Welding & Cutting Solutions

2019 Equipment Catalog

TABLE OF CONTENTS
Icons and Warranty Information . . . . . . . . . . . . . . . . . . . 2

Stick Welders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9

TIG Welders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-19

MIG: Wire Feeder/Welders . . . . . . . . . . . . . . . . . . . . . 20-29

MIG & FCAW: Industrial Welders . . . . . . . . . . . . . . . . 30-33

Multi-Process Welders . . . . . . . . . . . . . . . . . . . . . . . . . 34-44

Advanced Process Welders . . . . . . . . . . . . . . . . . . . . . 45-56

Multi-Operator Welding Systems . . . . . . . . . . . . . . . . 57-62

Engine Drives: Commercial . . . . . . . . . . . . . . . . . . . . . . 63-71

Engine Drives: Industrial . . . . . . . . . . . . . . . . . . . . . . . 72-84

Semiautomatic Wire Feeders . . . . . . . . . . . . . . . . . . 85-101

Submerged Arc & Automatic Equipment . . . . . . . . 102-118

Welding Gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119-150

Guns & Torches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151-167

Cutting Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168-183

Wire Delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184-191

Automation Solutions . . . . . . . . . . . . . . . . . . . . . . . . 192-199

Weld Fume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 200-221

Education Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . 222-234

Drive and Cable Accessories . . . . . . . . . . . . . . . . . . 235-240

Welding Safety Checklist . . . . . . . . . . . . . . . . . . . . . . . . . 241

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242-244
GENERAL INFO

Icons
Output Icons Input Icons

For constant Alternating Peak auxiliary 2-Roll Single phase 115 Volt AC 50 Hertz Engine Driven:
current stick and current welding power output Wire Feeder input power Wire feeder input power Diesel, Gas or LPG
TIG processes output input power

For constant voltage Direct current Surge auxiliary 4-Roll Three phase 42 Volt AC 60 Hertz
MIG, flux-cored and welding output power output Wire Feeder input power Wire feeder input power
subarc processes input power

For multiprocess Alternating or Continuous Single or 40 Volt DC 50/60 Hertz
constant current or direct current auxiliary power three phase Wire feeder input power
constant voltage welding output output input power input power
applications

Warranty Commitment
3 Year Warranty Quality Systems
You have a right to expect that the welding and cutting Choose welding suppliers wisely . . . look for third party
equipment, electrode and flux you purchase will be free of certifications on the companies and products you select. In
defects in workmanship and material. Standing behind the fact, some of your projects or customers may require it. Many
high quality of our products, Lincoln Electric’s warranty Lincoln Electric manufacturing sites have been inspected
commitment to its customers leads the industry in breadth and registered to the world’s ISO standards. In fact, Lincoln
and scope. Electric was the first welding manufacturer to be registered
For example, our limited warranty extends to 7 Years on to the tough ISO 9001 and 14001 standards.
many of our main power rectifiers. With few exceptions, However, there’s more. Equipment destined for harsh
all industrial welders and power sources carry a full 3 Year environments is often tested to IP21, IP23 and IP23S
Lincoln Electric warranty. Electrode, wire and flux are standards. Products intended for the Canadian market meet
warranted for 1 full year, as are environmental systems. stringent CSA (Canadian Standards Association) standards.
Electrode is tested to comply with AWS (American Welding
Extended Warranty Available Society) and often ASME Boiler Pressure codes, ABS
(American Bureau of Shipping), CWB/CSA (Canadian Welding
If you choose, you can extend the duration of the Lincoln
Bureau) and MIL qualifications. Certificates of Conformance
Electric warranty on your Lincoln Electric industrial welder
are available at our web site.
and cutting machines by two years with the Lincoln Electric
Extended Warranty. Available only in the United States and
Canada. Visit our web site for more information.

Operator Manuals and Replacement Parts Lists

Service Navigator - Electronic Parts Catalog
Quickly navigate to service documentation for a particular machine by utilizing the code number filter. Access to all the product information you
need is just a click away - operator’s manuals, parts lists and more at parts.lincolnelectric.com.

CUSTOMER ASSISTANCE POLICY

 he business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our customers and to exceed their
T
expectations. On occasion, purchasers may ask Lincoln Electric for information or advice about their use of our products. Our employees respond to inquiries to the best of their ability based on information provided to them
by the customers and the knowledge they may have concerning the application. Our employees, however, are not in a position to verify the information provided or to evaluate the engineering requirements for the particular
weldment. Accordingly, Lincoln Electric does not warrant or guarantee or assume any liability with respect to such information or advice. Moreover, the provision of such information or advice does not create, expand, or
alter any warranty on our products. Any express or implied warranty that might arise from the information or advice, including any implied warranty of merchantability or any warranty of fitness for any customers’ particular
purpose is specifically disclaimed. 
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the customer. Many variables beyond
the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.

Availability and/or specifications of products listed in this catalog are subject to change at any time without notice.

2 | www.lincolnelectric.com
STICK WELDERS
MODEL OUTPUT PROCESS INPUT FEATURES
Touch Start TIG®

Polarity Switch
(Power Rectifier)
Current Range

7-yr Warranty
Auto-Sensing
115/230 Volt
TIG Scratch

Arc Gouge

Arc Force
Hot Start
Compact
Polarity

Meters
(Amps)

Phase
Mode

Hertz
Stick

COMMERCIAL
Invertec® V155-S CC DC 5-155 DC 1 50/60 • • • •
AC 225 ™
CC AC 40-225 AC 1 50/60 •
30-125 DC
AC/DC 225/125™ CC AC/DC 40-225 AC 1 50/60 • •
INDUSTRIAL
40-250 DC
Idealarc® 250 CC AC/DC 35-300 AC 1 60 •
Invertec® V275-S CC DC 5-275 DC 1/3 50,60 • • •
Idealarc® R3R-400 CC DC 60-500 DC 3 60 • • • •
Idealarc R3R-500
®
CC DC 75-625 DC 3 60 • • • •
KEY: Excellent Good Optional
STICK WELDERS

Invertec® V155-S Processes

• Stick
High-Performance Stick Welder • DC TIG

In A Portable Package
Output
• Two stick welding modes provide optimal
welding performance for Soft (E7018)
and Crisp (E6011) electrode applications Input
• Auto-Adaptive Arc Force minimizes
spatter and electrode sticking in the
puddle without compromising arc
stability when stick welding
Literature
• Touch Start TIG® mode provides TIG E2.141
welding capabilities in a stick machine
• Automatically connects to either 120V
or 230V power

Product Product Input Power Rated Output Input Current @ HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Current/Voltage/Duty Cycle Rated Output(1) Output Range in (mm) lb (kg)
Invertec® V155-S K2605-1 120/1/50/60 75A/23.0V/100% Stick 24.0A 5-155 Amps DC 11.3 x 6.2 x 15.4 14.7
100A/24.0V/30% Stick 33.8A Max. OCV: 75V (288 x 158 x 392) (6.7)
105A/14.2V/100% TIG 21.5A
130A/15.2V/30% TIG 28.8A
230/1/50/60 100A/24.0V/100% Stick 21.0A
145A/25.8V/30% Stick 31.0A
100A/14.0V/100% TIG 14.1A
155A/16.2V/30% TIG 22.8A
(1)
Input amps on 60 Hz input.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

AC 225™ Processes
• Stick
Proven For Generations,
Built To Last A Lifetime Output

• 40-225 amps AC output control allows for

3/16 in. (4.8 mm) diameter mild steel stick
Input
electrodes and 5/32 in. (4.0 mm) diameter
of other electrode types.

Literature
E2.30

Product Product Input Power Rated Output Input Current @ HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Current/Voltage/Duty Cycle Rated Output Output Range in (mm) lb (kg)
AC 225™ K1170 230/1/60 225A/25V/20%(1) 50A 40-225 Amps 24 x 17.25 x 12 109
Max. OCV: 79V (610 x 438 x 305) (49.5)

Except 75 amp setting which can be used continuously for 1 hour.

(1)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

4 | www.lincolnelectric.com/stick-welders
STICK WELDERS

AC/DC 225/125™ Processes

• Stick
An Iconic AC/DC Stick Welder
That’s Built To Last
Output
• 225 amp AC output is enough for
3/16 in. (4.8 mm) diameter general
purpose mild steel electrodes Input
• 125 amp DC output is enough for most
1/8 in. (3.2 mm) electrodes

Literature
E2.60

Product Product Input Power Rated Output Input Current @ HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Current/Voltage/Duty Cycle Rated Output Output Range in (mm) lb (kg)
AC/DC 225/125™ K1297 230/1/60 AC: 225A/25V/20% AC: 50A 40-225 Amps AC 24 x 17.25 x 12 124
DC: 125A/25V/20% DC: 36A Max. OCV: 79V (610 x 438 x 305) (56.3)
30-125 Amps DC
Max. OCV: 73V

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Idealarc® 250 Processes

• Stick
Rugged. Reliable. Red. • Gouging

• Up to 300 amps welding output in AC and 250 Output

amps in DC polarity enables the operation of
some 1/4 in. (6.4 mm) electrodes
• Suitable for use with a variety of stick electrode Input
types, including low hydrogen, stainless steel,
hardfacing, and cast iron
• Full-range continuous control provides precise
command of heat input
Literature
• The K1053-9 Idealarc® 250 model E2.70
features Power Factor Capacitors (PFC)

Product Product Input Power Rated Output Input Current @ HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Current/Voltage/Duty Cycle Rated Output Output Range in (mm) lb (kg)
Idealarc® 250 K1053-9 208/230/460/1/60 AC: 250A/30V/30% 75/68/34A 35-300 Amps AC 27 x 19 x 21.5 350
w/PFC(1) DC: 250A/30V/30% Max. OCV: 72V (686 x 483 x 546) (159)
40-250 Amps DC
Base Model K1053-8 230/460/575/1/60 86/43/34A Max. OCV: 70V

PFC = Power Factor Capacitors

(1)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/stick-welders | 5
STICK WELDERS

Invertec® V275-S Processes

• Stick
Cover All Your Bases • DC TIG
• Gouging

• Outstanding stick performance, including E6010

and E7018 and everything in between, for both Output
whip and drag techniques
• Selectable Hot Start technology enables
enhanced arc starting on thick and Input
dirty material
• Full welding output regardless of input power

Literature
E2.161

Product Product Input Power Rated Output Input Current @ HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Current/Voltage/Duty Cycle Rated Output Output Range in (mm) lb (kg)
Invertec® V275-S 208/230/460/575/3/60 275A/31V/35% 38/37/19/16A 5-275A 13.6 x 9.0 x 20.25 54.5
Base Model K2269-1 250A/30V/60% 34/33/17/14A (345 x 229 x 514) (24.7)
200A/28V/100% 27/25/13/11A
or or
208/230/460/575/1/60 275A/29-31V/35% 68/67/38/31A
Base Model K2269-3 250A/30V/60% 63/62/33/27A
w/Tweco® Style 200A/28V/100% 49/48/26/21A
Receptacles(1) 220/380/400/ 250A/30V/35% 32/20/19/18/17A
415/440/3/50 200A/28V/100% 25/15/15/14/13A
220/380/400/ 63/42/40/38/36A
415/440/1/50 48/32/30/29/27A

With Tweco®-style output connectors. Tweco® is a registered trademark of Victor Technologies International, Inc.
(1)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Idealarc® R3R-400 Processes

• Stick
Heavy-Duty Stick Welding • DC TIG
• Gouging
For The Long Haul

• Polarity switch, voltmeter and ammeter (analog) Output

• Ideal for hardfacing applications
• Seven-year transformer warranty
Input
• Wide operating range of 60-500 amps and
exceptionally smooth arc with mild steel, low
hydrogen and stainless steel electrodes
• Arc gouge using up to 5/16 in. (7.9 mm) diameter
carbon electrode Literature
E2.100
• Stackable case design conserves floor space

Product Product Input Power Rated Output Input Current @ HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Current/Voltage/Duty Cycle Rated Output Output Range in (mm) lb (kg)
Idealarc® R3R-400 K1285-16 230/460/3/60 400A/36V/60% 74/37A 60-500A 27.5 x 22.3 x 32 402
Max. OCV: 67V (699 x 566 x 813) (183)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

6 | www.lincolnelectric.com/stick-welders
STICK WELDERS

Idealarc® R3R-500 Processes

• Stick
More Amps For Heavy-Duty • DC TIG
• Gouging
Stick Welding and Gouging

• Arc gouge with the R3R-500 using up to Output

3/8 in. (9.5 mm) diameter carbon electrode
• Polarity switch, voltmeter and ammeter (analog)
Input
• Substantial amperage range at 72-625 amps
for use on thicker materials
• Seven-year transformer warranty
• Stackable case design conserves floor space
Literature
E2.100

Product Product Input Power Rated Output Input Current @ HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Current/Voltage/Duty Cycle Rated Output Output Range in (mm) lb (kg)
Idealarc® R3R-500 K1286-16 230/460/3/60 500A/40V/60% 88/44A 72-625A 27.5 x 22.3 x 32 446
Max. OCV: 67V (699 x 566 x 813) (203)
K1286-25 230/460/575/3/60

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/stick-welders | 7
STICK WELDERS

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

Invertec® V155-S
Base Model (K2605-1)
• Stick electrode holder, cable
and Twist Mate™ plug
• Work cable and clamp with Twist Mate plug Shown:
Invertec® V155-S
• Fully adjustable shoulder strap
• 120/230V input cord, 6.6 ft. (2 m)
with a 120V 15 Amp plug
• ­­­­­E xtra 120V 20 Amp plug

AC 225™
Base Model (K1170)
• Insulated electrode holder and cable
• Heavy duty work clamp and cable
• Helpful Welder’s Guide Shown:
AC 225™
• Input Cable with integrated plug

AC/DC 225/125™
Base Model (K1297)
• Insulated electrode holder and cable
• Heavy duty work clamp and cable
• Helpful Welder’s Guide
• Input Cable with integrated plug

Shown:
AC/DC 225/125™

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

8 | www.lincolnelectric.com/stick-welders
STICK WELDERS

Accessories

Idealarc® R3R-400

Idealarc® R3R-500
Invertec® V275-S
Invertec® V155-S

Idealarc® 250
AC/DC 225™
AC 225™
Base Model

Base Model

Base Model
Base Model

Base Model

Base Model
Base Model

Base Model

K1286-16 Base Model

K1286-25 Base Model

w/Tweco®
w/PFC

K1285-16
K2605-1

K1053-9

K1053-8

K2269-3
K2269-1
K1297
K1170
Product Name Product No.
GENERAL
Wheel Kit K761 • •

Undercarriage K866 • •

Welding Cart with 80 cu. ft. (2.27 m ) bottle capacity

3
K2275-1 •

Twist Mate™ Cable Plug for 6-4 Cable K852-25 •

Twist Mate Cable Plug for 1/0-2/0, 50-70 mm Cable

™ 2
K852-70 • •

Twist Mate™ Cable Plug for 2/0-3/0, 70-95 mm2 Cable K852-95 • •

Twist Mate Receptacle for 1/0-2/0, 50-70 mm Cable

™ 2
K1759-70 • •

Twist Mate Receptacle for 2/0-3/0, 70-95 mm Cable

™ 2
K1759-95 • •

Tweco® Style Cam-Lock Adapter Plug K2946-1 • •

Arc Tracker ™
K3019-1 • • • • • • •

Undercarriage – Hand moving K841 • • •

Work Lead Package, 15 ft. (4.6 m) 4/0 Cable K2149-1 • • •

Weld Fume Control System See Fume Sec. • • • • • • • • • •

STICK
Accessory Kit, 150 Amp K875 • • • •

Accessory Kit, 400 Amp K704 • • • • • • •

Stick Electrode Holder, Work Clamp, Cable & Twist Mate Set ™
K2394-1 • •

Remote Output Control, 6-pin, 25 ft. (7.6 m) K857 • • • • •

Remote Output Control, 6-pin, 100 ft. (30 m) K857-1 • • • • •

TIG
Pro-Torch™ TIG Torches See Guns Sec. • • • • •

PTA-17V Flex Head Gas Vavle TIG Torch w/Ultra-Flex Cable, 12.5 ft. (3.8 m), 1 pc.
™
K1782-13 •

Small Twist Mate Torch Adapter (with separate gas)

™
K960-2 •

Parts Kit for PTA-17 Series Torches KP508 •

Deluxe Adjustable Gas Regulator & Hose Kit K586-1 • • • •

TIG-Mate™ 17V TIG Torch Starter Kit (air-cooled) K2265-1 • •

Twist Mate™ Torch Adapter (with separate gas) K960-1 • •

Foot Amptrol ™
K870 • • • • •

Hand Amptrol™ (Rotary Track Style) K963-3 • • • • •

TIG Module K930-2 • • •

Docking Kit K939-1 • • •

Contractor Kit K938-1 • • •

Control Cable, 9-pin to 6-pin and 115V plug K936-3 • • •

Control Cable Extension, 45 ft. (13.7 m) K937-45 • • •

2-YEAR EXTENDED WARRANTY AVAILABLE — • • • • • • • • • •

For more information on our Extended Warranty program, visit www.lincolnelectric.com/warranty • Optional

www.lincolnelectric.com/stick-welders | 9
 TIG WELDERS
MODEL OUTPUT PROCESS INPUT FEATURES
Touch Start TIG®
TIG High-Freq™

Micro-Start™ ll

Auto-Balance®
Range (Amps)

AC Frequency
Auto Sensing

Ready-Pak®
TIG Current

AC Balance
Adjustable

Adjustable
TIG Pulse
Polarity

Phase

Hertz
Mode

Start
Stick

CONVENTIONAL TECHNOLOGY
Precision TIG® 225 CC AC/DC 5-230 1 50/60 • • • • •
Precision TIG 275
®
CC AC/DC 2-340 1 50/60 • • • • (3)
•
Precision TIG® 375 CC AC/DC 2-420 1 50/60 • • • • •
INVERTER TECHNOLOGY
Invertec® V155-S CC DC 5-155 1 50/60 • •
Invertec® V160-T CC DC 5-160 1 50/60 • •
Square Wave TIG 200
®
CC AC/DC 10-200 (1)
1 50/60 • • • •
Aspect 375
®
CC AC/DC 2-375 (2)
1/3 50/60 • • • • • •
10 | www.lincolnelectric.com/tig-welders
KEY: Excellent Good Optional (1)
230 Volts (2)
Three-phase (3)
Pulse available with Advanced Pulse Control Panel
TIG WELDERS

Invertec® V155-S Processes

• Stick
Best-in-Class TIG and Stick Performance • DC TIG

• Touch Start TIG® mode provides TIG welding Output

capabilities in a stick machine
• Two stick welding modes provide optimal
welding performance for Soft (E7018) Input
and Crisp (E6011) electrode applications
• Auto-Adaptive Arc Force minimizes
spatter and electrode sticking in the
puddle without compromising arc
Literature
stability when stick welding
E2.141
• Automatically connects to 120V or
230V service

Product Product Input Power Rated Output: Current/ Input Current @ HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output(1) Output Range in (mm) lb (kg)
Invertec® V155-S K2606-1 120/1/50/60 Stick: 75A/23.0V/100% 24.0A 5-155 Amps DC 11.3 x 6.2 x 15.4 14.7
(Ready-Pak® Pkg.) Stick: 100A/24.0V/30% 33.8A Max. OCV: 75V (288 x 158 x 392) (6.7)
TIG: 105A/14.2V/100% 21.5A (machine only) (machine
TIG: 130A/15.2V/30% 28.8A only)
230/1/50/60 Stick: 100A/24.0V/100% 21.0A
Stick: 145A/25.8V/30% 31.0A
TIG: 100A/14.0V/100% 14.1A
TIG: 155A/16.2V/30% 22.8A

(1)
Input amps on 60 Hz input.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Invertec® V160-T Processes

• Stick
High Performance TIG Welding • DC TIG

In A Compact Design
Output
• High-frequency TIG starting makes it easy to
establish an arc under a variety of conditions
• Built in pulsing functions help minimize heat Input
input on thin materials, and provide for a faster
freezing weld puddle for uphill welding on
curved surfaces such as process piping
• Ideally suited for maintenance operations
Literature
and other external field operations E3.105
• Automatically connects to 120V or
230V service

Product Product Input Power Rated Output: Current/ Input Current @ HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Output Range in (mm) lb (kg)
Invertec® V160-T K1845-1 120/1/50/60 TIG: 90A/14.6V/100% 20A 5-160 Amps DC 13 x 8 x 17 24
20A Branch Circuit Stick: 60A/22.4V/100% Max. OCV: 48V (330 x 203 x 432) (10.8)
120/1/50/60 TIG: 110A/14.4V/100% 25A
30A Branch Circuit Stick: 80A/23.2V/100%
230/1/50/60 TIG: 130A/15.2V/100% 20A
30A Branch Circuit Stick: 130A/25.2V/100%

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/tig-welders | 11
TIG WELDERS

Square Wave® TIG 200 Processes

• DC Stick
200 Amp AC/DC TIG and Stick Welding • AC/DC Pulsed TIG
Power Source

• Simple user interface makes machine setup easy Output

• Available features like pulse mode help make you a

better TIG welder, faster
Input
• High frequency starting for aluminum welding
• Built-in settings for more cleaning action or wider
or tighter arc configurations for aluminum welding
• TIG welding for critical welds where precision
Literature
and bead appearance are important E3.38
• Bonus of stick welding capability for outdoor
work or thicker materials
• Plugs into a standard 120V or 230V circuit
• Portable and convenient to use – only 46 lb (21 kg)

Product Product Input Power Rated Output: Current/ Input Current @ HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Output Range in (mm) lb (kg)
Square Wave® TIG 200 K5126-1 120/1/50/60 TIG: 125A/25%(1) 22A TIG: 10-125A 14 x 10.75 x 19.25 46
TIG: 100A/40% 17A Stick: 10-90A (358 x 282 x 502) (21)
TIG: 85A/60% 14A
Stick: 75A/20% 19A
Stick: 65A/60% 16A
230/1/50/60 TIG: 200A/25% 22A TIG: 10-200A
TIG: 160A/40% 17A Stick: 10-170A
TIG: 130A/60% 13A
Stick: 170A/20% 25A
120V AC TIG 110A/25%
(1)
Stick: 100A/60% 13A

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

STACK DIMES AND SAVE DOLLARS.

The Square Wave® TIG 200 allows welding enthusiasts of all levels to explore their creativity. The user interface
makes machine setup easy and includes advanced features that will help you become a better TIG welder, faster.
Whether you’re TIG welding aluminum or stick welding, this feature-packed, 46-pound machine is ready to work
from either 120V or 230V circuit, so you can Take it Everywhere, Plug in Anywhere.™

For more information, visit www.lincolnelectric.com

#StackingDimes
AR15-43 ©2016 The Lincoln Electric Co. All Rights Reserved.
TIG WELDERS

Precision TIG® 225 Processes

• Stick
Versatile TIG and Stick Welder • TIG

• Easy-to-use operator interface – select mode,

polarity and weld Output

• AC Auto-Balance® automatically adjusts for

the optimal mix of cleaning and penetration
Input
when welding aluminum
• Take full control: Adjust cleaning action or
penetration on aluminum. Enable the TIG pulser
to minimize distortion from excessive heat input
• Offers outstanding stick welding capabilities Literature
E3.37
• Experience enhanced starting, optimal arc stability,
and precise crater fills with Micro-Start™ II technology

Product Product Input Power Rated Output: Current/ Input Current @ HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Output Range in (mm) lb (kg)
Precision TIG® 225 K2535-1 208/230/1/60 130A/40% 40% Duty Cycle: 61/55 5-230 Amps AC 20.7 x 14.5 x 25.6 212
Ready-Pak® Pkg. 110A/60% 60% Duty Cycle: 52/47 5-230 Amps DC (526 x 368 x 650) (96)
Max. OCV: 75V
Ready-Pak® K2535-2 31.2 x 19.8 x 38 258
w/Cart Pkg. (794 x 503 x 966) (117)
Base Model K2533-2 460/575/1/60 40% Duty Cycle: 28/22 20.7 x 14.5 x 25.6 192
60% Duty Cycle: 23/19 (526 x 368 x 650) (87)
K2534-1 380/400-415/1/50/60 40% Duty Cycle: 33/32
60% Duty Cycle: 28/27

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Precision TIG® 275 Processes

• Stick
A TIG Welding Workhorse • TIG

• AC Auto-Balance® automatically adjusts for the optimal Output

mix of cleaning and penetration when welding aluminum.
Or, take full control to adjust cleaning or penetration.
• Delivers the widest output range in its class from Input
2-340 amps
• Upgrade with the optional Advanced Pulse Control
panel to enable better control over heat input, resulting
in less distortion on thin metals
Literature
• Experience enhanced starting, optimal arc stability, E3.51
and precise crater fills with Micro-Start™ II technology

Product Product Input Power Rated Output: Current/ Input Current @ HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Output Range in (mm) lb (kg)
Precision TIG® 275 K2618-1 208/230/460/1/60 275A/40% 40% Duty Cycle: DC: 2-340A 49.7 x 28 x 41 641
Ready-Pak® 225A/60% 104/94/47A AC: 2-340A (1262 x 711 x 1041) (291)
w/Cart Pkg. 60% Duty Cycle: Max. OCV: 75V
86/78/39
Base Model K2619-1 31 x 22 x 26 397
(787 x 559 x 660) (180)
K2619-2 460/575/1/60 40% Duty Cycle: 47/38A
60% Duty Cycle: 39/31
K2620-1 220-230/380-400/ 40% Duty Cycle:
415/1/50/60 95/55/50A
60% Duty Cycle:
80/46/42

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/tig-welders | 13
TIG WELDERS

Precision TIG® 375 Processes

• DC Stick
Precision Welding, Maximum Range • AC/DC Pulsed TIG

TIG Welder
Output
• Tackle either end of the material thickness spectrum with
the widest operating range in its class from 2 to 420 amps
• AC Auto-Balance® automatically adjusts for the optimal mix Input
of cleaning and penetration when welding aluminum. Or,
take full control to adjust cleaning or penetration.
• Standard pulse functions enable better control over heat
input, resulting in less distortion on thin metals
Literature
• Experience enhanced starting, optimal arc stability, E3.51
and precise crater fills with Micro-Start™ II technology

Product Product Input Power Rated Output: Current/ Input Current @ HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Output Range in (mm) lb (kg)
Precision TIG® 375 K2624-1 208/230/460/1/60 375A/40% 40% Duty Cycle w/PFC: DC: 2-420A 49.7 x 28 x 41 751
Ready-Pak® 350A/60% 112/102/51A AC: 2-420A (1262 x 711 x 1041) (341)
w/Cart Pkg. 60% Duty Cycle: Max. OCV: 80V
102/92/46
Base Model K2622-1 31 x 22 x 26 507
(787 x 559 x 660) (230)
K2622-2 230/460/575/1/60 40% Duty Cycle w/PFC:
102/51/41A
60% Duty Cycle: 92/46/37
K2623-1 220-230/380-400/ 40% Duty Cycle w/PFC:
415/1/50/60 119/69/63A
60% Duty Cycle:
110/64/59

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Aspect® 375 Processes

• AC/DC TIG
Advanced TIG Technology Made Simple • Stick

• Effortless arc control for the smoothest welds Output

• AC Auto-Balance® makes it simple by automatically
providing the optimal mix of cleaning and penetration
on aluminum Input
• Activate Intellistart to provide for soft starts on thin
™

materials for minimal distortion and hotter starts on

thick materials
Literature
• Customize when you need it: Manage AC frequency, E3.117
balance and offset to modify arc profile, cleaning action
or penetration
Product Product Input Power Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range in (mm) lb (kg)
Aspect® 375 K3945-1 1-Phase: 3-Phase: 3-Phase: 3-Phase: 21 x 11.8 x 25.5 105
Base Model 200-600/50/60 GTAW: 350A/24/30% 30% DC GTAW 32/29/17/15/12 2-375A (533 x 300 x 648) (47.6)
GTAW: 250A/20/100% 100% DC GTAW 19/17/10/9/7
Ready-Pak® Pkg. K3946-2 3-Phase: SMAW: 350A/34/30% 30% DC SMAW 46/41/24/21/17 47 x 23 x 45 290
200-600/50/60 SMAW: 250A/30/100% 100% DC SMAW 29/26/15/13/10 1-Phase: (1194 x 584 x 1143) (132)
2-250A
1-Phase: 1-Phase:
GTAW: 240A/19.6/30% 30% DC GTAW 32/27/17/15/12
GTAW: 180A/17.2/100% 100% DC GTAW 21/19/11/9/7
SMAW: 240A/29.6/30% 30% DC SMAW 47/43/25/21/17
SMAW: 180A/27.2/100% 100% DC SMAW 33/30/17/15/12
WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov
14 | www.lincolnelectric.com/tig-welders
TIG WELDERS

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

Invertec® V155-S
TIG Ready-Pak® Welding Package (K2606-1) Precision TIG® 225
• Invertec® V155-S (K2605-1) Base Model (K2533-1)
• Stick electrode holder & cable, 10 ft. (3.0 m) • Torch Parts Storage Compartment
with Twist Mate™ plug • Torch Hanger
• Work clamp & cable, 10 ft. (3.0 m) with • 10 ft. (3.0 m) Work Cable & Clamp
Twist Mate™ plug
• Removable Lift Eye
• Fully adjustable shoulder strap Shown:
• 9 ft. (2.7 m) Input Power Cord with
• 120/230V input cord [6.6 ft. (2 m)] with NEMA 6-50P Plug Invertec® V155-S
a 120V 15 Amp plug Ready-Pak® Pkg.
• NEMA 6-50R Receptacle
• Extra 120V 20 Amp plug
• TIG Procedure Guide
• Gas Regulator & Hose (3000369)
• GTAW (TIG) Handbook
• PTA-17V TIG torch w/Ultra-Flex™ cable
and Twist Mate™ adapter
• PTA-17 TIG torch parts (KP508) Ready-Pak® Package (K2535-1)
• Easy-Store/Easy-Carry Suitcase • PTA-17 TIG Torch with Ultra-Flex™ Cable Assembly
• Twist Mate Adapter
• TIG Torch Parts
• Gas Regulator & Hose (3000369)
Invertec® V160-T
• Foot Amptrol™
Base Model (K1845-1) Shown:
• Work Clamp and Cable, 10 ft. (3.0 m)
• 115V Input cord (10 ft.) and plug (NEMA 5-15P) Precision TIG® 225
Ready-Pak® w/Cart Pkg.
• 20 Amp Plug (NEMA 5-20P)
Ready-Pak w/Cart Package (K2535-2)
• Twist Mate® Torch Adapter for PTA-9 or -17
one-piece torch • Everything Listed Above (K2535-1)
• Fully adjustable shoulder strap • Understorage Cart
• Work Clamp & Cable, 10 ft, (3.0 m)

Square Wave™ TIG 200

Base Model (K5126-1)
• PTA-17 Series 150A Air-Cooled TIG Torch with
Flexible Head and Ultra-Flex™ Cable Assembly
• Foot Amptrol™
• Regulator/Flowmeter with Gas Hose
• Stick Electrode Holder
• Ground Clamp
• 120/230V Input Cords
• TIG Torch Parts

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/tig-welders | 15
TIG WELDERS

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

Precision TIG® 275 Aspect® 375

Ready-Pak w/Cart Package (K2618-1)
®
Ready-Pak® Package (K3946-2)
• Precision TIG® 275 (K2619-1) • Aspect 375® (K3945-1)
• Under-Cooler Cart • Cool Arc® 47 Water Cooling System (K3950-1)
• Foot Amptrol™ • TIG Welding Cart (K3949-1)
• Harris® Gas Flowmeter Regulator & 10 ft. (3.0 m) • 20H-320-25R 320 Amp Water Cooled
Hose Kit (3100338) TIG Torch (K4168-2)
• PTW-20 Pro-Torch™ TIG Torch • Twist Mate® Torch Cable Adaptor (K1622-5)
• Zippered Torch Cover • TIG Torch Parts Kit (KP510)
• TIG Torch Parts Kit (KP510) • Foot Amptrol with 25 ft. (7.6m) Cable Shown:
• Water Hose (2 included) Assembly (K870) Precision TIG® 275
• 15 ft. (4.5 m) 2/0 Work Cable/Clamp • 15 ft. (4.5m) Work Lead Assembly (K1803-3) Ready-Pak® w/Cart Pkg.

• PTA-9 or -17 Torch Adapter • Gas Regulator With Hose (3100211)

• Low Conductivity Coolant (KP4159-1)

Precision TIG® 375

Ready-Pak® w/Cart Package (K2624-1)
• Precision TIG® 375 (K2622-1)
• Under-Cooler Cart
• Foot Amptrol™
• Harris® Gas Flowmeter Regulator & 10 ft. (3.0 m)
Hose Kit (3100338)
• PTW-20 Pro-Torch™ TIG Torch
• Zippered Torch Cover Shown:
Precision TIG® 375
• TIG Torch Parts Kit (KP510)
Ready-Pak® w/Cart Pkg.
• Water Hose (2 included)
• 15 ft. (4.5 m) 2/0 Work Cable/Clamp
• Adapter for optional PTA-9 or -17 Torch,
3/8 in. (9.5 mm)

Shown:
Aspect® 375
Ready-Pak® Package

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

16 | www.lincolnelectric.com/tig-welders
TIG WELDERS

Accessories

Square Wave® TIG 200

Precision TIG® 225

Precision TIG® 275

Precision TIG® 375

Invertec® V160-T
Invertec® V155-S

Aspect® 375
Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model
K2606-1

K2622-2
K2619-2

K3945-1
K2622-1
K2619-1
K1845-1

K5126-1

K2533-1
Product Name Product No.
GENERAL
Undercarriage K1869-1 • • • •

Understorage Cart K2348-1 •

Dual Cylinder Cart K2617-1 •

Inverter Cart K3949-1 •

Welding Cart (80 cu ft. bottle capacity) K2275-1 • •

Utility Cart (150 cu ft. bottle capacity) K520 • •

Small Canvas Cover K2377-1 • •

Medium Canvas Cover K2378-1 •

Advanced Control Panel K2621-1 • •

Work Clamp & Cable Assembly K2150-1 • • • •

Twist Mate Plug for 6-4 Cable

™
K852-25 •

Weld Fume Control System See Fume • • • • • • • • •

Sec.
STICK
Stick Electrode Holder & Cable K2374-1 •

Stick Electrode Holder, Work Clamp, Cable & Twist Mate Set K2394-1 • •

Stick Welding Accessory Kit, 150 Amp K875 • •

Stick Welding Accessory Kit, 400 Amp K704 • • • •

Remote Output Control, 25 ft (7.6 m) K857 • • • •

Remote Output Control, 100 ft (3.0 m) K857-1 • • • •

TIG
Wireless Foot Pedal & Receiver K4217-1 • • • • • •

Replacement Wireless Pedal Transmitter K4218-1 • • • • • •

Replacement Wireless Receiver K4219-1 • • • • • •

Hand Amptrol™ (Rotary Track Style) K963-3 • • • • • • • •

Foot Amptrol with 25 ft (7.6 m) cable assembly

™
K870 • • • • • • •

Arc Start Switch K814 • • • • • • • •

PTA-9, PTW-20, 20-250-25R and 20H-320-25R Gas Lens Parts Kit KP2414-1 • • • • • • • • •

PTA-9 -17 One Cable Torch Adapter K2166-3 • • • •

PTA-9, -17, -26 Two Cable Torch Adapter K2166-2 • • • •

PTA-26 One Cable Torch Adapter K2166-1 • • • •

PTA-9 Pro-Torch TIG Torch, 12.5 ft (3.8 m), 1 pc

™
K1781-1 • • • • • • • • •

PTA-9F Flex Head w/Ultra-Flex Cable TIG Torch Package, 12.5 ft (3.8 m), 1 pc K1781-9 • • • • • • • • •

• Optional

www.lincolnelectric.com/tig-welders | 17
TIG WELDERS

Accessories

Square Wave® TIG 200

Precision TIG® 225

Precision TIG® 275

Precision TIG® 375

Invertec® V160-T
Invertec® V155-S

Aspect® 375
Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model
K2606-1

K2622-2
K2619-2

K3945-1
K2622-1
K2619-1
K1845-1

K5126-1

K2533-1
Product Name Product No.
TIG, CON’T.
PTA-17 Pro-Torch™ TIG Torch, 12.5 ft (3.8 m), 1 pc K1782-1 • • • • • • • • •

PTA-17 Pro-Torch™ TIG Torch, 25 ft (7.6 m), 1 pc K1782-3 • • • • • • • • •

PTA-17 Pro-Torch TIG Torch, 25 ft (7.6 m), 2 pc

™
K1782-4 • • • •

PTA-17 Pro-Torch™ TIG Torch, 150 amp, 12.5 ft (3.8 m), 1 pc K1782-12 • • • • • • • • •

PTA-17FV Flex Head Gas Valve Pro-Torch TIG Torch w/Ultra-Flex Cable, 12.5 ft (3.8 m), 1 pc
™ ™
K1782-13 •

PTA-17F Ready-Pak , 150 amp air-cooled TIG Torch w/Flex Head & Ultra-Flex Cable,
® ™

12.5 ft (3.8 m), 1 pc, and Twist-Mate™ adapter. Includes #7 nozzle, 1/16 in. (1.6 mm) and K1782-14 • • • • • • • • •
3/32 (2.4 mm) collets & bodies, and E3® tungsten
PTA-17F Pro-Torch™ TIG Torch, 150 amp air-cooled w/Flex Head and Ultra-Flex™ Cable, K1782-15 • • • • • • • • •
12.5 ft (3.8 m), 1 pc
PTA-26 Pro-Torch™ TIG Torch, 12.5 ft (3.8 m), 1 pc K1783-1 • • • • • • •

PTA-26 200 Amp Air-Cooled TIG torch w/1 pc 25 ft (7.6 m) cable K1783-3 • • • • • • •

PTA-26 200 Amp Air-Cooled TIG torch w/2 pc 25 ft (7.6 m) cable K1783-4 • • • •

PTW-18 350 Amp Water-Cooled TIG torch with 12.5 ft (3.8 m) cable assembly K1784-1 • • • • • •

PTW-18 350 Amp Water-Cooled TIG torch w/3 pc. 25 ft (7.6 m) cable K1784-2 • • • • • •

PTW-20 Pro-Torch TIG Torch, 12.5 ft (3.8 m), 3 pc braided

™
K1784-3 • • • • • • • •

PTW-20 Pro-Torch™ TIG Torch, 25 ft (7.6 m), 3 pc braided K1784-4 • • • • • • • •

20H-320-25R 320 Amp Water Cooled TIG Torch, 3 pc. 25 ft. (7.6 m) covered cable K4168-2 • • • • • •

Parts Kit For PTA-9 Series Torches KP507 • • • • • • • • •

Parts Kit For PTA-17 Series Torches KP508 • • • • • • • • •

Parts Kit For PTW-18 and PTA-26 Series Torches KP509 • • • • • • • •

Parts Kit for 20-250-25R, 20H-320-25R, and PTW-20 TIG Torches KP510 • • • • • • • •

TIG-Mate 17 TIG Torch Starter Kit (air-cooled)

™
K2266-1 • • •

TIG-Mate 20 TIG Torch Starter Kit (water-cooled)

™
K2267-1 • • •

Harris® Ar/CO2 Flowmeter/Regulator with 10 ft (3.0 m) Gas Hose Kit 3100211 • • • • • • • •

Zippered Torch Cable Cover, 10 ft (3.0 m) K918-1 • • • • • • • • •

Zippered Torch Cable Cover, 22 ft (6.7 m) K918-2 • • • • • • • • •

Zippered Torch Cable Cover, Heavy Duty, 22 ft (6.7 m) K918-4 • • • • • • • • •

Small Twist Mate TIG Torch Adapter (w/separate gas)

™
K960-2 •

Twist Mate™ Torch Adapter, PTA-9 and -17 K1622-1 • • • •

Twist Mate Torch Adapter, PTA-26

™
K1622-3 • • • •

Twist Mate™ Torch Adapter, Water-Cooled (for use with Cool Arc® 40) K1622-4 • • •

Twist Mate™ Torch Adapter, Water-Cooled (for use with Cool Arc 47) ®
K1622-5 •

• Optional

18 | www.lincolnelectric.com/tig-welders
TIG WELDERS

Accessories

Square Wave® TIG

Precision TIG® 225

Precision TIG® 275

Precision TIG® 375

Invertec® V160-T
Invertec® V155-S

Aspect® 375
200
Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model
K2606-1

K2622-2
K2619-2

K3945-1
K2622-1
K2619-1
K1845-1

K5126-1

K2533-1
Product Name Product No.
TIG, CON’T.
Cool Arc® 40 Water Cooler 115/1/50/60 K1813-1 • • •

Cool Arc 40 Water Cooler for 230V

®
K2187-1 • • •

Cool Arc 47 Water Cooling System

®
K3950-1 •

Under-Cooler Cart Water Cooler K1828-1 • • • •

Water Hose Kit, 25 ft (7.6 m) (5/8 LH CGA to 5/8 LH CGA) K1859-2 • • • • • • • •

Magnum® Pro-Torch™ TIG Torches See 12.150 •

Cut Length Consumables See C1.10 • • • • • • • • •

2-YEAR EXTENDED WARRANTY AVAILABLE — • • • • • • • • •

For more information on our Extended Warranty program, visit www.lincolnelectric.com/warranty • Optional

www.lincolnelectric.com/tig-welders | 19
 MIG: WIRE FEEDER/WELDERS
MODEL OUTPUT PROCESS INPUT FEATURES
Synergic Control
Touch Start TIG®

Push-Pull Model
Digital Display
Current Range

Diamond Core
Speed Range

Technology ®

Technology ®
Consumable
ipm (m/mm)

MIG Pulsed

Flux-Cored
Cored Wire
Size Range

Size Range

Spool Gun
Solid Wire
Wire Feed

Portable

Chopper
Storage

Capable
Meters/
in (mm)

in (mm)
(Amps)

Phase

Hertz
Stick
MIG

120 VOLT INPUT

POWER MIG® 30-140 50-500 0.023-0.035 0.030-0.035 1 60 • • •
140C (1.3-12.7) (0.6-0.9) (0.8-0.9)
120/230 VOLT INPUT
POWER MIG® 120V: 30-140 50-500 0.023-0.035 0.030-0.045 • • •
1 60
180 Dual 230V: 30-180 (1.3-12.7) (0.6-0.9) (0.8-1.1)
POWER MIG® 120V: 20-140 50-500 0.023-0.035 0.030-0.045 • • • •
1 60
210 MP® 230V: 20-220 (1.3-12.7) (0.6-0.9) (0.8-1.1)
208-230 VOLT INPUT
POWER MIG® 50-500 0.025-0.035 0.030-0.045
180C 30-180 (1.3-12.7) (0.6-0.9) (0.8-1.1) 1 60 • • •
POWER MIG® 50-700 0.023-0.045 0.030-0.045
256 30-300 (1.3-17.7) (0.6-1.1) (0.8-1.1) 1 60 • • • •
POWER MIG® 50-700 0.025- 0.045 0.035-0.045
260 30-300 (1.3-17.7) (0.6-1.1) (0.9-1.1) 1 60 • • • • • •
POWER MIG ®
50-700 0.023-0.045 0.030-0.045 50/ • • • • • •
5-350 1
350 MP® (1.3-17.7) (0.6-1.1) (0.8-1.1) 60

KEY: Excellent Good Optional

MIG: WIRE FEEDER/WELDERS

POWER MIG® 140C Processes

• MIG
MIG Welding Made Simple • Flux-Cored

• 120-volt input enables you to plug in at home Output

for repair projects or auto body work
• Consistent wire feeding through MAXTRAC®
dual gear-driven drive roll system Input
• PC boards are fully encapsulated and
additionally protected by a framed tray
for maximum circuit protection
• Reliable wire delivery and extended tip life Literature
with Magnum® PRO gun and Copper Plus™ E7.23
contact tips

Product Input Power Rated Output: Current/ Input Current @ Wire Feed Speed HxWxD Net Wt.
Product Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Output Range ipm (m/min) in (mm) lb (kg)
POWER MIG® K2471-2 120/1/60 90A/19.5V/20% 20A 30-140A 50-500 14 x 10.15 x 18.6 58
140C (1.3-12.7) (357 x 258 x 472) (26.3)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

POWER MIG® 180C Processes

• MIG
The Professional’s Choice.SM • Flux-Cored

• 230-volt input power to tackle jobs Output

big and small
• Consistent wire feeding through dual
gear-driven drive rolls Input
• Encapsulated PC boards for optimal
circuit protection

Literature
E7.24

Product Input Power Rated Output: Current/ Input Current @ Wire Feed Speed HxWxD Net Wt.
Product Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Output Range ipm (m/min) in (mm) lb (kg)
POWER MIG® K2473-2 208/230/1/60 130A/17V/30% 20A 30-180A 50-500 14 x 10.15 x 18.6 66
180C 130A/20V/30% (1.3-12.7) (357 x 258 x 472) (30)
Max. OCV: 34

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/mig-welders | 21
MIG: WIRE FEEDER/WELDERS

POWER MIG® 180 Dual Processes

• MIG
The Best of Both Worlds • Flux-Cored

• Choose 120-volt or 230-volt input power Output

for light materials or thicker metals
• Consistent wire feeding through dual
gear-driven drive rolls Input
• Encapsulated PC boards for optimal
circuit protection
• Spool gun ready
Literature
E7.28

Product Input Power Rated Output: Current/ Input Current @ Wire Feed Speed HxWxD Net Wt.
Product Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Output Range ipm (m/min) in (mm) lb (kg)
POWER MIG® K3018-2 120/1/60 120V: 90A/19.5V/20% 20A 30-140A 50-500 14 x 10.15 x 18.6 68
180 Dual (1.3-12.7) (357 x 258 x 472) (31)
208/230/1/60 208V: 130A/17.6V/30% 30-180A
230V: 130A/20V/30%

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

POWER MIG® 210 MP® Processes

• MIG
Versatile, Rugged & Simple To Use • Flux-Cored
• DC Stick
• DC TIG
• Lightweight and portable –
just 40 lbs. (18 kg)
Output
• Ready. Set. Weld® – intuitive
push-and-turn digital controls
make setup a breeze
Input
• 210 Amps – the power to
tackle any job

Literature
E7.50

Product Input Power Rated Output: Current/ Input Current @ Wire Feed Speed HxWxD Net Wt.
Product Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Output Range ipm (m/min) in (mm) lb (kg)
POWER MIG® K3963-1 120/1/60 120V: 100A/19.0V/40% 120V: 15A 120V: 50-500 14 x 10.75 x 19 40
210 MP® 230/1/60 230V: 200A/24V/25% 230V: 14.7A 20-140A DC (1.3-12.7) (356 x 273 x 483) (18)
Max. OCV: 56V
Aluminum K4195-1 — —
One-Pak® 230V:
20-220A DC
TIG One-Pak® K4195-2 Max. OCV: 56V

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

22 | www.lincolnelectric.com/mig-welders
 MIG: WIRE FEEDER/WELDERS

POWER MIG® 256 Processes

• MIG
• Flux-Cored
POWER MIG® with Precision Control

• Ideal for light industrial and Output

maintenance work
• Weld up to 3/4 in. (19.1 mm) mild steel
with self-shield flux-cored wire Input

• Digital meters help dial in exact settings

and timer functions deliver additional
weld control
• Spool gun ready for our premium
Literature
Magnum® PRO 250LX E7.55

Product Input Power Rated Output: Current/ Input Current @ Wire Feed Speed HxWxD Net Wt.
Product Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Output Range ipm (m/min) in (mm) lb (kg)
POWER MIG® K3068-1 208/230/1/60 250A/26V/40% 56/52A(1) 30-300A 50-700 31.8 x 18.9 x 38.8 220
256 (1.3-17.7) (808 x 480 x 985) (100)
K3068-2(2) 230/460/575/1/60 50/24/19A
One-Pak ®
K3069-1 208/230/1/60 56/52A(1) — —
w/Spool Gun

(1)
Input current is at the rated output with the 115V auxiliary receptacle also drawing 15 amps. (2)Does not include input cable.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

POWER MIG® 260 Processes

• MIG
• Flux-Cored
Fabrication Simplified

• Ready. Set. Weld® Quick Set Up Output

• ArcFX Technology
™

• Universal Input Voltage Input

• Memory Capability
• Auto Calibration for Push-Pull
Aluminum Performance
Literature
E7.56

Product Input Power Rated Output: Current/ Input Current @ Wire Feed Speed HxWxD Net Wt.
Product Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Output Range ipm (m/min) in (mm) lb (kg)
POWER MIG® 260 K3520-1 208/230/460/575/1/60 250A/26.5V/40% 59/55/27/21 30-300A 50-700 37.3 x 18 x 40.4 247
(1.3-17.7) (947 x 457 x 1026) (112)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/mig-welders | 23
MIG: WIRE FEEDER/WELDERS

POWER MIG® 350 MP® Processes

• Stick
• TIG
The Professional’s Choice!™ – • MIG
Multi-Process Welder • Pulsed
• Flux-Cored
• Weld stick, TIG and MIG with one
multi-process machine Output
• Up to three ways to feed aluminum, including
push gun, spool gun or push-pull gun, depending
on frequency of use and budget Input

• Capable of advanced pulse processes to control

heat input and penetration in the weld
• Consistent wire feeding through the all-metal
MAXTRAC® dual gear-driven drive roll system Literature
E7.57

Product Input Power Rated Output: Current/ Input Current @ Wire Feed Speed HxWxD Net Wt.
Product Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Output Range ipm (m/min) in (mm) lb (kg)
POWER MIG® K2403-2 208/230/460/575/ 300A/32V/60%(1) 72/62/31/25A 5-350A DC 50-700 31.8 x 18.9 x 38.8 255
350 MP® 1/50/60 Max OCV: 67V (1.3-17.7) (808 x 480 x 985) (116)
Aluminum One-Pak® K4023-1
Pkg. for Trailer Mfg./
General Fab.
Aluminum One-Pak® K4023-2
Pkg. for Auto Body
Repair

(1)
40% on 208V input. Ratings based on 60 Hz operation.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

24 | www.lincolnelectric.com/mig-welders
WE UNDERSTAND
CONSISTENCY &
EFFICIENCY

With an easy-to-use interface that provides visual feedback on your weld settings, and an ergonomic design
to reduce repetitive movements, the NEW POWER MIG® 260 is purpose-built for the production fabricator.

Learn more at www.lincolnelectric.com/power-mig-260

AR18-45 | ©2018 Lincoln Global, Inc. All Rights Reserved. UNDERSTANDING DRIVES SOLUTIONS
MIG: WIRE FEEDER/WELDERS

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

POWER MIG® 140C POWER MIG® 180 Dual

Base Model (K2471-2) Base Model (K3018-2)
• Magnum® PRO 100L Gun, 10 ft. (3.0m) • Magnum® PRO 100L Gun, 10 ft. (3.0m)
• Gun Cable Liner (pre-installed in gun) • Gun Cable Liner (pre-installed in gun)
• Gas and Gasless Nozzles • Gas and Gasless Nozzles
• 0.025 in. (0.6mm) Contact Tips (Qty. 3) • 0.025 in. (0.6mm) Contact Tips (Qty. 3)
• 0.035 in. (0.9mm) Contact Tips (Qty. 3) • 0.035 in. (0.9mm) Contact Tips (Qty. 3)
• 0.025-0.030 in. (0.6-0.8 mm) MIG Drive roll • 0.025-0.030 in. (0.6-0.8 mm) MIG Drive roll
• 0.035 in. (0.9mm) MIG Drive Roll • 0.035 in. (0.9mm) MIG Drive Roll
• 0.030-0.045 in. (0.8-1.2mm) Knurled Drive Roll • 0.030-0.045 in. (0.8-1.2mm) Knurled Drive Roll
• 0.025-0.035 in. (0.6-0.9 mm) Wire Guide • 0.025-0.035 in. (0.6-0.9 mm) Wire Guide
• 0.045 in. (1.2 mm) Wire Guide • 0.045 in. (1.2 mm) Wire Guide
• Work Clamp and Cable, 10 ft. (3.0 m) • 120V and 230V Input Cables
• Deluxe Adjustable Gas Regulator and Hose Kit • Work Clamp and Cable, 10 ft. (3.0 m)
• Spindle Adapter, 8 in. (203 mm) Dia. Spools • Deluxe Adjustable Gas Regulator and Hose Kit
• 2 lb. (0.90 kg) Spool of SuperArc® L-56® • Spindle Adapter, 8 in. (203 mm) Dia. Spools
Mild Steel MIG Wire • 2 lb. (0.90 kg) Spool of SuperArc® L-56®
• 1 lb. (0.45 kg) Spool of Innershield® NR®-211-MP Mild Steel MIG Wire
• Learn-To-Use DVD • 1 lb. (0.45 kg) Spool of Innershield® NR®-211-MP
• Learn-To-Use DVD

POWER MIG® 180C

Base Model (K2473-2)
• Magnum® PRO 100L Gun, 10 ft. (3.0m)
• Gun Cable Liner (pre-installed in gun)
• Gas and Gasless Nozzles
• 0.025 in. (0.6mm) Contact Tips (Qty. 3)
• 0.035 in. (0.9mm) Contact Tips (Qty. 3)
• 0.025-0.030 in. (0.6-0.8 mm) MIG Drive roll
• 0.035 in. (0.9mm) MIG Drive Roll
• 0.030-0.045 in. (0.8-1.2mm) Knurled Drive Roll
• 0.025-0.035 in. (0.6-0.9 mm) Wire Guide
• 0.045 in. (1.2 mm) Wire Guide
• Work Clamp and Cable, 10 ft. (3.0 m)
• Deluxe Adjustable Gas Regulator and Hose Kit
• Spindle Adapter, 8 in. (203 mm) Dia. Spools
• 2 lb. (0.90 kg) Spool of SuperArc® L-56®
Mild Steel MIG Wire
• 1 lb. (0.45 kg) Spool of Innershield® NR®-211-MP
• Learn-To-Use DVD

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

26 | www.lincolnelectric.com/mig-welders
MIG: WIRE FEEDER/WELDERS

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

POWER MIG® 210 MP® POWER MIG® 256, con’t.

Base Model (K3963-1) Base Model (K3068-1)
• Magnum® PRO 175L Gun, 10 ft. (3.0m) • Everything listed with base model K3068-2
• Gun Cable Liner (pre-installed in gun) • 230V Input Power Cable
• Gas and Gasless Nozzles
• 0.025 in. (0.6mm) Contact Tips (Qty. 3) One-Pak® Package (K3069-1)
Shown:
• 0.035 in. (0.9mm) Contact Tips (Qty. 3) • Everything listed with base model K3068-1 POWER MIG® 210 MP®
Base Model with
• 0.025-0.030 in. (0.6-0.8 mm) MIG Drive roll • Magnum® PRO 250LX Spool Gun Standard Accessories
• 0.035 in. (0.9mm) MIG Drive Roll • Dual Cylinder Mounting Kit
• 0.030-0.045 in. (0.8-1.2mm) Knurled Drive Roll • Extra Gas Regulator
• 0.025-0.035 in. (0.6-0.9 mm) Wire Guide
• 0.045 in. (1.2 mm) Wire Guide
• 120V and 230V Input Cables POWER MIG® 260
• Work Clamp and Cable, 10 ft. (3.0 m) Base Model (K3520-1)
• Electrode Holder and Lead Assembly • Magnum® PRO 250L Gun, 15 ft. (4.5 m)
• Deluxe Adjustable Gas Regulator and Hose Kit • Deluxe Adjustable Gas Regulator and Hose Kit
• Spindle Adapter, 8 in. (203 mm) Dia. Spools • Drive Roll Kit Combination 0.035 in./0.045 in.
• 0.5 lb. (0.23 kg) Spool of SuperArc® L-56® (0.9 mm/1.1 mm) Sold Wire Shown:
POWER MIG® 256
Mild Steel MIG Wire • Work Clamp and Cable, 10ft. (3.0m) One-Pak® Package
• 0.5 lb. (0.23 kg) Spool of Innershield® NR®-211-MP • 230V Input Power Cable
Flux-Cored Wire

Aluminum One-Pak® Package (K4195-1)

POWER MIG® 350 MP®
• Everything listed above for Base Model
Base Model (K2403-2)
• Replacement Screen Shield
• Magnum® PRO Curve 300, 15 ft. (4.5 m)
• Magnum® PRO 100SG Spool Gun
• Gun Cable Liner (pre-installed in gun)
• Drive Rolls and Guide for Steel
TIG One-Pak® Package (K4195-2)
• 230V Input Power Cable
• Everything listed above for Base Model
• Work Clamp and Cable, 10 ft. (3.0 m)
• Replacement Screen Shield
• Deluxe Adjustable Gas Regulator and Hose Kit Shown:
• PTA-17V Ultra-Flex™ TIG Torch, 12 ft. (3.8 m) POWER MIG® 260
Base Model with
• Twist-Mate™ TIG Torch Adapter
Aluminum One-Pak® Package for Standard Accessories
• Foot Amptrol™ Trailer Manufacturing/General Fab (K4023-1)
• Foot Amptrol™ Adapter • Everything listed with base model
• Magnum® PRO AL gun G225A, 7-pin, 25 ft. (7.6 m)
• Aluminum Drive Roll Kit, 3/64 in. (1.2 mm)
POWER MIG® 256 • SuperGlaze® 5356 TM™ 3/64 in. (1.2 mm),
Base Model (K3068-2) 16 lb. (7.3 kg.) Spool
• Magnum® PRO 250L Gun, 15 ft. (4.5 m)
• Gun Cable Liner (pre-installed in gun) Aluminum One-Pak® Package for
Auto Body Repair (K4023-2)
• Drive Rolls and Guide for Steel
• Everything listed with base model
• Work Clamp and Cable, 10 ft. (3.0 m)
• Magnum® PRO AL gun G225A, 7-pin, 25 ft. (7.6 m) Shown:
• Deluxe Adjustable Gas Regulator and Hose Kit
• Aluminum Drive Roll Kit, 3/64 in. (1.2 mm) POWER MIG® 350 MP®
One-Pak® Package
• SuperGlaze® 5554 3/64 in. (1.2 mm),
16 lb. (7.3 kg.) Spool

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/mig-welders | 27
MIG: WIRE FEEDER/WELDERS

Accessories

POWER MIG® 180 Dual

POWER MIG® 350 MP®

POWER MIG® 210 MP®
POWER MIG® 180C
POWER MIG® 140C

POWER MIG® 260

POWER MIG® 256
Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model
K3520-1
K3068-2
K3068-1

K2403-2
K3018-2

K3963-1
K2473-2
K2471-2
Product Name Product No.
GENERAL
Welding Cart (80 cu. ft. bottle capacity) K2275-1 • • • •

Utility Cart (150 cu. ft. bottle capacity) K520 • • • •

Canvas Cover K2377-1 • • • •

Canvas Cover K2378-1 • • •

Spot Timer Kit K2525-1 • • •

Accessory Bag K3071-1 • • • •

Connector Kit – POWER MIG® K466-6 • •

8 in. (203.2 mm) O.D. Spool Adapter K468 • •

Dual Cylinder Mounting Kit K1702-1 • • •

Drive Roll, 0.025-0.030 in. (0.6-0.8 mm) Smooth KP2529-1 • • • •

Drive Roll, 0.035 in. (0.9 mm) Smooth KP2529-2 • • • •

Drive Roll, 0.030-0.045 in. (0.8-1.1 mm) Knurled KP2529-3 • • • •

Inner Wire Guide, 0.025-0.035 in. (0.6-0.9 mm) Steel KP2531-1 • • • •

Inner Wire Guide, 0.045 in. (1.1 mm) Steel KP2531-2 • • • •

Drive Roll Kit, 0.023-0.030 in. (0.6-0.8 mm) Solid Wire KP1696-030S • • •

Drive Roll Kit, 0.035 in. (0.9 mm) Solid Wire KP1696-035S • • •

Drive Roll Kit, 0.035 and 0.045 in. (0.9 and 1.1 mm) Solid Wire KP1696-1 • • •

Drive Roll Kit, 0.040 in. (1.0 mm) Solid Wire KP1696-2 • • •

Drive Roll Kit, 0.045 in. (1.1 mm) Solid Wire KP1696-045S • • •

Drive Roll Kit, 0.030-.035 in. (0.8-0.9 mm) Cored Wire KP1697-035C • • • •

Drive Roll Kit, 0.040-0.045 in. (1.0-1.1 mm) Cored Wire KP1697-045C • • • •

Drive Roll Kit, 0.035 in. (0.9 mm) Aluminum Wire KP1695-035A • •

Drive Roll Kit, 3/64 in. (1.2 mm) Aluminum Wire KP1695-3/64A • • • •

Weld Fume Control System — • • • • • • • •

STICK
Accessory Kit, 150 Amp K875 •

TIG
Pro-Torch™ TIG Torches See Gun Sec. • •

Parts Kit For PTA-17 Series Torches KP508 • •

Parts Kit For PTW-18 and -26 Series Torches KP509 •

Foot Amptrol ™
K870 • •

Hand Amptrol™ (Rotary Track Style) K963-3 • •

POWER MIG 210 MP TIG Amptrol Adaptor Kit

® ® ®
K4104-1 •

Arc Start Switch K814 •

Cut Length Consumables See C1.10 • •

• Optional

28 | www.lincolnelectric.com/mig-welders
MIG: WIRE FEEDER/WELDERS

Accessories

POWER MIG® 180 Dual

POWER MIG® 350 MP®

POWER MIG® 210 MP®
POWER MIG® 180C
POWER MIG® 140C

POWER MIG® 260

POWER MIG® 256
Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model
K3520-1
K3068-2
K3068-1

K2403-2
K3018-2

K3963-1
K2473-2
K2471-2
Product Name Product No.
WIRE FEEDER / PUSH-PULL GUNS
Magnum® PRO AL G225A Air-Cooled Push-Pull Guns
Front Trigger, 7-pin, 15 ft. (4.5 m) K3421-1 •

Front Trigger, 7-pin, 25 ft. (7.6 m) K3421-2 •

Front Trigger, 7-pin, 35 ft. (10.6 m) K3421-3 •

Front Trigger, 7-pin, 50 ft. (15.2 m) K3421-4 •

Rear Trigger, 7-pin, 15 ft. (4.5 m) K3356-1 •

Rear Trigger, 7-pin, 25 ft. (7.6 m) K3356-2 •

Rear Trigger, 7-pin, 35 ft. (10.6 m) K3356-3 •

Rear Trigger, 7-pin, 50 ft. (15.2 m) K3356-4 •

Magnum PRO AL G450W Water-Cooled Push-Pull Guns

®

Rear Trigger, 7-pin, 15 ft. (4.5 m) K3358-1 •

Rear Trigger, 7-pin, 25 ft. (7.6 m) K3358-2 •

Rear Trigger, 7-pin, 35 ft. (10.6 m) K3358-3 •

Rear Trigger, 7-pin, 50 ft. (15.2 m) K3358-4 •

Magnum PRO Curve 300 Series

® ™

10 ft. (3.0 m) K2951-1 •

15 ft. (4.5 m) K2951-2 •

20 ft. (6.1 m) K2951-3 •

25 ft. (7.6 m) K2951-4 •

Magnum PRO AL Pistol Grip Push-Pull Guns, Air Model

®

15 (4.6) K3478-1 •

25 (7.6) K3478-2 •

35 (10.7) K3478-3 •

Cougar Air-Cooled Push-Pull Gun, 7-pin, 25 ft. (7.6 m)

™
K2704-2 • •

Cougar Air-Cooled Push-Pull Gun, 7-pin, 50 ft. (15.2 m)

™
K2704-3 • •

SPOOL GUN
Magnum® PRO 100SG Spool Gun K3269-1 • • • • •

Magnum® SG Spool Gun, Air-Cooled, w/Remote, 25 ft. (7.6 m) K487-25 • • •

Magnum SG Spool Gun Control Cable Adapter

®
K2445-1 • •

Magnum PRO 250LX Spool Gun

®
K3570-2 • • •

Adapter Kit for Magnum SG ®

K3570-2
Control Cable Extension, 25 ft. (7.6 m) K2519-1 • • •

Spool Gun Holder K1738-1 • •

2-YEAR EXTENDED WARRANTY AVAILABLE — • • • • • • • •

For more information on our Extended Warranty program, visit www.lincolnelectric.com/warranty • Optional

www.lincolnelectric.com/mig-welders | 29
 MIG & FCAW: INDUSTRIAL WELDERS
MODEL OUTPUT PROCESS INPUT FEATURES
(on Power Rectifier)
Submerged Arc

7-yr. Warranty
Digital Display
Current Range

Arc Gouging
Flux-Cored

Stackable
Polarity

(Amps)

Phase

Hertz
Mode

MIG

300 AMPS
Idealarc® CV305 CV DC 50-400 3 60 • • •
400 AMPS
Idealarc CV400 CV DC 60-500 3 60 • •
30 | www.lincolnelectric.com/tig-welders
KEY: Excellent Good Optional
MIG & FCAW: INDUSTRIAL WELDERS

Idealarc® CV305 Processes

• MIG
Dependable High Output Wire Welding • Flux-Cored

• Digital Ammeter/Voltmeter – view voltage Output

presets and current during welding
• Easy access Twist Mate™ connections
on the front of the machine Input
• Two output connectors allow you to
connect to high or low inductance for
optimal arc control
Literature
E4.22

Product Product Input Power Rated Output Input Current @ HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Current/Voltage/Duty Cycle Rated Output Output Range in (mm) lb (kg)
Idealarc® CV305 K2400-1 208/230/460/3/60 315A/32.6V/100% 52/48/24A 50-400A 24.6 x 19.5 x 27.0 300
Base Models 7-34V (625 x 495 x 686) (136)
K2400-2 230/460/575/3/60 48/24/19A
Ready-Pak® Pkg K2395-2 208/230/460/3/60 52/48/24A 47.7 x 25.5 x 33.0 423
w/LF-72 Wire (1212 x 648 x 838) (192)
Feeder

50 Hertz models available.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Idealarc® CV400 Processes

• MIG
Dependable High Output Wire Welding • Flux-Cored

• Connect wire feeders via either 14-pin Output

MS-type or terminal strip
• 115V and 42V wire feeder auxiliary power
with circuit breaker protection Input

Literature
E4.30

Product Product Input Power Rated Output Input Current @ HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Current/Voltage/Duty Cycle Rated Output Output Range in (mm) lb (kg)
Idealarc® CV400 K1346-22(1) 230/460/575/3/60 400A/36V/100% 77/39/31A 60-500A 27.5 x 22.2 x 32 383
Base Models 450A/38V/60% 80/40/32A 12-42V (699 x 564 x 813) (174)
K1346-13 230/460/3/60 77/39A
80/40A
Ready-Pak® Pkg K2439-2 42.8 x 22.2 x 32 475
w/LF-72 Wire (1087 x 564 x 813) (215)
Feeder
Ready-Pak® Pkg K2496-2
w/LF-74 Wire
Feeder

(1)
Made to order. 50 Hertz models available.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/mig-welders | 31
MIG & FCAW: INDUSTRIAL WELDERS

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

Idealarc® CV305 Idealarc® CV400

Ready-Pak Package (K2395-2)
®
CV400/LF-72 Ready-Pak® Package (K2439-2)
• CV305 Power Source (K2400-1) • CV400 Power Source (K1346-13)
• LF-72 Bench Model, Standard Duty Wire Feeder • LF-72 Bench Model, Heavy Duty Wire Feeder
• Standard Wire Reel Stand • Heavy Duty Wire Reel Stand
• Work & Wire Feeder Weld Cable Package, • Weld Power Cable, 10 ft. (3.0 m), Qty. 2
includes 15 ft (4.5 m) Work Cable, 10 ft (3.0 m) • Work Clamp
Electrode Cable and Work Clamp
• Harris® Gas Regulator/Flowmeter & 10 ft. (3.0 m)
• Harris® Gas Regulator/Flowmeter & 10 ft. (3.0 m) Hose Kit (3100211)
Hose Kit (3100211)
• Magnum® PRO 350 Gun & Cable Assembly,
• Magnum® PRO 350 Gun & Cable Assembly, 15 ft. (4.5 m) with 0.035-0.045 in. (0.9-1.1 mm) liner
15 ft. (4.5 m) with 0.035-0.045 in. (0.9-1.1 mm) liner Shown:
• Control Cable, 10 ft. (3.0 m) Idealarc® CV400/LF72
• Control Cable, 10 ft. (3.0 m) Ready-Pak®
• 0.035-0.045 in. (0.9-1.1 mm) Drive Roll and
• 0.035-0.045 in. (0.9-1.1 mm) Drive Roll and Guide Tube Kit for Solid Wire
Guide Tube Kit for Solid Wire

