTEM CLOCK SELECTION

The dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 The oscillator source used at a device Power-on Reset
device provides seven system clock options: event is selected using Configuration bit settings. The
oscillator Configuration bit settings are located in the
• Fast RC (FRC) Oscillator Configuration registers in the program memory. (Refer to
• FRC Oscillator with PLL Section 18.1 “Configuration Bits” for further details.)
• Primary (XT, HS or EC) Oscillator The Initial Oscillator Selection Configuration bits,
• Primary Oscillator with PLL FNOSC<2:0> (FOSCSEL<2:0>), and the Primary
• Secondary (LP) Oscillator Oscillator Mode Select Configuration bits,
POSCMD<1:0> (FOSC<1:0>), select the oscillator
• Low-Power RC (LPRC) Oscillator
source that is used at a Power-on Reset. The FRC
• FRC Oscillator with postscaler primary oscillator is the default (unprogrammed)
selection.
7.1.1 SYSTEM CLOCK SOURCES
The Configuration bits allow users to choose among 12
7.1.1.1 Fast RC different clock modes, shown in Table 7-1.
The Fast RC (FRC) internal oscillator runs at a nominal The output of the oscillator (or the output of the PLL if
frequency of 7.37 MHz. User software can tune the a PLL mode has been selected) FOSC is divided by 2 to
FRC frequency. User software can optionally specify a generate the device instruction clock (FCY). FCY
factor (ranging from 1:2 to 1:256) by which the FRC defines the operating speed of the device, and speeds
clock frequency is divided. This factor is selected using up to 40 MHz are supported by the
the FRCDIV<2:0> (CLKDIV<10:8>) bits. dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
architecture.
7.1.1.2 Primary
Instruction execution speed or device operating
The primary oscillator can use one of the following as frequency, FCY, is given by:
its clock source:
• XT (Crystal): Crystals and ceramic resonators in EQUATION 7-1: DEVICE OPERATING
the range of 3 MHz to 10 MHz. The crystal is FREQUENCY
connected to the OSC1 and OSC2 pins. FCY = FOSC/2
• HS (High-Speed Crystal): Crystals in the range of
10 MHz to 40 MHz. The crystal is connected to
the OSC1 and OSC2 pins. 7.1.3 PLL CONFIGURATION
• EC (External Clock): The external clock signal is The primary oscillator and internal FRC oscillator can
directly applied to the OSC1 pin. optionally use an on-chip PLL to obtain higher speeds
of operation. The PLL provides significant flexibility in
7.1.1.3 Secondary selecting the device operating speed. A block diagram
of the PLL is shown in Figure 7-2.
The secondary (LP) oscillator is designed for low power
and uses a 32.768 kHz crystal or ceramic resonator. The output of the primary oscillator or FRC, denoted as
The LP oscillator uses the SOSCI and SOSCO pins. ‘FIN’, is divided down by a prescale factor (N1) of 2, 3,
... or 33 before being provided to the PLL’s Voltage
7.1.1.4 Low-Power RC Controlled Oscillator (VCO). The input to the VCO must
The Low-Power RC (LPRC) internal oscIllator runs at a be selected in the range of 0.8 MHz to 8 MHz. The
nominal frequency of 32.768 kHz. It is also used as a prescale factor ‘N1’ is selected using the
reference clock by the Watchdog Timer (WDT) and PLLPRE<4:0> bits (CLKDIV<4:0>).
Fail-Safe Clock Monitor (FSCM). The PLL Feedback Divisor, selected using the
PLLDIV<8:0> bits (PLLFBD<8:0>), provides a factor ‘M’,
7.1.1.5 FRC by which the input to the VCO is multiplied. This factor
The clock signals generated by the FRC and primary must be selected such that the resulting VCO output
oscillators can be optionally applied to an on-chip frequency is in the range of 100 MHz to 200 MHz.
Phase Locked Loop (PLL) to provide a wide range of The VCO output is further divided by a postscale factor
output frequencies for device operation. PLL ‘N2.’ This factor is selected using the PLLPOST<1:0>
configuration is described in Section 7.1.3 “PLL bits (CLKDIV<7:6>). ‘N2’ can be either 2, 4 or 8, and
Configuration”. must be selected such that the PLL output frequency
The FRC frequency depends on the FRC accuracy (FOSC) is in the range of 12.5 MHz to 80 MHz, which
(see Table 21-18) and the value of the FRC Oscillator generates device operating speeds of 6.25-40 MIPS.
Tuning register (see Register 7-4). For a primary oscillator or FRC oscillator, output ‘FIN’,
the PLL output ‘FOSC’ is given by:

DS70290B-page 96 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

EQUATION 7-2: FOSC CALCULATION • If PLLPOST<1:0> = 0, then N2 = 2. This provides

a Fosc of 160/2 = 80 MHz. The resultant device
FOSC = FIN* ( N1*N2
M
) operating speed is 80/2 = 40 MIPS.

For example, suppose a 10 MHz crystal is being used, EQUATION 7-3: XT WITH PLL MODE
with “XT with PLL” being the selected oscillator mode. EXAMPLE
• If PLLPRE<4:0> = 0, then N1 = 2. This yields a
VCO input of 10/2 = 5 MHz, which is within the
acceptable range of 0.8-8 MHz. FCY =
2 2
(
FOSC 1 10000000*32
=
2*2
)
= 40 MIPS
• If PLLDIV<8:0> = 0x1E, then M = 32. This yields a
VCO output of 5 x 32 = 160 MHz, which is within
the 100-200 MHz ranged needed.

FIGURE 7-2: dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 PLL BLOCK DIAGRAM

0.8-8.0 MHz 100-200 MHz 12.5-80 MHz

Here Here Here

Source (Crystal, External Clock

or Internal RC) PLLPRE X VCO PLLPOST FOSC

PLLDIV

Divide by Divide by
2-33 2, 4, 8
Divide by
2-513

TABLE 7-1: CONFIGURATION BIT VALUES FOR CLOCK SELECTION

Oscillator Mode Oscillator Source POSCMD<1:0> FNOSC<2:0> Note
Fast RC Oscillator with Divide-by-N Internal xx 111 1, 2
(FRCDIVN)
Fast RC Oscillator with Divide-by-16 Internal xx 110 1
(FRCDIV16)
Low-Power RC Oscillator (LPRC) Internal xx 101 1
Secondary (Timer1) Oscillator (SOSC) Secondary xx 100 1
Primary Oscillator (HS) with PLL Primary 10 011 —
(HSPLL)
Primary Oscillator (XT) with PLL Primary 01 011 —
(XTPLL)
Primary Oscillator (EC) with PLL Primary 00 011 1
(ECPLL)
Primary Oscillator (HS) Primary 10 010 —
Primary Oscillator (XT) Primary 01 010 —
Primary Oscillator (EC) Primary 00 010 1
Fast RC Oscillator with PLL (FRCPLL) Internal xx 001 1
Fast RC Oscillator (FRC) Internal xx 000 1
Note 1: OSC2 pin function is determined by the OSCIOFNC Configuration bit.
2: This is the default oscillator mode for an unprogrammed (erased) device.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 97

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 7-1: OSCCON: OSCILLATOR CONTROL REGISTER

U-0 R-0 R-0 R-0 U-0 R/W-y R/W-y R/W-y
— COSC<2:0> — NOSC<2:0>
bit 15 bit 8

R/W-0 R/W-0 R-0 U-0 R/C-0 U-0 R/W-0 R/W-0

CLKLOCK IOLOCK LOCK — CF — LPOSCEN OSWEN
bit 7 bit 0

Legend: y = Value set from Configuration bits on POR

R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15 Unimplemented: Read as ‘0’

bit 14-12 COSC<2:0>: Current Oscillator Selection bits (read-only)
000 = Fast RC oscillator (FRC)
001 = Fast RC oscillator (FRC) with PLL
010 = Primary oscillator (XT, HS, EC)
011 = Primary oscillator (XT, HS, EC) with PLL
100 = Secondary oscillator (SOSC)
101 = Low-Power RC oscillator (LPRC)
110 = Fast RC oscillator (FRC) with Divide-by-16
111 = Fast RC oscillator (FRC) with Divide-by-n
bit 11 Unimplemented: Read as ‘0’
bit 10-8 NOSC<2:0>: New Oscillator Selection bits
000 = Fast RC oscillator (FRC)
001 = Fast RC oscillator (FRC) with PLL
010 = Primary oscillator (XT, HS, EC)
011 = Primary oscillator (XT, HS, EC) with PLL
100 = Secondary oscillator (SOSC)
101 = Low-Power RC oscillator (LPRC)
110 = Fast RC oscillator (FRC) with Divide-by-16
111 = Fast RC oscillator (FRC) with Divide-by-n
bit 7 CLKLOCK: Clock Lock Enable bit
If clock switching is enabled and FSCM is disabled (FOSC<FCKSM> = 0b01)
1 = Clock switching is disabled, system clock source is locked
0 = Clock switching is enabled, system clock source can be modified by clock switching
bit 6 IOLOCK: Peripheral Pin Select Lock bit
1 = Peripherial Pin Select is locked, write to peripheral pin select register is not allowed
0 = Peripherial Pin Select is unlocked, write to peripheral pin select register is allowed
bit 5 LOCK: PLL Lock Status bit (read-only)
1 = Indicates that PLL is in lock, or PLL start-up timer is satisfied
0 = Indicates that PLL is out of lock, start-up timer is in progress or PLL is disabled
bit 4 Unimplemented: Read as ‘0’
bit 3 CF: Clock Fail Detect bit (read/clear by application)
1 = FSCM has detected clock failure
0 = FSCM has not detected clock failure
bit 2 Unimplemented: Read as ‘0’

DS70290B-page 98 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 7-1: OSCCON: OSCILLATOR CONTROL REGISTER (CONTINUED)

bit 1 LPOSCEN: Secondary (LP) Oscillator Enable bit
1 = Enable secondary oscillator
0 = Disable secondary oscillator
bit 0 OSWEN: Oscillator Switch Enable bit
1 = Request oscillator switch to selection specified by NOSC<2:0> bits
0 = Oscillator switch is complete

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 99

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 7-2: CLKDIV: CLOCK DIVISOR REGISTER

R/W-0 R/W-0 R/W-1 R/W-1 R/W-0 R/W-0 R/W-0 R/W-0
ROI DOZE<2:0> DOZEN(1) FRCDIV<2:0>
bit 15 bit 8

R/W-0 R/W-1 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

PLLPOST<1:0> — PLLPRE<4:0>
bit 7 bit 0

Legend: y = Value set from Configuration bits on POR

R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15 ROI: Recover on Interrupt bit

1 = Interrupts will clear the DOZEN bit and the processor clock/peripheral clock ratio is set to 1:1
0 = Interrupts have no effect on the DOZEN bit
bit 14-12 DOZE<2:0>: Processor Clock Reduction Select bits
000 = FCY/1
001 = FCY/2
010 = FCY/4
011 = FCY/8 (default)
100 = FCY/16
101 = FCY/32
110 = FCY/64
111 = FCY/128
bit 11 DOZEN: DOZE Mode Enable bit(1)
1 = DOZE<2:0> field specifies the ratio between the peripheral clocks and the processor clocks
0 = Processor clock/peripheral clock ratio forced to 1:1
bit 10-8 FRCDIV<2:0>: Internal Fast RC Oscillator Postscaler bits
000 = FRC divide by 1 (default)
001 = FRC divide by 2
010 = FRC divide by 4
011 = FRC divide by 8
100 = FRC divide by 16
101 = FRC divide by 32
110 = FRC divide by 64
111 = FRC divide by 256
bit 7-6 PLLPOST<1:0>: PLL VCO Output Divider Select bits (also denoted as ‘N2’, PLL postscaler)
00 = Output/2
01 = Output/4 (default)
10 = Reserved
11 = Output/8
bit 5 Unimplemented: Read as ‘0’
bit 4-0 PLLPRE<4:0>: PLL Phase Detector Input Divider bits (also denoted as ‘N1’, PLL prescaler)
00000 = Input/2 (default)
00001 = Input/3
•
•
•
11111 = Input/33

Note 1: This bit is cleared when the ROI bit is set and an interrupt occurs.

DS70290B-page 100 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 7-3: PLLFBD: PLL FEEDBACK DIVISOR REGISTER

U-0 U-0 U-0 U-0 U-0 U-0 U-0 R/W-0
— — — — — — — PLLDIV<8>
bit 15 bit 8

R/W-0 R/W-0 R/W-1 R/W-1 R/W-0 R/W-0 R/W-0 R/W-0

PLLDIV<7:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-9 Unimplemented: Read as ‘0’

bit 8-0 PLLDIV<8:0>: PLL Feedback Divisor bits (also denoted as ‘M’, PLL multiplier)
000000000 = 2
000000001 = 3
000000010 = 4
•
•
•
000110000 = 50 (default)
•
•
•
111111111 = 513

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 101

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 7-4: OSCTUN: FRC OSCILLATOR TUNING REGISTER

U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
bit 15 bit 8

U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

— — TUN<5:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-6 Unimplemented: Read as ‘0’

bit 5-0 TUN<5:0>: FRC Oscillator Tuning bits
011111 = Center frequency + 11.625% (8.23 MHz)
011110 = Center frequency + 11.25% (8.20 MHz)
•
•
•
000001 = Center frequency + 0.375% (7.40 MHz)
000000 = Center frequency (7.37 MHz nominal)
111111 = Center frequency - 0.375% (7.345 MHz)
•
•
•
100001 = Center frequency - 11.625% (6.52 MHz)
100000 = Center frequency - 12% (6.49 MHz)

DS70290B-page 102 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

7.2 Clock Switching Operation 1. The clock switching hardware compares the
COSC status bits with the new value of the
Applications are free to switch among any of the four NOSC control bits. If they are the same, the
clock sources (Primary, LP, FRC and LPRC) under clock switch is a redundant operation. In this
software control at any time. To limit the possible side case, the OSWEN bit is cleared automatically
effects of this flexibility, dsPIC33FJ32GP202/204 and and the clock switch is aborted.
dsPIC33FJ16GP304 devices have a safeguard lock
2. If a valid clock switch has been initiated, the
built into the switch process.
LOCK (OSCCON<5>) and the CF
Note: Primary Oscillator mode has three different (OSCCON<3>) status bits are cleared.
submodes (XT, HS and EC), which are 3. The new oscillator is turned on by the hardware
determined by the POSCMD<1:0> if it is not currently running. If a crystal oscillator
Configuration bits. While an application must be turned on, the hardware waits until the
can switch to and from Primary Oscillator Oscillator Start-up Timer (OST) expires. If the
mode in software, it cannot switch among new source is using the PLL, the hardware waits
the different primary submodes without until a PLL lock is detected (LOCK = 1).
reprogramming the device. 4. The hardware waits for 10 clock cycles from the
new clock source and then performs the clock
7.2.1 ENABLING CLOCK SWITCHING switch.
To enable clock switching, the FCKSM1 Configuration 5. The hardware clears the OSWEN bit to indicate a
bit in the Configuration register must be programmed to successful clock transition. In addition, the NOSC
‘0’. (Refer to Section 18.1 “Configuration Bits” for bit values are transferred to the COSC status bits.
further details.) If the FCKSM1 Configuration bit is 6. The old clock source is turned off at this time,
unprogrammed (‘1’), the clock switching function and with the exception of LPRC (if WDT or FSCM
Fail-Safe Clock Monitor function are disabled. This is are enabled) or LP (if LPOSCEN remains set).
the default setting.
Note 1: The processor continues to execute code
The NOSC control bits (OSCCON<10:8>) do not throughout the clock switching sequence.
control the clock selection when clock switching is Timing-sensitive code should not be
disabled. However, the COSC bits (OSCCON<14:12>) executed during this time.
reflect the clock source selected by the FNOSC
Configuration bits. 2: Direct clock switches between any primary
oscillator mode with PLL and FRCPLL
The OSWEN control bit (OSCCON<0>) has no effect mode are not permitted. This applies to
when clock switching is disabled. It is held at ‘0’ at all clock switches in either direction. In these
times. instances, the application must switch to
FRC mode as a transition clock source
7.2.2 OSCILLATOR SWITCHING
between the two PLL modes.
SEQUENCE
Performing a clock switch requires this basic 7.3 Fail-Safe Clock Monitor (FSCM)
sequence:
1. If desired, read the COSC bits The Fail-Safe Clock Monitor (FSCM) allows the device
(OSCCON<14:12>) to determine the current to continue to operate even in the event of an oscillator
oscillator source. failure. The FSCM function is enabled by programming.
If the FSCM function is enabled, the LPRC internal
2. Perform the unlock sequence to allow a write to
oscillator runs at all times (except during Sleep mode)
the OSCCON register high byte.
and is not subject to control by the Watchdog Timer.
3. Write the appropriate value to the NOSC control
bits (OSCCON<10:8>) for the new oscillator In the event of an oscillator failure, the FSCM
source. generates a clock failure trap event and switches the
system clock over to the FRC oscillator. Then the
4. Perform the unlock sequence to allow a write to
application program can either attempt to restart the
the OSCCON register low byte.
oscillator or execute a controlled shutdown. The trap
5. Set the OSWEN bit to initiate the oscillator can be treated as a warm Reset by simply loading the
switch. Reset address into the oscillator fail trap vector.
Once the basic sequence is completed, the system If the PLL multiplier is used to scale the system clock,
clock hardware responds automatically as follows: the internal FRC is also multiplied by the same factor
on clock failure. Essentially, the device switches to
FRC with PLL on a clock failure.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 103

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

NOTES:

DS70290B-page 104 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

8.0 POWER-SAVING FEATURES 8.2 Instruction-Based Power-Saving

Modes
Note: This data sheet summarizes the features
of the dsPIC33FJ32GP202/204 and dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
dsPIC33FJ16GP304 family of devices. It devices have two special power-saving modes that are
is not intended to be a comprehensive entered through the execution of a special PWRSAV
reference source. To complement the instruction. Sleep mode stops clock operation and halts
information in this data sheet, refer to the all code execution. Idle mode halts the CPU and code
dsPIC33F Family Reference Manual, execution, but allows peripheral modules to continue
“Section 9. Watchdog Timer and Power operation. The Assembler syntax of the PWRSAV
Savings Modes” (DS70196), which is instruction is shown in Example 8-1.
available from the Microchip website
Note: SLEEP_MODE and IDLE_MODE are
(www.microchip.com).
constants defined in the assembler
The dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 include file for the selected device.
devices provide the ability to manage power Sleep and Idle modes can be exited as a result of an
consumption by selectively managing clocking to the enabled interrupt, WDT time-out or a device Reset.
CPU and the peripherals. In general, a lower clock When the device exits these modes, it is said to
frequency and a reduction in the number of circuits being wake-up.
clocked constitutes lower consumed power.
dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 8.2.1 SLEEP MODE
devices can manage power consumption in four different
ways: The following occur in Sleep mode:

• Clock frequency • The system clock source is shut down. If an

on-chip oscillator is used, it is turned off.
• Instruction-based Sleep and Idle modes
• The device current consumption is reduced to a
• Software-controlled Doze mode
minimum, provided that no I/O pin is sourcing
• Selective peripheral control in software current.
Combinations of these methods can be used to • The Fail-Safe Clock Monitor does not operate,
selectively tailor an application’s power consumption since the system clock source is disabled.
while still maintaining critical application features, such • The LPRC clock continues to run if the WDT is
as timing-sensitive communications. enabled.
• The WDT, if enabled, is automatically cleared
8.1 Clock Frequency and Clock prior to entering Sleep mode.
Switching • Some device features or peripherals may continue
dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 to operate. This includes items such as the input
devices allow a wide range of clock frequencies to be change notification on the I/O ports, or peripherals
selected under application control. If the system clock that use an external clock input.
configuration is not locked, users can choose • Any peripheral that requires the system clock
low-power or high-precision oscillators by simply source for its operation is disabled.
changing the NOSC bits (OSCCON<10:8>). The The device will wake-up from Sleep mode on any of the
process of changing a system clock during operation, these events:
as well as limitations to the process, are discussed in
• Any interrupt source that is individually enabled
more detail in Section 7.0 “Oscillator
Configuration”. • Any form of device Reset
• A WDT time-out
On wake-up from Sleep mode, the processor restarts
with the same clock source that was active when Sleep
mode was entered.

EXAMPLE 8-1: PWRSAV INSTRUCTION SYNTAX

PWRSAV #SLEEP_MODE ; Put the device into SLEEP mode
PWRSAV #IDLE_MODE ; Put the device into IDLE mode

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 105

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

8.2.2 IDLE MODE Doze mode is enabled by setting the DOZEN bit
(CLKDIV<11>). The ratio between peripheral and core
The following occur in Idle mode:
clock speed is determined by the DOZE<2:0> bits
• The CPU stops executing instructions. (CLKDIV<14:12>). There are eight possible
• The WDT is automatically cleared. configurations, from 1:1 to 1:128, with 1:1 being the
• The system clock source remains active. By default setting.
default, all peripheral modules continue to operate Programs can use Doze mode to selectively reduce
normally from the system clock source, but can power consumption in event-driven applications. This
also be selectively disabled (see Section 8.4 allows clock-sensitive functions, such as synchronous
“Peripheral Module Disable”). communications, to continue without interruption while
• If the WDT or FSCM is enabled, the LPRC also the CPU idles, waiting for something to invoke an
remains active. interrupt routine. An automatic return to full-speed CPU
The device will wake from Idle mode on any of these operation on interrupts can be enabled by setting the
events: ROI bit (CLKDIV<15>). By default, interrupt events
have no effect on Doze mode operation.
• Any interrupt that is individually enabled.
For example, suppose the device is operating at
• Any device Reset
20 MIPS and the CAN module has been configured for
• A WDT time-out 500 kbps based on this device operating speed. If the
On wake-up from Idle mode, the clock is reapplied to device is placed in Doze mode with a clock frequency
the CPU and instruction execution begins immediately, ratio of 1:4, the CAN module continues to communicate
starting with the instruction following the PWRSAV at the required bit rate of 500 kbps, but the CPU now
instruction, or the first instruction in the ISR. starts executing instructions at a frequency of 5 MIPS.

8.2.3 INTERRUPTS COINCIDENT WITH 8.4 Peripheral Module Disable

POWER SAVE INSTRUCTIONS
The Peripheral Module Disable (PMD) registers
Any interrupt that coincides with the execution of a provide a method to disable a peripheral module by
PWRSAV instruction is held off until entry into Sleep or stopping all clock sources supplied to that module.
Idle mode has completed. The device then wakes up When a peripheral is disabled using the appropriate
from Sleep or Idle mode. PMD control bit, the peripheral is in a minimum power
consumption state. The control and status registers
8.3 Doze Mode associated with the peripheral are also disabled, so
writes to those registers will have no effect and read
The preferred strategies for reducing power
values will be invalid.
consumption are changing clock speed and invoking
one of the power-saving modes. In some circumstances, A peripheral module is enabled only if both the
however, these are not practical. For example, it may be associated bit in the PMD register is cleared and the
necessary for an application to maintain uninterrupted peripheral is supported by the specific dsPIC® DSC
synchronous communication, even while it is doing variant. If the peripheral is present in the device, it is
nothing else. Reducing system clock speed can enabled in the PMD register by default.
introduce communication errors, while using a
Note: If a PMD bit is set, the corresponding
power-saving mode can stop communications
module is disabled after a delay of one
completely.
instruction cycle. Similarly, if a PMD bit is
Doze mode is a simple and effective alternative method cleared, the corresponding module is
to reduce power consumption while the device is still enabled after a delay of one instruction
executing code. In this mode, the system clock cycle (assuming the module control
continues to operate from the same source and at the registers are already configured to enable
same speed. Peripheral modules continue to be module operation).
clocked at the same speed, while the CPU clock speed
is reduced. Synchronization between the two clock
domains is maintained, allowing the peripherals to
access the SFRs while the CPU executes code at a
slower rate.

DS70290B-page 106 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 8-1: PMD1: PERIPHERAL MODULE DISABLE CONTROL REGISTER 1

U-0 U-0 R/W-0 R/W-0 R/W-0 U-0 U-0 U-0
— — T3MD T2MD T1MD — — —
bit 15 bit 8

R/W-0 U-0 R/W-0 U-0 R/W-0 U-0 U-0 R/W-0

I2C1MD — U1MD — SPI1MD — — AD1MD
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-14 Unimplemented: Read as ‘0’

bit 13 T3MD: Timer3 Module Disable bit
1 = Timer3 module is disabled
0 = Timer3 module is enabled
bit 12 T2MD: Timer2 Module Disable bit
1 = Timer2 module is disabled
0 = Timer2 module is enabled
bit 11 T1MD: Timer1 Module Disable bit
1 = Timer1 module is disabled
0 = Timer1 module is enabled
bit 10-8 Unimplemented: Read as ‘0’
bit 7 I2C1MD: I2C1 Module Disable bit
1 = I2C1 module is disabled
0 = I2C1 module is enabled
bit 6 Unimplemented: Read as ‘0’
bit 5 U1MD: UART1 Module Disable bit
1 = UART1 module is disabled
0 = UART1 module is enabled
bit 4 Unimplemented: Read as ‘0’
bit 3 SPI1MD: SPI1 Module Disable bit
1 = SPI1 module is disabled
0 = SPI1 module is enabled
bit 2-1 Unimplemented: Read as ‘0’
bit 0 AD1MD: ADC1 Module Disable bit
1 = ADC1 module is disabled
0 = ADC1 module is enabled

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 107

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 8-2: PMD2: PERIPHERAL MODULE DISABLE CONTROL REGISTER 2

R/W-0 R/W-0 U-0 U-0 U-0 U-0 R/W-0 R/W-0
IC8MD IC7MD — — — — IC2MD IC1MD
bit 15 bit 8

U-0 U-0 U-0 U-0 U-0 U-0 R/W-0 R/W-0

— — — — — — OC2MD OC1MD
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15 IC8MD: Input Capture 8 Module Disable bit

1 = Input Capture 8 module is disabled
0 = Input Capture 8 module is enabled
bit 14 IC7MD: Input Capture 2 Module Disable bit
1 = Input Capture 7 module is disabled
0 = Input Capture 7 module is enabled
bit 13-10 Unimplemented: Read as ‘0’
bit 9 IC2MD: Input Capture 2 Module Disable bit
1 = Input Capture 2 module is disabled
0 = Input Capture 2 module is enabled
bit 8 IC1MD: Input Capture 1 Module Disable bit
1 = Input Capture 1 module is disabled
0 = Input Capture 1 module is enabled
bit 7-2 Unimplemented: Read as ‘0’
bit 1 OC2MD: Output Compare 2 Module Disable bit
1 = Output Compare 2 module is disabled
0 = Output Compare 2 module is enabled
bit 0 OC1MD: Output Compare 1 Module Disable bit
1 = Output Compare 1 module is disabled
0 = Output Compare 1 module is enabled

DS70290B-page 108 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

9.0 I/O PORTS peripheral that shares the same pin. Figure 9-1 shows
how ports are shared with other peripherals and the
Note: This data sheet summarizes the features associated I/O pin to which they are connected.
of the dsPIC33FJ32GP202/204 and When a peripheral is enabled and the peripheral is
dsPIC33FJ16GP304 family of devices. It actively driving an associated pin, the use of the pin as
is not intended to be a comprehensive a general purpose output pin is disabled. The I/O pin
reference source. To complement the can be read, but the output driver for the parallel port bit
information in this data sheet, refer to the is disabled. If a peripheral is enabled, but the peripheral
dsPIC33F Family Reference Manual, is not actively driving a pin, that pin can be driven by a
“Section 10. I/O Ports” (DS70193), port.
which is available on Microchip website
(www.microchip.com). All port pins have three registers directly associated
with their operation as digital I/O. The data direction
All of the device pins (except VDD, VSS, MCLR and register (TRISx) determines whether the pin is an input
OSC1/CLKI) are shared among the peripherals and the or an output. If the data direction bit is a ‘1’, then the pin
parallel I/O ports. All I/O input ports feature Schmitt is an input. All port pins are defined as inputs after a
Trigger inputs for improved noise immunity. Reset. Reads from the latch (LATx) read the latch.
Writes to the latch, write the latch. Reads from the port
9.1 Parallel I/O (PIO) Ports (PORTx) read the port pins, while writes to the port pins
write the latch.
A parallel I/O port that shares a pin with a peripheral is
generally subservient to the peripheral. The Any bit and its associated data and control registers
peripheral’s output buffer data and control signals are that are not valid for a particular device will be
provided to a pair of multiplexers. The multiplexers disabled. That means the corresponding LATx and
select whether the peripheral or the associated port TRISx registers and the port pin will read as zeros.
has ownership of the output data and control signals of When a pin is shared with another peripheral or
the I/O pin. The logic also prevents “loop through”, in function that is defined as an input only, it is
which a port’s digital output can drive the input of a nevertheless regarded as a dedicated port because
there is no other competing source of outputs.

FIGURE 9-1: BLOCK DIAGRAM OF A TYPICAL SHARED PORT STRUCTURE

Peripheral Module Output Multiplexers
Peripheral Input Data

Peripheral Module Enable

I/O
Peripheral Output Enable 1 Output Enable
Peripheral Output Data
0

PIO Module 1
Output Data
Read TRIS 0

Data Bus D Q I/O Pin

WR TRIS CK
TRIS Latch

D Q

WR LAT +
WR Port CK
Data Latch

Read LAT

Input Data

Read Port

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 109

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

9.1.1 OPEN-DRAIN CONFIGURATION TABLE 9-1: AVAILABLE I/O PINS AND

In addition to the PORT, LAT and TRIS registers for THEIR FUNCTIONALITY
data control, some port pins can also be individually I/O Pin Digital-Only/5V Tolerant
configured for either digital or open-drain output. This is
controlled by the Open-Drain Control register, ODCx, RA0 No
associated with each port. Setting any of the bits RA1 No
configures the corresponding pin to act as an RA2 No
open-drain output.
RA3 No
The open-drain feature allows the generation of RA4 No
outputs higher than VDD (e.g., 5V) on any desired
digital-only pins by using external pull-up resistors. The RA7 Yes
maximum open-drain voltage allowed is the same as RA8 Yes
the maximum VIH specification. RA9 Yes
Some I/O pins may have internal analog functionality RA10 Yes
that will not be shown on the device pin diagram. RB0 No
These pins must be treated as analog pins. Table 9-1
lists all available pins and their functionality. RB1 No
RB2 No
RB3 No
RB4 Yes
RB5 Yes
RB6 Yes
RB7 Yes
RB8 Yes
RB9 Yes
RB10 Yes
RB11 Yes
RB12 No
RB13 No
RB14 No
RB15 No
RC0 No
RC1 No
RC2 No
RC3 Yes
RC4 Yes
RC5 Yes
RC6 Yes
RC7 Yes
RC8 Yes
RC9 Yes

DS70290B-page 110 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

9.2 Configuring Analog Port Pins 9.3 Input Change Notification

The AD1PCFG and TRIS registers control the The input change notification function of the I/O ports
operation of the analog-to-digital (A/D) port pins. The allows the dsPIC33FJ32GP202/204 and
port pins that are desired as analog inputs must have dsPIC33FJ16GP304 devices to generate interrupt
their corresponding TRIS bit set (input). If the TRIS bit requests to the processor in response to a
is cleared (output), the digital output level (VOH or VOL) change-of-state on selected input pins. This feature
will be converted. can detect input change-of-states even in Sleep mode,
When the PORT register is read, all pins configured as when the clocks are disabled. Depending on the device
analog input channels will read as cleared (a low level). pin count, up to 31 external signals (CNx pin) can be
selected (enabled) for generating an interrupt request
Pins configured as digital inputs will not convert an on a change-of-state.
analog input. Analog levels on any pin that is defined as
a digital input (including the ANx pins) can cause the Four control registers are associated with the CN
input buffer to consume current that exceeds the module. The CNEN1 and CNEN2 registers contain the
device specifications. interrupt enable control bits for each of the CN input
pins. Setting any of these bits enables a CN interrupt
9.2.1 I/O PORT WRITE/READ TIMING for the corresponding pins.
One instruction cycle is required between a port Each CN pin also has a weak pull-up connected to it.
direction change or port write operation and a read The pull-ups act as a current source connected to the
operation of the same port. Typically this instruction pin, and eliminate the need for external resistors when
would be a NOP. An example is shown in Example 9-1. push button or keypad devices are connected. The
pull-ups are enabled separately using the CNPU1 and
CNPU2 registers, which contain the control bits for
each of the CN pins. Setting any of the control bits
enables the weak pull-ups for the corresponding pins.
Note: Pull-ups on change notification pins
should always be disabled when the port
pin is configured as a digital output.

EXAMPLE 9-1: PORT WRITE/READ EXAMPLE

MOV 0xFF00, W0 ; Configure PORTB<15:8> as inputs
MOV W0, TRISBB ; and PORTB<7:0> as outputs
NOP ; Delay 1 cycle
btss PORTB, #13 ; Next Instruction

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 111

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

9.4 Peripheral Pin Select 9.4.2 CONTROLLING PERIPHERAL PIN

SELECT
A major challenge in general-purpose devices is
providing the largest possible set of peripheral features Peripheral pin select features are controlled through
while minimizing the conflict of features on I/O pins. two sets of special function registers: one to map
The challenge is even greater on low-pin count peripheral inputs, and one to map outputs. Because
devices. In an application where more than one they are separately controlled, a particular peripheral’s
peripheral must be assigned to a single pin, input and output (if the peripheral has both) can be
inconvenient workarounds in application code or a placed on any selectable function pin without
complete redesign may be the only option. constraint.
Peripheral pin select configuration enables peripheral The association of a peripheral to a peripheral
set selection and placement on a wide range of I/O selectable pin is handled in two different ways,
pins. By increasing the pinout options available on a depending on whether an input or output is being
particular device, programmers can better tailor the mapped.
microcontroller to their entire application, rather than
trimming the application to fit the device. 9.4.2.1 Input Mapping
The peripheral pin select configuration feature The inputs of the peripheral pin select options are
operates over a fixed subset of digital I/O pins. mapped on the basis of the peripheral. A control
Programmers can independently map the input and/or register associated with a peripheral dictates the pin it
output of most digital peripherals to any one of these will be mapped to. The RPINRx registers are used to
I/O pins. Peripheral pin select is performed in software, configure peripheral input mapping (see Register 9-1
and generally does not require the device to be through Register 9-9). Each register contains sets of
reprogrammed. Hardware safeguards are included that 5-bit fields, with each set associated with one of the
prevent accidental or spurious changes to the remappable peripherals. Programming a given
peripheral mapping, once it has been established. peripheral’s bit field with an appropriate 5-bit value
maps the RPn pin with that value to that peripheral. For
9.4.1 AVAILABLE PINS any given device, the valid range of values for any bit
field corresponds to the maximum number of peripheral
The peripheral pin select feature is used with a range
pin selections supported by the device.
of up to 26 pins. The number of available pins depends
on the particular device and its pin count. Pins that Figure 9-2 Illustrates remappable pin selection for
support the peripheral pin select feature include the U1RX input.
designation “RPn” in their full pin designation, where
“RP” designates a remappable peripheral and “n” is the
remappable pin number.

