Material Safety Data Sheet
MSDS Report
Prepared For: Shenzhen Pinnuo Energy Co., Ltd.
Building C, Zhongxinbao Low-carbon Technologies Industrial
Address: Park, Baihuadong Industrial 1st Road, Guangming New
District, Shenzhen, Guangdong
Product Name: Li-ion Battery
Model: PN 802540
Nominal Voltage: 3.7V
Rated Capacity: 800mAh, 2.96Wh
Weight: 15.6g
Dimension: 42.8mm×25.7mm×7.7mm (L×W×T)
Shenzhen TCT Testing Technology Co., Ltd.
Prepared By: 1B/F., Building 1, Yibaolai Industrial Park, Qiaotou, Fuyong,
Baoan District, Shenzhen, Guangdong, China.
Report No.: TCT181229M096
Written by: Approved by:
Inspected by: Date: 2019. 01. 03
Report No.: TCT181229M096 Page 1
This report shall not be reproduced except in full, without the written approval of Shenzhen TCT Testing Technology Co., Ltd.
Material Safety Data Sheet
Material Safety Data Sheet
Section 1- Chemical Product & Company Identification
Product Name: Li-ion Battery
Manufacture: Shenzhen Pinnuo Energy Co., Ltd.
Building C, Zhongxinbao Low-carbon Technologies Industrial Park,
Address: Baihuadong Industrial 1st Road, Guangming New District,
Shenzhen, Guangdong
Contact Person: Mr. Xiao
Tel: +86-755-33236178
Fax: +86-755-33236179
Emergency Tel: +86-755-33236178
E-mail: [email protected]
Item Code: TCT181229M096
Section 2- Hazards Identification
Classification of
See section 14.
Danger
Primary Route(s) of
Eye, skin contact, ingestion.
Exposure
The batteries are not hazardous when used according to the instructions of
manufacturer under normal conditions. In case of abuse, there’s Hazard of rupture,
fire, heat, leakage of internal components, which could cause casualty loss. Abuses
Health Hazard including but not limited to the following cases: charged for long time, short
circuited, put into fire, whacked with hard object, punctured with acute object,
crushed, and broken.
Report No.: TCT181229M096 Page 2 of 8
Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com
Material Safety Data Sheet
Section 3- Composition/Information on Ingredients
Concentration or
Chemical Name CAS Number
concentration ranges (%)
Lithium Cobalt Oxide (CoLiO2) 15-40 12190-79-3
Graphite 10-30 7782-42-5
Phosphate(1-), hexafluoro-, lithium 10-30 21324-40-3
Copper 7-13 7440-50-8
Aluminum foil 5-10 7429-90-5
Nickel 1-5 7440-02-0
Labeling according to EC directives.
No symbol and Hazard phrase are required.
Note: CAS number is Chemical Abstract Service Registry Number.
N/A=Not apply.
Section 4- First Aid Measures
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper
Eye and lower eyelids. Get medical aid.
Remove contaminated clothes and rinse skin with plenty of water or shower for 15
Skin minutes. Get medical aid.
Inhalation Remove from exposure and move to fresh air immediately. Use oxygen if available.
Give at least 2 glasses of milk or water. Induce vomiting unless patient is
Ingestion unconscious. Call a physician.
Section 5- Fire Fighting Measures
Characteristics of Dusts at sufficient concentrations can form explosive mixtures with air. Combustion
Hazard generates toxic fumes.
Hazardous
Combustion Carbon dioxide.
Products
Fire-extinguishing For small fires, use water spray, dry chemical, carbon dioxide or chemical foam.
Methods and
Report No.: TCT181229M096 Page 3 of 8
Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com
Material Safety Data Sheet
Extinguishing
Media
Attention in Wear self-contained breathing apparatus in pressure-demand, MSHA/NIOSH
Fire-extinguishing (approved or equivalent) and full protective gear.
Section 6- Accidental Release Measures
In case of rupture. Attention! Corrosive material.
Avoid contact with skin, eyes and clothing. Ensure
adequate ventilation. Use personal protective
Personal Precautions, protective equipment as required. Evacuate personnel to safe
equipment, and emergency procedures areas. Keep people away from and upwind of
spill/leak. Refer to protective measures listed in
Sections 7 and 8.
Prevent product from contaminating soil and from
Environmental Precautions entering sewers or waterways.
Stop the leak if safe to do so. Contain the spilled liquid
Methods and materials for Containment with dry sand or earth. Clean up spills immediately.
Absorb spilled material with an inert absorbent (dry
sand or earth). Scoop contaminated absorbent into an
acceptable waste container. Collect all contaminated
Methods and materials for cleaning up absorbent and dispose of according to directions in
Section 13. Scrub the area with detergent and water;
collect all contaminated wash water for proper
disposal.
Section 7- Handling and Storage
The battery may explode or cause burns, if
disassembled, crushed or exposed to fire or high
Handling temperatures. Do not short or install with incorrect
polarity.
Store in a cool, dry, well-ventilated area away from
Storage incompatible substances. Store locked up. Keep out
of the reach of children.
In case of rupture. Handle in accordance with good
industrial hygiene and safety practice. Avoid contact
Other Precautions with skin, eyes or clothing. Use personal protection
equipment.
Section 8 - Exposure Controls/Personal Protection
Engineering Controls Use adequate ventilation to keep airborne
concentrations low. If used under conditions that
Report No.: TCT181229M096 Page 4 of 8
Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com
Material Safety Data Sheet
generate particulates, the ACGIH TLV-TWA of
3 3
3mg/m respirable fraction (10mg/m total) should be
observed.
