Scribd
Upload
18 views

Codigos

The document contains 4 code snippets that control the output of LEDs connected to Arduino pins. Each code snippet defines integer variables for pin assignments, a setup function to set the pins as outputs, and a loop function that turns the LEDs on and off in sequences, with delay times between changes.

Uploaded by

Juan Rodriguez
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
18 views

Codigos

The document contains 4 code snippets that control the output of LEDs connected to Arduino pins. Each code snippet defines integer variables for pin assignments, a setup function to set the pins as outputs, and a loop function that turns the LEDs on and off in sequences, with delay times between changes.

Uploaded by

Juan Rodriguez
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 11

Codigo 1:

int led1 = 2;
int led2 = 3;
int led3 = 4;
int led4 = 5;
int led5 = 6;
int led6 = 7;
int led7 = 8;
int led8 = 9;

void setup()
{
pinMode(led1, OUTPUT);
pinMode(led2, OUTPUT);
pinMode(led3, OUTPUT);
pinMode(led4, OUTPUT);
pinMode(led5, OUTPUT);
pinMode(led6, OUTPUT);
pinMode(led7, OUTPUT);
pinMode(led8, OUTPUT);
}

void loop(){
for(byte s1 = 0; s1 < 12; s1++)
{
digitalWrite(led1, HIGH);
digitalWrite(led2, HIGH);
digitalWrite(led3, HIGH);
digitalWrite(led4, HIGH);

delay(1000);

digitalWrite(led1, LOW);
digitalWrite(led2, LOW);
digitalWrite(led3, LOW);
digitalWrite(led4, LOW);

digitalWrite(led5, HIGH);
digitalWrite(led6, HIGH);
digitalWrite(led7, HIGH);
digitalWrite(led8, HIGH);

delay(1000);

digitalWrite(led3, LOW);
digitalWrite(led4, LOW);
digitalWrite(led7, LOW);
digitalWrite(led8, LOW);

digitalWrite(led1, HIGH);
digitalWrite(led2, HIGH);
digitalWrite(led5, HIGH);
digitalWrite(led6, HIGH);

delay(500);
digitalWrite(led1, LOW);
digitalWrite(led2, LOW);
digitalWrite(led5, LOW);
digitalWrite(led6, LOW);

digitalWrite(led3, HIGH);
digitalWrite(led4, HIGH);
digitalWrite(led7, HIGH);
digitalWrite(led8, HIGH);

delay(500);

digitalWrite(led3, LOW);
digitalWrite(led4, LOW);
digitalWrite(led5, LOW);
digitalWrite(led6, LOW);

digitalWrite(led1, HIGH);
digitalWrite(led2, HIGH);
digitalWrite(led7, HIGH);
digitalWrite(led8, HIGH);

delay(2000);

digitalWrite(led1, LOW);
digitalWrite(led2, LOW);
digitalWrite(led7, LOW);
digitalWrite(led8, LOW);
digitalWrite(led3, HIGH);
digitalWrite(led4, HIGH);
digitalWrite(led5, HIGH);
digitalWrite(led6, HIGH);

delay(2000);

}
}

Codigo 2

int led1 = 2;
int led2 = 3;
int led3 = 4;
int led4 = 5;
int led5 = 6;
int led6 = 7;
int led7 = 8;
int led8 = 9;
int led9 = 10;

void setup()
{
pinMode(led1, OUTPUT);
pinMode(led2, OUTPUT);
pinMode(led3, OUTPUT);
pinMode(led4, OUTPUT);
pinMode(led5, OUTPUT);
pinMode(led6, OUTPUT);
pinMode(led7, OUTPUT);
pinMode(led8, OUTPUT);
pinMode(led9, OUTPUT);
}

