SLS-04005B

Effective 10-08

Scrubber Level Control System Catalog Section 15 & 50

(00-02-0562)

FWMurphy

SLS System – Automatic Level Control for Gas Scrubber Applications

The Murphy Gas Compressor Scrubber Level System (SLS)

High Level Shutdown Switch

The system provides for liquid control in
Stainless steel float actuated level switches to alarm and/or
gas scrubber applications, by dumping shutdown the equipment.
liquids to drain and protecting
LS200: 2” NPT pipe connection; Rated 2000 psi (13.7MPa)
compressors with a high liquid level
[137bar]; Class I, Division 1. SPDT snap-switch standard. DPDT
switch. Wetted metal parts are made to Optional.
survive constant use in corrosive All Stainless Steel available.
environments.

Filter/Regulator &
MURPHYGAGE®
1 Control
3 Panel
“Instrument
Quality Air/Gas
Supply”
4 2
Pneumatic Level Control
Float actuated level snap-acting switch controls
pneumatic pressure to open and close dump valve. Pneumatic Dump
LS200NDVOR: Dump Valve Operator, pressure Valves See DVU-01069B
regulator, and pressure indicating MURPHYGAGE.® for more details.
Two piece union design with manual valve operator allows soft
plug and hard seat to be replaced without disassembling outlet
piping or scrubber pipe connection. Diaphragm actuated valves
operate on 30-70 psi (207-483 kPa; 2-5 bar).

n Designed for Harsh Gas Compressor Scrubber Applications

You Save Money By Purchasing The SLS System n 304 Stainless Steel Float Operates in 0.5 Specific Gravity and
Heavier Fluids
n Rated for Up To 2000 psi (13.8 MPa) [138 bar] Working Pressure
Which Includes the Following:
n Electric and Pneumatic Models Available
1) LS200 High Level Shutdown Switch
2) DVU2120 Pneumatic Dump Valve n Improved Design Provides Better Snap Action and
3) LS200NDVOR Pneumatic Level Control with: Dependability with Reduced Number of Moving Parts
4) Filter Regulator with MURPHYGAGE®. n For Separators/Scrubbers to 2000 psi (13.8 MPa) [138 bar]
Vessel Pressure
n Hex Union Allows Plug and Seat Replacement Without
For detailed information on Level Switches see LS-04004B and for
Dump Valves see DVU-01069B.
Piping Removal
n Operates on 30–70 psi (207–483 kPa) [2.07–4.83 bar]
Service Tip
The MURPHYGAGE® and Filter/Regulator on the LS200NDVOR help keep the
control medium clean and dry. It also allows operator to adjust pressure to Control Pressure
n Manual Valve Operator
recommended level of 30-70 psig. The MURPHYGAGE® and Filter/Regulator are
recommended to help increase system life and trouble free operation.
For other options see the “How to Order” matrix.
Warranty
A limited warranty on materials and workmanship is given with this FWMurphy product.
A copy of the warranty may be viewed or printed by going to www.fwmurphy.com/warranty.asp.
SLS-04005B page 1 of 2
 How to Order the SLS Series System Accessories
Build a complete model number using the diagram below.
Float Chamber 15051098
3 in.
SLS - ___ 1-11.5 NPT (2 places) (76 mm)

2-11.5 NPT
Options
LR = Less regulator 10.5 in.
(266 mm)
3 in.
(76 mm)

Base Models SLS2120 is the standard model in stock. 1/2-20 UNF-2B

Maximum (4 places)
3-1/2
Model Dump Valve Inlet Outlet Trim Size Working press. 7.55 in. 3.5 in.
(89 m

(192 mm) (89 mm) Operating Pressure: 2000 psi

7.01 in.
SLS2120: DVU2120 2 NPT 1 NPT 0.436 in. (11mm) 2000 psi (179 mm) (13.8 MPa) [138 bar]
Material: Cast Steel, WCB
SLS2115: DVU2115 2 NPT 1 NPT 0.576 in. (15mm) 1500 psi Operating Temperature:
Shipping Weight: 32 lb. ( 14.5kg). 400°F (204°C)
SLS2105: DVU2105 2 NPT 1 NPT 0.859 in. (22mm) 500 psi
SLS175: DVU175 1 NPT 3/4 NPT 0.359 in. (9mm) 1800 psi Weld Collar (LS200 only) 15050375
SLS150: DVU150 1 NPT 1/2 NPT 0.359 in. (9mm) 1800 psi 2 NPT
Operating
Pressure:
Approximate Shipping Weights/Dimensions 2-7/8 in
2000 psi (13.8
SLS2120: 19 lb. 6 oz. (8.7 kg). (73 mm) MPa) [138 bar]
3-5/8 in.
(92 mm) Operating
SLS2120: 15 x 15 x 12 in. (381 x 381 x 305 mm). Temperature:
400°F (204°C)
4-1/2 in
Dimensions A (114 mm)
Shipping Weight: 6 lb. ( 2.7kg).
Material: ASTM A105-2
UNS K03504
2.5 in. (64 mm) Hex B
LS200 and
L1100 ø2.19 in.
Float Shaft Extension 15000478
(56 mm) C D 12-24 UNC

