Scribd
Upload
773 views

ITR-C (Instrument) 16c

The document is an inspection test record for fire and gas device loop testing. It includes details of the fire and gas detectors such as type, tag number, and manufacturer. It lists commissioning checks to verify things like the completeness of pre-commissioning documentation, that cables and junction boxes are secure and undamaged, and that indications and displays activate correctly when the loop is tested. Reference drawings including loop drawings and cause and effect matrices are also noted. Space is provided for observations and remarks.

Uploaded by

Momo Itachi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
773 views

ITR-C (Instrument) 16c

The document is an inspection test record for fire and gas device loop testing. It includes details of the fire and gas detectors such as type, tag number, and manufacturer. It lists commissioning checks to verify things like the completeness of pre-commissioning documentation, that cables and junction boxes are secure and undamaged, and that indications and displays activate correctly when the loop is tested. Reference drawings including loop drawings and cause and effect matrices are also noted. Space is provided for observations and remarks.

Uploaded by

Momo Itachi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

INSPECTION TEST RECORD (ITR) - C

FIRE & GAS DEVICE LOOP TEST I16-C


Project No.
Project Title
Facilities
GENERAL
Platform/ Plant
Name
Sys Number Sys Description
FIRE & GAS DEVICE DATA
Type of Detector Heat Smoke Flam Gas Breakglass Other (To Specify):____
Tag Number Signal Range Manufacturer
Method of
Classifying Authority Model Number
detection
Area Protected EX Protection Serial Number
IP Rating Data Sheet Loop Drawing
COMMISSIONING CHECK OK N/A P/L No

1 Verify completeness of pre-commissioning checksheet I16-B

2 Verify no damage to the Fire & Gas device during transportation (offshore)

3 Verify all cables are secured and no damage

4 Verify the Junction Boxes are secured and no damage

5 Verify the correct electric power supply is connected to the Fire and Gas panel

6 Verify all tools/equipment/test kits for the loop test are available

7 Verify local indication/display (if applicable), are correctly activated upon testing of the loop

8 Verify all theindication/display in FGS Panel are correctly activated upon testing of the loop

Verify the indication/display in DCS (if applicable) are correctly activated upon testing of the
9
loop
Verify the indication/display and actions in Shutdown Systems (if applicable) are correctly
10
activated upon testing of the loop as per cause and effect matrix

11 Verify no dust inside Enclosure /Cabinet / Panel and insulation surfaces are clean.

12 Verify Instruments & its Accessories /Electrical equipment/Panel externally clean.

REFERENCE DRAWINGS
1 Loop Drawings
2 FGS Cause & Effect Matrix (if applicable)
3 Vendor Drawings
OBSERVATION / REMARKS

You might also like