Scribd
Upload
144 views

Master Logic Diagram

Event tree analysis (ETA) is a technique used to analyze potential accident sequences and outcomes following an initiating event. It involves: (1) defining an initiating accidental event, (2) identifying barriers to prevent unwanted consequences, (3) constructing an event tree diagram showing potential outcomes, and (4) calculating probabilities of outcomes. The event tree visually represents all possible sequences of events and outcomes in a system to determine the probability of various end results. ETA is useful for risk assessment, identifying safety improvements, and decision making in complex systems like nuclear power plants.

Uploaded by

itszoey
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
144 views

Master Logic Diagram

Event tree analysis (ETA) is a technique used to analyze potential accident sequences and outcomes following an initiating event. It involves: (1) defining an initiating accidental event, (2) identifying barriers to prevent unwanted consequences, (3) constructing an event tree diagram showing potential outcomes, and (4) calculating probabilities of outcomes. The event tree visually represents all possible sequences of events and outcomes in a system to determine the probability of various end results. ETA is useful for risk assessment, identifying safety improvements, and decision making in complex systems like nuclear power plants.

Uploaded by

itszoey
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 31

EVENT TREE ANALYSIS

Event Tree Analysis

 Anaccidental event is defined as the first


significant deviation from a normal situation
that may lead to unwanted consequences (e.g.,
gas leak, falling object, start of fire)
 Anaccidental event may lead to many different
consequences. The potential consequences
may be illustrated by a consequence spectrum
Consequence Spectrum

 Event tree analysis is a binary form of a decision tree for evaluating the
various multiple decision paths in a given problem
 It evolved from studies involving nuclear power plant in the 1970’s.
Event Tree Analysis

 An event tree is a visual representation of all the events which can


occur in a system.
 The goal of an event tree is to determine the probability of an event
based on the outcomes of each event in the chronological
sequence of events leading up to it.
 As the number of events increases, the picture fans out like the
branches of a tree.
 By analyzing all possible outcomes, you can determine the
percentage of outcomes which lead to the desired result.
Generic Example
Example: Fire
Example: Explosion
Steps in Constructing Event Tree

1. Identify (and define) a relevant accidental (initial) event that may give
rise to unwanted consequences
2. Identify the barriers that are designed to deal with the accidental
event
3. Construct the event tree
4. Describe the (potential) resulting accident sequences
5. Determine the frequency of the accidental event and the
(conditional) probabilities of the branches in the event tree
6. Calculate the probabilities/frequencies for the identified
consequences (outcomes)
7. Compile and present the results from the analysis
Accidental Event

 When defining an accident event, we should answer the following


questions:
• What type of event is it? (e.g., leak, fire)
• Where does the event take place? (e.g., in the control room)
• When does the event occur? (e.g., during normal operation,
during maintenance)
 In practical applications there are sometimes discussions about what
should be considered an accidental event (e.g., should we start with
a gas leak, the resulting fire or an explosion). Whenever feasible, we
should always start with the first significant deviation that may lead to
unwanted consequences.
Accidental Event

 An accidental event may be caused by:


• System or equipment failure
• Human error
• Process upset
 The accidental event is normally “anticipated”. The system designers
have put in barriers that are designed to respond to the event by
terminating the accident sequence or by mitigating the consequences
of the accident
 For each accidental event we should identify:
• The potential accident progression(s)
• System dependencies
• Conditional system responses
Barriers

 Most well designed systems have one or more barriers to stop or


reduce the consequences of potential accidental events.
 Barriers may be technical and/or administrative (organizational).
 The barriers that are relevant for a specific accidental event should
be listed in the sequence they will be activated.
 Examples include:
• Automatic detection systems (e.g., fire detection)
• Automatic safety systems (e.g., fire extinguishing)
• Alarms warning personnel/operators
• Procedures and operator actions
• Mitigating barriers
Additional Events/Factors

 Additional events and/or factors should be


listed together with the barriers, as far as
possible in the sequence when they may take
place.
 Some examples of additional events/factors
were given on a previous slide
Event Sequence

 Each barrier should be described by a (negative) statement, e.g., “Barrier X does


not function” (This means that barrier X is not able to performs its required
function(s) when the specified accidental event occurs in the specified context).
 Additional events and factors should also be described by (worst case) statements,
e.g., gas is ignited, wind blows toward dwelling area.
Outcome Alternatives

 In most applications only two alternatives (“true” and “false”) are


considered. It is, however, possible to have three or more
alternatives, as shown in the example below:
End Outcomes

 In practice, many event trees are ended before the “final”


consequences are reached
 Including these “final” consequences may give very large
event trees that are impractical for visualization
 This is solved by establishing a consequence distribution for
each end event and the probability of each consequence is
determined for each end event
 In effect, this is an extension of the event tree, but it gives a
more elegant and simpler presentation and also eases the
summary of the end results
Results in Decision Making

 The results from the event tree analysis may


be used to:
• Judge the acceptability of the system
• Identify improvement opportunities
• Make recommendations for improvements
• Justify allocation of resources for
improvements
Pros and Cons of ETA

 Positive
• Visualize event chains following an accidental event
• Visualize barriers and sequence of activation
• Good basis for evaluating the need
 Negative
• No standard for the graphical representation of the event tree
• Only one initiating event can be studied in each analysis
• Easy to overlook subtle system dependencies
• Not well suited for handling common cause failures in the
quantitative analyses
• The event tree does not show acts of omission
MASTER LOGIC DIAGRAM
Background

 For complex systems that has several separate subsystems that interact
with each other
 Logical representation of the overall system interactions with respect to
the individual subsystems
 Displayed by dependency matrix
 For each function, subfunction, subsystem and hardware item shown on
the MLD, the effect of failure or success of all combinations of items is
established and explicitly shown by •
Example: Nuclear Power Plant

 Independent functions: heat generation, normal heat transport,


emergency heat transport, reactor shutdown, heat to mechanical
conversion, and mechanical to electrical conversion
 Same end goal of safely generating electric power
Example

2 major
functions
or systems

Support
systems Subfunction
of S
Development of MLD

 Key element: all physically


independent
 Physically independent: do not share
other system parts
 Combanitorial approach
 Determine all possible 2n
combinations of failures of
independent items
 Map them to MLD
 Propagate their effects using MLD
logic
Combinations of failure

Mutually exclusive
combination of
items modeled in
MLD with a
probability > 1.0E-6
Combinations of failure

 Probability of failure = 0.01


 S1-1, S1-2, S3, F1-1, F1-2, F2-1 and F2-2
 Select combinations that lead to
complete system failure
 Sum of probabilities of this occurrence is
the failure probability of the system
 Combinations that lead to success, sum
of probabilities is the reliability of the
system
Conditional System Probability of
Failure

 Particular element is set to failure


 All other combinations that lead to system’s
failure may be identified
 Element S1-2 is set to failure
Exercise
Solution
Solution
Solution
Solution
Thank you

You might also like