FIGURE 9-2: REMAPPABLE MUX INPUT FOR U1RX

U1RXR<4:0>

0
RP0

1
RP1
U1RX input
to peripheral
2
RP2

25
RP25

DS70290B-page 112 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 9-2: REMAPPABLE PERIPHERAL INPUTS(1)

Configuration
Input Name Function Name Register
Bits
External Interrupt 1 INT1 RPINR0 INT1R<4:0>
External Interrupt 2 INT2 RPINR1 INT2R<4:0>
Timer2 External Clock T2CK RPINR3 T2CKR<4:0>
Timer3 External Clock T3CK RPINR3 T3CKR<4:0>
Input Capture 1 IC1 RPINR7 IC1R<4:0>
Input Capture 2 IC2 RPINR7 IC2R<4:0>
Input Capture 7 IC7 RPINR10 IC7R<4:0>
Input Capture 8 IC8 RPINR10 IC8R<4:0>
Output Compare Fault A OCFA RPINR11 OCFAR<4:0>
UART1 Receive U1RX RPINR18 U1RXR<4:0>
UART1 Clear To Send U1CTS RPINR18 U1CTSR<4:0>
SPI1 Data Input SDI1 RPINR20 SDI1R<4:0>
SPI1 Clock Input SCK1IN RPINR20 SCK1R<4:0>
SPI1 Slave Select Input SS1IN RPINR21 SS1R<4:0>
Note 1: Unless otherwise noted, all inputs use the Schmitt input buffers.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 113

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

9.4.2.2 Output Mapping value of the bit field corresponds to one of the periph-
erals, and that peripheral’s output is mapped to the pin
In contrast to inputs, the outputs of the peripheral pin
(see Table 9-3 and Figure 9-3).
select options are mapped on the basis of the pin. In
this case, a control register associated with a particular The list of peripherals for output mapping also includes
pin dictates the peripheral output to be mapped. The a null value of ‘00000’ because of the mapping
RPORx registers are used to control output mapping. technique. This permits any given pin to remain
Like the RPINRx registers, each register contains sets unconnected from the output of any of the pin
of 5-bit fields, with each set associated with one RPn selectable peripherals.
pin (see Register 9-10 through Register 9-22). The

FIGURE 9-3: MULTIPLEXING OF REMAPPABLE OUTPUT FOR RPn

RPnR<4:0>

Default
0
U1TX Output enable
3
U1RTS Output enable 4
Output enable

OC1 Output enable

18
OC2 Output enable
19

Default
0
U1TX Output
3
U1RTS Output 4
RPn
Output Data

OC1 Output
18
OC2 Output
19

TABLE 9-3: OUTPUT SELECTION FOR REMAPPABLE PIN (RPn)

Function RPnR<4:0> Output Name
NULL 00000 RPn tied to default port pin
U1TX 00011 RPn tied to UART1 Transmit
U1RTS 00100 RPn tied to UART1 Ready To Send
SDO1 00111 RPn tied to SPI1 Data Output
SCK1OUT 01000 RPn tied to SPI1 Clock Output
SS1OUT 01001 RPn tied to SPI1 Slave Select Output
OC1 10010 RPn tied to Output Compare 1
OC2 10011 RPn tied to Output Compare 2

DS70290B-page 114 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

9.4.3 CONTROLLING CONFIGURATION Unlike the similar sequence with the oscillator’s LOCK
CHANGES bit, IOLOCK remains in one state until changed. This
allows all of the peripheral pin selects to be configured
Because peripheral remapping can be changed during
with a single unlock sequence followed by an update to
run time, some restrictions on peripheral remapping
all control registers, then locked with a second lock
are needed to prevent accidental configuration
sequence.
changes. dsPIC33F devices include three features to
prevent alterations to the peripheral map: 9.4.3.2 Continuous State Monitoring
• Control register lock sequence In addition to being protected from direct writes, the
• Continuous state monitoring contents of the RPINRx and RPORx registers are
• Configuration bit pin select lock constantly monitored in hardware by shadow registers.
If an unexpected change in any of the registers occurs
9.4.3.1 Control Register Lock (such as cell disturbances caused by ESD or other
Under normal operation, writes to the RPINRx and external events), a configuration mismatch Reset will
RPORx registers are not allowed. Attempted writes be triggered.
appear to execute normally, but the contents of the
registers remain unchanged. To change these 9.4.3.3 Configuration Bit Pin Select Lock
registers, they must be unlocked in hardware. The As an additional level of safety, the device can be
register lock is controlled by the IOLOCK bit configured to prevent more than one write session to
(OSCCON<6>). Setting IOLOCK prevents writes to the the RPINRx and RPORx registers. The IOL1WAY
control registers; clearing IOLOCK allows writes. (FOSC<IOL1WAY>) configuration bit blocks the
To set or clear IOLOCK, a specific command sequence IOLOCK bit from being cleared after it has been set
must be executed: once.

1. Write 0x46 to OSCCON<7:0>. In the default (unprogrammed) state, IOL1WAY is set,

restricting users to one write session. Programming
2. Write 0x57 to OSCCON<7:0>.
IOL1WAY allows user applications unlimited access
3. Clear (or set) IOLOCK as a single operation. (with the proper use of the unlock sequence) to the
Note: MPLAB® C30 provides built-in C language peripheral pin select registers.
functions for unlocking the OSCCON
register:
__builtin_write_OSCCONL(value)
__builtin_write_OSCCONH(value)
See MPLAB IDE Help for more
information.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 115

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

9.5 Peripheral Pin Select Registers

The dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
devices implement 17 registers for remappable
peripheral configuration:
• Input Remappable Peripheral Registers (9)
• Output Remappable Peripheral Registers (8)

Note: Input and Output Register values can only

be changed if OSCCON[IOLOCK] = 0.
See Section 9.4.3.1 “Control Register
Lock” for a specific command sequence.

REGISTER 9-1: RPINR0: PERIPHERAL PIN SELECT INPUT REGISTER 0

U-0 U-0 U-0 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1
— — — INT1R<4:0>
bit 15 bit 8

U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0

— — — — — — — —
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-13 Unimplemented: Read as ‘0’

bit 12-8 INT1R<4:0>: Assign External Interrupt 1 (INTR1) to the corresponding RPn pin
11111 = Input tied to Vss
11001 = Input tied to RP25
•
•
•
00001 = Input tied to RP1
00000 = Input tied to RP0
bit 7-0 Unimplemented: Read as ‘0’

DS70290B-page 116 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 9-2: RPINR1: PERIPHERAL PIN SELECT INPUT REGISTER 1

U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
bit 15 bit 8

U-0 U-0 U-0 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1

— — — INT2R<4:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-5 Unimplemented: Read as ‘0’

bit 4-0 INT2R<4:0>: Assign External Interrupt 2 (INTR2) to the corresponding RPn pin
11111 = Input tied to Vss
11001 = Input tied to RP25
•
•
•
00001 = Input tied to RP1
00000 = Input tied to RP0

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 117

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 9-3: RPINR3: PERIPHERAL PIN SELECT INPUT REGISTER 3

U-0 U-0 U-0 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1
— — — T3CKR<4:0>
bit 15 bit 8

U-0 U-0 U-0 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1

— — — T2CKR<4:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-13 Unimplemented: Read as ‘0’

bit 12-8 T3CKR<4:0>: Assign Timer3 External Clock (T3CK) to the Corresponding RPn pin
11111 = Input tied to Vss
11001 = Input tied to RP25
•
•
•
00001 = Input tied to RP1
00000 = Input tied to RP0
bit 7-5 Unimplemented: Read as ‘0’
bit 4-0 T2CKR<4:0>: Assign Timer2 External Clock (T2CK) to the Corresponding RPn pin
11111 = Input tied to Vss
11001 = Input tied to RP25
•
•
•
00001 = Input tied to RP1
00000 = Input tied to RP0

DS70290B-page 118 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 9-4: RPINR7: PERIPHERAL PIN SELECT INPUT REGISTER 7

U-0 U-0 U-0 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1
— — — IC2R<4:0>
bit 15 bit 8

U-0 U-0 U-0 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1

— — — IC1R<4:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-13 Unimplemented: Read as ‘0’

bit 12-8 IC2R<4:0>: Assign Input Capture 2 (IC2) to the corresponding RPn pin
11111 = Input tied to Vss
11001 = Input tied to RP25
•
•
•
00001 = Input tied to RP1
00000 = Input tied to RP0
bit 7-5 Unimplemented: Read as ‘0’
bit 4-0 IC1R<4:0>: Assign Input Capture 1 (IC1) to the corresponding RPn pin
11111 = Input tied to Vss
11001 = Input tied to RP25
•
•
•
00001 = Input tied to RP1
00000 = Input tied to RP0

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 119

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 9-5: RPINR10: PERIPHERAL PIN SELECT INPUT REGISTERS 10

U-0 U-0 U-0 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1
— — — IC8R<4:0>
bit 15 bit 8

U-0 U-0 U-0 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1

— — — IC7R<4:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-13 Unimplemented: Read as ‘0’

bit 12-8 IC8R<4:0>: Assign Input Capture 8 (IC8) to the corresponding pin RPn pin
11111 = Input tied to Vss
11001 = Input tied to RP25
•
•
•
00001 = Input tied to RP1
00000 = Input tied to RP0
bit 7-5 Unimplemented: Read as ‘0’
bit 4-0 IC7R<4:0>: Assign Input Capture 7 (IC7) to the corresponding pin RPn pin
11111 = Input tied to Vss
11001 = Input tied to RP25
•
•
•
00001 = Input tied to RP1
00000 = Input tied to RP0

DS70290B-page 120 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 9-6: RPINR11: PERIPHERAL PIN SELECT INPUT REGISTER 11

U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
bit 15 bit 8

U-0 U-0 U-0 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1

— — — OCFAR<4:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-5 Unimplemented: Read as ‘0’

bit 4-0 OCFAR<4:0>: Assign Output Capture A (OCFA) to the corresponding RPn pin
11111 = Input tied to Vss
11001 = Input tied to RP25
•
•
•
00001 = Input tied to RP1
00000 = Input tied to RP0

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 121

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 9-7: RPINR18: PERIPHERAL PIN SELECT INPUT REGISTER 18

U-0 U-0 U-0 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1
— — — U1CTSR<4:0>
bit 15 bit 8

U-0 U-0 U-0 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1

— — — U1RXR<4:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-13 Unimplemented: Read as ‘0’

bit 12-8 U1CTSR<4:0>: Assign UART 1 Clear to Send (U1CTS) to the corresponding RPn pin
11111 = Input tied to Vss
11001 = Input tied to RP25
•
•
•
00001 = Input tied to RP1
00000 = Input tied to RP0
bit 7-5 Unimplemented: Read as ‘0’
bit 4-0 U1RXR<4:0>: Assign UART 1 Receive (U1RX) to the corresponding RPn pin
11111 = Input tied to Vss
11001 = Input tied to RP25
•
•
•
00001 = Input tied to RP1
00000 = Input tied to RP0

DS70290B-page 122 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 9-8: RPINR20: PERIPHERAL PIN SELECT INPUT REGISTER 20

U-0 U-0 U-0 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1
— — — SCK1R<4:0>
bit 15 bit 8

U-0 U-0 U-0 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1

— — — SDI1R<4:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-13 Unimplemented: Read as ‘0’

bit 12-8 SCK1R<4:0>: Assign SPI 1 Clock Input (SCK1IN) to the corresponding RPn pin
11111 = Input tied to Vss
11001 = Input tied to RP25
•
•
•
00001 = Input tied to RP1
00000 = Input tied to RP0
bit 7-5 Unimplemented: Read as ‘0’
bit 4-0 SDI1R<4:0>: Assign SPI 1 Data Input (SDI1) to the corresponding RPn pin
11111 = Input tied to Vss
11001 = Input tied to RP25
•
•
•
00001 = Input tied to RP1
00000 = Input tied to RP0

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 123

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 9-9: RPINR21: PERIPHERAL PIN SELECT INPUT REGISTER 21

U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
bit 15 bit 8

U-0 U-0 U-0 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1

— — — SS1R<4:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-5 Unimplemented: Read as ‘0’

bit 4-0 SS1R<4:0>: Assign SPI1 Slave Select Input (SS1IN) to the Corresponding RPn pin
11111 = Input tied to Vss
11001 = Input tied to RP25
•
•
•
00001 = Input tied to RP1
00000 = Input tied to RP0

DS70290B-page 124 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 9-10: RPOR0: PERIPHERAL PIN SELECT OUTPUT REGISTERS 0

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
— — — RP1R<4:0>
bit 15 bit 8

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

— — — RP0R<4:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-13 Unimplemented: Read as ‘0’

bit 12-8 RP1R<4:0>: Peripheral Output Function is Assigned to RP1 Output Pin (see Table 9-3 for peripheral
function numbers)
bit 7-5 Unimplemented: Read as ‘0’
bit 4-0 RP0R<4:0>: Peripheral Output Function is Assigned to RP0 Output Pin (see Table 9-3 for peripheral
function numbers)

REGISTER 9-11: RPOR1: PERIPHERAL PIN SELECT OUTPUT REGISTERS 1

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
— — — RP3R<4:0>
bit 15 bit 8

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

— — — RP2R<4:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-13 Unimplemented: Read as ‘0’

bit 12-8 RP3R<4:0>: Peripheral Output Function is Assigned to RP3 Output Pin (see Table 9-3 for peripheral
function numbers)
bit 7-5 Unimplemented: Read as ‘0’
bit 4-0 RP2R<4:0>: Peripheral Output Function is Assigned to RP2 Output Pin (see Table 9-3 for peripheral
function numbers)

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 125

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 9-12: RPOR2: PERIPHERAL PIN SELECT OUTPUT REGISTERS 2

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
— — — RP5R<4:0>
bit 15 bit 8

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

— — — RP4R<4:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-13 Unimplemented: Read as ‘0’

bit 12-8 RP5R<4:0>: Peripheral Output Function is Assigned to RP5 Output Pin (see Table 9-3 for peripheral
function numbers)
bit 7-5 Unimplemented: Read as ‘0’
bit 4-0 RP4R<4:0>: Peripheral Output Function is Assigned to RP4 Output Pin (see Table 9-3 for peripheral
function numbers)

REGISTER 9-13: RPOR3: PERIPHERAL PIN SELECT OUTPUT REGISTERS 3

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
— — — RP7R<4:0>
bit 15 bit 8

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

— — — RP6R<4:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-13 Unimplemented: Read as ‘0’

bit 12-8 RP7R<4:0>: Peripheral Output Function is Assigned to RP7 Output Pin (see Table 9-3 for peripheral
function numbers)
bit 7-5 Unimplemented: Read as ‘0’
bit 4-0 RP6R<4:0>: Peripheral Output Function is Assigned to RP6 Output Pin (see Table 9-3 for peripheral
function numbers)

DS70290B-page 126 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 9-14: RPOR4: PERIPHERAL PIN SELECT OUTPUT REGISTERS 4

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
— — — RP9R<4:0>
bit 15 bit 8

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

— — — RP8R<4:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-13 Unimplemented: Read as ‘0’

bit 12-8 RP9R<4:0>: Peripheral Output Function is Assigned to RP9 Output Pin (see Table 9-3 for peripheral
function numbers)
bit 7-5 Unimplemented: Read as ‘0’
bit 4-0 RP8R<4:0>: Peripheral Output Function is Assigned to RP8 Output Pin (see Table 9-3 for peripheral
function numbers)

REGISTER 9-15: RPOR5: PERIPHERAL PIN SELECT OUTPUT REGISTERS 5

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
— — — RP11R<4:0>
bit 15 bit 8

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

— — — RP10R<4:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-13 Unimplemented: Read as ‘0’

bit 12-8 RP11R<4:0>: Peripheral Output Function is Assigned to RP11 Output Pin (see Table 9-3 for peripheral
function numbers)
bit 7-5 Unimplemented: Read as ‘0’
bit 4-0 RP10R<4:0>: Peripheral Output Function is Assigned to RP10 Output Pin (see Table 9-3 for
peripheral function numbers)

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 127

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 9-16: RPOR6: PERIPHERAL PIN SELECT OUTPUT REGISTERS 6

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
— — — RP13R<4:0>
bit 15 bit 8

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

— — — RP12R<4:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-13 Unimplemented: Read as ‘0’

bit 12-8 RP13R<4:0>: Peripheral Output Function is Assigned to RP13 Output Pin (see Table 9-3 for
peripheral function numbers)
bit 7-5 Unimplemented: Read as ‘0’
bit 4-0 RP12R<4:0>: Peripheral Output Function is Assigned to RP12 Output Pin (see Table 9-3 for
peripheral function numbers)

REGISTER 9-17: RPOR7: PERIPHERAL PIN SELECT OUTPUT REGISTERS 7

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
— — — RP15R<4:0>
bit 15 bit 8

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

— — — RP14R<4:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-13 Unimplemented: Read as ‘0’

bit 12-8 RP15R<4:0>: Peripheral Output Function is Assigned to RP15 Output Pin (see Table 9-3 for
peripheral function numbers)
bit 7-5 Unimplemented: Read as ‘0’
bit 4-0 RP14R<4:0>: Peripheral Output Function is Assigned to RP14 Output Pin (see Table 9-3 for
peripheral function numbers)

DS70290B-page 128 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 9-18: RPOR8: PERIPHERAL PIN SELECT OUTPUT REGISTERS 8

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
— — — RP17R<4:0>
bit 15 bit 8

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

— — — RP16R<4:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-13 Unimplemented: Read as ‘0’

bit 12-8 RP17R<4:0>: Peripheral Output Function is Assigned to RP17 Output Pin (see Table 9-3 for
peripheral function numbers)
bit 7-5 Unimplemented: Read as ‘0’
bit 4-0 RP16R<4:0>: Peripheral Output Function is Assigned to RP16 Output Pin (see Table 9-3 for
peripheral function numbers)

REGISTER 9-19: RPOR9: PERIPHERAL PIN SELECT OUTPUT REGISTERS 9

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
— — — RP19R<4:0>
bit 15 bit 8

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

— — — RP18R<4:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-13 Unimplemented: Read as ‘0’

bit 12-8 RP19R<4:0>: Peripheral Output Function is Assigned to RP19 Output Pin (see Table 9-3 for
peripheral function numbers)
bit 7-5 Unimplemented: Read as ‘0’
bit 4-0 RP18R<4:0>: Peripheral Output Function is Assigned to RP18 Output Pin (see Table 9-3 for
peripheral function numbers)

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 129

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 9-20: RPOR10: PERIPHERAL PIN SELECT OUTPUT REGISTERS 10

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
— — — RP21R<4:0>
bit 15 bit 8

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

— — — RP20R<4:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-13 Unimplemented: Read as ‘0’

bit 12-8 RP21R<4:0>: Peripheral Output Function is Assigned to RP21 Output Pin (see Table 9-3 for
peripheral function numbers)
bit 7-5 Unimplemented: Read as ‘0’
bit 4-0 RP20R<4:0>: Peripheral Output Function is Assigned to RP20 Output Pin (see Table 9-3 for
peripheral function numbers)

REGISTER 9-21: RPOR11: PERIPHERAL PIN SELECT OUTPUT REGISTERS 11

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
— — — RP23R<4:0>
bit 15 bit 8

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

— — — RP22R<4:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-13 Unimplemented: Read as ‘0’

bit 12-8 RP23R<4:0>: Peripheral Output Function is Assigned to RP23 Output Pin (see Table 9-3 for
peripheral function numbers)
bit 7-5 Unimplemented: Read as ‘0’
bit 4-0 RP22R<4:0>: Peripheral Output Function is Assigned to RP22 Output Pin (see Table 9-3 for
peripheral function numbers)

DS70290B-page 130 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 9-22: RPOR12: PERIPHERAL PIN SELECT OUTPUT REGISTERS 12

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
— — — RP25R<4:0>
bit 15 bit 8

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

— — — RP24R<4:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-13 Unimplemented: Read as ‘0’

bit 12-8 RP25R<4:0>: Peripheral Output Function is Assigned to RP25 Output Pin (see Table 9-3 for
peripheral function numbers)
bit 7-5 Unimplemented: Read as ‘0’
bit 4-0 RP24R<4:0>: Peripheral Output Function is Assigned to RP24 Output Pin (see Table 9-3 for
peripheral function numbers)

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 131

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

NOTES:

DS70290B-page 132 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

10.0 TIMER1 • Selectable prescaler settings

• Timer operation during CPU Idle and Sleep
Note: This data sheet summarizes the features modes
of the dsPIC33FJ32GP202/204 and • Interrupt on 16-bit Period register match or falling
dsPIC33FJ16GP304 family of devices. It edge of external gate signal
is not intended to be a comprehensive
reference source. To complement the Figure 10-1 presents a block diagram of the 16-bit
information in this data sheet, refer to the timer module.
dsPIC33F Family Reference Manual, To configure Timer1 for operation:
“Section 11. Timers” (DS70205), which
1. Set the TON bit (= 1) in the T1CON register.
is available from the Microchip website
(www.microchip.com). 2. Select the timer prescaler ratio using the
TCKPS<1:0> bits in the T1CON register.
The Timer1 module is a 16-bit timer, which can serve 3. Set the Clock and Gating modes using the TCS
as the time counter for the real-time clock, or operate and TGATE bits in the T1CON register.
as a free-running interval timer/counter. Timer1 can
4. Set or clear the TSYNC bit in T1CON to select
operate in three modes:
synchronous or asynchronous operation.
• 16-bit Timer 5. Load the timer period value into the PR1
• 16-bit Synchronous Counter register.
• 16-bit Asynchronous Counter 6. If interrupts are required, set the interrupt enable
Timer1 also supports these features: bit, T1IE. Use the priority bits, T1IP<2:0>, to set
the interrupt priority.
• Timer gate operation

FIGURE 10-1: 16-BIT TIMER1 MODULE BLOCK DIAGRAM

TCKPS<1:0>
SOSCO/ TON 2
1x
T1CK
Gate Prescaler
SOSCEN Sync 01 1, 8, 64, 256

SOSCI
TCY 00

TGATE
TGATE TCS

1 Q D
Set T1IF
0 Q CK

0
Reset
TMR1
1 Sync

Comparator TSYNC
Equal

PR1

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 133

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 10-1: T1CON: TIMER1 CONTROL REGISTER

R/W-0 U-0 R/W-0 U-0 U-0 U-0 U-0 U-0
TON — TSIDL — — — — —
bit 15 bit 8

U-0 R/W-0 R/W-0 R/W-0 U-0 R/W-0 R/W-0 U-0

— TGATE TCKPS<1:0> — TSYNC TCS —
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15 TON: Timer1 On bit

1 = Starts 16-bit Timer1
0 = Stops 16-bit Timer1
bit 14 Unimplemented: Read as ‘0’
bit 13 TSIDL: Stop in Idle Mode bit
1 = Discontinue module operation when device enters Idle mode
0 = Continue module operation in Idle mode
bit 12-7 Unimplemented: Read as ‘0’
bit 6 TGATE: Timer1 Gated Time Accumulation Enable bit
When T1CS = 1:
This bit is ignored.
When T1CS = 0:
1 = Gated time accumulation enabled
0 = Gated time accumulation disabled
bit 5-4 TCKPS<1:0> Timer1 Input Clock Prescale Select bits
11 = 1:256
10 = 1:64
01 = 1:8
00 = 1:1
bit 3 Unimplemented: Read as ‘0’
bit 2 TSYNC: Timer1 External Clock Input Synchronization Select bit
When TCS = 1:
1 = Synchronize external clock input
0 = Do not synchronize external clock input
When TCS = 0:
This bit is ignored.
bit 1 TCS: Timer1 Clock Source Select bit
1 = External clock from pin T1CK (on the rising edge)
0 = Internal clock (FCY)
bit 0 Unimplemented: Read as ‘0’

DS70290B-page 134 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

11.0 TIMER2/3 FEATURE 11.1 32-bit Operation

Note: This data sheet summarizes the features To configure the Timer2/3 feature for 32-bit operation:
of the dsPIC33FJ32GP202/204 and 1. Set the corresponding T32 control bit.
dsPIC33FJ16GP304 family of devices. It 2. Select the prescaler ratio for Timer2 using the
is not intended to be a comprehensive TCKPS<1:0> bits.
reference source. To complement the
3. Set the Clock and Gating modes using the
information in this data sheet, refer to the
corresponding TCS and TGATE bits.
dsPIC33F Family Reference Manual,
“Section 11. Timers” (DS70205), which 4. Load the timer period value. PR3 contains the
is available from the Microchip website most significant word of the value, while PR2
(www.microchip.com). contains the least significant word.
5. If interrupts are required, set the interrupt enable
The Timer2/3 feature has 32-bit timers that can also be bit, T3IE. Use the priority bits T3IP<2:0> to set
configured as two independent 16-bit timers with the interrupt priority. While Timer2 controls the
selectable operating modes. timer, the interrupt appears as a Timer3 inter-
As a 32-bit timer, the Timer2/3 feature permits rupt.
operation in three modes: 6. Set the corresponding TON bit.
• Two Independent 16-bit timers (Timer2 and The timer value at any point is stored in the register pair
Timer3) with all 16-bit operating modes (except TMR3:TMR2. TMR3 always contains the most
Asynchronous Counter mode) significant word of the count, while TMR2 contains the
• Single 32-bit timer (Timer2/3) least significant word.
• Single 32-bit synchronous counter (Timer2/3) To configure any of the timers for individual 16-bit
The Timer2/3 feature also supports: operation:
• Timer gate operation 1. Clear the T32 bit corresponding to that timer.
• Selectable Prescaler Settings 2. Select the timer prescaler ratio using the
TCKPS<1:0> bits.
• Timer operation during Idle and Sleep modes
3. Set the Clock and Gating modes using the TCS
• Interrupt on a 32-bit Period Register Match
and TGATE bits.
• Time Base for Input Capture and Output Compare
4. Load the timer period value into the PRx
Modules (Timer2 and Timer3 only)
register.
• ADC1 Event Trigger (Timer2/3 only)
5. If interrupts are required, set the interrupt enable
Individually, all eight of the 16-bit timers can function as bit, TxIE. Use the priority bits, TxIP<2:0>, to set
synchronous timers or counters. They also offer the the interrupt priority.
features listed above, except for the event trigger. The 6. Set the TON bit.
operating modes and enabled features are determined
by setting the appropriate bit(s) in the T2CON and
T3CON registers. T2CON registers are shown in
generic form in Register 11-1. T3CON registers are
shown in Register 11-2.
For 32-bit timer/counter operation, Timer2 is the least
significant word (lsw), and Timer3 is the most
significant word (msw) of the 32-bit timers.
Note: For 32-bit operation, T3CON control bits
are ignored. Only T2CON control bit is
used for setup and control. Timer2 clock
and gate inputs are used for the 32-bit
timer modules, but an interrupt is
generated with the Timer3 interrupt flags.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 135

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

FIGURE 11-1: TIMER2/3 (32-BIT) BLOCK DIAGRAM(1)

TCKPS<1:0>
TON 2
T2CK 1x

Gate Prescaler
Sync 01 1, 8, 64, 256

TCY 00
TGATE TGATE
TCS

1 Q D
Set T3IF
Q CK
0

PR3 PR2

ADC Event Trigger(2)

Equal
Comparator

MSb LSb

TMR3 TMR2 Sync

Reset

16

Read TMR2
Write TMR2
16
16
TMR3HLD

16

Data Bus<15:0>

Note 1: The 32-bit timer control bit, T32, must be set for 32-bit timer/counter operation. All control bits are respective
to the T2CON register.
2: The ADC event trigger is available only on Timer2/3.

DS70290B-page 136 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

FIGURE 11-2: TIMER2 (16-BIT) BLOCK DIAGRAM

TCKPS<1:0>
TON 2
T2CK 1x

Gate Prescaler
Sync 01 1, 8, 64, 256

TGATE 00

TCY TCS
1 Q D TGATE
Set T2IF Q CK
0

Reset
TMR2 Sync

Comparator
Equal

PR2

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 137

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 11-1: T2CON CONTROL REGISTER

R/W-0 U-0 R/W-0 U-0 U-0 U-0 U-0 U-0
TON — TSIDL — — — — —
bit 15 bit 8

U-0 R/W-0 R/W-0 R/W-0 R/W-0 U-0 R/W-0 U-0

— TGATE TCKPS<1:0> T32(1) — TCS —
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15 TON: Timer2 On bit

When T32 = 1:
1 = Starts 32-bit Timer2/3
0 = Stops 32-bit Timer2/3
When T32 = 0:
1 = Starts 16-bit Timer2
0 = Stops 16-bit Timer2
bit 14 Unimplemented: Read as ‘0’
bit 13 TSIDL: Stop in Idle Mode bit
1 = Discontinue module operation when device enters Idle mode
0 = Continue module operation in Idle mode
bit 12-7 Unimplemented: Read as ‘0’
bit 6 TGATE: Timer2 Gated Time Accumulation Enable bit
When TCS = 1:
This bit is ignored.
When TCS = 0:
1 = Gated time accumulation enabled
0 = Gated time accumulation disabled
bit 5-4 TCKPS<1:0>: Timer2 Input Clock Prescale Select bits
11 = 1:256
10 = 1:64
01 = 1:8
00 = 1:1
bit 3 T32: 32-bit Timer Mode Select bit(1)
1 = Timer2 and Timer3 form a single 32-bit timer
0 = Timer2 and Timer3 act as two 16-bit timers
bit 2 Unimplemented: Read as ‘0’
bit 1 TCS: Timer2 Clock Source Select bit
1 = External clock from pin T2CK (on the rising edge)
0 = Internal clock (FCY)
bit 0 Unimplemented: Read as ‘0’

Note 1: In 32-bit mode, T3CON control bits do not affect 32-bit timer operation.