void loop() {
for(byte s2 = 0; s2 < 12; s2++)
{
digitalWrite(led1, HIGH);
digitalWrite(led2, HIGH);
digitalWrite(led3, HIGH);
digitalWrite(led4, HIGH);
digitalWrite(led5, LOW);
digitalWrite(led6, HIGH);
digitalWrite(led7, HIGH);
digitalWrite(led8, HIGH);
digitalWrite(led9, HIGH);

delay(500);

digitalWrite(led1, HIGH);
digitalWrite(led2, LOW);
digitalWrite(led3, HIGH);
digitalWrite(led4, LOW);
digitalWrite(led5, HIGH);
digitalWrite(led6, LOW);
digitalWrite(led7, HIGH);
digitalWrite(led8, LOW);
digitalWrite(led9, HIGH);

delay(500);

digitalWrite(led1, HIGH);
digitalWrite(led2, HIGH);
digitalWrite(led3, HIGH);
digitalWrite(led4, HIGH);
digitalWrite(led5, HIGH);
digitalWrite(led6, HIGH);
digitalWrite(led7, HIGH);
digitalWrite(led8, HIGH);
digitalWrite(led9, HIGH);

delay(500);

digitalWrite(led1, HIGH);
digitalWrite(led2, HIGH);
digitalWrite(led3, HIGH);
digitalWrite(led4, LOW);
digitalWrite(led5, LOW);
digitalWrite(led6, LOW);
digitalWrite(led7, HIGH);
digitalWrite(led8, HIGH);
digitalWrite(led9, HIGH);

delay(500);

digitalWrite(led1, LOW);
digitalWrite(led2, LOW);
digitalWrite(led3, LOW);
digitalWrite(led4, HIGH);
digitalWrite(led5, HIGH);
digitalWrite(led6, HIGH);
digitalWrite(led7, LOW);
digitalWrite(led8, LOW);
digitalWrite(led9, LOW);

delay(500);
}
}

Codigo 3

int led4 = 2;
int led3 = 3;
int led2 = 4;
int led1 = 5;

void setup()
{
pinMode(led4, OUTPUT);
pinMode(led3, OUTPUT);
pinMode(led2, OUTPUT);
pinMode(led1, OUTPUT);
}

void loop() {
for ( byte s3 = 0; s3 < 5; s3++)
{
digitalWrite(led4, LOW);
digitalWrite(led3, LOW);
digitalWrite(led2, LOW);
digitalWrite(led1, LOW);

delay(1000);

digitalWrite(led4, LOW);
digitalWrite(led3, LOW);
digitalWrite(led2, LOW);
digitalWrite(led1, HIGH);

delay(1000);

digitalWrite(led4, LOW);
digitalWrite(led3, LOW);
digitalWrite(led2, HIGH);
digitalWrite(led1, LOW);

delay(1000);
digitalWrite(led4, LOW);
digitalWrite(led3, LOW);
digitalWrite(led2, HIGH);
digitalWrite(led1, HIGH);

delay(1000);

Codigo 4

int led4 = 2;
int led3 = 3;
int led2 = 4;
int led1 = 5;

void setup()
{
pinMode(led4, OUTPUT);
pinMode(led3, OUTPUT);
pinMode(led2, OUTPUT);
pinMode(led1, OUTPUT);
}

void loop() {
for ( byte s4 = 0; s4 < 5; s4++)
{
digitalWrite(led4, LOW);
digitalWrite(led3, LOW);
digitalWrite(led2, LOW);
digitalWrite(led1, LOW);

delay(1000);

digitalWrite(led4, LOW);
digitalWrite(led3, LOW);
digitalWrite(led2, LOW);
digitalWrite(led1, HIGH);

delay(1000);

digitalWrite(led4, LOW);
digitalWrite(led3, LOW);
digitalWrite(led2, HIGH);
digitalWrite(led1, HIGH);

delay(1000);

digitalWrite(led4, LOW);
digitalWrite(led3, LOW);
digitalWrite(led2, HIGH);
digitalWrite(led1, LOW);
delay(1000);

You might also like