Scribd
Upload
184 views

Density Based Auto Traffic Signal Control With Android Based Remote Override

The document describes a density-based dynamic traffic signal control system with remote override capabilities using an Android device. Sensors detect vehicle density in zones to automatically adjust signal timing. In emergencies, authorized vehicles can override the timing using a Bluetooth device and Android app to provide a green light while blocking other lanes. The system aims to reduce congestion compared to fixed-time traffic lights. It could be enhanced by networking multiple intersections for city-wide synchronization of signals.

Uploaded by

Abdul Razzak
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
184 views

Density Based Auto Traffic Signal Control With Android Based Remote Override

The document describes a density-based dynamic traffic signal control system with remote override capabilities using an Android device. Sensors detect vehicle density in zones to automatically adjust signal timing. In emergencies, authorized vehicles can override the timing using a Bluetooth device and Android app to provide a green light while blocking other lanes. The system aims to reduce congestion compared to fixed-time traffic lights. It could be enhanced by networking multiple intersections for city-wide synchronization of signals.

Uploaded by

Abdul Razzak
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

DENSITY BASED AUTO TRAFFIC SIGNAL CONTROL WITH

ANDROID BASED REMOTE OVERRIDE

ABSTRACT

The project is designed to develop a density based dynamic traffic signal system having

remote override facilities. During normal time the signal timing changes automatically on

sensing the traffic density at the junction but in the event of any emergency vehicle like

ambulance, fire brigade etc requiring priority are built in with Android application device remote

control to override the set timing by providing instantaneous green signal in the desired direction

while blocking the other lanes by red signal for some time. Traffic congestion is a severe

problem in many major cities across the world thus it is felt imperative to provide such facilities

to important vehicles.

Conventional traffic light system is based on fixed time concept allotted to each side of

the junction which cannot be varied as per varying traffic density. Junction timings allotted are

fixed. Sometimes higher traffic density at one side of the junction demands longer green time as

compared to standard allotted time. The proposed system using a microcontroller of 8051 family

duly interfaced with sensors, changes the junction timing automatically to accommodate

movement of vehicles smoothly avoiding unnecessary waiting time at the junction. The sensors

used in this project are IR and photodiodes are in line of sight configuration across the loads to

detect the density at the traffic signal. The density of the vehicles is measured in three zones i.e.,

low, medium, high based on which timings are allotted accordingly. The override feature is

activated by an on board Bluetooth device from the Android application device operated from the
emergency vehicle. Remote operation is achieved by any smart-phone/Tablet etc., with Android

OS, upon a GUI (Graphical User Interface) based touch screen operation.

Further the project can be enhanced by synchronizing all the traffic junctions in the city

by establishing a network among them. The network can be wired or wireless. This

synchronization will greatly help in reducing traffic congestion.

BLOCK DIAGRAM

HARDWARE REQUIREMENTS: SOFTWARE REQUIREMENTS:


8051 series Microcontroller, LEDs, Voltage Keil compiler
Regulator, Resistors, Capacitors, Crystal, Diodes,
Transformer, IR-LED & Photodiodes, Transistor, Language: Embedded C or Assembly
Bluetooth device. Android Application

You might also like