CV400/LF-74 Ready-Pak® Package (K2496-2)

• CV400 Power Source (K1346-13)
• LF-74 Bench Model, Heavy Duty Wire Feeder
• Heavy Duty Wire Reel Stand
• Weld Power Cable, 10 ft. (3.0 m), Qty. 2
• Work Clamp
• Harris® Gas Regulator/Flowmeter & 10 ft. (3.0 m)
Hose Kit (3100211)
• Magnum® PRO 350 Gun & Cable Assembly,
15 ft. (4.5 m) with 0.035-0.045 in. (0.9-1.1 mm) liner
• Control Cable, 10 ft. (3.0 m)
• 0.035-0.045 in. (0.9-1.1 mm) Drive Roll and
Guide Tube Kit for Solid Wire

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

32 | www.lincolnelectric.com/mig-welders
MIG & FCAW: INDUSTRIAL WELDERS

Accessories

Idealarc® CV400
Idealarc® CV305
Base Model

Base Model

Base Model

Base Model
K1346-22

K1346-13
K2400-2
K2400-1
Product Name Product No.
GENERAL
Remote Output Control, 25 ft. (7.6 m) K857 • • • •

Remote Output Control, 100 ft. (30 m) K857-1 • • • •

Remote Control Cable Adapter (required for use of K857 and K857-1) K864 • • • •

Twist Mate Cable Plug for 1/0-2/0 (50-70 mm ) cable

™ 2
K852-70 • •

Twist Mate Cable Plug for 2/0-3/0 (70-95 mm ) cable

™ 2
K852-95 • •

Jumper Plug Kit K484(1) • • • •

Undercarriage – Hand moving K874 • •

Undercarriage – Hand moving K841 • •

Arc Tracker ™
K3019-1 • • • •

Weld Fume Control System — • • • •

WIRE FEEDER
LF-72, LF-74, LN-25 PRO — • • • •

LN-8, LN-9, LN-10, DH-10, LN-25 PRO Dual Power, FlexFeed 74 HT, Activ8
™ ™
— • •

2-YEAR EXTENDED WARRANTY AVAILABLE • • • •

(1)
Made to order.
For more information on our Extended Warranty program, visit www.lincolnelectric.com/warranty • Optional

www.lincolnelectric.com/mig-welders | 33
 MULTI-PROCESS WELDERS
MODEL OUTPUT PROCESS INPUT FEATURES
Submerged Arc
Current Range

Flux-Cored

CrossLinc®
Arc Gouge
MIG Pulse
Polarity

(Amps)

Phase

Hertz
Mode

Stick

MIG
TIG

INVERTER TECHNOLOGY
Invertec® V350 PRO CC/CV DC 5-425 1/3 50/60
FLEXTEC 350X®
CC/CV DC 5-425 3 50/60 •
FLEXTEC 500 ®
CC/CV DC 5-500 3 50/60
FLEXTEC® 500P CC/CV DC 5-500 3 50/60
FLEXTEC 650X®
CC/CV DC 10-815 3 50/60 •
PERFORMANCE MONITORING
Arc Tracker® CC/CV DC — 1 50/60
RECTIFIER TECHNOLOGY
Idealarc® DC400 CC/CV DC 60-500 3 60
Idealarc DC600
®
CC/CV DC 70-850 3 60
34 | www.lincolnelectric.com/tig-welders
KEY: Excellent Good Optional
MULTI-PROCESS WELDERS

Invertec® V350 PRO Processes

• Stick
Multi-Purpose Welder • DC TIG
• MIG
with Multiple Models • Pulsed MIG (Advanced
Process Panel only)
• Highly portable at less than 90 lb. (41 kg) • Flux-Cored
• Gouging
• Greater flexibility for input power for any
environment or location Output
• All input voltages and frequencies are both
single- and three-phase rated; no derating
necessary on single-phase Input

Literature
E5.91

Product Product Input Power Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range in (mm) lb (kg)
Invertec® V350 PRO K1728-5 200-208/230/ 350A/34V/60% 3-Ph: 50/42/28-26/23/18 5-425A 14.8 x 13.3 x 27.9 81
Construction 380-415/460/575/ 300A/32V/100% 1-Ph: 94/85/54/42/37 Max. OCV: (376 x 338 x 709) 36.7
1/3/50/60 80V DC
Factory K1728-6
Factory (Tweco )®
K1728-13 208/230/415/460/ 3-Ph: 41-39/36/23-22/19/16 86
575/1/3/50/60 1-Ph: 76/69/41/36/31 (39)
CE Model K1728-12 200-220/380-400/ 3-Ph: 350A/34V/60% 3-Ph: 48/28-27/26-24 86.5
415-440/1/3/50/60 1-Ph: 320A/33V/60% 1-Ph: 82/55-50/48-45 (37.4)
3-Ph: 300A/32V/100% 3-Ph: 41-37/28-22/22-21
1-Ph: 275A/31V/100% 1-Ph: 64/44-43/38-35
V350 PRO/LF-72 K2437-2 200-208/230/ 350A/34V/60% 3-Ph: 50/42/28-26/23/18 55.2 x 28.5 x 55.5 370
Ready-Pak® Pkg. 380-415/460/575/ 300A/32V/100% 1-Ph: 94/85/54/42/37 (1403 x 724 x 1410) (168)
1/3/50/60

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

FLEXTEC® 350X Processes

• Stick
A Rugged Mulit-Process Power Source • DC TIG
• MIG
for Maximum Flexibility • Flux-Cored
• Arc Gouging
• Simple operator panel minimizes setup time
Output
• Reliable components designed to run cool for
long life in high temperature environments
• Flexible enough to work with across-the-arc, Input
analog, digital or CrossLinc® wire feeders
• Embedded CrossLinc® Technology enables remote
procedure setting at the feeder without additional Literature
control cables to save time and improve weld quality E5.97

Product Product Input Power Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range in (mm) lb (kg)
FLEXTEC® 350X K4272-1 380/460/575/3/50/60 300A/32V/100% 26/23/18 5-425A 17 x 13 x 23 82
Standard 350A/34V/60% Max OCV (477 x 356 x 673) (37)
80V DC
Construction K4271-1 77 (35)

Standard/LF-72 Heavy K3438-1 — — 179

Duty One-Pak® Pkg. (81)
Standard/Flex Feed® 84 K3439-1 165
Single Bench Heavy Duty (75)
One-Pak® Pkg.
Construction/LN-25X K4278-1 127
One-Pak® Pkg. (58)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/multi-process-welders | 35
MULTI-PROCESS WELDERS

Idealarc® DC400 Processes

• Stick
Multiple Processes, Rugged Design • DC TIG
• MIG
• Flux-Cored
• Arc force control adjusts for a soft arc or a • Gouging
forceful driving arc in the stick/TIG mode
• Arc control adjustment changes the pinch effect Output
of the arc to control spatter, fluidity and bead
shape in the MIG/Flux-cored mode
• Voltage line compensation helps maintain weld Input
consistency

Literature
E5.20

Product Product Input Power Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range in (mm) lb (kg)
Idealarc® DC400 K1308-25 230/460/575/3/60 400A/36V/100% 3-Ph: 78/39/31A 60-500A 27.5 x 22.3 x 33.1 473
w/115V Duplex GFCI 450A/38V/60% 12-42V (698 x 566 x 840) (215)
500A/40V/50%
w/Multi-Process K1308-12 230/460/3/60 3-Ph: 78/39A
Switch

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

FLEXTEC® 500 Processes

• Stick
It Doesn’t Get Much Simpler Than Flextec® • DC TIG
• MIG
• Flux-Cored
• Streamlined operator panel minimizes • Arc Gouging
set up time
• Components designed to run cool for Output
long life in high temperature environments
• Compatible with a variety of wire feeders -
analog, digital and across-the-arc Input
• Premium multi-process arc characteristics
for wire stick and DC TIG processes

Literature
E5.97

Product Product Input Power Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range in (mm) lb (kg)
FLEXTEC® 500 K4091-1 380/460/575/3/50/60 500A/40V/60% 39/31/31 5-500A 18.8 x 14 x 26.5 125
Base Model 450A/38V/100% 33/27/27 (477 x 356 x 673) (57)
w/Flex Feed™ 74 HT K4093-1 53.375 x 34.375 x 42 352
Ready-Pak® Pkg. (1346 x 864 x 1067) (160)
w/LF-72 Ready-Pak® Pkg. K4094-1
w/LF-74 Ready-Pak Pkg.
®
K4095-1
w/LF-72 One-Pak® Pkg. K4096-1 — 185
(84)
w/Flex Feed® 84 K3440-1 — 206
One-Pak® Pkg. (93)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

36 | www.lincolnelectric.com/multi-process-welders
MULTI-PROCESS WELDERS

FLEXTEC® 500P Processes

• Stick
FLEXible Technology™ • DC TIG
• MIG
• Inverter-based technology saves energy • Flux-Cored
• Arc Gouging
• Small footprint and light weight improves
portability in shipyards, construction sites
Output
and other large work areas that require
operator mobility
• IP23 enclosure ensures protection against
Input
inclement weather and other harsh environments
• Run both analog and digital feeders with the
Flextec® 500P
• Synergistic and pulsing capabilities ensure a
more consistent bead appearance. Literature
E5.97

Product Product Input Power Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range in (mm) lb (kg)
FLEXTEC® 500P K4092-1 380/460/575/3/50/60 500A/40V/60% 3-Ph: 39/31/31A 5-500A 18.8 x 14 x 26.5 156
Base Model 450A/38V/100% 3-Ph: 33/27/27A (477 x 356 x 673) (71)
w/Power Feed® 84 K4097-1 393
Ready-Pak® Pkg. (178)
w/CE Filter Kit K4091-3 143
One-Pak® Pkg. (65)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Idealarc® DC600 Processes

• Stick
Idealarc® with Submerged Arc Capacity • DC TIG
• MIG
• Flux-Cored
• Full range output voltage control provides • Submerged Arc
easy operation and precise control • Gouging
• Voltage Reduction Device™ (VRD®) reduces open
circuit voltage for an additional level of safety Output
• Circuitry protected against moisture and
corrosive environments
Input

Literature
E5.40

Product Product Input Power Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range in (mm) lb (kg)
Idealarc® DC600 K1288-18 230/460/3/60 600A/44V/100% 3-Ph: 108/54A CV: 70-780A, 30.7 x 22.2 x 38 554
w/Multi-Process 680A/44V/60% 13-44V (781 x 565 x 965) (251)
Switch
CC: 90-780 A,
w/Meters K1288-17 24-42V
K1288-22 230/460/575/3/60 3-Ph: 108/54A/43.2A
w/VRD ®
K1288-28 (1)

(1)
Made to order. Note » 50 Hertz models also available.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/multi-process-welders | 37
MULTI-PROCESS WELDERS

FLEXTEC® 650X Processes

• Stick
Multi-Process Power for • DC TIG
• MIG
Heavy Duty Applications • Flux-Cored
• Arc Gouging
• CrossLinc® Technology delivers full functionality
without control cables for greater productivity,
Output
enhanced quality and improved job site safety
• Compatible with most Lincoln Electric feeders
including portable across-the-arc, CrossLinc®,
Input
ArcLink® and common bench or boom models
• Engineered for outdoor use and harsh
environments (IP23 rated)
• Substantial gouging capability with up to a
1/2 in. (12.7 mm) carbon Literature
E5.97

Product Product Input Power Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range in (mm) lb (kg)
FLEXTEC® 650X K3425-1 380/460/575/3/50/60 750/44/60%(1) 61/50/40A 40-815A 21.8 x 16.1 x 29.3 165
Base Model (554 x 409 x 584) (75)
650/44/100%(1) 57/47/38A
w/LF-74 HD One-Pak® Pkg. K3513-1 —
w/Flex Feed 84 One-Pak Pkg.
® ®
K3514-1 GTAW: 750/34/60% GTAW: 10-815A

w/CE Filter One-Pak® Pkg. K3515-1 GTAW: 650/34/100% SMAW: 15-815A

w/LF-72 Ready-Pak Pkg.
®
K3511-1
w/LF-74 Ready-Pak® Pkg. K3512-1

(1)
Output is limited to 600A/100% and 700A/60% when used with the K3091.1 Multi-Process Switch

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Arc Tracker® Processes

• DC Arc Welding
Monitor Weld and Operator Performance Circuits Only
(10-1000A @
100% Duty Cycle)
• Advanced digital controls sample the welding • Any DC Polarity
arc at extremely high speeds Welding Process
• Any DC Welding
• Simple plug-and-play design enables you to Power Source
connect to any DC welding circuit, attach voltage
leads and immediately monitor arc performance
Output
• Easily calibrated for use in factory quality systems
• CheckPoint™ – A cloud-based system to view
or analyze your welding data. Track equipment Input
usage, store weld data, configure fault limits
and more
• Weld Data Monitoring – Compatible with CheckPoint™,
this tool provides the ability to view and analyze your Literature
welding data, track equipment usage, store weld data, E5.99
configure fault limits and more.

Product Product Input Power Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range in (mm) lb (kg)
Arc Tracker™ K3019-1 120-230/1/50/60 NEMA EW1: 0.8A @ 120V AC — 12 x 9 x 15 20
(US/Int’l.) 1,000/44/100% DC (305 x 220 x 645) (9.0)
IEC60974-1:
1,000/44/100% DC

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

38 | www.lincolnelectric.com/multi-process-welders
MULTI-PROCESS WELDERS

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

Invertec® V350 PRO FLEXTEC® 350X

Ready-Pak Package (K2437-2)
®
FLEXTEC® 350X Standard/LF-72 Heavy Duty
• V350 PRO Factory Model (K1728-6) One-Pak® Package (K3438-1)
• LF-72 Heavy Duty Wire Feeder (K2327-6) • FLEXTEC® 350X Standard Model (K4272-1)
• Magnum® PRO 350 Gun & Cable Assembly, • Input Power Cord, 8.5 ft (2.6 m)
15 ft. (4.6 m) • LF-72 Bench Model, Heavy Duty
• Work & Wire Feeder 2/0 Welding Cable Package, Wire Reel Stand (K2327-7)
10 ft. (3.0 m) • Magnum® PRO Curve™ 300 Gun & Cable
• Harris® Gas Regulator/Flowmeter and Ready-Pak, 15 ft (4.5 m)
10 ft. (3.0 m) Hose Kit (3100211) • 2-Roll Drive Roll and Wire Guide Combination Kit
• Inverter and Wire Feeder Cart (K1764-1) 0.035-0.045 (0.9-1.1 mm) Solid Wire
• Tweco® Connector Cable Package
(includes 10 ft. (3 m) Work Clamp & Cable and
10 ft (3 m) Electrode Cable)
• Harris® Gas Regulator/Flowmeter and
10 ft. (3.0 m) Hose Kit (3100211)

FLEXTEC® 350X Standard/Flex Feed® 84 Heavy Duty

One-Pak® Package (K3439-1)
• FLEXTEC® 350X Standard Model (K4272-1)
• Input Power Cord, 8.5 ft (2.6 m)
• Flex Feed® 84 Single Bench Model,
Heavy Duty Wire Reel Stand (K5000-2)
• 4-Roll Drive & Wire Guide Kit, 0.040-0.045
(1.0-1.1 mm) Solid Wire
• Magnum® PRO Curve™ 300 Gun & Cable
Ready-Pak, 15 ft (4.5 m)
• Tweco® Connector Cable Package (includes
10 ft (3 m) Work Clamp & Cable and 10 ft (3 m)
Electrode Cable)
• Harris® Gas Regulator/Flowmeter and
10 ft. (3.0 m) Hose Kit (3100211)

FLEXTEC® 350X Construction/LN-25X

One-Pak® Package (K4278-1)
• FLEXTEC® 350X Construction Model (K4271-1)
• Input Power Cord, 8.5 ft (2.6 m)
• LN-25X (K4267-1)
• 2-Roll Drive Roll and Wire Guide Kit,
0.045 (1.1 mm) Cored
• Magnum® PRO Curve™ 300 Gun & Cable
Ready-Pak, 15 ft (4.5 m)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/multi-process-welders | 39
MULTI-PROCESS WELDERS

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

FLEXTEC® 500 FLEXTEC® 500, con’t.

FLEXTEC 500/Flex Feed 74 HT
® ™ FLEXTEC® 500/LF-72 One-Pak® Package (K4096-1)
Ready-Pak® Package (K4093-1) • FLEXTEC® 500 (K4091-1)
• FLEXTEC® 500 (K4091-1) • LF-72 Bench Model, Standard Duty (K2327-5)
• Flex Feed™ 74 HT (K3883-13) • 3/0 Welding Cable, 10 ft. (3.0 m)
• 3/0 Welding Cable, 10 ft. (3.0 m) • Work Lead Package, 15 ft. (4.5 m) cable
• Work Lead Package, 15 ft. (4.5 m) cable • Harris® Gas Regulator/Flowmeter and
• Harris® Gas Regulator/Flowmeter and 10 ft. (3.0 m) Hose Kit (3100211)
10 ft. (3.0 m) Hose Kit (3100211) • 2-Roll Drive and Wire Guide Kit,
• Inverter and Wire Feeder Cart (K3059-4) 0.035-0.045 (0.9-1.1 mm) Solid Wire
• Inverter Cart Mounting Bracket Kit
• FLEXTEC® 500/500P Locking Foot Kit FLEXTEC® 500/Flex Feed® 84
• Magnum® PRO Curve™ 400 Gun and Cable Ready-Pak® Package (K3440-1)
Ready-Pak ®, 15 ft. (4.5 m) • FLEXTEC® 500 (K4091-1) Shown:
Flextec® 500/LF-72
• Flex Feed® 84 Single Bench Model (K5000-2) Ready-Pak® Package
FLEXTEC® 500/LF-72 Ready-Pak® Package (K4094-1) • 3/0 Welding Cable, 10 ft. (3.0 m)
• FLEXTEC® 500 (K4091-1) • Work Lead Package, 15 ft. (4.5 m) cable
• LF-72 Bench Model, Heavy Duty (K2327-7) • Harris® Gas Regulator/Flowmeter and
• 3/0 Welding Cable, 10 ft. (3.0 m) 10 ft. (3.0 m) Hose Kit (3100211)
• Work Lead Package, 15 ft. (4.5 m) cable • 4-Roll Drive and Wire Guide Kit,
0.040-0.045 (1.0-1.1 mm) Solid Wire
• Harris® Gas Regulator/Flowmeter and
10 ft. (3.0 m) Hose Kit (3100211) • Magnum® PRO Curve™ 400 Gun and Cable
Ready-Pak ®, 15 ft. (4.5 m)
• Inverter and Wire Feeder Cart (K3059-4)
• 2-Roll Drive and Wire Guide Kit,
0.035-0.045 (0.9-1.1 mm) Solid Wire
• FLEXTEC® 500/500P Locking Foot Kit FLEXTEC® 500P
• Magnum® PRO Curve™ 400 Gun and Cable FLEXTEC® 500P/Power Feed® 84
Ready-Pak ®, 15 ft. (4.5 m) Ready-Pak® Pkg. (K4097-1)
• FLEXTEC® 500P (K4092-1)
FLEXTEC® 500/LF-74 Ready-Pak® Package (K4095-1) • Power Feed® 84, Heavy Duty Wire Reel Stand
• FLEXTEC® 500 (K4091-1) (K3328-13)
• LF-74 Bench Model, Heavy Duty (K2426-5) • Magnum® PRO Curve™ 400 Gun and Cable Assembly
• Magnum® PRO Curve™ 400 Gun & Cable Assembly • Flextec® 500/500P Locking Foot Kit
• 3/0 Welding Cable, 10 ft. (3.0 m) • 3/0 Welding Cable, 10 ft. (3.0 m)
• Work Lead Package, 15 ft. (4.5 m) cable • Work Lead Package, 15 ft. (4.5 m) cable
• Harris® Gas Regulator/Flowmeter and • Harris® Gas Regulator/Flowmeter and
10 ft. (3.0 m) Hose Kit (3100211) 10 ft. (3.0 m) Hose Kit (3100211)
• Inverter and Wire Feeder Cart (K3059-4) • Inverter and Wire Feeder Cart
• 4-Roll Drive and Wire Guide Kit, • Inverter Cart Mounting Bracket
0.035-0.045 (0.9-1.1 mm) Solid Wire
• FLEXTEC® 500/500P Locking Foot Kit
FLEXTEC® 500P w/CE Filter Kit One-Pak® (K4097-1)
• Magnum® PRO Curve™ 400 Gun and Cable
Ready-Pak ®, 15 ft. (4.5 m) • FLEXTEC® 500P (K4092-1)
• Flextec 500 CE Filter Kit

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

40 | www.lincolnelectric.com/multi-process-welders
MULTI-PROCESS WELDERS

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

FLEXTEC® 650X FLEXTEC® 650X, con’t.

FLEXTEC 650X/LF-72 Ready-Pak Pkg. (K3511-1)
® ® FLEXTEC® 650X/LF-74 One-Pak® Pkg. (K3513-1)
• FLEXTEC® 650X (K3425-1) • FLEXTEC® 650X (K3425-1)
• LF-72 Wire Feeder Bench Model, Heavy Duty • LF-74 Wire Feeder Bench Model, Heavy Duty
(no gun) (K2327-7) (no gun) (K2426-5)
• 3/0 Welding Cable, 10 ft (3.0 m) Lug to Lug • 3/0 Welding Cable, 10 ft (3.0 m) Lug to Lug
• 4/0 Work Lead Package, 15 ft. (4.6 m) Cable • 4/0 Work Lead Package, 15 ft. (4.6 m) Cable
• Harris® Gas Regulator/Flowmeter and • Harris® Gas Regulator/Flowmeter and
10 ft. (3.0 m) Hose Kit (3100211) 10 ft. (3.0 m) Hose Kit (3100211)
• Inverter and Wire Feeder Cart • 4-Roll Drive Roll and Wire Guide Kit,
• 2-Roll Drive Roll and Guide Tube Kit, 1/16 in. (1.6 mm) Cored
0.045 in. (1.2 mm) Solid Wire • 4-Roll Drive Roll and Wire Guide Combination Kit,
• 2-Roll Drive Roll and Wire Guide Combination Kit, 0.035-0.045 in. (0.9-1.1 mm) Solid Wire
0.035-0.045 in. (0.9-1.1 mm) Solid Wire • Magnum® PRO Curve™ 400 Gun and Cable, Shown:
• Magnum® PRO Curve™ 400 Gun and Cable 15 ft (4.6 m) FLEXTEC® 500P/Power Feed® 84
Ready-Pak ® Pkg.
Ready-Pak ®, 15 ft (4.6 m) • Gun Connector Kit
• Liner, .052-1/16 in. (1.3-1.6 mm) Diameter,
FLEXTEC® 650X/CE Filter One-Pak® Pkg. (K3515-1) 15 ft (4.6 m) Length
• FLEXTEC® 650X (K3425-1)
• FLEXTEC® 650X CE Filter (K3129-1) FLEXTEC® 650X/Flex Feed® 84 One-Pak® Pkg. (K3514-1)
• FLEXTEC® 650X (K3425-1)
FLEXTEC® 650X/LF-74 Ready-Pak® Pkg. (K3512-1) • Flex Feed® 84 Single Bench Model, Heavy Duty
(K5000-2)
• FLEXTEC® 650X (K3425-1)
• 3/0 Welding Cable, 10 ft (3.0 m) Lug to Lug
• LF-74 Wire Feeder Bench Model, Heavy Duty
(no gun) (K2426-5) • 4/0 Work Lead Package, 15 ft. (4.6 m) Cable
• 3/0 Welding Cable, 10 ft (3.0 m) Lug to Lug • Harris® Gas Regulator/Flowmeter and
10 ft. (3.0 m) Hose Kit (3100211)
• 4/0 Work Lead Package, 15 ft. (4.6 m) Cable
• 4-Roll Drive Roll and Wire Guide Kit,
• Harris® Gas Regulator/Flowmeter and 1/16 in. (1.6 mm) Cored
10 ft. (3.0 m) Hose Kit (3100211)
• Magnum® PRO Curve™ 400 Gun and Cable,
• Inverter and Wire Feeder Cart 15 ft (4.6 m)
• 4-Roll Drive Roll and Wire Guide Kit, • Gun Connector Kit
1/16 in (1.6 mm) Cored
• Liner, .052-1/16 in. (1.3-1.6 mm) Diameter,
• 4-Roll Drive Roll and Wire Guide Combination Kit, 15 ft (4.6 m) Length
0.035-0.045 in. (0.9-1.1 mm) Solid Wire
• Magnum® PRO Curve™ 400 Gun and Cable,
15 ft (4.6 m)
• Gun Connector Kit Arc Tracker™
• Liner, 052-1/16 in. (1.3-1.6 mm) Diameter, Base Model (K3019-1)
15 ft (4.6 m) Length • Detachable input cord 6 ft. (1.8 m) with NEMA 5-15P
plug and an IEC 60320 plug receptacle.
• Polarity specific arc voltage remote sense leads
15 ft. (4.6 m) (Qty. 2)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/multi-process-welders | 41
MULTI-PROCESS WELDERS

Accessories

Idealarc® DC600
Idealarc® DC400

FLEXTEC® 650X
FLEXTEC® 500P
FLEXTEC® 350X

FLEXTEC® 500

Arc Tracter®
V350 PRO
Invertec®

Tweco Factory

w/Multi-Process

w/Multi-Process
Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Model
Base Model

Base Model

Base Model
Base Model

Base Model

Model

Model

Base Model

Base Model
Construction

Construction
Adv. Process

Standard

w/Meters

w/Meters

w/VRD®
Factory

w/GFCI

Switch

Switch
K1308-25 Base

K1288-22 Base

K1288-28 Base
K1288-18
K1308-12

K1288-17
K1728-13

K4092-1
K1728-6

K3425-1
K4091-1

K3019-1
K4272-1
K1728-7

K4271-1
K1728-5
Product Name Product No.
GENERAL
Deluxe Adjustable Gas Regulator & Hose Kit, K586-1 • • • • • • • • • • • • • • •
4.3 ft. (1.3 m)
Work and Wire Feeder 2/0 Weld Cable Package, 10 ft. K1803-1 • • • • • • • • • • • • • • •
(3.0 m)
3/0 Welding Cable, 10 ft. (3.0 m) K1842-10 • • • • • • • • •

Twist Mate™ Cable Plug for 1/0-2/0, 50-70 mm2 cable K852-70 • • •

Twist Mate™ Cable Plug for 2/0-3/0, 70-95 mm2 cable K852-95 • • •

Twist Mate Receptacle for 1/0-2/0, 50-70 mm cable

™ 2
K1759-70 • • •

Twist Mate™ Receptacle for 2/0-3/0, 70-95 mm2 cable K1759-95 • • •

Twist Mate to Lug Cable Adapter

™
K2176-1 • • •

Tweco® Style Cam-Lock Adapter Plug K2946-1 •

LC-40 – Tweco Style Plug

®
K3416-70 • • •
(male, 1/0 thru 2/0), 1/0-2/0 (50-70 mm2 )
LC-40HD – Tweco® Style Plug K3416-90 • • •
(male, 3/0 thru 4/0), 2/0-4/0 (70-70-95 mm2 )
LC-40 – Tweco® Style Receptacle K3417-70 • • •
(female, 1/0 thru 2/0), 1/0-2/0 (50-70 mm2 )
LC-40HD –Tweco-Style Receptacle K3417-90 • • •
(female, 3/0 thru 4/0), 2/0-4/0 (70-70-95 mm2 )
Inverter and Wire Feeder Cart K1764-1 • • • • • • • • •

(4)
Single Cylinder Inverter and Wire Feeder Cart K3059-4 • • • • •

(4)
Dual Cylinder Inverter and Wire Feeder Cart K3059-5 • • • • •

Dual Cylinder Mounting Kit K1702-1 • • • •

Inverter Cart Mounting Bracket Kit K4068-1 • • • • •

Undercarriage – Hand moving K841 • •

Undercarriage – Hand moving K842 • • • •

All-Terrain Undercarriage K1737-1 • • • •

Universal Adapter Plug(2) K867 • • • •

Work Lead Package K2149-1 • • • • • • • • •

Paralleling Kit (codes above 10500)(3) K1611(2) • • •

Paralleling Kit (codes below 10500)(3) K1897-1 • • •

Arc Tracker ™
K3019-1 • • • • • • • • • • • •

FLEXTEC® 350 Locking Foot Kit K4424-1 • •

FLEXTEC 500 / 500P Locking Foot Kit

®
K3056-2 • •

Multi-Process Switch(1) K3091-1 • • • • •

Multi-Process Switch K804-1 • • • • • •

FLEXTEC 350X CE Filter Kit (380-575V AC)

®
K4420-1 • •

FLEXTEC® 500 CE Filter Kit (380-575V AC) K3129-2 • •

(1)
Requires K3056-1 Base Mounting Kit (2)
Made to order (3)
Cannot be used with VRD® models (4)
Requires K4068-1 Inverter Cart Mounting Kit • Optional

42 | www.lincolnelectric.com/multi-process-welders
MULTI-PROCESS WELDERS

Accessories

Idealarc® DC600
Idealarc® DC400

FLEXTEC® 650X
FLEXTEC® 500P
FLEXTEC® 350X

FLEXTEC® 500

Arc Tracter®
V350 PRO
Invertec®

Tweco Factory

w/Multi-Process

w/Multi-Process
Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Model

Base Model

Base Model

Base Model

Model

Model

Base Model

Base Model
Construction

Construction
Adv. Process

Base Model

Base Model
Standard

w/Meters

w/Meters

w/VRD®
Factory

w/GFCI

Switch

Switch
K1308-25 Base

K1288-22 Base

K1288-28 Base
K1288-18
K1308-12

K1288-17
K1728-13

K4092-1
K1728-6

K3425-1
K4091-1

K3019-1
K4272-1
K1728-7

K4271-1
K1728-5
Product Name Product No.
GENERAL, CON’T.
FLEXTEC® 650 CE Filter Kit (380-575V AC) K3129-1 •

GFCI Kit K3157-1 •

Harris Model 355 Flowmeter Regulator & Hose, 10 ft.

®
3100211 • • • • •
(3.0 m)
Weld Fume Control System — • • • • • • • • • • • • • • •

STICK
CrossLinc® Remote K4345-1 • • •

Accessory Kit, 400 Amp K704 • • • • • • • • •

Remote Output Control, 6-pin, 25 ft. (7.6 m) K857 • • • • • • • • • •

Remote Output Control, 6-pin, 100 ft. (30.5 m) K857-1

(compatible with FLEXTEC® machines with use • • • • • • • • • • • • • • •
of K2909-1, 12-6 pin adapter)
Remote Output Control, 12-pin, 25 ft. (7.6 m) K857-2 • • • • •

Remote Output Control, 12-pin, 100 ft. (30 m) K857-3 • • • • •

Remote Control Cable Adapter K864 • • • • • •

TIG
TIG Module K930-2 • • • • • • • • • •

12-pin to 6-pin Adapter K2909-1 • • • • •

Adapter Cable – Male 14-pin Control Cable K1798 • • • • • •

to Terminal Strip
Hand Amptrol™ (Rotary Track Style) K963-3 • • • • • • • • • • • • • • •

Foot Amptrol with 6-pin Connector

™
K870 • • • • • • • • • • •

Foot Amptrol™ with 12-pin Connector K870-2 • • •

Wireless Foot Pedal K4217-1 • • • • •

Amptrol Adapter Kit

™
K843 • • • • • •

Arc Start™ Switch K814 • • • • • • • • •

Invertec TIG Solenoid Kit

®
K1762-2 • • • •

Twist Mate™ Torch Adapter, PTA-9, -17 K1622-1 • • • •

Twist Mate Torch Adapter, PTA-26

™
K1622-3 • • • •

Twist Mate Torch Adapter, Water-Cooled

™
K1622-4 • • • •

Twist Mate™ Torch Adapter (with separate gas) K960-1 • • • •

TIG-Mate 17V TIG Torch Starter Kit (air-cooled)

™
K2265-1 • • • •

TIG-Mate™ 17 TIG Torch Starter Kit (air-cooled) K2266-1 • • • •

TIG-Mate 20 TIG Torch Starter Kit (water-cooled)

™
K2267-1 • • • •

Docking Kit K939-1 • • • • • •

Deluxe Adjustable Gas Regulator & Hose Kit, K586-1 • • • • • • • • • • • • • • •

4.3 ft. (1.2 m)

• Optional

www.lincolnelectric.com/multi-process-welders | 43
MULTI-PROCESS WELDERS

Accessories

Idealarc® DC600
Idealarc® DC400

FLEXTEC® 650X
FLEXTEC® 500P
FLEXTEC® 350X

FLEXTEC® 500

Arc Tracter®
V350 PRO
Invertec®

Tweco Factory

w/Multi-Process

w/Multi-Process
Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Model

Base Model

Base Model

Base Model

Model

Model

Base Model

Base Model
Construction

Construction
Adv. Process

Base Model

Base Model
Standard

w/Meters

w/Meters

w/VRD®
Factory

w/GFCI

Switch

Switch
K1308-25 Base

K1288-22 Base

K1288-28 Base
K1288-18
K1308-12

K1288-17
K1728-13

K4092-1
K1728-6

K3425-1
K4091-1

K3019-1
K4272-1
K1728-7

K4271-1
K1728-5
Product Name Product No.
MIG
Magnum® PRO AL G225A Push/Pull Air-Cooled Push- K3355-2
Pull Gun, 12 pin, 25 ft. (7.6 m)
Magnum® PRO AL G450W Push/Pull K3357-2
Water-Cooled Push-Pull Gun, 12 pin, 25 ft. (7.6 m)
Magnum® PRO Curve™ 300 Gun and Cable Ready-Pak, K2951-2-10-45 • • • • • • • • • • • • • • •
15 ft. (4.5 m)
Magnum® PRO Curve™ 400 Gun and Cable Ready-Pak, K2952-2-10-45 • • • • • • • • • • • • • • •
15 ft. (4.5 m)
WIRE FEEDERS
Flex Feed® 74 HT, FlexFeed® 84, LF-72, LF-74, — • • • • • • • • • • • • • •
LN-25® PRO Dual Power, Activ8®
LN-25® PRO — • • • • • • • • • • • • • • •

NA Series — •

LT-7 — • • • • •

Activ8X w/CrossLinc Technology,

™
— • • •
LN-25X™ w/CrossLinc Technology
LN-23P — • • • • • • • • • • • • •

Power Feed 84®

— • • • •

Power Feed® 25M — • • •

Power Feed 25M Aluminum Case

®
— • •

2-YEAR EXTENDED WARRANTY AVAILABLE — • • • • • • • • • • • • • • •

For more information on our Extended Warranty program, visit www.lincolnelectric.com/warranty • Optional

44 | www.lincolnelectric.com/multi-process-welders
 ADVANCED PROCESS WELDERS
MODEL OUTPUT PROCESS INPUT FEATURES Inverter Efficiency
Waveform Control

Communication
ArkLink® Digital
Current Range

Tandem MIG®

Technology®
Flux-Cored
Arc Gouge
AC/DC TIG

MIG STT®
Polarity

AC MIG
(Amps)

Pulsed

Phase

Hertz
Mode

Stick

MIG
TIG

Invertec® STT® ll STT® DC 0-450 PEAK

0-125 BKGRND 3 50/60 • •
Power Wave®
Advanced Module CC/CV AC/DC NA NA NA • • •
Power Wave® STT® Module STT® DC NA NA NA • • •
Power Wave C300®
CC/CV DC 5-300 1,3 50/60 • • •
Power Wave S350®
CC/CV DC 5-350 1,3 50/60 • • •
Power Wave S500®
CC/CV DC 5-550 3 50/60 • • •
Power Wave® S700 CC/CV DC 20-900 3 50/60 • • •
45 | www.lincolnelectric.com/tig-welders
KEY: Excellent Good Optional
ADVANCED PROCESS WELDERS

Invertec® STT® II Processes

• MIG-STT®
Excellent Penetration, Higher Productivity
Output
• Minimal spatter; can replace TIG welding in
the root pass
• Controlled low heat input results in reduced Input
distortion on thin materials
• Tremendous shielding gas flexibility (either
low-cost 100 % CO2 or Argon/CO2 blends)

Literature
E4.52

Product Product Input Power Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range in (mm) lb (kg)
Invertec® STT® ll K1525-1 208/230/460/3/60 225A/29V/60% 32/30/16A CURRENT 23.2 x 13.2 x 24.4 117
200A/28V/100% Peak: (589 x 336 x 620) (53)
K1526-1 200-208/220-230/ 33/30/15/17/16A 0-450A
380-415/440-460/3/50/60
K1526-2 200/208/380/400/ 36/34/20/19/18A Background:
415/3/50/60 0-125A

Max OCV:
85V

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Power Wave® C300 Processes

• Stick
Power and Wire Combined • DC TIG
• Pulsed DC TIG
• MIG
• Welding output remains constant throughout the • Pulsed MIG
entire input voltage range • Flux-Cored
• CheckPoint™ technology enables you to
track usage, store weld data, configure fault Output
limits and more
• Ideal for educational settings and light to
medium fabrication shops Input

Literature
E5.100

Product Product Input Power Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range in (mm) lb (kg)
Power Wave® C300(1) K2675-2 3-Ph 50/60: 300A/29V/40% 3-Ph/40% Duty Cycle: 5-300A DC 18.8 x 14 x 24.8 100
Base Model 208/220-230/380/415/460/575 250/27V/100% 30/28/16/14/11A (478 x 356 x 630) (47.6)
WFS:
Steel Ready-Pak® Pkg. K2774-2 1-Ph 50/60: 1-Ph/40% Duty Cycle: 50-700 ipm 33 x 20 x 42 180
208/220-230 53/48/29A (1.27-17.8 m/min) (838 x 508 x 1067) (81.6)
Educational K2774-4
Ready-Pak® Pkg.

(1)
Wire Size Range, in.(mm) : Solid - 0.023-0.045 (0.6-1.2) ; Cored - 0.035-0.045 (0.9-1.2)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

46 | www.lincolnelectric.com/advanced-process-welders
ADVANCED PROCESS WELDERS
Processes
Power Wave® S350 • Stick
• DC TIG
Portable, Versatile, Powerful • Pulsed DC TIG
• MIG
• Equipped with a complete portfolio of high-performance • Pulsed MIG
• Flux-Cored
wave forms, providing flexibility to tackle any welding
application Output
• Comes standard with Power Wave Manager software ®

tools, simplifying welding setup and operation

• CheckPoint™ software allows you to track equipment Input
usage, store weld data, configure fault limits and more
• Compact and durable case is IP23-rated to withstand
harsh environments
Literature
E5.110

Product Product Input Power Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range in (mm) lb (kg)
Power Wave® S350 K2823-3 208/230/380-415/460/ GMAW: 350A/31.5V/40%(1) 3-Ph/40% Duty Cycle: 5-350A(3) 20.40 x 14 x 24.80 85
Base Model 575/1/3/50/60 300A/29V/100% 39/35/19/17/14A (518 x 356 x 630) (38.6)
Ready-Pak® Pkg. K3005-3 SMAW: 325A/33V/40%(1) 3-Ph/100% Duty Cycle: 52 x 39 x 26 450
(Steel) 250A/30V/100% 31/28/15/14/11A (1321 x 991 x 660) (204.1)
Air-Cooled Magnum® K3552-1
PRO Front Trigger GTAW-DC: 350A/24V/40% 1-Ph/40% Duty Cycle:
Aluminum 15 ft. 300A/22V/100% 60/67(2)/na/na/na
(4.5 m) One-Pak® Pkg.
1-Ph/100% Duty Cycle:
Air-Cooled Magnum® K3552-2 60/53/na/na/na
PRO Front Trigger
Aluminum 25 ft.
(7.6 m) One-Pak® Pkg.
Air-Cooled Magnum® K3553-1
PRO Pistol Grip
Aluminum 25 ft.
(7.6 m) One-Pak® Pkg.
Water-Cooled K3554-1
Magnum® PRO Pistol
Grip Aluminum 25 ft.
(7.6 m) One-Pak® Pkg.

(1)
230 Volt/1 Phase inputs, the peak rating is at 30% duty cycle, except for GTAW. (2)
Based on the U.S. National Electrical Code. (3)
On 208 Volt inputs, the maximum output is limited to 300 amps.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/advanced-process-welders | 47
ADVANCED PROCESS WELDERS

Power Wave® S500 Processes

• Stick
• DC TIG
Multi-Process Power and Versatility • Pulsed DC TIG
• MIG
• Equipped with a complete portfolio of • Pulsed MIG
high-performance wave forms, providing • Flux-Cored
flexibility to tackle any welding application
• Comes standard with Power Wave Manager™ Output
software tools, simplifying welding setup
and operation
• CheckPoint™ software allows you to track Input
equipment usage, store weld data, configure
fault limits and more
• Compact and durable case is IP23-rated to
Literature
withstand harsh environments E5.115

Product Product Input Power Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range in (mm) lb (kg)
Power Wave® S500 K2904-1 208/230/380-415/ GMAW: 550A/41.5V/40% 3-Ph/40% Duty Cycle: 5-550A 22.5 x 14 x 24.8 150
Base Model 460/575/3/50/60 450A/36.5V/100% 81/73/41/37/29A (571 x 355 x 630) (68)
w/Power Feed® 84 K3187-2 SMAW: 550A/42V/40% 3-Ph/100% Duty Cycle: 51.7 x 34.4 x 53.4 376
Ready-Pak® Pkg. 450A/38V/100% 60/54/31/27/21A (1313 x 874 x 1356) (171)
w/Power Feed® 84 K3186-2 — —
One-Pak® Pkg. GTAW-DC: 550A/32V/40%
450A/38V/100%

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Power Wave® S700 Processes

• Stick
High Output Power for • TIG
• MIG
Automated Environments • Pulsed MIG
• Flux-Cored
• Intended for high amperage, high duty • Tandem MIG®
cycle semiautomatic, mechanized or robotic • Carbon Arc Gouging
applications in the heavy equipment,
transportation and other industries Output
• Add AutoDrive® 19 Tandem modules to access
waveform modes specifically designed for
Synchronized Tandem MIG Input

Literature
E5.120

Product Product Input Power Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range in (mm) lb (kg)
Power Wave® S700 K3279-1(1) 380-415/440-460/500/ 700/44/100% 55/46/42/38A 20-900A 30.1 x 19.1 x 36.7 385
575/3/50/60 (900A/44/60%) (74/60/56/49A) (765 x 485 x 932) (175)
K3557-1 200/230/3/50/60 106/92A
(138/120A)

(1)
Internal filter is required to meet CE conducted emission requirements. K2444-4 CE Filter must be used with K3279-1.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

48 | www.lincolnelectric.com/advanced-process-welders
ADVANCED PROCESS WELDERS

Power Wave® STT® Module Processes

• GMAW-STT®
Add STT® for Exceptional Arc Control
Output
• Add STT® (Surface Tension Transfer®) process
capability to any S-Series Power Wave for
enhanced puddle and burnthrough control
Input
• Improve performance on thin metal or critical
pipe root pass welding applications
• Modular design allows easy connection and
fast digital communication with compatible
Power Wave® models Literature
E5.190

Product Product Input Power Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range in (mm) lb (kg)
Power Wave® K2902-1 40V DC 100% Duty Cycle(1): 450A n/a n/a 11.5 x 14 x 24.8 47
STT® Module US/Int’l (292 x 356 x 630) (21.3)
Model 60% Duty Cycle(1): 500A
K2921-1 40% Duty Cycle(1): 550A
CE Model
Peak (Max)(1): 750A

(1)
Dependent on host welding power source output.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Power Wave® Advanced Module Processes

• GMAW-STT®
• AC-GMAW-P
Expand Your Welding Capabilities • GTAW: AC, DC-, AC/DC

• Adds AC waveform control for Pulsed MIG,

and Gas Tungsten Arc (TIG) Welding Output

• Hi-frequency starting for TIG welding capability

• Modular design allows easy connection and Input
fast digital communication with compatible
Power Wave® models
• Includes STT process capability, making this
module ideal for automotive, pipe and thin Literature
metal applications E5.191

Product Product Input Power Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range in (mm) lb (kg)
Power Wave® K2912-1 40V DC 100% Duty Cycle(1): n/a n/a 11.5 x 14 x 25 70.5
Advanced Module 300A @ 32V (292 x 356 x 635) (32)

40% Duty Cycle(1):

350A @ 34V

Peak (Max)(1): 600A

(1)
Host welding power source will be limited to these outputs.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/advanced-process-welders | 49
ADVANCED PROCESS WELDERS

Power Wave® Wireless Connection

• Wi-Fi 802.11 a/b/g/n
Connectivity Module (Wi-Fi 1/2/3/4)
• Bluetooth 4.1
Simplifying Machine Connectivity • Ethernet

• Plant-Wide Connection – Easily connect existing

or remote Power Wave® systems for complete Compatible Power Sources
visibility to your welding operation. Power Wave® S350
Power Wave® S500
• Quick & Easy Installation – Modular design allows
Power Wave® R450
for hassle-free installation without the need for Power Wave® R500
extensive machine downtime. Power Wave® S700
• Local Display - Convenient voltage and amperage
metering directly on the power source
Literature
MC18-12

Product Name Product Number Connectivity Encryption

Power Wave Wireless
®
K4352-1 Wi-Fi 802.11 a/b/g/n @ 2.4 GHz WEP
Connectivity Module Bluetooth 4.1 and earlier WPA
Ethernet Port WPA2
Power Wave® Wireless K4352-2 WPA ENT
Connectivity Module (S700 only)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

50 | www.lincolnelectric.com/advanced-process-welders
ADVANCED PROCESS WELDERS

Premium
LINCOLN ELECTRIC Synchronized Tandem MIG®

Advanced MIG AC Aluminum Pulse AC-STT ®

Rapid Z™
Low Fume Pulse™

(GMAW) Processes
Rapid X™
STT
®

PROCESSES
Advanced
RapidArc®
Your local Lincoln Electric distributor and HyperFill™
Lincoln Electric Technical Sales Representative, Precision Pulse™
backed by our Applications Engineering
Pulse/CC Pulse
Department, can help you select the advanced
Power Mode® Power Mode®
process and equipment that can improve your
Standard
results. Request a demo to see how we can
CV Short Globular CV Spray
help reduce costs, enhance quality or increase
productivity in your operations. WIRE FEED SPEED

Synchronized Steel » Synchronized Tandem MIG® overcomes deposition rate limitations of a single wire by Power Wave®
Tandem MIG® using two wires and specific waveforms. The result is deposition rates nearly double rates S700, S500, R450
possible with a single wire as well as faster travel speeds.
Rapid Z™ Zinc » Rapid Z™ is a process designed to increase stability and travel speeds, while reducing Power Wave® S500, S350, R450
spatter and internal porosity on Zinc coated materials. all w/Advanced Module
Power Wave® R450 w/STT® Module
AC Aluminum Pulse Aluminum » With the help of the Power Wave Advanced Module, GMAW aluminum welding
®
Power Wave® S500, S350, R450
results can be improved over traditional DC positive aluminum MIG welding. By switching all w/Advanced Module
the polarity of the arc, heat input is reduced and deposition rates are enhanced. Power Wave® R450 w/STT® Module
AC-STT ®
Steel » Based off of the patented STT process, AC-STT combines the proven spatter-
® ®
Power Wave® S500, S350, R450, R450, R350
reducing technology of the STT® waveform with the balanced heat-input characteristics of all w/Advanced Module
AC GMAW, producing an advanced shortcircuit process optimized specifically for thin-gauge
materials.
Low Fume Pulse™ Steel » Low Fume Pulse™ simplifies the balancing act between weld-fume control and weld Power Wave® S500, R450, R450
floor productivity. Developed to be a win-win solution, this advanced pulsed welding process all w/Advanced Module
maximizes arc performance while effectively controlling heat-input.
Rapid X™ Steel & Stainless » Rapid X™ is a premium MIG pulse mode designed to deliver higher travels Power Wave® S500, S350, R450, R450 ,R350
speeds and extremely low spatter levels. all w/STT® Module
STT® Steel, Stainless & High Nickel » This precision MIG mode delivers premium and consistent Power Wave® S350, R350 all w/Digital STT®
root pass results on pipe with low reject rates and excellent gap bridging capabilities. STT® Power Wave® S500, R450, R450
can also be used to reduce spatter and control heat input on sheet metal applications. all w/STT® Module
Invertec® STT® II
RapidArc ®
Steel & Stainless » RapidArc is an accelerated MIG pulse mode with a short arc
®
Power Wave® C300,S700, S500, S350, R450,
length compared to pulse and CV-spray for high travel speed applications. R450, R350, i400
HyperFill™ Steel » Patented Twin Wire GMAW process designed to increase the usable deposition rate Power Wave®
of GMAWoperations without the setup difficulty. Process uses two wires but a single power S700, S500, R450
source, single wire feeder, single gun liner and single contact tip.
Pulse-on-Pulse® Aluminum » This arc modulation MIG pulse mode can deliver a TIG (GTAW)-like bead Power Wave® C300,S700, S500, S350, R450,
appearance. R450, R350, i400
Precision Pulse™ Steel & Stainless » This enhanced MIG pulse mode features a tight, focused arc for
fast vertical up welding and outstanding out-of-position puddle control.
Pulse Steel, Stainless, Aluminum & more » Traditional MIG pulse mode uses a pulse for the metal
transfer, which avoids a short and allows for a wide operating range, characterized by low
to high wire feed speed, many different materials and virtually no spatter.
Power Mode® Steel, Stainless & Aluminum » This enhanced MIG mode can deliver excellent arc stability
with reduced spatter at high travels speeds, resulting from an extended short arc range at
higher wire feed speed procedures. It also yields a tight and stable arc in spray transfer.
CV Steel, Stainless & Aluminum » CV is the conventional mode for MIG welding. This general
purpose MIG welding mode uses constant voltage for short arc, globular and spray transfer.

www.lincolnelectric.com/advanced-process-welders | 51
ADVANCED PROCESS WELDERS

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

Invertec® STT® ll Power Wave® S350, con’t.

Base Models (K1525-1, K1526-1, K1526-2) Air-Cooled Magnum® PRO Front Trigger Aluminum
• STT® II Sense Lead Kit, 25 ft. (7.6 m) 15 ft. (4.5 m) One-Pak® Package (K3552-1)
• Power Wave® S350 (K2823-3)
• Power Feed® 25M for Aluminum (K4191-1)
• Inverter and Wire Feeder Cart
Power Wave® C300
• Harris® Aluminum Flow/Regulator (3100546)
Base Model (K2675-2)
• Magnum® PRO AL G225A Push/Pull Air-Cooled Gun
• Drive Roll Kit, 0.035/0.045 in. (0.9/1.2 mm) w/15 ft (4.5 m) Cable
• Input Cord, 10 ft. (3.0 m) Shown:
Power Wave® C300
• Work Lead & Clamp, 10 ft. (3.0 m) Air-Cooled Magnum PRO Front Trigger Aluminum
® Educational Ready-Pak ® Pkg.

25 ft. (7.6 m) One-Pak® Package (K3552-2)

Steel Ready-Pak® Package (K2774-2) • Power Wave® S350 (K2823-3)
• Everything listed above for Base Model • Power Feed® 25M for Aluminum (K4191-1)
• Power Wave® C300 Undercarriage • Inverter and Wire Feeder Cart
• Magnum® PRO Curve™ 300 Gun Package • Harris® Aluminum Flow/Regulator (3100546)
• Harris® Gas Regulator/Flowmeter & 10 ft. (3.0 m) • Magnum® PRO AL G225A Push/Pull Air-Cooled Gun
Hose Kit (3100211) w/25 ft (7.6 m) Cable

Educational Ready-Pak® Package (K2774-4) Air-Cooled Magnum® PRO Pistol Grip Aluminum
• Everything listed above (K2774-2) 25 ft. (7.6 m) One-Pak® Package (K3553-1)
• TIG Torch Twist Mate™ to Stud Adapter Cable • Power Wave® S350 (K2823-3)
with 2 ft. (0.61 m) Gas Hose • Power Feed® 25M for Aluminum (K4191-1)
Shown:
• PTA-17 Pro-Torch™ TIG Torch • Inverter and Wire Feeder Cart Power Wave® S350/Power Feed® 25M
w/Air-Cooled Magnum® PRO Gun
• Twist Mate™ Torch Adapter • Harris® Aluminum Flow/Regulator (3100546) Aluminum One-Pak® Pkg.
• Parts Kits for PTA-17 Series Torches • Magnum® PRO AL Pistol Grip Push/Pull Air-Cooled
• Foot Amptrol™ Gun w/25 ft (7.6 m) Cable
• Stick Electrode Holder and Cable
Water-Cooled Magnum® PRO Pistol Grip Aluminum
25 ft. (7.6 m) One-Pak® Package (K3554-1)
• Power Wave® S350 (K2823-3)
Power Wave® S350
• Power Feed® 25M for Aluminum (K4191-1)
Base Model (K2823-3)
• Inverter and Wire Feeder Cart
• Input Power Cord, 10 ft. (3.0 m)
• Harris® Aluminum Flow/Regulator (3100546)
• Magnum® PRO AL Pistol Grip Push/Pull
Steel Ready-Pak® Package (K3005-3) Water-Cooled Gun w/25 ft (7.6 m) Cable
• Power Wave® S350 (K2823-3) • CoolArc® 55 Aluminum Water Cooler
• Power Feed® 84 Bench Model (K3328-13)
• 0.035 in. (0.9 mm) and 0.040-0.045 in. (1.0-1.1 mm)
Drive Roll & Wire Guide Kits
• Magnum® PRO Curve™ 400 Gun Pkg., 15 ft. (4.5 m)
• Work & Wire Feeder Power Cables Pkg.
• Inverter and Wire Feeder Cart
• Harris® Gas Regulator/Flowmeter & 10 ft. (3.0 m)
Hose Kit (3100211)

(1)
Power Wave S350 Aluminum Air-Cooled Ready-Pak and One-Paks include the following accessories:
Drive Roll Kits; Diffusors; Nozzles; Tips; Liners; Work Lead Package. (K4184-5 Advanced Module One-Pak also includes: Foot Pedal, TIG Torch and TIG Kit).
Power Wave S350 Aluminum Water-Cooled One-Paks include the following accessories: Drive Roll Kits, Coolant, Tips, Liners, Work Lead Package.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

52 | www.lincolnelectric.com/advanced-process-welders
ADVANCED PROCESS WELDERS

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

Power Wave® S500

Power Feed® 84 One-Pak® Package (K3186-2)
• Power Wave® S500 (K2904-1)
• Power Feed® 84 Bench Model (K3328-13)
• 0.040-0.045 (1.0-1.1 mm) Drive Roll & Wire Guide Kit
• Work Lead Package
• Harris® Gas Regulator/Flowmeter
& 10 ft. (3.0 m) Hose Kit (3100211)
• Magnum® PRO Curve 400 Gun Pkg., 15 ft. (4.5 m)

Power Feed® 84 Ready-Pak® Package (K3187-2)

• Everything listed above (K3186-2)
• Inverter & Wire Feeder Cart

Power Wave® STT® Module

Base Model (US/International) (K2902-1)
• Power Source Output Pigtail Adapter Cable
(Tweco®-style)
• Remote Voltage Sense Lead, 25 ft. (3.7 m)

Power Wave® Advanced Module

Base Model (K2912-1)
• Power Source Output Pigtail Adapter Cable
(Tweco®-style)
• 25 ft. (7.6 m) Remote Voltage Sense Lead
• ArcLink ® Output Receptacle
• Differential Input and Output
(Sync Tandem Output)
• Shielding Gas Input

Power Wave® Advanced Module Aluminum

Base Model (K4192-1)
• Power Source Output Pigtail Adapter Cable
(Tweco®-style)
• 25 ft. (7.6 m) Remote Voltage Sense Lead
• ArcLink ® Output Receptacle
• Differential Input and Output
(Sync Tandem Output)
• Shielding Gas Input

(1)
Power Wave S350 Aluminum Air-Cooled Ready-Pak and One-Paks include the following accessories:
Drive Roll Kits, Diffusors, Nozzles, Tips, Liners, Work Lead Package. (K4184-5 Advanced Module One-Pak also includes: Foot Pedal, TIG Torch and TIG Kit).
Power Wave S350 Aluminum Water-Cooled One-Paks include the following accessories: Drive Roll Kits, Coolant, Tips, Liners, Work Lead Package.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/advanced-process-welders | 53
SECTION HEADER
ADVANCED PROCESS WELDERS

Accessories

Power Wave® S500

Power Wave® C300

Power Wave® S700

Power Wave® S350
Invertec STT® ll
Base Model

Base Model

Base Model

Base Model

Base Model
K2904-1
K2675-2
K2629-1

K2823-3

K3297-1
Product Name Product No.
GENERAL
Canvas Cover K2378-1 •

Understorage Cart K2734-2 •

Inverter and Wire Feeder Cart K1764-1 • •

Inverter and Wire Feeder Cart K3059-4 • •

Dual Cylinder Inverter and Wire Feeder Cart K3059-5 • •

12-pin to 6-pin Adapter Cable K2909-1 • • • •

12-pin to 7-pin Adapter Cable K2910-1 •

Cool Arc 40 Water Cooler 115/1/50/60

®
K1813-1 • • • • •

Cool Arc® 55 K3086-1 • • •

Cool Arc 55 S
®
K3086-2 • • •

S-Series User Interface Kit K3001-2 • •

Power Wave® STT® Module K2902-2 • •

115V Auxiliary Power Kit K2829-1 •

DeviceNet™ Kit K2827-1 • •

CE Filter K2444-4 •

Tweco -Style Adapter Plug

®
K2946-1 •

Sense Lead Kit, 25 ft. (7.6 m) K940-25 • • • • •

Sense Lead Kit, 75 ft. (22.9 m) K940-75 • • • • •

Heavy Duty Process Sense Lead, 50 ft. (15.2 m) K1811-50 • • • •

Heavy Duty Process Sense Lead, 100 ft. (30.5 m) K1811-100 • • • •

Work Lead Package K2149-1 • •

Coaxial Weld Power Cable (350A), 25 ft. (7.6 m) K1796-25 • • •

Coaxial Weld Power Cable (350A), 50 ft. (15.2 m) K1796-50 • • •

Coaxial Weld Power Cable (300A), 75 ft. (22.9 m) K1796-75 • • •

Coaxial Weld Power Cable (300A), 100 ft. (30.5 m) K1796-100 • • •

Coaxial Weld Power Cable (#1, Lug to Lug), 100 ft. (30.5 m) K2593-100 • • •

Twist Mate™ Cable Plug for 1/0-2/0, 50-70 mm2 cable K852-70 •

Twist Mate Cable Plug for 2/0-3/0, 70-95 mm cable

™ 2
K852-95 •

Twist Mate™ Receptacle for 1/0-2/0, 50-70 mm2 cable K1759-70 •

Twist Mate Receptacle for 2/0-3/0, 70-95 mm cable

™ 2
K1759-95 •

Twist Mate to Lug Cable Adapter

™
K2176-1 •

• Optional

54 | www.lincolnelectric.com/advanced-process-welders
ADVANCED PROCESS WELDERS

Accessories

Power Wave® S500

Power Wave® C300

Power Wave® S700

Power Wave® S350
Invertec STT® ll
Base Model

Base Model

Base Model

Base Model

Base Model
K2904-1
K2675-2
K2629-1

K2823-3

K3297-1
Product Name Product No.
TIG
TIG Torches (see E12.150 or Guns and Torches Section) – • • • •

Foot Amptrol™ 12-pin K870-2 • • •

Hand Amptrol 12-pin ™

K963-4 • • •

TIG Torch Twist Mate™ to Stud Adapter Cable, 2 ft. (0.61 m) Gas Hose K2505-3 •

Tweco Air-Cooled Adapter

®
K1622-6 •

Tweco -Style Cam Lock Adapter, 26 Series Torches

®
K960-3 •

Tweco®-Style Cam Lock Adapter, 17 Series Torches K960-4 •

WIRE FEEDER
Fast-Mate™ Adapter K489-8 •

Drive Roll Kit, 0.035 in. (0.9 mm) Aluminum KP1695-035A •

Drive Roll Kit, 3/64 in. (1.2 mm) Aluminum KP1695-3/64A •

Power Feed® 25M, Power Feed® 84 — • • •

Power Feed 25M Aluminum, Power Wave Advanced Module Aluminum

® ®
—
LN-25 PRO Dual Power — •

Work and Wire Feeder Weld Cable Package with Tweco -Style Plugs
®
K1803-2 •

AutoDrive 19 Controller
®
K3004-2 • • •

AutoDrive® 19 Tandem Controller K3171-1 • •

AutoDrive S
®
K4303-1 • • •

AutoDrive SA
®
K4129-1 • • •

Power Wave STT Module (US/International)

® ®
K2902-1 • •

Power Wave STT Module (CE)

® ®
K2921-1 • •

Power Wave® Advanced Module K2912-1 • •

Water Cooler Hoses (CGA to CGA) K1859-2 • • • •

Water Connection Kit K590-6 •

• Optional

www.lincolnelectric.com/advanced-process-welders | 55
ADVANCED PROCESS WELDERS

Accessories

Power Wave® S500

Power Wave® C300

Power Wave® S700

Power Wave® S350
Invertec STT® ll
Base Model

Base Model

Base Model

Base Model

Base Model
K2904-2
K2675-2
K2629-1

K2823-3

K3297-1
Product Name Product No.
MIG
Magnum® PRO AL G225A Air-Cooled Push-Pull Guns
12-pin, 15 ft. (4.5 m) K3355-1 • • • •

12-pin, 25 ft. (7.6 m) K3355-2 • • • •

12-pin, 35 ft. (10.6 m) K3355-3 • • • •

12-pin, 50 ft. (15.2 m) K3355-4 • • • •

7-pin, 15 ft. (4.5 m) K3356-1 •

7-pin, 25 ft. (7.6 m) K3356-2 •

7-pin, 35 ft. (10.6 m) K3356-3 •

7-pin, 50 ft. (15.2 m) K3356-4 •

Magnum PRO AL G450W Water-Cooled Push-Pull Guns

®

12-pin, 15 ft. (4.5 m) K3357-1 • • •

12-pin, 25 ft. (7.6 m) K3357-2 • • •

12-pin, 35 ft. (10.6 m) K3357-3 • • •

12-pin, 50 ft. (15.2 m) K3357-4 • • •

7-pin, 15 ft. (4.5 m) K3358-1 •

7-pin, 25 ft. (7.6 m) K3358-2 •

7-pin, 35 ft. (10.6 m) K3358-3 •

7-pin, 50 ft. (15.2 m) K3358-4 •

Magnum® PRO AL Pistol Grip Air-Cooled Push-Pull Guns

12-pin, 15 ft. (4.5 m) K3478-1 • • • •

12-pin, 25 ft. (7.6 m) K3478-2 • • • •

12-pin, 35 ft. (10.7 m) K3478-3 • • • •

Magnum PRO AL Pistol Grip Water-Cooled Push-Pull Guns

®

12-pin, 15 ft. (4.5 m) K3479-1 • • •

12-pin, 25 ft. (7.6 m) K3479-2 • • •

Cougar Air-Cooled Push-Pull Gun, 7-pin, 25 ft. (7.6 m)

™
K2704-2 •

Cougar™ Air-Cooled Push-Pull Gun, 7-pin, 50 ft. (15.2 m) K2704-3 •

SPOOL GUN
Magnum® 250LX™ Spool Gun K2490-1 •

Magnum 250LX Spool Gun Control Cable Extension, 25 ft. (7.6 m)

® ™
K2519-1 •

2-YEAR EXTENDED WARRANTY AVAILABLE — • • • • •

For more information on our Extended Warranty program, visit www.lincolnelectric.com/warranty • Optional

56 | www.lincolnelectric.com/advanced-process-welders
 MULTI-OPERATOR WELDING SYSTEMS
MODEL PROCESS INPUT FEATURES
DC+ Welding Only

Touch-Start TIG®

One Disconnect
Current Range

Flux-Cored

IP23 Rated
Arc Gouge
Polarity

(Amps)

Switch
Pulsed

Phase

Hertz
Mode

Stick

MIG
TIG

RACK SYSTEMS
Invertec® V275-S CC DC 5-275 3 50,60 • • IP23S
Invertec V350 PRO
®
CC/CV DC 5-425 3 50/60 • • •
FLEXTEC 350X
™
CC/CV DC 5-425 3 50/60 • •
FLEXTEC 500
™
CC/CV DC 5-500 3 50/60 • •
FLEXTEC 650X
™
CC/CV DC 40-815 3 50/60 • •
MULTI-ARC SYSTEM
Multi-Weld™ 350 CC/CV DC+ only 30-350 NA NA • •
57 | www.lincolnelectric.com/tig-welders
KEY: Excellent Good Optional
MULTI-OPERATOR WELDING SYSTEMS

Invertec® V275-S Processes

• Stick
Inverter Racks • TIG
• Gouging
Compact, Efficient and Weather-Resistant

• Basic DC stick, DC TIG and gouging capability Output

• Available 4 and 8 pack configurations

• Power sources connect to one easy outgoing Input
power drop with a common disconnect switch
• Individual fuses provide overcurrent protection
for each power source
• Two overhead lift eyes, standard fork Literature
E5.92
lift slots and optional casters provide
easy maneuverability

Product Output Product Input Power(1) Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Connection Number Voltage/Phase/Hertz Voltage/Duty Cycle(2) Rated Output Range in (mm) lb (kg)
Invertec® V275-S Tweco® K2666-1 208/230/460/575/3/60 275A/31V/35% 96/89/46/39A 5-275A 55.69 x 38.5 x 33.5 520
4-Pack Rack (1414 x 978 x 851) (236)
220/380/400/415/440/3/50 250A/30V/35% 89/53/53/50/46A
8-Pack Rack Tweco® K2666-2 208/230/460/575/3/60 275A/31V/35% 161/149/77/65A 55.69 x 58.5 x 33.5 986
(1414 x 1486 x 851) (447)
220/380/400/415/440/3/50 250A/30V/35% 149/89/89/83/77A

(1)
Fused for 380/460/575/3/50/60V AC operation. For 230 or 208V AC operation, primary fuses must be changed.
(2)
Based on a 10 minute period. Output is for each individual machine.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Invertec® V350 PRO Processes

• Stick
Inverter Racks • TIG
• MIG
Multi-Purpose, Multi-Process • Flux-Cored
• Gouging
• Handles DC stick, DC TIG, MIG, flux-cored
and gouging Output
• Available 4 and 6 pack configurations
• Power sources connect to one easy outgoing power
drop with a common disconnect switch Input

• Individual fuses provide overcurrent protection for

each power source
• Two overhead lift eyes, standard fork lift slots and Literature
optional casters provide easy maneuverability E5.92

Product Output Product Input Power(1) Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Connection Number Voltage/Phase/Hertz Voltage/Duty Cycle(2) Rated Output Range in (mm) lb (kg)
Invertec® V350 Tweco® K2667-1 208/230/380-415/460/ 350A/34V/60% 138/128/78/67/57A 5-425A 60 x 44.5 x 33.5 796
PRO 575/3/50/60 (1524 x 1130 x 851) (361)
4-Pack Rack
6-Pack Rack Tweco® K2667-2 185/171/104/90/76A 60 x 59 x 33.5 1039
(1524 x 1499 x 851) (471)
(1)
Fused for 380/460/575/3/50/60V AC operation. For 230 or 208V AC operation, primary fuses must be changed.
(2)
Based on a 10 minute period. Output is for each individual machine.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

58 | www.lincolnelectric.com/racks
MULTI-OPERATOR WELDING SYSTEMS

FLEXTEC® 350X Inverter Racks Processes

• Stick
Simple, Reliable. Flexible. • TIG
• MIG
• Flux-Cored
• Ready for DC stick, DC TIG, MIG and
flux-cored welding
Output
• Available 4 and 6 pack configurations
• Power sources connect to one easy
outgoing power drop with a common
Input
disconnect switch
• Individual fuses provide overcurrent
protection for each power source
• Two overhead lift eyes, standard fork
Literature
lift slots and optional casters provide
E5.92
easy maneuverability

Product Output Product Input Power Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Connection Number Voltage/Phase/Hertz Voltage/Duty Cycle(1) Rated Output Range in (mm) lb (kg)
FLEXTEC® 350X Tweco® K3403-1 380/460/575/3/50/60 350A/34V/60% 74/68/68 (4-Pack) 5-425A 59.72 x 37.5 x 32.88 620
4-Pack Compact 300A/32V/100% 125/113/113 (8-Pack) (1516 x 952 x 835) (281)
Expandable Rack
Standard Model
6-Pack Rack Tweco® K4281-1 100/90/90A 71.22 x 48 x 35.5 650
Standard Model (1809 x 1219 x 902) (294)
4-Pack Compact Tweco® K3402-1 74/68/68 (4-Pack) 59.72 x 37.5 x 32.88 620
Expandable Rack 125/113/113 (8-Pack) (1516 x 952 x 835) (281)
Construction Model
6-Pack Rack Tweco® K4277-1 74/68/68 70.25 x 49.5 x 33 675
Construction Model (1784 x 1257 x 838) (306)

(1)
Based on a 10 minute period. Output is for each individual machine.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

FLEXTEC® 500 Inverter Racks Processes

• Stick
Faster Setup, More Arc Time • TIG
• MIG
• Flux-Cored
• Ready for DC stick, DC TIG, MIG and flux-cored • Gouging
welding and arc gouging
• Available 4 and 6 pack configurations Output
• Power sources connect to one easy outgoing
power drop with a common disconnect switch
• Individual fuses provide overcurrent protection Input
for each power source
• Two overhead lift eyes, standard fork lift
slots and optional casters provide easy
maneuverability
Literature
E5.92

Product Output Product Input Power Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Connection Number Voltage/Phase/Hertz Voltage/Duty Cycle(1) Rated Output Range in (mm) lb (kg)
FLEXTEC® 500 Stud K4098-1 380/460/575/3/50/60 500A/40V/60% 103/75/61A 5-500A 71.22 x 36 x 35.5 800
4-Pack Rack 450A38V/100% (1809 x 914 x 902) (363)
6-Pack Rack Stud K4099-1 138/100/81A 71.22 x 48 x 35.5 1100
(1809 x 1219 x 902) (499)
(1)
Based on a 10 minute period. Output is for each individual machine.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/racks | 59
MULTI-OPERATOR WELDING SYSTEMS

FLEXTEC® 650X Inverter Racks Processes

• Stick
Simple Operation, Advanced Gouging Power • TIG
• MIG
• Flux-Cored
• Handles DC stick, DC TIG, MIG, Flux-Cored • Gouging
and Gouging
• Available 4 pack configuration Output
• Power sources connect to one easy outgoing
power drop with a common disconnect switch
• Individual fuses provide overcurrent protection Input
for each power source
• Two overhead lift eyes, standard fork lift
slots and optional casters provide easy
maneuverability
Literature
E5.92

Product Output Product Input Power Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Connection Number Voltage/Phase/Hertz Voltage/Duty Cycle(1) Rated Output Range in (mm) lb (kg)
FLEXTEC® 650X Stud K3510-1 380/460/575/3/50/60 650A/44V/100% 202/167/105A 10-815A 71.22 x 37 x 35.32 —
4-Pack Rack 750A/44V/60% (1809 x 940 x 897)

(1)
Based on a 10 minute period. Output is for each individual machine.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Multi-Weld™ 350 Processes (DC+ only)

• Stick
More Arcs, Less Hassle • MIG
• Flux-Cored
• Gouging
• Promotes safety by reducing the number of
high-voltage input power connections
Output
• High-efficiency design uses less than half the
power of other grid systems
• Capable of continuous operation at 350 amps
Input

Literature
E5.302

Product Product Input Power(1) Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle(2) Rated Output Range in (mm) lb (kg)
Multi-Weld™ 350 K1735-1 80V DC 350A/34V/100% 165A 15-40V 11.6 x 10 x 21.5 67
(DC+ only output) 30-350A (295 x 254 x 546) (30)
Max. OCV:
78V

(1)
Fused for 380/460/575/3/50/60V AC operation. For 230 or 208V AC operation, primary fuses must be changed.
(2)
Based on a 10 minute period. Output is for each individual machine.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

60 | www.lincolnelectric.com/racks
MULTI-OPERATOR WELDING SYSTEMS

Accessories

Invertec® V350 PRO

Multi-Weld™ 350
Invertec® V275-S

FLEXTEC® 650X
FLEXTEC® 350X

FLEXTEC® 500
Construction

Construction
6-Pack Rack

6-Pack Rack
6-Pack Rack

6-Pack Rack
8-Pack Rack
4-Pack Rack

4-Pack Rack

4-Pack Rack

4-Pack Rack

4-Pack Rack

4-Pack Rack

Base Model
Standard

Standard

K4099-1
K4098-1
K3402-1
K3403-1
K2666-2
K2666-1

K2667-2

K3510-1
K4277-1
K4281-1
K2667-1

K1735-1
Product Name Product No.
GENERAL
Distribution Box K1736-1 •

Twist Mate Cable Plug for 1/0-2/0, 50-70 mm cable

™ 2
K852-70 •

Twist Mate Cable Plug for 2/0-3/0, 70-95 mm cable

™ 2
K852-95 •

Twist Mate™ Receptacle for 1/0-2/0, 50-70 mm2 cable K1759-70 •

Twist Mate Receptacle for 2/0-3/0, 70-95 mm cable

™ 2
K1759-95 •

Tweco Style Cam-Lock Adapter Plug

®
K2946-1 • • • • • • • • • • •

LC-40, Tweco® Style Plug (male, 1/0 Thru 2/0) K3416-70 • • • • • • • •

LC-40, Tweco Style Receptacle (female, 1/0 Thru 2/0)

®
K3417-70 • • • • • • • •

LC-40HD, Tweco® Style Plug (male, 3/0 Thru 4/0) K3416-90 • • • • • • • •

LC-40HD, Tweco Style Receptacle (female, 3/0 Thru 4/0)

®
K3417-90 • • • • • • • •

Remote Output Control, 6-pin, 25 ft. (7.6 m) K857 • • • • •

Remote Output Control, 6-pin, 100 ft. (30 m) (Compatible with FLEXTECS K857-1 • • • • •
with addition of K2909-1, 12-pin to 6-pin adpater cable)
Remote output control, 12-pin, 25 ft. (7.6 m) K852-2 • • • • • • •

Remote output control, 12-pin, 100 ft. (30 m) K857-3 • • • • • • •

Flextec 350X Empty 4-Pack Rack K3400-1 • •

Flextec 350X 4-Pack to 8-Pack Rack Conversion Kit K3410-1 • •

(included with full rack system)
Flextec 350X Locking Foot Kit (included with full rack system) K4424-1 • • • •

Caster Kit K2665-1 • • • • • • • • • • • •

Weld Fume Control System — • • • • • • • • • • • •

POWER SOURCE
Idealarc® DC1000 K1386-3 •

Idealarc DC1500
®
K1275 •

SAE-500 ®
K1278-11 •

Vantage® 500 K2405-2 •

FLEXTEC 650X ®
K3510-1 •

WIRE FEEDER
LN-25® PRO Wire Feeders — • • • • • • • • • • • •

LN-25X Wire Feeders

™
— • • • • • • • • • • • •

Activ8X™ Wire Feeders • • • • • • • • • • • •

Tweco® is a registered trademark of Victor Technologies International, Inc.

