Scribd
Upload
430 views2 pages

How To Upgrade TP-LINK Wireless Access Point (Tplinkap - Net Version) PDF

The document provides instructions for upgrading the firmware of a TP-LINK wireless access point. It advises verifying the hardware version and firmware compatibility before downloading the correct firmware file from the TP-LINK website. Users are instructed to extract the firmware file and upgrade via a wired Ethernet connection to avoid interrupting the process. Settings should be recorded before upgrading as they may be lost. The steps then outline logging into the access point's web interface, selecting the firmware file, and allowing the access point to reboot automatically once upgrading is complete.

Uploaded by

fanny
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
430 views2 pages

How To Upgrade TP-LINK Wireless Access Point (Tplinkap - Net Version) PDF

The document provides instructions for upgrading the firmware of a TP-LINK wireless access point. It advises verifying the hardware version and firmware compatibility before downloading the correct firmware file from the TP-LINK website. Users are instructed to extract the firmware file and upgrade via a wired Ethernet connection to avoid interrupting the process. Settings should be recorded before upgrading as they may be lost. The steps then outline logging into the access point's web interface, selecting the firmware file, and allowing the access point to reboot automatically once upgrading is complete.

Uploaded by

fanny
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

How to upgrade TP-LINK Wireless Access Point

Notice:

● Please verify the hardware version of your device for the firmware version.
Wrong firmware upgrading may damage your device and void thewarranty.

● After you downloaded the firmware from TP-LINK website, please use
decompression software such as WinZIP or WinRAR to extract the firmware file
to a folder;

● It’s recommended to upgrade the firmware via cable connection;


● Do NOT turn off the power or cut down the Ethernet cable during
upgrade process;
● Because after upgrading the old settings may be lost, so please write down
the key settings as a backup before you start to upgrade.

Step 1 Log into the TP-LINK device by typing http://tplinkap.net/ in the address bar of
the web browser (such as Internet Explorer, Firefox). The username and
password are both admin unless you have changed it before.
Step 2 Click System Tools ->Firmware Upgrade, click the Browse button to choose
the firmware you already extracted in the folder.

Step 3 Click the Upgrade button. The device will reboot automatically after the
upgrading has been finished. Please wait about 3 minutes.

Step 4 Click Status, verify that the device’s firmware has been upgraded.

Step 5 Then, check the status page of your device, if necessary please re-enter or
reconfigure the device manually with the parameters you have written down before
upgrading.

You might also like