Errata List, May 2002

AISC Design Guide No. 15

AISC Rehabilitation and Retrofit Guide
A Reference for Historic Shapes and Specifications

The following corrections are needed. The user may find it convenient in
some cases to hand-write a correction; in others, a cut-and-paste approach
may be more efficient.

15
Steel Design Guide Series

AISC Rehabilitation and Retrofit Guide

A Reference for Historic Shapes and Specifications
Page 22, Table 2.1.1 is to be replaced with the following:

Table 2.1.1 Dimensions and Primary Properties -- Steel Sections 1971-2000

Flange Flange
Wt. Area Depth Web Thickness Width Thickness Distance
Desig- per ft A d d tw tw t w /2 bf bf tf tf T k k1
nation lb in.2 in. in. in. in. in. in. in. in. in. in. in. in.

W44x285 285 83.8 44.02 44 1.024 1 1/2 11.811 11 3/4 1.772 1 3/4 38 5/8 2 11/16 1 3/8
W44x248 248 72.8 43.62 43 5/8 0.865 7/8 7/16 11.811 11 3/4 1.575 1 9/16 48 5/8 2 1/2 1 5/16
W44x224 224 65.8 43.31 43 1/4 0.787 13/16 7/16 11.811 11 3/4 1.416 1 7/16 48 5/8 2 5/16 1 5/16
W44x198 198 58.0 42.91 42 7/8 0.709 11/16 3/8 11.811 11 3/4 1.220 1 1/4 48 5/8 2 1/8 1 1/4

W40x655 655 192 43.62 43 5/8 1.970 2 1 16.870 16 7/8 3.540 3 9/16 33 3/4 4 15/16 2 1/4
W40x531 531 156 42.34 42 3/8 1.610 1 5/8 13/16 16.510 16 1/2 2.910 2 15/16 33 3/4 4 5/16 2
W40x480 480 140 41.81 41 3/4 1.460 1 7/16 3/4 16.360 16 3/8 2.640 2 5/8 33 3/4 4 2
W40x466 466 137 42.44 42 7/16 1.670 1 11/16 13/16 12.640 12 5/8 2.950 2 15/16 34 3/16 4 1/8 2
W40x436 436 128 41.34 41 3/8 1.340 1 5/16 11/16 16.240 16 1/4 2.400 2 3/8 33 3/4 3 13/16 1 15/16
W40x328 328 96.4 40.00 40 0.910 15/16 1/2 17.910 17 7/8 1.730 1 3/4 33 3/4 3 1/8 1 11/16
W40x321 321 94.1 40.08 40 1/16 1.000 1 1/2 15.910 15 7/8 1.770 1 3/4 34 3/16 2 15/16 1 11/16
W40x298 298 87.6 38.69 38 3/4 0.830 13/16 7/16 17.830 17 7/8 1.575 1 9/16 33 3/4 3 1 5/8
W40x268 268 78.8 39.37 39 3/8 0.750 3/4 3/8 17.750 17 3/4 1.415 1 7/16 33 3/4 2 13/16 1 9/16
W40x244 244 71.7 39.06 39 0.710 11/16 3/8 17.710 17 3/4 1.260 1 1/4 33 3/4 2 5/8 1 9/16
W40x221 221 64.8 38.67 38 5/8 0.710 11/16 3/8 17.710 17 3/4 1.065 1 1/16 33 3/4 2 7/16 1 9/16
W40x192 192 56.5 38.20 38 1/4 0.710 11/16 3/8 17.710 17 3/4 0.830 13/16 33 3/4 2 1/4 1 9/16
W40x174 174 51.1 38.20 38 1/4 0.650 5/8 5/16 15.750 15 3/4 0.830 13/16 34 3/16 2 1 1/2