For more information on our Extended Warranty program, visit www.lincolnelectric.com/warranty • Optional

62 | www.lincolnelectric.com/racks
 ENGINE DRIVES: COMMERCIAL
MODEL OUTPUT PROCESS FEATURES
Reactor Technology

Downhill Pipe Mode

Electric Fuel Gauge

Arc Force Control

Touch Start TIG®

Remote Capable
Power (1) (watts)
Current Range

Digital Meters
Enclosed Case
AC Generator

Scratch Start

Technology®
Tube Frame
Flux-Cored
Arc Gouge

Hot Start
Polarity

Chopper
in (mm)
(Amps)

DC TIG

AC TIG
Mode

Stick
Pipe

MIG

GASOLINE

Bulldog® 5500 CC AC 70-140 AC 5,500 S

4,000 C
• •
Outback® 145 CC DC 50-145 DC 4,750 P
4,250 C
• •
Outback® 185 CC DC 50-185 DC 5,700 P
5,200 C
• •
Ranger® 225 CC/
CV DC 50-225 DC 10,500 P
9,000 C 5/32
(4.0)
• •
Ranger® 250 GXT CC/
CV
AC/
DC
50-250 DC
50-250 AC
11,000 P
10,000 C 3/16
(4.8)
• • • •
Ranger® 305G and CC/
CV DC
20-305 DC
40-300 DC Pipe
10,500 P
3/16 • • • • • • • •
Ranger® 305 EFI 20-250 DC TIG 9,500 C (4.8)

LIQUID PROPANE GAS

Ranger® 305 LPG CC/

CV DC
20-300 DC
40-300 DC Pipe
10,000 P
9,000 C 3/16 • • • • • • •
20-250 DC TIG (4.8)

DIESEL

Ranger® 305 D CC/

CV DC
20-305 DC
40-300 DC Pipe
10,000 P
9,500 C 3/16 • • • • • • • •
20-250 DC TIG (4.8)

63 | www.lincolnelectric.com/tig-welders
KEY: Excellent Good Optional (1)
C = Continuous P = Peak S = Surge
ENGINE DRIVES: COMMERCIAL

Bulldog® 5500 Processes

• Stick
The Stick Welder’s Best Friend –
Engine-Driven Welder Output

• AC welding with up to 1/8 in. (3.2 mm)

stick electrode
Input
• Low-Lift™ grab bars provide leverage for
lifting on and off truck beds
• Rugged tube frame for sturdy protection
• 5,500 watts of surge AC generator power
Literature
E6.32

Product Product Rated Output: Current/ # of HP & Speed HxWxD Net Wt.
Name Number Voltage/Duty Cycle Output Range Engine Cyl. (rpm) in (mm) lb (kg)
Bulldog® 5500 K2708-2 125A AC/20V/30% 70-140A AC Kohler® CH395 1 9.5 @ 3600 25.6 x 21.8 x 31.5 198
100A AC/25V/60% 5,500 W surge (651 x 553 x 800) (90)
4,000 W continuous

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Outback® 145 Processes

• Stick
Built for The Great Outdoors
Output
• DC welding with up to 1/8 in. (3.2 mm)
stick electrode
• Low-Lift™ grab bars provide leverage for Input
lifting on and off truck beds
• Rugged tube frame for sturdy protection
• 4,750 watts of peak AC generator power
Literature
E6.65

Product Product Rated Output: Current/ # of HP & Speed HxWxD Net Wt.
Name Number Voltage/Duty Cycle Output Range Engine Cyl. (rpm) in (mm) lb (kg)
Outback® 145 K2707-2 80A DC/25V/100% 50-145A DC Kohler® CH395 1 9.5 @ 3600 25.6 x 21.8 x 31.5 234
100A DC/25V/60% 4,750 W peak (651 x 553 x 800) (106)
125A DC25V/30% 4,250 W continuous

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

64 | www.lincolnelectric.com/engine-drives
ENGINE DRIVES: COMMERCIAL

Outback® 185 Processes

• Stick
Unleash the Power
Output
• All engine controls on the front panel
• DC welding with up to 5/32 in. (4.0 mm)
stick electrode Input
• Low-Lift™ grab bars provide leverage for lifting
on and off truck beds
• Rugged tube frame for sturdy protection
• 5,700 watts of peak AC generator power Literature
E6.70

Product Product Rated Output: Current/ # of HP & Speed HxWxD Net Wt.
Name Number Voltage/Duty Cycle Output Range Engine Cyl. (rpm) in (mm) lb (kg)
Outback® 185 K2706-2 100A DC/25V/100% 50-185A DC Kohler® CH440 1 14 @ 3600 25.6 x 21.8 x 31.5 295
130A DC/25V/60% 5,700 W peak (651 x 553 x 800) (134)
150A DC25V/20% 5,200 W continuous

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Ranger® 225 Processes

• Stick
Arm Yourself with The Right Welder • TIG
• MIG
For The Job • Flux-Cored
• Gouging
• Totally enclosed case protects the engine
and limits noise
Output
• Up to 225 amps of smooth DC
welding output
• 10,500 watts of peak AC generator power Input
• 12 gallon (45 L) tank for extended run times

Literature
E6.89

Product Product Rated Output: Current/ # of HP & Speed HxWxD Net Wt.
Name Number Voltage/Duty Cycle Output Range Engine Cyl. (rpm) in (mm) lb (kg)
Ranger® 225 K2857-1 225A DC CC/25V/40% 50-225A DC Kohler® OHV 2 23 @ 3600 29.9 x 21.5 x 42.3 514
210A DC CC/25V/100% 15-25V CV Command® CH23S (759 x 546 x 1074) (233)
200A DC CV/20V/100% 10,500 W peak To top of exhaust
9,000 W continuous tube:
36.2 (920)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/engine-drives | 65
ENGINE DRIVES: COMMERCIAL

Ranger® 250 GXT Processes

• Stick
Extra Power, Extra Performance • TIG
• MIG
• Flux-Cored
• AC/DC multi-process welding output • Gouging
• 12 gallon fuel tank for long run times
• Plenty of AC generator power Output
• Choice of painted or stainless steel

Input

Literature
E6.96

Product Product Rated Output: Current/ # of HP & Speed HxWxD Net Wt.
Name Number Voltage/Duty Cycle Output Range Engine Cyl. (rpm) in (mm) lb (kg)
Ranger® 250 GXT K2382-4 250A AC/DC CC/25V/100% 50-250A AC/DC Kohler® OHV 2 23 @ 3600 29.9 x 21.5 x 42.3 602
Base Model 250A DC CV/25V/100% 14-28V CV Command (759 x 546 x 1073) (273)
11,000 W peak CH730
w/ Stainless Steel K2382-5 10,000 W continuous (Electric Fuel To top of exhaust tube:
Roof, Case Sides and Pump) 36.2 (920)
Engine Doors

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Ranger® 305 G Processes

• Stick
An Engine-Driven Welder for All Seasons • TIG
• MIG
• Flux-Cored
• This portable powerhouse is designed for use • Gouging
with gas-powered equipment fleets
• Equipped with digital weld meters to accurately Output
monitor welding output
• 12 gallon (45 L) tank for extended run times
• 10,500 watts of peak AC generator power Input

Literature
E6.117

Product Product Rated Output: Current/ # of HP & Speed HxWxD Net Wt.
Name Number Voltage/Duty Cycle Output Range Engine Cyl. (rpm) in (mm) lb (kg)
Ranger® 305 G K1726-5 305A DC CC/29V/100% 20-305A DC Kohler® OHV 2 23 @ 3600 29.9 x 21.5 x 42.3 510
Base Model 300A DC CV/29V/100% 40-300A Pipe Command® (759 x 546 x 1074) (231)
20-250A DC TIG CH730 Gas To top of exhaust
14-29V CV Electric Fuel Pump tube:
10,500 W peak 36.2 (920)
9,500 W continuous
One-Pak® Pkg. K2353-2 — —

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

66 | www.lincolnelectric.com/engine-drives
ENGINE DRIVES: COMMERCIAL

Ranger® 305 G EFI Processes

• Stick
Fuel-Efficient Engine-Driven • TIG
• MIG
Welder/Generator • Flux-Cored
• Gouging
• Equipped with digital weld meters to accurately
monitor welding output
Output
• 12 gallon (45 L) tank for extended run times
• Electric fuel pump helps avoid vapor lock during
high-altitude operation Input
• Choose the Ranger 305 G EFI (electronic fuel
injection) for easier starts in cold weather and
lower fuel consumption, with no choke
starting required
Literature
• 12,000 watts of peak AC generator power E6.117

Product Product Rated Output: Current/ # of HP & Speed HxWxD Net Wt.
Name Number Voltage/Duty Cycle Output Range Engine Cyl. (rpm) in (mm) lb (kg)
Ranger® 305 G EFI K3928-1 305A DC CC/29V/100% 20-305A DC Kohler® OHV Command® 2 25 @ 3600 29.9 x 21.5 x 42.3 510
Base Model 300A DC CV/29V/100% 40-300A Pipe ECH740 Gas (759 x 546 x 1074) (231)
20-250A DC TIG Electric Fuel Pump
14-29V CV Electric Fuel Injection To top of exhaust
12,000 W peak tube: 36.2 (920)
9,500 W continuous

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Ranger® 305 LPG Processes

• Stick
For Specialized Environments • TIG
• MIG
• Flux-Cored
• Choose the Ranger 305 LPG for those • Gouging
environments where gasoline and diesel
emissions are not acceptable
Output
• Top-of-the-line Kohler® overhead valve
(OHV) 25 HP Command® LPG engine
• Digital weld meters monitor actual Input
welding output
• 10,000 watts of peak AC generator power

Literature
E6.119

Product Product Rated Output: Current/ # of HP & Speed HxWxD Net Wt.
Name Number Voltage/Duty Cycle Output Range Engine Cyl. (rpm) in (mm) lb (kg)
Ranger® 305 LPG K2937-1 300A DC CC/25V/100% 20-300A DC Kohler® OHV 2 25 @ 3600 29.9 x 21.5 x 42.3 480
Base Model 300A DC CV/25V/100% 40-300A Pipe Command® (759 x 546 x 1074) (218)
20-250A DC TIG CH730 LP To top of exhaust
14-29V CV tube:
10,000 W peak 36.2 (920)
9,000 W continuous
One-Pak® Pkg. K3430-1 — —

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/engine-drives | 67
ENGINE DRIVES: COMMERCIAL

Ranger® 305 D Processes

• Stick
Diesel Power, Expanded Capabilities – • TIG
• MIG
Engine-Driven Welder/Generator • Flux-Cored
• Gouging
• Choose the Ranger 305 D for extended
fuel efficiency and compatibility with
Output
diesel-powered fleets.
• Meets all EPA Tier 4 requirements
• Digital weld meters to monitor actual Input
welding output
• Arc force control for a soft or more
forceful digging arc
• 10,000 watts of peak AC generator power Literature
E6.118

Product Product Rated Output: Current/ # of HP & Speed HxWxD Net Wt.
Name Number Voltage/Duty Cycle Output Range Engine Cyl. (rpm) in (mm) lb (kg)
Ranger® 305 D K1727-4 305A DC CC/29V/100% 20-305A DC Kubota® D722 Diesel 3 18.8 @ 29.9 x 21.5 x 50.3 698
Base Model 300A DC CV/29V/100% 40-300A Pipe EPA Tier 4 Final 3600 (759 x 546 x 1327) (317)
20-250A DC TIG To top of exhaust
14-29V tube:
10,000 W peak 35.8 (909)
9,500 W continuous
One-Pak® Pkg. K2352-5 — —

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

68 | www.lincolnelectric.com/engine-drives
ENGINE DRIVES: COMMERCIAL

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

Ranger® 305 G
One-Pak® Package (K2353-2)
• Ranger ® 305 G
• LN-25 Ironworker ® Wire Feeder
• K126™ PRO 350 Amp Innershield® Gun
• Accessory Kit, 400 Amp
• 5/64 in. (2.0 mm) Innershield® NR®-233, Shown:
25 lb. (11.3 kg) Spool Ranger® 305 G
One-Pak®

Ranger® 305 LPG

One-Pak® Package (K3430-1)
• Ranger ® 305 LPG
• Factory Undercarriage
• Welding Gas Cylinder/LPG Tank Holder
• LPG Tank Strap

Shown:
Ranger® 305 LPG
One-Pak®
Ranger® 305 D
One-Pak® Package (K2352-5)
• Ranger ® 305 D
• LN-25 Ironworker ® Wire Feeder
• K126™ PRO 350 Amp Innershield® Gun
• Accessory Kit, 400 Amp
• 5/64 in. (2.0 mm) Innershield® NR®-233,
25 lb. (11.3 kg) Spool

Shown:
Ranger® 305 D
One-Pak®

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/engine-drives | 69
ENGINE DRIVES: COMMERCIAL

Accessories

Rangerr® 305 G EFI

Rangerr® 250 GXT

Rangerr® 305 LPG

Rangerr® 305 D
Rangerr® 305 G
Bulldog® 5500

Outback® 185
Outback® 145

Rangerr® 225
Base Model

Base Model

Base Model

Base Model

Base Model
Base Model

Base Model

Base Model

Base Model

Base Model
(Stainless)
K2706-2
K2708-2

K2382-5
K2382-4
K2707-2

K3928-1
K1726-5
K2857-1

K2937-1

K1727-4
Product Name Product No.
GENERAL
Accessory Kit, 150 Amp K875 • • •

Undercarriage K2722-1 • • •

All-Terrain Undercarriage K1737-1 • • • • •

Factory Undercarriage K1770-1 • • • •

Lift Bail Kit K2819-1 • • •

Canvas Cover K2804-1 • • •

Canvas Cover K886-2 • • • • • •

Power Plug Kit, 20 amp K802N • • • • • • •

Full-KVA Power Plug (1-phase) T12153-9 • • • • • • •

GFCI Receptacle Kit, 120V, 20 Amp (2 required) K1690-1 • • • • • • • •

Spark Arrestor Kit K1898-1 • • • • •

Spark Arrestor Kit K2793-1 •

Welding Gas Cylinder/LPG Tank Holder K1745-1 • • • • • •

LPG Tank Strap (requires K1745-1) K2361-1 •

Small 2-Wheel Road Trailer & Duo-Hitch® Ball/Eye Hitch K2635-1 • • • • • •

Fender and Light Kit K2639-1 • • • • • •

Cable Rack K2640-1 • • • • • •

Polarity/Multi-Process Switch K2642-1 • • • •

Docking Kit K2663-1 • • • •

STICK
Accessory Kit, 400 Amp K704 • • • • • • •

Accessory Kit, 150 Amp K875 • • • • •

Remote Output Control, 25 ft (7.6 m) K857 • • • • • •

Remote Output Control, 100 ft (30.5 m) K857-1 • • • • • •

Remote Output Control with 120V AC, 100 ft (30.5 m), 20 amp capacity K2627-2 • • • • • •

TIG
Pro-Torch™ TIG Torch PTA-26, 25 ft (7.6 m), 2 pc K1783-4 • •

Pro-Torch™ TIG Torch PTA-26V, 25 ft (7.6 m), 2 pc K1783-9 • • • • •

Parts Kit For PTW-18 and PTA-26 Series Torches KP509 • • • • • • •

Control Cable (9-pin to 6-pin and 115V plug) K936-3 • •

Control Cable Extension, 45 ft (13.7 m) K937-45 • •

Hand Amptrol (Rotary Track Style)

™
K963-3 • • • • • •

Foot Amptrol™ K870 • • • • • •

• Optional

70 | www.lincolnelectric.com/engine-drives
ENGINE DRIVES: COMMERCIAL

Accessories

Rangerr® 305 G EFI

Rangerr® 250 GXT

Rangerr® 305 LPG

Rangerr® 305 D
Rangerr® 305 G
Bulldog® 5500

Outback® 185
Outback® 145

Rangerr® 225
Base Model

Base Model

Base Model

Base Model

Base Model
Base Model

Base Model

Base Model

Base Model

Base Model
(Stainless)
K2706-2
K2708-2

K2382-5
K2382-4
K2707-2

K3928-1
K1726-5
K2857-1

K2937-1

K1727-4
Product Name Product No.
TIG, CON’T.
Contactor Kit K938-1 • •

Docking Kit K939-1 • •

Full-KVA Adapter Kit (1-phase) K1816-1 • • • • • • •

TIG Module K930-2 • •

WIRE FEEDER
K126™ PRO FCAW-SS Gun, 15 ft (4.6 m), 0.062-5/64 in (1.6-2.0 mm) K126-12 • • • • • • •

POWER MIG 140C ®

K2471-2 • • •

POWER MIG® 180C K2473-2 • • • • • • • • •

POWER MIG 180D ®

K3018-2 • • • • • • • • •

LN-25X with CrossLinc Technology

™
K4267-1 • • • • • • •

Activ8X™ K3519-1 • • • • • • •

SPOOL GUN
Magnum® SG Spool Gun, Air-Cooled, w/Remote, 25 ft. (7.6 m) K487-25 • • • •

SG Control Module K488 • • • •

Control Module Input Cable, 14-pin MS-type & Lug, 10 ft. (3.0 m) K691-10 • • • •

PLASMA CUTTING
Tomahawk® 375 Air K2806-1 •

Tomahawk® 625 K2807-1 • • • • • •

Tomahawk 1000
®
K2808-1 • • • • • • •

2-YEAR EXTENDED WARRANTY AVAILABLE — • • • • • • • • • •

For more information on our Extended Warranty program, visit www.lincolnelectric.com/warranty • Optional

www.lincolnelectric.com/engine-drives | 71
 ENGINE DRIVES: INDUSTRIAL
MODEL OUTPUT PROCESS FEATURES

Stainless Steel Case

Pure DC Generator

Voltage Reduction
Touch Start TIG®

Air Compressor
Device™ (VRD™)
Current Range

Power (watts)

Hydraulic Pump
Environments
AC Generator

Scratch Start

Weld Meters
Technology®
C = Continuous

Flux-Cored
Arc Gouge

Corrosive
Polarity

Chopper
in (mm)
(Amps)

DC TIG

AC TIG
P = Peak
Mode

Stick
Pipe

MIG

Classic® 300 HE CC DC 40-350 DC 1-Phase: 3,000 C 3/16

(4.8)
•
SAE-300® HE CC DC 40-350 DC 1-Phase: 3,000 C 1/4
(6.3)
•
optional
CC/
Classic® 300 MP CV DC 40-350 DC 1-Phase: 3,000 C 1/4
(6.3)
• •
optional
CC/
SAE-300® MP CV DC 40-350 DC 1-Phase: 3,000 C 1/4
(6.3)
• •
optional optional
Cross Country® CC/ 40-300 DC Pipe 3-Phase: 11,000 C
300 CV DC 20-250 DC TIG 1-Phase: 10,000 C 1/4
(6.3)
• • • •
30-400 CC/CV 3-Phase: 11,000 C
CC/
Vantage® 322 CV DC 40-300 DC Pipe
20-250 DC TIG
1-Phase: 10,000 C 1/4
(6.3)
• • • •
CC/ 30-520 CC/CV 3-Phase: 17,000 C
Vantage® 435 CV DC 20-250 TIG 1-Phase: 11,000 C 5/16
(8.0)
• • • •
SAE-500®
Severe Duty CC DC 80-575 DC 1-Phase: 3,000 C 3/8
(9.5)
• • •
CC/ 30-575 CC/CV 3-Phase: 19,000 C
Vantage® 549 CV DC 20-250 TIG 1-Phase: 11,000 C 3/8
(9.5)
• • • •
CC/ 30-600 CC/CV 3-Phase: 20,000 C
Vantage® 566 CV DC 20-350 TIG 1-Phase: 12,000 C 3/8
(9.5)
• • • •
Air Vantage® CC/ 30-600 CC/CV 3-Phase: 20,000 C
566 CV DC 20-350 TIG 1-Phase: 12,000 C 3/8
(9.5)
• • • • •
Air Vantage® CC/ 30-600 CC/CV 3-Phase: 20,000 C
566 Hydraulic CV DC 20-350 TIG 1-Phase: 12,000 C 3/8
(9.5)
• • • • • •
72 | www.lincolnelectric.com/tig-welders
KEY: Excellent Good Optional
ENGINE DRIVES: INDUSTRIAL

Classic® 300 HE Processes

• Stick
Fuel Efficiency in Pipeline and • TIG
• MIG(1)
Construction Welding • Flux-Cored(1)
• Gouging
• All-copper windings enhance arc stability
for a smooth, high-performance arc Output
(1)

• Five current ranges with overlap for stick welding

and other processes where slope control is
desired. Fine tuning within each range
• EPA Tier 4 rating on Kubota® D1503 Input
diesel engine

Literature
E6.156

With Wire Feed Module.

(1)

Rated 300 amps, 35 volts

at 60% duty cycle.

Product Rated Output: Current/ No. of HP & Speed HxWxD Net Wt.
Product Name Number Voltage/Duty Cycle Output Range Engine Cylinders (rpm) in (mm) lb (kg)
Classic® 300 HE K3198-1 250A/30V/100% 40-350A DC Kubota® 3 24.7 @ 1800 37.1 x 24.3 x 62.8 1371
Base Model 300A/32V/60% D1503 (943 x 616 x 1594) (622)
1-Ph/AC Power: Diesel
3,000 watts EPA Tier 4 To top of exhaust
tube: 45.5 (1156)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

SAE-300® HE Processes
• Stick
Dual Control for Pipeline Welding • TIG
• MIG(1)
• Flux-Cored(1)
• Current controls allow for sharper arc on root • Gouging
and hot passes, or softer arc on pipe welding
with low-hydrogen electrode Output
(1)

• All-copper windings enhance arc stability for

a smooth, high-performance arc
• Perkins® engines offer fuel savings compared
to previous models Input

Literature
E6.162

With Wire Feed Module.

(1)

Rated 300 amps, 35 volts

at 60% duty cycle.

Product Rated Output: Current/ No. of HP & Speed HxWxD Net Wt.
Product Name Number Voltage/Duty Cycle Output Range Engine Cylinders (rpm) in (mm) lb (kg)
SAE-300® HE K3202-1 250A/30V/100% 40-350 DC Perkins® 3 24.7 @ 1800 37.1 x 24.3 x 62.8 1419
Base Model (Perkins®) 300A/32V/60% 403F-15T (943 x 616 x 1594) (644)
1-Ph/AC Power: Turbo-Charged
3,000 watts Diesel To top of exhaust
EPA Tier 4 tube: 45.5 (1156)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/engine-drives | 73
ENGINE DRIVES: INDUSTRIAL

Processes
Classic® 300 MP • Stick
Excellent for Pipelines, Construction • TIG
• MIG
and Maintenance. • Flux-Cored
• Gouging
• Pure DC generator design enables precise control
Output
• Temperature stabilization
• Choose the Classic® 300 MP for traditional five step
current control
• Custom ARC® current adjustment allows for
Input
fine tuning of heat input at the arc (Perkins®
model only)
• Multi-process ready for stick, wire and TIG welding
Literature
• Comes standard with an engine block heater E6.157

Product Rated Output: Current/ No. of HP & Speed HxWxD Net Wt.
Product Name Number Voltage/Duty Cycle Output Range Engine Cylinders (rpm) in (mm) lb (kg)
Classic 300 MP K4263-1 NEMA Ratings: 40-350A DC Perkins® 3 24.7 @ 1800 37.1 x 24.3 x 62.8 1,364
Base Model 250A/30V/100% 403F-15T (943 x 616 x 1594) (619)
(Perkins®) 300A/32V/60% 220 - Max Diesel
160 - 240 EPA Tier 4
120 - 190
Base Model K4264-1 80 - 130 Kubota® 1,377
(Kubota®) Min - 90 D1503 (625)
Diesel
1-Ph/AC Power: EPA Tier 4
3,000 watts

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Processes
SAE-300® MP • Stick
• TIG
Quality. Efficiency. Endurance. • MIG
• Flux-Cored
• Temperature stabilization • Gouging
• Pure DC generator ensures smooth, stable arc Output
• Dual continuous current control allows coarse
tuning, fine tuning and everything in between
• Multi-process ready for stick, wire and TIG welding
• Comes standard with an engine block heater Input

Literature
E6.163

Product Rated Output: Current/ No. of HP & Speed HxWxD Net Wt.
Product Name Number Voltage/Duty Cycle Output Range Engine Cylinders (rpm) in (mm) lb (kg)
SAE-300® MP K4089-1 250A/30V/100% 40-350A Perkins® 3 24.7 @ 1800 37.1 x 24.3 x 62.8 1,419
Base Model/Gray Painted Steel 300A/32V/60% 403F-15T (943 x 616 x 1594) (644)
Case (Perkins®) 1-Ph/AC Power: Diesel
3,000 watts EPA Tier 4
Stainless Steel Case (Perkins®) K4089-2
w/Factory-Installed
Wireless Remote
SAE-300® MP K4090-1 Kubota® 1,432
Base Model/Gray Painted Steel D1503 (649)
Case (Kubota®) Diesel
EPA Tier 4
Gray Painted Steel Case (Kubota®) K4090-2
w/Factory-Installed
Wireless Remote

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

74 | www.lincolnelectric.com/engine-drives
ENGINE DRIVES: INDUSTRIAL

Cross Country® 300 Processes

• Stick
Purpose-Built For Pipe Welding • TIG
• MIG
• Flux-Cored
• Compact and portable: lighter weight and • Gouging
smaller footprint for easy transport
• Dual controls are designed for pipeline welding Output
• Supports DC, stick, wire and TIG processes
• Powerful generator for grinders, pumps and
travel trailers Input

• Comes standard with an Engine Block Heater

Literature
E6.170
Product Rated Output: Current/ No. of HP & Speed HxWxD Net Wt.
Product Name Number Voltage/Duty Cycle Output Range Engine Cylinders (rpm) in (mm) lb (kg)
Cross Country® 300 K4166-1 300A/32V/100% 40-300A CC/CV Kubota® V1505 4 22 @ 1800 31.9 x 25.3 x 56 1034
Base Model/Gray Painted 350A/28V/100% 20-250A TIG Diesel, EPA Tier 4 (810 x 643 x 1422) (469)
Steel Case Final Compliant
3-Ph/AC Power:
Gray Painted Steel Case K4166-2 11,000 watts
w/Factory-Installed
Wireless Remote 1-Ph/AC Power:
Stainless Steel Case K4166-3 10,000 watts
w/Factory-Installed
Wireless Remote
Gray Painted Steel Case K4166-7
w/K4268-1 Wired Remote
One-Pak® Pkg.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Processes
Vantage® 322 • Stick
• TIG
Compact. Multi-Process. Excellent Value. • MIG
• Flux-Cored
• Stainless steel panels offer added durability • Gouging
• Select one of five welding process modes
• Plenty of AC Generator power Output

• Tier 4 Final Kubota® diesel engine

Input

Literature
E6.209

Product Rated Output: Current/ No. of HP & Speed HxWxD Net Wt.
Product Name Number Voltage/Duty Cycle Output Range Engine Cylinders (rpm) in (mm) lb (kg)
Vantage® 322 K2409-5 300A/32V/100% 30-400A CC/CV Kubota® 4 22 @ 1800 35.9 x 25.3 x 60 1,035
Base Model 400A/23V/100% 40-300A Pipe V1505 Diesel (913 x 642 x 1524) (469)
20-250A DC TIG EPA Tier 4
Ready-Pak® Pkg. 1 K2452-5-RP1 90-300A Gouge Final Compliant To top of exhaust —
Ready-Pak Pkg. 2
®
K2452-5-RP2 tube: 44.3 (1124)
3-Ph/AC Power:
Ready-Pak® Pkg. 3 K2452-5-RP3 11,000 watts

1-Ph/AC Power:
10,000 watts

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/engine-drives | 75
ENGINE DRIVES: INDUSTRIAL

Vantage® 435 Processes

• Stick
Utility Machine for the Outdoors • TIG
• MIG
• Flux-Cored
• Compact case with stainless steel enclosure • Gouging
• Optimal arc performance
• Plenty of AC generator power Output
• Industrial diesel engine
• Innovative service access
Input

Literature
E6.220

Product Rated Output: Current/ No. of HP & Speed HxWxD Net Wt.
Product Name Number Voltage/Duty Cycle Output Range Engine Cylinders (rpm) in (mm) lb (kg)
Vantage® 435 K4107-2 400A/36V/100% 30-520A CC/CV Deutz® D2.9L4 4 34.8 @ 1800 Machine only: 1382
Base Model 520A/30V/60% 20-250A TIG Diesel 39.1 x 28.4 x 65.1 (626)
EPA Tier 4 (994 x 721 x 1654)
Ready-Pak® Pkg. 1 K4107-2-RP1 3-Ph/AC Power: Final Compliant —
Ready-Pak Pkg. 3
®
K4107-2-RP3 17,000 watts To top of —
exhaust tube:
1-Ph/AC Power: 48.0 (1219)
11,000 watts

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

SAE-500® Severe Duty™ Processes

• Stick
Take Stick to The Extreme • TIG
• Flux-Cored(1)
• Gouging
• Designed to withstand offshore salt spray and
other corrosive environments with all-copper Output
coils, a coated radiator and wire connections (1)

and sealed switches

• Stainless steel and hot-dip galvanized case
and internal sheet metal
Input
• Spark arrestor and engine air intake shutdown
per Mineral Management Services Code
• Remote control included Literature
E6.182

With CV Adapter. Rated at

(1)

400 amps, 35 volts at 60%

duty cycle. (Not available with
upgrades for severe duty
environments.)

Product Rated Output: Current/ No. of HP & Speed HxWxD Net Wt.
Product Name Number Voltage/Duty Cycle Output Range Engine Cylinders (rpm) in (mm) lb (kg)
SAE-500® K3955-1 400A/40V/100% 80-575A DC Deutz® 4 65.7 @ 1800 45.8 x 28 x 83 2111
Severe Duty™ 500A/40V/60% TD2.9L4 (1164 x 711 x 2109) (957.5)
Base Model 1-Ph/AC Power: Diesel
3,000 watts EPA Tier 4 To top of exhaust
Final Compliant tube: 54.3 (1379)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

76 | www.lincolnelectric.com/engine-drives
ENGINE DRIVES: INDUSTRIAL

Vantage® 549 Processes

• Stick
Powerful. Reliable. Compliant. • TIG
• MIG
• Flux-Cored
• Powerful 525 amp machine with 41VDC • Gouging
at 100% duty cycle
• Reliable turbocharged Deutz engine. Output
• Compliant 49.4 HP engine meets
emissions regulations.
• ArcLink® Communications Protocol enabled Input

Literature
E6.213

Product Rated Output: Current/ No. of HP & Speed HxWxD Net Wt.
Product Name Number Voltage/Duty Cycle Output Range Engine Cylinders (rpm) in (mm) lb (kg)
Vantage® 549 K3534-1 525A/41V/100% 30-575A CC/CV Deutz® TD2.9L4 4 49.4 @ 1800 42 x 32.9 x 69 1662
Base Model 575A/38V/60% 20-250A TIG Turbo Charged (1067 x 836 x 1753) (753)
Diesel
Ready-Pak® Pkg. 1 K3534-1-RP1 3-Ph/AC Power: EPA Tier 4 To top of exhaust —
Ready-Pak® Pkg. 3 K3534-1-RP2 19,000 watts Final Compliant tube: 58.8 (1494) —

1-Ph/AC Power:
11,000 watts

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Vantage® 566 Processes

• Stick
A Superior Arc With A Superior Engine • TIG
• MIG
• Flux-Cored
• Upgraded for Tier 4 Final compliance with • Gouging
a cleaner, more reliable engine
• 575-amp, 43-volt 100% duty cycle welding Output
• Arc Gouges with up to 3/8 in. (9.5 mm)
carbon electrodes
• Low maintenance reliable operation Input

Literature
E6.221

Product Rated Output: Current/ No. of HP & Speed HxWxD Net Wt.
Product Name Number Voltage/Duty Cycle Output Range Engine Cylinders (rpm) in (mm) lb (kg)
Vantage® 566 K3239-2 575A/43V/100% 30-600A CC/CV Deutz® TD2.9L4 4 65.7 @ 1800 42 x 32.9 x 69 1662
Base Model 600A/40V/60% 20-350A TIG Turbo Charged (1067 x 836 x 1753) (754)
Diesel
Ready-Pak® Pkg. 1 K3239-2-RP1 3-Ph/AC Power: EPA Tier 4 To top of exhaust —
Ready-Pak Pkg. 3
®
K3239-2-RP3 20,000 watts Final Compliant tube: 58.8 (1493) —

1-Ph/AC Power:
12,000 watts

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/engine-drives | 77
ENGINE DRIVES: INDUSTRIAL

Air Vantage® 566 Processes

• Stick
A Superior Arc With A Superior Engine • TIG
• MIG
• Flux-Cored
• Upgraded for Tier 4 Final compliance with a • Gouging
cleaner, more reliable engine
• Belt-driven compressor with separate gauges Output
to monitor compressor hours and pressure
• 575-amp, 43-volt 100% duty cycle welding
• Arc Gouges with up to 3/8 in. (9.5 mm) Input
carbon electrodes

Literature
E6.221

Product Rated Output: Current/ No. of HP & Speed HxWxD Net Wt.
Product Name Number Voltage/Duty Cycle Output Range Engine Cylinders (rpm) in (mm) lb (kg)
Air Vantage® 566 K3242-2 575A/43V/100% 30-600A CC/CV Deutz® TD2.9L4 4 65.7 @ 1800 42 x 32.9 x 69 1737
Base Model 600A/40V/60% 20-350A TIG Turbo Charged (1067 x 836 x 1753) (788)
Diesel
Ready-Pak® Pkg. 1 K3242-2-RP1 3-Ph/AC Power: EPA Tier 4 To top of exhaust —
Ready-Pak® Pkg. 3 K3242-2-RP3 20,000 watts Final Compliant tube: 58.8 (1493) —

1-Ph/AC Power:
12,000 watts

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Air Vantage® 566 Hydraulic Processes

• Stick
A Superior Arc With A Superior Engine • TIG
• MIG
• Flux-Cored
• Upgraded for Tier 4 Final compliance with a • Gouging
cleaner, more reliable engine
• Belt-driven compressor with separate gauges Output
to monitor compressor hours and pressure
• Built-in hydraulic pump to power cranes, tools,
and other hydraulic equipment Input
• 575-amp, 43-volt 100% duty cycle welding
• Arc Gouges with up to 3/8 in. (9.5 mm)
carbon electrodes
Literature
E6.221

Product Rated Output: Current/ No. of HP & Speed HxWxD Net Wt.
Product Name Number Voltage/Duty Cycle Output Range Engine Cylinders (rpm) in (mm) lb (kg)
Air Vantage® 566 K4343-2 575A/43V/100% 30-600A CC/CV Deutz® TD2.9L4 4 65.7 @ 1800 42 x 32.9 x 69 1800
Hydraulic 600A/40V/60% 20-350A TIG Turbo Charged (1067 x 836 x 1753) (816)
Base Model Diesel
3-Ph/AC Power: EPA Tier 4 To top of exhaust
20,000 watts Final Compliant tube: 58.8 (1493)

1-Ph/AC Power:
12,000 watts

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

78 | www.lincolnelectric.com/engine-drives
STACKING
IRON
S I N C E 1 9 1 1

Lincoln Electric knows the pipeline business because we’ve been a part of it
from the beginning. It’s a heritage that we don’t take lightly. Because you’ve
given us the opportunity to work alongside you all these years, we’ve been
able to produce pipeline welding machines and electrodes engineered to give
you everything you need to get the job done. We back these products with a
dedicated pipe applications team – available when you need them – because
second chances don’t come easy on a pipeline spread.

To find out more about our comprehensive pipeline offering,

visit lincolnelectric.com/napipeline

AR15-38 ©Lincoln Global, Inc. All Rights Reserved.

ENGINE DRIVES: INDUSTRIAL

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

Cross Country® 300 Vantage® 435 Vantage® 566

One-Pak® Package (K4166-7) Ready-Pak® Package 3 (K4107-3) Ready-Pak® Package 3 (K3239-2-RP3)
• Cross Country ® 300 with Gray Painted • Vantage® 435 (K4107-1) • Vantage® 566 (K3239-2)
Steel Case • Medium 2-Wheel Road Trailer & Duo-Hitch® • Large 2-Wheel Road Trailer & Duo-Hitch®
• 125 ft (38.1 m) Wired Remote Control Ball/Eye Hitch Ball/Eye Hitch
with 115V Auxilary Power • Fender and Light Kit • Fender and Light Kit
• Cable Rack • Cable Rack

Vantage® 322 Ready-Pak® Package 1 (K4138-129) Ready-Pak® Package 1 (K3239-2-RP1)

Ready-Pak® Package 2 (K2409-5-RP2) • Includes everything in Package 3 (K4107-3) • Includes everything in Package 3
• Electrode Cable 3/0, two 50 ft. (K3239-2-RP3)
• Vantage® 322 (K2409-5)
(15.2 m) lengths • Electrode Cable 3/0, two 50 ft.
• Medium 2-Wheel Road Trailer & Duo-Hitch®
• Electrode Cable 3/0, 10 ft. (3.0 m) (15.2 m) lengths
Ball/Eye Hitch
• Work Cable 3/0, 50 ft. (15.2 m) • Electrode Cable 3/0, 10 ft. (3.0 m)
• Cable Connectors, qty. 2 • Work Cable 3/0, 50 ft. (15.2 m)
Ready-Pak® Package 3 (K2409-5-RP3)
• 400A Electrode Holder • Cable Connectors, qty. 2
• Includes everything Package 2
(K2409-5-RP2) • 500A Work Clamp • 400A Electrode Holder
• Fender and Light Kit • 500A Work Clamp
• Cable Rack
Vantage® 549
Ready-Pak® Package 1 (K2409-5-RP1) Ready-Pak® Package 3 (K3534-1-RP3) Air Vantage® 566
• Includes everything in Package 3 • Vantage® 549 (K3534-1) Ready-Pak® Package 3 (K3242-2-RP3)
(K2409-5-RP3) • Air Vantage® 566 (K3242-2)
• Large 2-Wheel Road Trailer & Duo-Hitch®
• Electrode Cable 2/0, two 50 ft. Ball/Eye Hitch • Large 2-Wheel Road Trailer & Duo-Hitch®
(15.2 m) lengths Ball/Eye Hitch
• Fender and Light Kit
• Electrode Cable 2/0, 10 ft. (3.0 m) • Fender and Light Kit
• Cable Rack
• Work Cable 2/0, 50 ft. (15.2 m) • Cable Rack
• Cable Connectors, qty. 2 Ready-Pak® Package 1 (K3534-1-RP1)
• 300A Electrode Holder • Includes everything in Package 3 Ready-Pak® Package 1 (K3242-2-RP1)
• 300A Work Clamp (K3534-1-RP3) • Includes everything in Package 3
• Electrode Cable 3/0, two 50 ft. (K3239-2-RP3)
(15.2 m) lengths • Electrode Cable 3/0, two 50 ft.
• Electrode Cable 3/0, 10 ft. (3.0 m) (15.2 m) lengths
• Work Cable 3/0, 50 ft. (15.2 m) • Electrode Cable 3/0, 10 ft. (3.0 m)
• Cable Connectors, qty. 2 • Work Cable 3/0, 50 ft. (15.2 m)
• 400A Electrode Holder • Cable Connectors, qty. 2
• 500A Work Clamp • 400A Electrode Holder
• 500A Work Clamp

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/engine-drives | 81
ENGINE DRIVES: INDUSTRIAL

Accessories

Cross Country® 300

Air Vantage® 566

Air Vantage® 566
Classic® 300 MP
Classic® 300 HE

Severe Duty™

Vantage® 566
Vantage® 549
Vantage® 435
SAE-300® MP

Vantage® 322
SAE-300® HE

Hydraulic
SAE-500®
Base Model
Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model
(Perkins®)

(Perkins®)

(Perkins®)
(Kubota®)

(Kubota®)

(Kubota®) K4090-1
K4264-1

K2409-5

K4343-2
K4263-1

K4089-1

K3534-1
K3955-1

K3239-2
K4107-2

K3242-2
K3202-1

K4166-1
K3198-1

K3201-1
Product Name Product No.
GENERAL
Power Plug Kit K802D • • • • • • • •

Power Plug Kit, 20 amp K802N • • • • • • •

Spark Arrestor Kit K903-1 • • • • • • •

Spark Arrestor Kit K1898-1 • •

Spark Arrestor Kit K3985-1 • • • • •

Medium Two-Wheel Road Trailer & Duo-Hitch® Ball/Eye Hitch K2636-1 • • • • • • • • • •

Large Two-Wheel Trailer & Duo-Hitch Ball/Eye Hitch

®
K2637-2 • • • • •

Four-Wheel Steerable Yard Trailer with K2641-2 • • • • • • • •

Duo-Hitch® Ball/Eye Hitch
Fender and Light Kit K2639-1 • • • • • • • • • • • • • • •

Cable Rack K2640-1 • • • • • • • • • • • • • • •

Stainless Steel Sheet Metal Kit K2423-1 • • • • • • •

Full KVA Power Plug (1-Phase) T12153-9 • • • • • • •

Full KVA Power Plug (3-Phase) T12153-10 • • • • • • •

Full-KVA Adapter Kit (1-Phase) K1816-1 • • • • • • •

VRD (Voltage Reduction Device) Kit K4212-1 •

Polarity/Multi-Process Switch K2642-1 •

Docking Kit K2663-1 •

Cold Weather Kit K4213-1 •

GFCI Receptacle Kit, 120V, 20 Amp K1690-1 •

Air Filter Kit K3088-1 • •

Deluxe Adjustable Gas Regulator & Hose Kit K586-1 • • • • •

ArcLink “T” Connector Kit

™
K2429-1 • • • • •

Multi-Weld 350 (For DC+ Welding Only)

™
K1735-1 •

• Optional

82 | www.lincolnelectric.com/engine-drives
ENGINE DRIVES: INDUSTRIAL

Accessories

Cross Country® 300

Air Vantage® 566

Air Vantage® 566
Classic® 300 MP
Classic® 300 HE

Severe Duty™

Vantage® 566
Vantage® 549
Vantage® 435
SAE-300® MP

Vantage® 322
SAE-300® HE

Hydraulic
SAE-500®
Base Model
Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model
(Perkins®)

(Perkins®)

(Perkins®)
(Kubota®)

(Kubota®)

(Kubota®) K4090-1
K4264-1

K2409-5

K4343-2
K4263-1

K4089-1

K3534-1
K3955-1

K3239-2
K4107-2

K3242-2
K3202-1

K4166-1
K3198-1

K3201-1
Product Name Product No.
STICK
Accessory Kit, 400 Amp K704 • • • • • • • • • •

Remote Output Control, 25 ft (7.6 m), 6-pin connector K857 • • • • • • • • • • •

Remote Output Control, 100 ft (30 m), 6-pin connector K857-1 • • • • • • • • • • •

Remote Output Control Detachable Box, 125 ft (38.1 m) K4330-1 • • • • • • • • • • •

Remote Control Kit, 100 ft (30.5 m) K924-4 • • • •

125 ft (38.1 m) Remote Output Control with 120V AC K4268-1 • • • • • • • • • • •

Receptacles/Detachable Box
TIG
Pro-Torch™ TIG Torch PTA-26V, 25 ft (7.6 m), 2 pc K1783-9 • • • • • • • • • • • • • • •

Parts Kit For PTW-18 and PTA-26 Series Torches KP509 • • • • • • • • • • • • • • •

Control Cable (9-pin to 115V plug) K936-4 • • • • • • • •

Control Cable Extension, 45 ft (13.7 m) K937-45 • • • • • • • •

Arc Start Switch

™
K814 • • • • • • • •

Contactor Kit K938-1 • • • • • • • •

Foot Amptrol ™
K870 • • • • • • • • • • •

Hand Amptrol (Rotary Track Style)

™
K963-3 • • • • • • • • • • •

TIG Module K930-2 • • • • • • • •

Square Wave TIG 200

™
K5126-1 • • • • • • •

MULTI-PROCESS
Invertec® V350 PRO Multi-Process Welder K1728-5 • • • • •
(Construction Model)
WIRE FEEDER
Wire Feed Module K3964-1 • • •

Remote Control Kit, 100 ft (30.5 m) K2464-1 • • •

K126 PRO Innershield Gun, .062-3/32, 15 ft (4.6 m)

™ ®
K126-11 •

K126 PRO Innershield Gun, 1/16-5/64, 15 ft (4.6 m)

™ ®
K126-12 • • • • • • • • • • • • • • •

Magnum PRO 350 Ready-Pak , 15 ft (4.6 m),

® ®
K2652- • • • • • • • • • • • • • •
0.035-5/64 in. (0.9-2.0 mm) (Includes K466-10 Connector Kit) 2-10-45

• Included • Optional

www.lincolnelectric.com/engine-drives | 83
ENGINE DRIVES: INDUSTRIAL

Accessories

Cross Country® 300

Air Vantage® 566

Air Vantage® 566
Classic® 300 MP
Classic® 300 HE

Severe Duty™

Vantage® 566
Vantage® 549
Vantage® 435
SAE-300® MP

Vantage® 322
SAE-300® HE

Hydraulic
SAE-500®
Base Model
Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model
(Perkins®)

(Perkins®)

(Perkins®)
(Kubota®)

(Kubota®)

(Kubota®) K4090-1
K4264-1

K2409-5

K4343-2
K4263-1

K4089-1

K3534-1
K3955-1

K3239-2
K4107-2

K3242-2
K3202-1

K4166-1
K3198-1

K3201-1
Product Name Product N0.
WIRE FEEDER, CON’T
CV Adapter (with MS-Type connection, local/remote switch) K385-2 •

Heavy Duty ArcLink Control Cable, 25 ft (7.6 m)

®
K2683-25 • • • • •

Heavy Duty ArcLink Control Cable, 50 ft (15.0 m)

®
K2683-50 • • • • •

Heavy Duty ArcLink Control Cable, 100 ft (30.5 m)

®
K2683-100 • • • • •

Flex Feed 74 HT
®
K3883-5 • • • •

LN-25X™ with CrossLinc® Technology K4267-1 • • • • • • • • • • •

Activ8X with CrossLinc Technology

™ ®
K2999-1 • • • • • • • • • • •

Power Feed 25M Wire Feeder, Aluminum Case

®
K2536-8 • • • • •

Power Feed 25M Wire Feeder, Plastic Case

®
K2536-5 • • • • •

SPOOL GUN
Magnum® SG Spool Gun, Air-Cooled, w/Remote, 25 ft (7.6 m) K487-25 • • • • • • • • • • • • •

SG Control Module K488 • • • • • • • • • • • • •

Control Module Input Cable, K691-10 • • • • • • • • • • • • •

14-pin MS-type & Lug, 10 ft (3.0 m)
POWER MIG® 210 MP K3963-1 • • • • • • •

PLASMA CUTTING
Tomahawk® 1000 K2808-1 • • • • • •

2-YEAR EXTENDED WARRANTY AVAILABLE — • • • • • • • • • • • • • • •

For more information on our Extended Warranty program, visit www.lincolnelectric.com/warranty • Optional

84 | www.lincolnelectric.com/engine-drives
 SEMIAUTOMATIC WIRE FEEDERS
MODEL OUTPUT PROCESS FEATURES
Cored Wire Size

Gouging (CCAG)
Submerged Arc
Range: in (mm)

Range: in (mm)
Solid Wire Size

Digital Display
Speed Range
ipm (m/min)

4-Roll Drive
2-Roll Drive
High Speed

High Speed

High Speed

Pulsed MIG
Low Speed

Low Speed

Low Speed

Flux-Cored
Wire Feed

MIG-STT®
MIG

BENCH AND BOOM MODELS

ANALOG
LF-72 50-800 (1.3-20.3) 0.023-1/16 (0.6-1.6) 0.030-5/64 (0.8-2.0) • •
LF-74 50-800 (2.5-20.3) 0.023-1/16 (0.6-1.6) 0.030-5/64 (0.8-2.0) • •
Flex Feed 74 HT ®
50-700 (1.3-17.8) 0.025-3/32 (0.6-2.4) 0.035-0.120 (0.9-3.0) • • • •
Flex Feed 84 ®
35-700 (0.9-17.8) 0.025-3/32 (0.6-2.4) 0.035-0.120 (0.9-3.0) • • • •
Flex Feed® 84 Dual(1) 35-750 (0.9-19.1) 0.025-3/32 (0.6-2.4) 0.035-0.120 (0.9-3.0) • • • •
ARCLINK ®

Power Feed® 84 50-700 (1.3-17.8) 0.025-1/16 (0.6-1.6) • • • •

Power Feed 84 Dual ® (1)
50-500 (1.3-12.7) 0.025-3/32 (0.6-2.4) 0.035-0.120 (0.9-3.0) • • • •
FIELD MODELS
ANALOG
Activ8® 50-800 (1.3-20.3) 0.023-0.052 (0.6-1.3) 0.035-5/64 (0.9-2.0) • • •
Activ8X w/CrossLinc
™ ®
• • •
Technology
LN-23P 30-170 (0.76-4.3) 0.023-0.052 (0.6-1.3) 0.068-5/64 (1.7-2.0) •
LN-25 PRO Standard
®
50-700 (1.3-17.8) 0.023-1/16 (0.6-1.6) 0.030-5/64 (0.8-2.0) • •
LN-25® PRO Extra Torque 50-400 (1.3-10.1) 0.023-1/16 (0.6-1.6) 0.030-3/32 (0.8-2.4) • •
LN-25 PRO Dual Power
®
50-700 (1.3-17.8) 0.023-1/16 (0.6-1.6) 0.030-5/64 (0.8-2.0) • • •
LN-25X w/CrossLinc
™ ®
• • •
50-700 (1.3-17.8) 0.023-1/16 (0.6-1.6) 0.030-5/64 (0.8-2.0)
Technology
ARCLINK®
50-800 (1.3-20.3) 0.030-5/64 (0.8-2.0)
Power Feed® 25M 30-400 (0.76-10.1) 0.023-1/16 (0.6-1.6) 0.030-3/32 (0.8-2.4) • • •

85 | www.lincolnelectric.com/tig-welders
KEY: Excellent Good Optional (1) Extended wire feed speed and wire size range on dual models.
SEMIAUTOMATIC WIRE FEEDERS

Activ8® Processes
• MIG
Get Tough and Get Moving • Flux-Cored

• Small size and weight makes it easy to fit through Output

ship manways and move around job sites
• Compatible with compact 8 in (203 mm) wire spools
• Tough plastic case molded from impact-resistant Input
flame-retardant material
• Cast aluminum MAXTRAC® Wire Drive
enables quick tool-less drive roll changes
Literature
and smooth, steady wire feeding E8.61

Product Product Input Power Rated Output: Current/ Wire Feed Speed Wire Size Range HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Range : ipm (m/min) in (mm) in (mm) lb (kg)
Activ8® K2999-1 15-110V DC 330A/60% 50-800 GMAW: 11.8 x 7.6 x 19.8 27
Base Model (1.3-20.3) 0.23-0.52 (0.6-1.3) (298 x 193 x 503) (12.2)
One-Pak® Pkg. K3289-1 FCAW: — —
0.035-5/64 (0.9-2.0)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Activ8X™ with CrossLinc® Technology Processes

• MIG
Rugged. Compact. Connected. • Flux-Cored

• Impact resistant, flame retardant case provides Output

rugged durability for tough conditions
• Potted PC Boards for moisture and corrosion
protection Input
• Maxtrac® Wire Drive System – Heavy-duty
cast aluminum wire drive system provides
reliable feeding and durability
• Tachometer feedback ensures accurate Literature
wire feed speed E8.6117
• Lightest construction feeder on the
market today
• Accepts up to 8 in. (203 mm) diameter wire spools
• CrossLinc Technology allows for remote
output control over the welding leads.
No control cable needed!
• True Voltage Technology™ (TVT™) automatically
compensates for voltage drops across long
welding cables
Product Product Input Power Rated Output: Current/ Wire Feed Speed Wire Size Range HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Range : ipm (m/min) in (mm) in (mm) lb (kg)
Activ8X™ w/CrossLinc® K3519-1 15-110V DC 330A/60% 50-800 GMAW: 11.8 x 7.6 x 19.8 27
Technology (1.3-20.3) 0.23-0.52 (0.6-1.3) (298 x 193 x 503) (12.2)
Base Model
FCAW:
w/K126™ PRO K3565-1 0.035-5/64 (0.9-2.0)
One-Pak® Pkg.
w/Magnum® PRO K3564-1
Curve™ 300 One-Pak® Pkg.
CE Model (Dinse) K3519-2

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

86 | www.lincolnelectric.com/wire-feeders
SEMIAUTOMATIC WIRE FEEDERS

LN-23P Processes
• Flux-Cored
Tough. Proven. Reliable.
Output
• Equipped with trigger interlock circuit to reduce
operator fatigue
• Gun-mounted two-position switch allows Input
on-the-fly change to 83% of the preset wire
feed speed
• Completely enclosed wire reel keeps the wire
free of contaminants
Literature
• Ideal for self-shielded flux-cored welding on E8.90
pipelines and other extreme worksites

Product Product Input Power Rated Output: Current/ Wire Feed Speed Wire Size Range HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Range : ipm (m/min) in (mm) in (mm) lb (kg)
LN-23P K316L-1 14-50V DC 350A/60% 30-170 0.068-5/64 20.5 x 9 x 19 27
(90V DC Max. OCV) (0.8-4.3) (1.7-2.0) (520 x 230 x 480) (12.3)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

LN-25® PRO Standard Processes

• MIG
Simplicity and Reliability • Flux-Cored

• Dual range wire feed speed delivers greater Output

precision at low-end wire feed speeds
• Standard CC/CV switch, trigger interlock
and flow meter Input
(1)
• Tough plastic case molded from
impact-resistant flame-retardant material
• Cast aluminum MAXTRAC® Wire Drive enables
Literature
quick tool-less drive roll changes and smooth, E8.101
steady wire feeding
(1)
Across-the-Arc

Product Product Input Power Rated Output: Current/ Wire Feed Speed Wire Size Range HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Range : ipm (m/min) in (mm) in (mm) lb (kg)
LN-25® PRO(1) Standard K2613-5 15-110V DC 450A/60% 50-700 SOLID: 15 x 8.7 x 23.2 37
Base Model (1.3-17.7) 0.023-1/16 (0.6-1.6) (381 x 221 x 589) (16)
w/Magnum® PRO K4101-1 CORED: — —
Curve™ 300 Gun 0.030-5/64 (0.8-2.0)
One-Pak® Pkg.
w/K126™ PRO Gun K4101-2 ALUMINUM:
One-Pak® Pkg. 0.035-1/16 (0.9-1.6)

Includes a Flow Meter

(1)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/wire-feeders | 87
SEMIAUTOMATIC WIRE FEEDERS

LN-25® PRO Extra Torque Processes

• MIG
For Larger Wire Diameters • Flux-Cored

on Thicker Material
Output
• Extra Torque model allows up to 3/32 in.
(2.4 mm) wire diameter welding
• Dual range wire feed speed delivers greater Input
precision at low-end wire feed speeds (1)

• Standard CC/CV switch, trigger interlock

and flow meter
Literature
• Tough plastic case molded from E8.101
impact-resistant flame-retardant material
• Cast aluminum MAXTRAC® Wire Drive enables (1)
Across-the-Arc
quick tool-less drive roll changes and smooth,
steady wire feeding

Product Product Input Power Rated Output: Current/ Wire Feed Speed Wire Size Range HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Range : ipm (m/min) in (mm) in (mm) lb (kg)
LN-25® PRO(1) K2613-7 15-110V DC 450A/60% 30-400 SOLID: 15 x 8.7 x 23.2 37
Extra Torque (0.8-10.1) 0.023-1/16 (0.6-1.6) (381 x 221 x 589) (16)
CORED:
0.030-3/32 (0.8-2.4)
ALUMINUM:
0.035-1/16 (0.9-1.6)

Includes a Flow Meter

(1)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

LN-25® PRO Dual Power Processes

• MIG
Extend Your Process Capabilities • MIG-STT ®
• Pulsed
• Flux-Cored
• Dual Power model features across-the-arc and
control cable power and includes remote control
capability and digital display for amps and wire Output
feed speed
• Dual range wire feed speed delivers greater
precision at low-end wire feed speeds Input
(1) (2)

• Standard CC/CV switch, trigger interlock

and flow meter
• Tough plastic case molded from Literature
impact-resistant flame-retardant material E8.101

• Cast aluminum MAXTRAC® Wire Drive enables (1)

Across-the-Arc
quick tool-less drive roll changes and smooth, (2)
Control Cable
steady wire feeding
Product Product Input Power Rated Output: Current/ Wire Feed Speed Wire Size Range HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Range : ipm (m/min) in (mm) in (mm) lb (kg)
LN-25® PRO(1) K2614-6 15-110V DC 450A/60% 50-700 SOLID: 15 x 8.7 x 23.2 37
Dual Power or 24-42V AC (1.3-17.7) 0.023-1/16 (0.6-1.6) (381 x 221 x 589) (16)
CORED:
0.030-5/64 (0.8-2.0)
ALUMINUM:
0.035-1/16 (0.9-1.6)
Includes a Flow Meter
(1)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

88 | www.lincolnelectric.com/wire-feeders
SEMIAUTOMATIC WIRE FEEDERS

LN-25X™ with CrossLinc® Technology Processes

• MIG
Full Control. Fewer Cables. • Flux-Cored

• Reduce job site clutter and eliminate unnecessary Output

movement of personnel around the site
• Full voltage control at the feeder results in the
correct settings for every weld and allows the Input
operator to accurately compensate for voltage
drop across long cable runs
• Set up faster and eliminate trips to the power
source to make adjustments Literature
E8.107.1
• Fully encapsulated and environmentally
protected electronics (1)
Across-the-Arc

Product Product Input Power Rated Output: Current/ Wire Feed Speed Wire Size Range HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Range : ipm (m/min) in (mm) in (mm) lb (kg)
LN-25X K4267-1 15-110V DC 450A/60% 50-700 SOLID: 15 x 8.7 x 23.2 37
w/CrossLinc® (1.3-17.7) 0.023-1/16 (0.6-1.6) (381 x 221 x 589) (16)
Technology
Base Model CORED:
0.030-5/64 (0.8-2.0)
w/Magnum® PRO K4100-1 — —
Curve™ 300 Gun ALUMINUM:
One-Pak® Pkg. 0.035-1/16 (0.9-1.6)
w/K126™ PRO Gun K4100-2
One-Pak® Pkg.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Power Feed® 25M Processes

• MIG
Advanced Process Control. • Pulsed MIG
• MIG-STT ®
Portable Design. • Flux-Cored
• Stick
• Mode select panel enables easy access to • TIG
the Power Wave® library of waveforms • Gouging

• Internal LED lighting illuminates the wire Output

drive, while internal heating controls
humidity around the welding wire
• Dual procedure and user memory presets Input
allow the operator to set A/B procedures
and easily recall custom welding modes
for common applications
• Cast aluminum MAXTRAC® Wire Drive Literature
E8.271
enables quick tool-less drive roll changes
and smooth, steady wire feeding
Product Product Input Power Rated Output: Current/ Wire Feed Speed Wire Size Range HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Duty Cycle/Gearing Range : imp (m/min) in (mm) in (mm) lb (kg)
Power Feed® 25M K2536-4 40V DC 500A/60% SOLID: SOLID: 14.5 x 8.5 x 23.5 35
Aluminum Case 50-800 (1.3-20.3) 0.023-1/16 (0.6-1.6) (368 x 216 x 597) (15.9)
GEARING:
CORED: CORED:
Standard Speed
50-800 (1.3-20.3) 0.030-5/64 (0.8-2.0)
(factory setting)

Plastic Case K2536-5 500A/60% SOLID: SOLID:

30-400 (0.8-10.2) 0.023-1/16 (0.6-1.6)
GEARING:
CORED: CORED:
Extra Torque
30-400 (0.8-10.2) 0.030-3/32 (0.8-2.4)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/wire-feeders | 89
SEMIAUTOMATIC WIRE FEEDERS

LF-72 Processes
• MIG
Wire Feed Consistency • Flux-Cored

• Two roll industrial shop wire feeder available Output

in multiple configurations for boom or
bench mounting
• Brass-to-brass gun connections for better Input
electrical conductivity that results in
better arc performance
• Calibrated wire feed speed dial ensures
precise and accurate settings
Literature
• Cast aluminum MAXTRAC® Wire Drive E8.11
enables quick tool-less drive roll changes
and smooth, steady wire feeding

Product Product Input Power Rated Output: Current/ Wire Feed Speed Wire Size Range HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Range : ipm (m/min) in (mm) in (mm) lb (kg)
LF-72 K2327-4 24-42V AC 500A/60% 50-800 SOLID: 11.1 x 10.2 x 12.9 24
Base Model 50/60 Hz (1.3-20.3) 0.023-1/16 (0.6-1.6) (282 x 259 x 328) (11)
(w/o gun or cable) 9 Amps
CORED:
Bench Model K2327-5 0.030-5/64 (0.8-2.0) 12.6 x 10.9 x 22.5 52
Standard Duty (320 x 277 x 574) (24)
Bench Model K2327-6 15.3 x 13.0 x 27.7 69
Heavy Duty (389 x 330 x 704) (31)
Bench Model K2327-7 15.3 x 13.0 x 27.7 63
Heavy Duty (389 x 330 x 704) (29)
(w/o gun)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

LF-74 Processes
• MIG
Four Roll Feeding for Longer Runs • Flux-Cored

• Four roll industrial shop wire feeder Output

recommended for larger diameter wires,
longer gun cables or long boom conduits
• Brass-to-brass gun connections for better Input
electrical conductivity that results in
better arc performance
• Calibrated wire feed speed dial ensures
precise and accurate settings
Literature
• Cast aluminum MAXTRAC® Wire Drive E8.11
enables quick tool-less drive roll changes
and smooth, steady wire feeding

Product Product Input Power Rated Output: Current/ Wire Feed Speed Wire Size Range HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Range : ipm (m/min) in (mm) in (mm) lb (kg)
LF-74 K2426-4 24-42V AC 600A/60% 50-800 SOLID: 11.1 x 10.2 x 12.9 27
Base Model 50/60 Hz (1.3-20.3) 0.023-1/16 (0.6-1.6) (282 x 259 x 328) (12)
9 Amps
Bench Model K2426-5 CORED: 15.3 x 13.0 x 27.7 63
Heavy Duty 0.030-5/64 (0.8-2.0) (389 x 330 x 704) (29)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

90 | www.lincolnelectric.com/wire-feeders
SEMIAUTOMATIC WIRE FEEDERS

Flex Feed® 74 HT Processes

• MIG
High-Torque, High Performance • Flux-Cored
• Hand-Held SAW
• Gouging (CAG) - with
• Select models include contactors to electrically gouging option installed
isolate the gouging stud
Output
• 2-step trigger interlock enhances operator comfort
for longer welds
• Feed plate can be located on either right or left side
Input
of the weld drive housing for easy integration into
any work center

Literature
E8.203
Product Product Input Power Rated Output: Current/ Wire Feed Speed Wire Size Range HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Range : ipm (m/min) in (mm) in (mm) lb (kg)
Flex Feed™ 74 HT K3883-5 24-42V AC 600A/60% 20 TOOTH(1) : SOLID: 13.3 x 15.5 x 23.6 47
MIG Package 50/60 Hz (wire drive only) 50-500 0.025-3/32 (0.6-2.4) (338 x 394 x 599) (21)
(1.3-12.7) 0.025-1/16 (0.6-1.6) wire drive only
500A/60%
Advanced MIG K3883-12 (wire drive 30 TOOTH : CORED: 25.2 x 15.5 x 27.9 55
Package (640 x 394 x 709) (25)
w/gouging kit) 50-700 0.035-0.120 (0.9-3.0)
Structural Steel K3883-13 (1.3-19.0) 0.035-5/64 (0.9-2.0) 63
Package 600A/30% (29)
Heavy Fab K3883-14 (gouging stud) 75
Package (34)
(1)
Installed from factory NOTE: Other Bench Configurations available. See Literature.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Flex Feed® 84 Processes

• MIG
An industrial wire feeder for high-productivity, • Flux-Cored
• Hand-Held SAW
heavy fab applications • Gouging (CAG) - with
gouging option installed
• Designed especially for consistent feeding over
long conduit runs and large diameters wires Output

• Power Path™ electrical isolation on models with

stud for gouging operations
Input
• Advanced MaxTrac® cast aluminum wire drive system features
patented tool-less drive roll and split wire guide design
• Configure for single, dual, bench or boom setups as your Literature
workspace changes E8.204.1

Product Product Input Power Rated Output: Current/ Wire Feed Speed Wire Size Range: in (mm) HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Range : ipm (m/min) Solid Cored in (mm) lb (kg)
FlexFeed® 84 K5000-2 24-42V AC Wire Drive: Standard Speed / 0.025-3/32 0.035-0.120 16.5 x 15.5 x 28 56
Single Head 50/60 Hz 600A/60% Installed 20 Pinion Gear(1): (0.6-2.4) (0.9-3.0) (419 x 394 x 711) (25.4)
10 amps 35-500 (0.9-12.7)

Wire Drive with Standard Speed / 0.025-1/16 0.035-5/64

Contactors or 30 Pinion Gear: (0.6-1.6) (0.9-2.0)
Gouging: 500A/60% 50-750 (1.3-19.0)

Gouging Stud: High Speed / 0.025-1/16 0.035-5/64

600A/30% Installed 20 Pinion Gear: (0.6-1.6) (0.9-2.0)
50-750 (1.3-19.0)

Wire Drive High Speed / 0.025-0.045 0.035-1/16

Installed from factory. NOTE: Other Bench and Boom
(1) w/Contactors: Installed 20 Pinion Gear: (0.6-1.1) (0.9-1.6)
configurations available. See literature. 500A/60% 50-1200 (1.3-30.4)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/wire-feeders | 91
SEMIAUTOMATIC WIRE FEEDERS

Flex Feed® 84 Dual Processes

• GMAW
An industrial wire feeder for high-productivity, • FCAW
• SAW
heavy fab applications • Gouging (CAG) - with
gouging option installed
• Designed especially for consistent feeding over
long conduit runs and large diameters wires Output

• Dual models include Power Path™ electrical

isolation on the non-active drive and gun for
added safety Input

• Advanced MaxTrac® cast aluminum wire drive

system features patented tool-less drive roll
and split wire guide design Literature
• Configure for single, dual, bench or boom setups E8.204.1
as your workspace changes

Product Product Input Power Rated Output: Current/ Wire Feed Speed Wire Size Range: in (mm) HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Range : ipm (m/min) Solid Cored in (mm) lb (kg)
Flex Feed® 84 K5002-2 24-42V AC Wire Drive: Standard Speed / 0.025-3/32 0.035-0.120 16.5 x 22.5 x 30.6 101
Dual 50/60 Hz 600A/60% Installed 20 Pinion Gear(1): (0.6-2.4) (0.9-3.0) (419 x 572 x 777) (45.8)
10 amps 35-500 (0.9-12.7)

Wire Drive with Standard Speed / 0.025-1/16 0.035-5/64

Contactors or 30 Pinion Gear: (0.6-1.6) (0.9-2.0)
Gouging: 500A/60% 50-750 (1.3-19.0)

Gouging Stud: High Speed / 0.025-1/16 0.035-5/64

600A/30% Installed 20 Pinion Gear: (0.6-1.6) (0.9-2.0)
50-750 (1.3-19.0)

Wire Drive High Speed / 0.025-0.045 0.035-1/16

w/Contactors: Installed 20 Pinion Gear: (0.6-1.1) (0.9-1.6)
500A/60% 50-1200 (1.3-30.4)

Installed from factory.