DS70290B-page 138 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 11-2: T3CON CONTROL REGISTER

R/W-0 U-0 R/W-0 U-0 U-0 U-0 U-0 U-0
TON(1) — TSIDL(1) — — — — —
bit 15 bit 8

U-0 R/W-0 R/W-0 R/W-0 U-0 U-0 R/W-0 U-0

— TGATE(1) TCKPS<1:0>(1) — — TCS(1) —
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15 TON: Timer3 On bit(1)

1 = Starts 16-bit Timer3
0 = Stops 16-bit Timer3
bit 14 Unimplemented: Read as ‘0’
bit 13 TSIDL: Stop in Idle Mode bit(1)
1 = Discontinue module operation when device enters Idle mode
0 = Continue module operation in Idle mode
bit 12-7 Unimplemented: Read as ‘0’
bit 6 TGATE: Timer3 Gated Time Accumulation Enable bit(1)
When TCS = 1:
This bit is ignored.
When TCS = 0:
1 = Gated time accumulation enabled
0 = Gated time accumulation disabled
bit 5-4 TCKPS<1:0>: Timer3 Input Clock Prescale Select bits(1)
11 = 1:256
10 = 1:64
01 = 1:8
00 = 1:1
bit 3-2 Unimplemented: Read as ‘0’
bit 1 TCS: Timer3 Clock Source Select bit(1)
1 = External clock from pin T3CK (on the rising edge)
0 = Internal clock (FCY)
bit 0 Unimplemented: Read as ‘0’

Note 1: When 32-bit operation is enabled (T2CON<3> = 1), these bits have no effect on Timer3 operation; all timer
functions are set through T2CON.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 139

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

NOTES:

DS70290B-page 140 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

12.0 INPUT CAPTURE - Capture timer value on every rising edge of

input at ICx pin
Note: This data sheet summarizes the features • Capture timer value on every edge (rising and
of the dsPIC33FJ32GP202/204 and falling).
dsPIC33FJ16GP304 family of devices. It • Prescaler Capture Event modes:
is not intended to be a comprehensive
- Capture timer value on every 4th rising edge
reference source. To complement the
of input at ICx pin
information in this data sheet, refer to the
dsPIC33F Family Reference Manual, -Capture timer value on every 16th rising
“Section 12. Input Capture” (DS70198), edge of input at ICx pin
which is available from the Microchip Each input capture channel can select one of two
website (www.microchip.com). 16-bit timers (Timer2 or Timer3) for the time base.
The selected timer can use either an internal or
The input capture module is useful in applications
external clock.
requiring frequency (period) and pulse measurement.
The dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 Other operational features include:
devices support up to eight input capture channels. • Device wake-up from capture pin during CPU
The input capture module captures the 16-bit value of Sleep and Idle modes
the selected Time Base register when an event occurs • Interrupt on input capture event
at the ICx pin. The events that cause a capture event • 4-word FIFO buffer for capture values
are listed below in three categories:
- Interrupt optionally generated after 1, 2, 3 or
• Simple Capture Event modes: 4 buffer locations are filled
- Capture timer value on every falling edge of • Use of input capture to provide additional sources
input at ICx pin of external interrupts

FIGURE 12-1: INPUT CAPTURE BLOCK DIAGRAM

From 16-bit Timers
TMR2 TMR3

16 16

ICTMR
1 0
(ICxCON<7>)
Prescaler Edge Detection Logic FIFO
Counter and R/W
(1, 4, 16) Clock Synchronizer Logic
ICx Pin
ICM<2:0> (ICxCON<2:0>)
3 Mode Select

FIFO
ICOV, ICBNE (ICxCON<4:3>)
ICxBUF
ICxI<1:0>
Interrupt
ICxCON Logic

System Bus
Set Flag ICxIF
(in IFSn Register)

Note: An ‘x’ in a signal, register or bit name denotes the number of the capture channel.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 141

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

12.1 Input Capture Registers

REGISTER 12-1: ICxCON: INPUT CAPTURE x CONTROL REGISTER
U-0 U-0 R/W-0 U-0 U-0 U-0 U-0 U-0
— — ICSIDL — — — — —
bit 15 bit 8

R/W-0 R/W-0 R/W-0 R-0, HC R-0, HC R/W-0 R/W-0 R/W-0

ICTMR ICI<1:0> ICOV ICBNE ICM<2:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-14 Unimplemented: Read as ‘0’

bit 13 ICSIDL: Input Capture Module Stop in Idle Control bit
1 = Input capture module will halt in CPU Idle mode
0 = Input capture module will continue to operate in CPU Idle mode
bit 12-8 Unimplemented: Read as ‘0’
bit 7 ICTMR: Input Capture Timer Select bits
1 = TMR2 contents are captured on capture event
0 = TMR3 contents are captured on capture event
bit 6-5 ICI<1:0>: Select Number of Captures per Interrupt bits
11 = Interrupt on every fourth capture event
10 = Interrupt on every third capture event
01 = Interrupt on every second capture event
00 = Interrupt on every capture event
bit 4 ICOV: Input Capture Overflow Status Flag bit (read-only)
1 = Input capture overflow occurred
0 = No input capture overflow occurred
bit 3 ICBNE: Input Capture Buffer Empty Status bit (read-only)
1 = Input capture buffer is not empty, at least one more capture value can be read
0 = Input capture buffer is empty
bit 2-0 ICM<2:0>: Input Capture Mode Select bits
111 = Input capture functions as interrupt pin only when device is in Sleep or Idle mode
(Rising edge detect only, all other control bits are not applicable.)
110 = Unused (module disabled)
101 = Capture mode, every 16th rising edge
100 = Capture mode, every 4th rising edge
011 = Capture mode, every rising edge
010 = Capture mode, every falling edge
001 = Capture mode, every edge (rising and falling)
(ICI<1:0> bits do not control interrupt generation for this mode.)
000 = Input capture module turned off

DS70290B-page 142 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
13.0 OUTPUT COMPARE value matches the compare register value. The Output
Compare module generates either a single output
Note: This data sheet summarizes the features pulse or a sequence of output pulses, by changing the
of the dsPIC33FJ32GP202/204 and state of the output pin on the compare match events.
dsPIC33FJ16GP304 family of devices. It The Output Compare module can also generate
is not intended to be a comprehensive interrupts on compare match events.
reference source. To complement the
information in this data sheet, refer to the The Output Compare module has multiple operating
dsPIC33F Family Reference Manual, modes:
Section 13. “Output Compare” • Active-Low One-Shot mode
(DS70209), which is available on the
• Active-High One-Shot mode
Microchip website (www.microchip.com).
• Toggle mode
The Output Compare module can select either Timer2 • Delayed One-Shot mode
or Timer3 for its time base. The module compares the • Continuous Pulse mode
value of the timer with the value of one or two compare • PWM mode without fault protection
registers depending on the operating mode selected.
• PWM mode with fault protection
The state of the output pin changes when the timer

FIGURE 13-1: OUTPUT COMPARE MODULE BLOCK DIAGRAM

Set Flag bit

OCxIF

OCxRS

OCxR Output S Q
OCx
Logic R

3 Output Enable

OCM<2:0>
Mode Select OCFA
Comparator

0 1 OCTSEL 0 1

16 16

TMR2 TMR3 TMR2 TMR3

Rollover Rollover

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 143

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

13.1 Output Compare Modes Compare modes. Figure 13-2 illustrates the output
compare operation for various modes. The user
Configure the Output Compare modes by setting the application must disable the associated timer when
appropriate Output Compare Mode (OCM<2:0>) bits in writing to the output compare control registers to avoid
the Output Compare Control (OCxCON<2:0>) register. malfunctions.
Table 13-1 lists the different bit settings for the Output

TABLE 13-1: OUTPUT COMPARE MODES

OCM<2:0> Mode OCx Pin Initial State OCx Interrupt Generation
000 Module Disabled Controlled by GPIO register —
001 Active-Low One-Shot 0 OCx Rising edge
010 Active-High One-Shot 1 OCx Falling edge
011 Toggle Mode Current output is maintained OCx Rising and Falling edge
100 Delayed One-Shot 0 OCx Falling edge
101 Continuous Pulse mode 0 OCx Falling edge
110 PWM mode without fault 0, if OCxR is zero No interrupt
protection 1, if OCxR is non-zero
111 PWM mode with fault protection 0, if OCxR is zero OCFA Falling edge for OC1 to OC4
1, if OCxR is non-zero

FIGURE 13-2: OUTPUT COMPARE OPERATION

Output Compare Timer is reset on
Mode enabled period match

OCxRS

TMRy
OCxR

Active-Low One-Shot
(OCM = 001)

Active-High One-Shot
(OCM = 010)

Toggle Mode
(OCM = 011)

Delayed One-Shot
(OCM = 100)

Continuous Pulse Mode

(OCM = 101)

PWM Mode
(OCM = 110 or 111)

DS70290B-page 144 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

13.2 Output Compare Register

REGISTER 13-1: OCxCON: OUTPUT COMPARE x CONTROL REGISTER

U-0 U-0 R/W-0 U-0 U-0 U-0 U-0 U-0
— — OCSIDL — — — — —
bit 15 bit 8

U-0 U-0 U-0 R-0 HC R/W-0 R/W-0 R/W-0 R/W-0

— — — OCFLT OCTSEL OCM<2:0>
bit 7 bit 0

Legend: HC = Cleared in Hardware HS = Set in Hardware

R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-14 Unimplemented: Read as ‘0’

bit 13 OCSIDL: Stop Output Compare in Idle Mode Control bit
1 = Output Compare x will halt in CPU Idle mode
0 = Output Compare x will continue to operate in CPU Idle mode
bit 12-5 Unimplemented: Read as ‘0’
bit 4 OCFLT: PWM Fault Condition Status bit
1 = PWM Fault condition has occurred (cleared in hardware only)
0 = No PWM Fault condition has occurred
(This bit is only used when OCM<2:0> = 111.)
bit 3 OCTSEL: Output Compare Timer Select bit
1 = Timer3 is the clock source for Compare x
0 = Timer2 is the clock source for Compare x
bit 2-0 OCM<2:0>: Output Compare Mode Select bits
111 = PWM mode on OCx, Fault pin enabled
110 = PWM mode on OCx, Fault pin disabled
101 = Initialize OCx pin low, generate continuous output pulses on OCx pin
100 = Initialize OCx pin low, generate single output pulse on OCx pin
011 = Compare event toggles OCx pin
010 = Initialize OCx pin high, compare event forces OCx pin low
001 = Initialize OCx pin low, compare event forces OCx pin high
000 = Output compare channel is disabled

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 145

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

NOTES:

DS70290B-page 146 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

14.0 SERIAL PERIPHERAL Each SPI module consists of a 16-bit shift register,
SPIxSR (where x = 1 or 2), used for shifting data in and
INTERFACE (SPI) out, and a buffer register, SPIxBUF. A control register,
Note: This data sheet summarizes the features SPIxCON, configures the module. Additionally, a status
of the dsPIC33FJ32GP202/204 and register, SPIxSTAT, indicates status conditions.
dsPIC33FJ16GP304 family of devices. It The serial interface consists of 4 pins:
is not intended to be a comprehensive
• SDIx (serial data input)
reference source. To complement the
• SDOx (serial data output)
information in this data sheet, refer to the
• SCKx (shift clock input or output)
dsPIC33F Family Reference Manual,
• SSx (active-low slave select)
“Section 18. Serial Peripheral Interface
(SPI)” (DS70206), which is available on In Master mode operation, SCK is a clock output. In
the Microchip website Slave mode, it is a clock input.
(www.microchip.com).
The Serial Peripheral Interface (SPI) module is a
synchronous serial interface useful for communicating
with other peripheral or microcontroller devices. These
peripheral devices can be serial EEPROMs, shift
registers, display drivers, analog-to-digital (A/D)
converters, etc. The SPI module is compatible with SPI
and SIOP from Motorola®.

FIGURE 14-1: SPI MODULE BLOCK DIAGRAM

SCKx 1:1 to 1:8 1:1/4/16/64

Secondary Primary FCY
Prescaler Prescaler
SSx
Sync Control Select
Control Clock Edge SPIxCON1<1:0>
Shift Control
SPIxCON1<4:2>
SDOx
Enable
SDIx bit 0 Master Clock
SPIxSR

Transfer Transfer

SPIxRXB SPIxTXB

SPIxBUF

Read SPIxBUF Write SPIxBUF

16
Internal Data Bus

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 147

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 14-1: SPIxSTAT: SPIx STATUS AND CONTROL REGISTER

R/W-0 U-0 R/W-0 U-0 U-0 U-0 U-0 U-0
SPIEN — SPISIDL — — — — —
bit 15 bit 8

U-0 R/C-0 U-0 U-0 U-0 U-0 R-0 R-0

— SPIROV — — — — SPITBF SPIRBF
bit 7 bit 0

Legend: C = Clearable bit

R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15 SPIEN: SPIx Enable bit

1 = Enables module and configures SCKx, SDOx, SDIx and SSx as serial port pins
0 = Disables module
bit 14 Unimplemented: Read as ‘0’
bit 13 SPISIDL: Stop in Idle Mode bit
1 = Discontinue module operation when device enters Idle mode
0 = Continue module operation in Idle mode
bit 12-7 Unimplemented: Read as ‘0’
bit 6 SPIROV: Receive Overflow Flag bit
1 = A new byte/word is completely received and discarded. The user software has not read the
previous data in the SPIxBUF register
0 = No overflow has occurred.
bit 5-2 Unimplemented: Read as ‘0’
bit 1 SPITBF: SPIx Transmit Buffer Full Status bit
1 = Transmit not yet started, SPIxTXB is full
0 = Transmit started, SPIxTXB is empty
Automatically set in hardware when CPU writes SPIxBUF location, loading SPIxTXB.
Automatically cleared in hardware when SPIx module transfers data from SPIxTXB to SPIxSR.
bit 0 SPIRBF: SPIx Receive Buffer Full Status bit
1 = Receive complete, SPIxRXB is full
0 = Receive is not complete, SPIxRXB is empty
Automatically set in hardware when SPIx transfers data from SPIxSR to SPIxRXB.
Automatically cleared in hardware when core reads SPIxBUF location, reading SPIxRXB.

DS70290B-page 148 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 14-2: SPIXCON1: SPIx CONTROL REGISTER 1

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
— — — DISSCK DISSDO MODE16 SMP CKE(1)
bit 15 bit 8

R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

SSEN CKP MSTEN SPRE<2:0> PPRE<1:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-13 Unimplemented: Read as ‘0’

bit 12 DISSCK: Disable SCKx pin bit (SPI Master modes only)
1 = Internal SPI clock is disabled, pin functions as I/O
0 = Internal SPI clock is enabled
bit 11 DISSDO: Disable SDOx pin bit
1 = SDOx pin is not used by module; pin functions as I/O
0 = SDOx pin is controlled by the module
bit 10 MODE16: Word/Byte Communication Select bit
1 = Communication is word-wide (16 bits)
0 = Communication is byte-wide (8 bits)
bit 9 SMP: SPIx Data Input Sample Phase bit
Master mode:
1 = Input data sampled at end of data output time
0 = Input data sampled at middle of data output time
Slave mode:
SMP must be cleared when SPIx is used in Slave mode.
bit 8 CKE: SPIx Clock Edge Select bit(1)
1 = Serial output data changes on transition from active clock state to Idle clock state (see bit 6)
0 = Serial output data changes on transition from Idle clock state to active clock state (see bit 6)
bit 7 SSEN: Slave Select Enable bit (Slave mode)
1 = SSx pin used for Slave mode
0 = SSx pin not used by module. Pin controlled by port function
bit 6 CKP: Clock Polarity Select bit
1 = Idle state for clock is a high level; active state is a low level
0 = Idle state for clock is a low level; active state is a high level
bit 5 MSTEN: Master Mode Enable bit
1 = Master mode
0 = Slave mode

Note 1: The CKE bit is not used in the Framed SPI modes. Program this bit to ‘0’ for the Framed SPI modes
(FRMEN = 1).

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 149

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 14-2: SPIXCON1: SPIx CONTROL REGISTER 1 (CONTINUED)

bit 4-2 SPRE<2:0>: Secondary Prescale bits (Master mode)
111 = Secondary prescale 1:1
110 = Secondary prescale 2:1
•
•
•
000 = Secondary prescale 8:1
bit 1-0 PPRE<1:0>: Primary Prescale bits (Master mode)
11 = Primary prescale 1:1
10 = Primary prescale 4:1
01 = Primary prescale 16:1
00 = Primary prescale 64:1

Note 1: The CKE bit is not used in the Framed SPI modes. Program this bit to ‘0’ for the Framed SPI modes
(FRMEN = 1).

DS70290B-page 150 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 14-3: SPIxCON2: SPIx CONTROL REGISTER 2

R/W-0 R/W-0 R/W-0 U-0 U-0 U-0 U-0 U-0
FRMEN SPIFSD FRMPOL — — — — —
bit 15 bit 8

U-0 U-0 U-0 U-0 U-0 U-0 R/W-0 U-0

— — — — — — FRMDLY —
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15 FRMEN: Framed SPIx Support bit

1 = Framed SPIx support enabled (SSx pin used as frame sync pulse input/output)
0 = Framed SPIx support disabled
bit 14 SPIFSD: Frame Sync Pulse Direction Control bit
1 = Frame sync pulse input (slave)
0 = Frame sync pulse output (master)
bit 13 FRMPOL: Frame Sync Pulse Polarity bit
1 = Frame sync pulse is active-high
0 = Frame sync pulse is active-low
bit 12-2 Unimplemented: Read as ‘0’
bit 1 FRMDLY: Frame Sync Pulse Edge Select bit
1 = Frame sync pulse coincides with first bit clock
0 = Frame sync pulse precedes first bit clock
bit 0 Unimplemented: This bit must not be set to ‘1’ by the user application

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 151

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

NOTES:

DS70290B-page 152 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

15.0 INTER-INTEGRATED CIRCUIT 15.1 Operating Modes

(I2C™) The hardware fully implements all the master and slave
functions of the I2C Standard and Fast mode
Note: This data sheet summarizes the features
specifications, as well as 7 and 10-bit addressing.
of the dsPIC33FJ32GP202/204 and
dsPIC33FJ16GP304 family of devices. It The I2C module can operate either as a slave or a
is not intended to be a comprehensive master on an I2C bus.
reference source. To complement the The following types of I2C operation are supported:
information in this data sheet, refer to the
• I2C slave operation with 7-bit address
dsPIC33F Family Reference Manual,
“Section 19. Inter-Integrated Circuit • I2C slave operation with 10-bit address
(I2C™)” (DS70195), which is available on • I2C master operation with 7- or 10-bit address
the Microchip website For details about the communication sequence in each
(www.microchip.com). of these modes, refer to the “dsPIC33F Family
The Inter-Integrated Circuit (I2C) module provides Reference Manual”.
complete hardware support for both Slave and
Multi-Master modes of the I2C serial communication 15.2 I2C Registers
standard, with a 16-bit interface.
I2CxCON and I2CxSTAT are control and status
The I2C module has a 2-pin interface: registers, respectively. The I2CxCON register is
• The SCLx pin is clock readable and writable. The lower six bits of I2CxSTAT
• The SDAx pin is data are read-only. The remaining bits of the I2CSTAT are
read/write.
The I2C module offers the following key features:
• I2CxRSR is the shift register used for shifting
• I2C interface supporting both Master and Slave
data.
modes of operation.
• I2CxRCV is the receive buffer and the register to
• I2C Slave mode supports 7-bit and 10-bit address.
which data bytes are written, or from which data
• I2C Master mode supports 7-bit and 10-bit address. bytes are read.
• I2C port allows bidirectional transfers between • I2CxTRN is the transmit register to which bytes
master and slaves. are written during a transmit operation.
• Serial clock synchronization for I2C port can be • The I2CxADD register holds the slave address.
used as a handshake mechanism to suspend and
• A status bit, ADD10, indicates 10-bit Address
resume serial transfer (SCLREL control).
mode.
• I2C supports multi-master operation, detects bus
• I2CxBRG acts as the Baud Rate Generator
collision and arbitrates accordingly.
(BRG) reload value.
In receive operations, I2CxRSR and I2CxRCV together
form a double-buffered receiver. When I2CxRSR
receives a complete byte, it is transferred to I2CxRCV,
and an interrupt pulse is generated.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 153

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

FIGURE 15-1: I2C™ BLOCK DIAGRAM (X = 1)

Internal
Data Bus

I2CxRCV
Read

Shift
SCLx Clock
I2CxRSR
LSb

SDAx Address Match

Match Detect Write

I2CxMSK

Write Read

I2CxADD

Read

Start and Stop

Bit Detect
Write

Start and Stop

Bit Generation I2CxSTAT
Control Logic

Read
Collision Write
Detect

I2CxCON
Acknowledge
Generation Read

Clock
Stretching
Write

I2CxTRN
LSb
Shift Clock Read

Reload
Control
Write

BRG Down Counter I2CxBRG

Read
TCY/2

DS70290B-page 154 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 15-1: I2CxCON: I2Cx CONTROL REGISTER

R/W-0 U-0 R/W-0 R/W-1 HC R/W-0 R/W-0 R/W-0 R/W-0
I2CEN — I2CSIDL SCLREL IPMIEN A10M DISSLW SMEN
bit 15 bit 8

R/W-0 R/W-0 R/W-0 R/W-0 HC R/W-0 HC R/W-0 HC R/W-0 HC R/W-0 HC

GCEN STREN ACKDT ACKEN RCEN PEN RSEN SEN
bit 7 bit 0

Legend: U = Unimplemented bit, read as ‘0’

R = Readable bit W = Writable bit HS = Set in hardware HC = Cleared in hardware
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15 I2CEN: I2Cx Enable bit

1 = Enables the I2Cx module and configures the SDAx and SCLx pins as serial port pins
0 = Disables the I2Cx module. All I2C pins are controlled by port functions
bit 14 Unimplemented: Read as ‘0’
bit 13 I2CSIDL: Stop in Idle Mode bit
1 = Discontinue module operation when device enters an Idle mode
0 = Continue module operation in Idle mode
bit 12 SCLREL: SCLx Release Control bit (when operating as I2C™ slave)
1 = Release SCLx clock
0 = Hold SCLx clock low (clock stretch)
If STREN = 1:
Bit is R/W (i.e., software can write ‘0’ to initiate stretch and write ‘1’ to release clock). Hardware clear
at beginning of slave transmission. Hardware clear at end of slave reception.
If STREN = 0:
Bit is R/S (i.e., software can only write ‘1’ to release clock). Hardware clear at beginning of slave
transmission.
bit 11 IPMIEN: Intelligent Peripheral Management Interface (IPMI) Enable bit
1 = IPMI mode is enabled; all addresses Acknowledged
0 = IPMI mode disabled
bit 10 A10M: 10-bit Slave Address bit
1 = I2CxADD is a 10-bit slave address
0 = I2CxADD is a 7-bit slave address
bit 9 DISSLW: Disable Slew Rate Control bit
1 = Slew rate control disabled
0 = Slew rate control enabled
bit 8 SMEN: SMBus Input Levels bit
1 = Enable I/O pin thresholds compliant with SMBus specification
0 = Disable SMBus input thresholds
bit 7 GCEN: General Call Enable bit (when operating as I2C slave)
1 = Enable interrupt when a general call address is received in the I2CxRSR
(module is enabled for reception)
0 = General call address disabled
bit 6 STREN: SCLx Clock Stretch Enable bit (when operating as I2C slave)
Used in conjunction with SCLREL bit.
1 = Enable software or receive clock stretching
0 = Disable software or receive clock stretching

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 155

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 15-1: I2CxCON: I2Cx CONTROL REGISTER (CONTINUED)

bit 5 ACKDT: Acknowledge Data bit (when operating as I2C master, applicable during master receive)
Value that will be transmitted when the software initiates an Acknowledge sequence.
1 = Send NACK during Acknowledge
0 = Send ACK during Acknowledge
bit 4 ACKEN: Acknowledge Sequence Enable bit
(when operating as I2C master, applicable during master receive)
1 = Initiate Acknowledge sequence on SDAx and SCLx pins and transmit ACKDT data bit.
Hardware clear at end of master Acknowledge sequence
0 = Acknowledge sequence not in progress
bit 3 RCEN: Receive Enable bit (when operating as I2C master)
1 = Enables Receive mode for I2C. Hardware clear at end of eighth bit of master receive data byte
0 = Receive sequence not in progress
bit 2 PEN: Stop Condition Enable bit (when operating as I2C master)
1 = Initiate Stop condition on SDAx and SCLx pins. Hardware clear at end of master Stop sequence
0 = Stop condition not in progress
bit 1 RSEN: Repeated Start Condition Enable bit (when operating as I2C master)
1 = Initiate Repeated Start condition on SDAx and SCLx pins. Hardware clear at end of
master Repeated Start sequence
0 = Repeated Start condition not in progress
bit 0 SEN: Start Condition Enable bit (when operating as I2C master)
1 = Initiate Start condition on SDAx and SCLx pins. Hardware clear at end of master Start sequence
0 = Start condition not in progress

DS70290B-page 156 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 15-2: I2CxSTAT: I2Cx STATUS REGISTER

R-0 HSC R-0 HSC U-0 U-0 U-0 R/C-0 HS R-0 HSC R-0 HSC
ACKSTAT TRSTAT — — — BCL GCSTAT ADD10
bit 15 bit 8

R/C-0 HS R/C-0 HS R-0 HSC R/C-0 HSC R/C-0 HSC R-0 HSC R-0 HSC R-0 HSC
IWCOL I2COV D_A P S R_W RBF TBF
bit 7 bit 0

Legend: U = Unimplemented bit, read as ‘0’

R = Readable bit W = Writable bit HS = Set in hardware HSC = Hardware set/cleared
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15 ACKSTAT: Acknowledge Status bit

(when operating as I2C master, applicable to master transmit operation)
1 = NACK received from slave
0 = ACK received from slave
Hardware set or clear at end of slave Acknowledge.
bit 14 TRSTAT: Transmit Status bit (when operating as I2C master, applicable to master transmit operation)
1 = Master transmit is in progress (8 bits + ACK)
0 = Master transmit is not in progress
Hardware set at beginning of master transmission. Hardware clear at end of slave Acknowledge.
bit 13-11 Unimplemented: Read as ‘0’
bit 10 BCL: Master Bus Collision Detect bit
1 = A bus collision has been detected during a master operation
0 = No collision
Hardware set at detection of bus collision.
bit 9 GCSTAT: General Call Status bit
1 = General call address was received
0 = General call address was not received
Hardware set when address matches general call address. Hardware clear at Stop detection.
bit 8 ADD10: 10-bit Address Status bit
1 = 10-bit address was matched
0 = 10-bit address was not matched
Hardware set at match of 2nd byte of matched 10-bit address. Hardware clear at Stop detection.
bit 7 IWCOL: Write Collision Detect bit
1 = An attempt to write the I2CxTRN register failed because the I2C module is busy
0 = No collision
Hardware set at occurrence of write to I2CxTRN while busy (cleared by software).
bit 6 I2COV: Receive Overflow Flag bit
1 = A byte was received while the I2CxRCV register is still holding the previous byte
0 = No overflow
Hardware set at attempt to transfer I2CxRSR to I2CxRCV (cleared by software).
bit 5 D_A: Data/Address bit (when operating as I2C slave)
1 = Indicates that the last byte received was data
0 = Indicates that the last byte received was device address
Hardware clear at device address match. Hardware set by reception of slave byte.
bit 4 P: Stop bit
1 = Indicates that a Stop bit has been detected last
0 = Stop bit was not detected last
Hardware set or clear when Start, Repeated Start or Stop detected.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 157

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 15-2: I2CxSTAT: I2Cx STATUS REGISTER (CONTINUED)

bit 3 S: Start bit
1 = Indicates that a Start (or Repeated Start) bit has been detected last
0 = Start bit was not detected last
Hardware set or clear when Start, Repeated Start or Stop detected.
bit 2 R_W: Read/Write Information bit (when operating as I2C slave)
1 = Read – indicates data transfer is output from slave
0 = Write – indicates data transfer is input to slave
Hardware set or clear after reception of I 2C device address byte.
bit 1 RBF: Receive Buffer Full Status bit
1 = Receive complete, I2CxRCV is full
0 = Receive not complete, I2CxRCV is empty
Hardware set when I2CxRCV is written with received byte. Hardware clear when software
reads I2CxRCV.
bit 0 TBF: Transmit Buffer Full Status bit
1 = Transmit in progress, I2CxTRN is full
0 = Transmit complete, I2CxTRN is empty
Hardware set when software writes I2CxTRN. Hardware clear at completion of data transmission.

DS70290B-page 158 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 15-3: I2CxMSK: I2Cx SLAVE MODE ADDRESS MASK REGISTER

U-0 U-0 U-0 U-0 U-0 U-0 R/W-0 R/W-0
— — — — — — AMSK9 AMSK8
bit 15 bit 8

R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

AMSK7 AMSK6 AMSK5 AMSK4 AMSK3 AMSK2 AMSK1 AMSK0
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-10 Unimplemented: Read as ‘0’

bit 9-0 AMSKx: Mask for Address bit x Select bit
1 = Enable masking for bit x of incoming message address; bit match not required in this position
0 = Disable masking for bit x; bit match required in this position

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 159

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

NOTES:

DS70290B-page 160 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

16.0 UNIVERSAL ASYNCHRONOUS • Hardware Flow Control Option with UxCTS and
UxRTS pins
RECEIVER TRANSMITTER
• Fully Integrated Baud Rate Generator with 16-bit
(UART) prescaler
Note: This data sheet summarizes the features • Baud rates ranging from 1 Mbps to 15 bps at 16x
of the dsPIC33FJ32GP202/204 and mode at 40 MIPS
dsPIC33FJ16GP304 family of devices. It • Baud rates ranging from 4 Mbps to 61 bps at 4x
is not intended to be a comprehensive mode at 40 MIPS
reference source. To complement the • 4-deep first-in-first-out (FIFO) Transmit Data Buf-
information in this data sheet, refer to the fer
dsPIC33F Family Reference Manual, • 4-Deep FIFO Receive Data Buffer
“Section 17. UART” (DS70188), which is
• Parity, framing and buffer overrun error detection
available on the Microchip website
(www.microchip.com). • Support for 9-bit mode with Address Detect
(9th bit = 1)
The Universal Asynchronous Receiver Transmitter • Transmit and Receive interrupts
(UART) module is one of the serial I/O modules
• A separate interrupt for all UART error conditions
available in the dsPIC33FJ32GP202/204 and
dsPIC33FJ16GP304 device family. The UART is a • Loopback mode for diagnostic support
full-duplex asynchronous system that can • Support for Sync and Break characters
communicate with peripheral devices, such as • Support for automatic baud rate detection
personal computers, LIN, RS-232 and RS-485 • IrDA encoder and decoder logic
interfaces. The module also supports a hardware flow • 16x baud clock output for IrDA support
control option with the UxCTS and UxRTS pins and
also includes an IrDA® encoder and decoder. A simplified block diagram of the UART module is
shown in Figure 16-1. The UART module consists of
The primary features of the UART module are: these key hardware elements:
• Full-Duplex, 8- or 9-bit Data Transmission through • Baud Rate Generator
the UxTX and UxRX pins
• Asynchronous Transmitter
• Even, odd or no parity options (for 8-bit data)
• Asynchronous Receiver
• One or two stop bits

FIGURE 16-1: UART SIMPLIFIED BLOCK DIAGRAM

Baud Rate Generator

IrDA® BCLK

Hardware Flow Control UxRTS

UxCTS

UART Receiver UxRX

UART Transmitter UxTX

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 161

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 16-1: UxMODE: UARTx MODE REGISTER

R/W-0 U-0 R/W-0 R/W-0 R/W-0 U-0 R/W-0 R/W-0
UARTEN — USIDL IREN(1) RTSMD — UEN<1:0>
bit 15 bit 8

R/W-0 HC R/W-0 R/W-0 HC R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

WAKE LPBACK ABAUD URXINV BRGH PDSEL<1:0> STSEL
bit 7 bit 0

Legend: HC = Hardware cleared

R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15 UARTEN: UARTx Enable bit

1 = UARTx is enabled; all UARTx pins are controlled by UARTx as defined by UEN<1:0>
0 = UARTx is disabled; all UARTx pins are controlled by port latches; UARTx power consumption
minimal
bit 14 Unimplemented: Read as ‘0’
bit 13 USIDL: Stop in Idle Mode bit
1 = Discontinue module operation when device enters Idle mode
0 = Continue module operation in Idle mode
bit 12 IREN: IrDA Encoder and Decoder Enable bit(1)
1 = IrDA encoder and decoder enabled
0 = IrDA encoder and decoder disabled
bit 11 RTSMD: Mode Selection for UxRTS Pin bit
1 = UxRTS pin in Simplex mode
0 = UxRTS pin in Flow Control mode
bit 10 Unimplemented: Read as ‘0’
bit 9-8 UEN<1:0>: UARTx Enable bits
11 = UxTX, UxRX and BCLK pins are enabled and used; UxCTS pin controlled by port latches
10 = UxTX, UxRX, UxCTS and UxRTS pins are enabled and used
01 = UxTX, UxRX and UxRTS pins are enabled and used; UxCTS pin controlled by port latches
00 = UxTX and UxRX pins are enabled and used; UxCTS and UxRTS/BCLK pins controlled by
port latches
bit 7 WAKE: Wake-up on Start bit Detect During Sleep Mode Enable bit
1 = UARTx will continue to sample the UxRX pin; interrupt generated on falling edge; bit cleared
in hardware on following rising edge
0 = No wake-up enabled
bit 6 LPBACK: UARTx Loopback Mode Select bit
1 = Enable Loopback mode
0 = Loopback mode is disabled
bit 5 ABAUD: Auto-Baud Enable bit
1 = Enable baud rate measurement on the next character – requires reception of a Sync field (55h)
before other data; cleared in hardware upon completion
0 = Baud rate measurement disabled or completed
bit 4 URXINV: Receive Polarity Inversion bit
1 = UxRX Idle state is ‘0’
0 = UxRX Idle state is ‘1’

Note 1: This feature is only available for the 16x BRG mode (BRGH = 0).

DS70290B-page 162 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 16-1: UxMODE: UARTx MODE REGISTER (CONTINUED)

bit 3 BRGH: High Baud Rate Enable bit
1 = BRG generates 4 clocks per bit period (4x baud clock, High-Speed mode)
0 = BRG generates 16 clocks per bit period (16x baud clock, Standard mode)
bit 2-1 PDSEL<1:0>: Parity and Data Selection bits
11 = 9-bit data, no parity
10 = 8-bit data, odd parity
01 = 8-bit data, even parity
00 = 8-bit data, no parity
bit 0 STSEL: Stop Bit Selection bit
1 = Two Stop bits
0 = One Stop bit

Note 1: This feature is only available for the 16x BRG mode (BRGH = 0).

