Scribd
Upload
3K views

Astm F593 PDF

This specification covers the chemical and mechanical requirements for stainless steel bolts, hex cap screws, and studs ranging from 1/4" to 1-1/2" in diameter. It includes seven alloy groups made of austenitic or martensitic stainless steels. The specification defines the alloy designations, conditions, markings, dimensions, mechanical properties including tensile strength, yield strength and hardness for each alloy group. It also provides the chemical requirements and recommended mating materials for nuts and washers.

Uploaded by

Billy D
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3K views

Astm F593 PDF

This specification covers the chemical and mechanical requirements for stainless steel bolts, hex cap screws, and studs ranging from 1/4" to 1-1/2" in diameter. It includes seven alloy groups made of austenitic or martensitic stainless steels. The specification defines the alloy designations, conditions, markings, dimensions, mechanical properties including tensile strength, yield strength and hardness for each alloy group. It also provides the chemical requirements and recommended mating materials for nuts and washers.

Uploaded by

Billy D
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

 

ASTM F593
Scope - This specification covers the chemical and mechanical requirements for stainless steel
bolts, hex cap screws, and studs in diameters ranging from 1/4" to 1-1/2" inclusive. These
fasteners are for general purpose usage and are available in seven alloy groups.
 
 

Alloy Group Alloy Designation* Alloy Type


1 303, 304, 304L, 305, 384, XM1, 18-9LW, 302HQ, 303Se Austenitic
2 316, 316L Austenitic
3 321, 347 Austenitic
Materials
4 430, 430F Ferritic
5 410, 416, 416Se Martensitic
6 431 Martensitic
7 630 (17-4) Precipitation Hardening

*The selection of an alloy within each group is at the discretion of the manufacturer unless the
purchaser requests a specific alloy.

Alloy Condition Marking Diameter Tensile, ksi Yield, Rockwell


Group Range ksi min Hardness
AF F593A 1/4 to 1-1/2 65 to 85 20 B85 max
A F593B 1/4 to 1-1/2 75 to 100 30 B65 to 95
1
Mechanical CW1 F593C 1/4 to 5/8 100 to 150 65 B95 to C32
Properties CW2 F593D 3/4 to 1-1/2 85 to 140 45 B80 to C32
AF F593E 1/4 to 1-1/2 65 to 85 20 B85 max
A F593F 1/4 to 1-1/2 75 to 100 30 B65 to 95
2
CW1 F593G 1/4 to 5/8 100 to 150 65 B95 to C32
CW2 F593H 3/4 to 1-1/2 85 to 140 45 B80 to C32
 
Element Alloy Group 1, Type 304 Alloy Group 2, Type 316
Carbon, max 0.08 0.08
Manganese, max 2.00 2.00
Phosphorus, max 0.045 0.045
Chemical Sulfur, max 0.030 0.030
Requirements Silicon, max 1.00 1.00
Chromium 18.0 to 20.0 16.0 to 18.0
Nickel 8.0 to 10.5 10.0 to 14.0
Copper, max 1.00
Molybdenum 2.00 to 3.00
 
Recommended Nuts Washers
Mating
Materials F594 SS304 or SS316

800-642-0921   or visit us at southernfasteners.com  

You might also like