(1)

NOTE: Other Bench and Boom configurations available. See literature.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

92 | www.lincolnelectric.com/wire-feeders
SEMIAUTOMATIC WIRE FEEDERS

Power Feed® 84 Processes

• MIG
Advanced Multi-Process Digital Control • Pulsed MIG
• MIG-STT®
• Flux-Cored
• Includes eight user memories for complete WPS • Stick
recall and a USB port to transfer memory data • TIG
• Gouging (CCAG)
• Feed plate (Power Feed® 84) can be located on
either right or left side of the wire drive housing
for easy integration into any work environment Output

• Advanced interface includes Auto-Settings

to simplify process set up
Input
• ArcLink® digital communications protocol enables
fast, advanced communication with any
ArcLink®-enabled welding power source
Literature
E8.268

Product Product Input Power Rated Output: Current/ Wire Feed Speed Wire Size Range HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Range : ipm (m/min) in (mm) in (mm) lb (kg)
Power Feed® 84 K3328-13 40V DC 600A/60% 20 TOOTH(1) : SOLID(2): 25.2 x 15.5 x 27.9 62
Single Bench Model (wire drive only) 50-750 0.025-3/32 (0.6-2.4) (640 x 394 x 709) (28.1)
(1.3-19.0) single wire drive
500A/60% CORED(2): only
(wire drive 30 TOOTH : 0.035-0.120 (0.9-3.0)
w/gouging kit) 50-1200
(1.3-30.4)
600A/30%
(gouging stud)
Installed from factory. (2)Variation in the wire size range is dependent on the configuration of the 20 or 30 tooth pinion gear. NOTE: Other Bench and Boom Configurations available. See Literature.
(1)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Power Feed® 84 Dual Processes

• MIG
Advanced Multi-Process Digital Control • Pulsed MIG
• MIG-STT®
• Flux-Cored
• Includes 16 user memories for complete WPS • Stick
recall and a USB port to transfer memory data • TIG
• Gouging (CCAG)
• Feed plate (Power Feed® 84) can be located on
either right or left side of the wire drive housing
for easy integration into any work environment Output

• Advanced interface includes Auto-Settings

to simplify process set up
Input
• ArcLink® digital communications protocol
enables fast, advanced communication with
any ArcLink®-enabled welding power source
Literature
E8.268

Product Product Input Power Rated Output: Current/ Wire Feed Speed Wire Size Range HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Range : ipm (m/min) in (mm) in (mm) lb (kg)
Power Feed® 84 K3330-5 40V DC 600A/60% 20 TOOTH(1) : SOLID(2): 25.2 x 22.5 x 30.6 119
Dual Bench Model (w/o PowerPath™ 50-750 0.025-3/32 (0.6-2.4) (640 x 572 x 777) (53.9)
contactors) (1.3-19.0) dual wire drive
CORED(2): only
500A/60% 30 TOOTH : 0.035-0.120 (0.9-3.0)
(wire drive 50-1200
w/gouging kit) (1.3-30.4)
Installed from factory. (2)Variation in the wire size range is dependent on the configuration of the 20 or 30 tooth pinion gear. NOTE: Other Bench and Boom Configurations available. See Literature.
(1)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/wire-feeders | 93
More Control. Fewer Cables.
FLEXTEC® 350X and LN-25X™
with CrossLinc® Technology.

©2016 Lincoln Global, Inc. All Rights Reserved.

SEMIAUTOMATIC WIRE FEEDERS

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

Activ8® LN-23P LN-25® PRO Extra Torque

Required Accessories for all models Required Accessories for all models Base Model (K2613-7)
• Weld Power Cable • Magnum® Self-Shielded Gun and Cable • Internal Contactor
• Drive Roll and Wire Guide Kit Assembly • Gas Solenoid
• Adapter Kit (K350) for Terminal Strip • Flow Meter
Connection
Base Model (K2999-1) • Arc Sensing Lead & Clip, 15 ft. (4.5 m)
• Adapter Kit (K350-1) for 14-pin MS-Type
• Internal Contactor Connection • 2 Gun Bushings (K1500-2 Tweco® installed;
• Gas Solenoid K1500-1 Lincoln style loose)
• Arc Sensing Lead & Clip, 15 ft. (4.5 m) Base Model (K316L-1)
• 2 Gun Bushings (K1500-2 Tweco® installed; • Control Cable, 25 ft. (7.6 m)
K1500-1 Lincoln style loose)
• 1/0 Electrode Cable, 25 ft. (7.6 m)
LN-25® PRO Dual Power
Base Model (K2614-6)
• Drive Rolls and Guide Tubes,
One-Pak® Package (K3289-1) 3/32 in. (2.4 mm) • Internal Contactor
• Magnum® PRO Curve™ 300 Ready-Pak ® • Gas Solenoid
• Flow Meter
LN-25® PRO Standard • Arc Sensing Lead & Clip, 15 ft. (4.5 m)
Activ8X ™ with CrossLinc® Technology Base Model (K2613-5) • 2 Gun Bushings (K1500-2 Tweco® installed;
Required Accessories for all models K1500-1 Lincoln style loose)
• Internal Contactor
• Weld Power Cable • Gas Solenoid
• Drive Roll and Wire Guide Kit • Flow Meter
• Arc Sensing Lead & Clip, 15 ft. (4.5 m)
Base Model (K3519-1) • 2 Gun Bushings (K1500-2 Tweco® installed;
• Internal Contactor K1500-1 Lincoln style loose)
• Gas Solenoid
• Arc Sensing Lead & Clip, 15 ft. (4.5 m) Magnum® PRO Curve™ 300 One-Pak® Pkg
• 2 Gun Bushings (K1500-2 Tweco® installed; (K4101-1)
K1500-1 Lincoln style loose) • Everything listed for base model (K2613-5)
• Magnum® PRO Curve™ 300 Welding Gun
One-Pak® Package (K3565-1) Ready-Pak ®, 15 ft. (4.6 m)
• Everything listed for base model (K3519-1) • Drive Roll Kit 0.040-0.045 in. (1.0-1.2 mm)
• K126™ PRO Welding Gun Cored Wire

One-Pak® Package (K3564-1) K126® PRO Curve™ 300 One-Pak® Pkg. (K4101-2)
• Everything listed for base model (K3519-1) • Everything listed for base model (K2613-5)
• Magnum® PRO Curve™ 300 Ready-Pak ® • K126® PRO Innershield® 350 FCAW-SS
Welding Gun,
1/16-5/64 (1.6-2.0 mm), 15 ft. (4.6 m)
• Drive Roll Kit 1/16 in. (1.6 mm) Cored Wire

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/wire-feeders | 95
SEMIAUTOMATIC WIRE FEEDERS

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

LN-25X ™ with CrossLinc® Technology LF-72

Base Model (K4267-1) Required Accessories for all models
• Internal Contactor • Weld Power Cable
• Gas Solenoid
• Arc Sensing Lead & Clip, 15 ft. (4.5 m) Base Model w/o Gun or Cable (K2327-4)
• 2 Gun Bushings (K1500-2 Tweco® installed; • 0.035/0.045 in. (0.9/1.1 mm) Drive Rolls & Cable
K1500-1 Lincoln style loose)
• 5/64 in. (2.0 mm) cored wire drive rolls Bench Model, Standard Duty (K2327-5)
and guide kit
• Magnum® PRO 350 Gun & Cable, 15 ft. (4.6 m)
• 0.035/0.045 in. (0.9/1.1 mm) Solid Wire
Magnum® PRO Curve™ 300 One-Pak® Pkg. (K4100-1) Drive Roll & Guide Kit
• Everything listed for base model (K4267-1) • Standard Duty Wire Reel Stand
• Magnum® PRO Curve™ 300 Welding Gun • 44 lb. (20 kg) Wire Package, Max.
Ready-Pak ®, 15 ft. (4.6 m)
• Drive Roll Kit 0.040-0.045 in. (1.0-1.2 mm) Bench Model, Heavy Duty (No Gun) (K2327-7)
Cored Wire
• Control Cable
• 0.035/0.045 in. (0.9/1.1 mm) Solid Wire
K126® PRO Curve™ 300 One-Pak® Pkg. (K4100-2) Drive Roll & Guide Kit
• Everything listed for base model (K4267-1) • Heavy Duty Wire Reel Stand
• K126® PRO Innershield® 350 FCAW-SS Welding Gun, • 60 lb. (27.2 kg) Wire Package, Max.
1/16-5/64 (1.6-2.0 mm), 15 ft. (4.6 m)
• Drive Roll Kit 1/16 in. (1.6 mm) Cored Wire
Bench Model, Heavy Duty (K2327-6)
• Drive Roll Kit 5/64 in. (2.0 mm) Solid/Cored Wire
• Magnum® PRO 350 Gun & Cable, 15 ft. (4.6 m)
• Control Cable
• 0.035/0.045 in. (0.9/1.1 mm) Solid Wire
Power Feed® 25M Drive Roll & Guide Kit
Base Model, Aluminum Case (K2536-4) • Heavy Duty Wire Reel Stand
• Electrode Pigtail • 60 lb. (27.2 kg) Wire Package, Max.
• Mode Select Panel
• Push-Pull Gun Connector
• Remote Control Connector LF-74
• Gun Receiver Bushing Required Accessories for all models
• Standard & Extra Torque Gearing • Weld Power Cable

Base Model, Plastic Case (K2536-5) Base Model (K2426-4)

• Electrode Pigtail • Control Cable
• Mode Select Panel • 0.035/0.045 in. (0.9/1.1 mm) Solid Wire
• Push-Pull Gun Connector Drive Rolls & Guide Kit
• Remote Control Connector
• Gun Receiver Bushing Bench Model, Heavy Duty (K2426-5)
• Standard & Extra Torque Gearing • Everything listed above
• Heavy Duty Wire Reel Stand
• 60 lb. (27.2 kg) Wire Package, Max

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

96 | www.lincolnelectric.com/wire-feeders
SEMIAUTOMATIC WIRE FEEDERS

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

Flex Feed® 74 HT Flex Feed® 84 Dual

Required Accessories for all models Required Accessories for all models
• Drive Roll Kits • Drive Roll Kits
• Control Cable • Control Cable
• Weld Power Cable • Weld Power Cable

MIG Package Model (K3883-5) Dual Bench Model (K5002-2)

• Basic User Interface • Dual Wire Drive
• Standard Duty Reel Stand • Heavy Duty Wire Reel Stand
• Control Cable • Contactors
• #2-#4 Gun Adapter
Advanced MIG Package Model (K3883-12) • 30-tooth Pinion Gear
• Digital User Interface • Control Cable, 10 ft. (3.0 m)
• Heavy Duty Reel Stand
• Control Cable Power Feed® 84
• Lift Bail Required Accessories for all models
• Drive Roll Kits
Structural Steel Package Model (K3883-13)
• Basic User Interface Single Bench Model (K3328-13)
• Heavy Duty Reel Stand • Single Wire Drive
• Control Cable • Heavy Duty Wire Reel Stand
• Gouge Kit • USB
• Lift Bail • #2-#4 Gun Adapter
• 30-tooth Pinion Gear
Heavy Fab Package Model (K3883-14) • Control Cable, 8 ft. (2.4 m)
• Digital User Interface
• Heavy Duty Reel Stand
Power Feed® 84 Dual
• Control Cable
Required Accessories for all models
• Lift Bale
• Drive Roll Kits

Flex Feed® 84 Dual Bench Model (K3330-5)

Required Accessories for all models • Dual Wire Drive
• Drive Roll Kits • Heavy Duty Wire Reel Stand
• Control Cable • USB
• Weld Power Cable • Contactors
• #2-#4 Gun Adapter
Single Bench Model (K5000-2) • 30-tooth Pinion Gear
• Single Wire Drive • Control Cable, 8 ft. (2.4 m)
• Heavy Duty Wire Reel Stand
• #2-#4 Gun Adapter
• 30-tooth Pinion Gear
• Control Cable, 10 ft. (3.0 m)

Additional configurations and boom packages available. Visit lincolnelectric.com

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/wire-feeders | 97
SEMIAUTOMATIC WIRE FEEDERS

Accessories

LN-25® PRO Dual Power

Activ8X™ w/CrossLinc®

LN-25X™ w/CrossLinc®
LN-25® PRO Standard

Power Feed® 25M

Extra Torque
LN-25® PRO
Technology

Technology
Activ8®

LN-23P

Plastic case
Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model
Base Model

Base Model
Alum. Case
K2536-5
K2999-1

K2536-4
K3519-1

K2614-6
K2613-5

K4267-1
K2613-7
K316L-1
Product Name Product No.
REQUIRED (see charts in Drive and Cable Accessories Section)
Weld Power Cables — • • • • • • • •

Coaxial Weld Power Cables — • •

Drive Roll and Wire Guide Kits — • • • • • • • •

Control Cables and Adapters — •

Push-Pull Guns — • •

ArcLink /Linc-Net Control Cables

® ™
— • •

350A FCAW-SS Gun, 10 ft. (3.0 m), 0.068-5/64 in. (1.7-2.0 mm) K345-10 •

GENERAL
Magnum® PRO Curve™ 300 Welding Gun, .045C, 15 ft. (4.6 m) K2951-2-10-45 • • • • • • • •

K126® PRO Innershield® 350A FCAW-SS Welding Gun, 1/16-5/64C, 15 ft. (4.6 m) K126-12 • • • • • • • •

Gun Receiver Bushings (see Drive and Cable Accessories Section) — • • • • • • • •

Receiver Bushing (Tweco® #2-#4 Style) (see Drive and Cable Accessories Section) — • • • • • • • •

Receiver Bushing (see Drive and Cable Accessories Section) — • • • • • • • •

Dual Schedule Fast-Mate Adapter 10 Series

™
K489-7 • • • • • • • •

Plastic Case K3061-1 • •

Work and Wire Feeder 2/0 Weld Cable, 10 ft. (3.0 m) Package K1803-1 • •

Twist Mate™ Cable Plug, For 2/0-3/0, 70-95 mm2 cable K852-95 • • • • • •

Tweco -Style Adapter Plug

®
K2946-1 • •

Jumper Plug Kit K484 • • • • • •

GC-300 Work Clamp K910-1 • •

GC-500 Work Clamp K910-2 • •

Deluxe Adjustable Gas Regulator & Hose Kit, 4.3 ft. (1.3 m) K586-1 • • • •

Portable Digital Wire Feed Speed Meter K283 • •

Flow Meter Kit K3156-1 • •

LN-23P Adapter Kit, For Terminal Strip Connection K350 •

LN-23P Adapter Kit, For 14-pin Connection K350-1 •

Preflow, Postflow and Burnback Timer Kit K2330-2 • • • •

14 lb. (6.4 kg) Innershield Coil Adapter K435 • • • •

8 in. (203.2 mm) O.D. Spool Adapter K468 • • • •

• Required • Optional

98 | www.lincolnelectric.com/wire-feeders
SEMIAUTOMATIC WIRE FEEDERS

Accessories

LN-25® PRO Dual Power

LN-25X™ w/ CrossLinc®
LN-25® PRO Standard

Power Feed® 25M

Extra Torque

Technology
LN-25® PRO
Activ8X™
Activ8®

LN-23P

Plastic case
Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model
Base Model

Base Model
Alum. Case
K2536-5
K2999-1

K2536-4
K3519-1

K2614-6
K2613-5

K4267-1
K2613-7
K316L-1
Product Name Product No.
GENERAL, CON’T.
Replacement Case Kit - Polycarbonate K2596-2 • • • • • •

Micro Wire Straightener K1733-4 • • • • • •

12-Pin to 6-Pin Adapter Cable K2909-1 • •

12-Pin to 7-Pin Adapter Cable K2910-1 • •

ArcLink “T” Cable Connector

®
K2429-1 • •

Remote Output Control (12-Pin), 25 ft. (7.6 m) K857-2 • •

Water Connection Kit K590-6 • •

Shielding Gas Filter KP3103-1 • •

Push-Pull Gun Adapter Kit K2339-1 • •

Drive Roll Kits (see Drive and Cable Accessories Section) — • • • • • • • • •

TIG
PTA-17 Pro-Torch™ TIG Torch, 12.5 ft. (3.8 m), 2 pc K1782-2 • •

PTA-17 Pro-Torch TIG Torch, 25 ft. (7.6 m), 2pc

™
K1782-4 • •

PTA-26 Pro-Torch™ TIG Torch, 12.5 ft. (3.8 m), 2pc K1783-2 • •

PTA-26 Pro-Torch TIG Torch, 25 ft. (7.6 m), 2pc

™
K1783-4 • •

Foot Amptrol , 12-Pin

®
K870-2 • •

Hand Amptrol®, 12-Pin K963-4 • •

POWER SOURCES
MIG Welders (CV), Multi-Process Welders (CC/CV), Engine Driven Welders — • • • • • • •

Crosslinc Equipped Power Sources

™

FLEXTEC® 350X, FLEXTEC® 650X — • •

ArcLink™ Equipped Power Sources

Power Wave® and FLEXTEC® — • •

2-YEAR EXTENDED WARRANTY AVAILABLE — • • • • • • • • •

• Optional

www.lincolnelectric.com/wire-feeders | 99
SEMIAUTOMATIC WIRE FEEDERS

Accessories

Power Feed® 84 Dual

LF-74 Wire Feeder

Flex Feed® 84 Dual

LF-72 Wire Feeder

Flex Feed® 74 HT

Power Feed® 84
Flex Feed® 84
(HD Gouge Kit w/Gun)
Model

Digital Model

Digital Model
Bench Model

Bench Model

Bench Model

Bench Model

Bench Model

Bench Model

Bench Model
(Standard Duty)

(Standard Duty)

(HD Gouge Kit)

Base Model

Base Model

Base Model

Base Model
(HD, w/o gun)
(Heavy Duty)

(Heavy Duty)

(Heavy Duty)

(Heavy Duty)

(Heavy Duty)
(w/o gun)

K3883-12 Digital

K3328-13
K5000-2
K3883-15
K3883-13

K5002-2
K3883-5
K2426-5

K3330-5
K2426-4
K2327-6
K2327-5
K2327-4

K2327-7
Product Name Product No.
REQUIRED (see charts in Drive and Cable Accessories Section)
Weld Power Cables — • • • • • • • • • • • • • •

Coaxial Weld Power Cables — • •

Drive Roll and Wire Guide Kits — • • • • • • • • • • • • • •

Control Cables and Adapters — • • • • • • • • • • • • • •

GENERAL
Gun Receiver Bushing (see Drive and Cable Accessories Section) — • • • • • • • • • • • • • •

Deluxe Adjustable Gas Regulator & Hose Kit, 4.3 ft. (1.3 m) K586-1 • • • • • • • • • • • • • •

Portable Digital Wire Feed Speed Meter K283 • • • • • • • • • • • • • •

Incoming Bushing for Lincoln® Conduit, K1546-1 • • • • • • • • • • • • • •

0.025-1/16 in. (0.6-1.6 mm) wire
Incoming Bushing for Lincoln® Conduit, K1546-2 • • • • • • • • • • • • • •
1/16-1/8 in. (1.6-3.2 mm) wire
Inlet Bushing, Quick Connect Style K3929-1 • • • • • • • •

Incoming Ball Bearing Bushing for Lincoln® Conduit K1551-2 • •

Adapter for Competitive Power Sources K2335-2 • • • • • • • • • • • •

Postflow and Burnback Timer Kit K2330-1 • • • • • •

14 lb. (6.4 kg) Innershield Coil Adapter K435 • • • •

8 in. (203.2 mm) O.D. Spool Adapter K468 • • • •

Remote Voltage Control Kit K2329-1 • • • • • •

Spindle Kit, 2 Inch (50.8 mm) Hub K162-1 • • • • • •

Harris® Argon/CO2 Flowmeter Regulator & Hose Kit, 10 ft. (3.0 m) 3100211 • • • • • • • • • • • • • •

Adapter Cable, Male 14-pin Control Cable to Terminal Strip K1798 • • • • • •

Gas Flow Sensor K3338-1 • • • •

• Required • Optional

100 | www.lincolnelectric.com/wire-feeders
SEMIAUTOMATIC WIRE FEEDERS

Accessories

Power Feed® 84 Dual

LF-74 Wire Feeder

Flex Feed® 84 Dual

LF-72 Wire Feeder

Flex Feed® 74 HT

Power Feed® 84
Flex Feed® 84
(HD Gouge Kit w/Gun)
Model

Digital Model

Digital Model
Bench Model

Bench Model

Bench Model

Bench Model

Bench Model

Bench Model

Bench Model
(Standard Duty)

(Standard Duty)

(HD Gouge Kit)

Base Model

Base Model

Base Model

Base Model
(HD, w/o gun)
(Heavy Duty)

(Heavy Duty)

(Heavy Duty)

(Heavy Duty)

(Heavy Duty)
(w/o gun)

K3883-12 Digital

K3328-13
K5000-2
K3883-15
K3883-13

K5002-2
K2426-6

K3883-5

K3330-5
K2426-7
K2327-6
K2327-5
K2327-4

K2327-7
Product Name Product No.
GENERAL, CON’T.
42 Volt Transformer Kit K1520-1 • • • • • • • • • • • •

Standard Duty Wire Reel Stand, 44 lbs. (20 kg) spools, max. K2328-1 • • • • • •

Standard Duty Wire Reel Stand, 44 lbs. (20 kg) spools, max. K3342-1 • • • • • • • •

Heavy Duty Wire Reel Stand, 60 lbs. (27.2 kg) spools, max. K1524-3 • • • • • •

Heavy Duty Wire Reel Stand, 44 lbs. (20 kg) spools, max. & up to K3343-1 • • • • • • • •
60 lbs. (27.2 kg) coils. (includes K3341-1 Lift Bail)
Undercarriage K163-1 • • • • • • • • • • •

Cart Bracket (req’d for mounting Flex Feed™ and Power Feed® K4068-1 • • • • • • • •
feeders to K3059-xx inverter cart)
Bench to Boom Conversion Kit (control box, no UI) K5004-2 • •

Spool Cover, 30-40 lbs. (13.6-18.1 kg) spools K1634-4 • • • • • • • • • •

Spool Cover, 50-60 lbs. (22.7-27.2 kg) coils K3340-1 • • • • • • • • • •

Insulated Lift Bail, 60 lbs. (27.2 kg) spools, max. K1555-1 • • •

Lift Bail K3341-1 • • • • • • • •

Light Duty Caster Kit K1556-1 • • •

Swivel Platform K1557-1 • • •

22-30 lb. (10-13.6 kg) Readi-Reel Adapter

®
K363P • • • • • • • • • • • • • •

50-60 lb. (22.7-27.2 kg) Coil Adapter, 2 in. (50.8 mm) spindle K1504-1 • • • • • • • •

Wire Reel and Flux Tank Assembly K305 • • • • • •

Wire Straightener K1733-1 • • • • • • • •

Water Connection Kit K590-6 • • • • • • • •

Shielding Gas Filter KP3103-1 • • • • • • • •

Quick Connect Conduit Inlet Bushing K3929-1 • • • • • • • •

POWER SOURCES
Lincoln power sources with 42V feeder power from — • • • • • • • • • • • •
14-pin connector
Power Wave® models —­ • •

2-YEAR EXTENDED WARRANTY AVAILABLE • • • • • • • • • • • • • •

For more information on our Extended Warranty program, visit www.lincolnelectric.com/warranty • Optional

www.lincolnelectric.com/wire-feeders | 101
SUBMERGED ARC
and AUTOMATIC EQUIPMENT
WIRE FEEDER MODEL OUTPUT PROCESS INPUT FEATURES

Cored Wire Size

Submerged Arc
Range: in (mm)

Range: in (mm)
Solid Wire Size

Digital Display
Power Source

Speed Range
ipm (m/min)

4-Roll Drive
2-Roll Drive
Flux-Cored
Wire Feed
Required

Power
MIG
SEMIAUTOMATIC WIRE FEEDERS
optional
DC600,
Flex Feed™ 74HT FLEXTEC® 650X 50-700 (1.3-17.8)(1) 0.025-3/32 (0.6-2.4) 0.035-.120 (0.9-3.0) 40VAC • •
DC600,
Flex Feed™ 84 FLEXTEC® 650X 50-700 (1.3-17.8)(1) 0.025-3/32 (0.6-2.4) 0.035-.120 (0.9-3.0) 40VAC • •
MECHANIZED WIRE FEEDERS
LT-7 Tractor DC600, DC1000 100-400 (2.5-10.2) 3/32-3/16 (2.4-4.8) 3/32-3/16 (2.4-4.8) 115VAC •
Cruiser and
™
Power Wave ®
40VAC • • •
15-500 (0.4-12.5) 1/16-7/32 (1.6-5.6) —
Tandem Cruiser™ AC/DC 1000® SD
AUTOMATIC WIRE FEEDERS

NA-3 Control and Heads DC600, DC1000, 25-600 (0.6-15.2) 0.035-7/32 (0.9-5.6) 0.045-5/32 (1.1-4.0) 115VAC •
DC1500

NA-4 Control and Heads AC1200 subject to arc 1/16-7/32 (1.6-5.6) — 115VAC •
voltage used

NA-5 Control and Heads DC600, DC1000,

DC1500 25-775 (0.6-19.7) 0.035-7/32 (0.9-5.6) 0.045-5/32 (1.1-4.0) 115VAC • •
MAXsa® 10 Controller Power Wave® • •
10-500 (0.25-12.7) 1/16-7/32 (1.6-5.6) — 40VAC
and MAXsa® 22 Feed Head AC/DC 1000® SD
MAXsa® 19 Controller
and MAXsa® 29 Feed Head
Power Wave®
AC/DC 1000® SD 10-500 (0.25-12.7) 1/16-7/32 (1.6-5.6) — 40VAC • •
WELDER MODEL OUTPUT PROCESS INPUT FEATURES
Waveform Control

(on Power Rectifier)

Communication
ArkLink® Digital

7-yr. Warranty
Submerged Arc
Current Range

Technology®
Flux-Cored

Arc Gouge

Stackable
Polarity

(Amps)

Pulsed

Phase

Hertz
Mode

Stick

MIG
TIG

ANALOG
Idealarc® DC600 CC/CV DC 70-680 3 60 • •
Idealarc DC1000
®
CC/CV DC 150-1300 3 60 • •
Idealarc DC1500
®
CC/CV DC 200-1500 3 60 •
Idealarc® AC1200 CC/CV AC 200-1500 1 60 •
DIGITAL
Power Wave® CC/CV AC/DC 100-1000 3 50/60 • •
AC/DC 1000® SD
FLEXTEC® 650X CV DC 40-815 3 50/60 •
KEY: Excellent Good Optional
SUBMERGED ARC & AUTOMATIC EQUIPMENT

Flex Feed® 74 HT Processes

• MIG
High-Torque, High Performance • Flux-Cored
• Hand-Held SAW
• Gouging (CAG) - with
• Select models include contactors to electrically gouging option installed
isolate the gouging stud • Submerged Arc
• 2-step trigger interlock enhances operator Output
comfort for longer welds
• Feed plate can be located on either right or
left side of the weld drive housing for easy Input
integration into any work center

Literature
E8.203

Product Product Input Power Rated Output: Current/ Wire Feed Speed Wire Size Range HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Range : ipm (m/min) in (mm) in (mm) lb (kg)
Flex Feed™ 74 HT K3883-5 24-42V AC 600A/60% 20 TOOTH(1) : SOLID: 13.3 x 15.5 x 23.6 47
MIG Package 50/60 Hz (wire drive only) 50-500 0.025-3/32 (0.6-2.4) (338 x 394 x 599) (21)
(1.3-12.7) 0.025-1/16 (0.6-1.6) wire drive only
500A/60%
Advanced MIG K3883-12 (wire drive 30 TOOTH : CORED: 25.2 x 15.5 x 27.9 55
Package w/gouging kit) 50-700 0.035-0.120 (0.9-3.0) (640 x 394 x 709) (25)
Structural Steel K3883-13 (1.3-19.0) 0.035-5/64 (0.9-2.0) 63
Package 600A/30% (29)
(gouging stud)
Heavy Fab K3883-14 75
Package (34)
(1)
Installed from factory. NOTE: Other Bench Configurations available. See Literature.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Flex Feed® 84 Processes

• MIG
An industrial wire feeder for high-productivity, • Flux-Cored
• Hand-Held SAW
heavy fab applications • Gouging (CAG) - with
gouging option installed
• Designed especially for consistent feeding over long conduit • Submerged Arc
runs and large diameters wires
Output
• Power Path™ electrical isolation on models with stud for
gouging operations
• Advanced MaxTrac® cast aluminum wire drive system features Input
patented tool-less drive roll and split wire guide design
• Configure for single, dual, bench or boom setups as your
workspace changes Literature
E8.204.1

Product Product Input Power Rated Output: Current/ Wire Feed Speed Wire Size Range: in (mm) HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Range : ipm (m/min) Solid Cored in (mm) lb (kg)
FlexFeed® 84 K5000-2 24-42V AC Wire Drive: Standard Speed / 0.025-3/32 0.035-0.120 16.5 x 15.5 x 28 56
Single Head 50/60 Hz 600A/60% Installed 20 Pinion Gear(1): (0.6-2.4) (0.9-3.0) (419 x 394 x 711) (25.4)
10 amps 35-500 (0.9-12.7)

Wire Drive with Standard Speed / 0.025-1/16 0.035-5/64

Contactors or 30 Pinion Gear: (0.6-1.6) (0.9-2.0)
Gouging: 500A/60% 50-750 (1.3-19.0)

Gouging Stud: High Speed / 0.025-1/16 0.035-5/64

600A/30% Installed 20 Pinion Gear: (0.6-1.6) (0.9-2.0)
50-750 (1.3-19.0)

Wire Drive High Speed / 0.025-0.045 0.035-1/16

Installed from factory. NOTE: Other Bench and Boom
(1)
w/Contactors: Installed 20 Pinion Gear: (0.6-1.1) (0.9-1.6)
configurations available. See literature.
500A/60% 50-1200 (1.3-30.4)
WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov
www.lincolnelectric.com/subarc | 103
SUBMERGED ARC & AUTOMATIC EQUIPMENT

LT-7 Tractor Processes

• Submerged Arc
Track Greater Submerged Arc Productivity
Output
• Calibrated tractor drive travels 6 to 70 ipm
(12.7-127.0 m/min)
• Vertical head lift adjuster for adjusting Input
electrical stick-out from 1/2 to 5 inches
• Control box can be mounted on either left or
right, eliminating the need to return to the
power source for routine procedure changes
Literature
• Welds horizontal fillets, lap and butt joints E9.70
to the left or right side of the tractor frame
for convenience

Product Product Input Power: Rated Output: Wire Feed Speed Wire Size Range HxWxD Net Wt.
Name Number Voltage Current/Duty Cycle Gearing Range: ipm (m/min) in (mm) in (mm) lb (kg)
LT-7 Tractor K227-1 115V AC 600A/100% NA 100-400 SOLID: 27.5 x 33 x 14 120
Base Model 50/60 Hz 1100A/100% (2.5-10.2) 3/32-3/16 (698 x 838 x 356) (54)
(w/water cooling) (2.4-4.8)
Track Model K395-1 130
(59)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Cruiser™ Tractor Processes

• Submerged Arc
Rigid, Configurable and Quick
Output
• For butt and fillet joints on plate welding
common in bridge or barge decking, tank
fabrication or shipbuilding
Input
• Set up with or without a track and three
or four wheel operation
• Strong, rigid and stiff where you need
it most – frame, mast, clamps, wheels
and outriggers Literature
E9.170
• Deposition rates up to 30 lbs ( 13.6 kg)
per hour

Product Product Input Power: Rated Output: Wire Feed Speed Wire Size Range HxWxD Net Wt.
Name Number Voltage Current/Duty Cycle Gearing Range: ipm (m/min) in (mm) in (mm) lb (kg)
Cruiser™ Tractor(1) K3048-2 40V DC 1000A/100% SOLID: 29 x 23 x 36 207
Base Model 142:1 15-200 3/32-7/32 (736 x 584 x 914) (94)
(0.4-5.0) (2.4-5.6)

95:1(2) 15-300 1/16-1/8

(0.4-7.6) (1.6-3.2)

57:1(2) 50-500 1/16-3/32

(1.3-12.7) (1.6-2.4)

(1)
Travel Speed, in/min. (m/min) : 10-100 (0.25-2.5) (2)
Optional Gearing

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

104 | www.lincolnelectric.com/subarc
SUBMERGED ARC & AUTOMATIC EQUIPMENT

Tandem Cruiser™ Tractor Processes

• Submerged Arc
Double the Deposition
Output
• Deposition rates up to 30 lbs ( 13.6 kg)
per hour per arc for greater productivity
on thick materials
Input
• For butt and fillet joints on plate welding
common in bridge or barge decking, tank
fabrication or shipbuilding
• Set up with or without a track and three
or four wheel operation Literature
E9.170
• Strong, rigid and stiff where you need
it most – frame, mast, clamps, wheels
and outriggers

Product Product Input Power: Rated Output: Wire Feed Speed Wire Size Range HxWxD Net Wt.
Name Number Voltage Current/Duty Cycle Gearing Range: ipm (m/min) in (mm) in (mm) lb (kg)
Cruiser™ Tractor(1) K3083-1 40V DC 1000A/100% SOLID: 36.5 x 45.5 x 41.5 300
Tandem Model 142:1 15-200 3/32-7/32 (927 x 1156 x 1054) (136)
(0.4-5.0) (2.4-5.6)

95:1(2) 15-300 1/16-1/8

(0.4-7.6) (1.6-3.2)

57:1(2) 50-500 1/16-3/32

(1.3-12.7) (1.6-2.4)

(1)
Travel Speed, in/min. (m/min) : 10-100 (0.25-2.5) (2)
Optional Gearing

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

NA-3S Controller Processes

• Flux-Cored
DC Submerged Arc Control • Submerged Arc

• Delivers arc sensing or constant wire feed speed Output

control with hot or cold starting for use with
either constant current or constant voltage
DC power sources
Input
• Includes travel and Inch Up/Inch Down controls
to aid set up
• Start and stop the welding cycle with the push
of a button
Literature
E9.10

Product Product Input Power: Rated Output: Wire Feed Speed Wire Size Range HxWxD Net Wt.
Name Number Voltage Current/Duty Cycle Gearing Range: ipm (m/min) in (mm) in (mm) lb (kg)
NA-3S Controller K210-2 NA NA NA 25-650 (0.6-16.5) SOLID: NA NA
0.035-7/32
(0.9-5.6)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/subarc | 105
SUBMERGED ARC & AUTOMATIC EQUIPMENT

NA-4 Controller Processes

• Flux-Cored
Battle Arc Blow with AC Multiple • Submerged Arc

Arc Welding
Output
• Delivers arc sensing control with hot or cold
starting for use with constant current AC power
sources for submerged arc welding, including Input
AC-AC tandem arc and AC-AC-AC triple arc
systems and single electrode submerged arc
when arc blow limits the DC welding current
and travel speeds
• Includes travel and Inch Up/Inch Down controls Literature
to aid set up E9.10

• Start and stop the welding cycle with the push

of a button

Product Product Input Power: Rated Output: Wire Feed Speed Wire Size Range HxWxD Net Wt.
Name Number Voltage Current/Duty Cycle Gearing Range: ipm (m/min) in (mm) in (mm) lb (kg)
NA-4 Controller K388-2 NA NA NA 25-650 (0.6-16.5)(1) SOLID: NA NA
0.035-7/32
(0.9-5.6)

(1)
Subject to arc voltage used

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

NA-3S/NA-4 and Processes

• Flux-Cored
NA-3SF/NA-4F Feed Heads • Submerged Arc

Deposit More. Travel Faster.

Output
• Handles wide range of wire diameters and
produces a wide wire feed speed range
• Proven, rugged construction minimizes Input
downtime and maintenance costs

Literature
E9.10

Product Product Input Power: Rated Output: Wire Feed Speed Wire Size Range HxWxD Net Wt.
Name Number Voltage Current/Duty Cycle Gearing Range: ipm (m/min) in (mm) in (mm) lb (kg)
NA-3S/NA-4 Head K208A NA NA NA 15-290 (0.4-7.4)(1) SOLID: NA NA
3/32-7/32
NA-3SF/NA-4F Head K209A (2.4-5.6)
NA-3S/NA-4 Head K208B 22-425 (0.6-10.8)(1) SOLID:
0.035-3/32
NA-3SF/NA-4F Head K209B (0.9-2.4)

(1)
Subject to arc voltage used

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

106 | www.lincolnelectric.com/subarc
SUBMERGED ARC & AUTOMATIC EQUIPMENT

NA-5 Controller Processes

• Flux-Cored
Precise Mechanized Automation Control • Submerged Arc

• Digital display monitors preset or actual Output

wire feed speed and voltage
• Includes timer controls for burnback,
wire react time and weld cycle stop Input
• Includes travel and Inch Up/Inch Down
controls to aid set up
• Start and stop the welding cycle with
the push of a button Literature
E9.30

Product Product Input Power: Rated Output: Wire Feed Speed Wire Size Range HxWxD Net Wt.
Name Number Voltage Current/Duty Cycle Gearing Range: ipm (m/min) in (mm) in (mm) lb (kg)
NA-5 Controller K356-2 NA NA NA 25-775 (0.6-19.7) SOLID: NA NA
0.035-7/32
(0.9-5.6)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

NA-5S and NA-5SF Feed Head Processes

• Flux-Cored
Superior Mechanized Submerged Arc • Submerged Arc

Wire Feeding
Output
• Choose with or without control box,
wire reel, brake and flux hopper
• Handles wide range of wire diameters Input
and produces a wide wire feed
speed range
• Proven, rugged construction minimizes
downtime and maintenance costs
Literature
E9.30

Product Product Input Power: Rated Output: Wire Feed Speed Wire Size Range HxWxD Net Wt.
Name Number Voltage Current/Duty Cycle Gearing Range: ipm (m/min) in (mm) in (mm) lb (kg)
NA-5S Head K346A NA NA NA 15-290 (0.4-7.4) SOLID: NA NA
3/32-7/32
NA-5SF Head K347A (2.4-5.6)
NA-5S Head K346B 22-425 (0.6-10.8) SOLID:
1/16-3/32
NA-5SF Head K347B (1.6-2.4)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/subarc | 107
SUBMERGED ARC & AUTOMATIC EQUIPMENT

MAXsa® 10 Controller Processes

• Submerged Arc
Severe Duty. Digital Ready.
Output
• Waveform Control Technology® enables
the user to choose from a library of
pre-programmed modes
Input
• Eight procedure memories enable the user to
pre-set and save optimal welding parameters
• Hand-held pendant allows operation from
4-100 ft (1.2-30.5 m) with an ArcLink®
extension cable Literature
E9.181
• IP23 rated for operation in harsh environments
• Easy PLC interfacing to control fixture travel, timers
and other system commands

Product Product Input Power: Rated Output: Wire Feed Speed Wire Size Range HxWxD Net Wt.
Name Number Voltage Current/Duty Cycle Gearing Range: ipm (m/min) in (mm) in (mm) lb (kg)
MAXsa® 10 Controller K2814-4 40V DC NA NA NA NA 15 x 13 x 4 25
(381 x 259 x 102) (11.3)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

MAXsa® 22 Feed Head Processes

• Submerged Arc
Drive Large Diameter
Submerged Arc Wires Output

• Rotational feed head adjustment in two planes

allows flexible, accurate setup for fixturing or
Input
arc locating. Optional horizontal and vertical lift
adjuster enables additional positioning flexibility
• Can be used in single, tandem, Twinarc®
or multiple arc applications
• IP23 rated for harsh environments Literature
E9.181

Product Product Input Power: Rated Output: Wire Feed Speed Wire Size Range HxWxD Net Wt.
Name Number Voltage Current/Duty Cycle Gearing Range: ipm (m/min) in (mm) in (mm) lb (kg)
MAXsa® 22 K2370-2 40V DC 1000A/100% SOLID: 12 x 14 x 10 80
Feed Head 142:1(1) 15-200 (0.4-5.0) 3/32-7/32 (305 x 355 x 254) (36.3)
(includes Flux (2.4-5.6)
Hopper)
95:1 15-300 (0.4-7.6) 1/16-1/8
(1.6-3.2)

57:1 50-500 (1.3-12.7) 1/16-3/32

(1.6-2.4)

(1)
142:1 gear box is standard. Conversion Kit supplied for conversion to 95:1 with Wire Drive (K2370-3, K2312-3, or K2311-1)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

108 | www.lincolnelectric.com/subarc
SUBMERGED ARC & AUTOMATIC EQUIPMENT

MAXsa® 19 Controller Processes

• Submerged Arc
Integrator-Ready Submerged Arc Control
Output
• Specifically designed to relay wire feed
commands to the MAXsa® 29 feed head when
a customer-supplied user interface is used in
Input
integrator-driven applicatons
• I/O connector block for start/stop, forward/
reverse feed and shutdown input interfacing
with external accessories
• Status indicator aids diagnostic system Literature
E9.181
troubleshooting
• IP23 rated to withstand harsh environments

Product Product Input Power: Rated Output: Wire Feed Speed Wire Size Range HxWxD Net Wt.
Name Number Voltage Current/Duty Cycle Gearing Range: ipm (m/min) in (mm) in (mm) lb (kg)
MAXsa® 19 Controller K2626-4 40V DC NA NA NA NA 9 x 10.5 x 3 7
(229 x 267 x 76) (3.2)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

MAXsa® 29 Feed Head Processes

• Submerged Arc
Ready for Integrator and
Robotic Automation Output

• Intended for integrator and robotic submerged

arc applications using the
Input
Power Wave® AC/DC 1000® SD power source.
• Closed loop speed control enables full control
over starting, running and stopping wire
feed speed
• Multi-axis rotational feed head adjustment Literature
E9.181
in one plane allows flexible, accurate setup
for fixturing
• IP23 rated to withstand harsh environments
• For use in single, tandem, Twinarc® or multiple
arc applications

Product Product Input Power: Rated Output: Wire Feed Speed Wire Size Range HxWxD Net Wt.
Name Number Voltage Current/Duty Cycle Gearing Range: ipm (m/min) in (mm) in (mm) lb (kg)
MAXsa® 29 K2312-2 40V DC 1000A/100% SOLID: 13 x 16 x 10 35
Feed Head 142:1(1) 15-200 (0.4-5.0) 3/32-7/32 (330 x 406 x 254) (15.9)
(2.4-5.6)

95:1 15-300 (0.4-7.6) 1/16-1/8

(1.6-3.2)

57:1 50-500 (1.3-12.7) 1/16-3/32

(1.6-2.4)

(1)
142:1 gear box is standard. Conversion Kit supplied for conversion to 95:1 with Wire Drive (K2370-3, K2312-3, or K2311-1)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/subarc | 109
SUBMERGED ARC & AUTOMATIC EQUIPMENT

Idealarc® DC600 Processes

• Stick
Idealarc® with Submerged Arc Capacity • DC TIG
• MIG
• Flux-Cored
• Full range output voltage control provides easy • Submerged Arc
operation and precise control • Gouging
• Voltage Reduction Device™ (VRD®) reduces open
circuit voltage for an additional level of safety Output
(specify VRD® model)
• Circuitry protected against moisture and
corrosive environments Input
• Seven-year warranty on power rectifier

Literature
E5.40

Product Product Input Power Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range in (mm) lb (kg)
Idealarc® DC600(1) K1288-22 230/460/575/3/60 600A/44V/100% 108/54/43.2A CV: 70-850A 30.7 x 22.2 x 38 522
Base Models 680A/44V/60% 13-44V (781 x 565 x 965) (237)
K1288-17 230/460/3/60 108/54A CC: 90-850A
w/Multi-Process K1288-18 24-42V
Switch

(1)
50 Hertz models also available

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

FLEXTEC® 650X Processes

• Stick
Multi-Process Power for • DC TIG
• MIG
Heavy Duty Applications • Flux-Cored
• Arc Gouging
• Supports the CV-Subarc process for both 42V and • Submerged Arc
115V submerged arc feeders
• Compatible with most Lincoln Electric feeders Output
including portable across-the-arc, CrossLinc®,
ArcLink® and common bench or boom models
• Engineered for outdoor use and harsh Input
environments (IP23 rated)
• Substantial gouging capability with up to a
1/2 in. (12.7 mm) carbon
Literature
E5.97

Product Product Input Power Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range in (mm) lb (kg)
FLEXTEC® 650X K3425-1 380/460/575/3/50/60 750/44/60%(1) 61/50/40A 40-815A 21.8 x 16.1 x 29.3 165
Base Model (554 x 409 x 584) (75)
650/44/100% (1)
57/47/38A
w/Flex Feed® 84 One-Pak® Pkg. K3514-1 —
GTAW: 750/34/60% GTAW: 10-815A

GTAW: 650/34/100% SMAW: 15-815A

(1)
Output is limited to 600A/100% and 700A/60% when used with the K3091.1 Multi-Process Switch

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

110 | www.lincolnelectric.com/subarc
SUBMERGED ARC & AUTOMATIC EQUIPMENT

Idealarc® DC1000 Processes

• Flux-Cored
Rugged Constructon. Simple Controls. • Submerged Arc
• Gouging

• Full range output control provides easy operation

and precise arc control Output
• Terminal strip and output studs accommodate
remote connections and cable
Input
• Low profile case allows installation of a
workbench and for stacking up to two
machines to conserve floor space
• Internal components are coated to Literature
protect against moisture and corrosion; E5.50
removable side panels allow easy access
to internal parts
• Seven-year warranty on power rectifier

Product Product Input Power Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range in (mm) lb (kg)
Idealarc® DC1000(1) K1386-3 230/460/3/60 1000A/44V/100% 193/96.5A 16-46V 30.7 x 22.5 x 39 821
Base Models 150-1300A (781 x 572 x 991) (372)
K1386-4 575/3/60 77.2A

(1)
50 Hertz models also available

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Idealarc® DC1500 Processes

• Flux-Cored
Plenty of Power for • Submerged Arc
• Gouging
Mechanized Automation

• Mode switch selects the desired output Output

characteristics for the process being used
• Internal components protected against moisture
and corrosive environments Input

• Terminal strip and output studs allow for remote

connections and cable
• Produces outstanding arc characteristics
on both constant voltage and constant Literature
current processes E5.60

• Seven-year warranty on power rectifier

Product Product Input Power Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range in (mm) lb (kg)
Idealarc® DC1500(1) K1275 460/3/60 1500A/44V/100% 184A 200-1500A 57.2 x 22.3 x 38 1420
Base Model 1500A/60V/100% 20-60V (1453 x 566 x 965) (644)

(1)
50 Hertz models also available

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/subarc | 111
SUBMERGED ARC & AUTOMATIC EQUIPMENT

Idealarc® AC1200 Processes

• Submerged Arc
AC Large Wire Diameter Welding
Output
• Controls adjust output settings while
welding or at idle
• Internal components protected against Input
moisture and corrosive environments
• Includes Scott® connection taps for two AC welding
heads operating in tandem
• Specifically designed for submerged arc welding with
Literature
the NA-4 wire feeder and control on AC-AC tandem E5.70
arc and AC-AC-AC triple arc systems and single
electrode submerged arc when arc blow limits
the DC welding current and travel speeds
• Three output studs with overlapping ranges
• Seven-year warranty on power rectifier

Product Product Input Power Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range in (mm) lb (kg)
Idealarc® AC1200 K3140-2 380/415/440/460(2)/1/50/60 1200A/44V/100% 230/201/190/182A 50/60 HZ: 62.2 x 22 x 38 1636
240-1500A (1580 x 559 x 965) (742)
30-44V

60 HZ:
200-1500A
28-44V

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Power Wave® AC/DC 1000® SD Processes

• DC+ Submerged Arc
Speed. Quality. Efficiency. • DC- Submerged Arc
• Balanced AC
Submerged Arc
• CheckPoint™ – A cloud-based system to view • Variable AC
or analyze your welding data. Track equipment Submerged Arcc
usage, store weld data, configure fault limits
and more
Output
• Eliminate downtime. Easy polarity switching
requires no hardware reconfiguration
• 3-phase voltage input eliminates the imbalance Input
associated with transformer-based AC welding
machines

Literature
E9.181

Product Product Input Power Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range in (mm) lb (kg)
Power Wave® K2803-1 380/400/460/500/ 1000A/44V/100% 82/79/69/62/55A 100-1000A 49.2 x 19.2 x 46.2 800
AC/DC 1000® SD(1) 575/3/50/60 (1250 x 488 x 1174) (363)

(1)
Filter is required to meet CE conducted emission requirements. The K2444-3 must be used with the K2803-2

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

112 | www.lincolnelectric.com/subarc
SUBMERGED ARC & AUTOMATIC EQUIPMENT

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

Flex Feed™ 74 HT LT-7 Tractor

Required Accessories for all models Required Accessories for all models
• Drive Roll Kits • Nozzle Assembly
• Control Cable • Weld Power Cable
• Weld Power Cable
Base Model (K227-1)
MIG Package Model (K3883-5) • Control Cable, 25 ft. (7.6 m)
• Basic User Interface
• Standard Duty Reel Stand
• Control Cable Cruiser™ and Tandem Cruiser™ Tractor
Required Accessories for all models
Advanced MIG Package Model (K3883-12)
• ArcLink ® Control Cable
• Digital User Interface
• Track Section
• Heavy Duty Reel Stand
• Control Cable
Base Model (K3048-2, K3083-1)
• Lift Bail
• Conduit Tubing, 5 ft. (1.5 m)
• 5/32 in. (4.0 mm), 600 Amp
Structural Steel Package Model (K3883-13)
Contact Nozzle Assembly;
• Basic User Interface 5/32 in. (4.0 mm) Contact Tip
• Heavy Duty Reel Stand • Nozzle Extension, 5 in. (127 mm)
• Control Cable • Curved Nozzle Extension, 45°
• Gouge Kit • Nozzle Extension Insulator
• Lift Bail • Flux Tubing and Hose Clamps
• Wire Reel Assembly
Heavy Fab Package Model (K3883-14)
• Wheels for Track Operation
• Digital User Interface
• Front and Rear Outriggers
• Heavy Duty Reel Stand
• Enclosed Wire Reel (2 for Tandem)
• Control Cable (NOTE: Does not include a Control Cable)
• Lift Bale • Wire Straightener (2 for Tandem)

Flex Feed™ 84
Required Accessories for all models
• Drive Roll Kits
• Control Cable
• Weld Power Cable

Single Bench Model (K5000-2)

• Single Wire Drive
• Heavy Duty Wire Reel Stand
• #2-#4 Gun Adapter
• 30-tooth Pinion Gear
• Control Cable, 10 ft. (3.0 m)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/subarc | 113
SUBMERGED ARC & AUTOMATIC EQUIPMENT

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

NA-3 and NA-4 Controllers & Feed Heads FLEXTEC® 650X

Required Accessories for all models FLEXTEC® 650X/CE Filter One-Pak® Pkg. (K3515-1)
• Nozzle Assembly • FLEXTEC® 650X (K3425-1)
• Control Cable and Adapter • FLEXTEC® 650X CE Filter (K3129-1)
• Weld Power Cable
• Power Source FLEXTEC® 650X/LF-74 One-Pak® Pkg. (K3513-1)
• Wire Reel(s) and Mounting • FLEXTEC® 650X (K3425-1)
• Drive Roll and Guide Tube Kit • LF-74 Wire Feeder Bench Model, Heavy Duty
(no gun) (K2426-5)
• 3/0 Welding Cable, 10 ft (3.0 m) Lug to Lug
• 4/0 Work Lead Package, 15 ft. (4.6 m) Cable
NA-5 Controllers & Feed Heads
• Harris® Gas Regulator/Flowmeter and
Required Accessories for all models
10 ft. (3.0 m) Hose Kit (3100211)
• Nozzle Assembly
• 4-Roll Drive Roll and Wire Guide Kit,
• Control Cable and Adapter 1/16 in. (1.6 mm) Cored Shown:
FLEXTEC® 650X/LF-74
• Weld Power Cable • 4-Roll Drive Roll and Wire Guide Combination Kit, One-Pak ® Pkg.

• Power Source 0.035-0.045 in. (0.9-1.1 mm) Solid Wire

• Wire Reel(s) and Mounting • Magnum® PRO Curve™ 400 Gun and Cable,
• Drive Roll and Guide Tube Kit 15 ft (4.6 m)
• Gun Connector Kit
• Liner, .052-1/16 in. (1.3-1.6 mm) Diameter,
15 ft (4.6 m) Length
MAXsa® Controllers & Feed Heads
Required Accessories for all models FLEXTEC® 650X/Flex Feed® 84 One-Pak® Pkg. (K3514-1)
• Nozzle Assembly • FLEXTEC® 650X (K3425-1)
• Control Cable and Adapter • Flex Feed® 84 Single Bench Model, Heavy Duty
• Weld Power Cable (K5000-2)
• Power Source • 3/0 Welding Cable, 10 ft (3.0 m) Lug to Lug
• Wire Reel(s) and Mounting • 4/0 Work Lead Package, 15 ft. (4.6 m) Cable
• Drive Roll and Guide Tube Kit • Harris® Gas Regulator/Flowmeter and
10 ft. (3.0 m) Hose Kit (3100211)
• 4-Roll Drive Roll and Wire Guide Kit,
1/16 in. (1.6 mm) Cored
• Magnum® PRO Curve™ 400 Gun and Cable,
15 ft (4.6 m)
• Gun Connector Kit
• Liner, .052-1/16 in. (1.3-1.6 mm) Diameter,
15 ft (4.6 m) Length

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

114 | www.lincolnelectric.com/subarc
SUBMERGED ARC & AUTOMATIC EQUIPMENT

Accessories

Tandem Cruiser™ Tractor

NA-4 Controls & Heads

NA-5 Controls & Heads

NA-3 Controls & Heads

MAXsa® Controllers

Idealarc® DC1000

Idealarc® DC1500

Idealarc® AC1200
Flex Feed™ 74HT

Cruiser™ Tractor

Idealarc® DC600
and Feed Heads

FLEXTEC® 650X

AC/DC 1000® SD
Heavy Duty Flex Feed 84

Power Wave®
LT-7 Tractor
Single Bench, ™

Multi-Process
Heavy Duty

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model
Simple U/I,

Switch
model #s

model #s

model #s

model #s

K1288-22

K1288-18
K3883-11

K1288-17
K5000-2

K3048-2

K1386-4

K2803-1
K3140-2
K3083-1

K1386-3
K3425-1
various

various

various

various
K395-1
K227-1

K1275
Product Name Product No.

GENERAL
Submerged Arc Gun and Cable — • •
Assemblies(1)
Drive Roll and Guide Tube Kits(1) — • • • • •

Control Cables and Adapters (1)

— • • • • • • • •

Weld Power Cables(1) — • • • • • • •

Contact Nozzle Assembly for 3/32, 1/8 and K231-1 • • • • • •

5/32 in. (2.4, 3.2 and 4.0 mm) Wire
Positive Contact Nozzle Assembly K148A • • • • • •
for 3/32-1/8 in. (2.4-3.2 mm) Wire
Positive Contact Nozzle Assembly K148B • • • • • •
for 5/32-3/16 in. (4.0-4.8 mm) Wire
Wire Reel and Flux Tank Assembly K305 • •

Heavy Duty Process Sense Lead, K1811-50 •

50 ft. (15.2 m)
Heavy Duty Process Sense Lead, K1811-100 •
100 ft. (30.5 m)
Robotic Cable Adapter, 14-Pin to 22-Pin, K1805 •
18 in. (457 mm)
50-60 lb. (22.4-27.2 kg) Coil Adapter, K1504-1 • • • •
2 in. (50.8 mm) spindle
Plastic Wire Cover - up to 60 lbs. (27.2 kg) K1634-2 • •

Undercarriage K163-1 • •

Portable Digital Wire Feed Speed Meter K283 • •

LT-7 Drive Roll 052-1/16 (2 required) KP2268-1 • •

LT-7 Drive Roll 068-3/32 (2 required) KP2268-2 • •

LT-7 Drive Roll 3/32-3/16 (2 required) KP2268-3 • •

LT-7 Drive Roll 045-052 (2 required) KP2268-4 • •

Drive Roll Center 5/64-3/32 Tiny Twin KP1890-1 • •

Drive Roll Side 5/64-3/32 Tiny Twin KP1890-2 • •

Guide Tube Assembly 068-3/16 Incoming KP1984-1 • •

Guide Tube 3/32-3/16 Outgoing KP1985-1 • •

Guide Tube Outgoing Tiny Twinarc® KP1986-1 • •

Guide Tube Incoming Tiny Twin Tractor KP2127-1 • • • •

Control to Head Cable Extension, K335-26 •

26 ft. (7.9 m)
Control to Head Cable Extension, K338-46 •
46 ft. (14.0 m)
Nozzle Extension for K149-5/32 • • • • • •
5/32 in. (4.0 mm) Wire
Nozzle Extension, 5 in. (127 mm) KP2721-1 • •

Nozzle Extension, 45° KP2721-2 • • •

(1)
See charts in Drive and Cable Accessories Section for more details • Required • Optional

www.lincolnelectric.com/subarc | 115
SUBMERGED ARC & AUTOMATIC EQUIPMENT

Accessories

Tandem Cruiser™ Tractor

NA-4 Controls & Heads

NA-5 Controls & Heads

NA-3 Controls & Heads

MAXsa® Controllers

Idealarc® DC1000

Idealarc® DC1500

Idealarc® AC1200
Flex Feed™ 74HT

Cruiser™ Tractor

Idealarc® DC600
and Feed Heads

FLEXTEC® 650X

AC/DC 1000® SD
Heavy Duty Flex Feed 84

Power Wave®
LT-7 Tractor
Single Bench, ™

Multi-Process
Heavy Duty

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model
Simple U/I,

Switch
model #s

model #s

model #s

model #s

K1288-22

K1288-18
K3883-11

K1288-17
K5000-2

K3048-2

K1386-4

K2803-1
K3140-2
K3083-1

K1386-3
K3425-1
various

various

various

various
K395-1
K227-1

K1275
Product Name Product No.

GENERAL, CON’T.
Horizontal Fillet and Lap Adapter Kit K232 • •

Flat Fillet Adapter Kit K229 • •

Butt Seam Guide Kit K230 • •

Track Section, 70 in. (1.8 m) K396 • • • •

Concentric Flux Cone Assembly K285 • • • • • •

Tube and Clamp Kit K3090-1 • •

Cross Slide Assembly K3089-1 • •

Wire Straightener K1733-5 • • • • • •

Tiny Twinarc® Solid Wire Straightener K281 • • • •

Conduit KP3095-1 • •

Tiny Twin Kit K3070-1 • •

Butt Joint Guide K3154-1 • •

Start Controls P.C. Board for Automatics K221 • •

Crater Fill Controls P.C. Board for K245 • •

Automatics
Horizontal Adjuster, 2 in. (50.8 mm) K96 • • • •

Vertical Lift Adjuster, 4 in. (101.6 mm) K29 • • • •

TC-3 High Capacity Travel Carriage, K325HCS • • • •

Multiple Heads & Controls, 5-75 ipm.
Automatic Flux Hopper Assembly K219 • •

Wire Reel Assembly for K299

50-60 lb. (22.7-27.2 kg) Coils • • • •
(without high frequency insulation)
Spreadarc Oscillator K278-1 • • • •

Narrow Gap Deep Groove Nozzle K386 • • • •

Contact Jaw Assembly for K226R • • • •

1/8-7/32 in. (3.2-5.6 mm) Wire
Nozzle Tip KP2108-1B1 • •

Contact Tip, 5/64 in. (2.0 mm), KP2082-2B1 • •

3/8-24 in. (9.5-609.6 mm) thread
Liner Spring, 0.133 in. ID, 0.240 in. OD, KP2095-15
12.60 in. (3.4 mm ID, 6.1 mm OD, 320.0 • •
mm)
Contact Tip, Pressure Shoe Type, KP1966-2B1 • •
1/16 in. (1.6 mm) wire diameter
Weld Power Cable, Lug to Lug 4/0, 35 ft. K2163-35 •
(10.7 m), qty. 2
Weld Power Cable, Lug to Lug 4/0, K2163-60 •
60 ft. (18.3 m), qty. 2
Weld Power Cable, Lug to Lug 4/0, 600A, K1842-110
60%,110 ft. (33.5 m)

• Optional

116 | www.lincolnelectric.com/subarc
SUBMERGED ARC & AUTOMATIC EQUIPMENT

Accessories

Tandem Cruiser™ Tractor

NA-4 Controls & Heads

NA-5 Controls & Heads

NA-3 Controls & Heads

MAXsa® Controllers

Idealarc® DC1000

Idealarc® DC1500

Idealarc® AC1200
Flex Feed™ 74HT

Cruiser™ Tractor

Idealarc® DC600
and Feed Heads

FLEXTEC® 650X

AC/DC 1000® SD
Heavy Duty Flex Feed 84

Power Wave®
LT-7 Tractor
Single Bench, ™

Multi-Process
Heavy Duty

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model
Simple U/I,

Switch
model #s

model #s

model #s

model #s

K1288-22

K1288-18
K3883-11

K1288-17
K5000-2

K3048-2

K1386-4

K2803-1
K3140-2
K3083-1

K1386-3
K3425-1
various

various

various

various
K395-1
K227-1

K1275
Product Name Product No.