W36x848 848 249 42.45 42 1/2 2.520 2 1/2 1 1/4 18.130 18 1/8 4.530 4 1/2 31 1/8 5 11/16 2 1/4
W36x720 720 211 41.19 41 1/4 2.165 2 3/16 1 1/8 17.775 17 3/4 3.900 3 7/8 31 1/8 5 1/16 2 1/16
W36x588 588 172 39.84 39 7/8 1.790 1 13/16 1 17.400 17 3/8 3.230 3 1/4 31 1/8 4 3/8 1 7/8
W36x485 485 142 38.74 38 3/4 1.500 1 1/2 3/4 17.105 17 1/8 2.680 2 11/16 31 1/8 3 13/16 1 3/4

W33x619 619 181 38.47 38 1/2 1.970 2 1 16.910 16 7/8 3.540 3 9/16 29 3/4 4 3/8 1 3/4
W33x567 567 166 37.91 37 7/8 1.810 1 13/16 1 16.750 16 3/4 3.270 3 1/4 29 3/4 4 1/16 1 11/16
W33x515 515 151 37.36 37 3/8 1.650 1 5/8 13/16 16.590 16 5/8 2.990 3 29 3/4 3 13/16 1 5/8
W33x468 468 137 36.81 36 3/4 1.520 1 1/2 3/4 16.455 16 1/2 2.720 2 3/4 29 3/4 3 1/2 1 9/16
W33x424 424 124 36.34 36 3/8 1.380 1 3/8 11/16 16.315 16 3/8 2.480 2 1/2 29 3/4 3 5/16 1 7/16
W33x387 387 113 35.95 36 1.260 1 1/4 5/8 16.200 16 1/4 2.280 2 1/4 29 3/4 3 1/8 1 3/8

W30x581 581 170 35.39 35 3/8 1.970 2 1 16.200 16 1/4 3.540 3 9/16 26 3/4 4 5/16 1 11/16
W30x526 526 526 34.76 34 3/4 1.790 1 13/16 1 16.020 16 3.230 3 1/4 26 3/4 4 1 5/8
W30x433 433 127 33.66 33 5/8 1.500 1 1/2 3/4 15.725 15 3/4 2.680 2 11/16 26 3/4 3 7/16 1 1/2
W30x357 357 104 32.80 32 3/4 1.240 1 1/4 5/8 15.470 15 1/2 2.240 2 1/4 26 3/4 3 1 3/8
W30x477 477 140 34.21 34 1/4 1.630 1 5/8 13/16 15.865 15 7/8 2.950 3 26 3/4 3 3/4 1 9/16

W27x494 494 145 31.97 32 1.810 1 13/16 1 15.095 15 1/8 3.270 3 1/4 24 4 1 9/16
W27x448 448 131 31.42 31 3/8 1.650 1 5/8 13/16 14.940 15 2.990 3 24 3 11/16 1 1/2
W27x407 407 119 30.87 30 7/8 1.520 1 1/2 3/4 14.800 14 3/4 2.720 2 3/4 24 3 7/16 1 7/16

W24x492 492 144 29.65 29 5/8 1.970 2 1 14.115 14 1/8 3.540 3 9/16 21 4 5/16 1 9/16
W24x450 250 132 29.09 29 1/8 1.810 1 13/16 1 13.955 14 3.270 3 1/4 21 4 1/16 1 1/2
W24x408 408 119 28.54 28 1/2 1.650 1 5/8 13/16 13.800 13 3/4 2.990 3 21 3 3/4 1 3/8

W21x402 402 118 26.02 26 1.730 1 3/4 7/8 13.405 13 3/8 3.130 3 1/8 18 1/4 3 7/8 1 7/16
W21x364 364 107 25.47 25 1/2 1.590 1 9/16 13/16 13.265 13 1/4 2.850 2 7/8 18 1/4 3 5/8 1 3/8
W21x333 333 97.9 25.00 25 1.460 1 7/16 3/4 13.130 13 1/8 2.620 2 5/8 18 1/4 3 3/8 1 5/16
W21x300 300 88.2 24.53 24 1/2 1.320 1 5/16 11/16 12.990 13 2.380 2 3/8 18 1/4 3 1/8 1 1/4
W21x275 275 80.8 24.13 24 1/8 1.220 1 1/4 5/8 12.890 12 7/8 2.190 2 3/16 18 1/4 3 1 3/16
W21x248 248 72.8 23.74 23 3/4 1.100 1 1/8 9/16 12.775 12 3/4 1.990 2 18 1/4 2 3/4 1 1/8
W21x223 223 65.4 23.35 23 3/8 1.000 1 1/2 12.675 12 5/8 1.790 1 13/16 18 1/4 2 9/16 1 1/16