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 163

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 16-2: UxSTA: UARTx STATUS AND CONTROL REGISTER

R/W-0 R/W-0 R/W-0 U-0 R/W-0 HC R/W-0 R-0 R-1
UTXISEL1 UTXINV UTXISEL0 — UTXBRK UTXEN UTXBF TRMT
bit 15 bit 8

R/W-0 R/W-0 R/W-0 R-1 R-0 R-0 R/C-0 R-0

URXISEL<1:0> ADDEN RIDLE PERR FERR OERR URXDA
bit 7 bit 0

Legend: HC = Hardware cleared

R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15,13 UTXISEL<1:0>: Transmission Interrupt Mode Selection bits

11 = Reserved; do not use
10 = Interrupt when a character is transferred to the Transmit Shift Register, and as a result, the
transmit buffer becomes empty
01 = Interrupt when the last character is shifted out of the Transmit Shift Register; all transmit
operations are completed
00 = Interrupt when a character is transferred to the Transmit Shift Register (this implies there is
at least one character open in the transmit buffer)
bit 14 UTXINV: Transmit Polarity Inversion bit
1 = UxTX Idle state is ‘1’
0 = UxTX Idle state is ‘0’
bit 12 Unimplemented: Read as ‘0’
bit 11 UTXBRK: Transmit Break bit
1 = Send Sync Break on next transmission – Start bit, followed by twelve ‘0’ bits, followed by Stop bit;
cleared by hardware upon completion
0 = Sync Break transmission disabled or completed
bit 10 UTXEN: Transmit Enable bit
1 = Transmit enabled, UxTX pin controlled by UARTx
0 = Transmit disabled, any pending transmission is aborted and buffer is reset. UxTX pin controlled
by port
bit 9 UTXBF: Transmit Buffer Full Status bit (read-only)
1 = Transmit buffer is full
0 = Transmit buffer is not full, at least one more character can be written
bit 8 TRMT: Transmit Shift Register Empty bit (read-only)
1 = Transmit Shift Register is empty and transmit buffer is empty (the last transmission has completed)
0 = Transmit Shift Register is not empty, a transmission is in progress or queued
bit 7-6 URXISEL<1:0>: Receive Interrupt Mode Selection bits
11 = Interrupt is set on UxRSR transfer making the receive buffer full (i.e., has 4 data characters)
10 = Interrupt is set on UxRSR transfer making the receive buffer 3/4 full (i.e., has 3 data characters)
0x = Interrupt is set when any character is received and transferred from the UxRSR to the receive
buffer. Receive buffer has one or more characters
bit 5 ADDEN: Address Character Detect bit (bit 8 of received data = 1)
1 = Address Detect mode enabled. If 9-bit mode is not selected, this does not take effect
0 = Address Detect mode disabled
bit 4 RIDLE: Receiver Idle bit (read-only)
1 = Receiver is Idle
0 = Receiver is active

DS70290B-page 164 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 16-2: UxSTA: UARTx STATUS AND CONTROL REGISTER (CONTINUED)

bit 3 PERR: Parity Error Status bit (read-only)
1 = Parity error has been detected for the current character (character at the top of the receive FIFO)
0 = Parity error has not been detected
bit 2 FERR: Framing Error Status bit (read-only)
1 = Framing error has been detected for the current character (character at the top of the receive
FIFO)
0 = Framing error has not been detected
bit 1 OERR: Receive Buffer Overrun Error Status bit (read/clear only)
1 = Receive buffer has overflowed
0 = Receive buffer has not overflowed. Clearing a previously set OERR bit (1 → 0 transition) will reset
the receiver buffer and the UxRSR to the empty state
bit 0 URXDA: Receive Buffer Data Available bit (read-only)
1 = Receive buffer has data, at least one more character can be read
0 = Receive buffer is empty

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 165

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

NOTES:

DS70290B-page 166 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

17.0 10-BIT/12-BIT Depending on the particular device pinout, the ADC

can have up to 13 analog input pins, designated AN0
ANALOG-TO-DIGITAL
through AN12. In addition, there are two analog input
CONVERTER (ADC) pins for external voltage reference connections. These
voltage reference inputs can be shared with other
Note: This data sheet summarizes the features
analog input pins.
of the dsPIC33FJ32GP202/204 and
dsPIC33FJ16GP304 family of devices. It The actual number of analog input pins and external
is not intended to be a comprehensive voltage reference input configuration will depend on the
reference source. To complement the specific device. Refer to the device data sheet for
information in this data sheet, refer to the further details.
dsPIC33F Family Reference Manual, A block diagram of the ADC for the
“Section 28. Analog-to-Digital dsPIC33FJ16GP304 and dsPIC33FJ32GP204 devices
Converter (ADC) without DMA” is shown in Figure 17-1. A block diagram of the ADC for
(DS70210), which is available on the the dsPIC33FJ32GP202 device is shown in
Microchip website (www.microchip.com). Figure 17-2.
The dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
devices have up to 13 Analog-to-Digital Conversion 17.2 ADC Initialization
(ADC) module input channels.
To configure the ADC module:
The AD12B bit (AD1CON1<10>) allows each of the
1. Select port pins as analog inputs
ADC modules to be configured as either a 10-bit,
(AD1PCFGH<15:0> or AD1PCFGL<15:0>).
4-sample-and-hold ADC (default configuration) or a
12-bit, 1-sample-and-hold ADC. 2. Select voltage reference source to match
expected range on analog inputs
Note: The ADC module must be disabled before (AD1CON2<15:13>).
the AD12B bit can be modified. 3. Select the analog conversion clock to match
desired data rate with processor clock
17.1 Key Features (AD1CON3<7:0>).
The 10-bit ADC configuration has the following key 4. Determine how many sample-and-hold
features: channels will be used (AD1CON2<9:8> and
AD1PCFGH<15:0> or AD1PCFGL<15:0>).
• Successive Approximation (SAR) conversion
5. Select the appropriate sample/conversion
• Conversion speeds of up to 1.1 Msps sequence (AD1CON1<7:5> and
• Up to 13 analog input pins AD1CON3<12:8>).
• External voltage reference input pins 6. Select the way conversion results are presented
• Simultaneous sampling of up to four analog input in the buffer (AD1CON1<9:8>).
pins e) Turn on the ADC module (AD1CON1<15>).
• Automatic Channel Scan mode 7. Configure ADC interrupt (if required):
• Selectable conversion trigger source a) Clear the AD1IF bit.
• Selectable Buffer Fill modes b) Select ADC interrupt priority.
• Four result alignment options (signed/unsigned,
fractional/integer)
• Operation during CPU Sleep and Idle modes
• 16-word conversion result buffer
The 12-bit ADC configuration supports all the above
features, except:
• In the 12-bit configuration, conversion speeds of
up to 500 ksps are supported.
• There is only one sample-and-hold amplifier in the
12-bit configuration, so simultaneous sampling of
multiple channels is not supported.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 167

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
FIGURE 17-1: ADC1 MODULE BLOCK DIAGRAM FOR dsPIC33FJ16GP304 AND
dsPIC33FJ32GP204 DEVICES

AN0

AN12
S/H0
CHANNEL
SCAN +
CH0SB<4:0>
CH0SA<4:0> -

CH0 CSCNA

AN1
VREF-

CH0NA CH0NB
VREF+(1) AVDD VREF-(1) AVSS
AN0
AN3 S/H1
+

CH123SA CH123SB -
CH1(2)
AN6
AN9

VREF- ADC1BUF0
ADC1BUF1
ADC1BUF2
VREFH VREFL
CH123NA CH123NB
SAR ADC
AN1

AN4
S/H2
+ ADC1BUFE
CH123SA CH123SB - ADC1BUFF

CH2(2) AN7
AN10

VREF-

CH123NA CH123NB

AN2

AN5
S/H3
+
CH123SA CH123SB
-
CH3(2)
AN8
AN11

VREF-

CH123NA CH123NB

Alternate
Input Selection

Note 1: VREF+, VREF- inputs can be multiplexed with other analog inputs.
2: Channels 1, 2 and 3 are not applicable for the 12-bit mode of operation.

DS70290B-page 168 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
FIGURE 17-2: ADC1 MODULE BLOCK DIAGRAM FOR dsPIC33FJ32GP202 DEVICES

AN0

AN12
S/H0
CHANNEL
SCAN +
CH0SB<4:0>
CH0SA<4:0> -

CH0 CSCNA

AN1
VREF-

CH0NA CH0NB
VREF+(1) AVDD VREF-(1) AVSS
AN0
AN3 S/H1
+

CH123SA CH123SB -
CH1(2)

AN9

VREF- ADC1BUF0
ADC1BUF1
ADC1BUF2
VREFH VREFL
CH123NA CH123NB
SAR ADC
AN1

AN4
S/H2
+ ADC1BUFE
CH123SA CH123SB - ADC1BUFF
(2)
CH2

AN10

VREF-

CH123NA CH123NB

AN2

AN5
S/H3
+
CH123SA CH123SB
(2) -
CH3

AN11

VREF-

CH123NA CH123NB

Alternate
Input Selection

Note 1: VREF+, VREF- inputs can be multiplexed with other analog inputs.
2: Channels 1, 2 and 3 are not applicable for the 12-bit mode of operation.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 169

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

FIGURE 17-3: ADC CONVERSION CLOCK PERIOD BLOCK DIAGRAM

AD1CON3<15>

ADC Internal
RC Clock(2) 0
TAD
AD1CON3<5:0> 1

ADC Conversion
TCY Clock Multiplier
TOSC(1) X2
1, 2, 3, 4, 5,..., 64

Note 1: Refer to Figure 7-2 for the derivation of FOSC when the PLL is enabled. If the PLL is not used, FOSC is equal
to the clock frequency. TOSC = 1/FOSC.
2: See the ADC Electrical Characteristics for the exact RC clock value.

DS70290B-page 170 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 17-1: AD1CON1: ADC1 CONTROL REGISTER 1

R/W-0 U-0 R/W-0 U-0 U-0 R/W-0 R/W-0 R/W-0
ADON — ADSIDL — — AD12B FORM<1:0>
bit 15 bit 8

R/W-0 R/W-0 R/W-0 U-0 R/W-0 R/W-0 R/W-0 R/C-0

HC,HS HC, HS
SSRC<2:0> — SIMSAM ASAM SAMP DONE
bit 7 bit 0

Legend: HC = Cleared by hardware HS = Set by hardware

R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15 ADON: ADC Operating Mode bit

1 = ADC module is operating
0 = ADC is off
bit 14 Unimplemented: Read as ‘0’
bit 13 ADSIDL: Stop in Idle Mode bit
1 = Discontinue module operation when device enters Idle mode
0 = Continue module operation in Idle mode
bit 12-11 Unimplemented: Read as ‘0’
bit 10 AD12B: 10-bit or 12-bit Operation Mode bit
1 = 12-bit, 1-channel ADC operation
0 = 10-bit, 4-channel ADC operation
bit 9-8 FORM<1:0>: Data Output Format bits
For 10-bit operation:
11 = Signed fractional (DOUT = sddd dddd dd00 0000, where s = .NOT.d<9>)
10 = Fractional (DOUT = dddd dddd dd00 0000)
01 = Signed integer (DOUT = ssss sssd dddd dddd, where s = .NOT.d<9>)
00 = Integer (DOUT = 0000 00dd dddd dddd)
For 12-bit operation:
11 = Signed fractional (DOUT = sddd dddd dddd 0000, where s = .NOT.d<11>)
10 = Fractional (DOUT = dddd dddd dddd 0000)
01 = Signed Integer (DOUT = ssss sddd dddd dddd, where s = .NOT.d<11>)
00 = Integer (DOUT = 0000 dddd dddd dddd)
bit 7-5 SSRC<2:0>: Sample Clock Source Select bits
111 = Internal counter ends sampling and starts conversion (auto-convert)
110 = Reserved
101 = Motor Control PWM2 interval ends sampling and starts conversion
100 = Reserved
011 = Motor Control PWM1 interval ends sampling and starts conversion
010 = GP timer 3 compare ends sampling and starts conversion
001 = Active transition on INT0 pin ends sampling and starts conversion
000 = Clearing sample bit ends sampling and starts conversion
bit 4 Unimplemented: Read as ‘0’
bit 3 SIMSAM: Simultaneous Sample Select bit (applicable only when CHPS<1:0> = 01 or 1x)
When AD12B = 1, SIMSAM is: U-0, Unimplemented, Read as ‘0’
1 = Samples CH0, CH1, CH2, CH3 simultaneously (when CHPS<1:0> = 1x); or
Samples CH0 and CH1 simultaneously (when CHPS<1:0> = 01)
0 = Samples multiple channels individually in sequence

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 171

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 17-1: AD1CON1: ADC1 CONTROL REGISTER 1 (CONTINUED)

bit 2 ASAM: ADC Sample Auto-Start bit
1 = Sampling begins immediately after last conversion. SAMP bit is auto-set
0 = Sampling begins when SAMP bit is set
bit 1 SAMP: ADC Sample Enable bit
1 = ADC sample-and-hold amplifiers are sampling
0 = ADC sample-and-hold amplifiers are holding
If ASAM = 0, software can write ‘1’ to begin sampling. Automatically set by hardware if ASAM = 1.
If SSRC = 000, software can write ‘0’ to end sampling and start conversion. If SSRC ≠ 000,
automatically cleared by hardware to end sampling and start conversion.
bit 0 DONE: ADC Conversion Status bit
1 = ADC conversion cycle is completed
0 = ADC conversion not started or in progress
Automatically set by hardware when ADC conversion is complete. Software can write ‘0’ to clear
DONE status (software not allowed to write ‘1’). Clearing this bit will NOT affect any operation in
progress. Automatically cleared by hardware at start of a new conversion.

DS70290B-page 172 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 17-2: AD1CON2: ADC1 CONTROL REGISTER 2

R/W-0 R/W-0 R/W-0 U-0 U-0 R/W-0 R/W-0 R/W-0
VCFG<2:0> — — CSCNA CHPS<1:0>
bit 15 bit 8

R-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

BUFS — SMPI<3:0> BUFM ALTS
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-13 VCFG<2:0>: Converter Voltage Reference Configuration bits

ADREF+ ADREF-
000 AVDD AVSS
001 External VREF+ AVSS
010 AVDD External VREF-
011 External VREF+ External VREF-
1xx AVDD Avss

bit 12-11 Unimplemented: Read as ‘0’

bit 10 CSCNA: Scan Input Selections for CH0+ during Sample A bit
1 = Scan inputs
0 = Do not scan inputs
bit 9-8 CHPS<1:0>: Select Channels Utilized bits
When AD12B = 1, CHPS<1:0> is: U-0, Unimplemented, Read as ‘0’
1x = Converts CH0, CH1, CH2 and CH3
01 = Converts CH0 and CH1
00 = Converts CH0
bit 7 BUFS: Buffer Fill Status bit (valid only when BUFM = 1)
1 = ADC is currently filling second half of buffer, user application should access data in the first half
0 = ADC is currently filling first half of buffer, user application should access data in the second half
bit 6 Unimplemented: Read as ‘0’
bit 5-2 SMPI<3:0>: Sample/Convert Sequences Per Interrupt Selection bits
1111 = Interrupts at the completion of conversion for each 16th sample/convert sequence
1110 = Interrupts at the completion of conversion for each 15th sample/convert sequence
•
•
•
0001 = Interrupts at the completion of conversion for each 2nd sample/convert sequence
0000 = Interrupts at the completion of conversion for each sample/convert sequence
bit 1 BUFM: Buffer Fill Mode Select bit
1 = Starts filling first half of buffer on first interrupt and the second half of buffer on next interrupt
0 = Always starts filling buffer from the beginning
bit 0 ALTS: Alternate Input Sample Mode Select bit
1 = Uses channel input selects for Sample A on first sample and Sample B on next sample
0 = Always uses channel input selects for Sample A

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 173

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 17-3: AD1CON3: ADC1 CONTROL REGISTER 3

R/W-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
ADRC — — SAMC<4:0>
bit 15 bit 8

R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

ADCS<7:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15 ADRC: ADC Conversion Clock Source bit

1 = ADC internal RC clock
0 = Clock derived from system clock
bit 14-13 Unimplemented: Read as ‘0’
bit 12-8 SAMC<4:0>: Auto Sample Time bits
11111 = 31 TAD
•
•
•
00001 = 1 TAD
00000 = 0 TAD
bit 7-0 ADCS<7:0>: ADC Conversion Clock Select bits
11111111 = TCY · (ADCS<7:0> + 1) = 256 · TCY = TAD
•
•
•
00000010 = TCY · (ADCS<7:0> + 1) = 3 · TCY = TAD
00000001 = TCY · (ADCS<7:0> + 1) = 2 · TCY = TAD
00000000 = TCY · (ADCS<7:0> + 1) = 1 · TCY = TAD

DS70290B-page 174 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 17-4: AD1CHS123: ADC1 INPUT CHANNEL 1, 2, 3 SELECT REGISTER

U-0 U-0 U-0 U-0 U-0 R/W-0 R/W-0 R/W-0
— — — — — CH123NB<1:0> CH123SB
bit 15 bit 8

U-0 U-0 U-0 U-0 U-0 R/W-0 R/W-0 R/W-0

— — — — — CH123NA<1:0> CH123SA
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-11 Unimplemented: Read as ‘0’

bit 10-9 CH123NB<1:0>: Channel 1, 2, 3 Negative Input Select for Sample B bits
dsPIC33FJ32GP202 devices only:
If AD12B = 1:
11 = Reserved
10 = Reserved
01 = Reserved
00 = Reserved

If AD12B = 0:
11 = CH1 negative input is AN9, CH2 negative input is AN10, CH3 negative input is AN11
10 = Reserved
01 = CH1, CH2, CH3 negative input is VREF-
00 = CH1, CH2, CH3 negative input is VREF-

dsPIC33FJ32GP204 and dsPIC33FJ16GP304 devices only:

If AD12B = 1:
11 = Reserved
10 = Reserved
01 = Reserved
00 = Reserved

If AD12B = 0:
11 = CH1 negative input is AN9, CH2 negative input is AN10, CH3 negative input is AN11
10 = CH1 negative input is AN6, CH2 negative input is AN7, CH3 negative input is AN8
01 = CH1, CH2, CH3 negative input is VREF-
00 = CH1, CH2, CH3 negative input is VREF-
bit 8 CH123SB: Channel 1, 2, 3 Positive Input Select for Sample B bit
If AD12B = 1:
1 = Reserved
0 = Reserved

If AD12B = 0:
1 = CH1 positive input is AN3, CH2 positive input is AN4, CH3 positive input is AN5
0 = CH1 positive input is AN0, CH2 positive input is AN1, CH3 positive input is AN2
bit 7-3 Unimplemented: Read as ‘0’

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 175

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 17-4: AD1CHS123: ADC1 INPUT CHANNEL 1, 2, 3 SELECT REGISTER (CONTINUED)

bit 2-1 CH123NA<1:0>: Channel 1, 2, 3 Negative Input Select for Sample A bits
dsPIC33FJ32GP202 devices only:
If AD12B = 1:
11 = Reserved
10 = Reserved
01 = Reserved
00 = Reserved

If AD12B = 0:
11 = CH1 negative input is AN9, CH2 negative input is AN10, CH3 negative input is AN11
10 = Reserved
01 = CH1, CH2, CH3 negative input is VREF-
00 = CH1, CH2, CH3 negative input is VREF-

dsPIC33FJ32GP204 and dsPIC33FJ16GP304 devices only:

If AD12B = 1:
11 = Reserved
10 = Reserved
01 = Reserved
00 = Reserved

If AD12B = 0:
11 = CH1 negative input is AN9, CH2 negative input is AN10, CH3 negative input is AN11
10 = CH1 negative input is AN6, CH2 negative input is AN7, CH3 negative input is AN8
01 = CH1, CH2, CH3 negative input is VREF-
00 = CH1, CH2, CH3 negative input is VREF-
bit 0 CH123SA: Channel 1, 2, 3 Positive Input Select for Sample A bit
If AD12B = 1:
1 = Reserved
0 = Reserved

If AD12B = 0:
1 = CH1 positive input is AN3, CH2 positive input is AN4, CH3 positive input is AN5
0 = CH1 positive input is AN0, CH2 positive input is AN1, CH3 positive input is AN2

DS70290B-page 176 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 17-5: AD1CHS0: ADC1 INPUT CHANNEL 0 SELECT REGISTER

R/W-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
CH0NB — — CH0SB<4:0>
bit 15 bit 8

R/W-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

CH0NA — — CH0SA<4:0>
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15 CH0NB: Channel 0 Negative Input Select for Sample B bit

1 = Channel 0 negative input is AN1
0 = Channel 0 negative input is VREF-
bit 14-13 Unimplemented: Read as ‘0’
bit 12-8 CH0SB<4:0>: Channel 0 Positive Input Select for Sample B bits
dsPIC33FJ32GP204 and dsPIC33FJ16GP304 devices only:
01100 = Channel 0 positive input is AN12
•
•
•
00010 = Channel 0 positive input is AN2
00001 = Channel 0 positive input is AN1
00000 = Channel 0 positive input is AN0

dsPIC33FJ32GP202 devices only:

01100 = Channel 0 positive input is AN12
•
•
•
01000 = Reserved
00111 = Reserved
00110 = Reserved
•
•
•
00010 = Channel 0 positive input is AN2
00001 = Channel 0 positive input is AN1
00000 = Channel 0 positive input is AN0
bit 7 CH0NA: Channel 0 Negative Input Select for Sample A bit
1 = Channel 0 negative input is AN1
0 = Channel 0 negative input is VREF-
bit 6-5 Unimplemented: Read as ‘0’

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 177

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 17-5: AD1CHS0: ADC1 INPUT CHANNEL 0 SELECT REGISTER (CONTINUED)

bit 4-0 CH0SA<4:0>: Channel 0 Positive Input Select for Sample A bits
dsPIC33FJ32GP204 and dsPIC33FJ16GP304 devices only:
01100 = Channel 0 positive input is AN12
•
•
•
00010 = Channel 0 positive input is AN2
00001 = Channel 0 positive input is AN1
00000 = Channel 0 positive input is AN0

dsPIC33FJ32GP202 devices only:

01100 = Channel 0 positive input is AN12
•
•
•
01000 = Reserved
00111 = Reserved
00110 = Reserved
•
•
•
00010 = Channel 0 positive input is AN2
00001 = Channel 0 positive input is AN1
00000 = Channel 0 positive input is AN0

DS70290B-page 178 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 17-6: AD1CSSL: ADC1 INPUT SCAN SELECT REGISTER LOW(1)

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
— — — CSS12 CSS11 CSS10 CSS9 CSS8
bit 15 bit 8

R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

CSS7 CSS6 CSS5 CSS4 CSS3 CSS2 CSS1 CSS0
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-13 Unimplemented: Read as ‘0’

bit 12-0 CSS<12:0>: ADC Input Scan Selection bits
1 = Select ANx for input scan
0 = Skip ANx for input scan

Note 1: On dsPIC33FJ32GP202, all AD1CSSL bits can be selected. However, inputs selected for scan without a
corresponding input on device will convert ADREF-.

REGISTER 17-7: AD1PCFGL: ADC1 PORT CONFIGURATION REGISTER LOW(1)

U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
— — — PCFG12 PCFG11 PCFG10 PCFG9 PCFG8
bit 15 bit 8

R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

PCFG7 PCFG6 PCFG5 PCFG4 PCFG3 PCFG2 PCFG1 PCFG0
bit 7 bit 0

Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15-13 Unimplemented: Read as ‘0’

bit 12-0 PCFG<12:0>: ADC Port Configuration Control bits
1 = Port pin in Digital mode, port read input enabled, ADC input multiplexer connected to AVSS
0 = Port pin in Analog mode, port read input disabled, ADC samples pin voltage

Note 1: On dsPIC33FJ32GP202 devices, all PCFG bits are R/W. However, PCFG bits are ignored on ports without
a corresponding input on device.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 179

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

NOTES:

DS70290B-page 180 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

18.0 SPECIAL FEATURES 18.1 Configuration Bits

Note: This data sheet summarizes the features The Configuration bits can be programmed (read as
of the dsPIC33FJ32GP202/204 and ‘0’), or left unprogrammed (read as ‘1’), to select
dsPIC33FJ16GP304 devices. It is not various device configurations. These bits are mapped
intended to be a comprehensive reference starting at program memory location 0xF80000.
source. To complement the information in The Device Configuration register map is shown in
this data sheet, refer to the “dsPIC33F Table 18-1.
Family Reference Manual”.
The individual Configuration bit descriptions for the
dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 FBS, FGS, FOSCSEL, FOSC, FWDT, FPOR and FICD
devices include several features intended to maximize Configuration registers are shown in Table 18-2.
application flexibility and reliability, and minimize cost Note that address 0xF80000 is beyond the user program
through elimination of external components. These are: memory space. It belongs to the configuration memory
• Flexible configuration space (0x800000-0xFFFFFF), which can only be
• Watchdog Timer (WDT) accessed using table reads and table writes.
• Code Protection and CodeGuard™ Security The upper byte of all device Configuration registers
• JTAG Boundary Scan Interface should always be ‘1111 1111’. This makes them
appear to be NOP instructions in the remote event that
• In-Circuit Serial Programming™ (ICSP™)
their locations are ever executed by accident. Since
• In-Circuit emulation Configuration bits are not implemented in the
corresponding locations, writing ‘1’s to these locations
has no effect on device operation.
To prevent inadvertent configuration changes during
code execution, all programmable Configuration bits
are write-once. After a bit is initially programmed during
a power cycle, it cannot be written to again. Changing
a device configuration requires that power to the device
be cycled.

TABLE 18-1: DEVICE CONFIGURATION REGISTER MAP

Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0xF80000 FBS — — — — BSS<2:0> BWRP
(1)
0xF80002 Reserved Reserved
0xF80004 FGS — — — — — GSS<1:0> GWRP
0xF80006 FOSCSEL IESO — — — FNOSC<2:0>
0xF80008 FOSC FCKSM<1:0> IOL1WAY — — OSCIOFNC POSCMD<1:0>
0xF8000A FWDT FWDTEN WINDIS — WDTPRE WDTPOST<3:0>
0xF8000C FPOR — — — ALTI2C — FPWRT<2:0>
0xF8000E FICD BKBUG COE JTAGEN — — — ICS<1:0>
0xF80010 FUID0 User Unit ID Byte 0
0xF80012 FUID1 User Unit ID Byte 1
0xF80014 FUID2 User Unit ID Byte 2
0xF80016 FUID3 User Unit ID Byte 3
Note 1: These reserved bits read as ‘1’ and must be programmed as ‘1’.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 181

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 18-2: dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 CONFIGURATION BITS

DESCRIPTION
Bit Field Register Description
BWRP FBS Boot Segment Program Flash Write Protection
1 = Boot segment may be written
0 = Boot segment is write-protected
BSS<2:0> FBS dsPIC33FJ32GP202 and dsPIC33FJ32GP204 Devices Only
Boot Segment Program Flash Code Protection Size
X11 = No Boot program Flash segment

Boot space is 768 Instruction Words (except interrupt vectors)

110 = Standard security; boot program Flash segment ends at 0x0007FE
010 = High security; boot program Flash segment ends at 0x0007FE

Boot space is 3840 Instruction Words (except interrupt vectors)

101 = Standard security; boot program Flash segment, ends at
0x001FFE
001 = High security; boot program Flash segment ends at 0x001FFE

Boot space is 7936 Instruction Words (except interrupt vectors)

100 = Standard security; boot program Flash segment ends at 0x003FFE
000 = High security; boot program Flash segment ends at 0x003FFE
BSS<2:0> FBS dsPIC33FJ16GP304 Devices Only
Boot Segment Program Flash Code Protection Size
X11 = No Boot program Flash segment

Boot space is 768 Instruction Words (except interrupt vectors)

110 = Standard security; boot program Flash segment ends at 0x0007FE
010 = High security; boot program Flash segment ends at 0x0007FE

Boot space is 3840 Instruction Words (except interrupt vectors)

101 = Standard security; boot program Flash segment, ends at
0x001FFE
001 = High security; boot program Flash segment ends at 0x001FFE

Boot space is 5376 Instruction Words (except interrupt vectors)

100 = Standard security; boot program Flash segment ends at 0x002BFE
000 = High security; boot program Flash segment ends at 0x002BFE
GSS<1:0> FGS General Segment Code-Protect bit
11 = User program memory is not code-protected
10 = Standard security
0x = High security
GWRP FGS General Segment Write-Protect bit
1 = User program memory is not write-protected
0 = User program memory is write-protected
IESO FOSCSEL Two-speed Oscillator Start-up Enable bit
1 = Start-up device with FRC, then automatically switch to the
user-selected oscillator source when ready
0 = Start-up device with user-selected oscillator source
FNOSC<2:0> FOSCSEL Initial Oscillator Source Selection bits
111 = Internal Fast RC (FRC) oscillator with postscaler
110 = Internal Fast RC (FRC) oscillator with divide-by-16
101 = LPRC oscillator
100 = Secondary (LP) oscillator
011 = Primary (XT, HS, EC) oscillator with PLL
010 = Primary (XT, HS, EC) oscillator
001 = Internal Fast RC (FRC) oscillator with PLL
000 = FRC oscillator

DS70290B-page 182 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 18-2: dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 CONFIGURATION BITS

DESCRIPTION (CONTINUED)
Bit Field Register Description
FCKSM<1:0> FOSC Clock Switching Mode bits
1x = Clock switching is disabled, Fail-Safe Clock Monitor is disabled
01 = Clock switching is enabled, Fail-Safe Clock Monitor is disabled
00 = Clock switching is enabled, Fail-Safe Clock Monitor is enabled
IOL1WAY FOSC Peripheral Pin Select Configuration
1 = Allow only one re-configuration
0 = Allow multiple re-configurations
OSCIOFNC FOSC OSC2 Pin Function bit (except in XT and HS modes)
1 = OSC2 is clock output
0 = OSC2 is general purpose digital I/O pin
POSCMD<1:0> FOSC Primary Oscillator Mode Select bits
11 = Primary oscillator disabled
10 = HS Crystal Oscillator mode
01 = XT Crystal Oscillator mode
00 = EC (External Clock) mode
FWDTEN FWDT Watchdog Timer Enable bit
1 = Watchdog Timer always enabled (LPRC oscillator cannot be disabled.
Clearing the SWDTEN bit in the RCON register will have no effect.)
0 = Watchdog Timer enabled/disabled by user software (LPRC can be
disabled by clearing the SWDTEN bit in the RCON register)
WINDIS FWDT Watchdog Timer Window Enable bit
1 = Watchdog Timer in Non-Window mode
0 = Watchdog Timer in Window mode
WDTPRE FWDT Watchdog Timer Prescaler bit
1 = 1:128
0 = 1:32
WDTPOST<3:0> FWDT Watchdog Timer Postscaler bits
1111 = 1:32,768
1110 = 1:16,384
.
.
.
0001 = 1:2
0000 = 1:1
ALTI2C FPOR Alternate I2C pins
1 = I2C mapped to SDA1/SCL1 pins
0 = I2C mapped to ASDA1/ASCL1 pins
FPWRT<2:0> FPOR Power-on Reset Timer Value Select bits
111 = PWRT = 128 ms
110 = PWRT = 64 ms
101 = PWRT = 32 ms
100 = PWRT = 16 ms
011 = PWRT = 8 ms
010 = PWRT = 4 ms
001 = PWRT = 2 ms
000 = PWRT = Disabled
BKBUG FICD Background Debug Enable bit
1 = Device will reset in User mode
0 = Device will reset in Debug mode
COE FICD Debugger/Emulator Enable bit
1 = Device will reset in Operational mode
0 = Device will reset in Clip-On Emulation mode

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 183

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 18-2: dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 CONFIGURATION BITS

DESCRIPTION (CONTINUED)
Bit Field Register Description
JTAGEN FICD JTAG Enable bit
1 = JTAG enabled
0 = JTAG disabled
ICS<1:0> FICD ICD Communication Channel Select bits
11 = Communicate on PGC1/EMUC1 and PGD1/EMUD1
10 = Communicate on PGC2/EMUC2 and PGD2/EMUD2
01 = Communicate on PGC3/EMUC3 and PGD3/EMUD3
00 = Reserved, do not use

DS70290B-page 184 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

18.2 On-Chip Voltage Regulator 18.3 BOR: Brown-Out Reset

All of the dsPIC33FJ32GP202/204 and The Brown-out Reset (BOR) module is based on an
dsPIC33FJ16GP304 devices power their core digital internal voltage reference circuit that monitors the
logic at a nominal 2.5V. This can create a conflict for regulated voltage VDDCORE. The main purpose of the
designs that are required to operate at a higher typical BOR module is to generate a device Reset when a
voltage, such as 3.3V. To simplify system design, all brown-out condition occurs. Brown-out conditions are
devices in the dsPIC33FJ32GP202/204 and generally caused by glitches on the AC mains (for
dsPIC33FJ16GP304 family incorporate an on-chip reg- example, missing portions of the AC cycle waveform
ulator that allows the device to run its core logic from due to bad power transmission lines, or voltage sags
VDD. due to excessive current draw when a large inductive
The regulator provides power to the core from the other load is turned on).
VDD pins. When the regulator is enabled, a low-ESR A BOR generates a Reset pulse, which resets the
(less than 5 ohms) capacitor (such as tantalum or device. The BOR selects the clock source, based on
ceramic) must be connected to the VDDCORE/VCAP pin the device Configuration bit values (FNOSC<2:0> and
(Figure 18-1). This helps to maintain the stability of the POSCMD<1:0>).
regulator. The recommended value for the filter capac- If an oscillator mode is selected, the BOR activates the
itor is provided in Table 21-13 located in Section 21.1 Oscillator Start-up Timer (OST). The system clock is
“DC Characteristics”. held until OST expires. If the PLL is used, the clock is
Note: It is important for the low-ESR capacitor to held until the LOCK bit (OSCCON<5>) is ‘1’.
be placed as close as possible to the Concurrently, the PWRT time-out (TPWRT) will be
VDDCORE pin. applied before the internal Reset is released. If TPWRT
On a POR, it takes approximately 20 μs for the on-chip = 0 and a crystal oscillator is being used, a nominal
voltage regulator to generate an output voltage. During delay of TFSCM = 100 is applied. The total delay in this
this time, designated as TSTARTUP, code execution is case is TFSCM.
disabled. TSTARTUP is applied every time the device The BOR Status bit (RCON<1>) is set to indicate that a
resumes operation after any power-down. BOR has occurred. The BOR circuit continues to
operate while in Sleep or Idle modes and resets the
FIGURE 18-1: CONNECTIONS FOR THE device should VDD fall below the BOR threshold
ON-CHIP VOLTAGE voltage.
REGULATOR(1)

3.3V
dsPIC33F

VDD

VDDCORE/VCAP
CF
VSS

Note 1: These are typical operating voltages. Refer

to TABLE 21-13: “Internal Voltage
Regulator Specifications” located in
Section 21.1 “DC Characteristics” for the
full operating ranges of VDD and VDDCORE.
2: It is important for the low-ESR capacitor to
be placed as close as possible to the
VDDCORE pin.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 185

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

18.4 Watchdog Timer (WDT) 18.4.2 SLEEP AND IDLE MODES

For dsPIC33FJ32GP202/204 and If the WDT is enabled, it will continue to run during
dsPIC33FJ16GP304 devices, the WDT is driven by the Sleep or Idle modes. When the WDT time-out occurs,
LPRC oscillator. When the WDT is enabled, the clock the device will wake the device and code execution will
source is also enabled. continue from where the PWRSAV instruction was
executed. The corresponding SLEEP or IDLE bits
18.4.1 PRESCALER/POSTSCALER (RCON<3,2>) will need to be cleared in software after
the device wakes up.
The nominal WDT clock source from LPRC is 32 kHz.
This feeds a prescaler than can be configured for either 18.4.3 ENABLING WDT
5-bit (divide-by-32) or 7-bit (divide-by-128) operation.
The prescaler is set by the WDTPRE Configuration bit. The WDT is enabled or disabled by the FWDTEN
With a 32 kHz input, the prescaler yields a nominal Configuration bit in the FWDT Configuration register.
WDT time-out period (TWDT) of 1 ms in 5-bit mode, or When the FWDTEN Configuration bit is set, the WDT is
4 ms in 7-bit mode. always enabled.

A variable postscaler divides down the WDT prescaler The WDT flag bit, WDTO (RCON<4>), is not automatically
output and allows for a wide range of time-out periods. cleared following a WDT time-out. To detect subsequent
The postscaler is controlled by the WDTPOST<3:0> WDT events, the flag must be cleared in software.
Configuration bits (FWDT<3:0>), which allow the selec- The WDT can be optionally controlled in software when
tion of 16 settings, from 1:1 to 1:32,768. Using the pres- the FWDTEN Configuration bit has been programmed
caler and postscaler, time-out periods ranging from to ‘0’. The WDT is enabled in software by setting the
1 ms to 131 seconds can be achieved. SWDTEN control bit (RCON<5>). The SWDTEN
The WDT, prescaler and postscaler are reset: control bit is cleared on any device Reset. The software
WDT option allows the user application to enable the
• On any device Reset WDT for critical code segments and disable the WDT
• On the completion of a clock switch, whether during non-critical segments for maximum power
invoked by software (i.e., setting the OSWEN bit savings.
after changing the NOSC bits) or by hardware
(i.e., Fail-Safe Clock Monitor) Note: If the WINDIS bit (FWDT<6>) is cleared, the
CLRWDT instruction should be executed by
• When a PWRSAV instruction is executed
the application software only during the last
(i.e., Sleep or Idle mode is entered)
1/4 of the WDT period. This CLRWDT
• When the device exits Sleep or Idle mode to window can be determined by using a timer.
resume normal operation If a CLRWDT instruction is executed before
• By a CLRWDT instruction during normal execution this window, a WDT Reset occurs.
Note: The CLRWDT and PWRSAV instructions
clear the prescaler and postscaler counts
when executed.