GENERAL, CON’T.
Severe Duty Contact Tip, 3/32 in. (2.4 mm) KP1962-3B1 • •

Severe Duty Contact Tip, 1/8 in. (3.2 mm) KP1962-1B1 • •

Severe Duty Contact Tip, 5/32 in. (4.0 mm) KP1962-4B1 • •

Severe Duty Contact Tip, 3/16 in. (4.8 mm) KP1962-2B1 • •

Severe Duty Contact Tip, 7/32 in. (5.6 mm) KP1962-5B1 • •

Extended Life Contact Tip, KP3162-3B1 • • •

3/32 in. (2.4 mm)
Extended Life Contact Tip, 1/8 in. (3.2 mm) KP3162-1B1 • • •

Extended Life Contact Tip, KP3162-4B1 • • •

5/32 in. (4.0 mm)
Extended Life Contact Tip, KP3162-2B1 • • •
3/16 in. (4.8 mm)
Extended Life Contact Tip, KP3162-5B1 • • •
7/32 in. (5.6 mm
Tiny Twinarc® Assembly K129-1/16 • • • •
for 1/16 in. (1.6 mm) Wire
Tiny Twinarc® Assembly K129-5/64 • • • •
for 5/64 in. (2.0 mm) Wire
Tiny Twinarc® Assembly K129-3/32 • • • •
for 3/32 in. (2.4 mm) Wire
Submerged Arc Twinarc® Nozzle for 5/64, K225 • • • •
3/32 and 1/8 in. (2.0, 2.4 and 3.2 mm) Wire
Tandem Arc Framework Assembly K387 • • •

Tandem Arc Wire Reels and Mountings K390 • • •

Flux Hopper Assembly K389 • • •

Control to Head Cable Extension, K338-46 •

46 ft. (14.0 m)
Control to Head Cable Extension, K335-26 •
26 ft. (7.9 m)
Solenoid Kit K223 •

Spindle Kit, 2 in. (50.8 mm) Hub K162-1 • •

Start or Crater Module K334 •

Weld Timer Module - max time 9.99 sec. K337-10 •

Remote Interface Module K336 •

Automatic Flux Hopper Assembly K219 • •

Mounting Bracket for TC-3 K2462-1 •

Multi-Process Switch K804-1 • • •

Arc Tracker™ K3019-1 • • • • • •

Multi-Process Switch K3091-1 •

Paralleling Kit* K1897-1 • • • • •

Paralleling Kit* K1611-1 • • •

NOTE » *On Idealarc DC600, cannot be used with VRD models. • Optional

www.lincolnelectric.com/subarc | 117
SUBMERGED ARC & AUTOMATIC EQUIPMENT

Accessories

Tandem Cruiser™ Tractor

NA-4 Controls & Heads

NA-5 Controls & Heads

NA-3 Controls & Heads

MAXsa® Controllers

Idealarc® DC1000

Idealarc® DC1500

Idealarc® AC1200
Flex Feed™ 74HT

Cruiser™ Tractor

Idealarc® DC600
and Feed Heads

FLEXTEC® 650X

AC/DC 1000® SD
Heavy Duty Flex Feed 84

Power Wave®
LT-7 Tractor
Single Bench, ™

Multi-Process
Heavy Duty

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model
Simple U/I,

Switch
K5000-2º

model #s

model #s

model #s

model #s

K1288-22

K1288-18
K3883-11

K1288-17
K3048-2

K1386-4

K2803-1
K3140-2
K3083-1

K1386-3
K3425-1
various

various

various

various
K395-1
K227-1

K1275
Product Name Product No.

GENERAL, CON’T.
All-Terrain Undercarriage K1737-1 • • • • •

Undercarriage - Hand moving K842 • • •

Inverter and Wire Feeder Cart K3059-4 •

Factory Undercarriage K1770-1 • •

42 Volt Transformer Kit K1520-1 • •

Remote Output Control, K857 • • •

25 ft (7.6 m), 6-pin
Remote Output Control, K857-1 • • •
100 ft (30.5 m), 6-pin
Amptrol™ Adapter Kit K843 • • •

12-pin to 6-pin adapter K2909-1 •

Remote Output Control, •

25 ft (7.6 m), 12-pin
Adapter Cable, Male 14-pin Control Cable K1798 • •
to Terminal Strip
Paralleling Kit K1900-1 •

CE Filter for FLEXTEC 650X

®
K3129-1 •

CE Filter K2444-3 •

Weld Fume Control System — • • • • • • • • • • • • • • • • • • •

WIRE FEEDERS
Flex Feed™ 74HT — •

Flex Feed 84™

— •

LT-7 — • • • • • •

Cruiser Tractor
™
— •

Tandem Cruiser™ Tractor — •

NA-3S — • • • • • • •

NA-4 — •

NA-5 — • • • • • • •

MAXsa® Controllers — • •

POWER SOURCES
Idealarc® DC600 — •

FLEXTEC® 650X — • • • • • • •

Idealarc DC1000
®
— •

Idealarc® DC1500 — •

Idealarc® AC1200 — •

Power Wave AC/DC 1000 SD

® ®
— • • •

2-YEAR EXTENDED WARRANTY — • • • • • • • • • • • • • • • • • • •

AVAILABLE

For more information on our Extended Warranty program, visit www.lincolnelectric.com/warranty • Optional

118 | www.lincolnelectric.com/subarc
WELDING GEAR
VIKING® HELMETS » Industrial Passive™ • 1740 Series • 1840 Series • 2450 Series • 2450D Series • 3350 Series • 3250D FGS™ • PAPR

RED LINE® APPAREL » Welding Gear Ready-Paks® • Gloves • Jackets / Shirts / Lab Coat / Apron / Sleeves • Caps / Doo Rags / Beanies •
Safety Glasses/Goggles/Face Shield

RADIUS® TOOLS » Magnetic Fixtures & Hand Lifters • Wire Brushes • Hand Tools • Holders and Clamps • Curtains / Blankets •
Rod Ovens • Welding Fluids
WELDING GEAR » VIKING® HELMETS
WELDING GEAR » VIKING™ HELMETS
VIKING® Industrial Passive™ Processes
• All
Low Cost, Low-Tech, High-Value Protection
Order Number
• Fixed Shade 11 • K3371-1
• 2 Year Warranty Industrial Passive

• Ratchet headgear
Literature
• Meets ANSI Z87.1 and CSA Z94.3 Standards E14.507
• An affordable option for students
• Hard hat and magnifying “cheater” lens capable

VIKING® 1740 Series Processes

• All
Great Welding Helmet at a Great Price
Order Number
• Perfect 1/1/1/1 optical clarity rating (EN379) • K3282-2 Black
• Weld & Grind Mode • K3495-2 ReCode™
• K4375-2 Ignition™
• Continuously variable 9-13 shade,
sensitivity and delay
Literature
• Hard hat and magnifying “cheater” lens capable E14.506
• 2 Year Warranty

Lens Variable Magnifying Grind Mode Light Delay Control TIG Cartridge View Temp. Net
Product Switching Shade/ ”Cheater” Shade/ Sensitivity Dark to Light Arc Amp Size Size Range Wt.
Name Speed Control Capable Lens Control Control (seconds) Sensors Rating in (mm) in (mm) °C (°F) oz (g)
VIKING® 1/25,000 9-13 / Yes 4/Internal Variable 0.1-1.0 2 AC/DC: DINS: 3.78 x 1.67 Operating 18.6
1740 seconds Internal Fully ≥ 5 Amp 4.33 x 3.54 (96 x 42.5) -10 to +55 (528)
Adjustable (110 x 90) (14 to 131)

Storage:
-20 to +70
(-4 to +158)

VIKING® 1840 Series Processes

• All
Superior Optical Clarity at a Superior Price
Order Number
• 4C™ Lens Technology • K3023-3 Black
• Perfect 1/1/1/1 optical clarity rating (EN379) • K3173-3 All American®
• K4175-3 Aztec™
• New pivot style head gear
• Convenient external shade control Literature
• Lightweight and compact E14.501

• Hard hat and magnifying “cheater” lens capable

• 3 Year Warranty

Lens Variable Battery Magnifying Grind Mode Light Delay Control TIG Cartridge/ Temp. Net
Product Switching Shade/ Replacement ”Cheater” Shade/ Sensitivity Dark to Light Arc Amp View Size Range Wt.
Name Speed Control Type Capable Lens Control Control (seconds) Sensors Rating in (mm) °C (°F) oz (g)
VIKING® 1/25,000 9-13 / CR2450 Yes 3.5/Internal Continuous 0.1-1.0 2 AC: Cartridge DINS: Operating: 18.8
1840 seconds Internal Replaceable Fully > 5 amp 4.33 x 3.54 -10 to +55 (533)
Lithium Adjustable (110 x 90) (14 to 131)
Battery DC:
(Qty. 1) > 3 amp View: Storage:
3.78 x 1.85 -20 to +70
(96 x 47) (-4 to +158)

120 | www.lincolnelectric.com/weldinggear
WELDING GEAR » VIKING® HELMETS

VIKING® 2450 Series Processes

• All
The Ideal Choice for the
Journeyman Fabricator Order Number
• K3028-3 Black
• 4C™ Lens Technology • K4411-3 White Tail Camo™
• K3029-3 Heavy Metal®
• Perfect 1/1/1/1 optical clarity • K3035-3 Street Rod®
rating (EN379) • K3174-3 All American®
• K3099-3 Graveyard Shift®
• Fastest switching speed in • K4437-3 Jessi the Welder
its class
• Designed for long hours of
comfortable wear with the Literature
new pivot style headgear E14.501
• Hard hat and magnifying
“cheater” lens capable
• 3 Year Warranty

Lens Variable Battery Magnifying Grind Mode Light Delay Control TIG Cartridge/ Temp. Net
Product Switching Shade/ Replacement ”Cheater” Shade/ Sensitivity Dark to Light Arc Amp View Size Range Wt.
Name Speed Control Type Capable Lens Control Control (seconds) Sensors Rating in (mm) °C (°F) oz (g)
VIKING® 1/25,000 5-13 / CR2450 Yes 3.5/Internal Continuous 0.1-1.0 4 AC: Cartridge US: Operating: 21
2450 seconds Internal Replaceable Fully > 2 amp 5.25 x 4.50 -10 to +55 (595)
Battery Adjustable (133 x 114) (14 to 131)
(Qty. 2) DC:
> 2 amp View: Storage:
3.82 x 2.44 -20 to +70
(97 x 62) (-4 to +158)

VIKING® 2450D Processes

• All
Are You Ready to Go Digital?
Order Number
• 4C™ Lens Technology • K3230-3 Black
• Digital push-button operator interface
• Welding, Cutting and Grind Modes Literature
E14.501
• Fastest switching speed in its class
• Hard hat and magnifying “cheater”
lens capable
• 3 Year Warranty

Lens Variable Battery Magnifying Grind Mode Light Delay Control TIG Cartridge/ Temp. Net
Product Switching Shade/ Replacement ”Cheater” Shade/ Sensitivity Dark to Light Arc Amp View Size Range Wt.
Name Speed Control Type Capable Lens Control Control (seconds) Sensors Rating in (mm) °C (°F) oz (g)
VIKING® 1/25,000 4-13 / CR2450 Yes 4 / Internal Digital 0.1-1.0 4 AC: Cartridge US: Operating: 21
2450D seconds Internal Replaceable Display Fully > 2 amp 5.25 x 4.50 -10 to +55 (595)
Battery Control Adjustable (133 x 114) (14 to 131)
(Qty. 2) DC:
> 2 amp View: Storage:
3.82 x 2.44 -20 to +70
(97 x 62) (-4 to +158)

www.lincolnelectric.com/weldinggear | 121
WELDING GEAR » VIKING® HELMETS

VIKING® 3250D FGS™ Processes

• All
The Single Helmet Solution
Order Number
• 4C™ Lens Technology • K3540-3 Black
• Wide screen viewing area
• Integrated “Flip-Up” grind shield Literature
E14.508
• Increases productivity and enhances safety
• Hard hat compatible
• 3 year warranty

Lens Variable Battery Magnifying Grind Mode Light Delay Control TIG Temp. Net
Product Switching Shade/ Replacement ”Cheater” Shade/ Sensitivity Dark to Light Arc Amp View Size Range Wt.
Name Speed Control Type Capable Lens Control Control (seconds) Sensors Rating in (mm) °C (°F) oz (g)
VIKING® 1/25,000 5-13 / CR2450 Yes 4 / Internal Digital 0.0-1.0 4 AC: 2.95 x 4.25 Operating: 28
3250D seconds Internal Replaceable Display Digital > 2 amp (75 x 108) -10 to +55 (793)
FGS Battery Control Adjustment (+14 to +131)
(Qty. 2) DC:
> 2 amp Storage:
-20 to +70
(-4 to +158)

VIKING® 3350 Series Processes

• All
Defining a New Standard
in Welding Helmets Order Number
• K3034-3 Black
• 4C™ Lens Technology • K4181-3 Foose Imposter™
• K4412-3 White Tail Camo™
• Perfect 1/1/1/1 optical • K4034-3 Code Red®
clarity rating (EN379) • K3616-3 Born To Weld™
• K3372-3 Jessi vs. The Robot™
• Largest viewing area • K4158-3 Zombie™
in the VIKING® line • K3175-3 All American®
• K3248-3 Twisted Metal®
• For the customer who
• K4440-3 Hot Rodders™
refuses to compromise • K3039-3 Terracuda®
• Superior comfort with • K3100-3 Motorhead®
• K3101-3 Mojo®
the pivot style headgear • K3428-3 Steampunk™
• Hard hat and magnifying • K3255-3 Polar Arc®
“cheater” lens capable
• 3 Year Warranty
Literature
E14.501

Lens Variable Battery Magnifying Grind Mode Light Delay Control TIG Cartridge/ Temp. Net
Product Switching Shade/ Replacement ”Cheater” Shade/ Sensitivity Dark to Light Arc Amp View Size Range Wt.
Name Speed Control Type Capable Lens Control Control (seconds) Sensors Rating in (mm) °C (°F) oz (g)
VIKING® 1/25,000 5-13 / CR2450 Yes 3.5/Internal Continuous 0.1-1.0 4 AC: Cartridge US: Operating: 21
3350 seconds Internal Replaceable Fully > 2 Amp 5.25 x 4.50 -10 to +55 (595)
Battery Adjustable (133 x 114) (14 to 131)
(Qty. 1) DC:
> 2 Amp View: Storage:
3.74 x 3.34 -20 to +70
(95 x 85) (-4 to +158)

122 | www.lincolnelectric.com/weldinggear
 SEE AND BE SEEN.
Lincoln Electric 4C® Lens Technology lets you see the puddle like never before.
The proprietary liquid crystal display (LCD) has a perfect optical rating and alters the visible color spectrum of the lens.
This provides the user an unparalleled view of the arc, puddle and base material while reducing eye strain.

STAND OUT FROM THE CROWD

With more than 25 different helmet designs to choose from.

For more information on 4C Lens Technology visit: offers.lincolnelectric.com/4C

AR17-18 ©2017 Lincoln Electric Global, Inc. All Rights Reserved.

WELDING GEAR » VIKING® HELMETS AND RED LINE® APPAREL

VIKING® 3350 PAPR Processes

• All
Three Component High Efficiency Filter System
Order Number
• 4C™ Lens Technology • K3930-1
• LIghtweight and comfortable
• Battery run time is a minimum Literature
of eight hours, outpacing E14.744
competing systems
• Audible and vibrating alarms
notifiy user of low air flow or
low battery
• NIOSH 42 CFR 84 Approved

Lens Variable Magnifying Grind Mode Light Delay Control TIG Cartridge View Temp. Net
Product Switching Shade/ ”Cheater” Shade/ Sensitivity Dark to Light Arc Amp Size Size Range Wt.
Name Speed Control Capable Lens Control Control (seconds) Sensors Rating in (mm) in (mm) °C (°F) lb (kg)
VIKING® 1/25,000 5-13 / Yes 3.5/Internal Continuous 0.1-1.0 4 AC: US: 3.74 x 3.34 Operating 6.19
3350 seconds Internal Fully >2 5.25 x 4.50 (95 x 85) -5 to +55 (2.8)
PAPR™ Adjustable Amp (133 x 114) (23 to 131) (Entire
system)
DC: Storage:
>2 -20 to +70
Amp (-4 to +158)

Standard Welding Gear Ready-Pak® Order Number

K4416-M
Get all the Welding Gear You Need K4416-L
K4416-XL
K4416-2XL
• Features Traditional Khaki FR Cloth Jacket and K4416-3XL
Industrial Passive Shade 11 Helmet
K3096-1
• Long lasting quality Replacement Lincoln
• Comfortable and stylish Industrial Duffle Bag

Literature
E14.743

124 | www.lincolnelectric.com/weldinggear
WELDING GEAR » RED LINE® APPAREL

Traditional Welding Gear Order Number

K3105-M
Ready-Pak® K3015-L
K3105-XL
All the Welding Gear a Student or K3105-2XL
Aspiring Welder Needs to Get Started K3105-3XL

K3096-1
• Features Traditional FR Cloth Jacket Replacement Lincoln
and VIKING® 1840 Black Helmet Industrial Duffle Bag
• Long lasting quality
• Comfortable and stylish
Literature
MC11-76

Jessi Combs Women’s Welding Gear Order Number

K3238-XS
Ready-Pak® K3238-S
K3238-M
Get all the Women’s Welding Gear K3238-L
You Need K3238-XL

K3096-1
• Jacket and gloves are sized and Replacement Lincoln
tailored for women Industrial Duffle Bag
• Features Jessi Combs Women’s
Shadow™ FR Welding Jacket
and Jessi vs. the Robot™ Literature
VIKING® 3350 Helmet MC13-174

• Long lasting quality

• Comfortable and stylish

Premium Welding Gear Ready-Pak® Order Number

K3236-M
Our First-Class Welding Gear Package K3236-L
K3236-XL
K3236-2XL
• Complete with top grade personal
protective equipment K3096-1
Replacement Lincoln
• Long lasting quality Industrial Duffle Bag
• Comfortable and stylish
Literature
MC12-81

www.lincolnelectric.com/weldinggear | 125
WELDING GEAR » RED LINE® APPAREL

Roll Cage™ Welding Rigging Gloves Order Number

Dual Purpose, Complete Protection K3109-S
K3109-M
• Silicone knuckles protect fingers and back of the K3109-L
K3109-XL
hand from impact and injury K3109-2XL
• Extended cuffs protect the wrists and forearms
from heat and sparks
• Palm padding reinforces high wear areas

Premium Leather Order Number

MIG/Stick Welding Gloves K2980-M
K2980-L
Crafted for Every-Day Duty K2980-XL

• Designed for optimal dexterity and durability

• Superior comfort, durability and dexterity
• Flame retardant foam lining provides heat
resistance

Heavy Duty MIG/Stick Order Number

Welding Gloves K4082-M
K4082-L
Crafted for Every-Day Heavy Duty K4082-XL

• High quality leather provides excellent

durability and abrasion protection
• Three layer hand design adds heat resistance,
comfort and durability

Traditional MIG/Stick Order Number

Welding Gloves K2979-ALL

Built to Protect, Built to Last

• One size fits all

• Designed for comfort and durability

126 | www.lincolnelectric.com/weldinggear
WELDING GEAR » RED LINE® APPAREL

Leather TIG Welding Gloves Order Number

Precision Fit for Precision Welding K2981-M
K2981-L
K2981-XL
• Optimal fit and dexterity for TIG
welding applications
• Heat-resistant gauntlet for
wrist protection

Heat-Resistant Welding Gloves Order Number

Be Cool, Be Comfortable K2982-L
K2982-XL
• Reflects 95% of radiant heat
• Aluminized rayon backing
• Unlined palm for increased control
and reduced fatigue

Full Leather Steelworker® Gloves

Order Number
Deliver Fit and Flexibility K2977-S
K2977-M
• Designed for light welding or metalworking K2977-L
K2977-XL
• Strong all-leather construction K2977-2XL
• Hook-and-loop wrist closure ensures
a snug fit

www.lincolnelectric.com/weldinggear | 127
WELDING GEAR » RED LINE® APPAREL

Traditional Split Order Number

Leather-Sleeved Jacket K3106-M
K3106-L
Minimum Weight, Maximum Durability K3106-XL
K3106-2XL
• Split cowhide sleeves resist spatter and wear K3106-3XL
and lightweight FR cloth keeps you cool
• Inside pocket and adjustable snap sleeves
• Good protection, economically priced

Shadow™ Grain Order Number

Leather-Sleeved Jacket K2987-M
K2987-L
Protection, Comfort and Freedom K2987-XL
K2987-XXL
• For MIG or stick welding K2987-XXXL

• Flip up collar and extra front panel

flap provide full closure
• Spatter guard lining
• Quality craftsmanship

Shadow™ Split Order Number

Leather-Sleeved Jacket K2986-M
K2986-L
Quality, Durability, Protection, Comfort: The K2986-XL
Ideal Jacket for MIG or Stick K2986-XXL
K2986-XXXL
K2986-5XL
• Split cowhide sleeves and cool FR material
on the chest
• Ideal for stick and MIG welding
• Flip up collar and and a lined flap on the
back close for extra protection
• Two horizontal hip pockets with
secured flaps

Heavy-Duty Leather Order Number

Welding Jacket K2989-M
K2989-L
Protection for the Tough Jobs K2989-XL
K2989-XXL
K2989-XXXL
• Heavy-duty split cowhide leather chest
and sleeves provide superior protection
• FR cloth back keeps you cool
• Ideal for heavy stick and MIG welding
• Flip up collar, extra front flap for full
closure and spatter guard lining

128 | www.lincolnelectric.com/weldinggear
WELDING GEAR » RED LINE® APPAREL

Traditional FR Cloth Jacket – Khaki Order Number

The Ideal Light Duty Welding Jacket K3317-M
K3317-L
• Crafted from 100% flame-retardant material K3317-XL
K3317-2XL
• Provides maximum protection K3317-3XL
• Adjustable dual snap sleeves and
convenient inside pocket

Traditional FR Cloth Jacket – Black Order Number

The Ideal Light Duty Welding Jacket K2985-M
K2985-L
• Crafted from 100% flame-retardant material K2985-XL
K2985-XXL
• Provides maximum protection K2985-XXXL
• Adjustable dual snap sleeves and
convenient inside pocket

FR Welding Shirt – Khaki Order Number

Safety and Comfort in a Single Shirt K3382-M
K3382-L
• Ideal for light-duty welding K3382-XL
K3382-2XL
• Durable enough for daily use
• Adjustable dual-snap sleeves
• Features a single pocket with flap
and pencil holder

FR Welding Shirt – Black Order Number

Safety and Comfort in a Single Shirt K3113-M
K3113-L
• Ideal for light-duty welding K3113-XL
K3113-2XL
• Durable enough for daily use K3113-3XL
• Adjustable dual-snap sleeves
• Features two chest pockets with flaps
and a pencil holder slot

www.lincolnelectric.com/weldinggear | 129
WELDING GEAR » RED LINE® APPAREL

FR Welding Lab Coat Order Number

All-Purpose Protection K3112-M
K3112-L
• 9 oz. 100% flame retardant material K3112-XL

• Knee length offers extended protection

for light-duty welding
• Ideal for instructors, supervisors and
occasional welders

Split-Leather Welding Apron Order Number

Provides an Extra Layer of Protection K3110-ALL

• Heavy-duty split cowhide construction

• Harness system adjusts to any size and weight
• Great addition for any welding jacket or shirt

Split-Leather FR Order Number

Welding Sleeves K3111-ALL

Stay Protected, Stay Cool

• Durable, flame-retardant material

adds spatter and heat resistance
• Split leather panels in high wear areas

Custom Embroidery Available!

Get custom Red Line™ apparel for your school
or shop, or personalize it just for you.

• Add custom single or multi-color logos to Choose

Choose
Red Line™ FR cloth jackets, welding shirts Right Chest
Left Sleeve
Location
or lab coats Location

• Order at: www.lincolnelectric.logoshop.com

130 | www.lincolnelectric.com/weldinggear
WELDING GEAR » RED LINE® APPAREL

Welding Doo Rag FR Order Number

Do the Lincoln Rag K2993-ALL

• 100% flame retardant material

• Mesh lining for fast sweat evaporation
• Machine washable

All American™ Doo Rag Order Number

American Headgear K3204-ALL

• 100% cotton
• Mesh lining for fast sweat evaporation
• Machine washable

All American™ Welding Cap Order Number

Stars, Stripes and Sparks K3203-ALL

• 100% cotton
• Cushioned insert provides comfort and
absorbs sweat
• Flat-stitched seams for superior comfort
• Machine washable

Welding Beanie FR Order Number

Top Off with Lincoln Electric K2994-L
K2994-XL
• Machine washable
• Flame-retardant

www.lincolnelectric.com/weldinggear | 131
WELDING GEAR » RED LINE® APPAREL

Padded Safety Glasses Meets Requirements

Padded Safety Glasses are • ANSI Z87.1
• CSA Z94.3
Easy on the Eyes
Order Number
• Comfortable, non-slip strap material K3119-1
• 360° foam liner keeps dust out and
enhances comfort
• For long hours of comfort

Face Shield Meets Requirements

Full Frontal Production • ANSI Z87.1
• CSA Z94.3
• Large, impact-resistant shield wraps
Order Number
around entire face K3120-1
• Ideal for grinding, polishing, deburring KP3164-1 (Lens only)
and other operations

Shade 5 Cutting and Meets Requirements

Grinding Goggles • ANSI Z87.1

Shades of Production Order Number

K3118-1
• For plasma and oxyfuel cutting operations
• 100% surface seal keeps sparks, spatter,
particles, sand, dirt and heat away from
your eyes

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Shade 3 Cutting and Meets Requirements

Grinding Goggles • CSA Z94.3
• ANSI Z87.1
Shades of Production
Order Number
• For chipping, grinding and machining operations. K3118-2

• 100% surface seal keeps sparks, spatter,

particles, sand, dirt and heat away from
your eyes

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

132 | www.lincolnelectric.com/weldinggear
WELDING GEAR » RED LINE® APPAREL

Finish Line™ Clear Safety Glasses Meets Requirements

• ANSI Z87.1+
Safe, Sleek and Stylish • CSA Z94.3

Order Number
• Flexible nosepiece and adjustable temple tips
K2966-1
for added comfort
• Special anti-fog coating reduces lens fogging
• Blocks 99.9% of UV-A,B, & C Radiation

Women’s Starlite® Meets Requirements

• ANSI Z87.1+
Clear Safety Glasses • CSA Z94.3
Safe, Sleek and Stylish Order Number
K3250-S
• Sized 10% smaller than our similar models K3250-M
• Light weight makes these models easy to wear
• Anti-fog and anti-scratch coating

Lincoln Starlite® Clear Safety Glasses Meets Requirements

• ANSI Z87.1+
Safe, Sleek and Stylish • CSA Z94.3

Order Number
• Light weight makes these models easy to wear
K2965-1
• Special anti-fog coating reduces lens fogging
• Blocks 99.9% of UV-A,B, & C Radiation

Traditional Lincoln Clear Meets Requirements

• ANSI Z87.1+
Safety Glasses
Order Number
Traditional Safety Glasses K3104-1

• Frameless clear lens

• Light weight makes these models easy to wear
• Inexpensive and ideal for student, team or bulk
purchases

Lincoln Cover 2® Clear Safety Glasses Meets Requirements

• ANSI Z87.1+
Protect Your Eyes and Your Glasses • CSA Z94.3

Order Number
• Worn over your own prescription glasses
K2968-1
• Ratcheting adjustable-length temples
• Integrated brow guard and side shields offer
added impact protection
• Blocks 99.9% of UV-A,B, & C Radiation

Bifocal Clear Safety Glasses Meets Requirements

• ANSI Z87.1
See Safety More Clearly
Order Number
• Full eye coverage K3117-100 1.0 Diopter
K3117-150 1.5 Diopter
• Slip resistant temples K3117-200 2.0 Diopter
K3117-250 2.5 Diopter

All trademarks and registered trademarks are the property of their respective owners. www.lincolnelectric.com/weldinggear | 133
WELDING GEAR » RED LINE® APPAREL

Finish Line™ Outdoor Safety Glasses Meets Requirements

• ANSI Z87.1+
Keep Your Eye on the Finish Line • CSA Z94.3

• Flexible nosepiece and adjustable temple tips Order Number

K2970-1
for added comfort
• Special anti-fog coating reduces lens fogging
• Blocks 99.9% of UV-A,B, & C Radiation

Lincoln Starlite® Meets Requirements

• ANSI Z87.1+
Outdoor Safety Glasses • CSA Z94.3
Safe, Sleek and Stylish Order Number
K2969-1
• Silver mirror coating added to the lens for
protection from the sun
• Frameless lens provides a wide field of vision
• Blocks 99.9% of UV-A,B, & C Radiation

I-Beam™ Red Outdoor Safety Glasses Meets Requirements

• ANSI Z87.1+
Sturdy Protection • CSA Z94.3

Order Number
• Durable impact protection
K2972-1
• Flexible nosepiece and temple tips
add comfort
• Silver mirror lens
• Blocks 99.9% of UV-A,B, & C Radiation

I-Beam™ Black Meets Requirements

• ANSI Z87.1+
Outdoor Safety Glasses • CSA Z94.3
Sturdy Protection Order Number
K2971-1
• Durable impact protection
• Flexible nosepiece and temple tips
add comfort
• Red mirror lens
• Blocks 99.9% of UV-A,B, & C Radiation

Lincoln Starlite® IR 5 Safety Glasses Meets Requirements

• ANSI Z87.1+
Infra-Red Shielding • CSA Z94.3

Order Number
• Shade 5 infra-red protection intended for
K2967-1
cutting and grinding
• Unitary frameless style provides a wide
field of vision
• Blocks 99.9% of UV-A,B, & C Radiation

134 | www.lincolnelectric.com/weldinggear All trademarks and registered trademarks are the property of their respective owners.
WELDING GEAR » RED LINE® APPAREL » WOMEN’S HELMETS AND APPAREL

Jessi vs.The Robot™ Auto-Darkening Welding Helmet Processes

• All
VIKING® 3350 Series
Order Number
K3372-3
• 4C™ Lens Technology
• Perfect 1/1/1/1 optical clarity rating (EN379) Literature
E14.501
• Largest viewing area in the VIKING line
®

• For the customer who refuses to compromise

• Superior comfort with the pivot style headgear

Jessi The Welder™ Auto-Darkening Welding Helmet Processes

• All
VIKING® 2450 Series
Order Number
K4437-3
• 4C Lens Technology
• Perfect 1/1/1/1 optical clarity rating (EN379) Literature
E14.501
• Largest viewing area in the VIKING line
®

• 3 Year Warranty

Jessi Combs Women’s Shadow™ Welding Jacket Order Number

K3114-XS
A Jacket Designed with Women in Mind K3114-S
K3114-M
K3114-L
• Split cowhide sleeves with cooling FR cloth
K3114-XL
front and back
• Flip up collar, adjustable snap sleeves and
Literature
snap cinch waist MC12-107
• Two horizontal flap pockets
• Ideal for MIG or stick welding

Jessi Combs MIG/Stick Welding Gloves Order Number

K3232-S
Not Your Brother’s Welding Gloves K3232-M

• Designed and sized for women’s hands

Literature
• Durable split cowhide and cotton lining MC12-107
• Long-lasting work life

Jessi Combs Women’s Steelworker® Gloves Order Number

K3231-XS
For Her: A Glove For The Multi-Tasker K3231-S
K3231-M
• Sized for women’s hands
Literature
• Top grain cowhide ensures MC12-107
durability and maximizes dexterity
• For fabrication or light welding
• All leather construction

Women’s Starlite® Clear Safety Glasses JESSI COMBS

Safe, Sleek and Stylish Metal fabricator,
TV personality and
See page 141 fastest woman land
speed record holder.

www.lincolnelectric.com/weldinggear | 135
WELDING GEAR » RADIUS™ TOOLS

Pivot Angle Magnetic Fixture Order Number

Tacking Welds Just Got Easier • K3310-1

• Designed for repetitive work at

Literature
uncommon angles E14.800
• Convenient single lock handle makes it
fast and easy to select an angle

Multi Angle Fixture Order Number

Tacking Welds Just Got Easier • K3309-1

• Set up in seconds Literature

• Magnet technology allows for complete E14.800
on/off control and precise positioning
• Easy to position on flat or round stock

Mini Multi Angle Fixture Order Number

Tacking Welds Just Got Easier • K3318-1

• Designed for small steel parts Literature

• Pipe notch for use on round stock E14.800

• No batteries or electricity required

Manual Hand Lifter Order Number

Get a Handle on Steel • K3311-1

• For small part lifting and sheet dragging Literature

• Work faster and more efficiently with E14.800
fewer injuries
• No batteries or electricity required

Electric Hand Lifter Order Number

Battery Powered Steel Handling • K3312-1

• No cords to clutter the workplace Literature

• For small part handling and removing parts E14.800
from burn tables
• Battery power light blinks when battery
needs recharging
• 60 lb (27.2 kg) lifting force

136 | www.lincolnelectric.com/weldinggear
WELDING GEAR » RADIUS™ TOOLS

Stainless Steel & Aluminum Welding Length, in. (mm)

3 X 7 Row Stainless Steel Wire Brush • 7.5 (191) (3x7 Brush)
This handy toothbrush style is just right for • 8.5 (216) (2x9 Brush)
• 13.75 (349) (3x19 Brush)
light cleaning on stainless steel in confined
or hard to reach areas.
Order Number
2 X 9 Row Stainless Steel Wire Brush • K3179-1 (3x7 Brush)
• K3180-1 (2x9 Brush)
A slight curve in the handle improves grip. Ideal • K3181-1 (3x19 Brush)
for general or light cleaning on stainless steel.

3 X19 Row Stainless Steel Wire Brush

This general purpose brush is intended for long life
and efficient surface cleaning on stainless steel.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Alloy Welding
Length, in. (mm)
3 X 7 Row Brass Wire Brush for Aluminum • 7.5 (191) (3x7 Brush)
This compact toothbrush style can be used for • 8.5 (216) (2x9 Brush)
light cleaning on aluminum in confined or hard to
reach areas. Brass bristles are easy on aluminum Order Number
surfaces. • K3182-1 (3x7 Brush)
• K3183-1 (2x9 Brush)
2 X 9 Row Brass Wire Brush for Aluminum
The slightly curved handle improves grip
for general light cleaning on aluminum.
Brass bristles gently remove oxide layer
on aluminum.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Carbon Steel Welding

Length, in. (mm)
3 X19 Row Carbon Steel Wire Brush • 13.75 (349) (3x19 Brush)
Select this popular tempered steel bristle pattern • 9.5 (241) (4x16 Brush)
for efficient general cleaning on carbon steels.
Order Number
4 X16 Row Carbon Steel Wire Brush • K3184-1 (3x19 Brush)
Tempered steel bristles make fast work of rust, • K3185-1 (4x16 Brush)
mill scale and paint on carbon steels. Comfortable
curved handle.

Combination Packs
Length, in. (mm)
Wire Brush Three Pack • 7.5 (191)
This compact toothbrush style set is easy to stow
in your bag and perfect for small projects. Includes
brass bristle brush for aluminum, stainless bristle Order Number
• K3189-1
brush for stainless steel and a nylon bristle brush
for general cleaning on carbon steel.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/weldinggear | 137
WELDING GEAR » RADIUS™ TOOLS

Chipping Hammer Processes

Tackle Dirt and Slag Head-On • Stick
• Flux-Cored
• Shock reducing spiral handle with hook
• Head includes spike and flat sides Order Number
K4022-1

Literature
E14.742

Welper® Processes
Multi-Use MIG Tool • MIG
• Flux-Cored
• Designed for MIG welding operations with eight
functions in a single pair of pliers Order Number
• Spring loaded for easy opening and closing K4014-2

• Comfortable handle
Literature
• Chrome vanadium steel E14.740

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Welding Pliers
Processes
Single Tool, Multiple Functions • MIG

• Up to six functions
Order Number
• Spring loaded for easy opening and closing K4014-1
• Heat treated for durability
Literature
E14.741

138 | www.lincolnelectric.com/weldinggear
WELDING GEAR » RADIUS™ TOOLS

T300 Electrode Holder Order Number

The Pipeline Staple • K909-6

• 300A Rating, 60% Duty Cycle, DC Current Only

Literature
• 5/32 in. (4.0mm) diameter electrode and smaller www.lincolnelectric.com
• Manufactured in Cleveland, Ohio

EH-305 Heavy Duty Electrode Holder Order Number

Comfort, Quality & Consistency • K909-7

• Insulated stick electrode holder designed for Literature

reliable performance and enhanced operator www.lincolnelectric.com
comfort.
• For electrode diameters 1/8-1/4 in. (3.2-6.4mm).
• Rated at 300 amps, 60% duty cycle or 400 amps,
35% duty cycle

EH-405 Heavy Duty Electrode Holder Order Number

Comfort, Quality & Consistency • K909-8

• Insulated stick electrode holder designed for Literature

reliable performance and enhanced operator www.lincolnelectric.com
comfort
• For electrode diameters 1/8-5/16 in (3.2-7.9mm)
• Rated at 400 amps, 60% duty cycle or 500 amps,
35% duty cycle

GC-300 Ground Clamp Order Number

Reliable Conductivity • K910-1

• Easy operation. Just squeeze, slip jaws over the Literature

work and let go. No bolts or nuts to tighten. www.lincolnelectric.com
• Jaws open full 2-1/2 in (63 mm). Welding cable lug
bolts directly to the work clamp. Heavy spring
tightly clamps jaws to work or table.
• Rated 300 amps at 60% duty cycle.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

GC-500 Ground Clamp Order Number

Reliable Conductivity • K910-2

• Easy operation. Just squeeze, slip jaws over the Literature

work and let go. No bolts or nuts to tighten. www.lincolnelectric.com
• Jaws open full 2-1/2 in (63 mm). Welding cable lug
bolts directly to the work clamp. Heavy spring
tightly clamps jaws to work or table.
• Rated 500 amps at 60% duty cycle.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/weldinggear | 139
WELDING GEAR » RADIUS™ TOOLS

Welding Curtain, Meets Requirements

6 x 6 ft. (1.8 x 1.8 m) • FM approved for
ANSI/FM 4950
Bring the Curtain Down on Sparks
and Spatter
Order Number
K3252-1
• Intended to be hung vertically
• Rated for temperatures up to
1022°F (550°C)
• Protects workers from injury and parts
and equipment from damage

Welding Blanket, Meets Requirements

6 x 6 ft. (1.8 x 1.8 m) • FM approved for
ANSI/FM 4950
We’ve Got You Covered
Order Number
• Intended to be used horizontally
K3253-1
• Rated for temperatures up to
1,022°F (550°C)
• Protects workers from injury and parts
and equipment from damage
• Easy to position in any shop

High Temperature Welding Blanket, Meets Requirements

6 x 6 ft. (1.8 x 1.8 m) • FM approved for
ANSI/FM 4950
Keep the Heat Off

• Intended to be used horizontally Order Number

K3254-1
• Rated for temperatures up to
2012°F (1,100°C)
• Protects workers from injury and parts
and equipment from damage
• Easy to position in any shop

140 | www.lincolnelectric.com/weldinggear
WELDING GEAR » RADIUS™ TOOLS

Hydroguard® Processes
Rod Canister • Stick

Easy to Carry. Easy to Protect.

Order Number
K3166-1
• Protect and carry 10 lb. (4.5 kg) of K3167-1 (strap)
stick electrode up to 14 in. (355.6 mm)
in length
• Rubber seal makes the container
moisture-resistant

Hydroguard® Processes
Portable Welding Rod Oven • Stick

Outstanding Moisture Resistance for

Improved Weld Quality Output
Preset at 300°F (149°C)

• Transport a maximum of 10 lb. (4.5 kg) of up to 18 Input

in. (457.2 mm) electrode
• Maintains electrodes at a constant 300°F (149°C)
temperature
• Power-On light to visually confirm operation Order Number
K2939-1 (115V)
K2939-2 (230V)

Literature
E14.701

Hydroguard® Processes
Bench Rod Oven • Stick Electrode
• MIG Wire
Outstanding Moisture Resistance
for Improved Weld Quality
Output
100-550°F
• Circular Shape Directs Airflow (38-288°C)
• Adjustable Thermostat Input
• Flexible Interior Configuration
• Variable Moisture Vent
• Handy Shelf
Order Number
• Data Logger Capable K2942-1 (120V)
K2942-2 (240/480V)
K3148-1 (Thermometer Kit)

Literature
E14.702
NOTE » Date Logger Capable

www.lincolnelectric.com/weldinggear | 141
WELDING GEAR » WELDING FLUIDS

RP6 Weldable Rust Base Material

• Ferrous
Preventative Fluid
Apply. Store. Weld. Application
• Brush
• Provides indoor corrosion protection for up to • Spray
• Dip
6 months
• Will not adversely affect the welding process
Order Number
• K4127-2 (5 Gallon Pail)
• K4127-1 (55 Gallon Drum)

Literature
E14.901.1

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

142 | www.lincolnelectric.com/weldinggear
WELDING GEAR

Specifications Chart » VIKING® 3350 PAPR

PAPR (Powered Air-Purifying Respirator)
Specifications
Size of Blower Assembly (W x T x D) 8 x 7.5 x 3 in. (203 x 191 x 76 mm)
Weight of Blower (including battery, belt and filters) 2.20 lb. (1.0 kg)
Air Flow Low Speed: 180+ Ipm (6+ cfm)
High Speed: 210+ Ipm (7.4+ cfm)
Operating Temperature 23° to 131°F (-5° to 55°C)
Battery Type Lithium Ion (Rechargeable)
Battery Charge Time Three hours
Battery Charges 500 charges
Belt Size(1) 29 to 52 in. (736 to 1321 mm)
Respirator Approval (2)
NIOSH 42 cfr 84 Approved Powered Air-Purifying Respirator (PAPR)
Assigned Protection Factor(3) 25
Helmet Replacement Battery CR 2450
Battery Life 8 Hours
Charge 115 Volt Input
Alarms Audible and Vibrate
Head Gear FR Flame Retardant
Optical Class 1/1/1/1 (per EN 379)
Lens Switching Speed (sec) 1/25,000
Variable Shade/Control 5-13 Internal
Magnifying “Cheater” Capable Lens Yes
Grind Mode Shade/Control 3.5 Internal
Light Sensitivity Control Continuous
Delay Control Dark to Light (sec) 0.1 -1.0 Fully Adjustable
Arc Sensors 4
TIG AMP Rating DC > 2 Amp
AC > 2 Amp
Helmet Compliance ANSI Z87.1-2010, CSA Z94.3, CE
Cartridge Size US 5.25 x 4.50 in. (133 x 114 mm)
View Size 3.7 x 3.34 in. ( 95 x 85mm)
Blower Assembly 1 Year Warranty
ADF Helmet 3 Year Warranty

(1)
Belt size maximum of 60 in. (1524 mm) with belt extension accessory.
(2)
Refer to NIOSH respirator approval label for system configuration.
(3)
APF=25 for loose fitting Powered Air-Purifying Respiratory according to OSHA 3352-02 2009, when the employer implements a continuing,
effective respirator program in compliance with the Respiratory Protection Standard (29 CFR 1910).

144 | www.lincolnelectric.com/weldinggear
WELDING GEAR

Specifications Chart
Welding Gloves
HAND SIZING FOR GLOVES (measure the width of the hand as shown)
Mens Gloves – in (cm) Womens Gloves – in (cm)
Product Small Medium Large X Large 2X Large X Small Small Medium
Name Number 8.0 (20) 8.5 (22) 9.0 (23) 9.5 (24) 10.0 (25) 7.0 (18) 7.5 (19) 8.0 (20)
Roll Cage™ Welding Rigging Gloves K3109-xx • • • • •

Premium Leather MIG/Stick Welding Gloves K2980-xx • • •

Heavy Duty MIG/Stick Welding Gloves K4082-xx • • •

Traditional MIG/Stick Welding Gloves K2979-xx • • • • •

Full Leather Steelworker Gloves

®
K2977-xx • • • • •

Leather TIG Welding Gloves K2981-xx • • •

Heat-Resistant Welding Gloves K2982-xx • •

Jessi Combs Women’s MIG/Stick Welding Gloves K3232-xx • •

Jessi Combs Women’s Steelworker® Gloves K3231-xx • • •

www.lincolnelectric.com/weldinggear | 145
WELDING GEAR

Specifications Chart
Welding Apparel
Part No./ Chest Measurement Sleeve Length Torso Size Coat Length Part No./ Chest Measurement Sleeve Length Torso Size Coat Length
Size in (cm) in (cm) in (cm) in (cm) Size in (cm) in (cm) in (cm) in (cm)
Traditional Split Leather-Sleeved Jacket FR Welding Shirt
K3106-M 40-42 (102-107) 31 (79) 30 (76) Khaki
K3106-L 44-46 (112-117) 32 (81) 30 (76) K3382-M 40-42 (102-107) 32 (81) 32 (81)
K3106-XL 48-50 (122-127) 33 (84) 30 (76) K3382-L 44-46 (112-117) 33 (84) 33 (84)
K3106-2XL 52-54 (132-137) 34 (86) 30 (76) K3382-XL 48-50 (122-127) 34 (86) 34 (86)
K3106-3XL 56-58 (142-147) 35 (89) 30 (76) K3382-2XL 52-54 (132-137) 35 (89) 35 (89)
Shadow Grain Leather-Sleeved Jacket
™
Black
K2987-M 40-42 (102-107) 31 (79) 30 (76) K3113-M 40-42 (102-107) 32 (81) 32 (81)
K2987-L 44-46 (112-117) 32 (81) 31 (79) K3113-L 44-46 (112-117) 33 (84) 33 (84)
K2987-XL 48-50 (122-127) 33 (84) 32 (81) K3113-XL 48-50 (122-127) 34 (86) 34 (86)
K2987-2XL 52-54 (132-137) 34 (86) 33 (84) K3113-2XL 52-54 (132-137) 35 (89) 35 (89)
K2987-3XL 56-58 (142-147) 35 (89) 34 (86) K3113-3XL 56-58 (142-147) 36 (91) 36 (91)
Shadow™ Split Leather-Sleeved Jacket FR Welding Lab Coat
K2986-M 40-42 (102-107) 31 (79) 30 (76) K3112-M 40-42 (102-107) 31 (79) 45 (114)
K2986-L 44-46 (112-117) 32 (81) 31 (79) K3112-L 44-46 (112-117) 32 (81) 45 (114)
K2986-XL 48-50 (122-127) 33 (84) 32 (81) K3112-XL 48-50 (122-127) 33 (84) 45 (114)
K2986-2XL 52-54 (132-137) 34 (86) 33 (84) Split Leather Welding Apron
K2986-3XL 56-58 (142-147) 35 (89) 34 (86) K3110-ALL One Size Fiits All
K2986-5XL 60-66 (152-168) 35 (89) 34 (86) Split Leather FR Welding Sleeves
Heavy Duty Leather Welding Jacket K3111-ALL 21 (53)
K2989-M 40-42 (102-107) 31 (79) 30 (76)
K2989-L 44-46 (112-117) 32 (81) 31 (79)
K2989-XL 48-50 (122-127) 33 (84) 32 (81) Part No./ Bust Size Sleeve Length Torso Size Waist Size
Size in (cm) in (cm) in (cm) in (cm)
K2989-2XL 52-54 (132-137) 34 (86) 33 (84)
Jessi Combs Women’s Shadow™ Split Leather-Sleeved Jacket
K2989-3XL 56-58 (142-147) 35 (89) 34 (86)
K3114-XS 32-36 (81-91) 28 (71) 27 (68) 28-32 (71-81)
Traditional FR Cloth Jacket
K3114-S 36-39 (91-99) 28 (71) 27 (68) 32-34 (81-86)
Khaki
K3114-M 39-41 (99-104) 29 (74) 27 (68) 34-36 (86-91)
K3317-M 40-42 (102-107) 31 (79) 30 (76)
K3114-L 41-43 (104-109) 30 (76) 27 (68) 36-38 (91-96)
K3317-L 44-46 (112-117) 32 (81) 30 (76)
K3114-XL 43-46 (109-117) 31 (79) 27 (68) 38-42 (96-107)
K3317-XL 48-50 (122-127) 33 (84) 30 (76)
K3317-2XL 52-54 (132-137) 34 (86) 30 (76)
K3317-3XL 56-58 (142-147) 35 (89) 30 (76)
Black
K2985-M 40-42 (102-107) 31 (79) 30 (76)
K2985-L 44-46 (112-117) 32 (81) 30 (76)
K2985-XL 48-50 (122-127) 33 (84) 30 (76)
K2985-2XL 52-54 (132-137) 34 (86) 30 (76)
K2985-3XL 56-58 (142-147) 35 (89) 30 (76)

146 | www.lincolnelectric.com/weldinggear
WELDING GEAR

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

Welding Gear Ready-Pak® Packages VIKING® 3350 PAPR™

Standard Welding Gear Ready-Pak ®
Includes
• Lincoln Industrial Duffle Bag • Blower Unit
• Industrial Passive Welding Helmet • VIKING® 3350 Black Helmet
• Traditional Khaki FR Cloth Jacket • Head Cover
• Traditional MIG/Stick Welding Gloves • Hose
• Lincoln Startlite® Clear Safety Glasses • 2 Particulate Filters
• Welding Doo Rag FR • 29-52 in. (736.6-1,320.8 mm) Padded Belt
• Spring Handle Chipping Hammer • Shoulder Strap
• Radius™ Welding Pliers • 120V Battery Charger
• Radius 3 x19 Carbon Steel Wire Brush • Duffle Bag
• Rechargeable Battery
Traditional Welding Gear Ready-Pak® • Pre-Filter
Shown:
• Lincoln Industrial Duffle Bag • Spark Guard Standard Welding Gear
• VIKING® Black 1840 Series Auto-Darkening Helmet • Hose Cover Ready-Pak®

• Traditional FR Cloth Jacket • Extra helmet cover lenses:

• Roll Cage™ Welding Rigging Gloves - Inside quantity, 2
- Outside quantity, 5
• Full Leather Steelworker™ Gloves
• Instruction Manual
• Lincoln Starlite® Clear Safety Glasses
• Welding Doo Rag FR

Jessi Combs Women’s Welding Gear Ready-Pak®

• Lincoln Industrial Duffle Bag
• VIKING® Jessi vs. The Robot™ 3350 Series
Auto-Darkening Helmet Shown:
• Jessi Combs Women’s Shadow™ FR Welding Jacket VIKING™ 3350 PAPR™

• Jessi Combs MIG/Stick Welding Gloves

• Jessi Combs Steelworker ® Gloves
• Women’s Starlite® Clear Safety Glasses
• Welding Doo Rag FR

Premium Welding Gear Ready-Pak®

• Lincoln Industrial Duffle Bag
• VIKING® Black 3350 Series Auto-Darkening Helmet
• Shadow™ Split Leather-Sleeved Jacket
• Roll Cage™ Welding Rigging Gloves
• Full Leather Steelworker ® Gloves
• Finish Line™ Clear Safety Glasses
• Split Leather FR Welding Sleeves
• Welding Doo Rag FR

www.lincolnelectric.com/weldinggear | 147
WELDING GEAR

Replacement Parts » Welding Helmets

VIKING® Industrial Passive™

VIKING® 2450D Series

VIKING® 2450 Series

VIKING® 3350 Series

VIKING® 1840 Series
VIKING® 1740 Series
Product Package Product
Name Dimensions Quantity Number

Shade 11 Filter Plate 4.50 x 5.25 in. (114 x 133 mm) 1 KP4003-1 •

1740 ADF Cartridge DIN 110 X 90 1 KP3284-2 •

1840 ADF Cartridge DINS 110 X 90 1 KP2853-3 •

2450 Series ADF Cartridge STD 4 X 5 1 KP2932-3 •

2450D Series ADF Cartridge STD 4 X 5 1 KP3243-3 •

3350 Series ADF Cartridge STD 4 X 5 1 KP3045-3 •

1840 Inside Cover Lens 96 x 51.6 x 1.0 mm (3.78 x 2.03 x .04 in) 5 KP2897-1 •

2450/3350 Outside Clear Cover Lens 114 x 133 x 1.0 mm (4.5 x 5.25 x .04 in) 5 KP2898-1 • • • •

2450 Inside Clear Cover Lens 98.5 x 66.5 x 1.0 mm (3.88 x 2.62 x .04 in) 5 KP2931-1 • •

1740/1840 Outside Clear Cover Lens Pack 114 x 100 x 1.5 mm (4.5 x 3.94 x .06 in) 5 KP3043-1 • •

3350 Inside Clear Cover Lens 94.7 x 89.7 x 1.0 mm (3.73 x 3.53 x .04 in) 5 KP3044-1 •

1740 Inside Clear Cover Lens Kit 95.9 x 47.2 x 1.00 mm 5 KP3283-1 •

Retaining Frame 2 x 4.25 Frame, 2.5 Mag 1 KP4004-1 •

Cheater Lens 1.00 Mag 2 x 4.25 Frame, 1.0 Mag 1 KP3046-100 • • • • • •

Cheater Lens 1.25 Mag 2 x 4.25 Frame, 1.25 Mag 1 KP3046-125 • • • • • •

Cheater Lens 1.50 Mag 2 x 4.25 Frame, 1.5 Mag 1 KP3046-150 • • • • • •

Cheater Lens 1.75 Mag 2 x 4.25 Frame, 1.75 Mag 1 KP3046-175 • • • • • •

Cheater Lens 2.00 Mag 2 x 4.25 Frame, 2.0 Mag 1 KP3046-200 • • • • • •

Cheater Lens 2.25 Mag 2 x 4.25 Frame, 2.25 Mag 1 KP3046-225 • • • • • •

Cheater Lens 2.50 Mag 2 x 4.25 Frame, 2.5 Mag 1 KP3046-250 • • • • • •

Sweatband N/A 2 KP2930-1 • • • • • •

VIKING Rachet Style Headgear Kit

®
N/A 1 KP4100-1 • • • • • •

VIKING® Pivot Headgear Kit N/A 1 KP3908-1 • • • •

Halo Style Hard Hat Adapter N/A 1 KP3047-1 • • • • • •

VIKING Slotted Hard Hat Adapter

®
NA 1 KP3486-1
2450D Black Replacement Shell N/A 1 S27978-54 •

2450D Outside Cover Lens Seal N/A 1 S27978-58 • •

2450D ADF Holder N/A 1 S27978-55 • •

Black Replacement Shell N/A 1 S27978-31 • • • •

Outside Cover Lens Seal N/A 1 S27978-32 • • • •

ADF Holder N/A 1 S27978-33 • • • •

Black Replacement Shell (matte finish) N/A 1 S27978-95 •

• Compatible

148 | www.lincolnelectric.com/weldinggear
WELDING GEAR

Replacement Parts » VIKING® 3250D FGS™

Package
Product name Qty. Product Number
FGS 3250D- Outside Cover Lens 5 KP3700-1
FGS 3250D- Inside Cover Lens 2 KP3701-1
FGS 3250D- Clear Anti-Fog Grind Shield 1 KP3702-1
FGS 3250D Series ADF Cartridge 1 KP3703-3
FGS 3250D- Replacement Shell (with inside windows) 1 KP3704-1
FGS 3250D- Side Window Covers 2 KP3705-1
FGS 3250D- Headgear 1 KP3706-1
FGS 3250D- Slotted Hard Hat Adapter 1 KP3707-1
FGS 3250D- Halo Style Hard Hat Adapter 1 KP3708-1
Sweatband 2 KP2930-1
Cheater Lens 1.00 MAG 1 KP3046-100
Cheater Lens 1.25 MAG 1 KP3046-125
Cheater Lens 1.50 MAG 1 KP3046-150
Cheater Lens 1.75 MAG 1 KP3046-175
Cheater Lens 2.00 MAG 1 KP3046-200
Cheater Lens 2.25 MAG 1 KP3046-225
Cheater Lens 2.50 MAG 1 KP3046-250
Outside Cover Lens Holder 1 S32652-10
Grind Shield Lens Holder 1 S32652-3
FGS 3250D- Side Lens 2 S32652-5

www.lincolnelectric.com/weldinggear | 149
WELDING GEAR

Replacement Parts » VIKING® 3350 PAPR™

Package
Product Name Dimensions Qty. Product Number
VIKING® 3350 PAPR™ Helmet Assembly (package includes Headgear and Headcovering) N/A 1 K3930-1
Outside Cover Lens 5.25 x 4.5 in 5 KP2898-1
Outside Cover Lens Seal N/A 1 S27978-32
3350 Auto-Darkening Lens N/A 1 KP3045-2
Inside Cover Lens 3.53 x 3.73 in 5 KP3044-1
Lens Holder N/A 1 S27978-33
Headgear (including Plenum and Sweatband) N/A 1 KP3942-1
Sweatband N/A 2 KP3943-1
Headcovering (w/Hook and Loop Attachment) N/A 1 KP3940-1
Blower Assembly (package includes Filter Cover Assembly) N/A 1 KP3944-1
Battery Pack - Standard N/A 1 KP3937-1
Battery Pack - Extended NA 1 KP3938-1
HE Filter Assembly N/A 2 KP3934-2
HE Filter Assembly N/A 6 KP3934-6
Pre-filter N/A 6 KP3935-1
Spark Screen N/A 1 KP3936-1
Battery Charger N/A 1 KP3932-1
PAPR Belt Assembly N/A 1 KP5123-1
Shoulder Strap Assembly N/A 1 KP5124-1
Belt Extension (extends belt to 60 in.) N/A 1 KP3939-1
Hose Assembly with Cover N/A 1 KP5122-1
Cheater Lens 1.00 MAG 2 X 4.25 FRAME, 1.0 MAG 1 KP3046-100
Cheater Lens 1.25 MAG 2 X 4.25 FRAME, 1.25 MAG 1 KP3046-125
Cheater Lens 1.50 MAG 2 X 4.25 FRAME, 1.5 MAG 1 KP3046-150
Cheater Lens 1.75 MAG 2 X 4.25 FRAME, 1.75 MAG 1 KP3046-175
Cheater Lens 2.00 MAG 2 X 4.25 FRAME, 2.0 MAG 1 KP3046-200
Cheater Lens 2.25 MAG 2 X 4.25 FRAME, 2.25 MAG 1 KP3046-225
Cheater Lens 2.50 MAG 2 X 4.25 FRAME, 2.5 MAG 1 KP3046-250
Duffle Bag N/A 1 K3096-1

150 | www.lincolnelectric.com/weldinggear
GUNS AND TORCHES
MAGNUM® PRO GUNS » L-Series • Curve™ Series • Barrel Series • Fume Extraction • Innershield® • Robotic • Spool Guns • Push-Pull

MAGNUM® GUNS » 100 Series • 200 Series • 300 Series • 400 Series • 500 Series

SPECIALIZED GUNS » Submerged Arc • Innershield®

PRO-TORCH™ TIG TORCHES » Air-Cooled • Water-Cooled

GUNS AND TORCHES » MAGNUM® PRO SERIES

Magnum® PRO 100L Gun Processes

and Cable Assembly • MIG
• Flux-Cored
Light and Compact
Standard On:
POWER MIG® 140C
• Ideal for most home, farm and small shop projects, POWER MIG® 180C
auto body work and light maintenance POWER MIG® 180 Dual
or repair applications
• Copper Plus® contact tips extend tip life to lower Literature
overall operational costs E12.31
• Lightweight curved handle provides a comfortable
grip that keeps your hand cool during long welds
• Integrated gun connector is designed for
POWER MIG® wire feeder/welders
Product Product Cable Length Rated Current Duty Cycle (%) Wire Diameter Range
Name Number ft (m) (Amps) (100% CO2 ) in (mm)
Magnum® PRO 100L K3080-1 10 (3.0) 100 40 0.025-0.045 (0.6-1.1)

Magnum® PRO 175L Gun Processes

and Cable Assembly • MIG
• Flux-Cored
Compact and Powerful

• Ideal for most home, farm and small shop projects, Standard On:
as well as auto body work and light maintenance and POWER MIG® 210 MP
repair applications
• Copper Plus® contact tips extend tip life to lower Literature
E12.33
overall operational costs
• Integrated gun connector is designed for
Lincoln Electric POWER MIG® wire feeder/welders
• Rated for higher output
• Includes a gun hanger for storage
Product Product Cable Length Rated Current Duty Cycle (%) Wire Diameter Range
Name Number ft (m) (Amps) (100% CO2 ) in (mm)
Magnum® PRO 175L K4076-1 10 (3.0) 175 40 0.025-0.045 (0.6-1.1)

Magnum® PRO 250L Gun Processes

• MIG
and Cable Assembly • Flux-Cored
Medium Duty MIG Welding Gun
Standard On:
• With sufficient amperage for bigger jobs, the POWER MIG® 256
Magnum® PRO 250L is recommended for medium-duty POWER MIG® 260
job shop and production applications
• High-quality copper expendable parts ensure superior Literature
electrical contact and heat dissipation E12.32

• Chrome plated gun tube for enhanced spatter resistance

• Integrated gun connector is designed for POWER MIG®
wire feeder/welders

Product Product Cable Length Rated Current Duty Cycle (%) Wire Diameter Range
Name Number ft (m) (Amps) (100% CO2 ) in (mm)
Magnum® PRO 250L K3081-2 15 (4.5) 250 40 0.025-0.045 (0.6-1.1)

152 | www.lincolnelectric.com
GUNS AND TORCHES » MAGNUM® PRO CURVE SERIES

Magnum® PRO Curve™ Series Processes

• MIG
Get in Front of the Curve • Pulsed MIG
• Flux-Cored
• Lightweight curved handle provides comfortable grip
• Utilizes Magnum® PRO expendables that increase the
amount of arc-on time
Literature
• Copper Plus® contact tips feature a larger tip diameter E12.05
that expands life and decreases tip changes
• Rotating gun tube reduces fatigue and allows the gun
to fit into tight spaces
• Internal bolted connections and dual trigger leads for
faster repairs and less downtime Shown: Magnum® PRO Curve 300 Series

Product Product Cable Length Rated Current (Amps) Duty Cycle (%) Wire Diameter Range
Name Number ft (m) CO2 /Mixed CO2 /Mixed in (mm)
Magnum® PRO Curve™ 200 Series K2950-1 10 (3.0) 200/150 60/60 0.025-3/64 (0.6-1.2)
K2950-2 15 (4.5)
Ready-Pak® Package K2950-2-10-45(1) 15 (4.5)
Magnum PRO Curve 300 Series
® ™
K2951-1 10 (3.0) 300/200 60/60 0.025-5/64 (0.6-2.0)
K2951-2 15 (4.5)
K2951-3 20 (6.1)
K2951-4 25 (7.6)
Dual Procedure (Switch Control) K3130-1 10 (3.0)
K3130-2 15 (4.5)
K3130-3 20 (6.1)
K3130-4 25 (7.6)
Dual Schedule (Trigger Control) K3092-1 10 (3.0)
K3092-2 15 (4.5)
K3092-3 20 (6.1)
K3092-4 25 (7.6)
Ready Pak® Package K2951-2-6-45(1) 15 (4.5)
K2951-2-10-45(1)
K2951-2-10-116(2)
Magnum® PRO Curve™ 400 Series K2952-1 10 (3.0) 400/400 60/50 0.025-5/64 (0.6-2.0)
K2952-2 15 (4.5)
K2952-3 20 (6.1)
K2952-4 25 (7.6)
Dual Procedure (Switch Control) K3098-1 10 (3.0)
K3098-2 15 (4.5)
K3098-3 20 (6.1)
K3098-4 25 (7.6)
Dual Schedule (Trigger Control) K3093-1 10 (3.0)
K3093-2 15 (4.5)
K3093-3 20 (6.1)
K3093-4 25 (7.6)
Short Neck K3055-1 10 (3.0)
K3055-2 15 (4.5)
K3055-3 20 (6.1)
K3055-4 25 (7.6)
Ready-Pak Package
®
K2952-2-10-45 (1)
15 (4.5)

Includes 0.035-0.045 in. (0.9-1.2 mm) liner and K466-10 Connector Kit.
(1)
www.lincolnelectric.com | 153
Includes 0.052-1/16 in. (1.3-1.6 mm) liner and K466-10 Connector Kit
(2)
GUNS AND TORCHES » MAGNUM® PRO BARREL SERIES

Magnum® PRO Barrel Series Processes

• MIG
Robust Guns Configured for Any Application • Pulsed MIG
• Flux-Cored
• Built for extreme environment welding where
heat-resistance and fast serviceability are key
Literature
• Rated at 100% duty cycle
E12.01
• Utilizes Magnum® PRO expendables that increase
the amount of arc-on time
• Copper Plus® contact tips feature a larger
tip diameter that expands life and decreases
tip changes
• Internal bolted connections and dual trigger
leads for faster repairs and less downtime Shown: Magnum® PRO Barrel 550 Gun

Product Product Cable Length Rated Current (Amps) Duty Cycle (%) Wire Diameter Range
Name Number ft (m) CO2 /Mixed CO2 /Mixed in (mm)
Magnum® PRO Barrel 250 Gun K2651-1 10 (3.0) 250/250 100/100 0.035-5/64 (0.9-2.0)
K2651-2 15 (4.5)
K2651-3 20 (6.1)
K2651-4 25 (7.6)
Ready-Pak Package
®
K2651-2-6-45 (1)
15 (4.5) 0.035-0.045 (0.9-1.2)
Magnum® PRO Barrel 350 Gun K2652-1 10 (3.0) 350/285 100/100 0.035-5/64 (0.9-2.0)
K2652-2 15 (4.5)
K2652-3 20 (6.1)
K2652-4 25 (7.6)
Dual Procedure (Switch Control) K3131-1 10 (3.0)
K3131-2 15 (4.5)
K3131-3 20 (6.1)
K3131-4 25 (7.6)
Dual Schedule (Trigger Control) K3132-1 10 (3.0)
K3132-2 15 (4.5)
K3132-3 20 (6.1)
K3132-4 25 (7.6)
Ready-Pak Package
®
K2652-2-10-45 (1)
15 (4.5) 0.035-0.045 (0.9-1.2)
Magnum® PRO Barrel 450 Gun K2653-1 10 (3.0) 450/325 100/100 0.035-5/64 (0.9-2.0)
K2653-2 15 (4.5)
K2653-3 20 (6.1)
K2653-4 25 (7.6)
Dual Procedure (Switch Control) K3133-1 10 (3.0)
K3133-2 15 (4.5)
K3133-3 20 (6.1)
K3133-4 25 (7.6)
Dual Schedule (Trigger Control) K3134-1 10 (3.0)
K3134-2 15 (4.5)
K3134-3 20 (6.1)
K3134-4 25 (7.6)
Ready-Pak® Package K2653-2-10-45(1) 15 (4.5) 0.035-0.045 (0.9-1.2)

(1)
Includes 0.035-0.045 liner and K466-6 connector kit

154 | www.lincolnelectric.com
GUNS AND TORCHES » MAGNUM® PRO BARREL SERIES and MAGNUM® SERIES

Magnum® PRO Barrel Series, con’t.