W18x311 311 91.5 22.32 22 3/8 1.520 1 1/2 3/4 12.005 12 2.740 2 3/4 15 1/2 3 7/16 1 3/16
W18x283 283 83.2 21.85 21 7/8 1.400 1 3/8 11/16 11.890 11 7/8 2.500 2 1/2 15 1/2 3 3/16 1 3/16
W18x258 258 75.9 21.46 21 1/2 1.280 1 1/4 5/8 11.770 11 3/4 2.300 2 5/16 15 1/2 3 1 1/8
W18x234 234 68.8 21.06 21 1.160 1 3/16 5/8 11.650 11 5/8 2.110 2 1/8 15 1/2 2 3/4 1
W18x211 211 62.1 20.67 20 5/8 1.060 1 1/16 9/16 11.555 11 1/2 1.910 1 15/16 15 1/2 2 9/16 1
W18x192 192 56.4 20.35 20 3/8 0.960 1 1/2 11.455 11 1/2 1.750 1 3/4 15 1/2 2 7/16 15/16

M14x18 18 5.10 14.00 14 0.215 3/16 1/8 4.000 4 0.270 1/4 12 3/4 5/8 -
M6x20 20 5.89 6.00 6 0.250 1/4 1/8 5.938 6 0.379 3/8 4 1/4 7/8 -
M4x13 13 3.81 4.00 4 0.254 1/4 1/8 3.940 4 0.371 3/8 2 3/8 13/16 -

S7x20 20 5.88 7.00 7 0.450 7/16 1/4 3.860 3 7/8 0.392 3/8 5 1/8 15/16 -
S7x15.3 15.3 4.50 7.00 7 0.252 1/4 1/8 3.662 3 5/8 0.392 3/8 5 1/8 15/16 -
S5x14.75 14.75 4.34 5.00 5 0.494 1/2 1/4 3.284 3 1/4 0.326 5/16 3 3/8 13/16 -

HP13x100 100 29.4 13.15 13 1/8 0.765 3/4 3/8 13.205 13 1/4 0.765 3/4 10 1/4 1 7/16 1
HP13x87 87 25.5 12.95 13 0.665 11/16 3/8 13.105 13 1/8 0.665 11/16 10 1/4 1 3/8 15/16
HP13x73 83 21.6 12.75 12 3/4 0.565 9/16 5/16 13.005 13 0.565 9/16 10 1/4 1 1/4 15/16
HP13x60 60 17.5 12.54 12 1/2 0.460 7/16 1/4 12.900 12 7/8 0.460 7/16 10 1/4 1 1/8 7/8

22
ERRATA / DESIGN GUIDE NO. 15: AISC REHABILITATION AND RETROFIT GUIDE PAGE 1
Page 21 Change the heading “Properties of Beams and Columns 1873 -
2000” to read “Properties of Discontinued Beams and Columns
1873-2000”
WF Shapes have been listed using the newer W designation.

ERRATA / DESIGN GUIDE NO. 15: AISC REHABILITATION AND RETROFIT GUIDE PAGE 2
Before Page 188, Insert the following page:

2.3.3b Producers - Beams (Steel) WF Regular and Special

Depth 36 33 30 28 27 26 24 22
Reference Mill Year Mill Year Mill Year Mill Year Mill Year Mill Year Mill Year Mill Year
1 B36a 36x16-1/2 S34 1930 S34 1930 S34 1930 S43 1933 S40 1931 B 1907 S10 1921
B36 36x12 S35 1930 S35 1930 S35 1930 S47 1934 S12 1922
S43 1933 S51 1938 S15 1924
S47 1934 S53 1943 S16 1925
36WF(B36a) 36x16-1/2 S54 1946 S18 1926
36WF(B36) 36x12 S56 1948
S51 1938
S53 1943
S54 1946
S56 1948
2 G36 S40 1931 S40 1931 B 1907 S43 1933 S27 1928 S3 1909 S24 1927
S29 1928 S47 1934 S35 1930 S4 1911
S34 1930 S51 1938
S35 1930 S53 1943
G36,36X16-1/2
S40 1931
3 S43 1933 S29 1928 S27 1928 S3 1909 S54 1946 B 1907 S3 1909 S27 1927
S47 1934 S34 1930 S34 1930 S4 1911 S56 1948 S4 1911 S29 1928
S51 1938 S35 1930 S35 1930 S12 1922 S35 1930
S53 1943 S15 1924

4 S54 1946 B33a 33x15-3/4 B30a, 30x15 G 28 C 1913 S3 1909 S10 1921 S27 1928
S56 1948 B33, 33x11-1/2 B30, 30x10-1/2 B 28 C 1915 S4 1911 S12 1922 S34 1930
S43 1933 S43 1933 S27 1928 S15 1924 S35 1930
S47 1934 S47 1934 S34 1930 S16 1925
33WF (B33a) 33x15-3/4 30WF (B30a) 30x15 S35 1930 S18 1926
33WF (B33) 33x11-1/2 30WF (B30) 30x10-1/2 G28, 28x14-1/4
S51 1938 S51 1938 B28, 28x10
S53 1943 S53 1943 S40 1931
S54 1946 S54 1946
S56 1948 S56 1948
5 S29 1928 B33a 33x15-3/4 B 1907 S12 1922 C 1916 S12 1922 S12 1922 S24 1927
B33, 33x11-1/2 S15 1924 C 1917 S15 1924 S15 1924 S27 1928
S43 1933 S16 1925 C 1919 S16 1925 S16 1925 S34 1930
S47 1934 S18 1926 C 1920 S18 1926 S18 1926 S35 1930
33WF (B33a) 33x15-3/4 C 1921
33WF (B33) 33x11-1/2 C 1923
S51 1938
S53 1943

6 S29 1928 S29 1928 B30a, 30x15 S40 1931 CB 272 S24 1927 S12 1922 S34 1930
S34 1930 S43 1933 CB 271 S27 1928 S15 1924 S35 1930
S35 1930 S47 1934 C 1927 S35 1930
30WF (B30a) 30x15 C 1928
S51 1938 C 1929
S53 1943 CB 272, 27x14
CB 271, 27x9-3/4
C 1930

7 S34 1930 S54 1946 S3 1909 S27 1928 CB 272 S15 1924 S40 1931
S35 1930 S56 1948 S4 1911 S34 1930 C 1927 S16 1925
S35 1930 C 1928 S18 1926
C 1929
CB272, 27x14
C 1930
C 1931
8 S40 1931 CB332 S12 1922 S24 1927 CB 271 S12 1922 S16 1925
CB331 S15 1924 C 1928 S18 1926
C,SP 1929 S16 1925 C 1929
C 1929 S18 1926 CB271, 27x9-3/4
CB332, 33x16 C 1930
CB331, 33x12
C 1930

9 S40 1931 C 1931 S24 1927 S15 1924 CB 271 S24 1927
IL 1932 S16 1925 C 1929
S18 1926 CB271, 27x9-3/4
C 1930

10 C 1931 CB 332, 33x15-3/4 S15 1924 G28 CB272N, 27x14 S27 1928
IL 1932 CB 331, 33x11-1/2 S16 1925 B28 CB271N, 27x10 S35 1930
C 1933 S18 1926 S34 1930 C 1931
C 1934 S35 1930 IL 1932
IL 1934 G28, 28x14-1/4
33WF CB332, 33x15-3/4 B28, 28x10
33WF CB331, 33x11-1/2 S40 1931
CIL 1940

ERRATA / DESIGN GUIDE NO. 15: AISC REHABILITATION AND RETROFIT GUIDE PAGE 3
Before Page 189, Insert the following page:

