0% found this document useful (0 votes)
1K views2 pages

80010251

This document describes a 35° wideband directional antenna made by Kathrein. It has adjustable electrical downtilt from 0-12° for optimizing polarization diversity sites. It offers variable downtilt so fewer models are needed to accommodate different conditions. The antenna has a UV resistant fiberglass radome and is designed to accommodate future 3G/UMTS applications. It operates between 1710-2170 MHz with less than 1.5:1 VSWR and has high front-to-back and cross polarization ratios.

Uploaded by

selahattin AY
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
1K views2 pages

80010251

This document describes a 35° wideband directional antenna made by Kathrein. It has adjustable electrical downtilt from 0-12° for optimizing polarization diversity sites. It offers variable downtilt so fewer models are needed to accommodate different conditions. The antenna has a UV resistant fiberglass radome and is designed to accommodate future 3G/UMTS applications. It operates between 1710-2170 MHz with less than 1.5:1 VSWR and has high front-to-back and cross polarization ratios.

Uploaded by

selahattin AY
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

800 10251

35° Wideband Directional Antenna

Kathrein’s X-polarized adjustable electrical downtilt antennas offer


the wireless carrier the ability to tailor polarization diversity sites
for optimum performance. Using variable downtilt, only a few
models need be procured to accommodate the needs of widely
varying conditions. Remotely controlled downtilt is available as
a retrofitable option.
• 0-12° downtilt range.
• UV resistant pulltruded fiberglass radome.
• DC Grounded metallic parts for impulse suppression.
• No moving electrical connections.
• Wideband vector dipole technology.
• Optional remote downtilt Control.
• Will accomodate future 3G / UMTS applications.

General specifications:
Frequency range 1710–2170 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3:< -150 dBc
Polarization +45° and -45°
Front-to-back ratio >30 dB (co-polar)
(180° ± 30°)
Connector 2 x 7/16 DIN female
Isolation >30 dB
Maximum input power 300 watts (at 50°C) per input
Weight 25.4 lb (11.5 kg)
Dimensions 40.6 x 11.8 x 2.7 inches
(1032 x 299 x 69 mm)
Equivalent flat plate area 4.42 ft2 (0.411 m2)
Wind survival rating* 120 mph (200 kph)
Shipping dimensions 52.6 x 13.3 x 4.4 inches
(1336 x 337 x 112 mm)
o
Shipping weight 32 lb (14.5 kg) 

o



o

Mounting Fixed and tilt mount options are available for




 o
o 
2 to 4.6 inch (50 to 115 mm) OD masts. 

See reverse for order information. 

o o


o o


Specifications:

o

1710–1880 MHz 1850–1990 MHz 1920–2170 MHz





o

o

Gain 19.2 dBi 19.5 dBi 19.8 dBi


Horizontal pattern
Horizontal beamwidth 36° (half-power) 35° (half-power) 33° (half-power) ±45°- polarization
Vertical beamwidth 9.2° (half-power) 9° (half-power) 8.5° (half-power)
Electrical downtilt 0°–12° 0°–12° 0°–12°
continuously adjustable (manual or optional remote control)
Sidelobe suppression for 0° 6° 12° T 0° 6° 12° T 0° 6° 12° T o
first sidelobe above horizon 15 17 17 dB 15 17 17 dB 15 17 17 dB




o

Horizontal pattern >18 dB >17 dB >15 dB 




o o
 
Cross polar ratio
Main direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical) 

Sector ±30° >10 dB >10 dB >10 dB o o


o o

* Mechanical design is based on environmental conditions as
stipulated in EIA-222-F (June 1996) and/or ETS 300 019-1-4

o


o

o

which include the static mechanical load imposed on an antenna


by wind at maximum velocity. See the Engineering Section of Vertical pattern
the catalog for further details. ±45°- polarization
10824-A
936.2568/a
Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500 Fax: (541) 779-3991
Email: [email protected] Internet: www.kathrein-scala.com
800 10251
35° Wideband Directional Antenna
2.625 inches ± 0.125
(68 mm ± 4)

35 mm
M6

40.6 inches
(1032 mm)

43.7 inches
(1109 mm)
64 mm
M8
45.2 inches
(1149 mm)
49.4 inches
2 x 738 546 Mounting Kit (1254 mm)

Mounting Options:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
737 978 Tilt Mount Kit
0­­–20 Degrees downtilt angle.

–45n +45n

11.8 inches
2.7 inches (299 mm)
(69 mm)

1710/2170 1710/2170
-45° +45°

7/16 DIN 7/16 DIN

Order Information:
Model Description
800 10251 Antenna with 7/16 DIN connectors
0°–12° adjustable electrical downtilt

All specifications are subject to change without notice. The latest specifications are available at www.kathrein-scala.com.
Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500 Fax: (541) 779-3991
Email: [email protected] Internet: www.kathrein-scala.com

You might also like