Scribd
Upload
33 views

Fadhil Muhammad (171321009) Muhammad Alfian D (171321019) Syahid Akmal (171321031)

This document lists 10 topics related to electrical engineering concepts: 1) maximum power transfer, 2) Thevenin's theory, 3) star-delta starters, 4) voltage regulation, 5) power factor, 6) spectral analysis, 7) National Science Foundation Network, 8) synchronous data communication, 9) power factor correction, and 10) electronic design automation. Each topic is accompanied by a brief description of its function or application in electrical engineering.

Uploaded by

alfian
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
33 views

Fadhil Muhammad (171321009) Muhammad Alfian D (171321019) Syahid Akmal (171321031)

This document lists 10 topics related to electrical engineering concepts: 1) maximum power transfer, 2) Thevenin's theory, 3) star-delta starters, 4) voltage regulation, 5) power factor, 6) spectral analysis, 7) National Science Foundation Network, 8) synchronous data communication, 9) power factor correction, and 10) electronic design automation. Each topic is accompanied by a brief description of its function or application in electrical engineering.

Uploaded by

alfian
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Nama : Fadhil Muhammad (171321009)

Muhammad Alfian D (171321019)


Syahid Akmal (171321031)

FUNCTION
1. Circuit Engineering (Chapter V, V.A. page 28, paragraph 1)
The function of maximum power transfer is to draw light on the idea that for maximum
external power to be obtained, an internal resistance needs to be in place.

2. Circuit Engineering (Chapter V, VB page 29, paragraph 1)


Thevenin’s theory is used to simplify an elaborate circuit into simple circuit.

3. Circuit Engineering (Chapter V , page 20 , Paragraph 2)


A star Delta Starter is used for reduces the starting current by connecting the motor
winding in Star at the time of starting. This reduces the voltage across the winding.

4. Electrical Circuit (Electrical Circuit Chapter 2, Page 2 paragraph 1)


Voltage regulation (Vr) is an important measure of the quality of a source. It is used
to measure the variation in terminal voltage between no load.

5. Electrical Circuit(Chapter IV, page 70, paragraph 1 )


Power factor is an important parameter in determining the amount of actual power
dissipated in the load. In practice, power factor is used to specify the characteristics a
load.

6. Introduction to Electrical Engineering (Chapter XIV, page 625 , Paragraph 4)


Foremost among signal concepts is spectral analysis (representation of signals in terms of
their frequency components), a concept that serves as a unifying thread in signal
processing and communication systems.

7. Introduction to Electrical Engineering (Chapter VI, Page 320, Paragaraph 1)


Nasional Science Foundation Network, that function as a single, cooperative virtual
network providing universal connectivity and application level services such as the
electronic mail.

8. Introduction to Electrical Engineering (Chapter VI, Page 324, Paragaraph 1)


Synchronous data comunication is used for transferring large amounts of data at high
speed. USARTS (Universal synchronous / asynchronous , receivers/transmitters) are
commercially available LSI devices.
9. Concepts in Electric circuits (Chapter 4, Page 1 , Paragraph 1 )
Power Factor Correction (PFC) is used to improve power factor and hence power quality,
utilising capacitors to offset usually inductive loads, for example motors. PFC systems
increase the efficiency of power supply, delivering immediate cost savings on electricity.

10. Circuit Engineering (Chapter 13, Page 79, Paragarph 1)


Electronic design automation (EDA) is a term for a category of software products and
processes that help to design electronic systems with the aid of computers. These tools are
often used to design circuit boards, processors and other types of complex electronics.

You might also like