Eye and Face Protection: None required for
consumer use. If there is a Hazard of contact: Tight
sealing safety goggles. Face protection shield.
Skin and Body Protection: None required for
consumer use. If there is a Hazard of contact: Wear
Personal Protective Equipment protective gloves and protective clothing.
Respiratory Protection: No protective equipment is
needed under normal use conditions. If exposure
limits are exceeded or irritation is experienced,
ventilation and evacuation may be required.
Section 9- Physical and Chemical Properties
Appearance: Prismatic
Physical State Color: Silver
Odour: If leaking, smells of medical ether.
Change in condition
pH Not applicable as supplied.
Flash Point Not applicable unless individual components exposed.
Flammability Not applicable unless individual components exposed.
Relative density: Not applicable unless individual components exposed.
Solubility (water) Not applicable unless individual components exposed.
Solubility (other) Not applicable unless individual components exposed.
Section 10 – Stability and Reactivity
Chemical Stability Stable under recommended storage conditions.
Possibility of Hazardous Reactions None under normal processing.
Conditions to Avoid Exposure to air or moisture over prolonged periods.
Incompatible materials Acids, Oxidizing agents, Bases.
Hazardous Decomposition Products Carbon oxides.
Report No.: TCT181229M096 Page 5 of 8
Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com
Material Safety Data Sheet
Section 11 – Toxicological Information
In the event of exposure to internal contents, vapour
Irritation fumes may be very irritating to the eyes and skin.
Sensitization Not Available.
Reproductive Toxicity Not Available.
Toxicologically Synergistic Materials Not Available.
Section 12-Ecological Information
Do not allow undiluted product or large quantities of it
General note: to reach ground water, water course or sewage
system.
Anticipated behavior of a chemical product
in environment/possible environmental Not Available.
impact/ ecotoxicity
Section 13 – Disposal Considerations
Recycle or dispose of in accordance with
Waste Treatment government, state & local regulations.
Deserted batteries shouldn't be treated as ordinary
trash. Shouldn't be thrown into fire or placed in high
Attention for Waste Treatment temperature. Shouldn't be dissected, pierced,
crushed or treated similarly. Best disposal method is
recycling.
Section 14 – Transport Information
UN number 3480 & 3481
Lithium ion batteries (limited to a maximum of 30% SoC) or;
Lithium ion batteries packed with equipment (including lithium ion
Proper shipping name polymer batteries) or;
Lithium ion batteries contained in equipments (including lithium ion
polymer batteries).
Class or division 9 (Not subject to these Regulations)
Miscellaneous
Label(s) / Placard Required Lithium batt
Report No.: TCT181229M096 Page 6 of 8
Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com
Material Safety Data Sheet
Special precautions which a user needs to be aware of, or needs to comply with, in
connection with transport or conveyance either within or outside their premises
Can be shipped by air in accordance with International Civil Aviation
Organization (ICAO), TI or International Air Transport Association
ICAO / IATA:
(IATA), DGR Packing Instructions (PI) 965, PI 966 and PI 967 Section II
appropriate of IATA DGR 60th (2019 Edition) for transportation.
The batteries are not restricted to IMDG Code 2018 Edition (Amdt
IMDG CODE:
39-18) according to special provision 188.
Other requirements for the US Department of Transportation (DOT)
DOT: Subchapter C, Hazardous Materials Regulations if shipped in
compliance with 49 CFR 173.185.
The batteries are not subject to the provisions of United Nations
Economic Commission for Europe (UNECE) ADR/ADN if they meet the
ADR/ ADN:
requirements of special provision 188 of Chapter 3.3. Applicable as from
1 January 2019.
In addition, to be permitted in transport each lithium cell and battery types must have passed the applicable
tests set out in Subsection 38.3 of the UN Manual of Tests and Criteria.
Section 15 – Regulatory Information
Dangerous Goods Regulations
Recommendations on the Transport of Dangerous Goods-Model Regulations (20th revised edition)
Recommendations on the Transport of Dangerous Goods-Manual of Tests and Criteria
International Air Transport Association (IATA)
International Maritime Dangerous Goods (IMDG Code 2018 Edition Amdt 39-18)
Technical Instructions for the Safe Transport of Dangerous Goods
Classification and code of dangerous goods (GB 6944-2012)
2012 OSHA Hazard Communication Standard (29 CFR 1910.1200)
Toxic Substance Control Act (TSCA)
Code of Federal Regulations
In accordance with all Federal, State and local laws
Report No.: TCT181229M096 Page 7 of 8
Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com
Material Safety Data Sheet
Section 16 – Additional Information
MSDS creation date: 2019 Version: 1.0
Sample photo:
To the best of our knowledge, the information contained herein is accurate. However, neither the above
named supplier nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness
of the information contained herein. Final determination of suitability of any material is the sole responsibility of
the user. All materials may present unknown hazards and should be used with caution. Although certain
hazards are described herein, we cannot guarantee that these are the only hazards that exist.
The data/information contained herein has been reviewed and approved for general release on the basis that
this document contains no export controlled information.
******End of report******
Report No.: TCT181229M096
Shenzhen TCT Testing Technology Co., Ltd.
1B/F., Building 1, Yibaolai Industrial Park, Qiaotou, Fuyong, Baoan District, Shenzhen, Guangdong, China
Search Number: TCT181229M096C
Search System: http://www.tct-lab.com/cn/search.asp Page 8 of 8