FIGURE 18-2: WDT BLOCK DIAGRAM

All Device Resets
Transition to New Clock Source
Exit Sleep or Idle Mode
PWRSAV Instruction
CLRWDT Instruction Watchdog Timer

Sleep/Idle
WDTPRE WDTPOST<3:0>
SWDTEN WDT
FWDTEN Wake-up
RS RS 1
Prescaler Postscaler
LPRC Clock (divide by N1) (divide by N2) WDT
0 Reset

WINDIS WDT Window Select

CLRWDT Instruction

DS70290B-page 186 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

18.5 JTAG Interface peripherals) on a single chip. This feature helps protect
individual Intellectual Property in collaborative system
dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 designs.
devices implement a JTAG interface, which supports
boundary scan device testing, as well as in-circuit When coupled with software encryption libraries, Code-
programming. Detailed information on this interface will Guard™ Security can be used to securely update Flash
be provided in future revisions of the document. even when multiple IPs reside on the single chip.
The code protection features are controlled by the
18.6 Code Protection and Configuration registers: FBS and FGS. The Secure
CodeGuard™ Security segment and RAM is not implemented.
Note: Refer to “CodeGuard Security Reference
The dsPIC33FJ32GP202/204 and
Manual” (DS70180) for further information
dsPIC33FJ16GP304 product families offer the
on usage, configuration and operation of
intermediate implementation of CodeGuard™ Security.
CodeGuard Security.
CodeGuard Security enables multiple parties to
securely share resources (memory, interrupts and

TABLE 18-3: CODE FLASH SECURITY TABLE 18-4: CODE FLASH SECURITY
SEGMENT SIZES FOR SEGMENT SIZES FOR
32 KBYTE DEVICES 16 KBYTE DEVICES
CONFIG BITS CONFIG BITS
000000h 000000h
VS = 256 IW 0001FEh VS = 256 IW 0001FEh
000200h 000200h
BSS<2:0> = x11 0007FEh BSS<2:0> = x11 0007FEh
000800h 000800h
001FFEh 001FFEh
0K 002000h 0K 002000h
GS = 11008 IW 003FFEh GS = 5376 IW
004000h
0057FEh 002BFEh
000000h 000000h
VS = 256 IW 0001FEh VS = 256 IW 0001FEh
000200h 000200h
BS = 768 IW 0007FEh BS = 768 IW 0007FEh
BSS<2:0> = x10 000800h BSS<2:0> = x10 000800h
001FFEh 001FFEh
256 002000h 256 002000h
003FFEh
004000h
GS = 10240 IW GS = 4608 IW
0057FEh 002BFEh
000000h 000000h
VS = 256 IW 0001FEh VS = 256 IW 0001FEh
000200h 000200h
BSS<2:0> = x01 BS = 3840 IW 0007FEh BSS<2:0> = x01 BS = 3840 IW 0007FEh
000800h 000800h
001FFEh 001FFEh
768 002000h 768 002000h
003FFEh
004000h
GS = 7168 IW GS = 1536 IW
0057FEh 002BFEh
000000h 000000h
VS = 256 IW 0001FEh VS = 256 IW 0001FEh
000200h 000200h
BS = 7936 IW 0007FEh BS = 5376 IW 0007FEh
BSS<2:0> = x00 000800h BSS<2:0> = x00 000800h
001FFEh 001FFEh
1792 002000h 1792 002000h
003FFEh
004000h
GS = 3072 IW
0057FEh 002BFEh

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 187

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

18.7 In-Circuit Serial Programming 18.8 In-Circuit Debugger

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 When MPLAB® ICD 2 is selected as a debugger, the
family digital signal controllers can be serially pro- in-circuit debugging functionality is enabled. This
grammed while in the end application circuit. This is function allows simple debugging functions when used
done with two lines for clock and data and three other with MPLAB IDE. Debugging functionality is controlled
lines for power, ground and the programming through the EMUCx (Emulation/Debug Clock) and
sequence. Serial programming allows customers to EMUDx (Emulation/Debug Data) pin functions.
manufacture boards with unprogrammed devices and Any of the three pairs of debugging clock/data pins can
then program the digital signal controller just before be used:
shipping the product. Serial programming also allows
the most recent firmware or a custom firmware to be • PGC1/EMUC1 and PGD1/EMUD1
programmed. Refer to the “dsPIC33F Flash Program- • PGC2/EMUC2 and PGD2/EMUD2
ming Specification” (DS70152) document for details • PGC3/EMUC3 and PGD3/EMUD3
about In-Circuit Serial Programming (ICSP).
To use the in-circuit debugger function of the device,
Any of the three pairs of programming clock/data pins the design must implement ICSP connections to
can be used: MCLR, VDD, VSS, PGC, PGD and the EMUDx/EMUCx
• PGC1/EMUC1 and PGD1/EMUD1 pin pair. In addition, when the feature is enabled, some
of the resources are not available for general use.
• PGC2/EMUC2 and PGD2/EMUD2
These resources include the first 80 bytes of data RAM
• PGC3/EMUC3 and PGD3/EMUD3 and two I/O pins.

DS70290B-page 188 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

19.0 INSTRUCTION SET SUMMARY Most bit-oriented instructions (including simple

rotate/shift instructions) have two operands:
Note: This data sheet summarizes the features • The W register (with or without an address
of the dsPIC33FJ32GP202/204 and modifier) or file register (specified by the value of
dsPIC33FJ16GP304 devices. It is not ‘Ws’ or ‘f’)
intended to be a comprehensive reference
• The bit in the W register or file register
source. To complement the information in
(specified by a literal value or indirectly by the
this data sheet, refer to the “dsPIC33F
contents of register ‘Wb’)
Family Reference Manual”.
The literal instructions that involve data movement can
The dsPIC33F instruction set is identical to that of the use some of the following operands:
dsPIC30F.
• A literal value to be loaded into a W register or file
Most instructions are a single program memory word register (specified by ‘k’)
(24 bits). Only three instructions require two program
• The W register or file register where the literal
memory locations.
value is to be loaded (specified by ‘Wb’ or ‘f’)
Each single-word instruction is a 24-bit word, divided
However, literal instructions that involve arithmetic or
into an 8-bit opcode, which specifies the instruction
logical operations use some of the following operands:
type and one or more operands, which further specify
the operation of the instruction. • The first source operand, which is a register ‘Wb’
without any address modifier
The instruction set is highly orthogonal and is grouped
into five basic categories: • The second source operand, which is a literal
value
• Word or byte-oriented operations
• The destination of the result (only if not the same
• Bit-oriented operations as the first source operand), which is typically a
• Literal operations register ‘Wd’ with or without an address modifier
• DSP operations The MAC class of DSP instructions can use some of the
• Control operations following operands:
Table 19-1 shows the general symbols used in • The accumulator (A or B) to be used (required
describing the instructions. operand)
The dsPIC33F instruction set summary in Table 19-2 • The W registers to be used as the two operands
lists all the instructions, along with the status flags • The X and Y address space prefetch operations
affected by each instruction. • The X and Y address space prefetch destinations
Most word or byte-oriented W register instructions • The accumulator write back destination
(including barrel shift instructions) have three
The other DSP instructions do not involve any
operands:
multiplication and can include:
• The first source operand, which is typically a
• The accumulator to be used (required)
register ‘Wb’ without any address modifier
• The source or destination operand (designated as
• The second source operand, which is typically a
Wso or Wdo, respectively) with or without an
register ‘Ws’ with or without an address modifier
address modifier
• The destination of the result, which is typically a
• The amount of shift specified by a W register ‘Wn’
register ‘Wd’ with or without an address modifier
or a literal value
However, word or byte-oriented file register instructions
The control instructions can use some of the following
have two operands:
operands:
• The file register specified by the value ‘f’
• A program memory address
• The destination, which could be either the file
• The mode of the table read and table write
register ‘f’ or the W0 register, which is denoted as
instructions
‘WREG’

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 189

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

Most instructions are a single word. Certain (unconditional/computed branch), indirect CALL/GOTO,
double-word instructions are designed to provide all of all table reads and writes and RETURN/RETFIE
the required information in these 48 bits. In the second instructions, which are single-word instructions but take
word, the 8 MSbs are ‘0’s. If this second word is two or three cycles. Certain instructions that involve skip-
executed as an instruction (by itself), it will execute as ping over the subsequent instruction require either two
a NOP. The double-word instructions execute in two or three cycles if the skip is performed, depending on
instruction cycles. whether the instruction being skipped is a single-word or
Most single-word instructions are executed in a single two-word instruction. Moreover, double-word moves
instruction cycle, unless a conditional test is true, or the require two cycles.
program counter is changed as a result of the Note: For more details on the instruction set,
instruction. In these cases, the execution takes two refer to the “dsPIC30F/33F Programmer’s
instruction cycles with the additional instruction cycle(s) Reference Manual” (DS70157).
executed as a NOP. Notable exceptions are the BRA

TABLE 19-1: SYMBOLS USED IN OPCODE DESCRIPTIONS

Field Description

#text Means literal defined by “text”

(text) Means “content of text”
[text] Means “the location addressed by text”
{ } Optional field or operation
<n:m> Register bit field
.b Byte mode selection
.d Double-Word mode selection
.S Shadow register select
.w Word mode selection (default)
Acc One of two accumulators {A, B}
AWB Accumulator write back destination address register ∈ {W13, [W13]+ = 2}
bit4 4-bit bit selection field (used in word addressed instructions) ∈ {0...15}
C, DC, N, OV, Z MCU Status bits: Carry, Digit Carry, Negative, Overflow, Sticky Zero
Expr Absolute address, label or expression (resolved by the linker)
f File register address ∈ {0x0000...0x1FFF}
lit1 1-bit unsigned literal ∈ {0,1}
lit4 4-bit unsigned literal ∈ {0...15}
lit5 5-bit unsigned literal ∈ {0...31}
lit8 8-bit unsigned literal ∈ {0...255}
lit10 10-bit unsigned literal ∈ {0...255} for Byte mode, {0:1023} for Word mode
lit14 14-bit unsigned literal ∈ {0...16384}
lit16 16-bit unsigned literal ∈ {0...65535}
lit23 23-bit unsigned literal ∈ {0...8388608}; LSb must be ‘0’
None Field does not require an entry, may be blank
OA, OB, SA, SB DSP Status bits: AccA Overflow, AccB Overflow, AccA Saturate, AccB Saturate
PC Program Counter
Slit10 10-bit signed literal ∈ {-512...511}
Slit16 16-bit signed literal ∈ {-32768...32767}
Slit6 6-bit signed literal ∈ {-16...16}
Wb Base W register ∈ {W0..W15}
Wd Destination W register ∈ { Wd, [Wd], [Wd++], [Wd--], [++Wd], [--Wd] }
Wdo Destination W register ∈
{ Wnd, [Wnd], [Wnd++], [Wnd--], [++Wnd], [--Wnd], [Wnd+Wb] }
Wm,Wn Dividend, Divisor working register pair (direct addressing)

DS70290B-page 190 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 19-1: SYMBOLS USED IN OPCODE DESCRIPTIONS (CONTINUED)

Field Description

Wm*Wm Multiplicand and Multiplier working register pair for Square instructions ∈
{W4 * W4,W5 * W5,W6 * W6,W7 * W7}
Wm*Wn Multiplicand and Multiplier working register pair for DSP instructions ∈
{W4 * W5,W4 * W6,W4 * W7,W5 * W6,W5 * W7,W6 * W7}
Wn One of 16 working registers ∈ {W0..W15}
Wnd One of 16 destination working registers ∈ {W0..W15}
Wns One of 16 source working registers ∈ {W0..W15}
WREG W0 (working register used in file register instructions)
Ws Source W register ∈ { Ws, [Ws], [Ws++], [Ws--], [++Ws], [--Ws] }
Wso Source W register ∈
{ Wns, [Wns], [Wns++], [Wns--], [++Wns], [--Wns], [Wns+Wb] }
Wx X data space prefetch address register for DSP instructions
∈ {[W8]+ = 6, [W8]+ = 4, [W8]+ = 2, [W8], [W8]- = 6, [W8]- = 4, [W8]- = 2,
[W9]+ = 6, [W9]+ = 4, [W9]+ = 2, [W9], [W9]- = 6, [W9]- = 4, [W9]- = 2,
[W9 + W12], none}
Wxd X data space prefetch destination register for DSP instructions ∈ {W4..W7}
Wy Y data space prefetch address register for DSP instructions
∈ {[W10]+ = 6, [W10]+ = 4, [W10]+ = 2, [W10], [W10]- = 6, [W10]- = 4, [W10]- = 2,
[W11]+ = 6, [W11]+ = 4, [W11]+ = 2, [W11], [W11]- = 6, [W11]- = 4, [W11]- = 2,
[W11 + W12], none}
Wyd Y data space prefetch destination register for DSP instructions ∈ {W4..W7}

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 191

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
TABLE 19-2: INSTRUCTION SET OVERVIEW
Base
Assembly # of # of Status Flags
Instr Assembly Syntax Description
Mnemonic Words Cycles Affected
#

1 ADD ADD Acc Add Accumulators 1 1 OA,OB,SA,SB

ADD f f = f + WREG 1 1 C,DC,N,OV,Z
ADD f,WREG WREG = f + WREG 1 1 C,DC,N,OV,Z
ADD #lit10,Wn Wd = lit10 + Wd 1 1 C,DC,N,OV,Z
ADD Wb,Ws,Wd Wd = Wb + Ws 1 1 C,DC,N,OV,Z
ADD Wb,#lit5,Wd Wd = Wb + lit5 1 1 C,DC,N,OV,Z
ADD Wso,#Slit4,Acc 16-bit Signed Add to Accumulator 1 1 OA,OB,SA,SB
2 ADDC ADDC f f = f + WREG + (C) 1 1 C,DC,N,OV,Z
ADDC f,WREG WREG = f + WREG + (C) 1 1 C,DC,N,OV,Z
ADDC #lit10,Wn Wd = lit10 + Wd + (C) 1 1 C,DC,N,OV,Z
ADDC Wb,Ws,Wd Wd = Wb + Ws + (C) 1 1 C,DC,N,OV,Z
ADDC Wb,#lit5,Wd Wd = Wb + lit5 + (C) 1 1 C,DC,N,OV,Z
3 AND AND f f = f .AND. WREG 1 1 N,Z
AND f,WREG WREG = f .AND. WREG 1 1 N,Z
AND #lit10,Wn Wd = lit10 .AND. Wd 1 1 N,Z
AND Wb,Ws,Wd Wd = Wb .AND. Ws 1 1 N,Z
AND Wb,#lit5,Wd Wd = Wb .AND. lit5 1 1 N,Z
4 ASR ASR f f = Arithmetic Right Shift f 1 1 C,N,OV,Z
ASR f,WREG WREG = Arithmetic Right Shift f 1 1 C,N,OV,Z
ASR Ws,Wd Wd = Arithmetic Right Shift Ws 1 1 C,N,OV,Z
ASR Wb,Wns,Wnd Wnd = Arithmetic Right Shift Wb by Wns 1 1 N,Z
ASR Wb,#lit5,Wnd Wnd = Arithmetic Right Shift Wb by lit5 1 1 N,Z
5 BCLR BCLR f,#bit4 Bit Clear f 1 1 None
BCLR Ws,#bit4 Bit Clear Ws 1 1 None
6 BRA BRA C,Expr Branch if Carry 1 1 (2) None
BRA GE,Expr Branch if greater than or equal 1 1 (2) None
BRA GEU,Expr Branch if unsigned greater than or equal 1 1 (2) None
BRA GT,Expr Branch if greater than 1 1 (2) None
BRA GTU,Expr Branch if unsigned greater than 1 1 (2) None
BRA LE,Expr Branch if less than or equal 1 1 (2) None
BRA LEU,Expr Branch if unsigned less than or equal 1 1 (2) None
BRA LT,Expr Branch if less than 1 1 (2) None
BRA LTU,Expr Branch if unsigned less than 1 1 (2) None
BRA N,Expr Branch if Negative 1 1 (2) None
BRA NC,Expr Branch if Not Carry 1 1 (2) None
BRA NN,Expr Branch if Not Negative 1 1 (2) None
BRA NOV,Expr Branch if Not Overflow 1 1 (2) None
BRA NZ,Expr Branch if Not Zero 1 1 (2) None
BRA OA,Expr Branch if Accumulator A overflow 1 1 (2) None
BRA OB,Expr Branch if Accumulator B overflow 1 1 (2) None
BRA OV,Expr Branch if Overflow 1 1 (2) None
BRA SA,Expr Branch if Accumulator A saturated 1 1 (2) None
BRA SB,Expr Branch if Accumulator B saturated 1 1 (2) None
BRA Expr Branch Unconditionally 1 2 None
BRA Z,Expr Branch if Zero 1 1 (2) None
BRA Wn Computed Branch 1 2 None
7 BSET BSET f,#bit4 Bit Set f 1 1 None
BSET Ws,#bit4 Bit Set Ws 1 1 None
8 BSW BSW.C Ws,Wb Write C bit to Ws<Wb> 1 1 None
BSW.Z Ws,Wb Write Z bit to Ws<Wb> 1 1 None
9 BTG BTG f,#bit4 Bit Toggle f 1 1 None
BTG Ws,#bit4 Bit Toggle Ws 1 1 None

DS70290B-page 192 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 19-2: INSTRUCTION SET OVERVIEW (CONTINUED)

Base
Assembly # of # of Status Flags
Instr Assembly Syntax Description
Mnemonic Words Cycles Affected
#

10 BTSC BTSC f,#bit4 Bit Test f, Skip if Clear 1 1 None

(2 or 3)
BTSC Ws,#bit4 Bit Test Ws, Skip if Clear 1 1 None
(2 or 3)
11 BTSS BTSS f,#bit4 Bit Test f, Skip if Set 1 1 None
(2 or 3)
BTSS Ws,#bit4 Bit Test Ws, Skip if Set 1 1 None
(2 or 3)
12 BTST BTST f,#bit4 Bit Test f 1 1 Z
BTST.C Ws,#bit4 Bit Test Ws to C 1 1 C
BTST.Z Ws,#bit4 Bit Test Ws to Z 1 1 Z
BTST.C Ws,Wb Bit Test Ws<Wb> to C 1 1 C
BTST.Z Ws,Wb Bit Test Ws<Wb> to Z 1 1 Z
13 BTSTS BTSTS f,#bit4 Bit Test then Set f 1 1 Z
BTSTS.C Ws,#bit4 Bit Test Ws to C, then Set 1 1 C
BTSTS.Z Ws,#bit4 Bit Test Ws to Z, then Set 1 1 Z
14 CALL CALL lit23 Call subroutine 2 2 None
CALL Wn Call indirect subroutine 1 2 None
15 CLR CLR f f = 0x0000 1 1 None
CLR WREG WREG = 0x0000 1 1 None
CLR Ws Ws = 0x0000 1 1 None
CLR Acc,Wx,Wxd,Wy,Wyd,AWB Clear Accumulator 1 1 OA,OB,SA,SB
16 CLRWDT CLRWDT Clear Watchdog Timer 1 1 WDTO,Sleep
17 COM COM f f=f 1 1 N,Z
COM f,WREG WREG = f 1 1 N,Z
COM Ws,Wd Wd = Ws 1 1 N,Z
18 CP CP f Compare f with WREG 1 1 C,DC,N,OV,Z
CP Wb,#lit5 Compare Wb with lit5 1 1 C,DC,N,OV,Z
CP Wb,Ws Compare Wb with Ws (Wb – Ws) 1 1 C,DC,N,OV,Z
19 CP0 CP0 f Compare f with 0x0000 1 1 C,DC,N,OV,Z
CP0 Ws Compare Ws with 0x0000 1 1 C,DC,N,OV,Z
20 CPB CPB f Compare f with WREG, with Borrow 1 1 C,DC,N,OV,Z
CPB Wb,#lit5 Compare Wb with lit5, with Borrow 1 1 C,DC,N,OV,Z
CPB Wb,Ws Compare Wb with Ws, with Borrow 1 1 C,DC,N,OV,Z
(Wb - Ws - C)
21 CPSEQ CPSEQ Wb, Wn Compare Wb with Wn, skip if = 1 1 None
(2 or 3)
22 CPSGT CPSGT Wb, Wn Compare Wb with Wn, skip if > 1 1 None
(2 or 3)
23 CPSLT CPSLT Wb, Wn Compare Wb with Wn, skip if < 1 1 None
(2 or 3)
24 CPSNE CPSNE Wb, Wn Compare Wb with Wn, skip if ≠ 1 1 None
(2 or 3)
25 DAW DAW Wn Wn = decimal adjust Wn 1 1 C
26 DEC DEC f f=f-1 1 1 C,DC,N,OV,Z
DEC f,WREG WREG = f - 1 1 1 C,DC,N,OV,Z
DEC Ws,Wd Wd = Ws - 1 1 1 C,DC,N,OV,Z
27 DEC2 DEC2 f f=f-2 1 1 C,DC,N,OV,Z
DEC2 f,WREG WREG = f - 2 1 1 C,DC,N,OV,Z
DEC2 Ws,Wd Wd = Ws - 2 1 1 C,DC,N,OV,Z
28 DISI DISI #lit14 Disable Interrupts for k instruction cycles 1 1 None

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 193

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 19-2: INSTRUCTION SET OVERVIEW (CONTINUED)

Base
Assembly # of # of Status Flags
Instr Assembly Syntax Description
Mnemonic Words Cycles Affected
#

29 DIV DIV.S Wm,Wn Signed 16/16-bit Integer Divide 1 18 N,Z,C,OV

DIV.SD Wm,Wn Signed 32/16-bit Integer Divide 1 18 N,Z,C,OV
DIV.U Wm,Wn Unsigned 16/16-bit Integer Divide 1 18 N,Z,C,OV
DIV.UD Wm,Wn Unsigned 32/16-bit Integer Divide 1 18 N,Z,C,OV
30 DIVF DIVF Wm,Wn Signed 16/16-bit Fractional Divide 1 18 N,Z,C,OV
31 DO DO #lit14,Expr Do code to PC + Expr, lit14 + 1 times 2 2 None
DO Wn,Expr Do code to PC + Expr, (Wn) + 1 times 2 2 None
32 ED ED Wm*Wm,Acc,Wx,Wy,Wxd Euclidean Distance (no accumulate) 1 1 OA,OB,OAB,
SA,SB,SAB
33 EDAC EDAC Wm*Wm,Acc,Wx,Wy,Wxd Euclidean Distance 1 1 OA,OB,OAB,
SA,SB,SAB
34 EXCH EXCH Wns,Wnd Swap Wns with Wnd 1 1 None
35 FBCL FBCL Ws,Wnd Find Bit Change from Left (MSb) Side 1 1 C
36 FF1L FF1L Ws,Wnd Find First One from Left (MSb) Side 1 1 C
37 FF1R FF1R Ws,Wnd Find First One from Right (LSb) Side 1 1 C
38 GOTO GOTO Expr Go to address 2 2 None
GOTO Wn Go to indirect 1 2 None
39 INC INC f f=f+1 1 1 C,DC,N,OV,Z
INC f,WREG WREG = f + 1 1 1 C,DC,N,OV,Z
INC Ws,Wd Wd = Ws + 1 1 1 C,DC,N,OV,Z
40 INC2 INC2 f f=f+2 1 1 C,DC,N,OV,Z
INC2 f,WREG WREG = f + 2 1 1 C,DC,N,OV,Z
INC2 Ws,Wd Wd = Ws + 2 1 1 C,DC,N,OV,Z
41 IOR IOR f f = f .IOR. WREG 1 1 N,Z
IOR f,WREG WREG = f .IOR. WREG 1 1 N,Z
IOR #lit10,Wn Wd = lit10 .IOR. Wd 1 1 N,Z
IOR Wb,Ws,Wd Wd = Wb .IOR. Ws 1 1 N,Z
IOR Wb,#lit5,Wd Wd = Wb .IOR. lit5 1 1 N,Z
42 LAC LAC Wso,#Slit4,Acc Load Accumulator 1 1 OA,OB,OAB,
SA,SB,SAB
43 LNK LNK #lit14 Link Frame Pointer 1 1 None
44 LSR LSR f f = Logical Right Shift f 1 1 C,N,OV,Z
LSR f,WREG WREG = Logical Right Shift f 1 1 C,N,OV,Z
LSR Ws,Wd Wd = Logical Right Shift Ws 1 1 C,N,OV,Z
LSR Wb,Wns,Wnd Wnd = Logical Right Shift Wb by Wns 1 1 N,Z
LSR Wb,#lit5,Wnd Wnd = Logical Right Shift Wb by lit5 1 1 N,Z
45 MAC MAC Wm*Wn,Acc,Wx,Wxd,Wy,Wyd Multiply and Accumulate 1 1 OA,OB,OAB,
, SA,SB,SAB
AWB
MAC Wm*Wm,Acc,Wx,Wxd,Wy,Wyd Square and Accumulate 1 1 OA,OB,OAB,
SA,SB,SAB
46 MOV MOV f,Wn Move f to Wn 1 1 None
MOV f Move f to f 1 1 N,Z
MOV f,WREG Move f to WREG 1 1 N,Z
MOV #lit16,Wn Move 16-bit literal to Wn 1 1 None
MOV.b #lit8,Wn Move 8-bit literal to Wn 1 1 None
MOV Wn,f Move Wn to f 1 1 None
MOV Wso,Wdo Move Ws to Wd 1 1 None
MOV WREG,f Move WREG to f 1 1 N,Z
MOV.D Wns,Wd Move Double from W(ns):W(ns + 1) to Wd 1 2 None
MOV.D Ws,Wnd Move Double from Ws to W(nd + 1):W(nd) 1 2 None
47 MOVSAC MOVSAC Acc,Wx,Wxd,Wy,Wyd,AWB Prefetch and store accumulator 1 1 None

DS70290B-page 194 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 19-2: INSTRUCTION SET OVERVIEW (CONTINUED)

Base
Assembly # of # of Status Flags
Instr Assembly Syntax Description
Mnemonic Words Cycles Affected
#

48 MPY MPY Multiply Wm by Wn to Accumulator 1 1 OA,OB,OAB,

Wm*Wn,Acc,Wx,Wxd,Wy,Wyd SA,SB,SAB
MPY Square Wm to Accumulator 1 1 OA,OB,OAB,
Wm*Wm,Acc,Wx,Wxd,Wy,Wyd SA,SB,SAB
49 MPY.N MPY.N -(Multiply Wm by Wn) to Accumulator 1 1 None
Wm*Wn,Acc,Wx,Wxd,Wy,Wyd
50 MSC MSC Wm*Wm,Acc,Wx,Wxd,Wy,Wyd Multiply and Subtract from Accumulator 1 1 OA,OB,OAB,
, SA,SB,SAB
AWB
51 MUL MUL.SS Wb,Ws,Wnd {Wnd + 1, Wnd} = signed(Wb) * signed(Ws) 1 1 None
MUL.SU Wb,Ws,Wnd {Wnd + 1, Wnd} = signed(Wb) * unsigned(Ws) 1 1 None
MUL.US Wb,Ws,Wnd {Wnd + 1, Wnd} = unsigned(Wb) * signed(Ws) 1 1 None
MUL.UU Wb,Ws,Wnd {Wnd + 1, Wnd} = unsigned(Wb) * 1 1 None
unsigned(Ws)
MUL.SU Wb,#lit5,Wnd {Wnd + 1, Wnd} = signed(Wb) * unsigned(lit5) 1 1 None
MUL.UU Wb,#lit5,Wnd {Wnd + 1, Wnd} = unsigned(Wb) * 1 1 None
unsigned(lit5)
MUL f W3:W2 = f * WREG 1 1 None
52 NEG NEG Acc Negate Accumulator 1 1 OA,OB,OAB,
SA,SB,SAB
NEG f f=f+1 1 1 C,DC,N,OV,Z
NEG f,WREG WREG = f + 1 1 1 C,DC,N,OV,Z
NEG Ws,Wd Wd = Ws + 1 1 1 C,DC,N,OV,Z
53 NOP NOP No Operation 1 1 None
NOPR No Operation 1 1 None
54 POP POP f Pop f from Top-of-Stack (TOS) 1 1 None
POP Wdo Pop from Top-of-Stack (TOS) to Wdo 1 1 None
POP.D Wnd Pop from Top-of-Stack (TOS) to 1 2 None
W(nd):W(nd + 1)
POP.S Pop Shadow Registers 1 1 All
55 PUSH PUSH f Push f to Top-of-Stack (TOS) 1 1 None
PUSH Wso Push Wso to Top-of-Stack (TOS) 1 1 None
PUSH.D Wns Push W(ns):W(ns + 1) to Top-of-Stack (TOS) 1 2 None
PUSH.S Push Shadow Registers 1 1 None
56 PWRSAV PWRSAV #lit1 Go into Sleep or Idle mode 1 1 WDTO,Sleep
57 RCALL RCALL Expr Relative Call 1 2 None
RCALL Wn Computed Call 1 2 None
58 REPEAT REPEAT #lit14 Repeat Next Instruction lit14 + 1 times 1 1 None
REPEAT Wn Repeat Next Instruction (Wn) + 1 times 1 1 None
59 RESET RESET Software device Reset 1 1 None
60 RETFIE RETFIE Return from interrupt 1 3 (2) None
61 RETLW RETLW #lit10,Wn Return with literal in Wn 1 3 (2) None
62 RETURN RETURN Return from Subroutine 1 3 (2) None
63 RLC RLC f f = Rotate Left through Carry f 1 1 C,N,Z
RLC f,WREG WREG = Rotate Left through Carry f 1 1 C,N,Z
RLC Ws,Wd Wd = Rotate Left through Carry Ws 1 1 C,N,Z
64 RLNC RLNC f f = Rotate Left (No Carry) f 1 1 N,Z
RLNC f,WREG WREG = Rotate Left (No Carry) f 1 1 N,Z
RLNC Ws,Wd Wd = Rotate Left (No Carry) Ws 1 1 N,Z
65 RRC RRC f f = Rotate Right through Carry f 1 1 C,N,Z
RRC f,WREG WREG = Rotate Right through Carry f 1 1 C,N,Z
RRC Ws,Wd Wd = Rotate Right through Carry Ws 1 1 C,N,Z

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 195

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 19-2: INSTRUCTION SET OVERVIEW (CONTINUED)

Base
Assembly # of # of Status Flags
Instr Assembly Syntax Description
Mnemonic Words Cycles Affected
#

66 RRNC RRNC f f = Rotate Right (No Carry) f 1 1 N,Z

RRNC f,WREG WREG = Rotate Right (No Carry) f 1 1 N,Z
RRNC Ws,Wd Wd = Rotate Right (No Carry) Ws 1 1 N,Z
67 SAC SAC Acc,#Slit4,Wdo Store Accumulator 1 1 None
SAC.R Acc,#Slit4,Wdo Store Rounded Accumulator 1 1 None
68 SE SE Ws,Wnd Wnd = sign-extended Ws 1 1 C,N,Z
69 SETM SETM f f = 0xFFFF 1 1 None
SETM WREG WREG = 0xFFFF 1 1 None
SETM Ws Ws = 0xFFFF 1 1 None
70 SFTAC SFTAC Acc,Wn Arithmetic Shift Accumulator by (Wn) 1 1 OA,OB,OAB,
SA,SB,SAB
SFTAC Acc,#Slit6 Arithmetic Shift Accumulator by Slit6 1 1 OA,OB,OAB,
SA,SB,SAB
71 SL SL f f = Left Shift f 1 1 C,N,OV,Z
SL f,WREG WREG = Left Shift f 1 1 C,N,OV,Z
SL Ws,Wd Wd = Left Shift Ws 1 1 C,N,OV,Z
SL Wb,Wns,Wnd Wnd = Left Shift Wb by Wns 1 1 N,Z
SL Wb,#lit5,Wnd Wnd = Left Shift Wb by lit5 1 1 N,Z
72 SUB SUB Acc Subtract Accumulators 1 1 OA,OB,OAB,
SA,SB,SAB
SUB f f = f - WREG 1 1 C,DC,N,OV,Z
SUB f,WREG WREG = f - WREG 1 1 C,DC,N,OV,Z
SUB #lit10,Wn Wn = Wn - lit10 1 1 C,DC,N,OV,Z
SUB Wb,Ws,Wd Wd = Wb - Ws 1 1 C,DC,N,OV,Z
SUB Wb,#lit5,Wd Wd = Wb - lit5 1 1 C,DC,N,OV,Z
73 SUBB SUBB f f = f - WREG - (C) 1 1 C,DC,N,OV,Z
SUBB f,WREG WREG = f - WREG - (C) 1 1 C,DC,N,OV,Z
SUBB #lit10,Wn Wn = Wn - lit10 - (C) 1 1 C,DC,N,OV,Z
SUBB Wb,Ws,Wd Wd = Wb - Ws - (C) 1 1 C,DC,N,OV,Z
SUBB Wb,#lit5,Wd Wd = Wb - lit5 - (C) 1 1 C,DC,N,OV,Z
74 SUBR SUBR f f = WREG - f 1 1 C,DC,N,OV,Z
SUBR f,WREG WREG = WREG - f 1 1 C,DC,N,OV,Z
SUBR Wb,Ws,Wd Wd = Ws - Wb 1 1 C,DC,N,OV,Z
SUBR Wb,#lit5,Wd Wd = lit5 - Wb 1 1 C,DC,N,OV,Z
75 SUBBR SUBBR f f = WREG - f - (C) 1 1 C,DC,N,OV,Z
SUBBR f,WREG WREG = WREG - f - (C) 1 1 C,DC,N,OV,Z
SUBBR Wb,Ws,Wd Wd = Ws - Wb - (C) 1 1 C,DC,N,OV,Z
SUBBR Wb,#lit5,Wd Wd = lit5 - Wb - (C) 1 1 C,DC,N,OV,Z
76 SWAP SWAP.b Wn Wn = nibble swap Wn 1 1 None
SWAP Wn Wn = byte swap Wn 1 1 None
77 TBLRDH TBLRDH Ws,Wd Read Prog<23:16> to Wd<7:0> 1 2 None
78 TBLRDL TBLRDL Ws,Wd Read Prog<15:0> to Wd 1 2 None
79 TBLWTH TBLWTH Ws,Wd Write Ws<7:0> to Prog<23:16> 1 2 None
80 TBLWTL TBLWTL Ws,Wd Write Ws to Prog<15:0> 1 2 None
81 ULNK ULNK Unlink Frame Pointer 1 1 None
82 XOR XOR f f = f .XOR. WREG 1 1 N,Z
XOR f,WREG WREG = f .XOR. WREG 1 1 N,Z
XOR #lit10,Wn Wd = lit10 .XOR. Wd 1 1 N,Z
XOR Wb,Ws,Wd Wd = Wb .XOR. Ws 1 1 N,Z
XOR Wb,#lit5,Wd Wd = Wb .XOR. lit5 1 1 N,Z
83 ZE ZE Ws,Wnd Wnd = Zero-extend Ws 1 1 C,Z,N