Product Product Cable Length Rated Current (Amps) Duty Cycle (%) Wire Diameter Range
Name Number ft (m) CO2 / Mixed CO2 /Mixed in (mm)
Magnum® PRO Barrel 550 Gun K2655-1 10 (3.0) 550/375 100/100 0.035-1/8 (0.9-3.2)
K2655-2 15 (4.5)
K2655-3 20 (6.1)
K2655-4 25 (7.6)
Dual Procedure (Switch Control) K3135-1 10 (3.0) 550/375 100/100 0.035-1/8 (0.9-3.2)
K3135-2 15 (4.5)
K3135-3 20 (6.1)
K3135-4 25 (7.6)
Dual Schedule (Trigger Control) K3136-1 10 (3.0) 550/375 100/100 0.035-1/8 (0.9-3.2)
K3136-2 15 (4.5)
K3136-3 20 (6.1)
K3136-4 25 (7.6)

Magnum® Welding Guns Processes

• MIG
Classic Gas-Shielded Guns • Pulsed MIG
• Flux-Cored

• Comfortable curved handle design

• Available in a number of amperage ranges and
Literature
gun cable lengths E12.10
• Rotating gun tube and gun hanger clip
• Rated at 60% duty cycle

Wire Diameter, in (mm)

Cut 0.025-0.035 (0.6-0.9) 0.035-0.045 (0.9-1.2) 0.052-1/16 (1.3-1.6) 1/16-5/64 (1.6-2.0)
Product Length
Name ft (m) Open- Fast- Package Open- Fast- Package Open-End Fast- Package Open-End Fast- Package
End Mate™ End Mate™ Mate™ Mate™
Magnum® Guns Series
100L 10 (3.0) K530-5 K530-3
(FCAW-SS
only)
K530-6(1)
200 10 (3.0) K497-2
15 (4.5) K497-1 K498-1 K497-21(3)
300 10 (3.0) K470-1
15 (4.5) K470-2 K1802-1(2) K470-4 K470-6
400 10 (3.0) K471-1
Standard
15 (4.5) K471-2 K479-2 K2286-1(2) K471-4 K479-4 K471-22(3) K471-6 K479-6
K471-21(3)
20 (6.1) K471-10 K471-11
25 (7.6) K471-13 K471-14 471-15
400 Dual 15 (4.5) K575-2
Schedule
400 Dual 15 (4.5) K1722-2
Procedure
400 15 (4.5) K541-3
Short Neck
450WC 15 (4.5) K684-12(4) K684-12(4) K684-12(4)
550 15 (4.5) K598-7 K598-11 (5)

Magnum 100L » (1)Includes 4-pin MS-Type connection for trigger control Magnum 400 Standard » (2)Includes K466-1 Connector Kit (3)Includes K466-10 Connector Kit
Magnum 200 » (2)Includes K466-1 Connector Kit Magnum 450WC » (4)0.035-1/16 in. (0.9-1.6 mm) Solid Wire, 0.045-5/64 in. (1.2-2.0 mm) Flux-Cored Wire
Magnum 300 » (3)Includes K466-10 Connector Kit Magnum 550 » (5)600A Open End 5/64-3/32 in. (2.0-2.4 mm) Solid Wire

www.lincolnelectric.com | 155
GUNS AND TORCHES » MAGNUM® PRO SERIES

Magnum® PRO Fume Guns Processes

• MIG
Production-Ready Source Fume Extraction • Pulsed MIG
• Flux-Cored

• Rated at 100% duty cycle

• Innovative strain relief swivels to take pressure off
the operator’s wrist Literature
“- Utilizes Magnum® PRO expendables that increase E12.02
the amount of arc-on time
- Copper Plus® contact tips feature a larger tip
diameter that expands life and decreases tip changes
- Dual trigger leads for faster repairs and less
downtime
• Anti-Seize™ tip and diffuser and Copper Plus® contact
tips improve heat dissipation and increase part
service life
• Select the more compact 350 amp model or the high
amperage 550 amp model for thicker materials

Product Product Cable Length Rated Current (Amps) Duty Cycle (%) Wire Diameter Range
Name Number ft (m) CO2 /Mixed CO2 /Mixed in (mm)
Magnum® PRO Fume Gun 350(1) K2649-1 15 (4.5) 350/285 100/100 0.035-5/64 (0.9-2.0)
Magnum PRO Fume Gun 550
® (1)
K2650-1 15 (4.5) 550/375 100/100 0.035-1/8 (0.9-3.2)

Recommended with X-Tractor® 3A, 5A, and 8A. See Weld Fume Control Section for other Fume Extraction attachments and accessories.
(1)

K126™ PRO Processes

• Flux-Cored Self-Shielded
The Leader in Construction Welding Guns

• Replaceable liner Literature

• Interchangeable gun connectors expand E12.111
compatibility with a wide range of feeders
• Integrated trigger leads in coaxial cable resists
job site abrasion
• Stainless steel gun tube jacket and plated steel
strain relief resist spatter and extend life
• Available with a variety of reverse and
non-reverse gun tube jackets

Product Product Gooseneck Gun Connector Amperage Rating Wire Diameter Range Cable Length
Name Number Angle Power Pin 60% Duty Cycle in (mm) ft (m)
K126™ PRO K126-10 62° Lincoln Electric K613-6 350 0.035-0.120 (0.9-3.0) 10 (3.0)
K126-11 15 (4.5)
K126-12 Tweco #4 K466-10
K126-13 30° Lincoln Electric K613-6

156 | www.lincolnelectric.com
GUNS AND TORCHES

Innershield® Guns Processes

• Flux-Cored Self-Shielded
Classic Flux-Cored Self-Shielded Guns

• A number of models are offered for Literature

amperage ratings from 350 to 600 amps E12.110
• Rated at 60% duty cycle

Feeding Capability – Wire Diameter, in (mm)

Product Rated Current @ Length Tube
Name 60% Duty Cycle ft (m) 0.062 (1.6) 1/16 (1.6) 0.068 (1.7) 0.072 (1.8) 5/64 (2.0) 3/32 (2.4) 7/64 (2.8) 0.120 (3.0) Angle
K126-1 Classic 350A 10 (3.0) • • • • • • 62°
K126-2 Classic 15 (4.5) • • • • • •
K345-10 10 (3.0) • • • 90°
K115-1 450A 10 (3.0) • • 82°
K115-2 15 (4.5) • •
K115-3 10 (3.0) •
K115-4 15 (4.5) •
K115-8 15 (4.5) • • 45°
K115-10 15 (4.5) •
K116-2 600A 15 (4.5) • • Straight

Submerged Arc Guns Processes

• Submerged Arc
For Hand-held Submerged Arc Applications
Literature
• Suitable for 5/64 and 3/32 in. (2.0 and lincolnelectric.com
2.4 mm) wire diameters
• Ideal for submerged arc short welds
or seams with poor fit up best address
by an operator
• Rated 600 amps

Product Product Rated Current Wire Diameter Range Cable Length

Name Number (Amps) in (mm) ft (m)
Submerged Arc Gun K113-1 600 5/64 (2.0) 15 (4.5)
K113-2 600 3/32 (2.4) 15 (4.5)
Mechanized Submerged Arc Gun K114 600 5/64-3/32 (2.0-2.4) 15 (4.5)

www.lincolnelectric.com | 157
GUNS AND TORCHES » MAGNUM® PRO ROBOTIC SERIES

Magnum® PRO Robotic Guns Processes

• MIG
Designed For Long Life. • Pulsed MIG
• Flux-Cored
Hexagon-Shaped Connector Design Ensures Better Electrical Conductivity and Prevents Micro-Arcing:
• Cables exceed industry standards by a factor of two in durability
Literature
• Utilizes Magnum® PRO expendables that increase the amount of arc-on time E12.03
• Extended Life™ contact tips are designed with a chrome zirconium alloy to prevent annealing
and wear
• Gun tube to diffuser interface design helps withstand more accidental crashes than traditional
gun tubes
• Changing between 350A and 550A expendables does not alter the robot TCP, and parts are
interchangeable between all gun models

Shown:
K2917-100iC
(Thru-Arm)

Shown:
K2647-4
(External Dress)

Specifications
Product Wire Diameter Rated Current (Amps) Cable Length
Product Name Number Range : in (mm) @ Duty Cycle (CO2 ) ft. (m)
External Dress Air Cooled
Magnum® PRO Robotic 550 K2647-4 0.035-5/64 550 @ 100% 4 (1.2)
(0.9-2.0)
Magnum® PRO Robotic 550 K2647-4L 4 (1.2)
Magnum® PRO Robotic 550 K2647-5L 5.5 (1.7)
Magnum® PRO Robotic 550 K2647-8 8 (2.4)
Magnum® PRO Robotic 550 K2647-11 11 (3.3)
Thru-Arm Air Cooled (includes Nose Cone, Housing, and Cable Assembly)
Magnum® PRO Thru-Arm Robotic 550 (100iC) K3353-100iC 0.035-5/64 550 @ 100% Predetermined
(0.9-2.0) length per robotic
Magnum® PRO Thru-Arm Robotic 550 (100iC) w/wire brake K3353-100iCW arm selection
Magnum® PRO Thru-Arm Robotic 550 (120iC) K3353-120iC
Magnum PRO Thru-Arm Robotic 550 (120iC) w/wire brake
®
K3353-120iCW
Magnum® PRO Thru-Arm Robotic 550 (100iC/6L) K3353-100iC/6L
Magnum® PRO Thru-Arm Robotic 550 (100iC/6L) w/wire brake K3353-100iC/6LW
Magnum® PRO Thru-Arm Robotic 550 (120iC/10L) K3353-120iC/10L
Magnum® PRO Thru-Arm Robotic 550 (120iC/10L) w/wire brake K3353-120iC/10LW

158 | www.lincolnelectric.com
GUNS AND TORCHES » MAGNUM® PRO ROBOTIC SERIES

Magnum® PRO Robotic Guns

Specifications

Product Wire Diameter Rated Current (Amps) Cable Length

Product Name Number Range : in (mm) @ Duty Cycle (CO2 ) ft. (m)
Thru-Arm Air Cooled Ready-Pak®
Fanuc® 100iC Ready-Pak® K3359-100iC 0.035-5/64 550 @ 100% Predetermined
(0.9-2.0) length per robotic
w/Air Blast K3359-100iCA arm selection
w/Wire Brake K3359-100iCW
Fanuc® 100iC/6L Ready-Pak® K3359-100iC/6L
w/Air Blast K3359-100iC/6LA
w/Wire Brake K3359-100iC/6LW
Fanuc® 100iC/8L Ready-Pak® K3359-100iC/8L
w/Air Blast K3359-100iC/8LA
w/Wire Brake K3359-100iC/8LW
Fanuc® 120iC Ready-Pak® K3359-120iC
w/Air Blast K3359-120iCA
w/Wire Brake K3359-120iCW
Fanuc® 120iC/10L Ready-Pak® K3359-120iC/10L
w/Air Blast K3359-120iC/10LA
w/Wire Brake K3359-120iC/10LW
Fanuc® M710iC/12L Ready-Pak® K3359-M710iC/12L
w/Air Blast K3359-M710iC/12LA
w/Wire Brake K3359-M710iC/12LW
Motoman MA1440 Ready-Pak® K3359-MA1440
w/Air Blast K3359-MA1440A
w/Wire Brake K3359-MA1440W
Motoman MA2010 Ready-Pak® K3359-MA2010
w/Air Blast K3359-MA2010A
w/Wire Brake K3359-MA2010W
ABB IRB1520ID Ready-Pak® K3359-1520ID
w/Air Blast K3359-1520IDA
w/Wire Brake K3359-1520IDW
ABB IRB1600ID Ready-Pak® K3359-1600ID
w/Air Blast K3359-1600IDA
w/Wire Brake K3359-1600IDW
ABB IRB1660ID Ready-Pak® K3359-1660ID
w/Air Blast K3359-1660IDA
w/Wire Brake K3359-1660IDW
ABB IRB2600ID-8/2.0 Ready-Pak® K3359-2600ID-20
w/Air Blast K3359-2600ID-20A
w/Wire Brake K3359-2600ID-20W
ABB IRB2600ID-15/1.85 Ready-Pak® K3359-2600ID-185
w/Air Blast K3359-2600ID-185A
w/Wire Brake K3359-2600ID-185W
KUKA KR6-R1820-HW Ready-Pak® K3359-KR6R1820HW
w/Air Blast K3359-KR6R1820HWA
w/Wire Brake K3359-KR6R1820HWW
KUKA KR8-R1420-HW Ready-Pak® K3359-KR8R1420HW
w/Air Blast K3359-KR8R1420HWA
w/Wire Brake K3359-KR8R1420HWW

www.lincolnelectric.com | 159
GUNS AND TORCHES » SPOOL GUNS / PUSH PULL GUNS

Magnum® PRO 100SG Processes

• MIG
Spool Gun
Precise Feeding Performance
Literature
• Lightweight and easy to use E12.20

• Ergonomic grip and balanced design

• Excellent trigger feedback, even through
a welding glove
• No bulky adapter module required
• Premium Magnum® PRO expendable
gun parts improve heat dissipation
and extend life

Product Product Length Wire Size Range Rated Current/

Name Number ft (m) in (mm) Duty Cycle Machine Adapter
Magnum® PRO 100SG K3269-1 10 (3.0) 0.030-0.035 (0.8-0.9) 130A/30% POWER MIG® 140C None
POWER MIG® 180C
POWER MIG® 180 Dual
POWER MIG® 210 MP
POWER MIG® 216

Magnum® SG Spool Gun Processes

• MIG
Full-Control Wire Feeding

• Large handle and trigger for easy use Literature

with gloved hands E12.22
• Clear spool gun drive cover makes it
easy to check the wire drive path
• Rugged nozzle designed to withstand
harsh industrial environments
• 250 amp rating and generous 25 ft (7.5 m)
gun cable

Product Product Length Wire Size Range Rated Current/

Name Number ft (m) in (mm) Duty Cycle Machine Adapter
Magnum SG Spool Gun
®
K487-25 25 (7.5) .025-3/64 (0.6-1.2) 250A/60% POWER MIG 216
®
K2703-1
POWER MIG® 256 K2445-1

160 | www.lincolnelectric.com
GUNS AND TORCHES » SPOOL GUNS / PUSH PULL GUNS

Magnum® PRO 250LX™ Spool Gun Processes

• MIG
Versatility Without Hassle • Pulsed

• Utilizes Magnum(R) PRO expendables that

increase the amount of arc-on time Literature
E12.29
• Connects easily and effectively to multiple
MIG machines
• Adjust wire speed remotely at the gun for
fewer trips back to the power source
• Tool-less drive roll tension makes fine
adjustments easy

Product Product Length Wire Size Range Rated Current @

Name Number ft (m) in (mm) Duty Cycle Machine Adapter
Magnum PRO 250LX Spool Gun
® ™
K3570-2 25 (7.5) ALUMINUM: MIXED GAS: POWER MIG 256
®
None
.030-3/64 (0.8-1.2) 280A @ 60%
200A @ 100% POWER MIG 260
®
None
STEEL: POWER MIG® 350MP K2703-1
.025-.035 (0.6-0.9)
Power Wave C300
®
K2910-1

Cougar™ Pistol-Grip Air-Cooled Processes

• MIG
Push-Pull Guns • Pulsed MIG
• Flux-Cored
Comfortable Grip. Industrial Performance.

• Fatigue-reducing design is intended for

operators who prefer an upright pistol-grip Literature
• Premium Magnum® PRO expendable gun parts E12.16
improve heat dissipation and extend life
• Tool-less Drive Roll Changes – Our
slip-fit dual-groove drive rolls install
without tools and feature a D-contour
to prevent unwanted spinning

Product Product Current Rated Current Wire Diameter Range Cable Length
Name Number 100% Argon in (mm) ft (m)
Cougar™ Pistol-Grip Air-Cooled Guns
7-pin K2704-2 300A @ 60% Duty Cycle 0.035-1/16 (0.9-1.6) 25 (7.6)
K2704-3 50 (15.2)

www.lincolnelectric.com | 161
GUNS AND TORCHES » PUSH PULL GUNS

Magnum® PRO AL Air-Cooled Processes

• MIG
Push-Pull Guns • Pulsed MIG

Superior Features. Superior Feeding for Aluminum.

Output
• Just remove a single set screw to easily remove the
Quick-Change™ liner
• Uses Magnum® PRO expendables common with Input
all of our other Magnum® PRO MIG guns
• Recessed adjustment dial is located at the bottom
of the handle to prevent a change while welding
Literature
• EZ-Lock™ system allows you to change or rotate E12.14
barrels anytime

Product Product Number Product Number Current Rated Current Wire Diameter Range Cable Length
Name 12-Pin 7-Pin 100% Argon in (mm) ft (m)
Magnum® PRO AL G225A Air-Cooled Guns
Front Trigger K3420-1 K3421-1 225A @ 60% Duty Cycle 0.035-1/16 (0.9-1.6) 15 (4.6)
(Includes Gooseneck KP3380-60 and aluminum and cored wire
3/64 in. 550A Contact Tip) K3420-2 K3421-2 25 (7.6)
K3420-3 K3421-3 35 (10.7)
K3420-4 K3421-4 50 (15.2)
Rear Trigger K3355-1 K3356-1 15 (4.6)
(Includes Gooseneck KP3380-60 and
3/64 in. 550A Contact Tip) K3355-2 K3356-2 25 (7.6)
K3355-3 K3356-3 35 (10.7)
K3355-4 K3356-4 50 (15.2)

Magnum® PRO AL Water-Cooled Processes

• MIG
Push-Pull Guns • Pulsed MIG

Superior Features. Superior Feeding for Aluminum.

Output
• Just remove a single set screw to easily remove the
Quick-Change™ liner
• Uses Magnum® PRO expendables common with Input
all of our other Magnum® PRO MIG guns
• Recessed adjustment dial is located at the bottom
of the handle to prevent a change while welding
Literature
• EZ-Lock™ system allows you to change or rotate E12.14
barrels anytime

Product Product Number Product Number Current Rated Current Wire Diameter Range Cable Length
Name 12-Pin 7-Pin 100% Argon in (mm) ft (m)
Magnum® PRO AL G450W Water-Cooled Guns
Front Trigger K3422-1 K3423-1 450A @ 60% Duty Cycle 0.035-1/16 (0.9-1.6) 15 (4.6)
(Includes Gooseneck KP3381-60 and aluminum and cored wire
3/64 in. 550A Contact Tip) K3422-2 K3423-2 25 (7.6)
K3422-3 K3423-3 35 (10.7)
K3422-4 K3423-4 50 (15.2)
Rear Trigger K3357-1 K3358-1 15 (4.6)
(Includes Gooseneck KP3381-60 and
3/64 in. 550A Contact Tip) K3357-2 K3358-2 25 (7.6)
K3357-3 K3358-3 35 (10.7)
K3357-4 K3358-4 50 (15.2)

162 | www.lincolnelectric.com
GUNS AND TORCHES » PUSH PULL GUNS

Magnum® PRO AL Pistol Grip Processes

• MIG
Push-Pull Guns • Pulsed MIG
(for Aluminum)
A Lightweight Gun for Heavy-Duty
Aluminum Work
Output

• Superior push-pull wire feeding technology –

Reduces friction in the wire feed path, resulting
in smooth feeding and minimizing damage to Input
the wire
Shown:
• Quick-Change Liner – Simply remove the liner K3478-1
nut to easily access the liner
• Magnum® PRO expendables – Utilizes common Literature
expendables with all Magnum® PRO MIG Guns. E12.17
550A expendables are standard with the
Magnum® PRO AL.
Shown:
• Lightweight, ergonomic handle – Intended for K3479-1
heavy duty work but light in weight with a well-
balanced pistol grip to fit in either hand.
• Recessed adjustment dial – Conveniently located
at the rear of the handle to prevent a change
while welding.
• Removable drive roll cover – Easy access to wire
and drive rolls.

Product Product Number Current Rated Current Wire Diameter Range Cable Length
Name 12-Pin 100% Argon in (mm) ft (m)
Magnum® PRO AL Pistol Grip Push-Pull Guns
Pistol Air Model K3478-1 220A @ 60% Duty Cycle 0.035-1/16 15 (4.6)
(0.9-1.6)
K3478-2 Aluminum Wire 25 (7.6)
K3478-3 35 (10.7)
0.035-0.045
Pistol Water Model K3479-1 320A @ 60% Duty Cycle (0.9-1.2) 15 (4.6)
K3479-2 Steel Wire 25 (7.6)

www.lincolnelectric.com | 163
GUNS AND TORCHES » TIG TORCHES

PTA-9 Series Processes

• TIG
Compact Low-Amperage Air-Cooled Torch
Literature
• Great choice for low amperage applications E12.150
• Available as a basic fixed head torch or also with
Ultra-Flex cable for added manueverability
• Rated 125 amps at 60% duty cycle

Product Product Rated Current/ Tungsten Range Length Number

Name Number Duty Cycle in (mm) ft (m) of Cables
Air-Cooled TIG Torches
PTA-9 K1781-1 125A @ 60% 0.020-1/8 (0.5-3.2) 12.5 (3.8) 1
K1781-3 25.0 (7.6)
PTA-9F Ultra-Flex ™
K1781-9 (1)
125A @ 60% 0.020-1/8 (0.5-3.2) 12.5 (3.8) 1

Pre-configured package with K1622-1 Twist Mate™ adapter and 1/16 in. (1.6 mm) gas lens collet body, collet and gas lens installed
(1)

PTA-17 Series Processes

• TIG
Your Go-To Air-Cooled TIG Torch
Literature
• Industrial TIG torch commonly used for a great E12.150
number of applications
• Available in basic fixed head, flexible head, valve,
flex head with valve, and fixed head with
Ultra-Flex™ cable models
• Rated 150 amps at 60% duty cycle

Product Product Rated Current/ Tungsten Range Length Number

Name Number Duty Cycle in (mm) ft (m) of Cables
Air-Cooled TIG Torches
PTA-17 K1782-1 150A @ 60% 0.020-5/32 (0.5-4.0) 12.5 (3.8) 1
K1782-2 12.5 (3.8) 2
K1782-3 25.0 (7.6) 1
K1782-4 25.0 (7.6) 2
PTA-17F K1782-10 150A @ 60% 0.020-5/32 (0.5-4.0) 25.0 (7.6) 1
PTA-17FV K1782-13 150A @ 60% 0.020-5/32 (0.5-4.0) 12.5 (3.8) 1
K1782-11 25.0 (7.6) 1
PTA-17V K1782-6 150A @ 60% 0.020-5/32 (0.5-4.0) 12.5 (3.8) 1
K1782-7 12.5 (3.8) 2
K1782-8 25.0 (7.6) 1
K1782-9 25.0 (7.6) 2
PTA-17 Ultra-Flex™ K1782-12 150A @ 60% 0.020-5/32 (0.5-4.0) 12.5 (3.8) 1
PTA-17F Ultra-Flex™ K1782-15 150A @ 60% 0.020-5/32 (0.5-4.0) 12.5 (3.8) 1
PTA-17F Ultra-Flex™ Ready-Pak®(1) K1782-14

(1)
PTA-17 TIG Torch Ready-Pak® Includes: 150 Amp Air-Cooled Torch Package with Flexible Head and 12.5 ft. (3.8 m) Ultra-Flex™ Cable Assembly with Twist-Mate™ Adapter.
Includes: #7 Nozzle, 1/16 in. (1.6 mm) and 3/32 in. (2.4 mm) Collets, Collet Bodies and E3® Tungsten

164 | www.lincolnelectric.com
GUNS AND TORCHES » TIG TORCHES

PTA-26 Series Processes

• TIG
High Amperage Air-Cooled TIG Torch
Literature
• High amperage air-cooled industrial TIG torch E12.150
typically used for thicker materials
• Available in basic fixed head, flexible head, valve,
and flex head with valve models

Product Product Rated Current/ Tungsten Range Length Number

Name Number Duty Cycle in (mm) ft (m) of Cables
Air-Cooled TIG Torches
PTA-26 K1783-1 200A @ 60% 0.020-5/32 (0.5-4.0) 12.5 (3.8) 1
K1783-2 12.5 (3.8) 2
K1783-3 25.0 (7.6) 1
K1783-4 25.0 (7.6) 2
PTA-26F K1783-10 200A @ 60% 0.020-5/32 (0.5-4.0) 25.0 (7.6) 1
PTA-26FV K1783-11 200A @ 60% 0.020-5/32 (0.5-4.0) 12.5 (3.8) 1
25.0 (7.6) 1
PTA-26V K1783-7 200A @ 60% 0.020-5/32 (0.5-4.0) 12.5 (3.8) 2
K1783-8 25.0 (7.6) 1
K1783-9 25.0 (7.6) 2

PTW-20 Processes
• TIG
Premium Water-Cooled TIG Torch
for Most Applications Literature
E12.150
• Rugged high amperage TIG torch intended for
industrial production environments
• Comfortable knurled handle provides a
non-slip sure grip for precise control

Product Product Rated Current/ Tungsten Range Length Number

Name Number Duty Cycle in (mm) ft (m) of Cables
Water-Cooled TIG Torches
PTW-20 K1784-3 250A @ 100% 0.020-1/8 (0.5-3.2) 12.5 (3.8) 3
K1784-4 25.0 (7.6)

PTW-18 Processes
• TIG
Premium High Amperage
Water-Cooled TIG Torch Literature
E12.150
• Rugged high amperage TIG torch intended
for industrial production environments
• Comfortable knurled handle provides a
non-slip sure grip for precise control

Product Product Rated Current/ Tungsten Range Length Number

Name Number Duty Cycle in (mm) ft (m) of Cables
Water-Cooled TIG Torches
PTW-18 K1784-1 350A @ 100% 0.020-5/32 (0.5-4.0) 12.5 (3.8) 3
K1784-2 25.0 (7.6)

www.lincolnelectric.com | 165
GUNS AND TORCHES » TIG TORCHES

20H-320-25R Processes
• TIG
Premium High Amperage Water-Cooled
TIG Torch Package Literature
E12.150
• Rugged high amperage TIG torch intended for
industrial production environments
• Comfortable knurled handle provides a
non-slip sure grip for precise control
• 320 Amps of capacity through industry
standard 20 series front end torch design
• Includes premium cable cover

Product Product Rated Current/ Tungsten Range Length Number

Name Number Duty Cycle in (mm) ft (m) of Cables
20H-320-25R K4168-2 320A @ 100% 0.020-1/8 (0.5-3.2) 25 (7.6) 3

166 | www.lincolnelectric.com
GUNS AND TORCHES » TIG TORCHES

Specifications Chart
Pro-Torch™ TIG Torches Adapters
Model Adapter
Product No.
For Precision TIG® 275 and 375 Power Sources
PTA-26, 26V, 26F, 26FV K2166-1
(one-piece power cable)
PTA-9, 9F, 17F, 17V, 17FV K2166-3
(one-piece power cable)
PTA-17V,-26V (one-piece power cable) K2166-2
PTW-18, 20 and 20H-320 None required
For Power Sources with 1/2 in Output Terminals (including TIG Module)
PTW-18, 20 and 20H-320 K2505-2, K1622-4
PTA-26, 26F, 26V, 26FV (one-piece cable) K2505-2, K1622-3
PTA-9 (one-piece cable) K2505-2, K1622-1
PTA-17V, 26V (two-piece cable) None required
For Square Wave TIG 175, Square Wave TIG 200, Precision TIG 225, Invertec V160-T, Aspect 375 and Power Sources with Twist Mate™ Receptacle (w/Gas Pass Through)
® ® ® ® ®

PTA-9, -9F, 17, 17F, 17V, 17FV K1622-1

(one-piece cable)
PTW-18, 20 and 20H-320 K1622-4, K1622-5(1)
PTA-26, 26V, 26F, 26FV (one-piece cable) K1622-3
For Power Sources with Tweco-Style Output Terminal and Separate Gas
PTW-18, 20, 20H-320 K1622-6
PTA-17V, 17VF (one-piece cable) K960-4
PTA-26V, 26FV (one-piece cable) K960-3
For Power MIG 210 MP and Power Sources with Twist Mate Receptacle and Separate Gas
® ™

PTA-17V, 17FV (one-piece cable) K960-1

For Invertec V155-S and Power Sources with Small Twist Mate Receptacle and Separate Gas
® ™

PTA-17V, 17FV (one-piece cable) K960-2

Recommended for the Aspect® 375

(1)

www.lincolnelectric.com | 167
CUTTING SYSTEMS
HAND-HELD PLASMA CUTTERS » Tomahawk® 375 Air • Tomahawk® 625 • Tomahawk® 1000 • Tomahawk® 1500

CNC PLASMA CUTTING SYSTEMS » FlexCut® 80 • FlexCut® 125 • Torchmate® 4400/4800 • Torchmate® X Series • Torchmate® 5100 •
Spirit® II High Definition Plasma Cutting Systems • Burny® Shape Cutting Controllers • Software and Accessories for CNC Cutting Systems

CNC TUBE & PIPE CUTTING SYSTEMS » MASTERPIPE® Compact Profiler • MASTERPIPE® Profiler
ROBOTIC CNC STRUCTURAL STEEL PLASMA CUTTING SYSTEM » PythonX® II
CUTTING SYSTEMS

Tomahawk® 375 Air Processes

• Plasma Cutting
Plasma Cutting with Built-In Air
Output
• Rated for up to 3/8 in. (9.5 mm) max cuts
• Internal air compressor enables operation in
environments where external compressed air is Input
not available
• Extremely portable at only 40 lbs. (18 kg)
• Touch Start™ system delivers reliable plasma arc
initiation without high frequency
Literature
• Front panel purge control makes it easy to set E11.100
the air flow rate without initiating the plasma arc

Product Product Input Power Rated Output: Current/ Input Current @ Output Air Pressure Air Flow HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range Required Rate in (mm) lb (kg)
Tomahawk® K2806-1 208/230/1/60 13A @ 85.2V 100% 21.7A 10-25A 80-110 PSI 70 psi @ 15.2 x 8.5 x 18.9 40
375 Air 18A @ 87.2V 60% (6.0-7.5 Bar) 125-200 SCFH (385 x 215 x 480) (18)
25A @ 90V 35% Pilot Current: 5 Bar @
17A 80L/min

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Tomahawk® 625 Processes

• Plasma Cutting
Plasma Cutting that Gets Around
Output
• Rated for up to 5/8 in. (15.9 mm) max cuts
• Efficient electrode and nozzle design save
money in the long run Input
• Compatible with Lincoln Electric Ranger® or
Vantage® engine drives
• Touch Start™ system delivers reliable plasma
arc initiation without high frequency
Literature
• Front panel purge control makes it easy to E11.200
set the air flow rate without initiating the
plasma arc

Product Product Input Power Rated Output: Current/ Input Current @ Output Air Pressure Air Flow HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range Required Rate in (mm) lb (kg)
Tomahawk® 625 K2807-1 208/230/1/50/60 24A @ 89.6V 100% 36.8A 10-40A 80-110 PSI 70 psi @ 15.2 x 8.5 x 18.9 34
w/Hand Torch 29A @ 91.8V 60% (6.0-7.5 Bar) 125-200 SCFH (385 x 215 x 480) (15.4)
40A @ 96.0V 35% Pilot Current: 5 Bar @
17A 80L/min

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/plasma | 169
CUTTING SYSTEMS

Tomahawk® 1000 Processes

• Plasma Cutting
Plasma Cutting for Production Capacity
Output
• Rated for up to 1 in. (25.4 mm) max cuts
• Touch Start™ system assures reliable arc
initiation without generating disruptive Input
high-frequency radio waves
• Front panel purge control makes it easy
to set the air flow rate without initiating
the plasma arc
Literature
E11.300

Product Product Input Power Rated Output: Current/ Input Current @ Output Air Pressure Air Flow HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range Required Rate in (mm) lb (kg)
Tomahawk® K2808-1 208-575/1/3/50/60 40A @ 96V 100% 37.8 20-60A 87-109 PSI 80 psi @ 15.2 x 8.5 x 22.1 45
1000 60A @ 104V 50% (Max.) (6.0-7.5 Bar) 275 SCFH (385 x 215 x 561) (20.4)
w/Hand 5.5 Bar @ ( without
Torch Pilot Current: 130L/min. torch )
20A

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Tomahawk® 1500 Processes

• Plasma Cutting
Heavy-Duty, 100 Amps, 60% Duty Cycle • Gouging

• Hand held cutting up to 1 1/4 in (31.75 mm) Output

• Virtually dross-free cuts reduce parts clean-up
• Reliable arc starting without high frequency
Input
• PowerConnect® Technology for automatic
voltage sensing

Literature
E11.400

Product Product Input Power Rated Output: Current/ Input Current @ Output Gas Pressure Gas Flow HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range Required Rate in (mm) lb (kg)
Tomahawk® K2809-1 200-208/230/380/ 60A/140V/100% 3PH/100% : 5-100A 87 to 109 PSI 380 SCFH 17.9 x 11.8 x 25.4 96
1500 460/575/3/50/60 31/28/16/14/12 (6.0-7.5 Bar) @ 80 PSI (455 x 301 x 645) (44)
80A/140V/80% 3PH/80% :
41/37/21/18/14 180 SLPM
100A/140V/60% 3PH/60% @ 5.5 Bar
49/43/27/22/18
230/1/50/60 60A/140V/100% 1PH/100% : 48 25-80A
80A/140V/80% 1PH/80% : 62

200-208/1/50/60 60A/140V/100% 1PH/100% : 52

80A/140V/60% 1PH/60% : 71

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

170 | www.lincolnelectric.com/plasma
DESIGN | CUT | WELD

Now you can have all the tools you need to make your fabrication projects come to life—from one brand.
The new Torchmate® 4400 and 4800 cutting tables give you to 65% faster cut speeds, improved cut quality,
and exceptional repeatability.

© Lincoln Global, Inc. All Rights Reserved. www.lincolnelectric.com

CUTTING SYSTEMS

Torchmate® 4400 | 4800 Processes

• Plasma Cutting
4x4 and 4x8 CNC Plasma Cutting Tables • Plasma Marking

• Exceptional repeatability and performance

• Rapid delivery and set-up time Literature
torchmate.com
• Produces up to 65% faster cut speeds
• Standard FlexCut® 80 mechanized plasma
cutter already included
• Optional FlexCut® 125 mechanized plasma
cutter available as substitute
• Optional CE certified model available

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

FlexCut® 80 Processes
• Plasma Cutting
Heavy-Duty, 80 Amps, 80% Duty Cycle • Gouging

• Mechanized piercing up to 3/4 in. (19mm) Cutting Type

• Maximize productivity with up to 65% faster cut • Mechanized Cutting
• Hand Cutting
speeds with less bevel than the competition
• Up to three times longer consumable life
Output
• Reliable arc starting without high frequency
• For mechanized and hand held applications
Input

Literature
E11.315

Product Product Input Power Rated Output: Current/ Input Current @ Output Gas Pressure Gas Flow HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range Required Rate in (mm) lb (kg)
FlexCut® 80 K4809-1 200-208/230/380/ 60A/140V/100% 3-Ph/100% 25-80A 87-109 PSI 380 SCFH 17.9 x 11.8 x 25.4 96
460/575/3/50/60 31/28/16/14/12 (6.0-7.5 Bar) @ 80 psi (455 x 301 x 645) (44)
180 SLPM
80A/140V/80% 3-Ph/80% @ 5.5 Bar
41/37/21/18/14
230/1/50/60 60A/140V/100% 1-Ph/100%
80A/140V/80% 48
1-Ph/80%
62
200-208/1/50/60 60A/140V/100% 1-Ph/100%
80A/140V/60% 52
1-Ph/60%
71

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

172 | www.lincolnelectric.com/plasma
CUTTING SYSTEMS

FlexCut® 125 Processes

• Plasma Cutting
Make the Cut with Speed and Power • Plasma Marking

• Mechanized piercing of 1 in. (25mm) Cutting Type

• Plasma cutting, gouging and marking capabilities • Mechanized Cutting

• Up to 6 times longer consumable life

Output
• Reliable arc starting without high frequency

Input

Literature
E11.320

Product Product Input Power Rated Output: Current/ Input Current @ Output Air Pressure Air Flow HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range Required Rate in (mm) lb (kg)
FlexCut® 125 K4811-1 380/400/415/460/ 125A/175V/100% 3-Ph/100% 3-Ph 90-120 PSI 550 SCFH 20.72 x 12.25 x 25.53 118
575/3/50/60 40/40//40/33/28 20-125A (6.21-8.27 Bar) @ 90 psi (526 x 311 x 648) (53.5)

(260 SLPM
@ 6.21 Bar)

NOTE: FlexCut™ 125 only available with the purchase of Torchmate® 4400/4800

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Torchmate® X Series Processes

• Plasma Cutting
Light Industrial Cutting Table Systems • Oxyfuel Cutting
• Plasma Marking
• Plate Marking
• 5,500lb fully assembled
water table
Input
• Supports up to 4” mild
steel plate
• Pneumatically controlled
water level
• Holds three tools (plasma, Literature
torchmate.com
oxy-fuel, and plate marker)
• Table sizes available from
5x10 to 8x22

Product Cutting Area(1) Input Power(2) Traverse Speed(2) Cut Speed(2)(3) Machine Resolution Machine Size (footprint) Net Wt.
Name ft (m) amps/volts ipm (m/min) ipm (m/min) in (µm) in (mm) lb (kg)
TM X Series® 5 x 10 15A/110V up to 500 up to 500 0.0004 92.2 x 154.4 Approx.
5X10 Table (1.5 x 3.0) (12.7) (12.7) (10.16) (2,341.9 x 3,921.8) 5900
(2,676)
TMX-HD 6X10 Table 6 x 10 10A/220V up to 550 104.2 x 154.4 Approx.
(1.8 x 3.0) (13.97) (2,646.7 x 3,921.8) 7,000
Single tool 20A/110V (3,175)

(1)
With specific Tool Set (some restrictions apply). (2)
Multiple control platforms. (3)
Cut speeds dependant on process.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/plasma | 173
CUTTING SYSTEMS

Torchmate® 5100 Processes

• Plasma Cutting
Industrial CNC Plasma Table • Oxyfuel Cutting
• Plasma Marking
• Plate Marking
• Complete 5x10 Industrial • Bevel
CNC Plasma Table
• Integrated Down Draft
or Water Table Input
• DXF & DWG Importer
(use with any CAD)
• Onboard CAD/CAM with
Irregular Part Nesting Literature
• Optional ±50° Bevel torchmate.com
Cutting Head

Product Cutting Area(1) Input Power Traverse Speed(2) Cut Speed(2) Machine Size (footprint) Net Wt.
Name ft (m) amps/volts ipm (m/min) ipm (m/min) in (mm) lb (kg)
Torchmate® 5100 5 x 10 15A/110V up to 1,500 up to 1,500 113.5 x 166 Approx.
(1.5 x 3.0) (38.1) (38.1) (2,882 x 4216) 6600
All tools (2,993)

(1)
With specific tool set (some restrictions apply). (2)
Cut speeds dependant on process.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Spirit® ll FineLine® High-Definition Processes

• Plasma Cutting
Plasma Cutting Systems and INOVA® • Plasma Marking

Torch Height Controls

Output
Precise Cuts for Downstream-Ready Production

• Spirit® II series plasma cutting power sources

provide exceptional pierce, cut and marking Input
capabilities with high definition edge quality
of 2 degrees or less of cut edge bevel
• INOVA® torch height control systems allow you to
Literature
program more functions, set tighter parameters E15.16 (Spirit® II 150)
and get better resolution. INOVA® reduces cycle E15.15 (Spirit® II 275)
time and gives you a more accurate cut.The INOVA® E15.14 (Spirit® II 400)
includes a fully programmable microcontroller,
complete with interfacing for 8 torch stations.

Product Product Input Power: Rated Output(1): Mild Steel Production Max. Thickness, in (mm) Gas Supply: Plasma/ HxWxD Net Wt.
Name Number Volts/Amps Current/Duty Cycle Capacity, in (mm) (edge start w/dross) Shield/Marking in (mm) lb (kg)
Spirit® ll 150 See 208 150A DC @ 100% 1.25 (32.0) 1.5 (38.0) O2 / O2 / Ar 38.4 x 29.0 x 43.2 953
w/ built-in Literature 220 (975 x 737 x 1097) (432)
INOVA® 240 O2 / Air / Ar
380
Spirit ll 275
®
400 275A DC @ 100% 1.5 (38.0) 2.5 (65.0) Air / Air / Ar 38.4 x 29.0 x 43.2 1270
w/ built-in 415 (975 x 737 x 1097) (576)
INOVA® 440 Air / N2 / Ar
480
Spirit ll 400
®
600 400A DC @ 100% 2.0 (50.0) 3.0 (75.0) H17(2) / N2 / Ar 39.9 x 34.2 x 49.5 1922
w/ built in (1013 x 869 x 1257) (872)
INOVA®

(1)
@ 104°F (40°C) (2)
H17=50% N2 , 32.5% Ar , 17.5% H2

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

174 | www.lincolnelectric.com/plasma
CUTTING SYSTEMS

Burny® Shape Cutting Controllers Processes

• Plasma Cutting
Advanced Motion Control • Oxyfuel Cutting
• Plasma Marking
• Plate Marking
• Phantom® II and Phantom® ST II shape cutting
controllers feature an intuitive touchscreen
display and the ability to control 2 plasma Output
stations, 6 oxyfuel stations, 1 marker and
multiple auxiliary functions
• Burny® 10LCD Plus controllers are designed Input
for multiple axis cutting machines. Industrial
grade shape cutting controller designed
to operate in factory environments where
temperature and humidity extremes, metal
Literature
dust, RF radiation, vibration and constant E15.45 (Phantom® II)
machine movement are commonplace. E15.46 (Phantom® ST II)
E15.40 (Burny® 10LCD Plus™)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

Software and Accessories for Literature

torchmate.com
CNC Cutting Systems
Programs and Peripheral Equipment
to Augment and Enhance Your
Cutting Processes

• Torch height control, oxyfuel accessories, plate

marking systems, appropriate computers and
torch holders
• Training is available at our site or yours to be
sure your team understands how to operate and
maintain your system
• New ACCUMOVE® driver software makes fast
work of part set up, and our compatibility with a
number of CAD-CAM programs allows accurate
file imports

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/plasma | 175
CUTTING SYSTEMS

MASTERPIPE® Compact Profiler Processes

• Plasma Cutting
Economical CNC Pipe Cutting Solution
Input
• Two-axis pipe cutting and profiling with outside
diameter limits of 1-8 in. (25-203 mm) pipe and
tube. Supports pipes and tubes up to 25 ft (7.6 m)
long and 1,000 lbs (454 kg) in weight
• One button moves the torch carriage so Literature
material can be safely loaded and positioned vernontool.com
for cutting and unloading
• An included Arc Voltage Height Control provides
consistent plasma cut quality and arc length
for cleaner cuts on tube and pipe that may
be out of round

Product Input Power Pipe Capacity: Pipe Capacity: Cutting Speed(1) HxWxD Net Wt.
Name Voltage/Phase/Hertz Diameter, in (mm) Weight, lb (kg) ipm (m/min) ft (m) lb (kg)
MASTERPIPE® Compact Profiler 120/1/60 OD: 1.0-8.0 1000 (453.59) max. 200 (5.1) max. 52 x 28 x 92 1000
Base 15 or 25 ft. Section (25.4-203.2) (15.85 x 8.53 x 28.04) (453.6)
(recommended 700 lb/ft
Base 15 or 25 ft. Expansion production) (317.5 kg/m) 37 x 23 x 63 Dependent on
(11.28 x 7.01 x 19.20) Configuration

(1)
Dependent on system configuration and material being cut.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

MASTERPIPE® Profiler Processes

• Plasma Cutting
Automated Pipe Profiling and Cutting • Oxyfuel Cutting

for Industrial Applications

Input
• Ideal for process and power piping, mechanical and
HVAC contracting, shipbuilding, offshore, structural
pipe trusses and pressure vessel fabrication
• Servo-driven systems convey pipe from raw
material storage racks to the cutting head, Literature
vernontool.com
allowing our cutting process to precisely profile
the pipe and convey the finshed pieces to a separate
rack for offloading
• Reusable part-cutting programs are created at the machine,
remote PC or from popular 3D pipe modeling programs
• Unlike chucking machines, the MPM fully supports the pipe
and its remnant offering safe, simple operation and more
efficient material handling

Product Input Power Pipe Capacity: Pipe Capacity: Cutting Speed(1) HxWxD Net Wt.
Name Voltage/Phase/Hertz Diameter, in (mm) Weight, lb (kg) ipm (m/min) ft (m) lb (kg)
MASTERPIPE® Profiler 480/3/60 OD: 2-60 in. 50,000 (22,680) max. 200 (5.1) max. 6 x 12 x 4 Depends on the
(51-1,524) (1.83 x 3.66 x 1.22) configuration
1,500 lb/ft max
Length up to: (2,232 kg/m)
40 ft (12.2 m)
(1)
Dependent on system configuration and material being cut.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

176 | www.lincolnelectric.com/plasma
CUTTING SYSTEMS

PythonX® II Processes
• Plasma Cutting
Robotic CNC Plasma Cutting System
for Structural Steel Fabrication Output

• All-in-one system that replaces several

traditional machines that automates
Input
multiple structural steel fabrication
processes using only a fraction of the
floorspace
• Cuts are completed in only a fraction
of traditional processing time Literature
pythonx.com
• Simple to use with One Operator and
Zero Programming
• Eliminates shop errors from drawing
interpretation and manual cutting
operations
• Reduces material handling
• Best in class cut quality and accuracy
• 4 week delivery
• 3 Year warranty
• 24/7 access to support specialists

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/plasma | 177
PythonX® ll
Complete Structural Steel Fabrication System

PythonX® II is the workhorse of strucutral steel fabrication as it replaces several traditional

machines and delivers a complete solution with unmatched cut quality and accuracy that ensures
your competitive advantage by making you the leanest manufacturer and lowest cost producer
while significantly increasing the capacity of your shop.

For more information on this revolutionary technology visit: www.pythonx.com

AR17-17 ©2017 Lincoln Global, Inc. All Rights Reserved. www.lincolnelectric.com/education

CUTTING SYSTEMS

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

Tomahawk® 375 Air Tomahawk® 1500

Base Model (K2806-1) Base Model (K2809-1)
• Internal air compressor (external air • Work Clamp and Cable
connection also standard) • Air Regulator and Pressure Gage
• LC25 Torch with 10 ft. (3.0 m) cable • Input Power Cord
• Air regulator and pressure gauge
• Internal water separator One-Pak® Package (K3477-1)
• Work clamp and cable • Everything listed for base model (K2809-1)
• Spare consumables • LC105 Hand Torch 25 ft. (7.6 m) (K2849-1)
• Shoulder strap • Consumable starter kit
• Input power cord
One-Pak® Package (K3477-2)
• Everything listed for base model (K2809-1)
• LC105 Hand Torch 50 ft. (15.2 m) cable
Tomahawk® 625 • Consumable starter kit
Base Model (K2807-1)
• LC40 Hand Torch, 20 ft. (6.0 m) cable
• Air regulator and pressure gauge
• Internal water separator Torchmate® 4400|4800
• Work clamp and cable Includes
• Spare consumables · Fully assembled dual-tool CNC plasma cutting
• Shoulder strap table with full 4x4 or 4x8 tool reach
• Input power cord · FlexCut® 80 plasma cutter
· Water table fume extraction
· Arc-voltage digital height control
· Industrial touch screen HMI
Tomahawk® 1000 · Pre-installed Torchmate CAD/CAM
design software
Hand Torch Base Model (K2808-1)
· Consumable starter kit
• LC65 Hand Torch with 25 ft. (7.5 m) cable
• Input power cord
• Air regulator and pressure gauge
• Internal water separator
• Work clamp and cable
• Spare consumables
• Input power cord

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/plasma | 179
CUTTING SYSTEMS

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

FlexCut® 80
Base Model (K4809-1)
• Air regulator and pressure gauge
• Internal water separator
• Work clamp and cable
• Input power cord

One-Pak® Package (K4139-3)

• Everything listed for base model (K4809-1)
• Consumable Starter Kit
• LC105M Machine Torch w/25 ft. (7.6 m)
Lead Cable (K2849-3)

One-Pak® Package (K4139-4)

• Everything listed for base model (K4809-1)
• Consumable Starter Kit
• LC105M Machine Torch w/50 ft. (15.2 m)
Lead Cable (K2849-4)

FlexCut® 125
Base Model (K4811-1)
• Air regulator and pressure gauge
• Internal water separator
• Work clamp and cable
• Input power cord

One-Pak® Package (K4327-3)

• Everything listed for base model (K4811-1)
• Consumable Starter Kit
• LC125M Machine Torch w/25 ft. (7.6 m) Lead Cable
(K4300-4)

One-Pak® Package (K4327-4)

• Everything listed for base model (K4811-1)
• Consumable Starter Kit
• LC125M Machine Torch with 50 ft. (15.2 m) Lead
Cable (K4300-5)

One-Pak® Package (K4327-5)

• Everything listed for base model (K4811-1)
• Consumable Starter Kit
• LC125M Machine Torch with 75 ft. (22.9 m) Lead
Cable (K4300-6)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

180 | www.lincolnelectric.com/plasma
CUTTING SYSTEMS

Accessories » Tomahawk® Plasma Cutters

Tomahawk® 375 Air

Tomahawk® 375 Air

Tomahawk® 1000

Tomahawk® 1500

Tomahawk® 1500
Tomahawk® 1000
Tomahawk® 625

Tomahawk® 625
Base Model
Base Model

Base Model

Base Model

Base Model
Base Model

Base Model

Base Model
Hand Torch

Hand Torch

Hand Torch

Hand Torch

Hand Torch

Hand Torch
K2809-1

K2809-1
K2806-1

K2806-1
K2808-1

K2808-1
K2807-1

K2807-1
Product Name Product No. Product Name Product No.
EXPENDABLE PARTS – STANDARD CUTTING GENERAL
Electrode (LC25) KP2842-1 • Plasma Circle Cutting Guide Kit K2886-1 • • •

Nozzle, 25A (LC25) KP2842-2 • Canvas Cover K2377-1 • • •

Retaining Cap (LC25) KP2842-3 • Accessory Bag K3071-1 • • •

Swirl Ring (LC25, LC40) KP2842-4 • LC25 Handheld Plasma Torch, K2846-1 •
10 ft. (3.0 m)
Spacer (LC25) KP2842-5 •
LC40 Handheld Plasma Torch, K2847-1 •
Electrode (LC40) KP2843-1 •
20 ft. (6.1 m)
Nozzle, 40A (LC40) KP2843-2 •
LC40 Machine Plasma Torch, K2847-2 •
20 ft. (6.1 m)
Swirl Ring (LC25, LC40) KP2842-4 •

Torchmate® 2X2™ CNC Prototyping K3128-1

Retaining Cap (LC40) KP2843-5 •
System/Tomahawk® 625 One-Pak®
•

Spacer (LC40, LC65) KP2843-10 • •

LC65 Handheld Plasma Torch, K2848-1 •
Electrode (LC65) KP2844-1 • 25 ft. (7.5 m)

Nozzle, 40A (LC65) KP2844-2 • LC65 Handheld Plasma Torch, K2848-2 •

50 ft. (15 m)
Nozzle, 50A (LC65) KP2844-3 •
LC65M Machine Plasma Torch, K2848-3 •
Nozzle, 60A (LC65) KP2844-4 • 25 ft. (7.5 m)
Retaining Cap, 40, 60A (LC65) KP2844-9 • EXPENDABLE PARTS – HAND CUTTING
Shield, 40, 60A (LC65M) KP2844-13 • Electrode (LC105) KP4141-1 •

Swirl Ring, 40A, 50A, 60A (LC65) KP2844-14 • Nozzle, 40A (LC105) KP4141-4 •

EXPENDABLE PARTS – CONTACT CUTTING Nozzle, 60A (LC105) KP4141-5 •

Nozzle (Direct Contact), 25A (LC40) KP2843-9 • Nozzle, 80A (LC105) KP4141-6 •

Nozzle (Direct Contact), 40A (LC40) KP2843-3 • Nozzle, 100A (LC105) KP4141-7 •

Swirl Ring, 40A, 50A, 60A (LC65) KP2844-14 • Swirl Ring (LC105) KP4141-9 •

Nozzle (Direct Contact), 40A (LC65) KP2844-5 • Retaining Cap (Contact) (LC105) KP4141-8 •

Retaining Cap, 40, 60A (LC65) KP2844-9 • Drag Shield Cap, 40A (LC105) KP4141-14 •

Nozzle (Shielded Contact), 50A (LC65) KP2844-6 • Drag Shield Cap, 60-80A (LC105) KP4141-15 •

Nozzle (Shielded Contact), 60A (LC65) KP2844-7 • Drag Shield Cap, 100A (LC105) KP4141-16 •

Retaining Cap (Shielded Contact) (LC65) KP2844-10 • Gouging Nozzle, 80A (LC105) KP4141-18 •

Shield, 50A, 60A (LC65) KP2844-11 • Gouging Nozzle, 100A (LC105) KP4141-19 •

EXPENDABLE PARTS – GOUGING Gouging Shield Cap, 80-100A (LC105) KP4141-17 •

Nozzle (Gouging) (LC40) KP2843-4 •

Retaining Cap (Gouging) (LC40) KP2843-6 •

Gouge Shield (LC40) KP2843-8 •

Swirl Ring, 40A, 50A, 60A (LC65) KP2844-14 •

Nozzle (Gouging) (LC65) KP2844-8 •

Retaining Cap (Shielded Contact) (LC65) KP2844-10 •

Gouge Shield (LC65) KP2844-12 •

• Optional

www.lincolnelectric.com/plasma | 181
CUTTING SYSTEMS

Accessories » FlexCut™ Plasma Cutters

Machine Torch FlexCut 125

Machine Torch FlexCut 125

Machine Torch FlexCut 80

Machine Torch FlexCut 80

™

™
Base Model

Base Model

Base Model

Base Model
K4809-1

K4809-1
K4811-1

K4811-1
Product Name Product No. Product Name Product No.
EXPENDABLE PARTS – MACHINE CUTTING GENERAL
Electrode (LC105M) BK12849-1 • LC105 Handheld Plasma Torch, 25 ft. (7.5 m) K2849-1 •

Shield Cap, 40A (LC105M) BK12849-13 • LC105 Handheld Plasma Torch, 50 ft. (15 m) K2849-2 •

Shield Cap, 60A-80A (LC105M) BK12849-2 • LC105M Machine Plasma Torch, 25 ft. (7.5 m) K2849-3 •

Nozzle, 40A (LC105M) BK12849-4 • LC105M Machine Plasma Torch, 50 ft. (15 m) K2849-4 •

Nozzle, 60A (LC105M) BK12849-5 • LC125M Machine Plasma Torch, 25 ft. (7.5 m) K4300-4 •

Nozzle, 80A (LC105M) BK12849-6 • LC125M Machine Plasma Torch, 50 ft. (15 m) K4300-5 •

Retaining Cap (LC105M) BK12849-8 • LC125M Machine Plasma Torch, 75 ft. (22.5 m K4300-6 •

Swirl Ring (LC105M) BK12849-9 •

Retaining Cap (Contact-CTP) (LC105M) BK12849-10 •

Nozzle, Precision Cut (LC105M) BK12849-11 •

Shield Cap, Precision Cut (LC105M) BK12849-12 •

Electrode (LC125M) BK14300-1 •

Shield Cap, 45A-65A (LC125M) BK14300-3 •

Shield Cap, 85A-105A-125A (LC125M) BK14300-4 •

Nozzle, 45A (LC125M) BK14300-7 •

Nozzle, 65A (LC125M) BK14300-8 •

Nozzle, 85A (LC125M) BK14300-9 •

Nozzle, 105A (LC125M) BK14300-10 •

Nozzle, 125A (LC125M) BK14300-11 •

Swirl Ring LC125M) BK14300-13 •

Retaining Cap (LC125M) BK14300-14 •

Retaining Cap, CTP (LC125M) BK14300-15 •

Front Isolator Assembly (LC125M) BK14300-18 •

EXPENDABLE PARTS – HAND CUTTING

Electrode (LC105) KP4141-1 •

Nozzle, 40A (LC105) KP4141-4 •

Nozzle, 60A (LC105) KP4141-5 •

Nozzle, 80A (LC105) KP4141-6 •

Swirl Ring (LC105) KP4141-9 •

Retaining Cap (Contact) (LC105) KP4141-8 •

Drag Shield Cap, 40A (LC105) KP4141-14 •

Drag Shield Cap, 60-80A (LC105) KP4141-15 •

Gouging Shield Cap, 80-100A (LC105) KP4141-17 •

Gouging Nozzle, 80A (LC105) KP4141-18 •

• Optional

182 | www.lincolnelectric.com/plasma
CUTTING SYSTEMS

Accessories » Spirit® II Plasma Cutting Power Sources

Spirit® ll 400
Spirit® ll 150

Spirit® ll 275
See Lit. for Base Model

See Lit. for Base Model

See Lit. for Base Model

K-number

K-number

K-number
Product Name Product No.
EXPENDABLE PARTS – SHIELD CAP
Shield Cap, 30A (Mild Steel, Aluminum) BK277145 • • •

Shield Cap, 50A (Mild Steel) BK277115 • • •

Shield Cap, 50A (Aluminum), 70A (Mild Steel, Stainless Steel-Air, Stainless Steel-H17, Aluminum) BK277150 • • •

Shield Cap, 100A (Mild Steel, Stainless Steel-Air, Aluminum) BK277286 • • •

Shield Cap, 150A (Mild Steel, Stainless Steel-Air, Aluminum) BK277117 • • •

Shield Cap, 30A (Stainless Steel-Air) BK277144 • • •

Shield Cap, 50A (Stainless Steel-Air) BK277149 • • •

Shield Cap, 100A (Stainless Steel-H17) BK277146 • • •

Shield Cap, 150A (Stainless Steel-H17 BK277298 • • •

EXPENDABLE PARTS – INNER RETAINING CAP

Inner Retaining Cap, 30A-70A (Mild Steel, Aluminum), 70A (Stainless Steel-Air) BK277153 • • •

Inner Retaining Cap, 100A (Mild Steel, Stainless Steel-Air, Aluminum) BK277151 • • •

Inner Retaining Cap, 150A (Mild Steel, Stainless Steel-Air, Aluminum) BK277152 • • •

Inner Retaining Cap, 150A (Stainless Steel-H17), 200A/275A (Mild Steel, Stainless Steel-Air, Stainless Steel-H17, Aluminum) BK277266 • • •

Inner Retaining Cap, 30A/50A (Stainless Steel-Air) BK277110 • • •

EXPENDABLE PARTS – NOZZLE

Nozzle, 30A (Mild Steel, Aluminum) BK277120 • • •

Nozzle, 50A (Mild Steel, Aluminum) BK277122 • • •

Nozzle, 70A (Mild Steel, Stainless Steel-Air, Aluminum) BK277125 • • •

Nozzle, 100A (Mild Steel, Stainless Steel-Air, Aluminum) BK277284 • • •

Nozzle, 150A (Mild Steel, Stainless Steel-Air, Aluminum) BK277293 • • •

Nozzle (for Silver), 100A (Mild Steel, Stainless Steel-Air, Aluminum) BK279484 • • •

Nozzle (for Silver), 150A (Mild Steel, Stainless Steel-Air, Aluminum) BK279493 • • •

Nozzle, 30A (Stainless Steel-Air) Stainless Steel (Air) BK277121 • • •

Nozzle, 50A (Stainless Steel-Air) Stainless Steel (Air) BK277123 • • •

Nozzle, 70A (Stainless Steel-H17) Stainless Steel (H17) BK277124 • • •

Nozzle, 100A (Stainless Steel-H17) Stainless Steel (H17) BK277126 • • •

Nozzle, 150A (Stainless Steel-H17) Stainless Steel (H17) BK277297 • • •

EXPENDABLE PARTS – SWIRL RING

Swirl Ring, 30A (Aluminum), 30A/50A (Mild Steel), 70A (Stainless Steel-H17 BK277140 • • •

Swirl Ring, 50A/70A (Mild Steel, Stainless Steel-Air, Aluminum BK277142 • • •

Swirl Ring, 100A (Mild Steel, Stainless Steel-Air, Aluminum BK277283 • • •

Swirl Ring (for Silver), 100A (Mild Steel, Stainless Steel-Air, Aluminum) BK279483 • • •

Swirl Ring (for Silver), 150A (Mild Steel, Stainless Steel-Air, Aluminum) BK279439 • • •

Swirl Ring, 150A (Mild Steel, Stainless Steel-Air, Stainless Steel-H17, Aluminum), 260A (Stainless Steel-H17) BK277139 • • •

Swirl Ring, 30A (Stainless Steel-Air) Stainless Steel (Air) BK277138 • • •

Swirl Ring, 100A (Stainless Steel-H17) Stainless Steel (H17) BK277141 • • •

• Optional www.lincolnelectric.com/plasma | 183

WIRE DELIVERY
BULK PAKAGE EQUIPMENT » Drum and Box Heads • Drum and Box Covers • Drum, Reel Box Handling Equipment

CONDUIT » Weld Wire Conduit • Conduit Connectors • Conduit Hangers, Clamps, Sleeves

DISPENSING EQUIPMENT » Wire Feed Assist • Bulk Reel Dispensing • Wire Straightners • Infinity-Pak

ROBOTIC TORCH MAINTENANCE » Power Ream®

WIRE DELIVERY TOOLS » Wire Level Gauge • Accessories

WIRE DELIVERY

Bulk Package Hoods and Processes

• MIG
Accessories for Drums and Boxes • Flux-Cored
Coverage for Consumables

• Tough polyethylene construction for

long shop life
• Dual windows for easy operator access
• Available for round, square and
octagon-shaped packages

Drum and Box Covers Processes

• MIG
Bulk Package Protection • Flux-Cored

• Tough, fire-resistant PVC construction

• Provides effective protection of fiber
or cardboard drums located near the
weld cell
• Available for round, square and
octagon-shaped bulk wire packages

Drum, Reel and Box Processes

• MIG
Handling Equipment • Flux-cored
Packages on the Move

• Dollies available for drum or boxes with

up to 1000 lb (453 kg) capacity
• Staging carts available for drums or reels
with up to 1000 lb (453 kg) capacity
• Variety of lifters for chimeless and
chimed drums

www.lincolnelectric.com | 185
WIRE DELIVERY

Weld Wire Conduit Processes

• MIG
Wire Delivery at any Length • Flux-cored
• Submerged Arc
• Choose from polymer or extra flexible material
• Available in pre-cut lengths up to 30 ft.
(9.1 m) or in bulk
• Self-threading or compression style
connectors available

Conduit Connectors Processes

• MIG
Make the Welding Connection • Flux-cored
• Submerged Arc
• Variety of types and sizes available
• Rounded internal shoulders for smooth
wire feeding
• Union kits and bulkhead connector

Conduit Hangers, Processes

• MIG
Clamps and Sleeves • Flux-cored
• Submerged Arc
Wire Support

• Hanger prevents excessive sag in

conduit to existing structures
• Sleeves protect conduit from
operating environment
• Use clamps to secure conduit to
existing structures

186 | www.lincolnelectric.com
WIRE DELIVERY

Wire Feed Assist Processes

• MIG
Extra Drive for Your Wire Feed • Flux-Cored

• Reduces pulling force required from

Input
feed motor
Compressed Shop Air
• Enables longer conduit runs
• Adjustable torque setting prevents
bird nesting
• For .035-1/8 in. (0.9-3.2 mm)
wire diameters

Wire Straighteners Processes

• MIG
Get It Straight • Flux-cored
• Submerged Arc
• Straighten or recast all types of wires
• Lightweight, yet rugged
• Equipped with locating calibration on
face of unit and fine adjustment scale
on tension knob

Dispensing Equipment Processes

• MIG
for Bulk Reels • Flux-Cored
The Reel Deal

• Universal base plate design fits wood

or plastic reels with 1-5/16 in. (33 mm)
or 5 in. (127 mm) center arbors
• Twin locking cams secure base plate
to reel for stability
• Smooth acceleration and deceleration
of feed arm

www.lincolnelectric.com | 187
WIRE DELIVERY

Infinity-Pak® Dispensing System Processes

• MIG
Continuous Wire, Continuous Welding
Output
• Butt welding and flash removal process
take only seconds
• Configurations for every environment, including Input
2-station, 4-station and wall mount
• ASTM certified and the bulk package is
100% recyclable
Literature
• Use with a variety of Lincoln Electric MC14-97
SuperArc® wire alloys

Product Product Input Power Input Air Pressure Input Current @ Input HxWxD Net Wt.
Name Number Voltage/Phase/Hertz and Flow Rated Output Current in (mm) lb (kg)
Infinity-Pak® K3924-1 110V — — — 42 x 20 x 24 100
Butt Welder 5 Amps (1067 x 208 x 610) (43.4)
Butt Welder and K3921-1 — —
Docking Station
With 2 Stations K3926-1
With 4 Stations K3927-1
Wall Mount K4106-1

Power REAM® Processes

• MIG
Torch Maintenance System
Eliminate Torch Spatter Input

• Removes and reduces spatter

accumulation on robotic torches
for improved welding performance
• Simple push-button “No Error” Product Number
programming technique K2391-1 (Base Model)

• Only reamer to offer an automatic

retry feature
Literature
E10.110

Product Product Input Power Input Air Pressure Input Current @ Input HxWxD Net Wt.
Name Number Voltage/Phase/Hertz and Flow Rated Output Current in (mm) lb (kg)
Power REAM® K2391-1 24V DC 80 PSI 1100 rpm 0.50A DC with reservoir 62
15 SCFM 0.65 HP 24.9 x 8.9 x 13.2 (28)
(633 x 228 x 337)

without reservoir
19.5 x 8.9 x 13.2
(495 x 228 x 337)

188 | www.lincolnelectric.com
WIRE DELIVERY

Wire Level Gauge Processes

• MIG
Keep an Eye on Wire Supply • Flux-Cored

• Detects level of wire remaining in the

drum or box
• Wire level displayed visually with color and
percentage scale
• Useable with 500 lb. (227 kg) or 1000 lb.
(453 kg) package

Wire Delivery Accessories Processes

• MIG
Additional Tools • Flux-cored
• Submerged Arc
• Draw gauge accurately measures the draw
weight of welding wire pulling through conduit
in English or metric at the touch of a button
• Nozzle cleaning tool removes spatter; choice
of five sizes
• Conduit cutter trims all diameters of polymer
conduit with ease

www.lincolnelectric.com | 189
High Speed, Low Porosity.
Process Z for zinc-coated materials.

When it comes to welding zinc-coated materials for the automotive industry,

you’re often forced to make hard choices between reducing spatter, increasing
weld speed or minimizing porosity. Process Z™ gives you all three, without forcing
you to compromise. Get better, faster, higher quality welds with Process Z.
To find out more, visit us at www.lincolnelectric.com

AR15-20 ©2015 Lincoln Global, Inc. All Rights Reserved.