LS200 L1100 1/2 NPT E

A 10.16 in. (258 mm) 11 in. (279 mm) 12-24 UNC

B 3.44 in. (87 mm) 3.50in. (189mm) 3.63 in. (92 mm) 1 in 3/8 in
(25 mm) (10 mm)
C ø1.75 in. (44 mm) ø1.56 in. (40 mm)
D 2.80 in. (71 mm) 3.4 in. (71 mm) Material: AISI 303, UNS-S30300
E 2 NPT 1-1/2 NPT NOTE: The extension is used with the LS200 only. One extension is
supplied with each unit. Use of additional extensions is not recommended
as they reduce the ability of the unit to operate for the stated specific gravity.
LS200N, LS200NDVO &LS200NDVOR
w/ Dump Valve Operator, Filter/ A
Pressure Regulator & Gage 20BPG-75
Regulator
G Pressure
Manual Valve Dump Valve
Operator
Pressure Gage Nipple Inlet Port DVU2120
Supply Exhaust
1/8 NPT
x 1/8 NPT
DVU2120
A 7.5 in. (191mm) 2 NPT to 1 NPT
Vent
B Adaptor
TOP VIEW B 8.0 in. (203mm)
DVO Weep Hole Valve Open/Closed Bushing
Union Indicator Button C 2.85 in. (70mm)
Manual 55050617
Valve D 1.0 in. (25mm) available for
Operator Signal out 3.53 in. Regulator/Gage
Assembly E 2-11.5 NPT SLS150 and
(90 mm) 4.59 in. F 1-11.5 NPT SLS175
(117 mm) F Drain versions
Connection C G 1.03 in. (26mm)

E D
ø2.19 in. 3.30 in. (84 mm) min.
ø1.75 in. clearance required for
(56 mm) (44 mm) float movement.
Plug Seal G (dimension shown
for reference only)
LS200N
Model A B C D E F G
2" 11-1/2 NPT 3.44 in. DVU2115 7.50 (191) 8.0 (203) 2.75 (70) 1.0 (25) 2-11.5 NPT 1-11.5 NPT 1.03
3/8 NPT (87 mm) DVU2105 7.50 (191) 8.0 (203) 2.75 (70) 1.0 (25) 2-11.5 NPT 1-11.5 NPT 1.03
exhaust 3.73 in.
(95 mm) DVU175 7.50 (191) 6.75 (171) 2.06 (52) 1.0 (25) 1-11.5 NPT 3/4”-14 NPT .84 (21)
8.49 in. (216 mm) DVU150 7.50 (191) 6.75 (171) 2.06 (52) 1.0 (25) 1-11.5 NPT 1/2”-14 NPT .84 (21)
NOTE: Dimensions are in inches and (millimeters)
FW MURPHY FRANK W. MURPHY, LTD FW MURPHY INSTRUMENTS (HANGZHOU) CO. LTD
P.O. Box 470248 Church Rd Laverstock 77 23rd Street
Tulsa, Oklahoma 74147 USA Salisbury SP1 1QZ UK Hangzhou Economic & Technological Development Area
+1 918 317 4100 Fax: +1 918 317 4266 Phone: +44 172 241 0055 Fax: +44 172 241 0088 Hangzhou, Zhejiang 310018 China
E-mail: [email protected] E-mail: [email protected] Phone: +86 571 8788 6060 Fax: +86 571 8684 8878
INDUSTRIAL PANEL DIVISION Web site: www.fwmurphy.co.uk FW MURPHY INTERNATIONAL TRADING (SHANGHAI) CO., LTD.
Fax: +1 918 317 4124 COMPUTRONIC CONTROLS, LTD Suite 1704, Tower B, City Center of Shanghai; 100 Zunyi Road
E-mail: [email protected] 41 - 43 Railway Terrace Shanghai, 200051 China
MURPHY POWER IGNITION Nechells, Birmingham B7 5NG UK Phone: +86 21 6237 2082 Fax: +86 21 6237 2083
Web site: www.murphy-pi.com Phone: +44 121 327 8500 Fax: +44 121 327 8501 Web site: [email protected]
E-mail: [email protected]
CONTROL SYSTEMS & SERVICES DIVISION Web site: www.computroniccontrols.com
P.O. Box 1819
Rosenberg, Texas 77471 USA
Phone: +1 281 633 4500 Fax: +1 281 633 4588 www.fwmurphy.com Printed in U.S.A.
E-mail: [email protected] SLS-04005B page 2 of 2