Scribd
Upload
441 views

WF Base Plate Design Based On AISC 360-10/16

The document provides design summaries for base plate designs according to AISC 360-10/16 for three different column types: a WF section, an HSS section, and a pipe section. It includes input parameters such as loads, material properties, and column/plate sizes. It then performs checks for bearing pressure and determines values used to calculate the minimum required base plate thickness.

Uploaded by

Sơn Nguyễn-Lê
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
441 views

WF Base Plate Design Based On AISC 360-10/16

The document provides design summaries for base plate designs according to AISC 360-10/16 for three different column types: a WF section, an HSS section, and a pipe section. It includes input parameters such as loads, material properties, and column/plate sizes. It then performs checks for bearing pressure and determines values used to calculate the minimum required base plate thickness.

Uploaded by

Sơn Nguyễn-Lê
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

PROJECT : PAGE :

CLIENT : DESIGN BY :
JOB NO. : DATE : REVIEW BY :
WF Base Plate Design Based on AISC 360-10/16

INPUT DATA & DESIGN SUMMARY


AXIAL LOAD OF COMPRESSION Pa = 200 kips, (890 kN), ASD
STEEL PLATE YIELD STRESS Fy = 60 ksi, (414 MPa)
CONCRETE STRENGTH fc' = 3 ksi, (21 MPa)
COLUMN SIZE => W10X45
BASE PLATE SIZE N = 16 in, (406 mm)
B = 16 in, (406 mm)
AREA OF CONCRETE SUPPORT A2 = 1156 in2 ( 7458.05 cm2 )
(geometrically similar to and concentric with the loaded area.)

USE
16 x 16
1 in thick plate

ANALYSIS
CHECK BEARING PRESSURE (AISC 360 J8)

f 'c A1   A 2 , 1 , 1.7   522.24 kips > Pa


P p / Wc  MIN 0.85 MAX   
Wc   A1  
Where A1 = 256 in2, actual area of base plate. [Satisfactory]
Wc = 2.50

DETERMINE VALUES OF m, n, n', X , and l (AISC Manual Page 14-5)


m = 0.5 (N - 0.95 d) = 3.20 in
n = 0.5 (B - 0.8 bf ) = 4.79 in
n' = 0.25 (d bf )0.5 = 2.25 in

   0.38
4d b f  W c P a
X  MIN  , 1 
 2 
  d  b f  
  Pp
 

 2 X  0.69
l  MIN  , 1 
Where  1  1
d  X = 10.10 in, depth of column section.
bf = 8.02 in, flange width of column section.

DETERMINE REQUIRED THICKNESS OF BASE PLATE (AISC Manual Page 14-6)

1.00 in
3.33P a
t min  l 
F yBN
Where l = MAX ( m, n, ln' ) = 4.79 in
PROJECT : PAGE :
CLIENT : DESIGN BY :
JOB NO. : DATE : REVIEW BY :
Tube Base Plate Design Based on AISC 360-10/16

INPUT DATA & DESIGN SUMMARY


AXIAL LOAD OF COMPRESSION Pa = 200 kips, (890 kN), ASD
STEEL PLATE YIELD STRESS Fy = 60ksi, (414 MPa)
CONCRETE STRENGTH f c
' = 3 ksi, (21 MPa)
COLUMN SIZE => HSS8X8X1/2
BASE PLATE SIZE N = 16 in, (406 mm)
B = 16 in, (406 mm)
AREA OF CONCRETE SUPPORT A2 = 1156 in2 ( 7458.05 cm2 )
(geometrically similar to and concentric with the loaded area.)

USE
16 x 16
7/8 in thick plate

ANALYSIS
CHECK BEARING PRESSURE (AISC 360 J8)

f 'c A1   A2 , 1 , 1.7  
P p / Wc  MIN 0.85MAX    522.24 kips > Pa
Wc   A1  

Where A1 = 256 in2, actual area of base plate. [Satisfactory]


Wc = 2.50

DETERMINE VALUES OF m, n, n', X , and l (AISC Manual Page 14-5)


m = 0.5 (N - 0.95 d) = 4.20 in
n = 0.5 (B - 0.95 b ) = 4.20 in
n' = 0.25 (d b )0.5 = 2.00 in
 4db  
X  MIN   W c P a , 1  0.38
  d  b   P p
2

  
 2 X 
l  MIN  , 1   0.69
1 1 X 
Where d = 8.00 in, depth of column section.
b = 8.00 in, width of column section.

DETERMINE REQUIRED THICKNESS OF BASE PLATE (AISC Manual Page 14-6)

3.33P a
t min  l  0.87 in
F yBN

Where l = MAX ( m, n, ln' ) = 4.20 in


PROJECT : PAGE :
CLIENT : DESIGN BY :
JOB NO. : DATE : REVIEW BY :
Pipe Base Plate Design Based on AISC 360-10/16

INPUT DATA & DESIGN SUMMARY


AXIAL LOAD OF COMPRESSION Pa = 200 kips, (890 kN), ASD
STEEL PLATE YIELD STRESS Fy = 60 ksi, (414 MPa)
CONCRETE STRENGTH fc' = 3 ksi, (21 MPa)
COLUMN SIZE => HSS8.750X0.500
BASE PLATE SIZE N = 16 in, (406 mm)
B = 16 in, (406 mm)
AREA OF CONCRETE SUPPORT A 2
= 1156 in2 ( 7458.05 cm2 )
(geometrically similar to and concentric with the loaded area.)

USE
16 x 16
1 in thick plate

ANALYSIS
CHECK BEARING PRESSURE (AISC 360 J8)

f 'c A1   A2 , 1 , 1.7  
P p / Wc  MIN  0.85MAX    522.24 kips > Pa
Wc   A1  
Where A1 = 256 in2, actual area of base plate. [Satisfactory]
Wc = 2.50

DETERMINE VALUES OF m, n, n', X , and l (AISC Manual Page 14-5)


m = 0.5 (N - 0.80 d) = 4.50 in
n = 0.5 (B - 0.80 d) = 4.50 in
n' = 0.25 (d b )0.5 = 2.19 in
 4db  
X  MIN   W c P a , 1  0.38

  d b  2

  Pp 
 2 X 
l  MIN  , 1  0.69
 1  1  X 
Where d = 8.75 in, depth of column section.
b = 8.75 in, width of column section.

DETERMINE REQUIRED THICKNESS OF BASE PLATE (AISC Manual Page 14-6)

3.33 P a
t min  l  0.94 in
F yBN

Where l = MAX ( m, n, ln' ) = 4.50 in

You might also like