Scribd
Upload
53 views1 page

Style Ss2: Material Specifications

This document provides specifications for stainless steel repair clamps made by Romac Industries. It lists the material specifications for the shells, lugs, bolts, nuts, and gaskets. It then provides sizing information including nominal pipe sizes from 4 to 30 inches, outer diameter ranges, catalog numbers, prices, weights, and the number of bolts per clamp length. Recommendations are given for proper use of the clamps.

Uploaded by

Al Jameel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
53 views1 page

Style Ss2: Material Specifications

This document provides specifications for stainless steel repair clamps made by Romac Industries. It lists the material specifications for the shells, lugs, bolts, nuts, and gaskets. It then provides sizing information including nominal pipe sizes from 4 to 30 inches, outer diameter ranges, catalog numbers, prices, weights, and the number of bolts per clamp length. Recommendations are given for proper use of the clamps.

Uploaded by

Al Jameel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

www.romac.

com • 1-800-426-9341 REPAIR CLAMPS

STYLE SS2 (two section)


WIDER RANGE .80”

MATERIAL SPECIFICATIONS
SHELLS AND LUGS: Stainless steel per ASTM A 240, type 304.
BOLTS: UNC rolled thread, stainless steel per ASTM A 193, type 304.
NUTS: Stainless steel per ASTM A 194, type 304.

REPAIR CLAMPS
WASHERS: Stainless steel per ASTM A 240, type 304 and plastic
lubricating washers.
GASKETS: SBR per ASTM D 2000 MAA 610. Compounded for water
and sewer service. Other compounds available on request.

MEETS MADE IN U.S.A.


NSF61 certified upon request.
AWWA C230 SS2-7.64 X 10" REPAIR CLAMP

NOM. O.D. SIZE LENGTH


LENGTH/ /WEIGHT
WEIGHT
PIPE SIZE RANGE CATALOG NUMBER 8" 10" 12" 16" 20" 24" 30"
4.47 - 5.27 SS2 - 5.27 x length
4.77 - 5.57 $241.19 $316.79 $375.14 $448.49 $600.60 $768.14
4” 5.20 - 6.00
SS2 - 5.57 x length
9# 12# 13# 17# 25# 30#
N/A
SS2 - 6.00 x length 1
6.57 - 7.37 SS2 - 7.37 x length 277.26 356.70 406.29 524.57 716.04 941.44 1013.47
6” 6.84 - 7.64 SS2 - 7.64 x length 11# 15# 17# 22# 28# 34# 43#
7.20 - 8.00 SS2 - 8.00 x length 1
8.59 - 9.39 SS2 - 9.39 x length 317.35 396.04 461.58 600.60 813.07 1,075.28
1,143.12
8” 8.99 - 9.79 SS2 - 9.79 x length 12# 17# 19# 24# 30# 36# 47#
9.20 - 10.00 SS2-10.00 x length 1
10.70 - 11.50 SS2-11.50 x length
320.84 519.32 712.79 747.47 996.65 1,324.96
1,493.40
10” 11.04 - 11.84 SS2-11.84 x length
15# 18# 23# 32# 41# 47# 59#
11.40 - 12.20 SS2-12.20 x length
12.70 - 13.50 SS2-13.50 x length
13.15 - 13.95 SS2-13.95 x length 411.20 595.37 809.26 855.02 1,154.02 1,471.91
1,681.79
12” 13.50 - 14.30 SS2-14.30 x length 16# 19# 25# 33# 41# 50# 61#
13.71 - 14.51 SS2-14.51 x length
15.00 - 15.80 SS2-15.80 x length 589.53 796.11 1028.49 1,146.40 1,552.31 1,836.35 1,933.44
14” 15.95 - 16.75 SS2-16.75 x length 18# 21# 27# 33# 43# 50# 64#
1
Recommended for use on CL200 ACRB
NUMBER OF BOLTS PER CLAMP LENGTH
OD RANGE 8" 10" 12" 16" 20" 24" 30" FOR TAPPED SS2 SEE PAGE 2-14.
4.47 - 9.99 4 6 6 8 10 12 16 FOR SEWER O.D.S SEE PAGE 7-8.
10.00 - 16.75 6 6 8 10 14 16 20 For higher working pressures, clamp length should equal or exceed diameter
of pipe. Some sizes and lengths not listed are available on request.
Clamps are not to be used for joining plain end pipe.

TO ORDER: Specify catalog number x length of clamp desired.


EXAMPLE: For a two-section clamp for pipe with an O.D. between 6.84 and 7.64 and clamp length of 10”, order SS2 - 7.64 x 10”
JULY 01, 2017 • REVISED: 08/07/2017 2-5

You might also like