Scribd
Upload
183 views

WPQ D1.1 - Single Process

This document records the performance qualification test for a welder. It lists the welder's information like name and ID number. It also documents the variables of the weld like the base metal, welding process used, filler metal, welding position and test results. The test was conducted and certified by the laboratory and approved to verify the welder's qualification according to the structural welding code for steel.

Uploaded by

Parminder Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
183 views

WPQ D1.1 - Single Process

This document records the performance qualification test for a welder. It lists the welder's information like name and ID number. It also documents the variables of the weld like the base metal, welding process used, filler metal, welding position and test results. The test was conducted and certified by the laboratory and approved to verify the welder's qualification according to the structural welding code for steel.

Uploaded by

Parminder Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

AWS D1.1/D1.

1M:2015 ANNEX M
WELDER WELDING OPERATOR OR TACK WELDER
PERFORMANCE QUALIFICATION TEST RECORD
Name Optional Test Date Rev.
ID Number Photo Record No.
Stamp No. Std. Test No.
Company WPS No.
Division Qualified To
Base Metal Specification Type or Grade AWS Group Size Schedule Thickness Diameter
No. (NPS)
Base Material
Welded To
VARIABLES ACTUAL VALUES RANGE QUALIFIED
Type of Weld Joint
Base Metal
Groove Fillet Groove Fillet
Plate Thickness
Pipe/Tube Thickness
Pipe Diameter
Welding Process ACTUAL VALUES RANGE QUALIFIED
Type (Manual, Semiautomatic,
Mechanised, Automatic)
Backing
Filler Metal (AWS Spec.)
AWS Classification
F - No.
Position
Groove - Plate & Pipe ≥ 24 in
Groove - Pipe < 24 in
Fillet - Plate & Pipe ≥ 24 in
Fillet - Pipe < 24 in
Progression
GMAW Transfer Mode
Single or Multiple Electrodes
Gas or Flux Type
TEST RESULT
Type of Test Acceptance Criteria Result Remarks

CERTIFICATION
Test Conducted By
Laboratory
Test No.
File No.

We, the undersigned, certify that the statements in this record are correct and that the test welds were prepared, welded and tested
in accordance with the requirements of clause 4 of AWS D1.1/D1.1M 2015 Structural welding code – Steel.

Manufacturer/Contractor Approved By

_______________________________ _________________________
Date: Date:

You might also like