WIRE DELIVERY

Accessories » Infinity-Pak®

Infinity-Pak® with 4 Stations

Infinity-Pak® with 2 Stations

Infinity-Pak® Wall Mount

K3926-1

K4106-1
K3927-1
Product Name Product No.
GENERAL
Wire Sizer with 0.035 in (0.9 mm) dies K3910-1 • • •

Wire Sizer replacement dies for 0.035 in (0.9 mm) wire K3911-1 • • •

Wire Sizer with 0.045 in (1.2 mm) dies K3913-1 • • •

Wire Sizer replacement dies for 0.045 in (1.2 mm) wire K3912-1 • • •

Wire Sizer with 0.052 in (1.3 mm) dies K3914-1 • • •

Wire Sizer replacement dies for 0.052 in (1.3 mm) wire K3915-1 • • •

Wire Sizer with 0.062 in (1.6 mm) dies K3917-1 • • •

Wire Sizer replacement dies for 0.062 in (1.6 mm) wire K3918-1 • • •

Wire Sizer with 0.078 in (2.0 mm) dies K3919-1 • • •

Wire Sizer replacement dies for 0.078in (2.0 mm) wire K3920-1 • • •

Butt welder and docking station combination K3921-1 • • •

Butt welder (110V) portable K3924-1 • • •

Hood Cover K3997-1 • • •

• Optional

www.lincolnelectric.com | 191
AUTOMATION SOLUTIONS
CUTTING » Flat and Plate • Tube and Plate • Structural • Stamping and Forming • Tooling • Positioning Equipment

WELDING » Mechanized • Robotic • Orbital • Laser • System Integration • Environmental Systems

AUTOMATION SOLUTIONS

Cutting
Lincoln Electric’s cutting systems produce superior
cuts at lower operating costs. The range of
solutions, including plasma cutters and oxy fuel
systems, cut any shape, including flat plate, tube
and pipe, and structural. Our cutting systems
are used in numerous industries and by home
hobbyists and in a variety of applications.

Stamping and Metal Forming

Lincoln Electric has an extensive depth of
experience in stamping and metal forming,
integrating and supporting all brands of
equipment. We offer servo transfer systems of
various sizes and configurations, blank stacking
and de-stacking solutions for pre- and post-press
applications, press-to-press automation, and
robotic solutions.

Tooling
Complete in-house designs of machining and
fabricating systems are available. Our turnkey
systems come with full robot programing and
can be integrated into your processes. The
broad product offering is used for automotive
components, heavy equipment and general
fabrication, and in the manufacture of large
components.

www.lincolnelectric.com/automation | 193
COMPLETE SOLUTION | ONE SOURCE

When it comes to mechanized welding, why not get every part of the solution from one source?
Pantheon™ Submerged Arc Welding Manipulators are designed by Lincoln Electric.
When combined with Lincoln Electric welding consumables, technical expertise and
local support, you will have a complete solution with one company to count on.

©2017 Lincoln Global, Inc. All Rights Reserved.

AUTOMATION SOLUTIONS

Positioning Equipment
We custom-design a variety of positioners,
conveyors and gantry systems for many
applications. Our deep understanding of kinematics
helps us develop a total solution for manufacturing
and fabricating operations. Our post-installation
support delivers optimal service.

Mechanized Welding
We offer single and multiple arc systems. Our
completely integrated mechanized systems handle
incoming and outgoing materials that require
submerged arc and open arc welding. Components
of our mechanized systems include:
• Systems and Manipulators
• Seam Tracker™ Systems
• Jaw chucks
• Motorized and manual slides
• Pipe support stands
• Turning and idle rolls
• Accessories

Orbital Welding
Lincoln Electric has a full range of robustly
designed TIG and MIG flux-cored orbital
welding solutions, along with specially designed
consumables. Our solutions’ modular systems
provide maximum flexibility and asset utilization.
The system provides:
• Industry-leading welding performance
• Software solutions for data collection and
field service
• Improved system serviceability
• Support

www.lincolnelectric.com/automation | 195
AUTOMATION SOLUTIONS

Robotic Welding
With in-depth knowledge of all welding process
and applications, Lincoln Electric has engineered
and installed thousands of robotic welding
systems. These robotic welding solutions allow
manufactures to weld simple to complex parts
with a high degree of repeatability and efficiency.
• Fab-Pak® and Pro-Pak® robotic welding systems
have pre-established critical dimensions and are
available in a variety of configurations.
• Custom systems are uniquely designed and
fully automated for virtually any welding
process or application.

Laser Welding
We have a unique understanding on a range of
laser processes, including laser cutting, autogenous
laser welding, hybrid laser arc welding, laser hot
wire cladding, and laser brazing. We have deep
relationships with the expert resources in laser
manufacturing, optics component assembly and
research laboratories.

196 | www.lincolnelectric.com/automation
AUTOMATION SOLUTIONS

System Integration
Lincoln Electric is your single point of contact
for system design development. Our dedicated
project managers will deliver a comprehensive
turnkey system thanks to experienced designers,
programmers and technicians, as well as
extensive manufacturing capabilities. Our in-
house engineering and development teams
provide process development, tool and controls
design, simulation services, and PLC and robot
system programming. We ensure success by
understanding the customer’s facility and
requirements, managing changes and becoming
an extension of the customer’s launch team.

Environmental Solutions
Welding is a safe occupation when sufficient
measures are taken to protect fabricators from
potential hazards. We offer a range of stand-alone
and facility solutions to achieve this goal, including:
• Portable and stationary fume extraction units
• Extraction arms and hoods
• Downdraft tables
• Engineered control systems
• Guardian™ Fire Safety System
• Fume guns
We can integrate our environmental solutions
with other automation products.

www.lincolnelectric.com/automation | 197
AUTOMATION SOLUTIONS

Robotic Welding Power Sources Processes

• TIG
Power Wave® Welding Power Sources • Pulsed TIG
• MIG
Specifically Designed For Robotic Systems • Pulsed MIG
• Flux-Cored
• Built-in wire feeder control
• ArcLink® communication protocol communicates
with robotic arm controller Output
• Standard suite of software solutions, including
CheckPoint™ and Power Wave® Manager
• High-performance pulse wave forms, including Input
RapidArc®, Precision Pulse™, Pulse-on-Pulse™
and others
• Flexibility to add or connect modules, fume
control, water coolers, computers or other Literature
accessories E10.11 (Power Wave® i400)
E5.171 (Power Wave® R450)
E5.120 (Power Wave® S700)

Shown: Power Wave® R450

Product Product Input Power Rated Output(2): Current/ Input Current @ Output HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range in (mm) lb (kg)
Power Wave® i400 K2669-1 200-208/230/308-415/460/ 350A/31.5V/100% 4037/21/18/15A 5-420A 22.7 x 24.4 x 21.5 209
575/3/50/60 400A/34V60% 50/45/26/23/18A 10-37V (577 x 620 x 546) (95)
420A/35V/40% 54/49/28/25/20A
( 308-415/3/50/60
w/CE Filter Kit installed )(1)
Power Wave® R450 K3451-1 208/230/308-415/460/ GMAW: 3-Ph/40% Duty Cycle: 5-550A 22.5 x 14 x 24.8 150
Base Model 575/3/50/60 550A/41.5V/40% 80/73/41/37/29A (571 x 355 x 630) (68)
450A/36.5V/100%
with Wireless K3451-2 3-Ph/100% Duty Cycle:
Connectivity Module GTAW-DC: 60/54/30/27/21A
550A/32V/40%
450A/28V/100%
Power Wave® S700 K3279-1(3) 380-415/440-460/500/ 700A/44V/100% 55/46/42/38A 20-900A 30.1 x 19.1 x 36.7 385
575/3/50/60 (900A/44/60%) (74/60/56/49A) (765 x 485 x 932) (175)
AutoDrive® 19 K3004-2 40V DC/1.0A NA NA NA 8.8 x 10.4 x 3.1 7
(224 x 264 x 80) (3.2)
AutoDrive® 19 K3171-1 40V DC/1.0A NA NA NA 8.8 x 10.4 x 3.1 7
Tandem (224 x 264 x 80) (3.2)

Power Wave i400 » (1)CE compliance is provided with a CE Filter Kit. Input voltage is limited to 380-415/3/50/60 with kit installed. (2)No derating for CV versus Pulse modes.
Power Wave S700 » (3)Internal filter is required to meet CE conducted emission requirements. K2444-4 CE Filter Module must be used with K3279-1.

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

198 | www.lincolnelectric.com/automation
AUTOMATION SOLUTIONS

Robotic Welding Wire Feeders Processes

• MIG
Optimized for Robotics, Extremely • Pulsed MIG
• MIG-STT®
Compact and Lightweight • Flux-Cored
• Metal-Cored
• AutoDrive® S, steel servo torch solution with
touch-retract starting technology, provides
Output
precise arc starts for a consistent bead profile
and minimal post-weld clean-up
• AutoDrive® SA, push-pull servo torch solution
Input
with touch-retract start technology, initiates
each robotic aluminum weld with no spatter
or burnback
• Select the 4R220 for feeding larger diameter
wires, or pulling through long conduits Literature
E10.17 (AutoDrive® S)(1)
• MAXTRAC wire drives feature precision cast
®
E10.16 (AutoDrive® SA)(1)
components, tool-less drive roll changes, and
E10.12 (AutoDrive®
brass-to-brass gun connections 4R100 and 4R220)
• Available modules relay wire feed commands E10.15 (Power Feed® 10R)
from an appropriate, non-robotic Power Wave®
power source to any AutoDrive® robotic
wire feeder (1)
The AutoDrive® S and SA
is compatible only with
Magnum® PRO products.

Product Product Wire Feed Speed Wire Size Range – Solid Wire Size Range – Cored HxWxD Net Wt.
Name Number Range: ipm (m/min) in (mm) in (mm) in (mm) lb (kg)
AutoDrive® S K4303-1 30-800 (0.8-20.3) 0.035-0.045 (0.9-1.2) NA 7.0 x 7.5 x 10.8 14.5
(177.8 x 190.5 x 274.3) (6.58)
AutoDrive® SA K4129-1 30-800 (0.8-20.3) 0.035-1/16 (0.9-1.6) NA 10.8 x 7.5 x 7.0 14.5
(aluminum only) (274.3 x 190.5 x 177.8) (6.58)
K4128-5 —
(torch)
AutoDrive® 4R100 K3560-1 50-800 (1.3-20.3) 0.023-0.045 (0.6-1.2) 0.035-0.045 (0.9-1.2) 8.4 x 7.5 x 8.1 13.2
(213 x 191 x 231) (6.0)
AutoDrive® 4R220 K3561-1 30-1200 (0.8-30.5) 0.023-1/16 (0.6-1.6) 0.035-5/64 (0.9-2.0) 10.43 x 10.07 x 9.92 20.9
(265 x 256 x 252) (9.5)
Power Feed® 10R K1780-3 50-800 (1.3-20.3) 0.025-3/32 (0.6-2.4) 0.035-0.120 (0.9-3.0) 8.9 x 12.0 x 9.9 22.4
75-1200 (2.0-30.5) 0.025-1/16 (0.6-1.6) 0.035-5/64 (0.9-2.0) (226 x 306 x 251) (10.2)

WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

www.lincolnelectric.com/automation | 199
WELD FUME CONTROL
MODEL FILTER PROCESS INPUT FEATURES

Single Arm System

Volts/Phase/Hertz

Start/Stop Sensor

Dual Arm System

Filter Indicator
Size: ft 2 (m2)

Flux-Cored
System

Mobile

Gauge
Stick

MIG
TIG

PORTABLE
120/1/50/60
Miniflex® Disposable 118 (11) 230/1/50/60 • • • •
120/1/50/60
X-Tractor® 1GC Self-Cleaning 30 (2.8) 230/1/50/60 • • •
115/1/60
Mobiflex® 100-NF Non-Filtration — 230/1/50 • •
MOBILE
115/1/50/60
Mobiflex® 200-M Disposable 538 (50) 230/1/50 • • •
115/1/50/6
Mobiflex® 400-MS Self-Cleaning 325 (30) 230/1/50 • • •
STATIONARY
230/3/60
X-Tractor® 3A, 5A, 8A Self-Cleaning up to 108 (10) 460/3/60
Statiflex® 200-M Disposable 538 (50) — • • •
Statiflex 400-MS
®
Self-Cleaning 325 (30) — • •
Statiflex® 800 Self-Cleaning 568 [52] — • •
DownFlex® 100-NF Non-Filtration — — •
DownFlex® 200-M Disposable 560 (52) 208-230/460/3/60 •
optional
DownFlex 400-MS/A
®
Self-Cleaning 560 (52) 208-230/460/3/60 • •
ROBOTIC SYSTEMS » Formed Extraction Hood
ENGINEERED SYSTEMS » Modular Extraction Hood • Statiflex® Filter Banks • Statiflex® Complete Filter Banks • Prism™ Filter Banks •
The Circulator® • Push/Pull Systems • High and Low Vacuum Central Systems
FIRE SAFETY » Guardian™ Fire Safety Solutions

KEY: Excellent Good Optional

WELD FUME CONTROL

Miniflex® Processes
• Stick (light duty)
Industry-Leading Portability and Ease of Use • TIG
• MIG
• Flux-Cored (light duty)
• High vacuum system designed for confined and
hard-to-reach spaces
Input
• Ideal for light duty welding applications
• Start/Stop sensor reduces energy consumption
• Quick and easy filter replacement and
maintenance
Literature
E13.11

• 3-Year Warranty
• Made in the USA of
US and foreign content
Shown: Miniflex® One-Pak® Package (K4260-2)

Product Product Input Power Input Current @ Sound Air Flow Power Filter Surface Area HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Rated Output Level CFM Rating HP ft2 (m2) in (mm) lb (kg)
Miniflex® K3972-3 120/1/50/60 12.0A 80 dBA H : 108 2.4 118 29 x 15.6 x 16.8 40
Base Unit L : 95 (1.2/motor) (11) (736 x 396 x 427) (18.1)
K2497-18 230/1/50/60 7.5A
One-Pak Pkg. K4260-2 120/1/50/60 12.0A 41
(18.6)

X-Tractor® 1GC Processes

• Stick
Move It Where You Need It • TIG
• MIG
• Flux-Cored
• Intended for light duty welding in small
shops, maintenance applications and for
home/hobby projects Input

• Rotary air jet filter cleaning system

• Reduces filter change-over and overall costs
• Quiet operation at <74 dBA
Literature
• Automatic Stop/Start provides extraction E13.17
only when needed

Product Product Input Power Input Current @ Filter Type/ Air Flow HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Rated Output Filter Size, ft2 (m2) CFM in (mm) lb (kg)
X-Tractor® 1GC K652-1 120/1/50/60 15A 30.1 (2.8) H : 115 13.4 x 26.8 x 15.8 37
Base Model L : 55 (340 x 680 x 400) (17)
K652-2 230/1/50/60 9A
One-Pak® Pkg. K4260-4 120/1/50/60 15A 49
(22.2)

www.lincolnweldfumecontrol.com | 201
WELD FUME CONTROL

Mobiflex® 100-NF Processes

• Stick
Fume Doesn’t Stand A Chance • TIG
• MIG
• Flux-Cored
• Ideal for construction sites or applications where
fume removal does not require filtration Input
• Weighs only 37.5 lbs. (17 kg)
• Low 69 dB(A) noise level
Literature
• Maximum 32 ft. (9.8 m) reach distance with Hood E13.42
and Hose Set and Extension Hose Set Shown:
Mobiflex® 100-NF One-Pak® Pkg. • 3-Year Warranty

Product Product Input Power Input Current @ Filter Type/ Air Flow HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Rated Output Filter Size, ft2 (m2) CFM in (mm) lb (kg)
Mobiflex® 100-NF K1666-3 115/1/60 10A No Filtration, Exhaust Only Up to 765 23.1 x 18.9 x 18.6 37.5
Base Model depending (587 x 480 x 472) (17)
K2497-11 230/1/50 5A on length of
hose(s) used

One-Pak® Pkg. K4260-3 115/1/60 10A 78

(35.3)

Mobiflex® 200-M Processes

• Stick
Fume Doesn’t Stand A Chance • TIG
• MIG
• Flux-Cored
• Filter status indicator monitors the amount of
particulate in the filter cartridge to alert the Input
user for filter replacement
• Generous airflow (735 CFM with LFA 3.1/4.1
extraction arm) and large filter capacity
[538 ft2 (50 m2)] Literature
E13.21
• Choose from two arm lengths 10 ft (3.0 m) and
13 ft (4.0 m) or select a hose/hood set
• Manual or optional automatic on/off • 3-Year Warranty
(arc sensor) operation • Made in the USA of
Shown:
Mobiflex® 200-M US and foreign content
w/LFA 4.1 Arm & Arc Sensor/Lamp Kit
One-Pak® Pkg.

Product Product Input Power Input Current @ Filter Type/ Air Flow HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Rated Output Filter Size, ft2 (m2) CFM in (mm) lb (kg)
Mobiflex® 200-M K1653-4 120/1/60 6.1A Cellulose/ 735 36 x 32 x 48 200 (90.7)
MERV 14 Filter Base Unit 538 (50) (900 x 810 x 1210)
w/LFA 3.1 10 ft. Arm One-Pak® Pkg. K4259-2 233 (105.7)
w/LFA 3.1 10 ft. Arm & Arc Sensor/Lamp Kit K4259-3
One-Pak® Pkg.
w/LFA 4.1 13 ft. Arm One-Pak® Pkg. K4259-4 237 (107.5)
w/LFA 4.1 13 ft. Arm & Arc Sensor/Lamp Kit K4259-5 238 (108.0)
One-Pak® Pkg.
MERV 14 Filter Base Unit Export K2497-12 230/1/50 3.7A 204 (92.5)
Mobiflex 200-M
®
K1653-5 115/1/60 7.6A High-Efficiency 735 36 x 32 x 48 209 (94.8)
MERV 16 Filter Base Unit Cellulose-Polyester/ (900 x 810 x 1210)
538 (50)
w/LFA 3.1 10 ft. Arm One-Pak® Pkg. K4259-6 242 (109.8)
w/LFA 3.1 10 ft. Arm & Arc Sensor/Lamp Kit K4259-7 243 (110.2)
One-Pak® Pkg.
w/LFA 4.1 13 ft. Arm One-Pak® Pkg. K4259-8 246 (111.6)
w/LFA 4.1 13 ft. Arm & Arc Sensor/Lamp Kit K4259-9 247 (112.0)
One-Pak® Pkg.

202 | www.lincolnweldfumecontrol.com
WELD FUME CONTROL

Mobiflex® 400-MS Processes

• Stick
Mobile Self-Cleaning • TIG
• MIG
Fume Extraction System • Flux-Cored

• Automatic cleaning system simplifies filter maintenance Input

• Filter status indicator monitors amount of particulate in filter
cartridge to alert the user for filter maintenance or replacement
Literature
• Generous airflow (735 CFM with LFA 3.1/4.1 extraction arm) and large E13.21
filter capacity [325 ft2 (30 m2)]
• Choose from two arm lengths 10 ft (3.0 m) and 13 ft (4.0 m) or select
• 3-Year Warranty
a hose/hood set
• Made in the USA of
• Manual or optional automatic on/off (arc sensor) operation US and foreign content

Product Product Input Power Input Current @ Filter Type/ Air Flow HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Rated Output Filter Size, ft2 (m2) CFM in (mm) lb (kg)
Mobiflex® 400-MS K1741-3 115/1/60 7.6A Cellulose/ 735 40 x 32 x 48 220
MERV 14 Filter Base Unit 325 (30) (1020 x 810 x 1210) (99.7)
w/LFA 3.1 10 ft. Arm One-Pak® Pkg. K4384-1 253 (114.7)
w/LFA 3.1 10 ft. Arm and Arc Sensor/ K4384-2 254 (115.2)
Lamp Kit One-Pak® Pkg.
w/LFA 4.1 13 ft. Arm One-Pak® Pkg. K4384-3 257 (116.5)
w/LFA 4.1 13 ft. Arm and Arc Sensor/ K4384-4 258 (117)
Lamp Kit One-Pak® Pkg.
with MERV 14 Filter Base Unit Export K2497-14 230/1/50 3.8A 224 (101.6)
with MERV 16 Filter Base Unit K1741-4 115/1/60 7.6A High-Efficiency 735 40 x 32 x 48 229 (103.8)
Cellulose-Polyester/ (1020 x 810 x 1210)
w/LFA 3.1 10 ft. Arm One-Pak Pkg.
®
K4384-5 325 (30) 262 (118.8)
w/LFA 3.1 10 ft. Arm and Arc Sensor/ K4384-6 263 (119.2)
Lamp Kit One-Pak® Pkg.
w/LFA 4.1 13 ft. Arm One-Pak® Pkg. K4384-7 266 (120.6)
w/LFA 4.1 13 ft. Arm and Arc Sensor/ K4384-8 267 (121.11)
Lamp Kit One-Pak® Pkg.

X-Tractor® Stationary Systems Processes

• Stick
Heavy Duty Multi-Arc Fume Extraction • TIG
• MIG
• Flux-Cored
• These high vacuum systems are ideal for
use with multiple nozzles and fume guns
Input
• An integrated automatic filter cleaning
system simplifies maintenance

Literature
MC14-44

Product Product Input Power Input Current @ Filter Type/ Air Flow HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Rated Output Filter Size, ft2 (m2) CFM in (mm) lb (kg)
X-Tractor® 3A K3965-1 230/3/60 10.3A Polyester-based/ 165 29.1 x 16.9 x 43.3 192
30.1 (2.8) (740 x 430 x 1100) (87)
K3965-2 460/3/60 6.0A
X-Tractor® 5A K3966-1 230/3/60 18A Polyester-based/ 285 33.1 x 28.0 x 55.1 242
53.82 (5) (840 x 710 x 1400) (110)
K3966-2 460/3/60 10A
X-Tractor® 8A K3967-1 230/3/60 37A Polyester-based/ 475 43.3 x 28.0 x 55.1 309
107.64 (10) (1100 x 710 x 1400) (140)
K3967-2 460/3/60 20A

www.lincolnweldfumecontrol.com | 203
WELD FUME CONTROL

Statiflex® 200-M Processes

• Stick (light duty)
Convenient Wall-Mounted System • TIG
• MIG
• Flux-Cored (light duty)
• Intended for facilities with fixed work
stations and little available floor space
Literature
• Designed for light to medium fume E13.14
extraction and filtration
• Generous airflow up to 735 CFM
with LFA 3.1 or 4.1 extraction
arms and SF2400 fan • 3-Year Warranty
• Large filter capacity • Made in the USA of
[538 ft2 (50 m2)] increases US and foreign content
efficiency, filter life and Shown:
reduces operational costs Single Arm Base Unit

Product Product Input Power Input Current @ Filter Type/ Air Flow HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Rated Output Filter Size, ft2 (m2) CFM in (mm) lb (kg)
Statiflex® 200-M K1654-4 N/A N/A Cellulose/ 735 36 x 32 x 28 90
MERV 14 Filter Base Unit Single Arm 538 (50) (900 x 810 x 730) (41)
w/LFA 3.1 10 ft. Single Arm One-Pak® K4261-2 115/1/60
Pkg.
w/LFA 3.1 10 ft. Single Arm & Arc Sensor/ K4261-6
Lamp Kit One-Pak® Pkg.
w/LFA 4.1 13 ft. Single Arm One-Pak® Pkg. K4261-3
w/LTA 2.0 3.0-4.5 ft. Telescopic Single K4261-4
Arm One-Pak® Pkg.
w/LTA 2.0-CW 5.0-8.2 ft. Telescopic K4261-5
Single Arm One-Pak® Pkg.
w/LTA 2.0 3.0-4.5 ft. Telescopic Single K4261-7
Arm & Arc Sensor/Lamp Kit One-Pak® Pkg.
Statiflex® 200-M K1654-5 N/A N/A 1200 102
MERV 14 Filter Base Unit Dual Arm (46)
w/LFA 3.1 10 ft. Dual Arm One-Pak® Pkg. K4261-8 115/1/60
w/LFA 3.1 10 ft. Dual Arm & Arc Sensor/ K4261-12
Lamp Kit One-Pak® Pkg.
w/LFA 4.1 13 ft. Dual Arm One-Pak® Pkg. K4261-9
w/LTA 2.0 3.0-4.5 ft. Telescopic CW Dual K4261-10
Arm One-Pak® Pkg.
w/LTA 2.0-CW 5.0-8.2 Telescopic Single K4261-11
Arm One-Pak® Pkg.
w/LTA 2.0 3.0-4.5 ft. Telescopic Dual K4261-13
Arm & Arc Sensor/Lamp Kit One-Pak®
Pkg.
Statiflex® 200-M K1654-6 N/A N/A Cellulose-Polyester/ 90 (41)
MERV 16 Filter Base Unit Single Arm MERV 16
538 (50)

204 | www.lincolnweldfumecontrol.com
WELD FUME CONTROL

Fume Extraction Arms Processes

• Stick
Built with the Welder in Mind • TIG
• MIG
• Flux-Cored
• Ultra-light dent and
scratch-resistant material
• 360 degree rotatable hood
• Advanced spring-balanced Literature
E13.16
internal mechanism holds
the position you set
LTA 2.0-CW

LFA 4.1-LC
• Made in the USA of
US and foreign content

LFA 2.0

Product Product Arm Length CFM with SF2400 Fan HxW Net Wt.
Name Number Use With ft (m) (with no filtration) in (mm) lb (kg)
LFA 3.1 K2633-5 Mobiflex® 10 760 8 x 118 33
(3.1) (203 x 3000) (15)
K1655-8 Statiflex®

LFA 3.1 K2633-6 Mobiflex® 34

(w/ Arc Sensor/Lamp Kit ) (15.4)
LFA 4.1 K2633-7 Mobiflex® 13 760 8 x 157 37
(4.1) (203 x 4000) (16.7)
K1655-9 Statiflex®

LFA 4.1 K2633-8 Mobiflex® 38

(w/ Arc Sensor/Lamp Kit ) (17)
LFA 4.1-LC K1655-13 Statiflex® 33
(Low Ceiling) (15)
LFA 2.0 K1655-12 Statiflex® 6.5 760 8 x 85 33
(2.0) (203 x 2160) (15)
LTA 2.0 Telescopic K1655-10 Statiflex® Variable from 3.0-4.5 780 8 x 39.5-55 15.4
(1.0-1.5) (203 x 1000-1400) (7)
LTA 2.0-CW, Telescopic K1655-14 Statiflex® Variable from 5.0-8.2 8 x 62-100.5 59.5
(1.5-2.5) (203 x 1575-2553) (27)

www.lincolnweldfumecontrol.com | 205
WELD FUME CONTROL

Processes
Statiflex® 800 • Stick
• TIG
Fume Doesn’t Stand a Chance • MIG
• Flux-Cored
• Dual Arm Capacity with Optional Extended Reach
up to 27 ft. (8.2 m)
• Automatic Filter Cleaning Cuts Down on Filter Literature
Replacement Costs and System Maintenance E13.14
• Automatic Filter Cleaning
• Front Loading Filters
• Integrated Spark Arrestor
• 3-Year Warranty
• Made in the USA of
US and foreign content

Product Product Input Power Input Current @ Filter Type/ Air Flow HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Rated Output Filter Size, ft2 (m2) CFM in (mm) lb (kg)
Statiflex® 800 K3680-1 N/A N/A Cellulose/ 735 38 x 34 x 36 270
MERV 14 Filter Base Unit Single Arm 568 (52) (970 x 860 x 910) (122)
w/LFA 3.1 10 ft. Single Arm One-Pak® Pkg. K4468-1 115/1/60
w/LFA 3.1 10 ft. Single Arm w/7 ft. Ext. Crane K4468-2
and SF4200 Fan One-Pak® Pkg.
w/LFA 3.1 10 ft. Single Arm w/14 ft. Ext. Crane K4468-3
and SF4200 Fan One-Pak® Pkg.
w/LFA 3.1 10 ft. Single Arm w/Arc Sensor and K4468-5
SF2400 Fan One-Pak® Pkg.
w/LFA 3.1 10 ft. Single Arm w/Arc Sensor, 7 ft. K4468-6
Ext. Crane and SF2400 Fan One-Pak® Pkg.
w/LFA 4.1 13 ft. Single Arm and SF2400 Fan K4468-8
One-Pak® Pkg.
w/LFA 4.1 13 ft. Single Arm w/7 ft. Ext. Crane K4468-9
and SF4200 Fan One-Pak® Pkg.
w/LFA 4.1 13 ft. Single Arm w/14 ft. Ext. Crane K4468-10
and SF4200 Fan One-Pak® Pkg.
w/LTA 2.0 3.0-4.5 ft. Telescopic Single Arm K4468-13
and SF2400 Fan One-Pak® Pkg.
w/LTA 2.0 3.0-4.5 ft. Telescopic Single Arm K4468-15
w/Arc Sensor and SF2400 Fan One-Pak® Pkg.
Statiflex® 800 K3680-2 N/A N/A 1200 102
MERV 14 Filter Base Unit Dual Arm (46)
w/LFA 3.1 13 ft. Dual Arm w/Arc Sensor and K4468-7 115/1/60
SF2400 Fan One-Pak® Pkg.
w/LFA 4.1 13 ft. Dual Arm and SF2400 Fan K4468-11
One-Pak® Pkg.
w/LTA 2.0 3.0-4.5 ft. Telescopic Dual Arm and K4468-14
SF2400 Fan One-Pak® Pkg.
w/LTA 2.0 3.0-4.5 ft. Telescopic Dual Arm w/ K4468-16
Arc Sensor and SF2400 Fan One-Pak® Pkg.
Statiflex® 800 K3681-1 N/A N/A Cellulose- 270
MERV 16 Filter Base Unit Single Arm Polyester/ (122)
MERV 16
MERV 16 Filter Base Unit Dual Arm K3681-2 538 (50) 290
(131)

206 | www.lincolnweldfumecontrol.com
WELD FUME CONTROL

DownFlex® Tables Processes

• Stick
All in One Workbench and • TIG
• MIG
Extraction System • Flux-Cored
• Plasma Cutting
• DownFlex® 200-M and 400-MS/A models • Grinding(1)
feature strong back and down draft
extraction capacity, 3 stage spark arrestor Input(2)
and sizable 560 ft2 (52 m2) of filter media
• The 100-NF model is designed for
fabricators that prefer to add their own
extraction system to the downdraft table Literature
E13.50 (200-M and 400-MS/A)
E13.53 (100-NF)

(1)
Not suitable for use
when grinding Aluminum,
Shown: DownFlex® 400-MS/A Magnesium or other
explosive materials.
(2)
200-M and 400-MS/A only.

Product Product Input Power Input Current @ Filter Size Air Flow H x W x D(1) Net Wt.
Name Number Voltage/Phase/Hertz Rated Output Filter Type ft2 (m2) CFM in (mm) lb (kg)
DownFlex® 400-MS/A K2751-11 208-230/460/3/60 11.7-10.5/5.4A Cellulose-Polyester 560 N/A 61.6 x 54.7 x 39.2 718
Fiber Filter (52) (1565 x 1389 x 996) (326)
K2751-16
DownFlex® 200-M K2751-10 208-230/460/3/60 11.7-10.5/5.4A Cellulose-Polyester 560 N/A 61.6 x 54.7 x 39.2 683
380/3/50 Fiber Filter (52) (1565 x 1389 x 996) (311)
K2751-13 4.1A
K2751-14
DownFlex 100-NF
®
K2751-9 N/A N/A No Filtration N/A N/A 54.7-61.7 x 36 x 54.1 330
(1389-1567 x 914.4 x 1374.1) (150)

For DownFlex® 200-M: With height adjustments: 1.5 in. (38 mm) additional height for leveling. With Wheel Kit: 62.9 in. (1598 mm) height.
(1)

Modular Extraction Hood Processes

• Stick
Modular. Effective. Multi-Process. • TIG
• MIG
• Flux-Cored
• Engineered to contain and extract • Plasma Cutting
welding, cutting, arc gouging and grinding • Arc Gouging
fume from the work environment • Grinding(1)

• Perimeter pull technology maximizes

fume extraction effectiveness at lower
airflow rates Literature
MC12-05
• Modular aluminum construction enables
easy assembly, cleaning and service

Not suitable for use

(1)

when grinding Aluminum,

Magnesium or other
explosive materials.

Product Recommended Recommended Air Velocity

Name Product Number/Sizes Extraction Capacity in Connected Duct
Modular Extraction Hood See MC12-05 for full list of 290-474 CFM per square meter of hood 3,000-3,500 ft/min
product numbers and sizes (27-44 CFM per square foot of hood)

www.lincolnweldfumecontrol.com | 207
WELD FUME CONTROL

Formed Extraction Hood Processes

• TIG
Your Fume Solution for Robotic Systems • MIG
• Flux-Cored
• Metal-Cored
• The ideal solution for welding
fume extraction on robotic cells
• Designed and sized to fit Literature
Lincoln Electric pre-engineered MC12-05
robotic cells
• Incorporate a modular Statiflex®
self-cleaning filter bank into
the hood design for filtration
of welding fume

Statiflex® Filter Bank Processes

• Stick
High Efficiency Industrial Fume • TIG
• MIG
Extraction and Filtering • Flux-Cored
• Plasma Cutting
• Ideal for filtering fume and particulate generated • Arc Gouging
by welding, cutting, arc gouging and grinding • Grinding(1)

• Multi-flow technology disperses incoming air

evenly throughout the filter bank, resulting in Input
longer filter life
• Pulse amplifier technology creates a uniform,
high-energy pulse of compressed air to clean
Product Number
the filters See Literature for
• Available with 4-48 filter cartridges more information

Literature
MC12-05

Not suitable for use

(1)

when grinding Aluminum,

Magnesium or other
explosive materials.

Product Fan Sizes

Name Filter Type HP
Statiflex® Filter Banks Rated MERV 16 or MERV 11 7.5-75
(4 to 48 filter cartridges)

208 | www.lincolnweldfumecontrol.com
WELD FUME CONTROL

Statiflex® Complete Processes

• Stick
Compact Fume Extraction System • TIG
• MIG
• Flux-Cored
• Small Footprint • Plasma Cutting
• Automatic Cleaning • Arc Gouging
• Grinding(1)
• Quick and Simple Installation
• Quiet Operation Input
• Intelligent Fan Control Technology

Literature
E13.15

Not suitable for use

(1)

when grinding Aluminum,

Magnesium or other
explosive materials.
Shown: Statiflex Complete 4 System

Product Product Input Power Motor Input Current Number Air Flow Inlet Diameter HxWxD Net Wt.
Name Number Voltage/Phase/Hertz (hp) (amps) of Filters CFM in (mm) in (mm) lb (kg)
Statiflex® AD1326-14 400-480V/3~/50-60Hz 4 6 4 2650 12 (305) 117 x 50 x 52 970
Complete 4 575V option (2972 x 1270 x 1320) (440)
Complete 8 AD1326-15 10 12 8 4200 20 (508) 135 x 84 x 47 1830
(3429 x 2134 x 1194) (830)
Complete 12 AD1326-16 12 154 x 84 x 47 2100
(3912 x 2134 x 1194) (952)

PRISM™ Processes
• Stick
Compact Fume Extraction System • TIG
• MIG
• Flux-Cored
• Vertical Filters • Plasma Cutting
• Lincoln Smart Connect™ • Arc Gouging
• Grinding(1)
• Small Footprint
• Automatic Cleaning Input
• Quick and Simple Installation
• Quiet Operation
• Intelligent Fan Control Technology
Literature
E13.15

Not suitable for use

(1)

when grinding Aluminum,

Magnesium or other
explosive materials.

Product Product Input Power Motor Input Current Number Air Flow Inlet Dia HxWxD Net Wt. Clearance Filter Cleaning
Name Number Voltage/Phase/Hertz (hp) (amps) of Filters CFM in (mm) in (mm) lb (kg) Needed Control
Prism™ AD1326-17 380-480V/3~/ 5 7.5 4 2750 One on 163 x 45 x 75 1475 3.5 ft Pressure-
5 HP 50-60Hz @ 7 in. back at (4140 x 1143 x 1905) (669) (min.) based
Model 575V option(1) WG 16 (406) for front
10 HP AD1326-18 10 14.5 3900 169 x 45 x 75 1579 3 ft (min.)
Model @ 7 in. (4293 x 1143 x 1905 (716) for control
WG panel
(1)
Optional frequency drive for 575V applications

www.lincolnweldfumecontrol.com | 209
WELD FUME CONTROL

The Circulator® Processes

• Stick
Make a Cleaner Work Environment • TIG
• MIG
• Flux-Cored
• Free-standing general filtration system for • Metal-Cored
weld fume control; ideal for manufacturing and
fabrication facilities, and offers an economical
Input
alternative to a push/pull system
• Intended to supplement an existing source
extraction system as well as natural draft/forced
ventilation to reduce overall concentration of
welding fume, dust and dirt in operator areas Literature
MC11-37
• Green Drive control system reduces energy
™

costs and increases filter life by continually

monitoring operation and automatically adjusting
airflow to maintain optimal performance levels
• RotaPulsePlus™ Automatic Filter Cleaning
System. Each time the system is switched off,
an automatic cleaning cycle takes place. During
this cycle both filter cartridges are cleaned by
compressed air jets from the RotaPulsePlus™
system. The particulate is deposited in the drum
beneath the filter

Push/Pull Systems Processes

• Stick
Improve General Workplace Air Quality • TIG
• MIG
• Flux-Cored
• Remove fume and metal particulate layer • Metal-Cored
from the air of your metalworking facility
before it settles back to the floor
• Ideal for environments where workers Literature
are in spaces where effective source MC11-106
capture is difficult
• Effective when fabricating large weldments
and when the welder needs to frequently
change positions

Push/Pull System installed at Elgin Sweeper Company

210 | www.lincolnweldfumecontrol.com
WELD FUME CONTROL

High Vacuum Central Systems Processes

• Stick
Compact Multi-Station Source Extraction • TIG
• MIG
• Flux-Cored
• A cost effective choice that uses a • Grinding(1)
central turbine and filter to supply
suction throughout the plant
• Uses smaller ductwork and lower Literature
airflow values MC11-107

• Header ducts are frequently one

size throughout the entire system Not suitable for use
(1)

when grinding Aluminum,

Magnesium or other
explosive materials.

Low Vacuum Central Systems Processes

• Stick
Low Noise Multi-Station Source Extraction • TIG
• MIG
• Flux-Cored
• Low-vacuum, exhaust systems for source • Plasma Cutting
capture applications • Grinding(1)
• Ideal for addressing welding fume removal in
educational environments and manufacturing Literature
plants that require multiple station drops MC11-107

• Easy arm positioning, low noise levels

• Optional automatic On/Off control reduces Not suitable for use
(1)

energy costs when grinding Aluminum,

Magnesium or other
explosive materials.

Guardian™ Fire Safety Solutions Processes

• Stick
Prevention, Detection, Suppression • TIG
• MIG
• Flux-Cored
• Prevent fire with a Spark Guardian™ spark • Plasma Cutting
arrestor and an Oil Guardian™ limestone feeder. • Grinding(1)
The Spark Guardian helps to keep sparks and
cigarette butts from reaching the combustible
Product Number
filter or dustbin debris. The Oil Guardian See page 219
continuously injects limestone powder into the
fume control system ductwork which absorbs
Literature
vaporized oil generated when welding on oily
MC12-20
parts. The resulting dry matter is blown off the
filters during the cleaning cycle.
• Detect fire early with the Guardian Control™
detection panel to reduce damage to your filter Not suitable for use
(1)

when grinding Aluminum,

system if combustion occurs Magnesium or other
explosive materials.
• Suppress fire with a Flame Guardian™ aerosol
generator inside the filter bank to quickly
extinguish a fire

www.lincolnweldfumecontrol.com | 211
WELD FUME CONTROL

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

Miniflex® Mobiflex® 200-M

Base Model (K3972-3) Required Accessories
• 8 ft. length x 1.75 in. I.D. (2.4 m x 45 mm) • Extraction Arm
extraction hose • Hose and Hood Kit
• LongLife-H main filter
• HEPA filter Base Models (200-M MERV14: K1653-4, K2497-12;
• Pre-Filter 200-M MERV 16: K1653-5)
• 2 spare sets of carbon brushes and seals • Filter
for motors • Plastic housing
• Flexible Hose, 8 in. (203 mm)
One-Pak® Package (K4260-2) • 19 ft. (6 m) 115 VAC Input Power Cord
• Everything listed above (K3972-3) (not on K2497-2 and K2497-3)
• EN 20 Nozzle, Bell Shaped (K2389-5) • Transformer Relay Kit

Mobiflex® 200-M MERV14 (K4259-2) and

X-Tractor® 1GC 200-M MERV16 (K4259-6) One-Pak® Package
Base Models (K652-1, K652-2) • Everything listed for a Base Model
• Adapter for 1.75 in. (45 mm) hose • LFA 3.1 10 ft (3.0 m) Arm
• 16 ft. x 1.75 in. (4.8 m x 45 mm) diameter flexible hose
• 2 spare sets of carbon brushes for motors Mobiflex® 200-M MERV14 (K4259-3) and
• Filter cartridge 200-M MERV16 (K4259-7) One-Pak® Package
• 12 ft. (3.6 m) power cord • Everything listed for a Base Model
• LFA 3.1 10 ft (3.0 m) Arm & Arc Sensor/Lamp Kit
One-Pak® Package (K4260-4)
• Everything listed above (K652-1, K652-2) Mobiflex® 200-M MERV14 (K4259-4) and
200-M MERV16 (K4259-8) One-Pak® Package
• Aluminum Suction Nozzle w/Magnetic Mounting
• Everything listed for a Base Model
• LFA 4.1 13 ft (4.0 m) Arm
Mobiflex® 100-NF
Mobiflex® 200-M MERV14 (K4259-5) and
Required Accessories
200-M MERV16 (K4259-9) One-Pak® Package
• Hose and Hood Set, 16 ft. (4.9 m)
• Everything listed for a Base Model
• Exhaust or Extension Hose Set, 16 ft. (4.9 m)
• LFA 4.1 13 ft (4.0 m) Arm & Arc Sensor/Lamp Kit

One-Pak® Package (K4260-3)

• Mobiflex 100-NF Base Unit (K1666-3)
• Hose and Hood Set
• Exhaust or Extension Hose Set

212 | www.lincolnweldfumecontrol.com
WELD FUME CONTROL

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

Mobiflex® 400-MS Statiflex® 200-M Single Arm

Required Accessories Required Accessories
• Extraction Arm • Extraction Arm
• Hose and Hood Kit • Stationary Fan
• Starter Overload Switch or Lamp with Arc Sensor
Base Models (400-MS MERV14: K1741-3, K2497-14; • Wall Mounting Bracket
400-MS MERV 16: K1741-4)
• Filter Base Models (200-M MERV 14: K1654-4;
• Plastic housing 200-M MERV 16: K1654-6)
• Flexible Hose, 8 in. (203 mm) • Filter
• 19 ft. (6 m) 115 VAC Input Power Cord • Filter Housing
(not on K2497-2 and K2497-3) • Hose - 8 in. (203 mm) diameter, 4.9 ft. (1.5 m) long
• Transformer Relay Kit • Hose Clamps - 8 in. (203 mm) (Qty. 2)
• Rubber Seal
Mobiflex® 400-MS MERV14 (K4384-1) and • Mounting Bracket
400-MS MERV16 (K4384-5) One-Pak® Package
• Reducer
• Everything listed for a Base Model
• LFA 3.1 10 ft (3.0 m) Arm
One-Pak® Package (K4261-2)
• Everything listed above for a Base Model
Mobiflex® 400-MS MERV14 (K4384-2) and
400-MS MERV16 (K4384-6) One-Pak® Package • LFA 3.1 10 ft (3.0 m) Arm
• Everything listed for a Base Model • Starter Overload Switch
• LFA 3.1 10 ft (3.0 m) Arm & Arc Sensor/Lamp Kit • Wall Mounting Bracket
• SF2400 Stationary Fan
Mobiflex® 400-MS MERV14 (K4384-3) and
400-MS MERV16 (K4384-7) One-Pak® Package One-Pak® Package (K4261-3)
• Everything listed for a Base Model • Everything listed above for a Base Model
• LFA 4.1 13 ft (4.0 m) Arm • LFA 4.1 13 ft (4.0 m) Arm
• Starter Overload Switch
Mobiflex® 400-MS MERV14 (K4384-4) and • Wall Mounting Bracket
400-MS MERV16 (K4384-8) One-Pak® Package • SF2400 Stationary Fan
• Everything listed for a Base Model
• LFA 4.1 13 ft (4.0 m) Arm & Arc Sensor/Lamp Kit One-Pak® Package (K4261-4)
• Everything listed above for a Base Model
• LTA 2.0 3.0-4.5 ft (0.9-1.4 m) Telescopic Arm
• Starter Overload Switch
X-Tractor® 3A, 5A and 8A
• Wall Mounting Bracket
Required Accessories
• SF2400 Stationary Fan
• Nozzles or Fume Extraction Guns
• Connection Kits
One-Pak® Package (K4261-5)
• Hoses, Adapters
• Everything listed above for a Base Model
• LTA 2.0-CW 5-8.2 ft (1.5-2.5 m) Telescopic Arm
Base Models (3A: K3965-1, K3965-2;
5A: K3966-1, K3966-2; 8A: K3967-1, K3967-2) • Starter Overload Switch
• Filter Cartridge • SF2400 Stationary Fan
• Automatic Filter Cleaning System
• Internal Compressed Air Regulator One-Pak® Package (K4261-6)
• Automatic Operation Connection • Everything listed above for a Base Model
• Starter/Overload Switch • LFA 3.1 10 ft (3.0 m) Arm & Arc Sensor/Lamp Kit
• Wall Mounting Bracket
• SF2400 Stationary Fan

www.lincolnweldfumecontrol.com | 213
WELD FUME CONTROL

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

Statiflex® 200-M Single Arm, con’t. Statiflex® 200-M Dual Arm, con’t.
One-Pak® Package (K4261-7) One-Pak® Package (K4261-11)
• Everything listed above for a Base Model • Everything listed above for a Base Model
• LTA 2.0 3.0-4.5 ft (0.9-1.4 m) Telescopic Arm & • LTA 2.0-CW 5-8.2 ft (1.5-2.5 m)
Arc Sensor/Lamp Kit Telescopic Arm (Qty. 2)
• Wall Mounting Bracket • Starter Overload Switch (Qty. 2)
• SF2400 Stationary Fan • SF2400 Stationary Fan (Qty. 2)

One-Pak® Package (K4261-12)

• Everything listed above for a Base Model
Statiflex® 200-M Dual Arm
• LFA 3.1 10 ft (3.0 m) Arm &
Required Accessories Arc Sensor/Lamp Kit (Qty. 2)
• Extraction Arm (Qty. 2) • Wall Mounting Bracket (Qty. 2)
• Stationary Fan (Qty. 2) • SF2400 Stationary Fan (Qty. 2)
• Overload Switch or Arc Sensor/Lamp Kit (Qty. 2)
• Wall Mounting Brackets (Qty. 2) One-Pak® Package (K4261-13)
• Everything listed above for a Base Model
Base Model (200-M MERV 14: K1654-5) • LTA 2.0 3.0-4.5 ft (0.9-1.4 m) Telescopic Arm &
• Filter Arc Sensor/Lamp Kit (Qty. 2)
• Filter Housing • Wall Mounting Bracket (Qty. 2)
• Hoses, 8 in. (203 mm) diameter (Qty. 2) • SF2400 Stationary Fan (Qty. 2)
• Hose Clamps, 8 in. (203 mm) diameter (Qty. 4)
• Rubber Seals (Qty. 2)
• Non-Return Valves, 8 in. (203 mm) (Qty. 2) Statiflex® 400-MS Single Arm
• Reducers (Qty. 2) Required Accessories
• Adapters (Qty. 2) • Extraction Arm
• Mounting Bracket • Stationary Fan
• Arc Sensor/Lamp Kit
One-Pak® Package (K4261-8) • Wall Mounting Bracket
• Everything listed above for a Base Model
• LFA 3.1 10 ft (3.0 m) Arm (Qty. 2) Base Model (400-MS MERV 14: K1742-1,
• Starter Overload Switch (Qty. 2) 400-MS MERV 16: K1742-2)
• Wall Mounting Bracket (Qty. 2) • Filter
• SF2400 Stationary Fan (Qty. 2) • Filter Housing
• Particulate Collection Bin
One-Pak® Package (K4261-9) • Pre-Filter Box and Filter
• Everything listed above for a Base Model • Hoses, 6 in. (152 mm) diameter (Qty. 2)
• LFA 4.1 13 ft (4.0 m) Arm (Qty. 2) • Hose Clamps (Qty. 4)
• Starter Overload Switch (Qty. 2) • Rubber Seals (Qty. 2)
• Wall Mounting Bracket (Qty. 2) • Mounting Brackets (Qty. 2)
• SF2400 Stationary Fan (Qty. 2) • Control Cable for Filter Cleaning Mechanism

One-Pak® Package (K4261-10)

• Everything listed above for a Base Model
• LTA 2.0 3.0-4.5 ft (0.9-1.4 m) Telescopic Arm (Qty. 2)
• Starter Overload Switch (Qty. 2)
• Wall Mounting Bracket (Qty. 2)
• SF2400 Stationary Fan (Qty. 2)

214 | www.lincolnweldfumecontrol.com
SECTION HEADER

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

Statiflex® 800 Single Arm MERV 14 One-Pak® Package (K4468-8)

Base Model Single Arm Units • Everything listed above for a Base Model
(800 MERV 14: K3680-1; 800 MERV 16: K3681-1) • LFA 4.1 13 ft (4.0 m) Single Arm
• Base Unit • Starter Overload Switch
• Complete Filter Unit • Wall Mounting Bracket
• 8 In. Diameter Connection Hoses, Extended • SF2400 Stationary Fan
Length 59 in. (1)
• 8 in. Diameter Hose Clamps (2); Reducers (1); Inlet MERV 14 One-Pak® Package (K4468-9)
Flanges (1); Sealing Rings (1); Rubber Sealing Bands (2)
• Everything listed above for a Base Model
• Mounting Bracket
• LFA 4.1 13 ft (4.0 m) Single Arm w/7 ft Ext. Crane
• Starter Overload Switch
MERV 14 One-Pak® Package (K4468-1)
• Wall Mounting Bracket
• Everything listed above for a Base Model
• SF2400 Stationary Fan
• LFA 3.1 10 ft (3.0 m) Single Arm
• Starter Overload Switch
MERV 14 One-Pak® Package (K4468-10)
• Wall Mounting Bracket
• Everything listed above for a Base Model
• SF2400 Stationary Fan
• LFA 4.1 13 ft (4.0 m) Single Arm w/14 ft. Ext. Crane
• Starter Overload Switch
MERV 14 One-Pak® Package (K4468-2)
• Wall Mounting Bracket
• Everything listed above for a Base Model
• SF2400 Stationary Fan
• LFA 3.1 10 ft (3.0 m) Single Arm w/7 ft Ext. Crane
• Starter Overload Switch
MERV 14 One-Pak® Package (K4468-13)
• Wall Mounting Bracket
• Everything listed above for a Base Model
• SF2400 Stationary Fan
• LTA 2.0 3.0-4.5 ft (0.9-1.4 m) Telescopic Single Arm
• Starter Overload Switch
MERV 14 One-Pak® Package (K4468-3)
• SF2400 Stationary Fan
• Everything listed above for a Base Model
• LFA 3.1 10 ft (3.0 m) Single Arm w/14 ft. Ext. Crane
MERV 14 One-Pak® Package (K4468-15)
• Starter Overload Switch
• Everything listed above for a Base Model
• Wall Mounting Bracket
• LTA 2.0 3.0-4.5 ft (1.0-1.4 m) Telescopic Single Arm
• SF2400 Stationary Fan w/Arc Sensor
• Wall Mounting Bracket
MERV 14 One-Pak® Package (K4468-5) • SF2400 Stationary Fan
• Everything listed above for a Base Model
• LFA 3.1 10 ft (3.0 m) Single Arm w/Arc Sensor
• Starter Overload Switch
• SF2400 Stationary Fan

MERV 14 One-Pak® Package (K4468-6)

• Everything listed above for a Base Model
• LFA 3.1 10 ft (3.0 m) Single Arm w/Arc Sensor
& 7 ft Ext. Crane
• Wall Mounting Bracket
• SF2400 Stationary Fan

www.lincolnweldfumecontrol.com | 215
WELD FUME CONTROL

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

Statiflex® 800 Dual Arm DownFlex® 100-NF, DownFlex® 200-M

Base Model (100-NF: K2751-9; 200-M: K2751-10, and DownFlex® 400-MS/A
K2751-13, K2751-14; 400-MS/A: K2751-11, K2751-15, Base Model (100-NF: K2751-9; 200-M: K2751-10,
K2751-16) K2751-13, K2751-14; 400-MS/A: K2751-11, K2751-15,
• Base Unit K2751-16)
• Complete Filter Unit • Sturdy Welding Table
• 8 in. Diameter Connection Hoses, Extended • Backdraft Panel
Length, 59 in. (2) • Side Panels
• 8 in. Diameter Hose Clamps (4); Reducers (2); • Filters & Controls (not on 100-NF)
Inlet Flanges (2); Sealing Rings (2); Rubber
Sealing Bands (4)
• Non-Return Valves (2)
• Mounting Bracket Modular Extraction Hood
Required Accessories
MERV 14 One-Pak® Package (K4468-7) • Exhaust Fan and Controls
• Everything listed above for a Base Model • Filtration Unit
• LFA 3.1 10 ft (3.0 m) Dual Arm w/Arc Sensor (Qty. 2)
• Starter Overload Switch (Qty. 2)
• Wall Mounting Bracket (Qty. 2) Statiflex® Filter Banks
• SF2400 Stationary Fan (Qty. 2) Base Model
• Filter Bank
MERV 14 One-Pak® Package (K4468-11) • Dust Drum(s)
• Everything listed above for a Base Model
• LFA 4.1 13 ft (4.0 m) Dual Arm (Qty. 2)
• Starter Overload Switch (Qty. 2) Statiflex® Complete
• Wall Mounting Bracket (Qty. 2) Statiflex® Complete System (System 4: AD1326-14;
• SF2400 Stationary Fan (Qty. 2) System 8: AD1326-15; System 12: AD1326-16; )
• Filtration Unit
• Dust Collection Bin
MERV 14 One-Pak® Package (K4468-14)
• Exhaust Fan
• Everything listed above for a Base Model
• Stand
• LTA 2.0 3.0-4.5 ft (0.9-1.4 m) Telescopic
Dual Arm (Qty. 2) • Control Package
• Starter Overload Switch (Qty. 2) • Exhaust Silencer
• Wall Mounting Bracket (Qty. 2)
• SF2400 Stationary Fan (Qty. 2)
PRISM™
One-Pak® Package (K4468-16) Prism™ System (5 HP: AD1326-17; 10 HP: AD1326-18 )
• Everything listed above for a Base Model • Filtration Unit
• LTA 2.0 3.0-4.5 ft (0.9-1.4 m) Telescopic • Dust Collection Bin
Dual Arm w/Arc Sensor (Qty. 2) • Exhaust Fan
• Starter Overload Switch (Qty. 2) • Stand
• SF2400 Stationary Fan (Qty. 2) • Control Package
• Exhaust Silencer

216 | www.lincolnweldfumecontrol.com
WELD FUME CONTROL

Accessories

Mobiflex® 400-MS
Mobiflex® 100-NF

Mobiflex® 200-M
X-Tractor® 1GC

X-Tractor® 8A
X-Tractor® 5A
X-Tractor® 3A
Miniflex®
Base Model

Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model
(230V)
(120V)
K2497-18 Base

K2497-11

K2497-14
K2497-12
K3972-3

K3966-2
K3965-2
K1666-3

K3966-1

K3967-2
K3965-1
K1653-5
K1653-4

K3967-1
K1741-4
K1741-3
K652-2
K652-1
Product Name Product No.
REQUIRED
Hose and Hood Set, 16 ft. (4.9 m) K1668-1 • •

Exhaust or Extension Hose Set, K1668-2 • •

16 ft. (4.9 m)
Hose and Hood Kit K1668-3 • • • •

LFA 3.1 10 ft. (3 m) Extraction Arm K2633-5 • • • • • •

LFA 4.1 13 ft. (4 m) Extraction Arm K2633-7 • • • • • •

LFA 3.1 10 ft. (3 m) Extraction Arm w/Lamp K2633-6 • • • • • •

LFA 4.1 13 ft. (4 m) Extraction Arm w/Lamp K2633-8 • • • • • •

GENERAL
EN 20 Extraction Nozzle K2389-5 • • • • • • • • • •

SHM-300 Suction Head for Manual K639-1 • • • • • • • • • •

Welding, 12 in. (300 mm)
SHMS-400 Low Noise Nozzle K639-4 • •

SHFA Flat Suction Head with Flexible Arm K639-5 • • • • • • • • • •

UNM Suction Head for Heavy Smoke K639-6 • • • • • • • • • •

NKT Nozzle Kit, K2389-3

1 in. x 8 ft. Hose (254 mm x 2.4 m), • • • • • • • • • •
1.75 in. (45 mm) Hose Adapter
NKC Nozzle Kit, K2389-4
1 in. x 8 ft. Hose (254 mm x 2.4 m), • • • • • • • • • •
1.75 in. (45 mm) Hose Adapter
Extraction Hose, K2389-8 • • • • • • • • • •
1.75 in. x 16 ft. (45 mm x 4.9 m)
Extraction Hose, K2389-9 • • • • • • • • • •
1.75 in. x 8 ft. (45 mm x 2.4 m)
Hose-to-Hose Adapter, K2389-10 • • • •
1.75 x 1.75 in. (45 x 45 mm)
Hose Connection Outlet K2389-2 • •

Wall Mounting Bracket K2389-7 • •

Connection Kit, X-Tractor 3A ®

K3968-1 • •

Connection Kit, X-Tractor® 5A/8A K3969-1 • • • •

• Required • Optional

www.lincolnweldfumecontrol.com | 217
WELD FUME CONTROL

Accessories

Mobiflex® 400-MS
Mobiflex® 100-NF

Mobiflex® 200-M
X-Tractor® 1GC

X-Tractor® 8A
X-Tractor® 5A
X-Tractor® 3A
Miniflex®
Base Model

Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model
(230V)
(120V)
K2497-18 Base

K2497-11

K2497-14
K2497-12
K3972-3

K3966-2
K3965-2
K1666-3

K3966-1

K3967-2
K3965-1
K1653-5
K1653-4

K3967-1
K1741-4
K1741-3
K652-2
K652-1
Product Name Product No.
GENERAL, CON’T.
LongLife-H Filter KP2390-1 • •

HEPA Filter KP2390-4 • •

Pre-filter KP2390-3 • •

Miniflex® Filter One-Pak® KP2390-5 • •

Activated Carbon Filter KP2389-1 • •

Activated Carbon Filter KP1852-1 • • •

Filter, X-Tractor® 1GC, 3A KP2069-1 • • • •

MERV 14 Filter KP1673-1 • • •

MERV 16 (HE) Nano Filter KP1673-9 • • •

MERV 14 Filter KP1673-2 • • •

MERV 16 (HE) Nano Filter KP1673-10 • • •

Pre-Filter KP1673-5 • • •

Pre-Filter KP1673-6 • • •

Filter, X-Tractor® 5A, 3G, 4G KP2061-1 • •

Filter, X-Tractor 8A
®
KP3984-1 • •

• Required • Optional

218 | www.lincolnweldfumecontrol.com
WELD FUME CONTROL

Accessories

DownFlex® 100-NF

DownFlex® 200-M
Statiflex® 400-MS
Statiflex® 200-M

Statiflex® 800

DownFlex®
400-MS/A
MERV 16 Single Arm

MERV 16 Single Arm

MERV 16 Single Arm

MERV 14 Single Arm

MERV 14 Single Arm

MERV 14 Single Arm

MERV 16 Dual Arm

MERV 14 Dual Arm

MERV 14 Dual Arm

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model
K2751-10,

K2751-11,
K3680-2
K3680-1
K1654-6
K1654-5
K1654-4

K3681-2

K2751-9
K3681-1
K1742-2

-15, -16
K1742-1

-13, -14
Product Name Product No.
REQUIRED FOR STATIFLEX® 200-M SINGLE AND DUAL ARM AND STATIFLEX® 400-MS SINGLE ARM(1)(2)
Extraction Arms (Category 2)
LTA 2.0 Telescopic Extraction Arm K1655-10 • • • • • • • • •

LFA 2.0 6.5 ft. (2 m) Extraction Arm K1655-12 • • • • • • • • •

LFA 3.1 10 ft. (3 m) Extraction Arm K1655-8 • • • • • • • • •

LFA 4.1 13 ft. (4 m) Extraction Arm K1655-9 • • • • • • • • •

LFA 4.1-LC Low Ceiling 13 ft. (4 m) Extraction Arm K1655-13 • • • • • • • • •

LTA 2.0-CW Telescopic Extraction Arm K1655-14 • • • • • • • • •

Standard System (Category 3A) – Requires fan, starting control and mounting brackets
SF2400 Stationary Fan (115V/1HP) K1656-9 • • • • • • • • •

SF2400 Stationary Fan (230V/1HP) K2497-13 • • • • • • • • •

Starter Overload Switch for 115V K1494-2 • • • • • • •

Starter Overload Switch for 230V K1494-3 • • • • • • •

Arc Sensor/Lamp Kit for Wall Mounted Arms (2)

K1669-4 (2) • • • • • • • • •

SF2400 Wall Mounting Bracket (use with LFA 3.1 and 4.1) K1657-1 • • • • • • • • •

SF2400 Wall Mounting Bracket (use with LTA 2.0, LFA 2.0 and LFA 4.1-LC) K1657-2 • • • • • • • • •

Extension Crane System (Category 3B) – Requires fan, starting control and extension crane
SF4200 Stationary Fan (2 HP) K1656-4 • • • • • •

Starter/Overload Switch for SF4200 Fan K1494-10 • • • •

Arc Sensor/Lamp Kit for SF4200 Fan K1669-10 • • • • • •

EC 2 Extension Crane, 7 ft. (2.1 m) K1671-1 • • • • • •

EC 4 Extension Crane, 14 ft. (4.3 m) K1671-2 • • • • • •

Statiflex 200-M Single and Dual Arm and Statiflex 400-MS Single Arm » (1)For a Single Arm Package, choose one item from Category 2, and
one item each from Systems 3A or 3B. For a Dual Arm Package, choose two items from Category 2, and two items each from System 3A. • Required • Optional
Statiflex 400-MS Single Arm » (2)Requires Arc Sensor/Lamp Kit to operate Statiflex 400-MS Self-Cleaning Controls.

www.lincolnweldfumecontrol.com | 219
WELD FUME CONTROL

Accessories

DownFlex® 100-NF

DownFlex® 200-M
Statiflex® 400-MS
Statiflex® 200-M

Statiflex® 800

DownFlex®
400-MS/A
MERV 16 Single Arm

MERV 16 Single Arm

MERV 16 Single Arm

MERV 14 Single Arm

MERV 14 Single Arm

MERV 14 Single Arm

MERV 16 Dual Arm

MERV 14 Dual Arm

MERV 14 Dual Arm

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model

Base Model
K2751-10,

K2751-11,
K3680-2
K3680-1
K1654-6
K1654-5
K1654-4

K3681-2

K2751-9
K3681-1
K1742-2

-15, -16
K1742-1

-13, -14
Product Name Product No.
GENERAL
230V Conversion Kit for SF2400 Fan K1750-1 • • • • •

Air Exhaust Silencer K1534-2 • • • • •

Connector, 8 in. (203.2 mm) Duct to Extractor Arm K1657-5 • •

Statiflex® 200-M Conversion Kit (Single to Dual Arm; 2 Required) K1743-3 •

Central System Connection Kit K2752-10 •

Dust Container K2752-11 •

Plasma Cutting Work Grid (max. 50A) K2752-2 • • •

Working Light Kit K2752-3 • • •

Mounting Kit for Bench Vise (cannot use with K2752-2) K2752-8 • • •

Current Activated Start/Stop Sensor (400-MS/A only) K2752-4 •

Motion Activated Start/Stop Sensor (400-MS/A only) K2752-5 •

Wheel Kit (max. load 330 lb./149.7 kg) K2752-6 • •

Silencer/Outlet Duct K2752-7 • •

Dust Tray Lid K2752-9 • •

Statiflex 200-M MERV 14 Cellulose Filter

®
KP1673-1 • • •

Statiflex 200-M Activated Carbon Filter

®
KP1852-1 • • •

Statiflex® 400-MS MERV 14 Filter KP1673-2 • •

Statiflex 400-MS MERV 16 (HE) Filter

®
KP1673-4 • •

Statiflex® 200-M Pre-Filter KP1673-5 • • • • • • •

Statiflex 400-MS Pre-Filter

®
KP1673-6 • •

Pre-Spark Arrestors (qty. 2) KP4052-1 • •

Spark Arrestors (qty. 2) KP2752-12 • • • • • • •

MERV 16 (HE) Filter (qty. 2) KP2752-16 • •

HEPA Filter Kit K2752-1 • •

HEPA Filter for K2752-1 KP2752-14 • •

Discharge Filter KP3551-41 • •

Plasma Cutting Pre-filter Kit (Set of 2 for use in K2752-2) KP2752-17 • • •

• Optional

220 | www.lincolnweldfumecontrol.com
WELD FUME CONTROL

Accessories
Guardian™ Fire Safety Solutions
Product
Product Name Number
PREVENTION
Spark Guardian™ 10 AD1387-4
Spark Guardian™ 16 AD1387-5
Spark Guardian 20™
AD1387-6
Oil Guardian™ 480/3/60 AD1387-23
DETECTION AND SUPPRESSION
Guardian™ Control AD1387-29
Smoke Detector T600 S29287-55
Smoke Detector T1500 S29287-56
Heat Detector Set AD1387-25
Spark Detector Set AD1387-27
Sliding Valve, 10 in (254 mm) AD1387-86
Sliding Valve, 12 in (305 mm) AD1387-82
Sliding Valve, 16 in (406 mm) AD1387-83
Sliding Valve, 20 in (508 mm) AD1387-84
Sliding Valve, 24 in (610 mm) AD1387-85
Solenoid Valve AD1387-54
Flame Guardian™ 200 AD1387-55
Flame Guardian 500
™
AD1387-56
Replacement Aerosol Canister, AD1387-57
Flame Guardian™ 200
Replacement Aerosol Canister, AD1387-58
Flame Guardian™ 500

www.lincolnweldfumecontrol.com | 221
EDUCATION SOLUTIONS
MODEL JOINT POSITIONS STAND PROCESS INPUT
CONFIGURATIONS
5F (Pipe on Plate)
Schedule 40 Pipe
6 in. Diameter
2 in. Diameter
Groove Joint

All Position

Frequency
Flat Plate

FCAW-GS
FCAW-SS
XXS Pipe

Tabletop
Tee Joint

Voltage
GMAW
SMAW

Phase
GTAW
6G
5G
4G
3G
2G

4F
1G
2F

3F

Welding Education Training Systems

VRTEX® 360+ Dual User • • • • • • • • • • • • • • • 1 50/60 115/230
VRTEX® 360 Single User • • • • • • • • • • • • • • • 1 50/60 115/230
VRTEX Transport
® ™
• • • • • • • • • 1 50/60 115/230
VRTEX Engage
® ®
• • • • • • • 1 50/60 115/230
REALWELD ®
• • • • • • • • • 1 50/60 115/230

WELDING EQUIPMENT » Power Wave® 300 Ready-Pak® Package • ClassMate™ Robotic Education Cell • Welding Booths • Welding Tables •
Welding Gear
CUTTING EQUIPMENT » Torchmate® 4400 & 4800 CNC Plasma Cutting Tables

KEY: Excellent Good Optional

EDUCATION SOLUTIONS

Education Solutions Processes

• SMAW
One Stop. One Partner. • GTAW
• GMAW
• FCAW
• SAW
• Plasma Cutting
Why Lincoln Electric? • Oxyfuel Cutting

Reduce Your Program Costs

Literature
Consumables, Professional &
Gear & Tools Skill Development MC16-30
Reduce Your Overall Training Time
Education
http://education.
lincolnelectric.com
Benefit from Broad Instructional Support
Booth & Fume
Solutions Welding &
Extraction Systems Cutting Curriculum
Participate in Train-the-Trainer Programs

Build a Stronger Workforce Robotics & Welding Training

Advanced Systems
Welding

Welding & Cutting

Equipment

Processes
U/LINC™ • SMAW
• GTAW
Welding and Cutting Curriculum • GMAW
• FCAW
Learning Made Simple. • Plasma Cutting
• Oxyfuel Cutting
Take the guesswork out of lesson planning and
curriculum development.
• Over 18,000 pages of curriculum, including Literature
lesson plans, videos, presentations, lab MC15-52
activities and student assessements www.ulinceducation.com

• Addresses welding safety to robotics and CNC

plasma cutting and everything in between
• Aligned with AWS SENSE and state
competencies and compatible with career
pathways and career development programs
• Can be articulated between high schools and
community colleges

http://education.lincolnelectric.com | 223
EDUCATION SOLUTIONS

Classroom and Lab Processes

• SMAW
Support Materials • GMAW
• FCAW
Expand Your Training Program
Product Number
• Project-Based Lessons are designed K3205-1 VRTEX® 360 New
Lessons in Arc Welding,
to education common core standards SMAW Curriculum
and American Welding Society K3206-1 VRTEX® 360 New
SENSE standards Lessons in Arc Welding,
GMAW Curriculum
• Curriculum provide best practices K3976-1 Robotic Welding
for blending traditional and virtual Project Based Lessons, Book 1
welding, classroom videos and more K3976-2 Robotic Welding
Project Based Lessons, Book 2
K4057-1 VRTEX® Project Based
Lesson 1 - Student Workbook
K4057-2 VRTEX® Project Based
Lesson 1 - Instructor Guide
K4058-1 VRTEX® Project Based
Lesson 2 - Student Workbook
K4143-1 Introduction to CNC
Plasma Arc Cutting

Literature
http://education.
lincolnelectric.com

Education Resource and Purchasing Portal

Capture Cost Savings for Your Program

Solve Welding Education Challenges

• Stretch budget dollars
• Access quality products
• Locate training resources

Save on Top Quality Products

• Lincoln Electric electrode as low
Electrode and Wire Welding Gear Welding Tools Welding Guns
as $1.00 / lb and Torches

• Special pricing on welding gear,

tools and accessories
• Traceable order status and history
• FREE shipping on orders over $500
in contiguous United States
Torches Tips, Nozzles, Free educational Resources Fume Extraction Filters
Cable Liners and More - Posters, Welding Guides,
Lesson Plans

https://lincolnelectric.com/edportal

224 | http://education.lincolnelectric.com
EDUCATION SOLUTIONS

Lincoln Electric Welding Technology Processes & Programs

• SMAW
& Training Center • GTAW
• GMAW
Knowledge for a New Era • FCAW
• SAW
• Committed to the transfer of knowledge to anyone • ASME and API Pipe
• AWS CWI preparation
desiring to learn the craft and science of welding • Plasma Cutting
• Training the next generation of welders using the • Oxyfuel Cutting
• Welding Training Systems
technology and tools demanded by manufacturers
• Train-the-Trainer
and contractors today Professional Development
• Welding educator train-the-trainer professional • Distributor Training
• Welding Design Seminars
development workshops and seminars • Alloy Seminars
• AWS CWI preparation training • Specialized Workshops

• Welding design, alloy and other seminars

for welding engineers Literature
MC17-31

Contact us at :
P: 216-383-2259 E: [email protected]

Lincoln Electric Education Processes and Qualifications

• SMAW
Partner Schools (LEEPS) • GTAW
• GMAW
A LEEP Forward for Welding Educators • FCAW
• SAW
• Instructors earn qualifications and schools earn • CNC Cutting
• Robotics
the ability to host profit-producing events. • Welding Training Systems
• Supports welding instructors at every level – from • AWS CRAW, CWI, CWE
junior high school to technical college and beyond
• Industrial partners value the certification and
training provided by Lincoln Electric
• Instructor certification provides accountability to
validate program quality
• Research shows effective teachers are one of
the most important factors contributing to
student achievement

Custom Training EXAMPLES OF CUSTOM TRAINING PROGRAMS

Raise The Bar on Skill Development

• Our expert instructors can design a custom

results-oriented training program just for you
• Training can be conducted at your location
Welding Certification Knowledge / Skill Master New
or at our Welding Technology & Training Center Preparation Enhancement Welding Process(es)
in Cleveland, OH

Advanced Welding Industry / Plant Specific Increase Quality,

Equipment / Techniques Team Training Cost Savings & Production

http://education.lincolnelectric.com | 225
EDUCATION SOLUTIONS

VRTEX® 360+ (Dual User) Processes Simulated

• VRAW®
Virtual Reality Welding Simulation Trainer • SMAW: 6010, 6013 & 7018
• GTAW: with and without
filler metal
• Train two welders with one machine - includes
• GMAW: Short Arc, Spray,
two of each process device and coupons Pulse & STT® (pipe only)
• Realistic weld puddle is responsive to • FCAW: Gas-Shielded and
Self-Shielded
operator behavior
• Retractable SMAW stick stinger, GMAW/FCAW Input
gun and GTAW TIG torch, filler metal and
adaptive foot pedal devices
• Supports tee, flat plate, groove, 6 in. (152.4 mm) Literature
MC18-54
schedule 40 pipe, 2 in. (50.8 mm) XXS pipe and
pipe-on-plate
Supported by:
• Loaded with instructor and student aids, U/LINC™ curriculum
performance tracking and USB port for
offline grading, review and functionality
• AWS virtual bend test for multi-pass pipe welds
Product Product Input Power Input Current @ HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Rated Output in (mm) lb (kg)
VRTEX® 360+ (Dual User) K3434-1 115/230/1/50/60 4A@115 Machine: Machine:
One-Pak® Pkg in Re-usable Crate 2A@230 34.4 x 19.8 x 38.4 200 (90.7)
(874 x 503 x 975)
One-Pak® Pkg on Pallet K3434-3 PACKAGED WEIGHT:
Stand: Crate, Machine & Stand:
78.5 x 36 x 46.38 500 (226.8)
(1993.9H x 914.4W x 1178.1)

Crate:
48 x 48 x 48
(1219.2 x 1219.2 x 1219.2)

VRTEX® 360 (Single User) Processes Simulated

• VRAW®
Virtual Reality Welding Simulation Trainer • SMAW: 6010, 6013 & 7018
• GTAW: with and without
filler metal
• Realistic weld puddle is visually and audibly responsive • GMAW: Short Arc, Spray,
to operator behavior Pulse & STT® (pipe only)
• FCAW: Gas-Shielded and
• Retractable SMAW stick stinger, GMAW/FCAW gun and GTAW Self-Shielded
TIG torch, filler metal and adaptive foot pedal devices
Input
• Supports tee, flat plate, groove, 6 in. (152.4 mm) schedule
40 pipe, 2 in. (50.8 mm) XXS pipe and pipe-on-plate
• Loaded with instructor and student aids, performance tracking
Literature
and USB port for offline grading, review and functionality MC18-54
• AWS virtual bend test for multi-pass pipe welds
Supported by:
U/LINC™ curriculum

Product Product Input Power Input Current @ HxWxD Net Wt.

