Scribd
Upload
59 views

CME Network Reconfiguration

CME Poster

Uploaded by

leonardomarin
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
59 views

CME Network Reconfiguration

CME Poster

Uploaded by

leonardomarin
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Document Version: 01

Network Reconfiguration
(CME-based)

Definition WOFD-186110 Network Reconfiguration -


GBSS (basic feature)
WOFD-186210 Network Reconfiguration -
Network reconfiguration applies to WRAN (basic feature)
capacity expansion and routine Reference WOFD-186310 Network Reconfiguration -
maintenance. Data to be reconfigured Document LTE (basic feature)
includes global, radio, and device data Reconfiguration WOFD-186410 Network Reconfiguration -
about base station controllers, and Guide delivered with SingleRAN (basic feature)
device, transport, and radio data about the NE product
base stations. documentation.

Feature ID

What Functions Can Be Used to Reconfigure Data?

This is a general The device panel The CME provides The CME provides the
configuration mode. displays the scenario-specific CRM window, which
composition of wizards for objects to displays the
The CME displays all physical devices in be reconfigured. relationships between
configuration objects graphics. resources for a base
and parameters in the For example, the CME station, such as radio
navigation tree in the left This helps users view, provides dedicated frequency (RF) boards,
pane and the table in add, delete, or wizards for cell antenna ports, sectors,
the right pane. This reconfigure hardware deletion and cell sector equipment, and
helps users add, delete, device data. frequency modification. cells, in the topology
or reconfigure objects view. This helps users
and parameters. add, delete, or
reconfigure data.

Configuration Carrier resource


Device panel Configuration wizard management (CRM)
navigation tree

Introduction to Single Configuration Functions

Configuration
navigation tree

Device panel
CRM

Configuration
Wizard

Introduction to Batch Reconfiguration Functions


Users can export parameters to be By default, the CME provides an Excel file
reconfigured to a summary data file, containing a type of data such as
reconfigure data in the file, and then neighboring cell data. Users can export
import the file into the CME to data to the file, reconfigure data in the file,
implement data reconfiguration. and then import the file into the CME to
implement data reconfiguration. Users can
define the data about base stations or
base station controllers in batches.
This function allows users to select
reference data and copy the data to
other base station controllers, base
stations, cells, or channels of the same
version. Users can use some or all
Example: Users can use this function parameters in a template as
to adjust the values of the cell channel baseline parameters and apply
power to be the same for different them to NEs to be reconfigured.
channels. Note: This function can be used
Note: This function can be used to to reconfigure parameters under
reconfigure parameters under only one multiple MOs at a time.
MO each time.

Batch Configuration Data Import and Export Planned Data Import and Export

Template Application
Batch Modification Center

How Do Users Reconfigure Base Station


Controller Data?

Configuration navigation tree


Batch modification center
Template application

Include the global data about base station controllers, such as the originating
signaling point (OSP), destination signaling point (DSP), and clock.

Include cell, carrier, and neighboring cell data.

Configuration navigation tree


Planned data import and export
Device panel
Template application
Only batch configuration of cell data is
Include device parameters supported.
such as board attributes. Batch modification center
Only batch configuration of cell algorithm
Include transport parameters parameters and carrier data is supported.
such as parameters at the
physical layer, data link layer,
and transport layer.

Transport Data
Configuration navigation tree

How Do Users Reconfigure Base


Station Data?

Include basic parameters at base stations, such as the base


station name, clock type, transmission mode, and alarm attributes.

Basic Configuration navigation tree Template application


Batch modification center Batch configuration data import and export
Data
Include device parameters such as board attributes.

Device panel Template application


Batch modification center Batch configuration data import and export
Device
Data
Include transport parameters such as parameters at
the physical layer, data link layer, and transport layer.

Transport Configuration navigation tree Batch configuration data import and export
Batch modification center Configuration wizard
Data Template application
Include radio parameters such as parameters for sectors
and local cells.
CRM Radio
Batch configuration data import and export
Data

Copyright © Huawei Technologies Co., Ltd.

You might also like