Scribd
Upload
2K views4 pages

SPN 84/FMI 0 and SPN 84/FMI 11 Have Been Added

Solución de problemas boletin onformatibo

Uploaded by

Hamilton miranda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views4 pages

SPN 84/FMI 0 and SPN 84/FMI 11 Have Been Added

Solución de problemas boletin onformatibo

Uploaded by

Hamilton miranda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

NUMBER: 08 DDEC VI–65 S.M. REF.

: 20 ENGINE: EPA07 DD15 DATE: November 2008

SUBJECT: SPN 84 (CPC)

PUBLICATION: DDC-SVC-MAN-0029
SPN 84/FMI 0 and SPN 84/FMI 11 have been added.
SPN 84/FMI 0
This diagnostic condition is typically vehicle speed above programmable threshold 1 while driving.

NOTE:
This is an information only fault. It indicates the vehicle speed is above a programmable threshold. It
may be necessary to contact the truck owner or fleet manager to see if they have this feature enabled.

1. Does the fleet operator have this feature enabled?


[a] Yes, note the fault code in the repair order and clear the code only if the fleet or owner
requests it. Release the vehicle.
[b] No, go to next step.
2. Using DDDL/DDRS, change the CPC parameters highlighted below to 99 (actual value which
will be displayed in window is 98.92).

Figure 1 CPC Parameters


SPN 84/FMI 11
This diagnostic condition is typically vehicle speed above programmable threshold 2 while driving.

NOTE:
This is an information only fault. It indicates the vehicle speed is above a programmable threshold. It
may be necessary to contact the truck owner or fleet operator to see if they have this feature enabled.

1. Does the fleet operator have this feature enabled?


[a] Yes, note the fault code in the repair order and clear the code only if the fleet or owner
requests it. Release the vehicle.
[b] No, go to next step.
2. Using DDDL/DDRS, change the CPC parameters highlighted below to 99 (actual value which
will be displayed in window is 98.92).

Figure 2 CPC Parameters


ADDITIONAL SERVICE INFORMATION
Additional service information is available in the EPA07 DD13/DD15 Troubleshooting Manual,
(DDC-SVC-MAN-0029).

Detroit Diesel®, DDC®, Series 60® and the spinning arrows design are registered trademarks of Detroit Diesel Corporation.
© Copyright 2008 Detroit Diesel Corporation. All rights reserved. Printed in U.S.A.

You might also like