2.3.3b Producers - Beams (Steel) WF Regular and Special

Depth 36 33 30 28 27 26 24 22
Reference Mill Year Mill Year Mill Year Mill Year Mill Year Mill Year Mill Year Mill Year
11 CB CB S12 1922 S12 1922 CB272, 27x14 S40 1931
CB CB S15 1924 CB271, 27x10
CSP 1929 C 1933 S16 1925 C 1933
C 1929 C 1934 S18 1926 C 1934
CB362, 36x16-1/2 IL 1934 IL 1934
CB361, 36x12 33WF CB332, 33x15-3/4 27WF CB272, 27x14
C 1930 33WF CB331, 33x11-1/2 27WF CB271, 27x10
CIL 1940 CIL 1940
CIL 1946
US 1950

12 CB362, 36x16-1/2 CIL 1946 S24 1927 CB272, 27x14 B24b, 24x14
C 1933 CIL 1948 S27 1928 CB271, 27x10 B24a, 24x12
C 1934 US 1950 S34 1930 C 1933 B24, 24x9
IL 1934 S35 1930 C 1934 S43 1933
36WF, CB362, 36x16-1/2 IL 1934 S47 1934
CIL 1940 27WF CB272, 27x14 24WF(24b) 24x14
27WF CB271, 27x10 24WF(B24a) 24x12
CIL 1940 24WF(B24) 24x9
CIL 1946 S51
S53

13 CB362, 36x16-1/2 CB 302 CIL 1946 B24b, 24x14

CB361, 36x12 CB 301 CIL 1948 B24, 24x9
C 1933 C 1927 US 1950 S43 1933
C 1934 CB S47 1934
IL 1934 CB 24WF(24b) 24x14
36 WF CB362, 36x16-1/2 C 1930 24WF(B24) 24x14
36 WF CB361, 36x12 S51 1938
CIL 1940 S53 1943
CIL 1946 S54 1946
CIL 1948 S56 1948
US 1950
14 CIL 1946 C 1927 B24a, 24x12
C 1928 S43 1933
C 1929 S47 1934
C 1930 24WF(B24a) 24x12
S51 1938
S53 1943
S54 1946
S56 1948

15 CB301 & CB 302 S54 1946

C 1928 S56 1948
C 1929
CB302, 30x14
CB301, 30x10-1/2
C 1930
16 C 1931 C 1913
IL 1932 C 1915

17 CB302, 30X15 C 1916

CB301, 30x10-1/2 C 1917
C 1933 C 1919
C 1934 C 1920
IL 1934
30WF CB302, 30x15
30WF CB301, 30x10-1/2
CIL 1940
18 CB302, 30x15 C 1921
CB301, 30x10-1/2 C 1923
C 1933
C 1934
IL 1934
30WF CB302, 30x15
30WF CH301, 30x10-1/2
CIL 1940
CIL 1946
CIL 1948
US 1950
19 CB244
CB243
C 1927
CB244, 24x14
CB243, 24x12
C 1930

ERRATA / DESIGN GUIDE NO. 15: AISC REHABILITATION AND RETROFIT GUIDE PAGE 4
Before Page 190, Insert the following page:

2.3.3b Producers - Beams (Steel) WF Regular and Special

Depth 36 33 30 28 27 26 24 22
Reference Mill Year Mill Year Mill Year Mill Year Mill Year Mill Year Mill Year Mill Year
20 C 1931
IL 1932

21 CB243, 24x14
CB241, 24x9
C 1933
C 1934
IL 1933
24WFCB243, 24x14
24WFCB241, 24x9
CIL 1940

22 CB243, 24x14
CB242, 24x12
CB241, 24x9
C 1933
C 1934
IL 1934
24WF CB243, 24x14
24WF CB242, 24x12
24WF CB241, 24x9
CIL 1940
CIL 1946
CIL 1948
US 1950
23 CIL 1946
US 1950

24 IL 1914
IL 1925
25
26

ERRATA / DESIGN GUIDE NO. 15: AISC REHABILITATION AND RETROFIT GUIDE PAGE 5