DS70290B-page 196 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

20.0 DEVELOPMENT SUPPORT 20.1 MPLAB Integrated Development

Environment Software
The PIC® microcontrollers are supported with a full
range of hardware and software development tools: The MPLAB IDE software brings an ease of software
• Integrated Development Environment development previously unseen in the 8/16-bit
microcontroller market. The MPLAB IDE is a Windows®
- MPLAB® IDE Software
operating system-based application that contains:
• Assemblers/Compilers/Linkers
• A single graphical interface to all debugging tools
- MPASMTM Assembler
- Simulator
- MPLAB C18 and MPLAB C30 C Compilers
- Programmer (sold separately)
- MPLINKTM Object Linker/
MPLIBTM Object Librarian - Emulator (sold separately)
- MPLAB ASM30 Assembler/Linker/Library - In-Circuit Debugger (sold separately)
• Simulators • A full-featured editor with color-coded context
- MPLAB SIM Software Simulator • A multiple project manager
• Emulators • Customizable data windows with direct edit of
contents
- MPLAB ICE 2000 In-Circuit Emulator
• High-level source code debugging
- MPLAB REAL ICE™ In-Circuit Emulator
• Visual device initializer for easy register
• In-Circuit Debugger
initialization
- MPLAB ICD 2
• Mouse over variable inspection
• Device Programmers
• Drag and drop variables from source to watch
- PICSTART® Plus Development Programmer windows
- MPLAB PM3 Device Programmer • Extensive on-line help
- PICkit™ 2 Development Programmer • Integration of select third party tools, such as
• Low-Cost Demonstration and Development HI-TECH Software C Compilers and IAR
Boards and Evaluation Kits C Compilers
The MPLAB IDE allows you to:
• Edit your source files (either assembly or C)
• One touch assemble (or compile) and download
to PIC MCU emulator and simulator tools
(automatically updates all project information)
• Debug using:
- Source files (assembly or C)
- Mixed assembly and C
- Machine code
MPLAB IDE supports multiple debugging tools in a
single development paradigm, from the cost-effective
simulators, through low-cost in-circuit debuggers, to
full-featured emulators. This eliminates the learning
curve when upgrading to tools with increased flexibility
and power.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 197

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

20.2 MPASM Assembler 20.5 MPLAB ASM30 Assembler, Linker

The MPASM Assembler is a full-featured, universal
and Librarian
macro assembler for all PIC MCUs. MPLAB ASM30 Assembler produces relocatable
The MPASM Assembler generates relocatable object machine code from symbolic assembly language for
files for the MPLINK Object Linker, Intel® standard HEX dsPIC30F devices. MPLAB C30 C Compiler uses the
files, MAP files to detail memory usage and symbol assembler to produce its object file. The assembler
reference, absolute LST files that contain source lines generates relocatable object files that can then be
and generated machine code and COFF files for archived or linked with other relocatable object files and
debugging. archives to create an executable file. Notable features
of the assembler include:
The MPASM Assembler features include:
• Support for the entire dsPIC30F instruction set
• Integration into MPLAB IDE projects
• Support for fixed-point and floating-point data
• User-defined macros to streamline
assembly code • Command line interface
• Conditional assembly for multi-purpose • Rich directive set
source files • Flexible macro language
• Directives that allow complete control over the • MPLAB IDE compatibility
assembly process
20.6 MPLAB SIM Software Simulator
20.3 MPLAB C18 and MPLAB C30 The MPLAB SIM Software Simulator allows code
C Compilers development in a PC-hosted environment by
The MPLAB C18 and MPLAB C30 Code Development simulating the PIC MCUs and dsPIC® DSCs on an
Systems are complete ANSI C compilers for instruction level. On any given instruction, the data
Microchip’s PIC18 and PIC24 families of areas can be examined or modified and stimuli can be
microcontrollers and the dsPIC30 and dsPIC33 family applied from a comprehensive stimulus controller.
of digital signal controllers. These compilers provide Registers can be logged to files for further run-time
powerful integration capabilities, superior code analysis. The trace buffer and logic analyzer display
optimization and ease of use not found with other extend the power of the simulator to record and track
compilers. program execution, actions on I/O, most peripherals
and internal registers.
For easy source level debugging, the compilers provide
symbol information that is optimized to the MPLAB IDE The MPLAB SIM Software Simulator fully supports
debugger. symbolic debugging using the MPLAB C18 and
MPLAB C30 C Compilers, and the MPASM and
MPLAB ASM30 Assemblers. The software simulator
20.4 MPLINK Object Linker/ offers the flexibility to develop and debug code outside
MPLIB Object Librarian of the hardware laboratory environment, making it an
The MPLINK Object Linker combines relocatable excellent, economical software development tool.
objects created by the MPASM Assembler and the
MPLAB C18 C Compiler. It can link relocatable objects
from precompiled libraries, using directives from a
linker script.
The MPLIB Object Librarian manages the creation and
modification of library files of precompiled code. When
a routine from a library is called from a source file, only
the modules that contain that routine will be linked in
with the application. This allows large libraries to be
used efficiently in many different applications.
The object linker/library features include:
• Efficient linking of single libraries instead of many
smaller files
• Enhanced code maintainability by grouping
related modules together
• Flexible creation of libraries with easy module
listing, replacement, deletion and extraction

DS70290B-page 198 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

20.7 MPLAB ICE 2000 20.9 MPLAB ICD 2 In-Circuit Debugger

High-Performance Microchip’s In-Circuit Debugger, MPLAB ICD 2, is a
In-Circuit Emulator powerful, low-cost, run-time development tool,
The MPLAB ICE 2000 In-Circuit Emulator is intended connecting to the host PC via an RS-232 or high-speed
to provide the product development engineer with a USB interface. This tool is based on the Flash PIC
complete microcontroller design tool set for PIC MCUs and can be used to develop for these and other
microcontrollers. Software control of the MPLAB ICE PIC MCUs and dsPIC DSCs. The MPLAB ICD 2 utilizes
2000 In-Circuit Emulator is advanced by the MPLAB the in-circuit debugging capability built into the Flash
Integrated Development Environment, which allows devices. This feature, along with Microchip’s In-Circuit
editing, building, downloading and source debugging Serial ProgrammingTM (ICSPTM) protocol, offers
from a single environment. cost-effective, in-circuit Flash debugging from the
graphical user interface of the MPLAB Integrated
The MPLAB ICE 2000 is a full-featured emulator Development Environment. This enables a designer to
system with enhanced trace, trigger and data develop and debug source code by setting breakpoints,
monitoring features. Interchangeable processor single stepping and watching variables, and CPU
modules allow the system to be easily reconfigured for status and peripheral registers. Running at full speed
emulation of different processors. The architecture of enables testing hardware and applications in real
the MPLAB ICE 2000 In-Circuit Emulator allows time. MPLAB ICD 2 also serves as a development
expansion to support new PIC microcontrollers. programmer for selected PIC devices.
The MPLAB ICE 2000 In-Circuit Emulator system has
been designed as a real-time emulation system with 20.10 MPLAB PM3 Device Programmer
advanced features that are typically found on more
expensive development tools. The PC platform and The MPLAB PM3 Device Programmer is a universal,
Microsoft® Windows® 32-bit operating system were CE compliant device programmer with programmable
chosen to best make these features available in a voltage verification at VDDMIN and VDDMAX for
simple, unified application. maximum reliability. It features a large LCD display
(128 x 64) for menus and error messages and a
modular, detachable socket assembly to support
20.8 MPLAB REAL ICE In-Circuit
various package types. The ICSP™ cable assembly is
Emulator System included as a standard item. In Stand-Alone mode, the
MPLAB REAL ICE In-Circuit Emulator System is MPLAB PM3 Device Programmer can read, verify and
Microchip’s next generation high-speed emulator for program PIC devices without a PC connection. It can
Microchip Flash DSC and MCU devices. It debugs and also set code protection in this mode. The MPLAB PM3
programs PIC® Flash MCUs and dsPIC® Flash DSCs connects to the host PC via an RS-232 or USB cable.
with the easy-to-use, powerful graphical user interface of The MPLAB PM3 has high-speed communications and
the MPLAB Integrated Development Environment (IDE), optimized algorithms for quick programming of large
included with each kit. memory devices and incorporates an SD/MMC card for
file storage and secure data applications.
The MPLAB REAL ICE probe is connected to the design
engineer’s PC using a high-speed USB 2.0 interface and
is connected to the target with either a connector
compatible with the popular MPLAB ICD 2 system
(RJ11) or with the new high-speed, noise tolerant,
Low-Voltage Differential Signal (LVDS) interconnection
(CAT5).
MPLAB REAL ICE is field upgradeable through future
firmware downloads in MPLAB IDE. In upcoming
releases of MPLAB IDE, new devices will be supported,
and new features will be added, such as software
breakpoints and assembly code trace. MPLAB REAL
ICE offers significant advantages over competitive
emulators including low-cost, full-speed emulation,
real-time variable watches, trace analysis, complex
breakpoints, a ruggedized probe interface and long (up
to three meters) interconnection cables.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 199

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

20.11 PICSTART Plus Development 20.13 Demonstration, Development and

Programmer Evaluation Boards
The PICSTART Plus Development Programmer is an A wide variety of demonstration, development and
easy-to-use, low-cost, prototype programmer. It evaluation boards for various PIC MCUs and dsPIC
connects to the PC via a COM (RS-232) port. MPLAB DSCs allows quick application development on fully
Integrated Development Environment software makes functional systems. Most boards include prototyping
using the programmer simple and efficient. The areas for adding custom circuitry and provide application
PICSTART Plus Development Programmer supports firmware and source code for examination and
most PIC devices in DIP packages up to 40 pins. modification.
Larger pin count devices, such as the PIC16C92X and The boards support a variety of features, including LEDs,
PIC17C76X, may be supported with an adapter socket. temperature sensors, switches, speakers, RS-232
The PICSTART Plus Development Programmer is CE interfaces, LCD displays, potentiometers and additional
compliant. EEPROM memory.
The demonstration and development boards can be
20.12 PICkit 2 Development Programmer
used in teaching environments, for prototyping custom
The PICkit™ 2 Development Programmer is a low-cost circuits and for learning about various microcontroller
programmer and selected Flash device debugger with applications.
an easy-to-use interface for programming many of In addition to the PICDEM™ and dsPICDEM™
Microchip’s baseline, mid-range and PIC18F families of demonstration/development board series of circuits,
Flash memory microcontrollers. The PICkit 2 Starter Kit Microchip has a line of evaluation kits and
includes a prototyping development board, twelve demonstration software for analog filter design,
sequential lessons, software and HI-TECH’s PICC™ KEELOQ® security ICs, CAN, IrDA®, PowerSmart
Lite C compiler, and is designed to help get up to speed battery management, SEEVAL® evaluation system,
quickly using PIC® microcontrollers. The kit provides Sigma-Delta ADC, flow rate sensing, plus many more.
everything needed to program, evaluate and develop
applications using Microchip’s powerful, mid-range Check the Microchip web page (www.microchip.com)
Flash memory family of microcontrollers. for the complete list of demonstration, development
and evaluation kits.

DS70290B-page 200 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

21.0 ELECTRICAL CHARACTERISTICS

This section provides an overview of dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 electrical characteristics.
Additional information will be provided in future revisions of this document as it becomes available.
Absolute maximum ratings for the dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 family are listed below. Exposure
to these maximum rating conditions for extended periods can affect device reliability. Functional operation of the device
at these or any other conditions above the parameters indicated in the operation listings of this specification is not
implied.

Absolute Maximum Ratings(1)

Ambient temperature under bias.............................................................................................................-40°C to +125°C
Storage temperature .............................................................................................................................. -65°C to +150°C
Voltage on VDD with respect to VSS ......................................................................................................... -0.3V to +4.0V
Voltage on any combined analog and digital pin and MCLR, with respect to VSS ......................... -0.3V to (VDD + 0.3V)
Voltage on any digital-only pin with respect to VSS .................................................................................. -0.3V to +5.6V
Voltage on VDDCORE with respect to VSS ................................................................................................ 2.25V to 2.75V
Maximum current out of VSS pin ...........................................................................................................................300 mA
Maximum current into VDD pin(2) ...........................................................................................................................250 mA
Maximum output current sunk by any I/O pin(3) ........................................................................................................4 mA
Maximum output current sourced by any I/O pin(3) ...................................................................................................4 mA
Maximum current sunk by all ports .......................................................................................................................200 mA
Maximum current sourced by all ports(2) ...............................................................................................................200 mA

Note 1: Stresses above those listed under “Absolute Maximum Ratings” can cause permanent damage to the
device. This is a stress rating only, and functional operation of the device at those or any other conditions
above those indicated in the operation listings of this specification is not implied. Exposure to maximum
rating conditions for extended periods can affect device reliability.
2: Maximum allowable current is a function of device maximum power dissipation (see Table 21-2).
3: Exceptions are CLKOUT, which is able to sink/source 25 mA, and the VREF+, VREF-, SCLx, SDAx, PGCx
and PGDx pins, which are able to sink/source 12 mA.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 201

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

21.1 DC Characteristics

TABLE 21-1: OPERATING MIPS VS. VOLTAGE

Max MIPS
VDD Range Temp Range
Characteristic dsPIC33FJ32GP202/204 and
(in Volts) (in °C)
dsPIC33FJ16GP304
3.0-3.6V -40°C to +85°C 40
3.0-3.6V -40°C to +125°C 40

TABLE 21-2: THERMAL OPERATING CONDITIONS

Rating Symbol Min Typ Max Unit
Industrial Temperature Devices
Operating Junction Temperature Range TJ -40 — +125 °C
Operating Ambient Temperature Range TA -40 — +85 °C
Extended Temperature Devices
Operating Junction Temperature Range TJ -40 — +140 °C
Operating Ambient Temperature Range TA -40 — +125 °C
Power Dissipation:
Internal chip power dissipation:
PINT = VDD x (IDD - Σ IOH) PD PINT + PI/O W
I/O Pin Power Dissipation:
I/O = Σ ({VDD - VOH} x IOH) + Σ (VOL x IOL)
Maximum Allowed Power Dissipation PDMAX (TJ - TA)/θJA W

TABLE 21-3: THERMAL PACKAGING CHARACTERISTICS

Characteristic Symbol Typ Max Unit Notes
Package Thermal Resistance, 44-pin QFN θJA 32 — °C/W 1
Package Thermal Resistance, 44-pin TFQP θJA 45 — °C/W 1
Package Thermal Resistance, 28-pin SPDIP θJA 45 — °C/W 1
Package Thermal Resistance, 28-pin SOIC θJA 50 — °C/W 1
Package Thermal Resistance, 28-pin QFN-S θJA 35 — °C/W 1
Note 1: Junction to ambient thermal resistance, Theta-JA (θJA) numbers are achieved by package simulations.

DS70290B-page 202 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 21-4: DC TEMPERATURE AND VOLTAGE SPECIFICATIONS

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
DC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symbol Characteristic Min Typ(1) Max Units Conditions
No.
Operating Voltage
DC10 Supply Voltage
VDD — 3.0 — 3.6 V Industrial and Extended
DC12 VDR (2)
RAM Data Retention Voltage 1.1 — 1.8 V —
DC16 VPOR VDD Start Voltage — — VSS V —
to ensure internal
Power-on Reset signal
DC17 SVDD VDD Rise Rate 0.03 — — V/ms 0-3.0V in 0.1s
to ensure internal
Power-on Reset signal
DC18 VCORE VDD Core(3) 2.25 — 2.75 V Voltage is dependent on
Internal regulator voltage load, temperature and
VDD
Note 1: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated.
2: This is the limit to which VDD can be lowered without losing RAM data.
3: These parameters are characterized but not tested in manufacturing.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 203

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
TABLE 21-5: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
DC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Parameter
Typical(1) Max Units Conditions
No.
Operating Current (IDD)(2)
DC20d 24 30 mA -40°C
DC20a 27 30 mA +25°C
3.3V 10 MIPS
DC20b 27 30 mA +85°C
DC20c 27 35 mA +125°C
DC21d 30 40 mA -40°C
DC21a 37 40 mA +25°C
3.3V 16 MIPS
DC21b 32 45 mA +85°C
DC21c 33 45 mA +125°C
DC22d 35 50 mA -40°C
DC22a 38 50 mA +25°C
3.3V 20 MIPS
DC22b 38 55 mA +85°C
DC22c 39 55 mA +125°C
DC23d 47 70 mA -40°C
DC23a 48 70 mA +25°C
3.3V 30 MIPS
DC23b 48 70 mA +85°C
DC23c 48 70 mA +125°C
DC24d 56 90 mA -40°C
DC24a 56 90 mA +25°C
3.3V 40 MIPS
DC24b 54 90 mA +85°C
DC24c 54 90 mA +125°C
Note 1: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O
pin loading and switching rate, oscillator type, internal code execution pattern and temperature, also have
an impact on the current consumption. The test conditions for all IDD measurements are as follows: OSC1
driven with external square wave from rail to rail. All I/O pins are configured as inputs and pulled to VSS.
MCLR = VDD, WDT and FSCM are disabled. CPU, SRAM, program memory and data memory are
operational. No peripheral modules are operating; however, every peripheral is being clocked (PMD bits
are all zeroed).

DS70290B-page 204 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 21-6: DC CHARACTERISTICS: IDLE CURRENT (IIDLE)

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
DC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Parameter
Typical(1) Max Units Conditions
No.
Idle Current (IIDLE): Core OFF Clock ON Base Current(2)
DC40d 3 25 mA -40°C
DC40a 3 25 mA +25°C
10 MIPS
DC40b 3 25 mA +85°C 3.3V
DC40c 3 25 mA +125°C
DC41d 4 25 mA -40°C
DC41a 4 25 mA +25°C
3.3V 16 MIPS
DC41b 5 25 mA +85°C
DC41c 5 25 mA +125°C
DC42d 6 25 mA -40°C
DC42a 6 25 mA +25°C
3.3V 20 MIPS
DC42b 7 25 mA +85°C
DC42c 7 25 mA +125°C
DC43d 9 25 mA -40°C
DC43a 9 25 mA +25°C
3.3V 30 MIPS
DC43b 9 25 mA +85°C
DC43c 9 25 mA +125°C
DC44d 10 25 mA -40°C
DC44a 10 25 mA +25°C
3.3V 40 MIPS
DC44b 16 25 mA +85°C
DC44c 10 25 mA +125°C
Note 1: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated.
2: Base IIDLE current is measured with core off, clock on and all modules turned off. Peripheral Module
Disable SFR registers are zeroed. All I/O pins are configured as inputs and pulled to VSS.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 205

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 21-7: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
DC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Parameter
Typical(1) Max Units Conditions
No.
Power-Down Current (IPD)(2)
DC60d 55 500 μA -40°C
DC60a 63 500 μA +25°C
3.3V Base Power-Down Current(3,4)
DC60b 85 500 μA +85°C
DC60c 146 1 mA +125°C
DC61d 8 12 μA -40°C
DC61a 10 15 μA +25°C
3.3V Watchdog Timer Current: ΔIWDT(3)
DC61b 12 20 μA +85°C
DC61c 13 25 μA +125°C
Note 1: Data in the Typical column is at 3.3V, 25°C unless otherwise stated.
2: Base IPD is measured with all peripherals and clocks shut down. All I/Os are configured as inputs and
pulled to VSS. WDT, etc., are all switched off, and VREGS (RCON<8>) = 1.
3: The Δ current is the additional current consumed when the module is enabled. This current should be
added to the base IPD current.
4: These currents are measured on the device containing the most memory in this family.

TABLE 21-8: DC CHARACTERISTICS: DOZE CURRENT (IDOZE)

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
DC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Doze
Parameter No. Typical(1) Max Units Conditions
Ratio
DC73a 25 32 1:2 mA
DC73f 23 27 1:64 mA -40°C 3.3V 40 MIPS
DC73g 23 26 1:128 mA
DC70a 42 47 1:2 mA
DC70f 26 27 1:64 mA +25°C 3.3V 40 MIPS
DC70g 25 27 1:128 mA
DC71a 41 48 1:2 mA
DC71f 25 28 1:64 mA +85°C 3.3V 40 MIPS
DC71g 24 28 1:128 mA
DC72a 42 49 1:2 mA
DC72f 26 29 1:64 mA +125°C 3.3V 40 MIPS
DC72g 25 28 1:128 mA
Note 1: Data in the Typical column is at 3.3V, 25°C unless otherwise stated.

DS70290B-page 206 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 21-9: DC CHARACTERISTICS: I/O PIN INPUT SPECIFICATIONS

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
DC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symbol Characteristic Min Typ(1) Max Units Conditions
No.
VIL Input Low Voltage
DI10 I/O pins VSS — 0.2 VDD V
DI15 MCLR VSS — 0.2 VDD V
DI16 OSC1 (XT mode) VSS — 0.2 VDD V
DI17 OSC1 (HS mode) VSS — 0.2 VDD V
DI18 SDAx, SCLx VSS — 0.3 VDD V SMbus disabled
DI19 SDAx, SCLx VSS — 0.2 VDD V SMbus enabled
VIH Input High Voltage
DI20 I/O pins:
with analog functions(4) 0.8 VDD — VDD V
digital-only(4) 0.8 VDD — 5.5 V
DI25 MCLR 0.8 VDD — VDD V
DI26 OSC1 (XT mode) 0.7 VDD — VDD V
DI27 OSC1 (HS mode) 0.7 VDD — VDD V
DI28 SDAx, SCLx 0.7 VDD — VDD V SMbus disabled
DI29 SDAx, SCLx 0.8 VDD — VDD V SMbus enabled
ICNPU CNx Pull-up Current
DI30 50 250 400 μA VDD = 3.3V, VPIN = VSS
IIL Input Leakage Current(2)(3)
DI50 I/O ports — — ±2 μA VSS ≤ VPIN ≤ VDD,
Pin at high-impedance
DI51 Analog Input Pins — — ±1 μA VSS ≤ VPIN ≤ VDD, Pin at
high-impedance,
40°C ≤ TA ≤ +85°C
DI51a Analog Input Pins — — ±2 μA Analog pins shared with
external reference pins,
40°C ≤ TA ≤ +85°C
DI51b Analog Input Pins — — ±3.5 μA VSS ≤ VPIN ≤ VDD, Pin at
high-impedance,
-40°C ≤ TA ≤ +125°C
DI51c Analog Input Pins — — ±8 μA Analog pins shared with
external reference pins,
-40°C ≤ TA ≤ +125°C
DI55 MCLR — — ±2 μA VSS ≤ VPIN ≤ VDD
DI56 OSC1 — — ±2 μA VSS ≤ VPIN ≤ VDD,
XT and HS modes
Note 1: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated.
2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltages.
3: Negative current is defined as current sourced by the pin.
4: See Table 9-1 for a list of digital-only and analog pins.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 207

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 21-10: DC CHARACTERISTICS: I/O PIN OUTPUT SPECIFICATIONS

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
DC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symbol Characteristic Min Typ Max Units Conditions
No.
VOL Output Low Voltage
DO10 I/O ports — — 0.4 V IOL = 2mA, VDD = 3.3V
DO16 OSC2/CLKO — — 0.4 V IOL = 2mA, VDD = 3.3V
VOH Output High Voltage
DO20 I/O ports 2.40 — — V IOH = -2.3 mA, VDD = 3.3V
DO26 OSC2/CLKO 2.41 — — V IOH = -1.3 mA, VDD = 3.3V

TABLE 21-11: ELECTRICAL CHARACTERISTICS: BOR

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
DC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symbol Characteristic Min(1) Typ Max Units Conditions
No.
BO10 VBOR BOR Event on VDD transition 2.40 — 2.55 V —
high-to-low
BOR event is tied to VDD core voltage
decrease
Note 1: Parameters are for design guidance only and are not tested in manufacturing.

DS70290B-page 208 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 21-12: DC CHARACTERISTICS: PROGRAM MEMORY

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
DC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symbol Characteristic Min Typ(1) Max Units Conditions
No.
Program Flash Memory
D130 EP Cell Endurance 10,000 — — E/W -40°C to +125°C
D131 VPR VDD for Read VMIN — 3.6 V VMIN = Minimum operating
voltage
D132B VPEW VDD for Self-Timed Write VMIN — 3.6 V VMIN = Minimum operating
voltage
D134 TRETD Characteristic Retention 20 — — Year Provided no other specifications
are violated, -40°C to +125°C
D135 IDDP Supply Current during — 10 — mA
Programming
D136a TRW Row Write Time 1.32 — 1.74 ms TRW = 11064 FRC cycles,
TA = +85°C, See Note 2
D136b TRW Row Write Time 1.28 — 1.79 ms TRW = 11064 FRC cycles,
TA = +125°C, See Note 2
D137a TPE Page Erase Time 20.1 — 26.5 ms TPE = 168517 FRC cycles,
TA = +85°C, See Note 2
D137b TPE Page Erase Time 19.5 — 27.3 ms TPE = 168517 FRC cycles,
TA = +125°C, See Note 2
D138a TWW Word Write Cycle Time 42.3 — 55.9 μs TWW = 355 FRC cycles,
TA = +85°C, See Note 2
D138b TWW Word Write Cycle Time 41.1 — 57.6 μs TWW = 355 FRC cycles,
TA = +125°C, See Note 2
Note 1: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated.
2: Other conditions: FRC = 7.37 MHz, TUN<5:0> = b'011111 (for Min), TUN<5:0> = b'100000 (for Max).
This parameter depends on the FRC accuracy (see Table 21-18) and the value of the FRC Oscillator Tun-
ing register (see Register 7-4). For complete details on calculating the Minimum and Maximum time see
Section 4.3 “Programming Operations”.

TABLE 21-13: INTERNAL VOLTAGE REGULATOR SPECIFICATIONS

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symbol Characteristics Min Typ Max Units Comments
No.
CEFC External Filter Capacitor 1 10 — μF Capacitor must be low
Value series resistance
(< 5 ohms)

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 209

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

21.2 AC Characteristics and Timing

Parameters
The information contained in this section defines
dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 AC
characteristics and timing parameters.

TABLE 21-14: TEMPERATURE AND VOLTAGE SPECIFICATIONS – AC

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
AC CHARACTERISTICS
-40°C ≤ TA ≤ +125°C for Extended
Operating voltage VDD range as described in Section 21.0 “Electrical
Characteristics”.

FIGURE 21-1: LOAD CONDITIONS FOR DEVICE TIMING SPECIFICATIONS

Load Condition 1 – for all pins except OSC2 Load Condition 2 – for OSC2

VDD/2

RL Pin CL

VSS
CL
Pin RL = 464Ω
CL = 50 pF for all pins except OSC2
VSS 15 pF for OSC2 output

TABLE 21-15: CAPACITIVE LOADING REQUIREMENTS ON OUTPUT PINS

Param
Symbol Characteristic Min Typ Max Units Conditions
No.
DO50 COSC2 OSC2/SOSC2 pin — — 15 pF In XT and HS modes when
external clock is used to drive
OSC1
DO56 CIO All I/O pins and OSC2 — — 50 pF EC mode
DO58 CB SCLx, SDAx — — 400 pF In I2C™ mode

DS70290B-page 210 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

FIGURE 21-2: EXTERNAL CLOCK TIMING

Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4

OSC1
OS20
OS30 OS30 OS31 OS31
OS25
CLKO

OS41 OS40

TABLE 21-16: EXTERNAL CLOCK TIMING REQUIREMENTS

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
AC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symb Characteristic Min Typ(1) Max Units Conditions
No.
OS10 FIN External CLKI Frequency DC — 40 MHz EC
(External clocks allowed only
in EC and ECPLL modes)
Oscillator Crystal Frequency 3.5 — 10 MHz XT
10 — 40 MHz HS
— 33 kHz SOSC
OS20 TOSC TOSC = 1/FOSC 12.5 — DC ns —
OS25 TCY Instruction Cycle Time(2) 25 — DC ns —
OS30 TosL, External Clock in (OSC1) 0.375 x TOSC — 0.625 x TOSC ns EC
TosH High or Low Time
OS31 TosR, External Clock in (OSC1) — — 20 ns EC
TosF Rise or Fall Time
OS40 TckR CLKO Rise Time(3) — 5.2 — ns —
OS41 TckF CLKO Fall Time(3) — 5.2 — ns —
Note 1: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated.
2: Instruction cycle period (TCY) equals two times the input oscillator time-base period. All specified values
are based on characterization data for that particular oscillator type under standard operating conditions
with the device executing code. Exceeding these specified limits can result in an unstable oscillator
operation and/or higher than expected current consumption. All devices are tested to operate at “min.”
values with an external clock applied to the OSC1/CLKI pin. When an external clock input is used, the
“max.” cycle time limit is “DC” (no clock) for all devices.
3: Measurements are taken in EC mode. The CLKO signal is measured on the OSC2 pin.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 211

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 21-17: PLL CLOCK TIMING SPECIFICATIONS (VDD = 3.0V TO 3.6V)

Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated)
AC CHARACTERISTICS Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symbol Characteristic Min Typ(1) Max Units Conditions
No.
OS50 FPLLI PLL Voltage Controlled 0.8 — 8 MHz ECPLL, XTPLL modes
Oscillator (VCO) Input
Frequency Range
OS51 FSYS On-Chip VCO System 100 — 200 MHz —
Frequency
OS52 TLOCK PLL Start-up Time (Lock Time) 0.9 1.5 3.1 ms —
OS53 DCLK CLKO Stability (Jitter) -3 0.5 3 % Measured over 100 ms
period
Note 1: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated.

TABLE 21-18: AC CHARACTERISTICS: INTERNAL RC ACCURACY

Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated)
AC CHARACTERISTICS Operating temperature -40°C ≤ TA ≤ +85°C for industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Characteristic Min Typ Max Units Conditions
No.

Internal FRC Accuracy @ FRC Frequency = 7.37 MHz(1,2)

F20 FRC -2 — +2 % -40°C ≤ TA ≤ +85°C VDD = 3.0-3.6V
FRC -5 — +5 % -40°C ≤ TA ≤ +125°C VDD = 3.0-3.6V
Note 1: Frequency calibrated at 25°C and 3.3V. TUN bits can be used to compensate for temperature drift.
2: FRC is set to initial frequency of 7.37 MHz (±2%) at 25°C.

TABLE 21-19: INTERNAL RC ACCURACY

Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated)
AC CHARACTERISTICS Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Characteristic Min Typ Max Units Conditions
No.
LPRC @ 32.768 kHz(1,2)
F21 LPRC -20 ±6 +20 % -40°C ≤ TA ≤ +85°C VDD = 3.0-3.6V
LPRC -70 — +70 % -40°C ≤ TA ≤ +125°C VDD = 3.0-3.6V
Note 1: Change of LPRC frequency as VDD changes.
2: LPRC impacts the Watchdog Timer Time-out Period (TWDT1). See Section 18.4 “Watchdog Timer
(WDT)” for more information.

DS70290B-page 212 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

FIGURE 21-3: I/O TIMING CHARACTERISTICS

I/O Pin
(Input)

DI35
DI40

I/O Pin Old Value New Value

(Output)
DO31
DO32

Note: Refer to Figure 21-1 for load conditions.

TABLE 21-20: I/O TIMING REQUIREMENTS

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
AC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symbol Characteristic Min Typ(1) Max Units Conditions
No.
DO31 TIOR Port Output Rise Time — 10 25 ns —
DO32 TIOF Port Output Fall Time — 10 25 ns —
DI35 TINP INTx Pin High or Low Time (output) 20 — — ns —
DI40 TRBP CNx High or Low Time (input) 2 — — TCY —
Note 1: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 213

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

FIGURE 21-4: RESET, WATCHDOG TIMER, OSCILLATOR START-UP TIMER AND POWER-UP
TIMER TIMING CHARACTERISTICS

VDD SY12

MCLR

Internal SY10
POR

SY11
PWRT
Time-out
SY30
OSC
Time-out

Internal
Reset

Watchdog
Timer
Reset
SY20
SY13
SY13

I/O Pins

SY35
FSCM
Delay

Note: Refer to Figure 21-1 for load conditions.

DS70290B-page 214 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 21-21: RESET, WATCHDOG TIMER, OSCILLATOR START-UP TIMER, POWER-UP TIMER
TIMING REQUIREMENTS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
AC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symbol Characteristic(1) Min Typ(2) Max Units Conditions
No.
SY10 TMCL MCLR Pulse-Width (low) 2 — — μs -40°C to +85°C
SY11 TPWRT Power-up Timer Period — 2 — ms -40°C to +85°C
4 User programmable
8
16
32
64
128
SY12 TPOR Power-on Reset Delay 3 10 30 μs -40°C to +85°C
SY13 TIOZ I/O High-Impedance from MCLR 0.68 0.72 1.2 μs —
Low or Watchdog Timer Reset
SY20 TWDT1 Watchdog Timer Time-out Period — — — ms See Section 18.4
(No Prescaler) “Watchdog Timer (WDT)”
and LPRC parameter F21
(Table 21-19).
SY30 TOST Oscillator Start-up Time — 1024 — — TOSC = OSC1 period
TOSC
SY35 TFSCM Fail-Safe Clock Monitor Delay — 500 900 μs -40°C to +85°C
Note 1: These parameters are characterized but not tested in manufacturing.
2: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 215

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

FIGURE 21-5: TIMER1, 2 AND 3 EXTERNAL CLOCK TIMING CHARACTERISTICS

TxCK

Tx10 Tx11

Tx15 Tx20
OS60
TMRx

Note: Refer to Figure 21-1 for load conditions.

