Scribd
Upload
542 views14 pages

Chuwi Instal Ulang

This document provides instructions for flashing the BIOS, Android, and Windows on a tablet using various tools. It outlines the following steps: 1. Flash the BIOS first, then Android, and lastly Windows. Backup any important data before flashing as it will format the existing Windows installation. 2. To flash Android, use an Android flashing tool on a computer to select the firmware file and flash it to the tablet while pressing volume buttons. 3. To flash Windows, copy Windows image files to a USB drive, enter flashing mode by pressing keys at startup, and select the USB drive to flash Windows. The first startup after flashing may take longer.

Uploaded by

winda rachelina
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
542 views14 pages

Chuwi Instal Ulang

This document provides instructions for flashing the BIOS, Android, and Windows on a tablet using various tools. It outlines the following steps: 1. Flash the BIOS first, then Android, and lastly Windows. Backup any important data before flashing as it will format the existing Windows installation. 2. To flash Android, use an Android flashing tool on a computer to select the firmware file and flash it to the tablet while pressing volume buttons. 3. To flash Windows, copy Windows image files to a USB drive, enter flashing mode by pressing keys at startup, and select the USB drive to flash Windows. The first startup after flashing may take longer.

Uploaded by

winda rachelina
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 14

•tools： 8G USB disk， micro USB-OTG cable 、 HUB（ 3 interfaces or more)、

USB interface keyboard， as below:

Flash steps ：

1.First flash bios， then flash Android， last flash Windows.（ if it’s cause by the
system issues,you can pass the first step, no need to flash BIOS. ） 。

2.Flash Android will format the Windows memory,you can keep the Windows or
delete the Windows script,please backup the important data before you delete
Windows.

3.Flash the Windows,（ flashing the Windows alone will not affect Android ）

Notice： Make sure the battery has more than 50% charge,or keep charging .

（ If it’s reinstall system, you can not flash bios ， flashing

the wrong bios may result in no display,Please be cautious. ）

1.copy the bios file to USB Root directory， （ format the USB to fat32, entitled
WINPE）

2.Connect the tablet micro-USB to Hub， USB disk and USB keyboard plug into
HUB.

Press the power button to turn on (under the Off state) ， at the same time, press
F7 continuously to enter the flashing mo de.
3.Via the keyboard”↑ “ ↓ ” to select UEFI: San Disk , Partition 1press ”Enter”to
start flash Bios， it will turn on automatically.
1.First install the Android flashing tool on your home computer.
2.Start flash(click the upper right corner tool Browse... find the downloaded
Android firmware file and select flash.json ,Configuration:the second blank
without gpt,keep partition， if you have deleted please select the first blank and
flash the windows again ）

3.Select the firmware, under the off state keep pressing the volume”+” ”-” at the
same time,then press the power button to turn on.

After turn on the power button can be released, volume ”+” ”-” not,until it shows
【 DNX FASTBOOT MOOE..】 connect the computer to flash.After flashing it will
turn on and enter the Android language interface automatically.
1.format the USB disk, as below:

【 NTFS entitled WINPE】 （ it can’t be recognized if not entitled WINP ）


2.open win10 image file and copy the subfile to the root directory of the USB disk.

3.Connect the tablet micro-USB to Hub， USB disk and USB keyboard plug into
HUB.

Press the power button to turn on (under the Off state) ， at the same time, press
F7 continuously to enter the flashing mode.
4.Via the keyboard”↑ “ ↓ ” to select UEFI: San Disk , Partition 1press ”Enter”to
start flash Win， it will turn off after flashing.

1.
2.

The first time turn on the tablet will take a long time,please wait patiently to enter the language
interface , then select the language to enter the system.

Last：The programming will last about 5 to 10 minutes; the precise time is

dependent of Hub and U disk. The introduction is on basis of using the U disk 3.0.

High-speed programming lasts about 5 minutes.

TIPS：

Flash machine is risky, please follow the flash tutorial.thank you!

You might also like