Name Number Voltage/Phase/Hertz Rated Output in (mm) lb (kg)
VRTEX® 360 K3433-1 115/230/1/50/60 4A@115 Machine: Machine:
One-Pak® Pkg in Re-usable Crate 2A@230 34.4 x 19.8 x 38.4 200 (90.7)
(874 x 503 x 975)
One-Pak® Pkg on Pallet K3433-3 PACKAGED WEIGHT:
Stand: Crate, Machine & Stand:
78.5 x 36 x 46.38 500 (226.8)
(1993.9 x 914.4 x 1178.1)

Crate:
48 x 48 x 48
(1219.2 x 1219.2 x 1219.2)

226 | http://education.lincolnelectric.com
EDUCATION SOLUTIONS

VRTEX® Transport™ Processes Simulated

• VRAW®
Virtual Reality Arc Welding Trainer • GTAW: with and without
filler metal
• GMAW: Short arc,
• Basic to Intermediate Trainer spray and pulse
• Ideal for basic training, recruitment • FCAW: Gas-shielded
and Self-shielded
and welder screening activities in • SMAW
education or industry
Input
• Uni-gun device adapts to SMAW,
GTAW, GMAW and FCAW welding
• Supports flat plate, tee joint and
Literature
butt joint welding MC18-54
• Replay and demo modes
• Realistic weld puddle is visually and audibly Supported by:
U/LINC™ curriculum
responsive to operator behavior
Product Product Input Power Input Current @ HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Rated Output in (mm) lb (kg)
VRTEX® Transport™ K3435-1 115/230/1/50/60 4A @ 115 Machine: Machine:
One-Pak® Pkg in Re-usable Crate 2A @ 230 34.4 x 19.8 x 38.4 200 (90.7)
(874 x 503 x 975)
One-Pak® Pkg on Pallet K3435-3 Monitor:
Coupon Stand w/Arm 20 (9)
17 x 12 x 14
(431 x 305 x 356) Crate:
155 (70.3)
Monitor:
14.4 x 15.4 x 8.0 Armrest:
(366 x 392 x 204) 7 (3.1)

Crate: PACKAGED WEIGHT:

48 x 48 x 48 Crate, Machine & Stand:
(1220 x 1220 x 1220) 400 (181.4)

VRTEX® Engage® Processes Simulated

• VRAW®
Virtual Reality Outreach Arc Welding Trainer • GMAW: Short arc,
spray and pulse
• FCAW: Self-shielded
• Portable system sets up anywhere to introduce • SMAW
skilled trades to students
• Provides an introductory environment that Input
incorporates STEM features, exposure to
welding safety, procedures and techniques
• Instant feedback and assessments
• Video demo and replay modes for
Literature
instructor or student review and analysis MC18-54
on the welding process
• USB port for offline grading, review and
functionality
Supported by:
• Sturdy rolling hardshell case, contains a U/LINC™ curriculum
complete learning environment

Product Product Input Power Input Current @ HxWxD Net Wt.

Name Number Voltage/Phase/Hertz Rated Output in (mm) lb (kg)
VRTEX® Engage® K4299-1 115/230/1/50/60 1A @ 115 24.5 x 19.37 x 12.22 55
Standard Frequency 0.5A @ 230 (622.3 x 492 x 310.4) (24.9)
Alternate Frequency 1 K4299-2
Alternate Frequency 2 K4299-3
Alternate Frequency 3 K4299-4

http://education.lincolnelectric.com | 227
EDUCATION SOLUTIONS

REALWELD® Processes
• GMAW: Short arc,
Advanced Welding Trainer spray and pulse
• FCAW: Gas-shielded
• SMAW
• Achieve a faster, more efficient employee
screening and training experience, more objective
scoring and reduced welding material costs Input

• Performance scoring provides immediate analysis

and evaluation of each weld
• Audio coaching provides corrective guidance
during welding, allowing the student to learn
in real time Literature
MC15-99
• Students practice multi-pass welding on 6 in.
and 18 in. fixtures in flat, horizontal, overhead
and vertical positions and lap, tee, groove and
Supported by:
flat plate joints U/LINC™ curriculum
Shown:
REALWELD® One-Pak® Pkg.
(K4344-3)

Product Product Input Power Input Current @ Operating Processor/ Hard Ports (qty) – HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Rated Output System Memory Drive USB 2.0/Ethernet in (mm) lb (kg)
REALWELD® K4344-1 115/230/1/50/60 3A @ 115VAC Windows® 7 Intel® High 2/2 Lowered: Net:
Base Model 1.5A @ 230VAC (32 bit) Core Performance 76.5 x 36 x 36 400 (882)
i3/4GB 256GB (1943 x 914 x 914) Crate:
Raised: 500 (1102)
101 x 36 x 36
One-Pak® K4344-3 (2540 x 914 x 914) Net:
Pkg. 625 (1378)
Crate:
700 (1544)
Set of 18 in. K4344-2 —
(457 mm)
Weld Fixtures
(qty 3)

Power Wave® C300 Education Processes

• DC SMAW
Ready-Pak® Package • DC GTAW
• GMAW
Multi-Process Student-Ready • Pulsed GMAW
Welding Package • FCAW

• Includes everything you need to get started to Output

teach MIG, TIG and stick welding
• Power Wave® C300 features an internal wire
feeder and an output range of 5-300 amps Input
• Efficient, power saving inverter platform
• CheckPoint™ and WeldScore™ monitoring tools
allow instructors to analyze weld data
Literature
• PowerConnect™ Technology automatically E5.100
adjusts to 200-600V, 50 or 60 Hz input power Supported by: U/LINC™ curriculum

Product Product Input Power Rated Output: Current/ Input Current @ Output HxWxD Net Wt.
Name Number Voltage/Phase/Hertz Voltage/Duty Cycle Rated Output Range in (mm) lb (kg)
Power Wave® C300(1) K2774-4 3-Ph 50/60: 300A/29V/40% 3-Ph/40% Duty Cycle: 5-300A DC 33 x 20 x 42 180
Educational 208/220-230/380-415/ 250/27V/100% 30/28/16/14/11A (838 x 508 x 1067) (81.6)
Ready-Pak® Pkg. 460/575 WFS:
1-Ph/40% Duty Cycle: 50-700 ipm
1-Ph 50/60: 53/48/29A (1.27-17.8
208/220-230 m/min)
WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov
228 | http://education.lincolnelectric.com
EDUCATION SOLUTIONS

ClassMate™ Robotic Welding Processes

• GMAW
Training System • Pulsed GMAW
• FCAW
Advance the Manufacturing Skills
of the Next Generation
Input
• Teaching robotics, crucial to global
competitiveness, can accelerate student
skills and employment rates
• Demonstrate and teach real-life industrial
robotic concepts, programming and welding Literature
E10.122
• Large, expandable work surface
• Intermediate and Advanced packages include
WeldPRO® Simulation Training Software
• Full-featured, operational robotic welding
power source can be used to produce
actual parts
• Integrated fume control, safety hardware,
welding fixture programming software
• Standard U/LINC® curriculum and
Supported by:
Train-the-Trainer programs help every U/LINC™ curriculum
instructor get up to speed fast

Product Product HxWxD Net Wt.

Name Number Input Power in (mm) lb (kg)
ClassMate™ AD2446-1 120V for Robot Operation and Programming Sides Expanded: 1000
Package 1: Basic 81.23 x 64.82 x 70 (453.6)
208/230/380-415/460/575/1/3/50/60 (2063 x 1646 x 1778)
Package 2: Intermediate AD2446-2 for Welding Operation
(w/ WeldPRO® software) Sides Folded:
Package 3: Advanced AD2446-3 81.23 x 32 x 70
(w/ WeldPRO® software & IR Vision) (2063 x 813 x 1778

Torchmate® 4400 and 4800 Processes

• CNC Plasma Cutting
Educational Packages
Add CNC Cutting to Your Program Literature
torchmate.com
• Ideal 2-D cutting platform for schools,
colleges and training centers
Supported by:
• Unlimited Software Licensing for students U/LINC™ curriculum
and one Master Teacher license
• Complete CNC system includes a plasma
cutter and motion controls
• Torchmate® Visual Machine Designer™
software makes it easy to understand
nesting, scanning, tool path concepts
and more

http://education.lincolnelectric.com | 229
EDUCATION SOLUTIONS

Standard Welding Gear Ready-Pak® Order Number

K4416-M
Keeping Students and Instructors Safe K4416-L
K4416-XL
K4416-2XL
• High quality PPE deliver comfort, durability K4416-3XL
and safety
K3096-1
• Features Traditional FR Cloth Jacket and Replacement Lincoln®
VIKING™ 1840 Black Helmet Industrial Duffle Bag

Literature
E14.743

NOTE: Welding gear and electrodes available at discounted prices to

qualified schools on the Education Resource and Purchasing Portal

Welding Booths and Tables Processes

(Dependent on welding
Create an Effective and Efficient power source)
• SMAW
Space for Teaching • GTAW
• GMAW
• All booth materials and designs • FCAW
meet AWS guidelines • Plasma Cutting
• Oxyfuel Cutting
• Freestanding weld booths can be
sized and configured to suit your
environment
Standard Weld Table Literature
Pipe Table
• Options include work table, welding (Half-Moon) E13.51
curtain, locking storage box
• Optimal 7.5 foot (2.3 m) Height
• Use against a wall or back-to-back
in any open space configuration
• Heavy-duty anti-reflective
panels reduce reflective glare

Product Interior Dimensions Exterior Overall Dimensions Height

Name Panel Construction Reinforced Frame W x D, ft (m) W x D, ft (m) ft (m)
Welding Booth 16 Gauge sheet metal 11 Gauge angle 4 x 4 (1.21 x 1.21) 4.5 x 5 (1.3 x 1.5) 7.5
Single (2.28)
5 x 5 (1.52 x 1.52) 5.5 x 6 (1.6 x 1.8)
6 x 6 (1.82 x 1.82) 6.5 x 7 (1.9 x 2.1)
Pipe Table
Standard Weld Table w/Stand - 32 in. Contact us for additonal details
Extended Weld Table w/Stand - 47 in.
Weld Locker
Contact us for additonal details
Single

230 | http://education.lincolnelectric.com
EDUCATION SOLUTIONS

Teaching Aid Toolbox Processes

• SMAW
Bring Your Classroom to Life • GTAW
• GMAW
• FCAW
• Enhance the learning experience – Augment • Plasma Cutting
learning with visual and tactile examples in the • Oxyfuel Cutting
classroom
• Curriculum in a cabinet – Comprehensive array Literature
of welding and cutting tools, cutaway Harris® MC17-47
gas regulator and oxyfuel torch
• Build on the basics - Fully supported with
Lincoln Electric U/LINC® curriculum
• Bridge the classroom and the lab – Illustrate
process principles in the classroom.
• Boost learning to the next level with sample
welds, joints, cuts, and equipment
• Includes a set of weld discontinuity flashcards

Product Product HxWxD Net Wt.

Name Number in (mm) lb (kg)
Teaching Aid Toolbox with Contents K4442-1 26.5 x 18 x 34.5 125
(673.1 x 457.2 x 50.8) (56.7)
Replacement Cutaway Harris® Oxyfuel Torch K4442-2 18 x 6 x 2 4
(1 included with K4442-1 Toolbox (457.2 x 152.4 x 50.8 (1.8)
Replacement Cutaway Harris® Gas Regulator K4442-3 6 x 7.5 x 5 4
(1 included with K4442-1 Toolbox) (152.4 x 190.5 x 127) (1.8)

http://education.lincolnelectric.com | 231
EDUCATION SOLUTIONS

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

VRTEX® 360+ (Dual User) VRTEX® Transport™

One-Pak Packages (K3434-1; K3434-3)
®
One-Pak® Package (K3435-1; K3435-3)
• Virtual Welding Machine • Virtual Welding Machine
• 2 Welding Stands • Tabletop Stand
• 2 Welding Helmets • Arm Rest
• 2 GTAW Torches and Filler Metal Devices and • Welding Helmet
Adaptive Foot Pedals • Uni-gun with SMAW, GTAW, GMAW/FCAW
• 2 GMAW/FCAW Guns attachments, GTAW filler metal device and
• 2 Retractable SMAW Welding Devices adaptive foot pedal
• 2 Each Coupons • Coupons
- Practice Plate - Practice Plate
- Pad - Pad Shown:
- Lap Joint REALWELD®
- Lap Joint One-Pak® Package
- Groove Joint 3/8 in. (9.5 mm) - Tee Joint (K4344-3)
- Groove Joint 2 in. (50.8 mm) diameter XXS Pipe - Groove Joint 3/8 in. (9.5 mm)
- Groove Joint 6 in. (152.4 mm) diameter Sch 40 Pipe - Curriculum
- Pipe-on-Plate - Project Based Lessons
- Steel, Stainless Steel and Aluminum Materials,
• Curriculum Demo and Replay Modes, Multiple Environments,
• Project-Based Lessons for Student and Instructor Multiple Languages
- Steel, Stainless Steel and Aluminum Materials,
Virtual Bend Test, Demo and Replay Modes,
Multiple Environments, Multiple Languages

VRTEX® Engage®
System (K4299-1)
VRTEX® 360 (Single User)
• 115 volt input cable
One-Pak® Packages (K3433-1 ; K3433-3))
• GMAW/FCAW gun device
• Virtual Welding Machine
• Uni-gun with SMAW, GMAW/FCAW attachments
• Welding Stand
• Coupons
• Welding Helmet
- Practice Plate
• GTAW Torch and Filler Metal Devices
and Adaptive Foot Pedal - Pad
• GMAW/FCAW - Tee Joint
• Retractable SMAW Welding Device - Groove Joint, 3/8 in. (9.5 mm)
• Coupons • Lesson Mode Includes Safety and Measurement
- Practice Plate Activities
- Pad - Steel Material, Demo and Replay Modes,
- Lap Joint Multiple Languages
- Tee Joint
- Groove Joint 3/8 in. (9.5 mm)
- Groove Joint 2 in. (50.8 mm) diameter XXS Pipe
- Groove Joint 6 in. (152.4 mm) diameter Sch 40 Pipe
- Pipe-on-Plate
• Curriculum
• Project-Based Lessons for Student and Instructor
- Steel, Stainless Steel and Aluminum Materials,
Virtual Bend Test, Demo and Replay Modes,
Multiple Environments

232 | http://education.lincolnelectric.com
EDUCATION SOLUTIONS

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

REALWELD® ClassMate™ Robotic Welding Training System

Base System (K4344-1) Package 1: Basic (AD2446-1)
• REALWELD® System • Robotic 3-in-1 Welding Fixture
• GMAW gun and SMAW Electrode Holder • Miniflex ® Welding Fume Extractor
• Fixtures - 6 in. (152 mm) - Set of 3 • EN 20 Extraction Nozzle
• 17 in. (432 mm Protective Screen Covers • Custom Lettering Program
• Calibration Tools • Robotic Welding Project Based Lesson
• Basic Robotic Programming Class
One-Pak Package® (K4344-3)
• Everything listed above Package 2: Intermediate (AD2446-2)
Shown:
• Power Wave® C300 welding power source (K2675-2) • Includes everything above (AD2446-1) Standard Welding Gear
• Understorage Cart (K2734-2) • WeldPRO® Training Program and Software Ready-Pak®

• Miniflex ® fume extraction system (K3972-3)

• EN 20 Extraction Nozzle (K2389-5) Package 3: Advanced (AD2446-3)
- Includes everything in AD2446-2
- IRVision® 2D vision camera system

Power Wave® C300

Educational Ready-Pak® Package (K2774-4) Torchmate® 4400 & 4800 Educational Systems
• Drive Roll Kit, 0.035/0.045 in. (0.9/1.2 mm) System Includes
• Input Cord, 10 ft. (3.0 m) • Waterbed Table
• Work Lead & Clamp, 10 ft. (3.0 m) • True Arc Voltage Height Control
• Power Wave® C300 Undercarriage • USB Electronics Box (cabling included)
• Magnum® PRO Curve™ 300 Gun Package • Torchmate® Visual Machine Designer™ Software
• Harris® Gas Regulator/Flowmeter & 10 ft. (3.0 m)
Hose Kit (3100211)
• TIG Torch Twist Mate™ to Stud Adapter Cable
with 2 ft. (0.61 m) Gas Hose
• PTA-17 Pro-Torch™ TIG Torch
Standard Welding Gear Ready-Pak®
Includes
• Twist Mate™ Torch Adapter
• Lincoln® Industrial Duffle Bag
• Parts Kits for PTA-17 Series Torches
• Industrial Passive Welding Helmet
• Foot Amptrol™
• Traditional Khaki FR Cloth Jacket
• Stick Electrode Holder and Cable
• Traditional MIG/Stick Welding Gloves
• Lincoln® Startlite® Clear Safety Glasses
• FR Doo Rag
• Spring Handle Chipping Hammer
• Radius™ Welding Pliers
• Radius 3 x19 Carbon Steel Wire Brush

http://education.lincolnelectric.com | 233
EDUCATION SOLUTIONS

What’s Included
Base Model/Unit Includes » Some base models include a set of specific standard accessories
One-Pak® Packages » Assembly required
Ready-Pak® Packages » Fully assembled

Teaching Aid Toolbox DRAWER 3 - GMAW / FCAW, con’t.

Base Model (K4442-1) • Magnum® PRO Contact Tip 550A, 0.035 in Dia.
DRAWER 1 - SMAW • Magnum® PRO Contact Tip, 350A,
• T300 Electrode Holder Tapered, 0.035 in Dia.
• EH-305HD Magnum® Electrode Holder • Magnum® PRO 350 Gas Diffuser Thread-On
• 200A Electrode Holder • Magnum® PRO Barrel 550 Nozzle Assembly 550A,
Thread-On, Recessed, 5/8 in. ID Shown:
• GC-300 Work Clamp Drawer 1 - SMAW
• Magnum® PRO MIG Gun Diffuser, 550A, Thread-On
• 3/32 in. (2.4 mm) Bare Stick Electrode Rod
• 1/8 in. (3.2 mm) Bare Stick Electrode Rod
DRAWER 4 - CUTTING
• 5/32 in. (4.0 mm) Bare Stick Electrode Rod
• Tomahawk ® LC40 Plasma Cutting Torch Assembly
• Excalibur ® 7018 MR 3/32 in. (2.4 mm) 1 lb Tube Stick
Electrode • Tomahawk ® LC40 Electrode
• Tomahawk ® LC40 Swirl Ring
DRAWER 2 - GTAW • Tomahawk ® LC40 Nozzle (40 A)
• PTA-17V Torch Body • Cutaway Harris® Oxyfuel Torch Shown:
Drawer 2 - GTAW
• PTA-17V Torch Body • Cutaway Harris® Gas Regulator
• PTA-17F Torch Body • Acetylene Heating Assembly
• PTA-17 Torch Handle • Acetylene Two-Piece Preheat Tip
• PTA-17 3/32 in. (2.4 mm) Collet • Cutting Tip
• PTA-17 3/32 in. (2.4 mm) Collet Body
• PTA-17 Backcap, Long DRAWER 5 - WELD SAMPLES
• PTA-17 Alumina Nozzle #6 • Butt Joint, 2 x 6 in. (50.8 x 152.4 mm) 10ga
• GLK-3 Basic TIG Kit • Corner Joint, 2 x 6 in. (50.8 x 152.4 mm) 10ga Shown:
Drawer 3 - GMAW/FCAW
• Edge Joint, 2 x 6 in. (50.8 x 152.4 mm) 10ga
DRAWER 3 - GMAW / FCAW • Lap Joint, 2 x 6 in. (50.8 x 152.4 mm) 10ga
• Magnum® PRO 550 Assembly • Tee Joint, 2 x 6 in. (50.8 x 152.4 mm) 10ga
• Magnum® PRO 250L Assembly • Three Pass T Joint 100/75/50:
1/4 x 3 x 8 in. (6.35 x 76.2 x 203.2 mm)
• Flux-Cored/MIG Wire Drive Roll,
0.035-.045 in. (0.9-1.1 mm) Knurled • 6 Pass Groove 100/83/66/50/33/16:
3/8 x 8 x 7 in. (9.53 x 203.2 x 177.8 mm)
• Drive Roll Kit Combination,
0.035/.045 in. (0.9-1.1 mm) Solid Wire Smooth • Discontinuities Flash Cards
Shown:
Drawer 4 - Cutting
• Magnum® PRO MIG Gun Diffuser, 550A, Slip-On
• Magnum® PRO Gas Nozzle 550A,
Slip-On, Flush, 3/4 in. ID
• Magnum® PRO Gas Nozzle 350A,
Thread-On, Flush, 1/2 in. ID
• Magnum® PRO Gas Nozzle 350A,
Thread-On, Recessed, 1/2 in. ID
• Magnum® PRO Bottleneck Gas Nozzle 350A,
Thread-on, Flush, 1/2 in. ID Shown:
Drawer 5 - Weld Samples
• Magnum® PRO Gas Nozzle 350A,
1/8 In. Stickout, Thread-on, 1/2 in. ID
• Magnum® PRO Gas Nozzle 350A,
Flush, Thread-On, 3/8 in. ID
• Magnum® PRO MIG Gun Diffuser, 350A, Slip-On
• Magnum® PRO Gas Nozzle 350A,
Flush, Slip-On, 1/2 in. ID
• Magnum® PRO MIG Gun Diffuser, 350A,
Extended Reach, Thread-On
• Magnum® PRO Gas Nozzle 350A,
Extended Reach, Thread-On, Recessed, 1/2 in. ID

234 | http://education.lincolnelectric.com
DRIVE AND CABLE ACCESSORIES
DRIVE AND CABLE ACCESSORIES

Accessories
Feed Plate Gun Adapters
FEED PLATE GUN ADAPTERS COMPATIBLE WITH 10-SERIES, LF-SERIES AND LN-25 PRO FEEDERS

K1500-1 K1500-2 K1500-3 K1500-4 K1500-5 Magnum® PRO Fast-Mate™

for Lincoln Electric for Tweco® #2 - #4 for Tweco® #5 for Miller® Electric for OXO® Compatible
gun power pins gun power pins gun power pins gun power pins gun power pins Gun Connector Kits
K489-7
Compatible Compatible Compatible Compatible (10-series, LF-series, LN-25 PRO)
Gun Connector Kits Gun Connector Kits Gun Connector Kits Gun Connector Kits
K466-1 K466-10 K613-7 K466-3 K489-1
(LN-7, 8, 9)
K613-1 K466-2 K613-2 K613-3
K613-6 K466-6 K489-2
K466-8 (LN-25)
K489-8
(Power MIG with 250L guns)

FEED PLATE GUN ADAPTERS COMPATIBLE WITH FLEX FEED™ AND POWER FEED® SERIES FEEDERS

K3344-1 K3345-1 K3346-1 K3347-1 K3348-1 K3349-1

For Lincoln Electric for Tweco® #2 - #4 for Tweco® #5 for Miller® Electric for OXO® Magnum® Fast-Mate™
gun power pins gun power pins gun power pin gun power pins gun power pins
Requires use of
Compatible Compatible Compatible Compatible K3344-1
Gun Connector Kits Gun Connector Kits Gun Connector Kits Gun Connector Kits
K466-1 K466-10 K613-7 K466-3
K613-1 K466-2 K613-2 K613-3
K613-6 K466-6
K466-8

Feed Plate Gun Adapters » Tweco® is a registered trademark of Victor Technologies. Miller® and OXO® is a registered trademark of Miller Electric Mfg. Co.

236 | www.lincolnelectric.com
DRIVE AND CABLE ACCESSORIES

Accessories
Weld Power Cables
Product Product Length
Name Number Description Connection ft (m)
Weld Power Cables K1840-10 Weld Power Cable, 1/0, 350A, 60% duty cycle Twist Mate™ to Lug 10 (3.1)
K1842-10 Weld Power Cable, 3/0, 600A, 60% duty cycle Lug to Lug 10 (3.1)
K1842-35 35 (10.7)
K1842-60 60 (18.3)
K1842-110 Weld Power Cable, 4/0, 600A, 60% duty cycle 110 (33.5)
K1841-25 Weld Power Cable, 1/0, 350A, 60% duty cycle Twist Mate to Twist Mate
™ ™
25 (7.6)
K1841-50 Weld Power Cable, 2/0, 350A, 60% duty cycle 50 (15.2)
K2163-35(1) Weld Power Cable, 4/0 Lug to Lug 35 (10.7)
K2163-60 (1)
60 (18.3)
K1796-25 Coaxial Weld Power Cable, 1/0, 350A, 60% duty cycle Lug to Lug 25 (7.6)
K1796-50 50 (15.2)
K1796-75 Coaxial Weld Power Cable, 1/0, 325A, 60% duty cycle 75 (22.8)
K1796-100 Coaxial Weld Power Cable, 1/0, 300A, 60% duty cycle 100 (30.4)
K2593-100 Coaxial Weld Power Cable, #1, 250A, 100% duty cycle Lug to Lug 100 (30.4)

Weld Cable Connectors

Product Product
Name Number Description
Plug K852-25 Twist Mate™ Plug for #6 - #4 Cable
K852-50 Twist Mate™ Plug for #2 - #1 Cable
K852-70 Twist Mate™ Plug for 1/0 & 2/0 Cable
K852-95 Twist Mate™ Plug for 3/0 & 4/0 Cable
K3416-70 Tweco® Plug for 1/0 & 2/0 Cable
K3416-90 Tweco® Plug for 3/0 & 4/0 Cable
Receptacle K1759-70 Twist Mate™ Receptacle for 1/0 & 2/0 Cable
K1759-95 Twist Mate™ Receptacle for 3/0 & 4/0 Cable
K3417-70 Tweco® Receptacle for 1/0 & 2/0 Cable
K3417-90 Tweco® Receptacle for 3/0 & 4/0 Cable
Electrode Holder K909-6 T300 Electrode Holder (for DC Welder Only)
K909-7 EH-305HD Electrode Holder, 300A, 60% Duty Cycle
K909-8 EH-405HD Electrode Holder, 400A, 60% Duty Cycle
Ground Clamp K910-1 GC-300 Work Clamp, 300A, 60% Duty Cycle
K910-2 GC-500 Work Clamp, 500A, 60% Duty Cycle
Other K2487-1 Insulated CT40FS, Tweco® to Lug

Weld Power Cables » (1)Two cables per package.

www.lincolnelectric.com | 237
DRIVE AND CABLE ACCESSORIES

Accessories
Control Cables and Adapters
Product Product Length
Name Number Description Connection Use ft (m)
Wire Feeder Control Cables K1501-10 Wire Feeder Control Cable Male 14-pin to Female 9-pin LN-10, DH-10 10 (3.1)
K1818-10 Male 14-pin to Female 6-pin LN-7 10 (3.1)
K1819-10 Male 14-pin to Female 8-pin LN-742, LN-25 10 (3.1)
K1820-10 Male 14-pin to Female 9-pin LN-8, LN-9, NA-3, 10 (3.1)
NA-4, NA-5
K1822-25 — LT-7 25 (7.6)
K2393-1 Male 14-pin to Female 8-pin LN-23P (K316L-2) 25 (7.6)
K2393-2 75 (22.8)
Extensions and Adapters K1797-10 Wire Feeder Control Cable Extension Male 14-pin to Female 14-pin May require K1501-10, 10 (3.1)
K1818-10, K1819-10 or
K1797-25 K1820-10, depending 25 (7.6)
K1797-50 on the feeder. 50 (15.2)
LN-15, FlexFeed,
K1797-100 LF-72, LF-74, LN-25 100 (30.4)
PRO Dual Power
K1798 Adapter Cable Male 14-pin Control Terminal Strip to Female — —
Cable to Terminal Strip of Power 14-pin
Source
ArcLink®/Linc-Net™ Control Cables K1543-8 ArcLink®/Linc-Net™ Control Cable Male 5-pin to Female 5-pin For Power Wave®/ 8 (2.4)
Power Feed® Systems,
K1543-16 Power Feed 25M, 16 (4.9)
K1543-25 Power Feed 84 25 (7.6)
K1543-50 50 (15.2)
K1543-100 100 (30.4)
K2683-25 Heavy Duty ArcLink®/Linc-Net™ 25 (7.6)
Control Cable
K2683-50 50 (15.2)
K2683-100 100 (30.4)
Submerged Arc/Automation K1785-2 Heavy Duty Control Cable Male 14-pin to Female 14-pin For synchronizing 1.5 (0.46)
Power Wave® AC/DC
K1785-4 1000® SD units and 4 (1.2)
K1785-8 connecting MAXsa™ 8 (2.4)
Feed Heads and
K1785-12 MAXsa™ Controllers. 12 (3.6)
K1785-16 For use with 16 (4.9)
FANUC® arms having
K1785-25 integrated cable. 25 (7.6)
K1785-50 For connecting 50 (15.2)
Control Unit to Wire
K1785-100 Drive in LN-10, DH-10 100 (30.4)
Boom applications.
K2709-25 Wire Drive Control Cable Male 14-pin to Female 14-pin For external dress of 25 (7.6)
FANUC® robotic arm
K2709-50 or hard automation. 50 (15.2)
K2709-100 100 (30.4)

238 | www.lincolnelectric.com
DRIVE AND CABLE ACCESSORIES

Accessories » Drive Roll and Wire Guide Kits

Product Product Description/Wire Product Product Description/Wire

Name Number Size, in (mm) Wire Feeders Name Number Size, in (mm) Wire Feeders
2-ROLL WIRE DRIVE SYSTEMS 4-ROLL WIRE DRIVE SYSTEMS
Solid Wire KP1696-030S 0.023-0.030 Activ8 ™
Solid Wire, KP1505-030S 0.023-0.030 AutoDrive® 4R100
(includes (0.6-0.8) Smooth V (0.6-0.8)
stainless steel) LF-72 Groove AutoDrive® 4R200
KP1696-035S 0.035 (0.9) KP1505-035S 0.035 (0.9)
KP1696-1 0.035, 0.045 LN-25 PRO KP1505-040S 0.040 (1.0) DH-10
(0.9, 1.2)
LN-25 PRO KP1505-045S 0.045 (1.2) FlexFeed™ 74 HT
KP1696-2 0.040 (1.0) Dual Power KP1505-052S 0.052 (1.4)
KP1696-045S 0.045 (1.2) FlexFeed™ 84 Single
LN-25X KP1505-1/16S 1/16 (1.6)
KP1696-052S 0.052 (1.4) FlexFeed™ 84 Dual
Power Feed® 25M KP1505-1 0.035, 0.045
KP1696-1/16S 1/16 (1.6) (0.9, 1.2) LF-74
Cored Wire KP1697-035C 0.030-0.035 POWER MIG® 216 KP1505-2 0.040 (1.0)
(0.8-0.9) LN-10
POWER MIG® 256 Cored Steel KP1505-035C 0.030-0.035
KP1697-045C 0.040-0.045 Wire, Knurled (0.8-0.9) Power Feed® 10M
(1.0-1.2) POWER MIG® V Groove
(Knurled V KP1505-045C 0.040-0.045
KP1697-052C 0.052 (1.4) 350MP (1.0-1.2) Power Feed®
Groove with 10M Dual
KP1697-1/16C 1/16 (1.6) matching KP1505-052C(3) 0.052 (1.4)
Smooth U Power Feed® 10R
KP1697-068 0.068-0.072 Groove) KP1505-1/16C(3) 1/16 (1.6)
(1.7-1.8) Power Feed®
KP1505-7/64H(2)(3) 7/64 (2.8)
KP1697-5/64 5/64 (2.0) Hardfacing 84 Single

KP1697-3/32(1) 3/32 (2.4) Power Feed®

Aluminum KP1695-035A 0.035 (0.9) Cored or Solid KP1505-035C 0.030-0.035 84 Dual
Wire Steel Wire, (0.8-0.9)
KP1695-040A 0.040 (1.0) Knurled V
Groove KP1505-045C 0.040-0.045
KP1695-3/64A 3/64 (1.2) (1.0-1.2)
KP1695-1/16A 1/16 (1.6) KP1505-052C(3) 0.052 (1.4)
Solid Wire KP2529-1 0.025/0.030 POWER MIG 140C ®
KP1505-1/16C(3) 1/16 (1.6)
(0.6/0.8)
POWER MIG 180C ®
KP1505-068 (3)
0.068-0.072
KP2529-2 0.035 (0.9) (1.7-1.8)
Cored Wire KP2529-3 0.030/0.045 POWER MIG®
180 Dual KP1505-5/64(3) 5/64 (2.0)
(0.8/ 1.2)
KP1505-3/32 (3)
3/32 (2.4)
POWER MIG®
210 MP KP1505-7/64(2)(3) 7/64 (2.8)
KP1505-.120 (2)(3)
0.120 (3.2)
Hardfacing KP1505-7/64C 7/64 (2.8)
Product Product Description/Wire Wires, Knurled,
Name Number Size, in (mm) Wire Feeders Smooth V KP1505-7/64H (2)(3)
7/64 (2.8)
Groove Hardfacing
4-ROLL WIRE DRIVE SYSTEMS
Solid Wire KP4335-035S 0.035 (0.9) AutoDrive® S
KP4335-040S 0.040 (1.0)
KP4335-045S 0.045 (1.2) Aluminum KP1507-035A 0.035 (0.9)
Aluminum KP4335-035A 0.035 (0.9) Wire, Smooth
U Groove KP1507-040A 0.040 (1.0)
Wire
KP4335-364A 3/64 (1.2) KP1507-3/64A 3/64 (1.2)
KP4335-116A 1/16 (1.6) KP1507-1/16A(3) 1/16 (1.6)
Aluminum KP4414-035A 0.035 (0.9) AutoDrive SA®
KP1507-3/32A (2)
3/32 (2.4)
Wire
KP4414-364A 3/64 (1.2) Solid Wire, KP1505-035R 0.035 (0.9)
KP4414-116A 1/16 (1.6) Extended Life
KP1505-040R 0.040 (1.0)
KP1505-045R 0.045 (1.2)
KP1505-052R 0.052 (1.4)

(1)
Not for use with the LF-72. (2)
Not for use with the LF-74. (3)
Not for use with the AutoDrive 4R100.

www.lincolnelectric.com | 239
DRIVE AND CABLE ACCESSORIES

Accessories » Drive Roll and Guide Tube Kits

Product Product Description/Wire Size, Product Product Description/Wire Size,

Name Number in (mm) Wire Feeders Name Number in (mm) Wire Feeders
2-ROLL WIRE DRIVE SYSTEMS 2-ROLL WIRE DRIVE SYSTEMS
Solid Wire KP653-025S 0.023-0.025 (0.6-0.6) LN-7 GMA Solid Wire KP1899-1 3/32-7/32 (2.4-5.6) NA-3S
Drive Roll
KP653-030S 0.030 (0.8) KP1899-2 1/16, 5/64, 3/32 NA-4
LN-23P
(1.6, 2.0, 2.4)
KP653-035S 0.035-0.040 (0.9-1.0)
LN-25 KP1899-3 0.035, 0.045, 0.052 NA-5
KP653-052S 0.045-0.052 (1.2-1.4) (0.9, 1.2, 1.4)
Cored Wire KP653-035C 0.035 (0.9) Cored Wire KP1899-4 0.045-0.052 (1.0-1.4)
KP653-052C 0.045-0.052 (1.2-1.4) Drive Roll
Knurled KP1885-1 3/32-7/32 (2.4-5.6)
Drive Roll
Solid or KP653-1/16 1/16 (1.6) KP1886-1 1/16-3/32 (1.6-2.4)
Cored Wire
KP653-3/32 (2)
0.068-3/32 (1.7-2.4)

Outgoing KP1963-1 3/32-7/32 (2.4-5.6)

Guide
Hardfacing KP653-7/64H (1)
7/64 (2.8)
Incoming KP2116-2 3/32-7/32 (2.4-5.6)
Aluminum KP654-035A 0.035 (0.9) Guide
Wire
KP654-3/64A 3/64 (1.2)
KP654-1/16 1/16 (1.6)
Solid Wire KP502-052 0.040, 0.045-0.052 LN-8
(1.0, 1.2-1.4)
LN-9
KP502-1/16 1/16 (1.6)
Cored Wire KP502-052C 0.045-0.052 (1.0-1.4)
KP502-1/16C 1/16-0.062 (1.6-1.6)
KP502-120 7/64-0.120 (2.8-3.0)
Solid or KP502-3/32 0.068-3/32 (1.7-2.4)
Cored Wire
Hardfacing KP502-7/64H 7/64 (2.8)

(1)
Not for use with the LN-25 PRO and LN-25 PRO Dual Power. (2)
For LN-7 only.

240 | www.lincolnelectric.com
SAFETY

Welding Safety Checklist

Hazard Factors To Consider Precaution Summary

Electric Shock • Wetness • Insulate welder from workpiece and ground using dry insulation. Rubber mat or dry wood.
Can Kill
• Welder in or on workpiece • Wear dry, hole-free gloves. (Change as necessary to keep dry.)
• Electrode holder and • Do not touch electrically “hot” parts or electrode with bare skin or wet clothing
cable insulation
• If wet area and welder cannot be insulated from workpiece with dry insulation, use a
semiautomatic, constant-voltage welder or stick welder with voltage reducing device.
• Keep electrode holder and cable insulation in good condition. Do not use if insulation
damaged or missing.
Fumes and Gases • Confined area • Use ventilation or exhaust to keep air breathing zone clear, comfortable.
Can Be Dangerous
• Positioning of welder’s head • Use helmet and positioning of head to keep fumes clear of the breathing zone.
• Lack of General ventilation • Read warnings on electrode container and Safety Data Sheet (SDS)
for electrode
• Electrode types
(i.e.: manganese, chromium, • Provide adequate ventilation to ensure airborne exposures remain below
etc. – see SDS) applicable limits.
• Use special care when welding in a confined area.
• Do not weld unless ventilation is adequate.
• Use a respirator unless exposure assessments indicate otherwise.
Welding Sparks • Containers which have • Do not weld on containers which have held combustible materials (unless strict AWS F4.1
Can Cause Fire held combustibles procedures are followed). Check before welding.
or Explosion
• Flammable materials • Remove flammable materials from welding area or shield from sparks, heat.
• Keep a fire watch in area during and after welding.
• Wear fire retardant clothing and hat. Use earplugs when welding overhead.
Arc Rays Can • Process: Gas-shielded arc • Select a filter lens which is adequate for your welding process under ANSI Z49.1, Section 4.
Burn Eyes most severe
• Always use helmet when welding.
and Skin
• Provide non-flammable shielding to protect others.
• Wear clothing which protects skin while welding.

Arc Welding Fumes and Gases

The fume plume contains solid particles from the consumables, base metal, Your work area has adequate ventilation
and base metal coating. For common mild steel arc welding, depending on when there is enough ventilation and/
the amount and length of exposure to these fumes, most immediate or short or exhaust to control worker exposure to
term effects are temporary, and include symptoms of burning eyes and skin, hazardous materials in the welding fumes
dizziness, nausea, and fever. Long-term exposure to welding fumes can lead and gases so the applicable limits for those
to siderosis (iron deposits in the lungs) and may affect pulmonary function. materials is not exceeded. See the SDS for
Bronchitis and some lung fibrosis have been reported. the legal limits, the OSHA PEL (Permissible
Some compounds which may be in welding fume, and reported health effects Exposure Limit), and the recommended
of overexposure are below. See the SDS for the consumable product used for guideline, the ACGIH TLV (Threshold Limit
specific information. Value). Confirm that if the worker exposure
does not exceed the applicable exposure
• Barium may cause severe stomach pain, slow pulse rate; irregular limit for compounds in the fumes and gases
heartbeat, ringing of the ears, convulsion and muscle spasms. In extreme by having an industrial hygienist take and
cases can cause death. analyze a sample of the breathing air. A
• Cadmium fumes can be fatal even under brief overexposures, with respirator may be required if exposure cannot be controlled to the PEL or TLV.
symptoms much like metal fume fever. Read the product label and material safety data sheet for the electrode
• Chromium and its compounds­­are on the IARC (International Agency for posted in the work place or in the electrode or flux container to see what
Research on Cancer) and NTP (National Toxicology Program) lists as fumes can be reasonably expected from use of the product and to determine
posing a cancer risk to humans. Some forms of these metals are known or if special ventilation is needed. Know what the base metal is, and determine
suspected to cause lung cancer in processes other than welding and asthma if these is any paint, plating, or coating that could expose you to toxic fumes
has been reported. and/or gases. Remove it from the metal being welded, if possible.
• Manganese: Manganese overexposure may affect the central nervous If you start to feel uncomfortable, dizzy or nauseous, you may be overexposed
system, resulting in poor coordination, difficulty in speaking, and tremor of to fumes and gases, or suffering from oxygen deficiency. Stop welding and
arms or legs. This condition is considered irreversible. get some fresh air immediately. Notify your supervisor and co-workers so
the situation can be corrected and other workers can avoid the hazard. Be
• Nickel: Nickel and its compounds are on the IARC (International Agency for
sure you are following these safe practices, the consumable labeling and SDS
Research on Cancer) and NTP (National Toxicology Program) lists as posing
and improve the ventilation in your area. Do not continue welding until the
a cancer risk to humans.
situation has been corrected.
• Silica: Overexposure can cause severe lung damage (silicosis). Crystalline
silica is present in submerged arc flux.
• Zinc: Overexposure to zinc may cause metal fume fever with symptoms
similar to the common flu.

www.lincolnelectric.com | 241
INDEX

A E I (cont)
AC 225™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Education Resource & Purchasing Portal Idealarc® DC400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
AC/DC 225/125™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 (Education Solutions). . . . . . . . . . . . . . . . . . . . . . . . . 224 Idealarc® DC600. . . . . . . . . . . . . . . . . . . . . . . . . . . . 37, 110
Activ8® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Education Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . 222-234 Idealarc® DC1000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Activ8X™ with CrossLinc™ Technology. . . . . . . . . . . . 86 Electric Hand Lifter. . . . . . . . . . . . . . . . . . . . . . . . . . . 136 Idealarc® DC1500. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Advanced Process Welders . . . . . . . . . . . . . . . . . . . . . 45-56 Electrode Holders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 Idealarc® R3R-400. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Air Vantage® 566 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Environmental Solutions (Automation Solutions).. 197 Idealarc® R3R-500. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Air Vantage® 566 Hydraulic . . . . . . . . . . . . . . . . . . . . . 78 Engine Drives: Commercial. . . . . . . . . . . . . . . . . . . . . . . 63-71 Infinity Pak® Dispensing System. . . . . . . . . . . . . . . . 188
All-American™ Doo Rag. . . . . . . . . . . . . . . . . . . . . . . . . 131 Engine Drives: Industrial. . . . . . . . . . . . . . . . . . . . . . . . 72-84 Innershield® Guns. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
All-American™ Welding Cap. . . . . . . . . . . . . . . . . . . . . 131 Invertec® STT® II. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Alloy Welding Brass Wire Brushes. . . . . . . . . . . . . . . 137 F Invertec® V155-S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 11
Arc Tracker®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Face Shield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Invertec® V160-T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Aspect® 375 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Facial Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Invertec® V275-S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Automation Solutions . . . . . . . . . . . . . . . . . . . . . . . . 192-199 Finish Line™ Clear Safety Glasses . . . . . . . . . . . . . . . . 133 Invertec® V275-S Inverter Racks. . . . . . . . . . . . . . . . . . 58
Finish Line™ Outdoor Safety Glasses. . . . . . . . . . . . . 134 Invertec® V350 PRO . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
B Feed Plate Gun Adapters . . . . . . . . . . . . . . . . . . . . . . 236 Invertec® V350 PRO Inverter Racks. . . . . . . . . . . . . . . 58
Beanies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 FlexCut® 80 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 Inverter Racks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58-60
Bifocal Clear Safety Glasses. . . . . . . . . . . . . . . . . . . . . 133 FlexCut® 125. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Brass Wire Brushes. . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Flex Feed® 74 HT. . . . . . . . . . . . . . . . . . . . . . . . . . . . 91, 103 J
Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Flex Feed® 84. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91, 103 Jackets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128-129
Bulk Package Hoods and Accessories for Flex Feed® 84 Dual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Jessi Combs MIG/Stick Welding Gloves. . . . . . . . . . . . 135
Drums and Boxes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 FLEXTEC® 350X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Jessi Combs Women’s Shadow™
Bulldog® 5500. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 FLEXTEC® 350X Inverter Racks. . . . . . . . . . . . . . . . . . . 59 Welding Jacket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Burny® Shape Cutting Controllers. . . . . . . . . . . . . . . . 175 FLEXTEC® 500. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Jessi Combs Women’s Steelworker® Gloves . . . . . . . 135
FLEXTEC® 500 Inverter Racks. . . . . . . . . . . . . . . . . . . . 59 Jessi Combs Women’s
C FLEXTEC® 500P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Welding Gear Ready-Pak®. . . . . . . . . . . . . . . . . . . . . . 125
Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 FLEXTEC® 650X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38, 110 Jessi The Welder™ Auto Darkening
Welding Helmet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Carbon Steel Wire Brushes. . . . . . . . . . . . . . . . . . . . . . 137 FLEXTEC® 650X Inverter Racks. . . . . . . . . . . . . . . . . . . 60
Jessi vs. The Robot™ Welding Helmet. . . . . . . . . . . . . 135
Chipping Hammer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 Formed Extraction Hood. . . . . . . . . . . . . . . . . . . . . . . 208
The Circulator®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210 FR Welding Lab Coat. . . . . . . . . . . . . . . . . . . . . . . . . . 130
K
Classic® 300 HE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 FR Welding Shirts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
K126™ PRO Welding Gun. . . . . . . . . . . . . . . . . . . . . . . 156
Classic® 300 MP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Full Leather Steelworker® Gloves . . . . . . . . . . . . . . . . 127
ClassMate™ Robotic Welding Training Cell . . . . . . . 229 Fume Extraction Arms. . . . . . . . . . . . . . . . . . . . . . . . . 205
L
Classroom & Lab Support Materials
(Education Solutions). . . . . . . . . . . . . . . . . . . . . . . . . 224 Lab coats. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
G Laser Welding (Automation Solutions). . . . . . . . . . . 196
Conduit Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . 186 Ground Clamps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Conduit Hangers, Clamps and Sleeves. . . . . . . . . . . 186 Leather TIG Working Gloves . . . . . . . . . . . . . . . . . . . . 127
Goggles (Cutting & Grinding). . . . . . . . . . . . . . . . . . . . 132
Control Cables and Adapters. . . . . . . . . . . . . . . . . . . 238 LF-72. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Guardian™ Fire Safety Solutions . . . . . . . . . . . . . . . . . 211
Cougar™ Push-Pull Guns. . . . . . . . . . . . . . . . . . . . . . . . 161 LF-74. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Guns & Torches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151-167
Cross Country® 300. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Lincoln® Cover 2® Clear Safety Glasses. . . . . . . . . . . . 133
Cruiser™ Tractor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Lincoln Electric Education Partner Schools (LEEPS).. . .
H 225Lincoln® Starlite® Outdoor Safety Glasses . . . . . . 134
Custom Training (Education Solutions). . . . . . . . . . 225 Heat-Resistant Welding Gloves . . . . . . . . . . . . . . . . . 127 Lincoln® Starlite® Clear Safety Glasses. . . . . . . . . . . . 133
Cutting (Automation Solutions). . . . . . . . . . . . . . . . . 193 Heavy-Duty Leather Welding Jacket . . . . . . . . . . . . 128 Lincoln® Starlite® IR 5 Safety Glasses . . . . . . . . . . . . . 134
Cutting Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168-183 Heavy-Duty MIG/Stick Welding Gloves . . . . . . . . . . 126 LN-23P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
High Vacuum Central Systems . . . . . . . . . . . . . . . . . . 211 LN-25 PRO Dual Power. . . . . . . . . . . . . . . . . . . . . . . . . 88
D HYDROGUARD™ Rod Canister. . . . . . . . . . . . . . . . . . . . 141 LN-25 PRO Extra Torque. . . . . . . . . . . . . . . . . . . . . . . . 88
Dispensing Equipment for Bulk Reels. . . . . . . . . . . . . 187 HYDROGUARD™ Rod Ovens . . . . . . . . . . . . . . . . . . . . . 141 LN-25 PRO Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Doo Rags. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
LN-25X™ with CrossLinc™ Technology. . . . . . . . . . . . . 89
DownFlex® Tables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 I Low Vacuum Central Systems. . . . . . . . . . . . . . . . . . . 211
Drive and Cable Accessories. . . . . . . . . . . . . . . . . . . 230-240 I-Beam™ Safety Glasses. . . . . . . . . . . . . . . . . . . . . . . . . 134 LT-7 Tractor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Drive Roll and Wire Guide Kits. . . . . . . . . . . . . . . . . . 239 Idealarc® 250. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Drive Roll and Guide Tube Kits . . . . . . . . . . . . . . . . . 240 Idealarc® AC1200. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Drum and Box Covers . . . . . . . . . . . . . . . . . . . . . . . . . 185 Idealarc® CV305. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Drum, Reel and Box Handling Equipment. . . . . . . . 185 Idealarc® CV400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

242 | www.lincolnelectric.com
INDEX

M P (cont) S (cont)
Magnetic Fixtures and Hand Lifters. . . . . . . . . . . . . 136 Power Feed® 84 Dual. . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Shadow™ Split Leather-Sleeved Jacket. . . . . . . . . . . 128
Magnum® PRO 100L Gun. . . . . . . . . . . . . . . . . . . . . . . . 152 POWER MIG® 140C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Software and Accessories for
Magnum® PRO 100SG Spool Gun. . . . . . . . . . . . . . . . 160 POWER MIG® 180C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 CNC Cutting Systems. . . . . . . . . . . . . . . . . . . . . . . . . . .175
Magnum® PRO 175L Gun . . . . . . . . . . . . . . . . . . . . . . . . 152 POWER MIG® 180 Dual. . . . . . . . . . . . . . . . . . . . . . . . . . 22 Square Wave® TIG 200. . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Magnum® PRO 250L Gun. . . . . . . . . . . . . . . . . . . . . . . . 152 POWER MIG® 210 MP®. . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Spirit® ll Fine Line® High-Definition
Plasma Cutting Systems . . . . . . . . . . . . . . . . . . . . . . . 174
Magnum® PRO 250LX™ Spool Gun. . . . . . . . . . . . . . . . 161 POWER MIG® 256 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Split-Leather Welding Apron. . . . . . . . . . . . . . . . . . . 130
Magnum® PRO Barrel Series. . . . . . . . . . . . . . . . . 154-155 POWER MIG® 260. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Split-Leather FR Welding Sleeves. . . . . . . . . . . . . . . 130
Magnum® PRO Curve™ Series. . . . . . . . . . . . . . . . . . . . 153 POWER MIG® 350 MP® . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Spool Guns. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160-161
Magnum® PRO Fume Guns. . . . . . . . . . . . . . . . . . . . . 156 Power REAM® Torch Maintenance System . . . . . . . 188
Stainless Steel and Aluminum Wire Brushes . . . . . . . .
Magnum® PRO Push / Pull Guns. . . . . . . . . . . . . . 162-163 Power Wave® AC/DC 1000® SD. . . . . . . . . . . . . . . . . . . 112 137Stamping and Metal Forming
Magnum® PRO Robotic Guns. . . . . . . . . . . . . . . . 158-159 Power Wave® Advanced Module. . . . . . . . . . . . . . . . . 49 (Automation Solutions) . . . . . . . . . . . . . . . . . . . . . . . 193
Magnum® SG Spool Gun . . . . . . . . . . . . . . . . . . . . . . . 160 Power Wave® C300. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Standard Welding Gear Ready-Pak®. . . . . . . . . . 124, 230
Magnum® Welding Guns. . . . . . . . . . . . . . . . . . . . . . . 155 Power Wave® C300 Statiflex® 200-M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
Manual Hand Lifter . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 Education Ready-Pak® Package. . . . . . . . . . . . . . . . . 228 Statiflex® 800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
MASTERPIPE™ Compact Profiler. . . . . . . . . . . . . . . . 176 Power Wave® S350. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Statiflex® Complete. . . . . . . . . . . . . . . . . . . . . . . . . . . 209
MASTERPIPE™ Profiler. . . . . . . . . . . . . . . . . . . . . . . . . 176 Power Wave® S500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Statiflex® Filter Bank. . . . . . . . . . . . . . . . . . . . . . . . . . 208
MAXsa® 10 Controller. . . . . . . . . . . . . . . . . . . . . . . . . . 108 Power Wave® S700. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Stick Welders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
MAXsa® 19 Controller. . . . . . . . . . . . . . . . . . . . . . . . . . 109 Power Wave® STT® Module. . . . . . . . . . . . . . . . . . . . . . 49 Submerged Arc &
Power Wave® Wireless Connectivity Module . . . . . . 50 Automatic Equipment. . . . . . . . . . . . . . . . . . . . . . . . . 102-118
MAXsa® 22 Feed Head . . . . . . . . . . . . . . . . . . . . . . . . . 108
Precision TIG® 225. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Submerged Arc Guns. . . . . . . . . . . . . . . . . . . . . . . . . . . 157
MAXsa® 29 Feed Head. . . . . . . . . . . . . . . . . . . . . . . . . 109
Precision TIG® 275. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 System Integration (Automation Solutions). . . . . . 197
Mechanized Welding (Automation Solutions) . . . . 195
MIG & FCAW: Industrial Welders . . . . . . . . . . . . . . . . 30-33 Precision TIG® 375. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Premium Welding Gear Ready-Pak®. . . . . . . . . . . . . . 125 T
MIG: Wire Feeder/Welders. . . . . . . . . . . . . . . . . . . . . . 20-29
Premium Leather MIG/Stick Welding Gloves. . . . . . 126 Tandem Cruiser™ Tractor. . . . . . . . . . . . . . . . . . . . . . . 105
Miniflex®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
Prism™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Teaching Aid Toolbox. . . . . . . . . . . . . . . . . . . . . . . . . . 231
Mini Multi-Angle Fixture. . . . . . . . . . . . . . . . . . . . . . . 136
Push-Pull Guns. . . . . . . . . . . . . . . . . . . . . . . . . . . . 161-163 TIG Torches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164-166
Mobiflex® 100-NF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
Push/Pull Fume Systems. . . . . . . . . . . . . . . . . . . . . . . 210 TIG Welders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-19
Mobiflex® 200-M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
PythonX® ll. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177 Tomahawk® 375 Air. . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Mobiflex® 400-MS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
Tomahawk® 625 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Modular Extraction Hood. . . . . . . . . . . . . . . . . . . . . . 207
R Tomahawk® 1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Multi-Angle Fixture. . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Radius™ Welding Tools. . . . . . . . . . . . . . . . . . . . . 136-141 Tomahawk® 1500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Multi-Operator Welding Systems . . . . . . . . . . . . . . . 57-62
Ranger® 225. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Tooling (Automation Solutions). . . . . . . . . . . . . . . . . 193
Multi-Process Welders . . . . . . . . . . . . . . . . . . . . . . . . . 34-44
Ranger® 250 GXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Torchmate® 4400 / 4800. . . . . . . . . . . . . . . . . . . . . . . . 172
Multi-Weld™ 350. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Ranger® 305 D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Torchmate® 5100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Ranger® 305 G. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Torchmate® 4400 / 4800 Educational Packages. . . 225
N
Ranger® 305 G EFI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Torchmate® X Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
NA-3S Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Ranger® 305 LPG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Traditional FR Cloth Jackets. . . . . . . . . . . . . . . . . . . . 129
NA-3S/NA-4 Feed Heads. . . . . . . . . . . . . . . . . . . . . . . 106
REALWELD®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228 Traditional Lincoln® Clear Safety Glasses. . . . . . . . . . 133
NA-3SF/NA-4F Feed Heads. . . . . . . . . . . . . . . . . . . . . 106
Red Line™ Welding Apparel . . . . . . . . . . . . . . . . . 125-135 Traditional MIG/Stick Welding Gloves . . . . . . . . . . . 126
NA-4 Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Robotic Welding (Automation Solutions) . . . . . . . . 196 Traditional Welding Gear Ready-Pak®. . . . . . . . . . . . 125
NA-5 Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Robotic Welding Power Sources Traditional Split Leather-Sleeved Jacket. . . . . . . . . 128
NA-5S and NA-5SF Feed Heads. . . . . . . . . . . . . . . . . 107
and Wire Feeders (Automation Solutions) . . . 198-199
Roll Cage™ Welding Rigging Gloves . . . . . . . . . . . . . 126 U
O RP6 Weldable Rust Preventative Fluid . . . . . . . . . . . 142 U/LINC™ Welding & Cutting Curriculum. . . . . . . . . . 223
Orbital Welding (Automation Solutions) . . . . . . . . . 195
Outback® 145. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
S V
Outback® 185. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
SAE-300® HE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Vantage® 322. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
SAE-300® MP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Vantage® 435. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
P SAE-500® Severe Duty™. . . . . . . . . . . . . . . . . . . . . . . . . 76 Vantage® 549 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Padded Safety Glasses . . . . . . . . . . . . . . . . . . . . . . . . . 132
Safety Glasses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132-134 Vantage® 566 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Pivot Angle Magnetic Fixture. . . . . . . . . . . . . . . . . . . 136
Semiautomatic Wire Feeders . . . . . . . . . . . . . . . . . . 85-101 VRTEX® 360+ (Dual User) . . . . . . . . . . . . . . . . . . . . . . 226
Positioning Equipment (Automation Solutions). . . 195
Shade 3 Cutting and Grinding Goggles. . . . . . . . . . . . 132 VRTEX® 360 (Single User) . . . . . . . . . . . . . . . . . . . . . . 226
Power Feed® 25M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Shade 5 Cutting and Grinding Goggles. . . . . . . . . . . . 132 VRTEX® Engage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
Power Feed® 84. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Shadow™ Grain Leather-Sleeved Jacket. . . . . . . . . . 128 VRTEX® Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227

www.lincolnelectric.com | 243
INDEX

V (cont)
VIKING® 1740 Helmets . . . . . . . . . . . . . . . . . . . . . . . . . 120
VIKING® 1840 Series Helmets . . . . . . . . . . . . . . . . . . . 120
VIKING® 2450 Series Helmets. . . . . . . . . . . . . . . . . . . . 121
VIKING® 2450D Helmet. . . . . . . . . . . . . . . . . . . . . . . . . . 121
VIKING® 3250D FGS Helmet. . . . . . . . . . . . . . . . . . . . . . 122
VIKING® 3350 PAPR™ Helmet. . . . . . . . . . . . . . . . . . . . . 124
VIKING® 3350 Series Helmets. . . . . . . . . . . . . . . . . . . . 122
VIKING® Industrial Passive™ Helmet . . . . . . . . . . . . . 120
VIKING® Welding Helmets . . . . . . . . . . . . . . . . . . 120-124

W
Warranty Information. . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Weld Fume Control. . . . . . . . . . . . . . . . . . . . . . . . . . . 200-221
Welding Aprons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Welding Blankets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Welding Booths and Tables . . . . . . . . . . . . . . . . . . . 230
Welding Beanies/Caps/Doo Rags. . . . . . . . . . . . . . . . . 131
Welding Curtains. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Welding Gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119-150
Welding Gloves. . . . . . . . . . . . . . . . . . . . . . . . . . . . 126-127
Welding Jackets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Welding Pliers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Welding Shirts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Welding Safety Checklist . . . . . . . . . . . . . . . . . . . . . . . 241
Welding Technology & Training Center (WTTC). . . 225
Weld Cable Connectors. . . . . . . . . . . . . . . . . . . . . . . . 237
Weld Power Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
Weld Wire Conduit. . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
Welper® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Wire Brushes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Wire Delivery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184-191
Wire Delivery Accessories. . . . . . . . . . . . . . . . . . . . . . 189
Wire Drive Systems (2-Roll and 4-Roll). . . . . . . 239-240
Wire Feed Assist. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
Wire Level Gauge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
Wire Straightners. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
Women’s Starlite® Clear
Safety Glasses. . . . . . . . . . . . . . . . . . . . . . . . . . . . 133, 135

X
X-Tractor® 1GC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
X-Tractor® 3A, 5A, 8A . . . . . . . . . . . . . . . . . . . . . . . . . . 203

244 | www.lincolnelectric.com
IN YOUR MAILBOX »»
ABSOLUTELY FREE!
Subscribe now and we’ll add you to our mailing list. You’ll receive
the print edition of ARC Magazine. And it’s all absolutely free!

Visit arcmagazine.pub/subscribe to subscribe today.

.pub
Winter 2018 | arcmagazine

ALSO INSIDE: FORGED

IN FIRE
DE
HOLIDAY GIFT Ge,UI
the novic
Welding gear for the
eve ryo ne in between
veteran and

IG HT Metalsmiths compete on the cutting

PROJECT SPOTL
easy edge to build the perfect blade
for
A multi-station table
r too ls by Jimmy DiRresta
access to you

©2018 The Lincoln Electric Co. All Rights Reserved.

 The Lincoln Electric Company
22801 St. Clair Avenue • Cleveland, OH • 44117 • U.S.A.
Publication E1.10 | Issue Date 01/19
© Lincoln Global, Inc. • All Rights Reserved. www.lincolnelectric.com