TABLE 21-22: TIMER1 EXTERNAL CLOCK TIMING REQUIREMENTS(1)

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
AC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symbol Characteristic Min Typ Max Units Conditions
No.
TA10 TTXH TxCK High Time Synchronous, 0.5 TCY + 20 — — ns Must also meet
no prescaler parameter TA15
Synchronous, 10 — — ns
with prescaler
Asynchronous 10 — — ns
TA11 TTXL TxCK Low Time Synchronous, 0.5 TCY + 20 — — ns Must also meet
no prescaler parameter TA15
Synchronous, 10 — — ns
with prescaler
Asynchronous 10 — — ns
TA15 TTXP TxCK Input Period Synchronous, TCY + 40 — — ns —
no prescaler
Synchronous, Greater of: — — — N = prescale
with prescaler 20 ns or value
(TCY + 40)/N (1, 8, 64, 256)
Asynchronous 20 — — ns —
OS60 Ft1 SOSC1/T1CK Oscillator Input DC — 50 kHz —
frequency Range (oscillator enabled
by setting bit TCS (T1CON<1>))
TA20 TCKEXTMRL Delay from External TxCK Clock 0.5 TCY — 1.5 TCY — —
Edge to Timer Increment
Note 1: Timer1 is a Type A.

DS70290B-page 216 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 21-23: TIMER2 EXTERNAL CLOCK TIMING REQUIREMENTS

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
AC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symbol Characteristic Min Typ Max Units Conditions
No.
TB10 TtxH TxCK High Time Synchronous, 0.5 TCY + 20 — — ns Must also meet
no prescaler parameter TB15
Synchronous, 10 — — ns
with prescaler
TB11 TtxL TxCK Low Time Synchronous, 0.5 TCY + 20 — — ns Must also meet
no prescaler parameter TB15
Synchronous, 10 — — ns
with prescaler
TB15 TtxP TxCK Input Synchronous, TCY + 40 — — ns N = prescale
Period no prescaler value
Synchronous, Greater of: (1, 8, 64, 256)
with prescaler 20 ns or
(TCY + 40)/N
TB20 TCKEXTMRL Delay from External TxCK Clock 0.5 TCY — 1.5 TCY — —
Edge to Timer Increment

TABLE 21-24: TIMER3 EXTERNAL CLOCK TIMING REQUIREMENTS

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
AC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symbol Characteristic Min Typ Max Units Conditions
No.
TC10 TtxH TxCK High Time Synchronous 0.5 TCY + 20 — — ns Must also meet
parameter TC15
TC11 TtxL TxCK Low Time Synchronous 0.5 TCY + 20 — — ns Must also meet
parameter TC15
TC15 TtxP TxCK Input Period Synchronous, TCY + 40 — — ns N = prescale
no prescaler value
Synchronous, Greater of: (1, 8, 64, 256)
with prescaler 20 ns or
(TCY + 40)/N
TC20 TCKEXTMRL Delay from External TxCK Clock 0.5 TCY — 1.5 — —
Edge to Timer Increment TCY

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 217

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

FIGURE 21-6: INPUT CAPTURE (CAPx) TIMING CHARACTERISTICS

ICx

IC10 IC11
IC15

Note: Refer to Figure 21-1 for load conditions.

TABLE 21-25: INPUT CAPTURE TIMING REQUIREMENTS

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
AC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symbol Characteristic(1) Min Max Units Conditions
No.
IC10 TccL ICx Input Low Time No Prescaler 0.5 TCY + 20 — ns —
With Prescaler 10 — ns
IC11 TccH ICx Input High Time No Prescaler 0.5 TCY + 20 — ns —
With Prescaler 10 — ns
IC15 TccP ICx Input Period (TCY + 40)/N — ns N = prescale
value (1, 4, 16)
Note 1: These parameters are characterized but not tested in manufacturing.

FIGURE 21-7: OUTPUT COMPARE MODULE (OCx) TIMING CHARACTERISTICS

OCx
(Output Compare
or PWM Mode) OC11 OC10

Note: Refer to Figure 21-1 for load conditions.

TABLE 21-26: OUTPUT COMPARE MODULE TIMING REQUIREMENTS

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
AC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symbol Characteristic(1) Min Typ Max Units Conditions
No.
OC10 TccF OCx Output Fall Time — — — ns See parameter D032
OC11 TccR OCx Output Rise Time — — — ns See parameter D031
Note 1: These parameters are characterized but not tested in manufacturing.

DS70290B-page 218 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

FIGURE 21-8: OC/PWM MODULE TIMING CHARACTERISTICS

OC20

OCFA/OCFB

OC15

OCx

TABLE 21-27: SIMPLE OC/PWM MODE TIMING REQUIREMENTS

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
AC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symbol Characteristic(1) Min Typ Max Units Conditions
No.
OC15 TFD Fault Input to PWM I/O — — 50 ns —
Change
OC20 TFLT Fault Input Pulse-Width 50 — — ns —
Note 1: These parameters are characterized but not tested in manufacturing.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 219

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

FIGURE 21-9: SPIx MODULE MASTER MODE (CKE = 0) TIMING CHARACTERISTICS

SCKx
(CKP = 0)

SP11 SP10 SP21 SP20

SCKx
(CKP = 1)

SP35 SP20 SP21

SDOx MSb Bit 14 - - - - - -1 LSb

SP31 SP30

SDIx MSb In Bit 14 - - - -1 LSb In

SP40 SP41

Note: Refer to Figure 21-1 for load conditions.

TABLE 21-28: SPIx MASTER MODE (CKE = 0) TIMING REQUIREMENTS

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
AC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symbol Characteristic(1) Min Typ(2) Max Units Conditions
No.
SP10 TscL SCKx Output Low Time TCY/2 — — ns See Note 3
SP11 TscH SCKx Output High Time TCY/2 — — ns See Note 3
SP20 TscF SCKx Output Fall Time — — — ns See parameter D032
and Note 4
SP21 TscR SCKx Output Rise Time — — — ns See parameter D031
and Note 4
SP30 TdoF SDOx Data Output Fall Time — — — ns See parameter D032
and Note 4
SP31 TdoR SDOx Data Output Rise Time — — — ns See parameter D031
and Note 4
SP35 TscH2doV, SDOx Data Output Valid after — 6 20 ns —
TscL2doV SCKx Edge
SP40 TdiV2scH, Setup Time of SDIx Data Input 23 — — ns —
TdiV2scL to SCKx Edge
SP41 TscH2diL, Hold Time of SDIx Data Input 30 — — ns —
TscL2diL to SCKx Edge
Note 1: These parameters are characterized but not tested in manufacturing.
2: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated.
3: The minimum clock period for SCKx is 100 ns. Therefore, the clock generated in Master mode must not
violate this specification.
4: Assumes 50 pF load on all SPIx pins.

DS70290B-page 220 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

FIGURE 21-10: SPIx MODULE MASTER MODE (CKE = 1) TIMING CHARACTERISTICS

SP36
SCKX
(CKP = 0)

SP11 SP10 SP21 SP20

SCKX
(CKP = 1)
SP35
SP20 SP21

SDOX MSb Bit 14 - - - - - -1 LSb

SP40 SP30,SP31

SDIX MSb In Bit 14 - - - -1 LSb In

SP41

Note: Refer to Figure 21-1 for load conditions.

TABLE 21-29: SPIx MODULE MASTER MODE (CKE = 1) TIMING REQUIREMENTS

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
AC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symbol Characteristic(1) Min Typ(2) Max Units Conditions
No.
SP10 TscL SCKx Output Low Time TCY/2 — — ns See Note 3
SP11 TscH SCKx Output High Time TCY/2 — — ns See Note 3
SP20 TscF SCKx Output Fall Time — — — ns See parameter D032
and Note 4
SP21 TscR SCKx Output Rise Time — — — ns See parameter D031
and Note 4
SP30 TdoF SDOx Data Output Fall Time — — — ns See parameter D032
and Note 4
SP31 TdoR SDOx Data Output Rise Time — — — ns See parameter D031
and Note 4
SP35 TscH2doV, SDOx Data Output Valid after — 6 20 ns —
TscL2doV SCKx Edge
SP36 TdoV2sc, SDOx Data Output Setup to 30 — — ns —
TdoV2scL First SCKx Edge
SP40 TdiV2scH, Setup Time of SDIx Data 23 — — ns —
TdiV2scL Input to SCKx Edge
SP41 TscH2diL, Hold Time of SDIx Data Input 30 — — ns —
TscL2diL to SCKx Edge
Note 1: These parameters are characterized but not tested in manufacturing.
2: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated.
3: The minimum clock period for SCKx is 100 ns. The clock generated in Master mode must not violate this
specification.
4: Assumes 50 pF load on all SPIx pins.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 221

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
FIGURE 21-11: SPIx MODULE SLAVE MODE (CKE = 0) TIMING CHARACTERISTICS

SSX

SP50 SP52

SCKX
(CKP = 0)

SP71 SP70
SP73 SP72

SCKX
(CKP = 1)

SP72 SP73
SP35

SDOX MSb Bit 14 - - - - - -1 LSb

SP30,SP31 SP51
SDIX MSb In Bit 14 - - - -1 LSb In

SP41
SP40
Note: Refer to Figure 21-1 for load conditions.

TABLE 21-30: SPIx MODULE SLAVE MODE (CKE = 0) TIMING REQUIREMENTS

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
AC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symbol Characteristic(1) Min Typ(2) Max Units Conditions
No.
SP70 TscL SCKx Input Low Time 30 — — ns —
SP71 TscH SCKx Input High Time 30 — — ns —
SP72 TscF SCKx Input Fall Time — 10 25 ns See Note 3
SP73 TscR SCKx Input Rise Time — 10 25 ns See Note 3
SP30 TdoF SDOx Data Output Fall Time — — — ns See parameter D032
and Note 3
SP31 TdoR SDOx Data Output Rise Time — — — ns See parameter D031
and Note 3
SP35 TscH2doV, SDOx Data Output Valid after — — 30 ns —
TscL2doV SCKx Edge
SP40 TdiV2scH, Setup Time of SDIx Data Input 20 — — ns —
TdiV2scL to SCKx Edge
SP41 TscH2diL, Hold Time of SDIx Data Input to 20 — — ns —
TscL2diL SCKx Edge
SP50 TssL2scH, SSx ↓ to SCKx ↑ or SCKx Input 120 — — ns —
TssL2scL
SP51 TssH2doZ SSx ↑ to SDOx Output 10 — 50 ns See Note 3
High-Impedance
SP52 TscH2ssH SSx after SCKx Edge 1.5 TCY +40 — — ns —
TscL2ssH
Note 1: These parameters are characterized but not tested in manufacturing.
2: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated.
3: Assumes 50 pF load on all SPIx pins.

DS70290B-page 222 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

FIGURE 21-12: SPIx MODULE SLAVE MODE (CKE = 1) TIMING CHARACTERISTICS

SP60
SSx

SP50 SP52
SCKx
(CKP = 0)

SP71 SP70 SP73 SP72

SCKx
(CKP = 1)
SP35
SP72 SP73
SP52

SDOx MSb Bit 14 - - - - - -1 LSb

SP30,SP31 SP51

SDI
SDIx
MSb In Bit 14 - - - -1 LSb In
SP41
SP40

Note: Refer to Figure 21-1 for load conditions.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 223

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 21-31: SPIx MODULE SLAVE MODE (CKE = 1) TIMING REQUIREMENTS

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
AC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symbol Characteristic(1) Min Typ(2) Max Units Conditions
No.
SP70 TscL SCKx Input Low Time 30 — — ns —
SP71 TscH SCKx Input High Time 30 — — ns —
SP72 TscF SCKx Input Fall Time — 10 25 ns See Note 3
SP73 TscR SCKx Input Rise Time — 10 25 ns See Note 3
SP30 TdoF SDOx Data Output Fall Time — — — ns See parameter D032
and Note 3
SP31 TdoR SDOx Data Output Rise Time — — — ns See parameter D031
and Note 3
SP35 TscH2doV, SDOx Data Output Valid after — — 30 ns —
TscL2doV SCKx Edge
SP40 TdiV2scH, Setup Time of SDIx Data Input 20 — — ns —
TdiV2scL to SCKx Edge
SP41 TscH2diL, Hold Time of SDIx Data Input 20 — — ns —
TscL2diL to SCKx Edge
SP50 TssL2scH, SSx ↓ to SCKx ↓ or SCKx ↑ 120 — — ns —
TssL2scL Input
SP51 TssH2doZ SSx ↑ to SDOX Output 10 — 50 ns See Note 4
High-Impedance
SP52 TscH2ssH SSx ↑ after SCKx Edge 1.5 TCY + 40 — — ns —
TscL2ssH
SP60 TssL2doV SDOx Data Output Valid after — — 50 ns —
SSx Edge
Note 1: These parameters are characterized but not tested in manufacturing.
2: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated.
3: The minimum clock period for SCKx is 100 ns. The clock generated in Master mode must not violate this
specification.
4: Assumes 50 pF load on all SPIx pins.

DS70290B-page 224 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

FIGURE 21-13: I2Cx BUS START/STOP BITS TIMING CHARACTERISTICS (MASTER MODE)

SCLx
IM31 IM34
IM30 IM33

SDAx

Start Stop
Condition Condition

Note: Refer to Figure 21-1 for load conditions.

FIGURE 21-14: I2Cx BUS DATA TIMING CHARACTERISTICS (MASTER MODE)

IM20 IM11 IM21

IM10
SCLx
IM11 IM26
IM10 IM25 IM33
SDAx
In
IM40 IM40 IM45

SDAx
Out

Note: Refer to Figure 21-1 for load conditions.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 225

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 21-32: I2Cx BUS DATA TIMING REQUIREMENTS (MASTER MODE)

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
AC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symbol Characteristic Min(1) Max Units Conditions
No.
IM10 TLO:SCL Clock Low Time 100 kHz mode TCY/2 (BRG + 1) — μs —
400 kHz mode TCY/2 (BRG + 1) — μs —
1 MHz mode(2) TCY/2 (BRG + 1) — μs —
IM11 THI:SCL Clock High Time 100 kHz mode TCY/2 (BRG + 1) — μs —
400 kHz mode TCY/2 (BRG + 1) — μs —
1 MHz mode(2) TCY/2 (BRG + 1) — μs —
IM20 TF:SCL SDAx and SCLx 100 kHz mode — 300 ns CB is specified to be
Fall Time 400 kHz mode 20 + 0.1 CB 300 ns from 10 to 400 pF
1 MHz mode(2) — 100 ns
IM21 TR:SCL SDAx and SCLx 100 kHz mode — 1000 ns CB is specified to be
Rise Time 400 kHz mode 20 + 0.1 CB 300 ns from 10 to 400 pF
1 MHz mode(2) — 300 ns
IM25 TSU:DAT Data Input 100 kHz mode 250 — ns —
Setup Time 400 kHz mode 100 — ns
1 MHz mode(2) 40 — ns
IM26 THD:DAT Data Input 100 kHz mode 0 — μs —
Hold Time 400 kHz mode 0 0.9 μs
1 MHz mode(2) 0.2 — μs
IM30 TSU:STA Start Condition 100 kHz mode TCY/2 (BRG + 1) — μs Only relevant for
Setup Time 400 kHz mode TCY/2 (BRG + 1) — μs Repeated Start
condition
1 MHz mode(2) TCY/2 (BRG + 1) — μs
IM31 THD:STA Start Condition 100 kHz mode TCY/2 (BRG + 1) — μs After this period the
Hold Time 400 kHz mode TCY/2 (BRG + 1) — μs first clock pulse is
generated
1 MHz mode(2) TCY/2 (BRG + 1) — μs
IM33 TSU:STO Stop Condition 100 kHz mode TCY/2 (BRG + 1) — μs —
Setup Time 400 kHz mode TCY/2 (BRG + 1) — μs
1 MHz mode(2) TCY/2 (BRG + 1) — μs
IM34 THD:STO Stop Condition 100 kHz mode TCY/2 (BRG + 1) — ns —
Hold Time 400 kHz mode TCY/2 (BRG + 1) — ns
1 MHz mode(2) TCY/2 (BRG + 1) — ns
IM40 TAA:SCL Output Valid 100 kHz mode — 3500 ns —
From Clock 400 kHz mode — 1000 ns —
1 MHz mode(2) — 400 ns —
IM45 TBF:SDA Bus Free Time 100 kHz mode 4.7 — μs Time the bus must be
400 kHz mode 1.3 — μs free before a new
transmission can start
1 MHz mode(2) 0.5 — μs
IM50 CB Bus Capacitive Loading — 400 pF —
Note 1: BRG is the value of the I2C Baud Rate Generator. Refer to Section 19. “Inter-Integrated Circuit (I2C™)”
in the “dsPIC33F Family Reference Manual”.
2: Maximum pin capacitance = 10 pF for all I2Cx pins (for 1 MHz mode only).

DS70290B-page 226 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

FIGURE 21-15: I2Cx BUS START/STOP BITS TIMING CHARACTERISTICS (SLAVE MODE)

SCLx
IS31 IS34
IS30 IS33

SDAx

Start Stop
Condition Condition

FIGURE 21-16: I2Cx BUS DATA TIMING CHARACTERISTICS (SLAVE MODE)

IS20 IS11 IS21

IS10
SCLx
IS30 IS26
IS31 IS25 IS33
SDAx
In
IS40 IS40 IS45

SDAx
Out

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 227

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 21-33: I2Cx BUS DATA TIMING REQUIREMENTS (SLAVE MODE)

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
AC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param Symbol Characteristic Min Max Units Conditions
IS10 TLO:SCL Clock Low Time 100 kHz mode 4.7 — μs Device must operate at a
minimum of 1.5 MHz
400 kHz mode 1.3 — μs Device must operate at a
minimum of 10 MHz
1 MHz mode(1) 0.5 — μs —
IS11 THI:SCL Clock High Time 100 kHz mode 4.0 — μs Device must operate at a
minimum of 1.5 MHz
400 kHz mode 0.6 — μs Device must operate at a
minimum of 10 MHz
1 MHz mode(1) 0.5 — μs —
IS20 TF:SCL SDAx and SCLx 100 kHz mode — 300 ns CB is specified to be from
Fall Time 400 kHz mode 20 + 0.1 CB 300 ns 10 to 400 pF
1 MHz mode(1) — 100 ns
IS21 TR:SCL SDAx and SCLx 100 kHz mode — 1000 ns CB is specified to be from
Rise Time 400 kHz mode 20 + 0.1 CB 300 ns 10 to 400 pF
1 MHz mode(1) — 300 ns
IS25 TSU:DAT Data Input 100 kHz mode 250 — ns —
Setup Time 400 kHz mode 100 — ns
1 MHz mode(1) 100 — ns
IS26 THD:DAT Data Input 100 kHz mode 0 — μs —
Hold Time 400 kHz mode 0 0.9 μs
1 MHz mode(1) 0 0.3 μs
IS30 TSU:STA Start Condition 100 kHz mode 4.7 — μs Only relevant for Repeated
Setup Time 400 kHz mode 0.6 — μs Start condition
1 MHz mode(1) 0.25 — μs
IS31 THD:STA Start Condition 100 kHz mode 4.0 — μs After this period, the first
Hold Time 400 kHz mode 0.6 — μs clock pulse is generated
1 MHz mode(1) 0.25 — μs
IS33 TSU:STO Stop Condition 100 kHz mode 4.7 — μs —
Setup Time 400 kHz mode 0.6 — μs
1 MHz mode(1) 0.6 — μs
IS34 THD:ST Stop Condition 100 kHz mode 4000 — ns —
O Hold Time 400 kHz mode 600 — ns
1 MHz mode(1) 250 ns
IS40 TAA:SCL Output Valid 100 kHz mode 0 3500 ns —
From Clock 400 kHz mode 0 1000 ns
1 MHz mode(1) 0 350 ns
IS45 TBF:SDA Bus Free Time 100 kHz mode 4.7 — μs Time the bus must be free
400 kHz mode 1.3 — μs before a new transmission
can start
1 MHz mode(1) 0.5 — μs
IS50 CB Bus Capacitive Loading — 400 pF —
Note 1: Maximum pin capacitance = 10 pF for all I2Cx pins (for 1 MHz mode only).

DS70290B-page 228 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 21-34: ADC MODULE SPECIFICATIONS

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
AC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symbol Characteristic Min. Typ Max. Units Conditions
No.
Device Supply
AD01 AVDD Module VDD Supply Greater of — Lesser of V
VDD – 0.3 VDD + 0.3 —
or 3.0 or 3.6
AD02 AVSS Module VSS Supply VSS – 0.3 — VSS + 0.3 V —
Reference Inputs
AD05 VREFH Reference Voltage High AVSS + 2.7 — AVDD V See Note 1
AD05a 3.0 — 3.6 V VREFH = AVDD
VREFL = AVSS = 0
AD06 VREFL Reference Voltage Low AVSS — AVDD – 2.7 V See Note 1
AD06a 0 — 0 V VREFH = AVDD
VREFL = AVSS = 0
AD07 VREF Absolute Reference Voltage 2.7 — 3.6 V VREF = VREFH - VREFL
AD08 IREF Current Drain — 400 550 μA ADC operating
— 10 μA ADC off
Analog Input
AD12 VINH Input Voltage Range VINH VINL — VREFH V This voltage reflects
Sample and Hold Channels
0, 1, 2, and 3 (CH0-CH3),
positive input
AD13 VINL Input Voltage Range VINL VREFL — AVSS + 1V V This voltage reflects
Sample and Hold Channels
0, 1, 2, and 3 (CH0-CH3),
negative input
AD17 RIN Recommended Impedance — — 200 Ω 10-bit ADC
of Analog Voltage Source — — 200 Ω 12-bit ADC
Note 1: These parameters are not characterized or tested in manufacturing.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 229

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 21-35: ADC MODULE SPECIFICATIONS (12-BIT MODE)

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
AC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symbol Characteristic Min. Typ Max. Units Conditions
No.
ADC Accuracy (12-bit Mode) – Measurements with external VREF+/VREF-
AD20a Nr Resolution 12 data bits bits —
AD21a INL Integral Nonlinearity -2 — +2 LSb VINL = AVSS = VREFL = 0V,
AVDD = VREFH = 3.6V
AD22a DNL Differential Nonlinearity >-1 — <1 LSb VINL = AVSS = VREFL = 0V,
AVDD = VREFH = 3.6V
AD23a GERR Gain Error 1.25 1.5 3 LSb VINL = AVSS = VREFL = 0V,
AVDD = VREFH = 3.6V
AD24a EOFF Offset Error 1.25 1.52 2 LSb VINL = AVSS = VREFL = 0V,
AVDD = VREFH = 3.6V
AD25a — Monotonicity — — — — Guaranteed(1)
ADC Accuracy (12-bit Mode) – Measurements with internal VREF+/VREF-
AD20a Nr Resolution 12 data bits bits —
AD21a INL Integral Nonlinearity -2 — +2 LSb VINL = AVSS = 0V, AVDD = 3.6V
AD22a DNL Differential Nonlinearity >-1 — <1 LSb VINL = AVSS = 0V, AVDD = 3.6V
AD23a GERR Gain Error 2 3 7 LSb VINL = AVSS = 0V, AVDD = 3.6V
AD24a EOFF Offset Error 2 3 5 LSb VINL = AVSS = 0V, AVDD = 3.6V
AD25a — Monotonicity — — — — Guaranteed(1)
Dynamic Performance (12-bit Mode)
AD30a THD Total Harmonic Distortion -77 -69 -61 dB —
AD31a SINAD Signal to Noise and 59 63 64 dB —
Distortion
AD32a SFDR Spurious Free Dynamic 63 72 74 dB —
Range
AD33a FNYQ Input Signal Bandwidth — — 250 kHz —
AD34a ENOB Effective Number of Bits 10.95 11.1 — bits —
Note 1: The A/D conversion result never decreases with an increase in the input voltage, and has no missing
codes.

DS70290B-page 230 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 21-36: ADC MODULE SPECIFICATIONS (10-BIT MODE)

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
AC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symbol Characteristic Min. Typ Max. Units Conditions
No.
ADC Accuracy (10-bit Mode) – Measurements with external VREF+/VREF-
AD20b Nr Resolution 10 data bits bits —
AD21b INL Integral Nonlinearity -1.5 — +1.5 LSb VINL = AVSS = VREFL = 0V,
AVDD = VREFH = 3.6V
AD22b DNL Differential Nonlinearity >-1 — <1 LSb VINL = AVSS = VREFL = 0V,
AVDD = VREFH = 3.6V
AD23b GERR Gain Error 1 3 6 LSb VINL = AVSS = VREFL = 0V,
AVDD = VREFH = 3.6V
AD24b EOFF Offset Error 1 2 5 LSb VINL = AVSS = VREFL = 0V,
AVDD = VREFH = 3.6V
AD25b — Monotonicity — — — — Guaranteed(1)
ADC Accuracy (10-bit Mode) – Measurements with internal VREF+/VREF-
AD20b Nr Resolution 10 data bits bits —
AD21b INL Integral Nonlinearity -1 — +1 LSb VINL = AVSS = 0V, AVDD = 3.6V
AD22b DNL Differential Nonlinearity >-1 — <1 LSb VINL = AVSS = 0V, AVDD = 3.6V
AD23b GERR Gain Error 1 5 6 LSb VINL = AVSS = 0V, AVDD = 3.6V
AD24b EOFF Offset Error 1 2 3 LSb VINL = AVSS = 0V, AVDD = 3.6V
AD25b — Monotonicity — — — — Guaranteed(1)
Dynamic Performance (10-bit Mode)
AD30b THD Total Harmonic Distortion — -64 -67 dB —
AD31b SINAD Signal to Noise and — 57 58 dB —
Distortion
AD32b SFDR Spurious Free Dynamic — 60 62 dB —
Range
AD33b FNYQ Input Signal Bandwidth — — 550 kHz —
AD34b ENOB Effective Number of Bits 9.1 9.7 9.8 bits —
Note 1: The A/D conversion result never decreases with an increase in the input voltage, and has no missing
codes.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 231

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

FIGURE 21-17: ADC CONVERSION (12-BIT MODE) TIMING CHARACTERISTICS

(ASAM = 0, SSRC<2:0> = 000)

AD50

ADCLK
Instruction
Execution Set SAMP Clear SAMP

SAMP

AD61
AD60

TSAMP AD55

DONE

AD1IF

1 2 3 4 5 6 7 8 9

1 – Software sets AD1CON. SAMP to start sampling. 5 – Convert bit 11.

2 – Sampling starts after discharge period. TSAMP is described in 6 – Convert bit 10.
Section 28. “10/12-bit ADC without DMA” in the
“dsPIC33F Family Reference Manual”. 7 – Convert bit 1.
3 – Software clears AD1CON. SAMP to start conversion. 8 – Convert bit 0.
4 – Sampling ends, conversion sequence starts. 9 – One TAD for end of conversion.

TABLE 21-37: ADC CONVERSION (12-BIT MODE) TIMING REQUIREMENTS

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
AC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symbol Characteristic Min. Typ Max. Units Conditions
No.
Clock Parameters
AD50 TAD ADC Clock Period 117.6 — — ns —
AD51 tRC ADC Internal RC Oscillator — 250 — ns —
Period
Conversion Rate
AD55 tCONV Conversion Time — 14 TAD — ns —
AD56 FCNV Throughput Rate — — 500 Ksps —
AD57 TSAMP Sample Time 3.0 TAD — — — —
Timing Parameters
AD60 tPCS Conversion Start from Sample 2.0 TAD — 3.0 TAD — Auto Convert Trigger
Trigger(2) not selected
AD61 tPSS Sample Start from Setting 2.0 TAD — 3.0 TAD — —
Sample (SAMP) bit(2)
AD62 tCSS Conversion Completion to — 0.5 TAD — — —
Sample Start (ASAM = 1)(2)
AD63 tDPU Time to Stabilize Analog Stage — — 20 μs —
from ADC Off to ADC On(2)
Note 1: Because the sample caps will eventually lose charge, clock rates below 10 kHz can affect linearity
performance, especially at elevated temperatures.
2: These parameters are characterized but not tested in manufacturing.

DS70290B-page 232 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

FIGURE 21-18: ADC CONVERSION (10-BIT MODE) TIMING CHARACTERISTICS

(CHPS<1:0> = 01, SIMSAM = 0, ASAM = 0, SSRC<2:0> = 000)

AD50

ADCLK
Instruction
Execution Set SAMP Clear SAMP

SAMP

AD61
AD60

TSAMP AD55 AD55

DONE

AD1IF

Buffer(0)

Buffer(1)

1 2 3 4 5 6 7 8 5 6 7 8

1 – Software sets AD1CON. SAMP to start sampling. 5 – Convert bit 9.

2 – Sampling starts after discharge period. TSAMP is described in 6 – Convert bit 8.
Section 28. “10/12-bit ADC without DMA” in the
7 – Convert bit 0.
“dsPIC33F Family Reference Manual”.
3 – Software clears AD1CON. SAMP to start conversion. 8 – One TAD for end of conversion.

4 – Sampling ends, conversion sequence starts.

FIGURE 21-19: ADC CONVERSION (10-BIT MODE) TIMING CHARACTERISTICS (CHPS<1:0> = 01,
SIMSAM = 0, ASAM = 1, SSRC<2:0> = 111, SAMC<4:0> = 00001)
AD50

ADCLK

Instruction
Set ADON
Execution

SAMP
TSAMP AD55 AD55 TSAMP AD55

AD1IF

DONE

1 2 3 4 5 6 7 3 4 5 6 8

1 – Software sets AD1CON. ADON to start AD operation. 5 – Convert bit 0.

2 – Sampling starts after discharge period. TSAMP is described in 6 – One TAD for end of conversion.
Section 28. “10/12-bit ADC without DMA” in the
“dsPIC33F Family Reference Manual”. 7 – Begin conversion of next channel.

3 – Convert bit 9. 8 – Sample for time specified by SAMC<4:0>.

4 – Convert bit 8.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 233

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 21-38: ADC CONVERSION (10-BIT MODE) TIMING REQUIREMENTS

Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
AC CHARACTERISTICS
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
Symbol Characteristic Min. Typ(1) Max. Units Conditions
No.
Clock Parameters
AD50 TAD ADC Clock Period 76 — — ns —
AD51 tRC ADC Internal RC Oscillator Period — 250 — ns —
Conversion Rate
AD55 tCONV Conversion Time — 12 TAD — — —
AD56 FCNV Throughput Rate — — 1.1 Msps —
AD57 TSAMP Sample Time 2.0 TAD — — — —
Timing Parameters
AD60 tPCS Conversion Start from Sample 2.0 TAD — 3.0 TAD — Auto-Convert Trigger
Trigger(1) not selected
AD61 tPSS Sample Start from Setting 2.0 TAD — 3.0 TAD — —
Sample (SAMP) bit(1)
AD62 tCSS Conversion Completion to — 0.5 TAD — — —
Sample Start (ASAM = 1)(1)
AD63 tDPU Time to Stabilize Analog Stage — — 20 μs —
from ADC Off to ADC On(1)
Note 1: These parameters are characterized but not tested in manufacturing.
2: Because the sample caps will eventually lose charge, clock rates below 10 kHz can affect linearity
performance, especially at elevated temperatures.

DS70290B-page 234 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
22.0 PACKAGING INFORMATION
22.1 Package Marking Information
28-Lead SPDIP Example

XXXXXXXXXXXXXXXXX dsPIC33FJ32GP
XXXXXXXXXXXXXXXXX 202-E/SP e3
YYWWNNN 0730235

28-Lead SOIC (.300”) Example

XXXXXXXXXXXXXXXXXXXX dsPIC33FJ32GP
XXXXXXXXXXXXXXXXXXXX 202-E/SO e3
XXXXXXXXXXXXXXXXXXXX 0730235
YYWWNNN

28-Lead QFN-S Example

XXXXXXXX 33FJ32GP
XXXXXXXX 202EMM e3
YYWWNNN 0730235

44-Lead QFN Example

XXXXXXXXXX dsPIC33FJ32
XXXXXXXXXX GP204-E/ML e3
XXXXXXXXXX 0730235
YYWWNNN

44-Lead TQFP Example

XXXXXXXXXX dsPIC33FJ
XXXXXXXXXX 32GP204
XXXXXXXXXX -E/PT e3
YYWWNNN 0730235

Legend: XX...X Customer-specific information

Y Year code (last digit of calendar year)
YY Year code (last 2 digits of calendar year)
WW Week code (week of January 1 is week ‘01’)
NNN Alphanumeric traceability code
e3 Pb-free JEDEC designator for Matte Tin (Sn)
* This package is Pb-free. The Pb-free JEDEC designator ( e3 )
can be found on the outer packaging for this package.

Note: If the full Microchip part number cannot be marked on one line, it is carried over to the next
line, thus limiting the number of available characters for customer-specific information.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 235

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

22.2 Package Details

28-Lead Skinny Plastic Dual In-Line (SP) – 300 mil Body [SPDIP]
Note: For the most current package drawings, please see the Microchip Packaging Specification located at
http://www.microchip.com/packaging

NOTE 1
E1

1 2 3

A A2

L c

A1 b1
b e eB

Units INCHES
Dimension Limits MIN NOM MAX
Number of Pins N 28
Pitch e .100 BSC
Top to Seating Plane A – – .200
Molded Package Thickness A2 .120 .135 .150
Base to Seating Plane A1 .015 – –
Shoulder to Shoulder Width E .290 .310 .335
Molded Package Width E1 .240 .285 .295
Overall Length D 1.345 1.365 1.400
Tip to Seating Plane L .110 .130 .150
Lead Thickness c .008 .010 .015
Upper Lead Width b1 .040 .050 .070
Lower Lead Width b .014 .018 .022
Overall Row Spacing § eB – – .430
Notes:
1. Pin 1 visual index feature may vary, but must be located within the hatched area.
2. § Significant Characteristic.
3. Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed .010" per side.
4. Dimensioning and tolerancing per ASME Y14.5M.
BSC: Basic Dimension. Theoretically exact value shown without tolerances.

Microchip Technology Drawing C04-070B

DS70290B-page 236 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

28-Lead Plastic Small Outline (SO) – Wide, 7.50 mm Body [SOIC]

Note: For the most current package drawings, please see the Microchip Packaging Specification located at
http://www.microchip.com/packaging

D
N

E
E1

NOTE 1

1 2 3
e
b

h
α
h

φ c
A A2

L
A1 L1 β

Units MILLMETERS
Dimension Limits MIN NOM MAX
Number of Pins N 28
Pitch e 1.27 BSC
Overall Height A – – 2.65
Molded Package Thickness A2 2.05 – –
Standoff § A1 0.10 – 0.30
Overall Width E 10.30 BSC
Molded Package Width E1 7.50 BSC
Overall Length D 17.90 BSC
Chamfer (optional) h 0.25 – 0.75
Foot Length L 0.40 – 1.27
Footprint L1 1.40 REF
Foot Angle Top φ 0° – 8°
Lead Thickness c 0.18 – 0.33
Lead Width b 0.31 – 0.51
Mold Draft Angle Top α 5° – 15°
Mold Draft Angle Bottom β 5° – 15°
Notes:
1. Pin 1 visual index feature may vary, but must be located within the hatched area.
2. § Significant Characteristic.
3. Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed 0.15 mm per side.
4. Dimensioning and tolerancing per ASME Y14.5M.
BSC: Basic Dimension. Theoretically exact value shown without tolerances.
REF: Reference Dimension, usually without tolerance, for information purposes only.
Microchip Technology Drawing C04-052B

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 237

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

28-Lead Plastic Quad Flat, No Lead Package (MM) – 6x6x0.9 mm Body [QFN-S]
with 0.40 mm Contact Length
Note: For the most current package drawings, please see the Microchip Packaging Specification located at
http://www.microchip.com/packaging

D D2
EXPOSED
PAD

E2
E
b
2 2
1 1 K

N N
L
NOTE 1 BOTTOM VIEW
TOP VIEW

A3 A1

Units MILLIMETERS
Dimension Limits MIN NOM MAX
Number of Pins N 28
Pitch e 0.65 BSC
Overall Height A 0.80 0.90 1.00
Standoff A1 0.00 0.02 0.05
Contact Thickness A3 0.20 REF
Overall Width E 6.00 BSC
Exposed Pad Width E2 3.65 3.70 4.70
Overall Length D 6.00 BSC
Exposed Pad Length D2 3.65 3.70 4.70
Contact Width b 0.23 0.38 0.43
Contact Length L 0.30 0.40 0.50
Contact-to-Exposed Pad K 0.20 – –
Notes:
1. Pin 1 visual index feature may vary, but must be located within the hatched area.
2. Package is saw singulated.
3. Dimensioning and tolerancing per ASME Y14.5M.
BSC: Basic Dimension. Theoretically exact value shown without tolerances.
REF: Reference Dimension, usually without tolerance, for information purposes only.
Microchip Technology Drawing C04-124B

DS70290B-page 238 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

44-Lead Plastic Quad Flat, No Lead Package (ML) – 8x8 mm Body [QFN]
Note: For the most current package drawings, please see the Microchip Packaging Specification located at
http://www.microchip.com/packaging

D D2
EXPOSED
PAD

E2
b

2 2
1 1
N N K
NOTE 1 L

TOP VIEW BOTTOM VIEW

A3 A1

Units MILLIMETERS
Dimension Limits MIN NOM MAX
Number of Pins N 44
Pitch e 0.65 BSC
Overall Height A 0.80 0.90 1.00
Standoff A1 0.00 0.02 0.05
Contact Thickness A3 0.20 REF
Overall Width E 8.00 BSC
Exposed Pad Width E2 6.30 6.45 6.80
Overall Length D 8.00 BSC
Exposed Pad Length D2 6.30 6.45 6.80
Contact Width b 0.25 0.30 0.38
Contact Length L 0.30 0.40 0.50
Contact-to-Exposed Pad K 0.20 – –
Notes:
1. Pin 1 visual index feature may vary, but must be located within the hatched area.
2. Package is saw singulated.
3. Dimensioning and tolerancing per ASME Y14.5M.
BSC: Basic Dimension. Theoretically exact value shown without tolerances.
REF: Reference Dimension, usually without tolerance, for information purposes only.

Microchip Technology Drawing C04-103B

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 239

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

44-Lead Plastic Thin Quad Flatpack (PT) – 10x10x1 mm Body, 2.00 mm Footprint [TQFP]
Note: For the most current package drawings, please see the Microchip Packaging Specification located at
http://www.microchip.com/packaging

D
D1

E
e
E1

N
b
NOTE 1 1 2 3
NOTE 2
A α
c φ

β A1 A2
L L1

Units MILLIMETERS
Dimension Limits MIN NOM MAX
Number of Leads N 44
Lead Pitch e 0.80 BSC
Overall Height A – – 1.20
Molded Package Thickness A2 0.95 1.00 1.05
Standoff A1 0.05 – 0.15
Foot Length L 0.45 0.60 0.75
Footprint L1 1.00 REF
Foot Angle φ 0° 3.5° 7°
Overall Width E 12.00 BSC
Overall Length D 12.00 BSC
Molded Package Width E1 10.00 BSC
Molded Package Length D1 10.00 BSC
Lead Thickness c 0.09 – 0.20
Lead Width b 0.30 0.37 0.45
Mold Draft Angle Top α 11° 12° 13°
Mold Draft Angle Bottom β 11° 12° 13°
Notes:
1. Pin 1 visual index feature may vary, but must be located within the hatched area.
2. Chamfers at corners are optional; size may vary.
3. Dimensions D1 and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed 0.25 mm per side.
4. Dimensioning and tolerancing per ASME Y14.5M.
BSC: Basic Dimension. Theoretically exact value shown without tolerances.
REF: Reference Dimension, usually without tolerance, for information purposes only.
Microchip Technology Drawing C04-076B

DS70290B-page 240 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

APPENDIX A: REVISION HISTORY

Revision A (July 2007)

Initial release of this document.

Revision B (June 2008)

This revision includes minor typographical and
formatting changes throughout the data sheet text.
The major changes are referenced by their respective
section in the following table.

TABLE 22-1: MAJOR SECTION UPDATES

Section Name Update Description
“High-Performance, 16-bit Digital Added Extended Interrupts column to Remappable Peripherals in the
Signal Controllers” Controller Families table and Note 2 (see Table 1).

Added Note 1 to all pin diagrams, which references RPn pin usage by
remappable peripherals (see “Pin Diagrams”).
Section 1.0 “Device Overview” Changed PORTA pin name from RA15 to RA10 (see Table 1-1).
Section 3.0 “Memory Organization” Added SFR definitions (ACCAL, ACCAH, ACCAU, ACCBL, ACCBH, and
ACCBU) to the CPU Core Register Map (see Table 3-1).

Updated Reset value for CORCON (see Table 3-1).

Updated Reset values for the following SFRs: IPC1, IPC3-IPC5, IPC7,
IPC16 and INTTREG (see Table 3-4).

Updated the Reset value for CLKDIV in the System Control Register Map
(see Table 3-20).
Section 5.0 “Resets” Entire section was replaced to maintain consistency with other dsPIC33F
data sheets.
Section 7.0 “Oscillator Removed the first sentence of the third clock source item (External Clock) in
Configuration” Section 7.1.1.2 “Primary”.

Updated the default bit values for DOZE and FRCDIV in the Clock Divisor
Register (see Register 7-2).

Added the center frequency in the OSCTUN register for the FRC Tuning bits
(TUN<5:0>) value 011111 and updated the center frequency for bits value
011110 (see Register 7-4).
Section 8.0 “Power-Saving Added the following two registers:
Features” • PMD1: Peripheral Module Disable Control Register 1
• PMD2: Peripheral Module Disable Control Register 2
Section 9.0 “I/O Ports” Added paragraph and Table 9-1 to Section 9.1.1 “Open-Drain
Configuration”, which provides details on I/O pins and their functionality.

Removed the following sections, which are now available in the related
section of the dsPIC33F Family Reference Manual:
• 9.4.2 “Available Peripherals”
• 9.4.3.3 “Mapping”
• 9.4.5 “Considerations for Peripheral Pin Selection”
Section 13.0 “Output Compare” Replaced sections 13.1, 13.2 and 13.3 and related figures and tables with
entirely new content.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 241

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 22-1: MAJOR SECTION UPDATES (CONTINUED)

Section Name Update Description
Section 14.0 “Serial Peripheral Removed the following sections, which are now available in the related
Interface (SPI)” section of the dsPIC33F Family Reference Manual:
• 14.1 “Interrupts”
• 14.2 “Receive Operations”
• 14.3 “Transmit Operations”
• 14.4 “SPI Setup” (retained Figure 14-1: SPI Module Block Diagram)
Section 15.0 “Inter-Integrated Removed the following sections, which are now available in the related
Circuit (I2C™)” section of the dsPIC33F Family Reference Manual:
• 15.3 “I2C Interrupts”
• 15.4 “Baud Rate Generator” (retained Figure 15-1: I2C Block Diagram)
• 15.5 “I2C Module Addresses”
• 15.6 “Slave Address Masking”
• 15.7 “IPMI Support”
• 15.8 “General Call Address Support”
• 15.9 “Automatic Clock Stretch”
• 15.10 “Software Controlled Clock Stretching (STREN = 1)”
• 15.11 “Slope Control”
• 15.12 “Clock Arbitration”
• 15.13 “Multi-Master Communication, Bus Collision, and Bus Arbitration”
• 15.14 “Peripheral Pin Select Limitations”
Section 16.0 “Universal Removed the following sections, which are now available in the related
Asynchronous Receiver Transmitter section of the dsPIC33F Family Reference Manual:
(UART)” • 16.1 “UART Baud Rate Generator”
• 16.2 “Transmitting in 8-bit Data Mode”
• 16.3 “Transmitting in 9-bit Data Mode”
• 16.4 “Break and Sync Transmit Sequence”
• 16.5 “Receiving in 8-bit or 9-bit Data Mode”
• 16.6 “Flow Control Using UxCTS and UxRTS Pins”
• 16.7 “Infrared Support”

Removed IrDA references and Note 1, and updated the bit and bit value
descriptions for UTXINV (UxSTA<14>) in the UARTx Status and Control
Register (see Register 16-2).
Section 17.0 “10-bit/12-bit Analog- Removed Equation 17-1: ADC Conversion Clock Period and Figure 17-2:
to-Digital Converter (ADC)” ADC Transfer Function (10-Bit Example).

Added ADC1 Module Block Diagram for dsPIC33FJ16GP304 and

dsPIC33FJ32GP204 Devices (Figure 17-1) and ADC1 Module Block
Diagram FOR dsPIC33FJ32GP202 Devices (Figure 17-2).

Added Note 2 to Figure 17-3: ADC Conversion Clock Period Block Diagram.

Added device-specific information to Note 1 in the ADC1 Input Scan Select

Register Low (see Register 17-6), and updated the default bit value for bits
12-10 (CSS12-CSS10) from U-0 to R/W-0.

Added device-specific information to Note 1 in the ADC1 Port Configuration

Register Low (see Register 17-7), and updated the default bit value for bits
12-10 (PCFG12-PCFG10) from U-0 to R/W-0.

DS70290B-page 242 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

TABLE 22-1: MAJOR SECTION UPDATES (CONTINUED)

Section Name Update Description
Section 18.0 “Special Features” Added FICD register information for address 0xF8000E in the Device
Configuration Register Map (see Table 18-1).

Added FICD register content (BKBUG, COE, JTAGEN, and ICS<1:0> to the
dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 Configuration Bits
Description (see Table 18-2).

Added a note regarding the placement of low-ESR capacitors, after the

second paragraph of Section 18.2 “On-Chip Voltage Regulator” and to
Figure 18-1.

Removed the words “if enabled” from the second sentence in the fifth
paragraph of Section 18.3 “BOR: Brown-Out Reset”.
Section 21.0 “Electrical Updated Max MIPS value for -40ºC to +125ºC temperature range in
Characteristics” Operating MIPS vs. Voltage (see Table 21-1).

Removed Typ value for parameter DC12 (see Table 21-4).

Updated MIPS conditions for parameters DC24c, DC44c, DC72a, DC72f

and DC72g (see Table 21-5, Table 21-6 and Table 21-8).

Added Note 4 (reference to new table containing digital-only and analog pin
information to I/O Pin Input Specifications (see Table 21-9).

Updated Typ, Min, and Max values for Program Memory parameters D136,
D137, and D138 (see Table 21-12).

Updated Max value for Internal RC Accuracy parameter F21 for -40°C ≤ TA
≤ +125°C condition and added Note 2 (see Table 21-19).

Removed all values for Reset, Watchdog Timer, Oscillator Start-up Timer,
and Power-up Timer parameter SY20 and updated conditions, which now
refers to Section 18.4 “Watchdog Timer (WDT)” and LPRC parameter
F21 (see Table 21-21).

Updated Min and Typ values for parameters AD60, AD61, AD62 and AD63
and removed Note 3 (see Table 21-37).

Updated Min and Typ values for parameters AD60, AD61, AD62 and AD63
and removed Note 3 (see Table 21-38).

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 243

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

NOTES:

DS70290B-page 244 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

INDEX
A Customer Change Notification Service............................. 248
A/D Converter ................................................................... 167 Customer Notification Service .......................................... 248
Customer Support............................................................. 248
Initialization ............................................................... 167
Key Features............................................................. 167 D
AC Characteristics ............................................................ 210
Data Accumulators and Adder/Subtractor .......................... 23
Internal RC Accuracy ................................................ 212
Data Space Write Saturation ...................................... 25
Load Conditions ........................................................ 210
Overflow and Saturation ............................................. 23
ADC Module
Round Logic ............................................................... 24
ADC11 Register Map ...................................... 37, 39, 40
Write Back .................................................................. 24
Alternate Interrupt Vector Table .......................................... 67
Data Address Space........................................................... 29
Alternate Vector Table (AIVT) ............................................. 67
Alignment.................................................................... 29
Arithmetic Logic Unit (ALU)................................................. 21
Memory Map for dsPIC33F Devices with 8 KBs RAM 30
Assembler
Near Data Space ........................................................ 29
MPASM Assembler................................................... 198
Software Stack ........................................................... 43
B Width .......................................................................... 29
DC Characteristics............................................................ 202
Barrel Shifter ....................................................................... 25
Bit-Reversed Addressing .................................................... 46 I/O Pin Input Specifications ...................................... 207
I/O Pin Output Specifications.................................... 208
Example ...................................................................... 47
Idle Current (IDOZE) .................................................. 206
Implementation ........................................................... 46
Sequence Table (16-Entry)......................................... 47 Idle Current (IIDLE) .................................................... 205
Operating Current (IDD) ............................................ 204
Block Diagrams
Power-Down Current (IPD)........................................ 206
16-bit Timer1 Module ................................................ 133
A/D Module ....................................................... 168, 169 Program Memory...................................................... 209
Connections for On-Chip Voltage Regulator............. 185 Temperature and Voltage Specifications.................. 203
Development Support ....................................................... 197
Device Clock ......................................................... 95, 97
DSP Engine ........................................................................ 21
DSP Engine ................................................................ 22
dsPIC33F .................................................................... 12 Multiplier ..................................................................... 23
dsPIC33F CPU Core................................................... 16 E
Input Capture ............................................................ 141
Electrical Characteristics .................................................. 201
Output Compare ....................................................... 143
AC............................................................................. 210
PLL.............................................................................. 97
Equations
Reset System.............................................................. 59
Device Operating Frequency...................................... 96
Shared Port Structure ............................................... 109
Errata .................................................................................... 9
SPI ............................................................................ 147
Timer2 (16-bit) .......................................................... 137 F
Timer2/3 (32-bit) ....................................................... 136
Flash Program Memory ...................................................... 53
UART ........................................................................ 161
Control Registers........................................................ 54
Watchdog Timer (WDT) ............................................ 186 Operations .................................................................. 54
C Programming Algorithm.............................................. 57
RTSP Operation ......................................................... 54
C Compilers
Table Instructions ....................................................... 53
MPLAB C18 .............................................................. 198
Flexible Configuration ....................................................... 181
MPLAB C30 .............................................................. 198
Clock Switching................................................................. 103 I
Enabling .................................................................... 103 I/O Ports ........................................................................... 109
Sequence.................................................................. 103
Parallel I/O (PIO) ...................................................... 109
Code Examples
Write/Read Timing.................................................... 111
Erasing a Program Memory Page............................... 57 I2 C
Initiating a Programming Sequence............................ 58
Operating Modes ...................................................... 153
Loading Write Buffers ................................................. 58
Registers .................................................................. 153
Port Write/Read ........................................................ 111 I2C Module
PWRSAV Instruction Syntax..................................... 105
I2C1 Register Map...................................................... 36
Code Protection ........................................................ 181, 187
In-Circuit Debugger........................................................... 188
Configuration Bits.............................................................. 181 In-Circuit Emulation .......................................................... 181
Description (Table).................................................... 182
In-Circuit Serial Programming (ICSP)....................... 181, 188
Configuration Register Map .............................................. 181
Input Capture
Configuring Analog Port Pins ............................................ 111 Registers .................................................................. 142
CPU
Input Change Notification ................................................. 111
Control Register .......................................................... 18
Instruction Addressing Modes ............................................ 43
CPU Clocking System......................................................... 96 File Register Instructions ............................................ 43
Options........................................................................ 96
Fundamental Modes Supported ................................. 44
Selection ..................................................................... 96
MAC Instructions ........................................................ 44

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 245

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

MCU Instructions ........................................................ 43 Register Map .............................................................. 41

Move and Accumulator Instructions ............................ 44 Power-on Reset (POR)....................................................... 64
Other Instructions........................................................ 44 Power-Saving Features .................................................... 105
Instruction Set Clock Frequency and Switching ............................... 105
Overview ................................................................... 192 Program Address Space..................................................... 27
Summary................................................................... 189 Construction ............................................................... 48
Instruction-Based Power-Saving Modes ........................... 105 Data Access from Program Memory Using Program
Idle ............................................................................ 106 Space Visibility ................................................... 51
Sleep ......................................................................... 105 Data Access from Program Memory Using Table Instruc-
Internal RC Oscillator tions .................................................................... 50
Use with WDT ........................................................... 186 Data Access from, Address Generation ..................... 49
Internet Address................................................................ 248 Memory Map............................................................... 27
Interrupt Control and Status Registers................................ 71 Table Read Instructions
IECx ............................................................................ 71 TBLRDH ............................................................. 50
IFSx............................................................................. 71 TBLRDL.............................................................. 50
INTCON1 .................................................................... 71 Visibility Operation ...................................................... 51
INTCON2 .................................................................... 71 Program Memory
IPCx ............................................................................ 71 Interrupt Vector ........................................................... 28
Interrupt Setup Procedures ................................................. 93 Organization ............................................................... 28
Initialization ................................................................. 93 Reset Vector ............................................................... 28
Interrupt Disable.......................................................... 93
Interrupt Service Routine ............................................ 93 R
Trap Service Routine .................................................. 93 Reader Response............................................................. 249
Interrupt Vector Table (IVT) ................................................ 67 Registers
Interrupts Coincident with Power Save Instructions.......... 106 AD1CHS0 (ADC1 Input Channel 0 Select ................ 177
AD1CHS123 (ADC1 Input Channel 1, 2, 3 Select)... 175
J AD1CON1 (ADC1 Control 1) .................................... 171
JTAG Boundary Scan Interface ........................................ 181 AD1CON2 (ADC1 Control 2) .................................... 173
AD1CON3 (ADC1 Control 3) .................................... 174
M AD1CSSL (ADC1 Input Scan Select Low)................ 179
Memory Organization.......................................................... 27 AD1PCFGL (ADC1 Port Configuration Low) ............ 179
Microchip Internet Web Site .............................................. 248 CLKDIV (Clock Divisor) ............................................ 100
Modulo Addressing ............................................................. 45 CORCON (Core Control) ...................................... 20, 72
Applicability ................................................................. 46 I2CxCON (I2Cx Control) ........................................... 155
Operation Example ..................................................... 45 I2CxMSK (I2Cx Slave Mode Address Mask) ............ 159
Start and End Address ................................................ 45 I2CxSTAT (I2Cx Status) ........................................... 157
W Address Register Selection .................................... 45 ICxCON (Input Capture x Control)............................ 142
MPLAB ASM30 Assembler, Linker, Librarian ................... 198 IEC0 (Interrupt Enable Control 0) ................... 80, 82, 83
MPLAB ICD 2 In-Circuit Debugger.................................... 199 IFS0 (Interrupt Flag Status 0) ..................................... 76
MPLAB ICE 2000 High-Performance Universal In-Circuit Em- IFS1 (Interrupt Flag Status 1) ..................................... 78
ulator ......................................................................... 199 IFS4 (Interrupt Flag Status 4) ..................................... 79
MPLAB Integrated Development Environment Software .. 197 INTCON1 (Interrupt Control 1).................................... 73
MPLAB PM3 Device Programmer..................................... 199 INTCON2 (Interrupt Control 2).................................... 75
MPLAB REAL ICE In-Circuit Emulator System................. 199 INTTREG Interrupt Control and Status Register ........ 92
MPLINK Object Linker/MPLIB Object Librarian ................ 198 IPC0 (Interrupt Priority Control 0) ............................... 84
IPC1 (Interrupt Priority Control 1) ............................... 85
N IPC16 (Interrupt Priority Control 16) ........................... 91
NVM Module IPC2 (Interrupt Priority Control 2) ............................... 86
Register Map............................................................... 42 IPC3 (Interrupt Priority Control 3) ............................... 87
IPC4 (Interrupt Priority Control 4) ............................... 88
O
IPC5 (Interrupt Priority Control 5) ............................... 89
Open-Drain Configuration ................................................. 110 IPC7 (Interrupt Priority Control 7) ............................... 90
Output Compare................................................................ 143 NVMCOM (Flash Memory Control)....................... 55, 56
Registers ................................................................... 145 OCxCON (Output Compare x Control) ..................... 145
P OSCCON (Oscillator Control) ..................................... 98
OSCTUN (FRC Oscillator Tuning)............................ 102
Packaging ......................................................................... 235
PLLFBD (PLL Feedback Divisor).............................. 101
Details ....................................................................... 236 PMD1 (Peripheral Module Disable Control Register 1) ..
Marking ..................................................................... 235
107
Peripheral Module Disable (PMD)..................................... 106
PMD2 (Peripheral Module Disable Control Register 2) ..
PICSTART Plus Development Programmer ..................... 200 108
Pinout I/O Descriptions (table) ............................................ 13
RCON (Reset Control)................................................ 60
PMD Module
SPIxCON1 (SPIx Control 1)...................................... 149
Register Map............................................................... 42 SPIxCON2 (SPIx Control 2)...................................... 151
PORTA
SPIxSTAT (SPIx Status and Control) ....................... 148
Register Map............................................................... 41
SR (CPU Status)................................................... 18, 72
PORTB

DS70290B-page 246 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

T1CON (Timer1 Control)........................................... 134 Output Compare (OCx) ............................................ 218

TxCON (T2CON, T4CON, T6CON or T8CON Control) .. Reset, Watchdog Timer, Oscillator Start-up Timer and
138 Power-up Timer ................................................ 214
TyCON (T3CON, T5CON, T7CON or T9CON Control) .. SPIx Master Mode (CKE = 0) ................................... 220
139 SPIx Master Mode (CKE = 1) ................................... 221
UxMODE (UARTx Mode).......................................... 162 SPIx Slave Mode (CKE = 0) ..................................... 222
UxSTA (UARTx Status and Control)......................... 164 SPIx Slave Mode (CKE = 1) ..................................... 223
Reset Timer1, 2, 3, 4, 5, 6, 7, 8, 9 External Clock .............. 216
Illegal Opcode ....................................................... 59, 66 Timing Requirements
Trap Conflict.......................................................... 65, 66 CLKO and I/O ........................................................... 213
Uninitialized W Register........................................ 59, 66 External Clock .......................................................... 211
Reset Sequence ................................................................. 67 Input Capture............................................................ 218
Resets ................................................................................. 59 Timing Specifications
10-bit A/D Conversion Requirements ....................... 234
S 12-bit A/D Conversion Requirements ....................... 232
Serial Peripheral Interface (SPI) ....................................... 147 I2Cx Bus Data Requirements (Master Mode)........... 226
Software Reset Instruction (SWR) ...................................... 65 I2Cx Bus Data Requirements (Slave Mode)............. 228
Software Simulator (MPLAB SIM)..................................... 198 Output Compare Requirements................................ 218
Software Stack Pointer, Frame Pointer PLL Clock ................................................................. 212
CALL Stack Frame...................................................... 43 Reset, Watchdog Timer, Oscillator Start-up Timer, Pow-
Special Features of the CPU ............................................ 181 er-up Timer and Brown-out Reset Requirements...
SPI Module 215
SPI1 Register Map...................................................... 36 Simple OC/PWM Mode Requirements ..................... 219
Symbols Used in Opcode Descriptions............................. 190 SPIx Master Mode (CKE = 0) Requirements............ 220
System Control SPIx Master Mode (CKE = 1) Requirements............ 221
Register Map............................................................... 42 SPIx Slave Mode (CKE = 0) Requirements.............. 222
SPIx Slave Mode (CKE = 1) Requirements.............. 224
T Timer1 External Clock Requirements....................... 216
Temperature and Voltage Specifications Timer2, Timer4, Timer6 and Timer8 External Clock Re-
AC ............................................................................. 210 quirements........................................................ 217
Timer1 ............................................................................... 133 Timer3, Timer5, Timer7 and Timer9 External Clock Re-
Timer2/3, Timer4/5, Timer6/7 and Timer8/9 ..................... 135 quirements........................................................ 217
Timing Characteristics
CLKO and I/O ........................................................... 213 U
Timing Diagrams UART Module
10-bit A/D Conversion............................................... 233 UART1 Register Map ................................................. 36
10-bit A/D Conversion (CHPS = 01, SIMSAM = 0, ASAM Using the RCON Status Bits............................................... 66
= 0, SSRC = 000) ............................................. 233
12-bit A/D Conversion (ASAM = 0, SSRC = 000) ..... 232 V
Brown-out Situations................................................... 65 Voltage Regulator (On-Chip) ............................................ 185
External Clock........................................................... 211
I2Cx Bus Data (Master Mode) .................................. 225 W
I2Cx Bus Data (Slave Mode) .................................... 227 Watchdog Time-out Reset (WDTR).................................... 65
I2Cx Bus Start/Stop Bits (Master Mode) ................... 225 Watchdog Timer (WDT)............................................ 181, 186
I2Cx Bus Start/Stop Bits (Slave Mode) ..................... 227 Programming Considerations ................................... 186
Input Capture (CAPx)................................................ 218 WWW Address ................................................................. 248
OC/PWM................................................................... 219 WWW, On-Line Support ....................................................... 9

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 247

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

NOTES:

DS70290B-page 248 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

THE MICROCHIP WEB SITE CUSTOMER SUPPORT

Microchip provides online support via our WWW site at Users of Microchip products can receive assistance
www.microchip.com. This web site is used as a means through several channels:
to make files and information easily available to • Distributor or Representative
customers. Accessible by using your favorite Internet
• Local Sales Office
browser, the web site contains the following
information: • Field Application Engineer (FAE)
• Technical Support
• Product Support – Data sheets and errata,
application notes and sample programs, design Customers should contact their distributor,
resources, user’s guides and hardware support representative or field application engineer (FAE) for
documents, latest software releases and archived support. Local sales offices are also available to help
software customers. A listing of sales offices and locations is
• General Technical Support – Frequently Asked included in the back of this document.
Questions (FAQs), technical support requests, Technical support is available through the web site
online discussion groups, Microchip consultant at: http://support.microchip.com
program member listing
• Business of Microchip – Product selector and
ordering guides, latest Microchip press releases,
listing of seminars and events, listings of
Microchip sales offices, distributors and factory
representatives

CUSTOMER CHANGE NOTIFICATION

SERVICE
Microchip’s customer notification service helps keep
customers current on Microchip products. Subscribers
will receive e-mail notification whenever there are
changes, updates, revisions or errata related to a
specified product family or development tool of interest.
To register, access the Microchip web site at
www.microchip.com, click on Customer Change
Notification and follow the registration instructions.

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 249

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

READER RESPONSE
It is our intention to provide you with the best documentation possible to ensure successful use of your Microchip prod-
uct. If you wish to provide your comments on organization, clarity, subject matter, and ways in which our documentation
can better serve you, please FAX your comments to the Technical Publications Manager at (480) 792-4150.
Please list the following information, and use this outline to provide us with your comments about this document.

To: Technical Publications Manager Total Pages Sent ________

RE: Reader Response

From: Name
Company
Address
City / State / ZIP / Country
Telephone: (_______) _________ - _________ FAX: (______) _________ - _________
Application (optional):
Would you like a reply? Y N

Device: dsPIC33FJ32GP202/204 Literature Number: DS70290B

Questions:

1. What are the best features of this document?

2. How does this document meet your hardware and software development needs?

3. Do you find the organization of this document easy to follow? If not, why?

4. What additions to the document do you think would enhance the structure and subject?

5. What deletions from the document could be made without affecting the overall usefulness?

6. Is there any incorrect or misleading information (what and where)?

7. How would you improve this document?

DS70290B-page 250 Preliminary © 2008 Microchip Technology Inc.

 dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

PRODUCT IDENTIFICATION SYSTEM

To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office.

dsPIC 33 FJ 32 GP2 02 T E / SP - XXX Examples:

a) dsPIC33FJ32GP202-E/SP:
Microchip Trademark General-purpose dsPIC33, 32 KB
program memory, 28-pin, Extended
Architecture temp.,
Flash Memory Family SPDIP package.

Program Memory Size (KB)

Product Group
Pin Count
Tape and Reel Flag (if applicable)
Temperature Range
Package
Pattern

Architecture: 33 = 16-bit Digital Signal Controller

Flash Memory Family: FJ = Flash program memory, 3.3V

Product Group: GP2 = General purpose family

GP3 = General purpose family

Pin Count: 02 = 28-pin

03 = 44-pin

Temperature Range: I = -40°C to +85°C (Industrial)

E = -40°C to +125°C (Extended)

Package: SP = Skinny Plastic Dual In-Line - 300 mil body (SPDIP)

SO = Plastic Small Outline - Wide - 7.5 mm body (SOIC)
ML = Plastic Quad, No Lead Package - 8x8 mm body (QFN)
PT = Plastic Thin Quad Flatpack - 10x10x1 mm body (TQFP)
MM = Plastic Quad, No Lead Package - 6x6 mm body (QFN-S)

© 2008 Microchip Technology Inc. Preliminary DS70290B-page 251

 Worldwide Sales and Service
AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE
Corporate Office Asia Pacific Office India - Bangalore Austria - Wels
2355 West Chandler Blvd. Suites 3707-14, 37th Floor Tel: 91-80-4182-8400 Tel: 43-7242-2244-39
Chandler, AZ 85224-6199 Tower 6, The Gateway Fax: 91-80-4182-8422 Fax: 43-7242-2244-393
Tel: 480-792-7200 Harbour City, Kowloon India - New Delhi Denmark - Copenhagen
Fax: 480-792-7277 Hong Kong Tel: 45-4450-2828
Tel: 91-11-4160-8631
Technical Support: Tel: 852-2401-1200 Fax: 45-4485-2829
Fax: 91-11-4160-8632
http://support.microchip.com
Fax: 852-2401-3431 France - Paris
Web Address: India - Pune
Australia - Sydney Tel: 91-20-2566-1512 Tel: 33-1-69-53-63-20
www.microchip.com
Tel: 61-2-9868-6733 Fax: 91-20-2566-1513 Fax: 33-1-69-30-90-79
Atlanta Fax: 61-2-9868-6755
Duluth, GA Japan - Yokohama Germany - Munich
China - Beijing Tel: 81-45-471- 6166 Tel: 49-89-627-144-0
Tel: 678-957-9614
Tel: 86-10-8528-2100 Fax: 49-89-627-144-44
Fax: 678-957-1455 Fax: 81-45-471-6122
Fax: 86-10-8528-2104 Italy - Milan
Boston Korea - Daegu
China - Chengdu Tel: 39-0331-742611
Westborough, MA Tel: 82-53-744-4301
Tel: 86-28-8665-5511 Fax: 82-53-744-4302 Fax: 39-0331-466781
Tel: 774-760-0087
Fax: 86-28-8665-7889 Netherlands - Drunen
Fax: 774-760-0088 Korea - Seoul
China - Hong Kong SAR Tel: 82-2-554-7200 Tel: 31-416-690399
Chicago
Itasca, IL Tel: 852-2401-1200 Fax: 82-2-558-5932 or Fax: 31-416-690340
Tel: 630-285-0071 Fax: 852-2401-3431 82-2-558-5934 Spain - Madrid
Fax: 630-285-0075 China - Nanjing Tel: 34-91-708-08-90
Malaysia - Kuala Lumpur
Tel: 86-25-8473-2460 Fax: 34-91-708-08-91
Dallas Tel: 60-3-6201-9857
Addison, TX Fax: 86-25-8473-2470 Fax: 60-3-6201-9859 UK - Wokingham
Tel: 972-818-7423 China - Qingdao Tel: 44-118-921-5869
Malaysia - Penang
Fax: 972-818-2924 Tel: 86-532-8502-7355 Fax: 44-118-921-5820
Tel: 60-4-227-8870
Detroit Fax: 86-532-8502-7205 Fax: 60-4-227-4068
Farmington Hills, MI China - Shanghai Philippines - Manila
Tel: 248-538-2250 Tel: 86-21-5407-5533 Tel: 63-2-634-9065
Fax: 248-538-2260 Fax: 86-21-5407-5066 Fax: 63-2-634-9069
Kokomo China - Shenyang Singapore
Kokomo, IN Tel: 86-24-2334-2829 Tel: 65-6334-8870
Tel: 765-864-8360 Fax: 86-24-2334-2393 Fax: 65-6334-8850
Fax: 765-864-8387
China - Shenzhen Taiwan - Hsin Chu
Los Angeles Tel: 86-755-8203-2660 Tel: 886-3-572-9526
Mission Viejo, CA Fax: 86-755-8203-1760 Fax: 886-3-572-6459
Tel: 949-462-9523
China - Wuhan Taiwan - Kaohsiung
Fax: 949-462-9608
Tel: 86-27-5980-5300 Tel: 886-7-536-4818
Santa Clara Fax: 86-27-5980-5118 Fax: 886-7-536-4803
Santa Clara, CA
China - Xiamen Taiwan - Taipei
Tel: 408-961-6444
Tel: 86-592-2388138 Tel: 886-2-2500-6610
Fax: 408-961-6445
Fax: 86-592-2388130 Fax: 886-2-2508-0102
Toronto
China - Xian Thailand - Bangkok
Mississauga, Ontario,
Tel: 86-29-8833-7252 Tel: 66-2-694-1351
Canada
Tel: 905-673-0699 Fax: 86-29-8833-7256 Fax: 66-2-694-1350
Fax: 905-673-6509 China - Zhuhai
Tel: 86-756-3210040
Fax: 86-756-3210049

01/02/08

DS70290B-page 252 Preliminary © 2008 Microchip Technology Inc.